Auto levelling 3d printer

6 Affordable Auto Leveling 3D Printers To Save You Time & Hassle

Manual leveling is tedious, repetitive, and exposes you to the more underrated component of failed prints — human error. Wouldn’t it be great to automate all the boring stuff away, and get to printing? It’s good news for you then, as auto-leveling 3D printers have become more and more affordable.


Anycubic Kobra

One of the cheapest self-leveling printers around.

Performed well in our review.

Available at:

Anycubic hereAmazon here


Creality Ender 3 S1

Builds on Ender 3’s success with extra power and auto-leveling

Improved direct drive extruder

Available at:

Creality hereAmazon here


Prusa i3 MK3S+

One of the best 3D printers for $1000 with great auto-leveling

Durable, accurate, it’s perfect

Available at:

Prusa here

What is an auto-leveling 3D printer?

An auto-leveling 3D printer is one that comes equipped with the necessary kit (sensors) to automatically detect the distance between the nozzle and the print bed.

Prior to auto-leveling, makers worldwide had to manually adjust their 3D printer’s bed so it was at the correct distance away from the nozzle. This was time-consuming, annoying, and put beginners off. Moreover, you’d have to re-level your 3D printer every few prints as the bed began to fall out of alignment over time.

Having a self-leveling 3D printer saves you time and hassle, so you can get to doing the fun things like printing your favorite models.

These auto-leveling printers have proximity sensors near the tip of the nozzle and detect where the print bed is across various points on the print bed. For example, the Creality CR-10 Smart has 16 points spaced evenly across the print bed that the nozzle probes to get distance data.

With this data, the 3D printer’s firmware can make adjustments on the distance the nozzle comes to the print bed during the 3D printing process.

For example, if one side of the print bed is slightly uneven, the printer adjusts to this and ensures that the nozzle and bed remain the same distance apart throughout the print, improving bed adhesion and print quality.

Generally, the ideal distance between the printer nozzle and bed is around 0.1mm, but this can vary.

Problems that can occur if the nozzle is too close to the print bed include:

  • Scratch marks on the print bed
  • Filament will be unable to extrude, especially in the first few layers
  • Can clog your nozzle

Problems that can occur if the nozzle is too far away from the print bed include:

  • Bad adhesion 
  • Filament will curve and twist around the nozzle rather than being deposited
  • Poor print quality

Either way, badly optimized bed leveling causes bad adhesion and worse print quality, so it’s key to do this properly. Even with an auto-leveling 3D printer, it can be worth manually calibrating everything every once in a while to ensure your settings are spot on.

What are the advantages of a 3D printer with automatic bed leveling?

  • Better print quality and bed adhesion
  • More accessible for less experienced beginners
  • Saves you time and hassle manually leveling the 3D printer
  • Human error can affect manual leveling

Therefore, a level print bed is crucial for high-quality prints. If you’re trying to avoid constantly ruined, sloppy-looking prints caused by poor layer adhesion, go for a self-leveling 3D printer.

Can you upgrade a 3D printer to auto level?

Yes, you can, and many makers opt to upgrade their printer so that it can auto level. Many 3D printer auto-leveling kits are available, but check the kit you’re interested in is compatible with your printer.

Some popular 3D printer auto-leveling kits include:

  • BLTouch — kits Available on Amazon here
  • CRTouch — Creality’s version — Available at Creality here / Amazon here

These kits come with firmware, such as Marlin, which when placed where your printer’s z-stop is, learns the height of the build plate, and makes adjustments based on these measurements.


Best XYZ Reviews – Full Round-Up

  • Anycubic Kobra: Best budget pick
  • Flashforge Adventurer 3 Lite: Best enclosed low-cost option
  • Anycubic Vyper: Similar to Kobra but slightly upgraded (but costs extra)
  • Ender 3 S1: Best auto-leveling 3D printer under $500
  • Prusa i3 MK3S+: Best for $1,000
  • Ultimaker S3: Best for professional use, or if budget is no issue for you

The best auto-leveling 3D printers

3DSourced is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Anycubic Kobra – cheapest auto-leveling 3D printer

  • Price — Check latest price at Anycubic here / Amazon here
  • Automatic Bed Leveling: Anycubic LeviQ
  • Leveling Points: 25 points
  • Build Volume: 220 x 220 x 250 mm
  • Minimum Layer Height: 50 microns

The Anycubic Kobra is the cheapest 3D printer with a self-leveling bed around and a thrifty way to get all the time-saving benefits at a price that won’t scare away 3D printing novices. Launched in early 2022, it’s a machine designed to make 3D printing easier for newcomers by removing the more hands-on aspect of setup and tinkering.

Anycubic has equipped the Kobra with its in-house developed mesh point ABL 3D printing system, the LeviQ. It measures the bed at 25 distinct points, stores the data, and adapts the printing process to mitigate surface inconsistencies.

We had the chance to spend some quality time with the Kobra, and we couldn’t have been more impressed with the Levi Q system. The probe automatically levels the bed in just a few minutes with a single click. You can also fine-tune Z offset on the fly to get those flawless layers, thanks to an easily accessible setting in the intuitive display UI.

Elsewhere, the Anycubic Kobra has features we’ve rarely seen at this price. There’s a smart direct drive extruder, Anycubic excellent coarse PEI-coated removable magnetic bed, and a well-sized 220 x 220 x 250 mm build volume, all housed in a compact machine that won’t take up too much space.

Specifications are one thing, but the Anycubic backs them up with solid quality prints out-of-the-box. As with most budget printers, there’s some software tinkering involved to get the very best results, but once there, the Anycubic positively sings when fed PLA, TPU, and PETG.

In many ways, the Anycubic Kobra has redefined what we should expect from low-cost printers and, for our money, is hands down the best 3D printer under $300 currently on the market.

Flashforge Adventurer 3 Lite

  • Price: $339 — Available at Flashforge Official store here / Available on Amazon here
  • Build volume: 150 x 150 x 150

If you’ve got younger kids that you want to get involved in 3D printing, the Adventurer 3 Lite is perfect. It’s enclosed, so it keeps any curious child’s hands safely locked away from the nozzle while printing, with this enclosure also benefiting your prints as you can more effectively control the temperature, and reduce warping.

The Flashforge Adventurer 3 Lite is one of the cheapest 3D printers with auto-leveling, another feature that makes it ideal for beginners or kids, letting you skip all the hassle and get straight to the fun printing. The removable heated bed makes it easier to remove prints after printing, and despite its appeal as a basic, easy-to-use printer, it can still print tougher filaments like PETG.

It also comes with a filament run-out sensor, switching off automatically in the event of a power cut or similar failure, pausing your print so you can resume without ruining your model, and it’s very quiet, so it won’t disturb you too much if you’re working or relaxing in the same room.

Anycubic Vyper

  • Price: $429 — Available on Anycubic Store here / Available on Amazon here
  • Build volume: 245 x 245 x 260 mm

Another low-priced self-leveling 3D printer, the Anycubic Vyper’s 1-click auto-leveling system automatically adjusts based on the data gained from each of 16 different points across the print bed to optimize printing.

Despite the large build volume, it’s a compact printer that doesn’t take up too much space, and when we recently tested it out we were impressed with the print quality. Though we didn’t run it too fast, Anycubic say that with the Vyper’s new fan cooling system you can print faster without a noticeable loss in print quality — at up to 100mm/s.

The new 32-bit motherboard and control chip makes it more powerful than previous Anycubic 3D printers, making for better precision and quieter printing. The large 4.3-inch touchscreen is a nice bonus, and the UI is easy to use to get printing and change each setting. Another great feature is the new and improved double gear extrusion system within the extruder, making flexible filaments like TPU easier to print and prevents tangling, and also makes standard PLA printing more reliable.

Overall, we were impressed when we tested the Anycubic Vyper, and if you’re looking for a high-quality 3D printer that auto levels for a good price, this could be the one for you.

You can read more in our full Anycubic Vyper test here.

Ender 3 S1 / S1 Pro

  • Price — Check price at Creality store here / Amazon here
  • Automatic Bed Leveling: Creality CR Touch Auto Leveling
  • Leveling Points: 16 points
  • Build Volume: 220 x 220 x 270 mm
  • Minimum Layer Height: 50 microns

Emerging from one of the longest-running and best-selling 3D printing legacies, the Ender 3 S1 is the new, more sophisticated version of the Ender 3 – with two versions, the Ender 3 S1, and S1 Pro, with subtle differences.

In our review of the Ender 3 S1 Pro, we noted how Creality has gone to considerable lengths to make the printer a tinker-free, set-and-forget incredibly welcoming to beginners, and improved a number of key areas.

Both the Ender 3 S1 and S1 Pro have key upgrades, such as automatic bed leveling – a first for the Ender 3 family. Creality has used its self-developed BLTouch look-alike, the CR Touch.

It measures 16 points across the bed to provide the printer with all the data needed to compensate for different surface heights and deliver optimal printing. Unlike some automatic bed leveling systems, the CR Touch keeps its calibration sharp and trim even after multiple prints.

Of course, you could always buy an Ender 3 for dirt cheap and install a CR Touch yourself. It would be a viable option if it weren’t for the stacks of extra features found on the S1.

The Sprite dual-gear direct drive extruder is worth mentioning, as is the fantastic PC spring steel sheet, sleek LCD, extremely quiet 32-bit motherboard, and a larger 270mm maximum print height (vs 250mm on the Ender 3). Not only does it feature auto bed leveling, it’s also very accurate and precise (example print of a cat on the right), and very quiet (we measured it to be 36dB in our test on the left).

The Ender 3 S1 does cost more for all these upgrades, so whether the extra features are worth the additional spend comes down to budget and convenience. The Ender 3 is still one of the top budget picks, but you’ll have to invest time, effort, and money to spruce up to anything comparable to the Ender 3 S1.

And if you’re deciding between the S1 and S1 Pro for an auto-leveling 3D printer under $500, this really depends on what you want to print. The S1 Pro has an all-metal direct drive extruder that can reach 300°C, so if you want to print high-temp filaments like Nylon or PC, absolutely go for the S1 Pro. If not, you might be fine with the standard S1.

It’s also worth noting that the brand-new Ender 3 Neo range also now come with auto-bed leveling, so it’s more a question of whether you want the other upgrades on the S1 range.

Prusa i3 MK3S+ — reliable auto-leveling 3D printer

  • Price: $749 as a kit / $999 assembled — Available on Prusa Store here
  • Build volume: 250 x 210 x 210 mm

Prusa printers have been known as the most reliable, hassle-free, and high-quality 3D printers around for years, winning boatloads of awards and selling hundreds of thousands of 3D printers.

The latest version, the i3 MK3S+, comes with improved first layer calibration via the new SuperPINDA probe, and a range of other key design improvements. The automatic mesh bed leveling is flawless and keeps everything optimized, and the print platform’s removable PEI spring steel sheets make it easy to remove your finished prints without having to strain and risk damaging your print while scraping it off the bed in an awkward position.

Other quality-of-life features include the filament runout sensor, power loss recovery to save where you are in your print, key safety features, and it’s very quiet while printing.

Prusa printers are also open source, so you can use third-party filaments, and the i3 MK3S+ is powerful enough and can reach high enough nozzle temperatures to print filaments like ASA, Polypropylene, Polycarbonate, HIPS, Nylon, and carbon filled filaments, beyond the standard ABS and PLA.

Overall, if you’ve got the extra money to spend, go for the Prusa and you won’t be disappointed.

Ultimaker S3 – premium auto-leveling option

  • Price: $4,080 — Available on Dynamism here / Available on Matterhackers here
  • Build volume: 230 x 190 x 200 mm

The premium, high-quality auto-leveling 3D printer option, the Ultimaker S3 guarantees a hassle-free printing experience. Designed for prototyping and for business use, the S3 features advanced auto bed leveling via automated calibration settings. These settings measure the build platform’s coordinates and automatically adjust without you needing to manually intervene — it’ll just stay level and optimized.

It’s also a dual extruder auto-leveling 3D printer, so you can print with PVA and PLA for dissolving filaments, as with HIPS and ABS, and a range of other filaments. 

The Ultimaker S3 is also incredibly accurate, able to print precise parts of up to 20-micron resolutions. At this level of precision, it’ll be slow, but the results will be fantastic. It’s expensive and usually reserved for more professional use, but functions fantastically as an auto-leveling printer for a range of uses.

For premium machines, read our buyer’s guide for commercial 3D printers.

Do 3D Printers Need Auto Leveling?

No, 3D printers don’t strictly need auto bed leveling, but it’s a helpful feature to have because it removes the need to manually level the bed, which can be both time-consuming and frustrating for beginners.

What is the best auto-leveling 3D printer?

The best cheapest auto-leveling 3D printers for ABL 3D printing include the Anycubic Kobra, Creality Ender 3 S1, and Flashforge Advenurer 3 Lite, but if you’re willing to spend a little more, the Prusa i3 MK3S+ is a fantastic self-leveling 3D printer.

What are the best self-leveling bed sensor kits?

The BLTouch auto-leveling sensor probe is a widely used and highly-rated self-leveling 3D printer kit, which is compatible with many different printers and brands. Creality also sell their own version, the CRTouch, and there are other options also.

Best 3D Printers with Auto Leveling

3D printers are complex machines, with all the parts having to work coherently to provide high-quality results. So, precise adjustment of the distance between the print nozzle and the build plate is extremely important, unless you want your prints to be ruined by poor first layer adhesion.

This is Top 3D Shop, and in this article, we will touch upon the feature of automatic bed leveling, as well as look at some of the best 3D printers offering this function.


How does auto bed leveling work?

Manual print bed leveling can be pretty tiresome and time-consuming, especially for those who are new to 3D printing. Besides, the process should be repeated after a few prints, as the bed’s position can slightly change. Fortunately, a lot of 3D printers today, including entry-level consumer models, come with an automated bed leveling function that makes the process easy and quick.

The auto bed leveling function implies using a built-in proximity sensor near the tip of the nozzle. When activated, the sensor measures the distance between the nozzle and the print bed at several points on the print bed. Based on these calculations, the firmware adjusts the position of the print head right on the go, to keep the even distance between the nozzle and the bed over the entire build area during printing.

If you want to learn more about this function, read our Auto Bed Leveling Guide.


Do you need a 3D printer with auto bed leveling?

In short — yes, auto bed leveling is worth its money, as it saves a lot of time, and allows the user to avoid print failures caused by a poorly leveled print bed.


On the other hand, if you are an experienced user, and you don’t mind spending time on manual bed leveling (and know pretty well how to do it properly), you can, probably, do without this useful feature.

If you are new to 3D printing, the auto bed leveling function will help you avoid such troubles, as poor first layer adhesion, nozzle clogging caused by too close position of the nozzle to the print bed, or scratching the print bed.


Can you upgrade a 3D printer to employ auto leveling?

If your 3D printer is not equipped with this function, you can upgrade it with an optional auto bed leveling (ABL) sensor available in the market.

There are various types of ABL sensors, the BLTouch being the most popular. It’s a mechanical sensor, consisting of a microcontroller, a Hall sensor, a magnetic switch, and a pin probe used for measuring the distance between the nozzle and the print bed. Since the sensor uses physical contact for calculating the distance, there are no restrictions for the print bed material. You are free to use the BLTouch sensor with glass, metal, or any other print bed type. The sensor is mounted near the nozzle tip and connected to the motherboard. When the pin touches the print surface, it immediately retracts, causing changes in the electromagnetic field and triggering the magnetic switch. In such a way the sensor checks several points on the print bed, and its position is calculated from the values obtained. It’s important that your print bed is absolutely clean when using BLTouch, as any material residues, for example, may lead to inaccurate calculations. 

The BLTouch sensor can be used with most of the 3D printers in the market, but it is recommended to check your printer compatibility just to make sure.


Best budget 3D printers with auto bed leveling

Artillery Genius Pro

The Artillery Genius Pro is a compact FDM 3D printer featuring the build volume of 220 x 220 x 250 mm and the Titan direct drive extruder with a 0.4 mm Volcano nozzle, that enables uniform filament extrusion and provides decent print quality with the minimum layer height of 100 microns. The extruder of the Genius Pro, unlike the original Genius model, is equipped with a touch sensor enabling the auto bed leveling function. The maximum nozzle temperature is 240 °C. The print bed, made of tempered glass, can heat up to 120 °C in 3 minutes. The printer is compatible with PLA, ABS, wood composites, PVA, HIPS, and flexible materials. The filament runout sensor and the resume printing function prevent possible print failures. The Genius Pro is compatible with Cura, Simplify3D, and Slic3r software and is operated via a 2.8" color touchscreen. The device comes as a kit, requiring self-assembly.


  • Auto bed leveling
  • Low-noise printing due to quiet stepper-drivers
  • Heated build plate
  • Filament runout sensor
  • Resume printing function
  • Wide materials compatibility
  • Lack of enclosure
  • No wireless connection
  • Needs self-assembly


Creality Ender-3 S1 Pro

The Ender-3 S1 Pro is a compact FDM 3D printer capable of working with high-temp materials, like Nylon and Polycarbonate, alongside other popular filaments, such as PLA, ABS, wood composites, TPU, and PETG. The full-metal dual-gear direct extruder is equipped with a brass nozzle that can reach the temperature of 300 °C. The PEI-coated flexible magnetic build plate, made of spring steel, ensures proper first layer adhesion and easy removal of the printed part. The printer has a build volume of 220 x 220 x 270 mm and provides the minimum layer height of 50 microns, which is good for an entry-level FDM machine. The auto bed leveling function uses CR Touch probe to measure 16 points on the print bed and adjust the print head. The machine also features the filament runout sensor and resume printing function.


  • Auto bed leveling
  • High-temperature materials compatibility
  • Heated print bed
  • Decent print quality
  • Flexible magnetic build plate
  • No enclosure


Anycubic Vyper

The Anycubic Vyper is another entry-level FDM printer that comes semi-assembled and features a modular design, allowing for easy upgrades. Like all the models in our list, the Vyper sports the auto bed leveling system, which uses a pressure sensor, activated when the nozzle hits the print bed, providing 16-points precise bed leveling. The build volume of 245 x 245 x 260 mm is quite decent for a compact desktop device. The printer is equipped with a dual-gear extrusion system with two cooling fans that allow printing with PLA-like materials. The maximum nozzle temperature is 260 °C. The heated spring steel magnetic build plate with a scratch-resistant coating ensures good adhesion and easy removal of the prints. The Anycubic Vyper is operated via a 4.3" touchscreen; the recommended software is Cura slicer.


  • Auto bed leveling
  • Decent build volume
  • Heated print bed
  • Easy operation
  • Modular design for easy upgrades
  • No enclosure


Best mid-range 3D printers with auto bed leveling

FlashForge Guider 2

The FlashForge Guider 2 is an FDM 3D printer featuring professional-grade quality, yet affordable price. The Guider 2 has the auto bed leveling function but, unlike the other printers in this article, it’s an assisted automatic process. That means the printer gives the user instructions during the calibration process, rather than automatically adjusts the position of the print head while printing. A removable heated print bed and an enclosed build chamber allow printing with ABS-like filaments. The device features a spacious build volume of 280 x 250 x 300 mm. The filament runout sensor and resume printing function stand for the reliability of the printing process. The printer comes with the FlashPrint proprietary slicer.

Credit: @matisboerodisign / instagram

  • Affordable price
  • High quality of printing
  • Wide range of compatible materials
  • Removable heated print bed
  • Resume printing function
  • Filament runout sensor
  • The printer is quite heavy
  • The prints are difficult to remove from the bed


Creality CR-5 Pro HT

Due to the maximum nozzle temperature of 300 °C and the fully-enclosed build chamber, the Creality CR-5 Pro High-Temp version can print with high-temperature materials, like PLA, TPU, ABS, and others. The carbon glass-coated print bed can heat up to 110 °C and features a BLTouch auto leveling function. The build chamber dimensions of 300 x 225 x 380 mm allow printing large models or multiple smaller parts at a time. Consistent failure-proof printing is provided by the filament runout sensor, resume printing function, and cloud printing support. The CR-5 Pro HT can be operated via a 4.3" touchscreen, or remotely with the Creality Cloud application.

  • Auto bed leveling
  • Large build volume
  • Heated carbon glass-coated print bed
  • Wide range of compatible materials, including high-temp filaments
  • Cloud printing support
  • Filament runout sensor
  • Wide connectivity options
  • 100 microns minimum layer height 

Credit: @Just Vlad / youtube


Best professional 3D printers with auto bed leveling

Raise3D E2

The Raise3D E2 is a professional FDM 3D printer, boasting a great number of advanced functions that stand for industrial-grade quality and consistency of the printing process. The device is equipped with the IDEX dual extrusion system with two independent extruders, that allow printing the same model in mirror or duplication mode, or printing dual color or dual material parts. The maximum nozzle temperature of 300 °C gives the possibility to print with a great number of filaments, like PLA, ABS, HIPS, PC, TPU, TPE, NYLON, PETG, ASA, PP, PVA, carbon and glass-filled, and others.The standard 0.4 mm nozzle can be replaced with optional 0.2–1.0 mm nozzles, if needed. The printer sports an automatic multi-zone bed leveling system with a BLTouch sensor. Other smart features include a built-in camera and a filament runout sensor.

Credit: @3deltaworkshop / Instagram

  • Auto bed leveling
  • IDEX dual extrusion system
  • 20 microns minimum layer height
  • Built-in camera
  • Wide material compatibility
  • Enclosed chamber with a HEPA filter
  • Door opening detection
  • Auto bed leveling takes quite a while


Raise3D Pro3

The Raise3D Pro 3 professional FDM 3D printer features a sizable build volume of 300 x 300 x 300 mm. The bed auto leveling function ensures a perfectly even print area which improves the first layer adhesion, and the flexible steel build plate makes for the convenient removal of the printed parts. The Pro 3 is a dual extrusion system with two independent extruders and interchangeable nozzles with available diameters of 0.2–1.0 mm. The printer is an open-material system, allowing for the use of third-party materials alongside the proprietary filaments. A set of smart features, like built-in camera and door opening detection, provide a smooth printing experience.

Credit: @okada_ss / Instagram

  • Auto bed leveling
  • 10 mm minimum layer height
  • High print quality
  • Dual extrusion system
  • Large build volume
  • HEPA air filter
  • Wide range of compatible materials
  • Requires nozzle upgrades for printing with carbon fiber


Fusion3 Edge

The Fusion3 EDGE is a fast professional FDM 3D printer with a large build volume of 368 x 368 x 343 mm and the minimum layer height of 20 microns. Due to the proprietary ANVIL print head with the maximum temperature of 320 °C, and wear-resistant surgical steel print tubes, the EDGE can print with high-temp and abrasive materials. The printer is equipped with a 1/4" aluminum print bed with standard glass surface and can be upgraded with an optional magnetic build plate. The flat surface combined with the mesh probe bed leveling system ensure perfect first layer adhesion. The multi-zone print bed can heat up to 145 °C, and the temperature in the passively heated build chamber reaches 70 °C. 

  • Precise auto bed leveling system
  • Extremely high print speed
  • Exceptional print quality
  • Fully enclosed heated build chamber
  • Heated print bed
  • Wide range of compatible filaments, including third-party materials
  • Affordable price
  • Bowden extruder (may require upgrades and profile management when working with flexible materials)


Best large-format 3D printers with auto bed leveling

Modix Big 60 V3

The Modix Big 60 V3 is an affordable large-format FDM 3D printer. Like all the Modix printers, the Big 60 V3 comes as an assembly kit and features modular design allowing for easy upgrades. The V3 version is based on the previous Big 60 V2 model; the improvements include a 10% larger build volume of 600 x 600 x 660 mm and the new Duet 2 powerful controller unit, which offers a lot of enhancements, like Wi-Fi connectivity, remote control option, or dual extrusion support on the main board (and up to five more extruders on the optional expansion board). The automatic bed leveling function, using BLTouch probe with 100 points probing mesh, is activated before each print. The machine is capable of working with high-temp materials, and can print at 40-micron minimum layer height, providing industrial-grade print quality and consistency.

Credit: @hwangjoonha_ / Instagram

  • Auto bed leveling
  • Modular design allowing for easy upgrades
  • Large build volume
  • Industrial-grade print quality and speed
  • Wide range of compatible materials
  • 7" operating touchscreen
  • Affordable price
  • Self-assembly is time-consuming
  • Many features, like an enclosure, come as an option only


Modix Big 120X V3

The Modix Big 120X V3 is another large FDM printer from the BIG family, featuring an impressive build volume of 1,200 x 600 x 640 mm, which allows you to print parts of almost any size. The machine is a self-assembly kit with the same open modular structure, as the other Modix Big printers. The enclosure comes as an option and should be bought separately. The Big 120X V3 is equipped with the new Griffin print head with the maximum hotend temperature of 285 °C, which can be further converted to 500 °C. The aluminum heated build plate features auto leveling function with the 200-point probing mesh. Modix offers a variety of components you can buy in addition to the basic package, like DUEX expansion board, E3D V6 and Super Volcano hotends, a magnetic print bed, and more.

Credit: @rebeca_gi_sa / Instagram

  • Auto bed leveling
  • Huge build volume
  • Modular system
  • Heated print bed
  • Wide range of compatible filaments
  • Compatibility with any slicing software
  • Enclosure should be bought separately
  • Takes a lot of time to assemble


Creatbot D600 Pro

The Creatbot D600 Pro is a large-scale FDM 3D printer featuring a build volume of 600 x 600 x 600 mm and a dual extrusion system with the maximum nozzle temperature of 420 °C. Combined with the heated ceramic-glass print bed and the hot air chamber, maintaining the constant temperature of up to 70 °C, this allows the D600 Pro to print with high-performance materials, like high-temp nylons, carbon fiber-filled thermoplastics and PC. The precise auto bed leveling system using BLTouch sensor greatly adds to print quality, ensuring proper first layer adhesion. The printer comes with free CreatWare software based on the popular Cura slicer.

Credit: @3dprimade / Instagram

  • Auto bed leveling
  • Huge build volume
  • Heated build chamber
  • Printing with engineering-grade materials
  • Filament drying room
  • Small build chamber door

Who creates the best work as a 3D printer client?・Cults

BLU-5 is one of the most affordable desktop 3D printers we've ever made. It offers the largest print area of ​​any TwoTrees 3D printer, the most consistent performance, and is suitable for users of all skill levels.
Its all-metal base and frame provide durable performance. Simple, elegant design combined with outstanding performance makes the BLU-5 a toy for DIY enthusiasts, as well as a professional printing machine for designers and factories.
Here is a video review made by Aurora Tech, you can search for other video reviews of the BLU-5 printer on Youtube (formerly known as BLUER Plus).

90% pre-assembled, easy to install

BLU-5 comes with 90% pre-assembled parts that require minimal installation. Most installations can be easily done with hex wrenches.
To ensure that users receive devices without printing problems, each device is assembled for a 3D cube print test prior to shipment. Few factories test the print before shipping as it is time consuming and labor intensive.

90% Finished Desktop 3D Printer

Smart 3D Touch Sensor and Auto Leveling

The BLU-5 also features a built-in 3D touch sensor that allows the printer to check if the build platform is level and apply if necessary. adjustments.
After checking that each part is installed correctly, alignment is recommended and required before printing. The alignment and leveling function in Tool Settings (on the touch screen) allows you to move the nozzle and 3D touch sensor around multiple points and register the position of each one. If the distance between the dot, nozzle and print bed differs from other dots, the software automatically starts the alignment process.

Integrated 3D touch sensor

Large print area for more options

Compared to other TwoTrees consumer 3D printers, BLU-5 is the largest 3D printer with 300*300*400mm print area. It is also one of the best large-scale 3D printers available in the consumer market. The print size of 300*300*400mm provides enough space for most DIY projects and allows users to complete printing of multiple models in one print. If you're not sure what size you need, the BLU-5 is a good budget option if you take everything into account.

Large 3D Printer

Patent Development: Automatic Space Adjustment Function

The basic working principle of FDM 3D printing requires that the print head and print platform move in sync with the design file. Since 3D printing is extremely demanding on precision, any imperceptible defect can cause the print to fail or become distorted.
Patented auto-spacer kit with spring kits greatly reduces motion-induced vibration for high precision and smooth printing.

Auto interval function

Quiet operation: TMC2209 mute driver

One of the main disadvantages of using FDM 3D printers is annoying noise.
The TMC2209 Mute Driver reduces running motor noise and makes 3D printing an enjoyable experience.

Dual Z-Axis and Synchronous Belt

Instead of a single Z-axis lead screw, the BLU-5 uses two lead screws with a synchronous belt for smoother movement and faster response.
This unique setting effectively reduces vibration and improves print accuracy and speed.

Z-Axis Twin Guide Screws

Transparent Dual Stage Extruder

Compared to 3D printers with single stage extruders, the BLU-5 uses dual stage extruders to provide greater stretching force to achieve more stable and smooth extrusion.
Transparent housing allows users to observe and control the entire process with the naked eye.

Packed PEI greenhouse

Although the PEI greenhouse is a basic accessory for 3D printers, users usually have to pay extra for it from most vendors.
To provide users with a print-ready desktop 3D printer, a PEI greenhouse is included with the BLU-5 printers.
Thanks to the resilient and wear-resistant surface, you can easily remove printed designs.

RJ45 jack

Instead of using other jacks, the BLU-5 uses the common RJ45 interface for connection, which is much more readily available in local stores and easier for users to find replacements on demand.
RJ45 is also more reliable and efficient in signal transmission.

RJ45 jack

Filament running out detection function and printing resume when power on

It is quite normal when filaments run out during printing, and restarting wastes a lot of time and money on filaments. To solve this problem, all TwoTrees 3D printers are equipped with an intelligent low filament sensor and a restart function.
Whether printing is interrupted due to a power failure or a broken filament, the printer will resume printing at the exact layer or position where it left off.

Thread flow detection

  • X and Y belt tensioner allows users to make proper adjustments without the need for additional tools.
  • Removable motherboard service cover makes motherboard replacement much more convenient.
  • The 4.3-inch touch screen control panel provides a clear, simple interface and fast response to every touch.
  • All-metal base and frame make the 3D printing machine strong and durable for long-term use.

Click to use promo code
(coupon code automatically added at checkout).

Established in 2017 as a manufacturer of 3D printer accessories, TwoTrees is rapidly growing into one of the world's most trusted companies in the development, production and marketing of desktop FDM 3D printers. In addition, TwoTrees is the pioneer of self-developed laser engraving machines in China. Today, our business includes FDM 3D printers, filaments, resins, as well as laser engraving machines and related accessories that have a global reach.
With R&D teams and a dedicated experimental studio, we promise to always maintain a customer-oriented concept to provide more cost-effective innovative products.
TwoTrees is pursuing its growth strategy as a highly dynamic company that expects continuous growth.

This page has been translated using machine translation. Suggest the best translation




3D Printer Auto Calibration

Desktop Auto Calibration is a feature available on some FDM 3D printers by default from the factory. In addition, experienced technicians can install the auto-calibration sensor themselves.

In this article we will tell you what this function is for and how to use it.

Why Calibrate the Platen

Most FDM 3D printers are devices that require the active participation of the master in the process of preparing for printing. One of the features of the devices is the need to regularly check the level of the printed table. Over time, the design of an FDM 3D printer can become loose. And this is due not only to the adjusting screws of the table, but also to the backlash of absolutely all screw connections. Most often this is manifested in vibrations during the printing process.


As a result of the deviation of the table from the set level, the distance between the extruder nozzle and the printing table changes, by different distances at different points. This can lead to deformation of the printed model, distortion of dimensions and proportions, clogging of the extruder (when the nozzle is close to the table and the plastic cannot come out).

This may be caused by a missing thread lock and poor quality platform leveling screws. Also, the error can be caused by the user's actions, for example, if he unevenly pasted adhesive tape on the printed table.

To avoid problems, the user should calibrate the platen regularly. In budget models, this work is done manually. To do this, the table is equipped with adjusting screws. However, there are models of 3D printers on the market with auto-calibration of the print bed, which greatly simplifies the operation of the printer.

The principle of auto-calibration of the 3D printer table

Before printing, the 3D printer determines the position of the print bed relative to the extruder and, if necessary, adjusts the position of the nozzle during printing.

Typically, an auto-leveling 3D printer has a proximity sensor or contact end sensor at the printhead nozzle level that "probes" certain points on the platform when the auto-calibration process is initiated. Sometimes, equipped with a feedback encoder, the extruder itself serves as such a sensor, and the nozzle is its probe.

One of the advantages of auto calibration is that it allows you to print a quality product, even if there are visually imperceptible irregularities on the table. Such a situation may occur during long-term operation of the device at high heating temperatures of the printing table.

Since the 3D printer automatically adjusts the position of the nozzle relative to the plane, the nozzle is always at the optimal distance from the printed model during the operation of the device. This, in particular, improves the adhesion of layers and print quality.

When using non-professional FDM 3D printers, especially from the DIY category (self-assembled, supplied as a kit), there are extensive upgrade options, including the ability to install the sensor required for auto-calibration.

Auto-calibration using the example of Simplify3D


Consider setting up auto-calibration using one of the most popular professional 3D printing software, Simplify3D, as an example.

If the 3D printer has an automatic build plate alignment feature, then the Simplify3D profile for the machine must be set to auto-calibrate at the start of each print.

If you are using the printer for the first time, you can download the default Simplify3D profile for a specific device by selecting Help > Setup Assistant in the program. After loading the profile, click "Change process settings", go to the "Scripts" tab and select the startup script. This set of commands defines the actions that the 3D printer will perform at the start of each print.


To auto-calibrate the 3D printer, edit the G-code of the script. To do this: at the beginning of the file, you need to add the G29 command, which tells the printer that you need to perform the table auto-calibration process. In this case, the 3D printer must perform a standard homing operation before it starts the alignment process, i.e. the G29 command must be placed after the G28 command (homing command) in the script.

Startup scenarios may vary depending on the model. There are several different types of G28 commands, such as the regular "G28" (all-axis coordinate origin), "G28 X0 Y0" (X and Y origin only), or "G28 Z0" (Z-axis origin only). For the script to work correctly, the G29 command must come after the most recent G28 command.


After making these changes, you must save the new printer settings. To check if the changes were successful, it is enough to start a new print on the 3D printer and make sure that the table auto-calibration process is performed at the beginning of the print.

Learn more