3D print nintendo switch grip


STL file Nintendo Switch - Ergonomic Grip (Original + OLED)・3D print design to download・Cults

Add to ?

Creation quality: 4.8/5 (7 votevotes)

Evaluation of members on the printability, utility, level of detail, etc.

  • 👁 18.3k views
  • ♥ 58 likes
  • 242 downloads
  • 11 comments
  • 1 make

3D model description

Update 28/07/22:
I've added a modified version that fits the Switch OLED. Since the OLED doesn't have the screw holes my original design relies on, the updated version is instead held in place by the screw hole on the joycon itself. A drawback with this solution is that it is no longer as easy to remove the joycons once slid into place and you now have to remove the grip before you can remove the joycon. Be aware that this does put more stress on the grip itself when removing it. With this in mind I'd caution against removing and attaching the grips too frequently and it may be a good idea to print them in a less brittle material like PETG.

Update 17/07/19:
I’ve been meaning to print and paint myself a new pair of grips for some time now, and based on my own impressions using the originals, plus some new insights, I also wanted to improve on a couple of things with the design itself.

The most notable change is the expanded brace which now covers more of the back of the console, further improving on the less than secure connection between the Switch and the Joycons. Consequently, the kickstand can no longer be unfolded to access the sd-card without first removing the grip. Personally, I don’t see this as an issue but be aware nonetheless.

Also noteworthy, compared to the original the grips now print at an angle which might seem a bit odd but I’ve found that this makes a big difference printing the otherwise horizontal overhang, especially if you’re using Curas ‘Support Interface’ feature which I highly recommend (you can read about it here: https://ultimaker.com/en/resources/52663-support ).

The only other changes made are some slight tweaks and refinements contributing to a better fit and a somewhat more refined model directly of the build plate.

One last thing that I’ve added besides the models for the grips is a test piece for tuning the support settings, saving both time and material.

Update 22/06/18:
Upon request, I've included a slightly larger version of the grip.

Original text:
My latest and greatest creation. Not much to say, I wanted a grip for my switch and since most of the ones available are somewhat lacklustre I decided to design my own. Credit where credit is due, I was influenced by Toshi_TNEs design
https://cults3d.com/en/3d-model/game/nintendo-switch-portable-mode-grips although I’d say that mine is a fair bit more comprehensive. Unlike theirs, my design snaps onto the main body of the switch before the joycons are attached, giving a nice firm fit. The grips themselves are also quite substantial, although they are not as large as something like an xbox controller.

The grip come in two versions; v1.1 is the one in the pictures and has an extra bit sticking out to better support the switch if held one-handed. both work just fine but personally I wanted some extra support.

To those worried about scuffing their joycons, it should go without saying that this design is intended to be sanded and preferably painted. If you’re not painting, then consider applying some thin masking tape along the side and bottom where the joycon will be rubbing against when it is slid in place. If you are painting it then keep in mind that the thicker the pain, the less wiggle room the joycons will have. I went a bit overboard on the ones in the picture, hence the scuff marks.


3D printing settings

Printer: Ultimaker Original+ & Ultimaker 2+ & Ender 5

Material advise:

The OLED version may benefit from being printed in a less brittle material like PETG as it requires a bit more flex than the ones for the original when removing them from the console

General settings:

Layer thickness: 0.1mm
Wall-thickness: 1.6mm (4 lines with a .4mm nozzle)
Infill: 5% - 10%
Build Plate Adhesion: Brim (Line count 15)
Top/Bottom thickness: 8 - 12 layers
Top/Bottom Pattern: Concentric

Supports: This is likely going to depend on the printer, but bellow are my settings for the UM2+ where other than default
Support Density: 10%
Enable Support Interface: True
Support Z Distance: 0.1mm or 0. 2mm (This is the most critical setting when printing with support interface and I strongly recommend experimenting with the included test model to get this right)

3D printer file information

  • 3D design format: STL Folder details Close
    • Support_Test.stl
    • Switch_Grip_v2_L.stl
    • Switch_Grip_v2_OLED_L.stl
    • Switch_Grip_v2_OLED_R.stl
    • Switch_Grip_v2_R.stl

    Learn more about the formats

  • Last update: 2022-07-28 at 11:36
  • Publication date: 2018-06-17 at 13:40

Copyright

©

Tags

Creator

Designs 8

Downloads 2. 8k

Sales €1,805.30

Liked designs 3 Followers 45

Contact

I have a serious beef with crappy ergonomics.

Donate

Collection associated with this 3D model


Ergonomic Grip For Ps-Vita V2 (PCH-1000)

€2.84

Ergonomic Grip for the Original 3DS XL

€3.36

Ergonomic Grip For 3DS v2 (original 3DS + DS Lite)

Free

Nintendo Switch Grip (Docked)

Free

Ergonomic Grip For Ps-Vita (PCH-1000)

Free

Ergonomic Grip For 3DS (original 3ds)

Free

Comfort grips for the Xperia Z2 tablet

Free

Best 3D printer files of the Game category

Visitor's Tanker

€4. 02

zZcube's Music Box (Tune Box)

Free

Funko pop Harry Potter

€3.43

Marble Run Compatible Wide Format 8 Marble Finish

Free

Playmobil - Stair treads - stair treads

Free

Ocarina "Waiwen" 4 holes

€2.95

Game Tilt for Sylvanian Playmobil _ Seesaw

Free

Best sellers of the category Game

Alteyr Champion

€5.09

Octopus 2.0

€4.06

The VoTank : Heck'o'tons Mobile Fortress

€5.76

Nice Flexi Hedgehog

€1.05

Catafrac Heavy Armoured Warriors - Limbs Pack

€1.85

Voidwalker Exosuits Truescale

€14. 83

Hrafnagud and ROXS Units

€10.18

SPACE DWARF SQUAD

€6.11

Chopper Motorcycle Print-In-Place

€1

Gen 6 Pistol arms (Ver.1 Fix)

€5.09

Squataur

€5.60

Lazy Cat

€4.06

Megaton Ground Castle

€8.13

Articulated Dragon

€4.06

Dancing skeleton

€3.56

Nice Flexi Dragon

€1.77



Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via PayPal.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

▷ nintendo switch grip 3d models 【 STLFinder 】

Nintendo Switch Grip (Docked)

thingiverse

Obviously there’s no lack of 3D printable docked grips for the Switch, and whilst I could go on in length about my motivations and goals, suffice to say that I can be quite picky when it comes to ergonomics and that I designed this as a complement to. ..

Nintendo Switch grip for controllers

thingiverse

Nintendo Switch grip. Designed in one half so that you can print multiple in different colors and stick them together with super glue. ...

Nintendo Switch grip for controllers

prusaprinters

Nintendo Switch grip. Designed in one half so that you can print multiple in different colors and stick them together with super glue.

Nintendo Switch Grip with Logo

thingiverse

This is a Quick Design of a Nintendo Switch Grip with the Luigis Mansion 3 Logo put on the Back with a Extended Backpanel. ...I also Increased the Width of the Parts holding the Switch in the Frame.

Nintendo Switch Grip, two pieces

thingiverse

I'm posting my old take on the Nintendo Switch Grip, since i posted my remix for DLP and forgot i hadn't posted the original. Check the DLP one here: https://www.thingiverse.com/thing:4380932 This one is optimised to print without supports,...

Nintendo Switch Grip, two pieces

myminifactory

I'm posting my old take on the Nintendo Switch Grip, since i posted my remix for DLP and forgot i hadn't posted the original. Check the DLP one here: https://www. myminifactory.com/object/3d-print-122641 This one is optimised to print without...

NINTENDO SWITCH GRIP JOISTICK

thingiverse

El Comfort Grip, son un par de piezas impresas en 3d las cuales permiten al usuario agarrar con mayor facilidad la Nintendo Switch mejorando y haciendo de la experiencia de juego más cómoda y amena El Grip permite jugar a la Nintendo Switch de una...

Nintendo Switch Grip

thingiverse

Check out my remix of this: http://www.thingiverse.com/thing:2238228 A grip for the Nintendo Switch when used in portable mode. Everything Nintendo makes seems to be for small hands, so this is too make it a bit more comfortable for everyone, whilst. ..

Nintendo switch grip

thingiverse

I wanted a grip for my Switch that wouldn't cover too much of the Joy-Cons, because of the skin I have on them. Therefore I designed them to just hold the Joy-Cons from below. I've made the "bump" that goes inside the screw hole longer and a bit...

Nintendo Switch Grip (Docked)

cults3d

Obviously there’s no lack of 3D printable docked grips for the Switch, and whilst I could go on in length about my motivations and goals, suffice to say that I can be quite picky when it comes to ergonomics and that I designed this as a complement to...

Modular Nintendo Switch Grip

prusaprinters

The grips also slide on from underneath to keep them from letting go of the console.  My first versions are just simple rounded ones, but I'm hoping to have time to design a few others.There's only a .25mm clearance between the grip and the rail...

Nintendo Switch Grip Normal (V1V/2) & OLED

thingiverse

Transfered to https://www.prusaprinters.org/prints/99097-nintendo-switch-grip-normal-v1v2-oled

XL Nintendo Switch Grip with Game Holder

thingiverse

A Nintendo Switch grip and game cartridge holder designed to be more comfortable while holding the Switch. This is an XL variation of jgr526's excellent grip (link below). It differs in the following ways: * Really large grip handles that are wider. ..

Nintendo Switch Grip, Travel Remix

thingiverse

This is a remix of version 3 of jgr526's excellent comfort grip for the switch https://www.thingiverse.com/thing:2234489 (not the new switch lite... sorry). It really is as close to comfortable as you can make the switch in its portable...

Nintendo Switch Grip, Travel Remix

prusaprinters

This is a remix of version 3 of jgr526's excellent comfort grip for the switch https://www.thingiverse.com/thing:2234489 (not the new switch lite... sorry). It really is as close to comfortable as you can make the switch in its portable. ..

Nintendo Switch Grip Modular Remix

thingiverse

I am going to make the grip parts out of flexible filament and secure it to the mount with screws. The screws are just random ones that fit a 3mm hole snug. I also added a bottom to the back slot to make it easier to stick together. ...The middle back...

Nintendo Switch Ergonomic Grip

cults3d

This Nintendo Switch Grip Case is made for every gamer. Whether your hands are sore, tired, big, or small, this grip case makes sure that you will have a great time playing your Nintendo Switch. These grips improve the ergonomics of the Nintendo. ..

Nintendo Switch Lite Grip

myminifactory

A grip designed to mimic the ergonomics of some commercially available nintendo switch lite grips. 3 part assembly, assembled using four M4*16 bolts. ...Fit is designed to be 1mm loose, so using non-permanent adhesive (like blu-tack) is recommended...

Nintendo Switch Lite Grip

thingiverse

Remix from: https://www.myminifactory.com/object/3d-print-nintendo-switch-lite-grip-104734 The message he put: A grip designed to mimic the ergonomics of some commercially available nintendo switch lite grips. 3 part assembly - (4 part assembly...

Nintendo Switch Steam grip

thingiverse

This is a work-in-progress for a Nintendo Switch Joycon grip. I believe the original grip is too small for my hands, so I combined the Joycon docks into something that has notoriously large hand grips: the Steam controller. I want to stress that this...

Nintendo Switch Joycon Grip

thingiverse

This is my designed Grip for the Nintendo Switch. The Grips themself are based on a Switch Pro Controller but are optimized for Joycons. In order to provide an ergonomic experiance I have tillted the Joycons in 2 directions (see Pictures). The...

Nintendo Switch Grip Improved

thingiverse

Optimized for small bed printing. Includes screw holes for increased rigidity. Larger holding tabs to prevent breaking. Three-piece design for smaller build area. ...Honeycomb design increases fracture resistance.

Nintendo Switch Grip

thingiverse

Have Fun! ... Update: by request V3 without shoulders

Nintendo Switch Grip v2

thingiverse

This thing was made with Tinkercad. ...Edit it online https://www.tinkercad.com/things/1n7NcOTUwcz

Ergonomic Nintendo Switch Grip with Rails

thingiverse

This Switch Grip reuses the rails on the included grip in the box with the Nintendo Switch. Unscrew the rail from the Original Switch Grip, then reattach onto the new 3D printed model(Side doesn't Matter). ... Slot your Joycons in and Enjoy!

Nintendo switch joycon grip holder

thingiverse

For nintendo switch joycon grip (without joycons in). ... it just slides in there to keep it safe.

Nintendo Switch Grip, for DLP printing

thingiverse

I've remixed my old take on the Switch grip with some voronoi pattern and reduced the internal bits to give it a somewhat organic feel. You can find the original design here, more suited to FDM but works great on a DLP:. ..

Nintendo Switch Grip, for DLP printing

myminifactory

I've remixed my old take on the Switch grip with some voronoi pattern and reduced the internal bits to give it a somewhat organic feel. You can find the original design here, more suited to FDM but works great on a...

Nintendo Switch Grip v2A fixed and slanted

thingiverse

I printed out several of jgr526's great NS Grip designs. I found v1 and v3 to be too hard to reach shoulder buttons. v2B is too slim and less grippy. v2A is perfect. There is however one problem---the model is mostly split in two halves; see the. ..

Nintendo Switch: Thumb Grip Minecraft

thingiverse

Thumb grip for a Nintendo switch, the grip is makes the thumb stick 6mm higher, which is nice for people with large hands or people who loves Minecraft

STL File Nintendo Switch - Ergo Grip (Original + OLED)・3D Download and Print Model・Cults

Update 07/28/22:

I added a modified version that fits Switch OLED. Because the OLED doesn't have the screw holes my original design relies on, the upgraded version is held in place with a screw hole on the joystick itself. The disadvantage of this solution is that now the joystick is not so easy to remove after being put in place, now the handle must be removed before removing the joystick. Be aware that this puts more stress on the gripper itself when it is removed. With that in mind, I would caution against taking the handles off and on too often, and it might be a good idea to print them in a less brittle material like PETG.

Update 17/07/19: .

I've been thinking about printing and painting myself a new pair of grips for a long time, and based on my experience with the originals, as well as some new ideas, I also wanted to improve a couple of things about the design itself.

The most notable change is the extended brace that now spans more of the back of the console, improving the less-than-reliable connection between the Switch and the Joy-Cons. Accordingly, the stand can no longer be unfolded to access the SD card without first removing the handle. Personally, I don't see this as a problem, but be careful nonetheless.

It's also worth noting that, compared to the original, the grips now print at an angle, which may seem a bit odd, but I've found this improves the printing of the horizontal overhang a lot, especially if you're using Curas' 'Support Interface' feature, which I really like. I recommend (you can read about it here: https://ultimaker.com/en/resources/52663-support ).

The only changes that have been made are some minor tweaks and refinements to help with a better fit and some more accurate model of the building board itself.

The last thing I added besides the models for the handles is a test piece to set up support parameters, which saved time and material.

Update 06/22/18: .

Upon request, I have included a slightly larger version of the handle.

Original text:

My last and greatest creation. Not much to say, I wanted a grip for my switch, and since most of the ones available are somewhat flimsy, I decided to build my own. I have to give credit, I was influenced by the design of Toshi_TNEs.

https://cults3d.com/en/3d-model/igra/nintendo-switch-portable-mode-grips although I would say my design is more complete. Unlike their design, my design snaps onto the main body of the switch prior to attaching the joycons, providing a nice snug fit. The grips themselves are also pretty substantial, although they aren't as big as the xbox controller's.

Gripper is available in two versions; version 1.1 is the one in the photos and has an extra piece sticking out to better support the switch when held with one hand. Both options work great, but I personally wanted more support.

For those who are worried about scuff marks on joycons, this design is meant to be sanded and preferably painted. If you're not going to be painting, apply thin masking tape along the sides and bottom that the joycon will rub against when it's in place. If you're painting, keep in mind that the thicker the tape, the less wiggle room the joycon will have. In the photo, I overdid it a little, hence the scuffs.

Printer: Ultimaker Original+ & Ultimaker 2+ & Ender 5

Suggested material:

The OLED version may benefit from printing in a less brittle material such as PETG as it requires a little more flexibility when removed from the console than the original version.

General settings:

Layer thickness: 0.1 mm

Wall thickness: 1.6 mm (4 lines with .4 mm nozzle)

Infill: 5% - 10% (number of lines 15)

Top/bottom layer thickness: 8 - 12 layers

Top/Bottom Pattern: Concentric

Support: This will probably depend on the printer, but below are my settings for UM2+ other than the default settings

Support Density: 10%

Enable Support Interface: True

Support Z Distance: 0.1mm or 0.2mm (This is the most important setting when printing with the support interface and I highly recommend experimenting with the included test pattern to get the right result.)

50 3D Printing Ideas

It looks like we'll soon be drowning in useless stuff made for 3D printing projects. But you can do something that will really be useful! If you're running out of ideas, here's a list of 50 3D printable items you're unlikely to throw away.

Bag clip with screw cap

Now the bag clip will have a new feature - a hole with a lid for quick access, as in the photo. This clip is easy to print and convenient to use. Strange that no one thought of this before.

Author: Minkix

Download: Thingiverse

Modular Furniture Connector

This connector allows you to quickly assemble modular furniture. The default model is designed for 17×17 mm wood, but the size and material can be changed to suit your needs using a parametric file for customization.

Creator: LeFabShop

Where to download: Cults

Sealant cap

No more throwing open sealant tubes away. The screw cap for the nozzle presses the o-ring tightly against the body of the tube and closes the access of air to the solvents inside.

Author: The-Mechanic

Where to download: Thingiverse

Laptop niche

Now the laptop will always be at hand, but hidden from prying eyes in a special niche that is attached to the bottom of any coffee table.

Author: Too Snide

Download: Thingiverse

Phone holder - Candice

Elegant and simple, perhaps the easiest thing you can print on a 3D printer.

Author: Clem.C2

Where to download: Cults

Polypanels

The idea for Polypanels came from Devin Montes. A polypanel is a series of three-dimensional building blocks. The individual elements of a Polypanel look simple, but if you print a lot of them and different types, you can create all sorts of complex designs. Something like LEGO where you can design each brick.

Author: MakeAnything

Where to download: MyMiniFactory

Coat Hook

This coat hook is designed as an E3D attachment and can be printed multiple times to fit all your clothes.

Author: Filar3D

Where to download: Cults

Plant Pot

This anatomical brain flower pot is easier to print than it looks, creator DrFemPop says. For assembly, it is only necessary to glue the parts after printing. It turns out an original house for plants.

Author: DrFemPop

Where to download: Cults

Door Holder

This is a simple solution for holding a door. Double-sided adhesive tape is sufficient for surface mounting.

Author: Akiraraiser

Where to download: Thingiverse

Piggy bank

A simple piggy bank for beginners, no complicated settings.

Author: lecaramel

Where to download: Thingiverse

Cable Ties

This tie is perhaps the simplest and most ingenious of all devices. Clips are printed as a whole sheet at once, and then the required amount can be cut off from it.

Author: Sunshine

Where to download: Cults

Roller ruler

An indispensable device if you need to measure the length of something non-linear: a piece of rope, a curved line, a perimeter with bends, etc. The ruler is called Geneva and has step 5 mm.

Author: MechEngineerMike

Where to download: Thingiverse

Tongs

This small solid piece of plastic can replace your pliers/pliers. These forceps take the force to the handles and redistribute it at the end of the grip. It's definitely pliers. Just smarter.

Author: BYU CMR

Where to download: Thingiverse

Cylindrical textured box

Beautiful tube from Syboulette decorated with hexagons. Well suited as a kitchen utensil for storing oatmeal, rice and other crumbly substances.

Author: Syboulette

Where to download: Cults

Door Stop

This stop is modeled after the Guyer Anderson cat statue in the British Museum. The design is hollow, which allows you to fill the limiter with something for additional weight.

Author: Duaneindeed

Download: Cults

Plague Doctor Mask

Not exactly the most useful item on the list since bubonic plague is a thing of the past. But a mask can come in handy, for example, when you need to clean up after your pet. And you can also go to the carnival in it.

Author: Odrivious

Download: Cults

Universal Spool Holder

This adjustable spool holder uses a spring and an adjustable rewind clutch. It's the perfect place to store those pesky wires.

Who made it: Vincent Goenhuis

Where to download: Thingiverse

Sturdy waterproof box

This tight-fitting box will keep things from getting wet. Print it in PLA or PETG, add a flexible TPU seal and M3 screws for the spring hinge, and you're done.

Author: ZX82

Where to download: Cults

Dice

This dice is suitable for flat 3D printing and has a face size of 16mm.

Author: Devin Montes (MakeAnything)

Where to download: MyMiniFactory

Collapsible Coat Rack

Really cool coat rack. That's all there is to say about her.

Author: Komaru

Where to download: Thingiverse

Business Card Holder

Perfect for showing off your new business cards to your Wall Street friends. What could be more delightful than this Zippo card holder with flip-top lid.

Author: PentlandDesigns

Where to download: Cults

Pen and Pencil Holder

Iceberg or melting beehive? Be that as it may, this is a handy pen and pencil holder that is cheaper to print than to buy.

Author: BeeVeryCreative

Where to download: Cults

Groovi Monster Audio Amplifier

This is a passive smartphone audio amplifier that looks stylish and does the job well. It's called Groovi Monster for a reason.

Author: 3DShook

Where to download: Cults

Cup holder

Can be used not only as a cup holder, but also as a coaster for hot dishes. The dimensions of the template are easily adjusted to suit any size cookware.

Author: jmdbcool

Where to download: Thingiverse

Clamp

Designed for fixing various materials, including the ends of the wire in the coil. Also great as a clothespin replacement.

Author: Med

Where to download: Cults

Pencil box

Suitable for storing all your desk trivia and trinkets (memory cards, rubber bands, pencils, paper clips, etc.).

Author: Monkey3D

Where to download: Cults

Headphone holder

This is a duck. Yes, you can hang headphones on it.

Author: Toshi_TNE

Download: Thingiverse

Polyhedral Succulent Pot

Unusual geometric pots for your growing succulent collection. These small pots can be configured to be connected together.

Author: PrintFutura

Download: Cults

Survival whistle

This is a survival whistle with original design. It is durable, easy to make and very loud (118 dB is more than enough to be heard in an emergency).

Author: Joe Zisa

Where to download: Thingiverse

Measuring cube

A simple and original measuring cube for the kitchen. On each side there are recesses for measuring the volume of ingredients (in cups - according to the American system, and in metric units for everyone else). It is best to print with PETG material, it is the safest for products.

Author: iomaa

Download: Thingiverse

Hinge

This is a parametric hinge that can be sized to suit your needs.

Written by Rohin Gosling

Where to download: Thingiverse

Car Eyeglass Holder

Attaches to your car's sun visor. Glasses will always be at hand.

Author: Trevor Long

Download: Thingiverse

Opener

The simplest things are usually the most useful. Convenient and easy to print opener. Covers the sharp edges of the cork as much as possible, protecting you from injury.

Author: Jeremy Peterson

Download: Thingiverse

Superhero Keychains

Sometimes you need to remind yourself of your hidden superpowers. Stylish and cool keyrings are well suited as a small gift.

Author: Formbyte

Where to download: Cults

Headphone stand

Will be useful for music lovers and gamers who use headphones a lot and often. After all, now they will no longer roll around anywhere.

Author: MakerBot

Where to download: Thingiverse

Bag Clip

The model consists of two printed parts. Allows you to keep packages closed and keep food fresh longer.

Author: Walter Hsiao

Download: Thingiverse

Plastic wrench

Handy wrench, but don't choose soft plastic to make it.

Author: Daniel Noree

Where to download: Cults

Sliding Decal

No more worrying about whether cups are clean or dirty right now in the dishwasher! With the help of a special mechanism, the slider easily changes the inscription on the plate.

Who made it: MiddleFingerBoss

Download: Thingiverse

Collapsible basket

Cool picnic item. A folding square basket with five sections is printed from several parts and then glued together. For product safety, it is recommended to use PETG plastic.

Author: PatternToPrint

Where to download: Cults

Self-watering plant pot

Houseplants are dying from your forgetfulness? This will not happen again! This pot will water them by itself, and your conscience will be clear.

Author: Parallel Goods

Where to download: Cults

Maze Gift Box

Cash is not the most original gift. But if you present them in such a gift box, your friend will surely like it. The lucky recipient will have to work hard to get to the prize, because there is only one right way.

Author: Robert

Where to download: Thingiverse

Wired headphone holder

The headphones will now be protected from tangles and breakage.

Author: Robert

Where to download: Thingiverse

Tube Squeezer

Will help squeeze out the contents of the tube to the last drop. Wide enough to fit most tubes on the market. Printed in three separate parts.

Author: Justin Otten

Where to download: Thingiverse

Webcam slider shutter

The best thing for the paranoid and just for those who are uncomfortable being under the sight of a webcam. Instead of sticking tape or sticky tape over the lens, attach a slider shutter to the body and open it when you need a video call.

Author: Horizon Lab

Where to download: Cults

Hexagonal Prefabricated Drawers

Useful to free the table from the noodles of cables, wires and just every little thing. The design can be easily expanded if necessary.

Author: Dan O'Connell

Where to download: Cults

Wall Mounted Phone Shelf

Attach the shelf to a power outlet and place your phone on it while charging. The model also has a corner slot that holds your smartphone or tablet upright for watching videos.

Author: Tosh Sayama

Where to download: Cults

Card Shuffle Machine

Awesome item for poker lovers. This device will help to shuffle the cards and deal them during the game.

Author: LarsRb

Where to download: MyMiniFactory

Box with a secret lock

Box for storing things in a place inaccessible to prying eyes with a secret multi-stage opening mechanism.

Author: 3DPrintingWorld

Where to download: Thingiverse

Digital Sundial

Yes, your eyes don't deceive you.


Learn more