3D printed ball joint


Learn How to Add Ball Joints to Your 3D Printed Parts | Pinshape BlogPinshape 3D Printing Blog

Ball and socket joints are a powerful way of adding mobility and functionality to your 3D designs. Creating properly fitting joints can be challenging due to the precise tolerances required. In this post, you’ll learn how to create several types of ball joints and discover recommendations for securing a proper fit.

You’ll learn about two ball joint mechanisms, those that print-in-place and those that are pressed together after printing. We’ll go through recommendations for materials that maximize the effectiveness of your joint and demonstrate a few applications.

Insertional Ball Joint

This type of ball joint prints in two separate parts and snaps together after printing. Tolerances for this type of joint can be especially challenging as too tight of a fit won’t allow the ball to enter the socket and too loose of a fit will allow the ball to fall out easily.

We’ll be using the graphic below which was designed in Onshape to demonstrate some of the main parameters to keep in mind when creating this type of ball joint.

  1. For a normal joint, the offset between the ball and socket should be about 0.3mm. Ex: In the image above, the ball has a diameter of 10mm and the socket has a diameter of 10.3mm
  2. For a tight fit, the opening of the socket should be 0.2mm smaller than the diameter of the ball. Ex: The socket opening is 9.8mm and the diameter of the ball is 10mm.

When creating a ball and socket joint, iteration is key and the above values may change depending on your application. Ball joints much larger or much smaller than the example above will require changes to the dimensions, but these are good guidelines for starting out.

Print-in-Place Ball Joint

This type of joint is a favorite among talented designers like Sonia Verdu and you can find many examples of a print-in-place ball joint on her page. As the name suggests, this type of joint prints with the ball and socket as one piece and if done correctly, is fully functional after printing.

Tolerances for this type of joint can be more challenging because if the walls of the ball and socket are too close, they’ll fuse together rendering your joint useless.

  1. The part must be oriented such that the highest point of the socket is above the highest point of the ball. Unsupported minima will cause the socket to fail. This technique makes use of overhangs so adequate layer cooling is required on FDM machines.
  2. For SLA printers, the offset between the ball and socket should be 1.25mm. For FDM machines, the offset between the ball and socket should be 0.8mm. Ex: In the image above, the diameter of the ball is 10mm and the socket is 11.25mm for SLA printing.
  3. The diameter of the socket opening must be smaller than the diameter of the ball. Ex: The socket opening is 9mm across and the diameter of the ball is 10mm.

This technique can be challenging to get right. If you’re noticing that the walls are fusing together, continue adjusting tolerances until you have a proper fit. This technique is optimal for creating loose-fitting joints, but doesn’t work well for designs where a tight fit is required.

Material Options

Ball and socket joints are constantly in motion and sliding against each other so a low-friction material is required. For professional quality joints, PRO Series High Precision 3D Printing Resin from MatterHackers is the best option. This material mimics polypropylene and has low-friction properties as well as moderate elongation which makes it especially well suited for ball jointed designs.

Few FDM materials exist that compete with the low-frictional properties of High Precision Resin, but many materials will still work for ball-jointed designs. The lowest friction materials for FDM are Polycarbonate Filament and Tribo Filament by Igus, but these can be costly and challenging to use. For non-professional applications, more common materials like PLA and ABS are likely to work.

With these design and material guidelines in mind, you’re ready to start implementing ball joints into your own designs. For inspiration check out Sonia Verdu’s and BQ’s design pages where they host a number of impressive ball-jointed designs.

Using 3D Printing in the Ball Joint Doll Community

by Vera

Toys

A strong indicator that the power 3D printing has to fuel growth in the maker community is finding it being put to use far and wide in niche groups of fellow artisans. This is the case with Aura and David Welsh – denizens of central California. They have discovered and cultivated the use of 3D printing, to enhance their craft, accept more commission work, and create new and exciting parts and accessories for their Ball Joint Dolls (BJD’s).

An amazing world of makers just outside the mainstream, the Ball Joint Doll community creates a huge variety of dolls that have ball-joints; simple ball and joint snap joint at the elbows, knees, neck and anywhere else a doll would need articulation to move. The types of BJDs can run the gamut; animalistic, gothic, super-cute, anime, fantasy, punk, couture fashion and everything in between – the possibilities are endless.

Aura and David started their 3D printing journey back in 2015, shortly after their daughter was born. With an already impressive print farm collection accrued in their short time, they use FDM machines like the Prusa i3, Monoprice Delta, Monoprice Select Mini, and their most recent acquisition, a Peopoly Moai SLA resin 3D printer. Aura personally started down the path into the BJD world when a friend asked for help painting a doll – as Aura had previously worked on painting sculptures. She ended up ordering her first doll before she finished painting the one for her friend!

While they do occasionally use their 3D printers for things around the house like baby gate parts, drain covers, toothbrush stands and more, they primarily use them for their personal and commissioned work with Ball Joint Dolls. They use a small selection of materials for their BJD creations; PLA, sometimes carbon-fiber PETG, normal PETG and very rarely ABS. They have also used woodfill for a few select projects.

Finishing their 3D prints depends on what the end application for the piece will be. PLA and PETG prints, if they absolutely need to be finished, will get a few rounds of sanding with primer afterward, or they are left as is. With SLA prints from their Peopoly Moai, the parts get a soak in isopropyl alcohol for 1-3 hours to loosen the supports enough that they peel away and leave little to no marks or pits. Afterward, the resin prints get a coat of primer and sanding or very, very light wet-sanding with 1500 or 2000 grit, then a finishing coat of primer.

Aura uses primarily ZBrush to design and model her parts but will use Fusion360 and 3DBuilder when the need arises. David uses Fusion360 almost exclusively.

With the last three years of experience designing and creating new and exciting parts and accessories for BJDs, Aura and David have become well known in their local BJD community for their knowledge and expertise. Recently, they were asked to give two talks on BJDs and the application of 3D printing in their workflow at the Resin Rose BJD Expo in Clackamas, Oregon.

Aura’s award-winning Abaddon model

At the Resin Rose Expo, Aura and David were able to showcase how 3D printing has really elevated their involvement in the BJD community. Without the possibility of 3D printing, both David and Aura were becoming a little stuck creatively – but being able to develop shoes, doll-scaled weapons and more became extremely fun and rewarding – both personally and professionally. They have been able to expand the product lines they regularly sell, as well as take on commissions they normally would not have been able to in the past. They report that the BJD community as a whole is starting to utilize 3D printing in whole or in part to create their dolls, doll parts, and accessories as well.

Israfel, another of Aura’s award-winning models

Aura has also been able to capture some awards for her BJD work with her doll Abaddon and Israfel – she won first place for the Faceup competitions they were entered in! Aura describes her creations as having a goth/supernatural vibe with punk (cyber and normal!) and fantasy a close second.

With all of the new possibilities available to them, as well as their community, they also see much more room for exposure and understanding of 3D printing.

Like many other makers in the 3D printing community, Aura is calling for improvements in the education of students for, “..earlier access and exposure (to 3D printing). Schools having access to printers, or even more access to programs like CAD or Zbrush would do wonders to help expose newer generations to these tools getting them excited about them sooner. I’d like to see it become even more accessible and widely used, especially by women and girls.”

In that same regard, Aura’s daughter is already helping with her 3D printed BJD creations. She recently named a new Halloween project doll called ‘Pumpkee’; he will have a removable lid, ball-socket feet, and ten different faces! David is building an RGB LED rig using Adafruit Pixel nanos so Pumpkee can light up and be festive! He’ll be their first full in-house printed doll. They will also be debuting a full human doll within the next year!

We look forward to seeing more and more 3D printing creations from Aura and David, as well as the BJD community at large!

If you would like to learn more about Aura and David and their work, you can visit the links below:

Website: https://www.syntheticephemera.com/

Instagram Page: https://www.instagram.com/syntheticephemera/

Tags: 3d printing, accessory, BJD doll, toy

Top 20 3D printed toys

Why 3D print toys? What toys can be 3D printed? 1. Mini monster truck 2. Surprise eggs 3. Gliders with elastic band 4. Folding sword 5. Micro catapult 6. Spinning top 7. Moving animals 8. Spirograph 9. Transformers 10. Toy tool set 11. Castle 12. Lego bricks 13 14. Edible toys 15. Anti-stress keychain 16. Chunky Trucks set 17. Sword rattles 18. Vikings Squigglepeeps 19. Math Spinner 20. Jumping Turtles Results

Today, 3D printing is developing and spreading very rapidly, gaining more and more popularity. And no wonder, because 3D printing is an invaluable tool for prototyping designs, creating mockups, fabricating parts, and more. At the same time, it is no longer difficult to buy a 3D printer at an affordable price even for home use. However, a 3D printer is not only a tool, it is also a kind of toy. A toy capable of creating other toys! Using a 3D printer to make toys gives you control over the material, color, size and other components, so the models you create with 3D printing will be unique!

But what if you don't have your own 3D printer and you need to print a toy or some part of it? It doesn't matter, in this case our 3D printing studio will help you! You only need to place an order by uploading the file of the desired finished model, after which our specialists will contact you to calculate the cost and resolve other possible issues.

Why 3D printed toys?

This is probably the first question that comes to mind, and it is not surprising, because often 3D printing can cost you more than the cost of such a toy in the store. But there are also a number of advantages of 3D printing, as well as cases when it would be more profitable and appropriate to turn to creating models on a 3D printer.

  • As already mentioned, a toy printed on a 3D printer can be absolutely unique due to the ability to give it exactly the shapes, sizes and colors that you and your child want.
  • Some toys can be difficult to find in the store, and their cost may exceed the cost of their printed copy.
  • Sometimes you only need to replace one or a few broken or missing parts of a toy, such as a building toy. In this case, it will be much more profitable and more expedient to use a 3d printer than to buy a whole set for a high price.
  • An important factor is, of course, the impressions of the 3d printing process itself, which will captivate both a child and an adult. And the positive emotions of your child from the toy you created will be the best reward!
  • And for those who are just getting acquainted with their printer and 3d printing in general, the process of creating toys will be an excellent, exciting simulator to improve their skills and gain experience.

Which toys can be 3D printed?

In the context of constant development and increase in the possibilities of 3D printing technology, you can create almost any toy on a 3D printer, but the result largely depends on the capabilities of your device, your abilities, as well as the time, resources and effort that you are willing to devote to this process. Therefore, more or less simple projects are most often created on a 3D printer. But the relative ease of manufacture does not mean boring finished products! Below we will give you a list of 20 interesting 3D printed toys that are not particularly difficult to create. Among these crafts you will find toys for children of all ages, including the smallest: mechanical products, motion figures, building blocks and even rattles! For each toy from the list, we leave a link to the finished model so that you can try them yourself. So let's get to know them better!

1. Mini monster truck

Two monster trucks. Source: Thingiverse

Not everyone can afford a monster truck, but if you have a 3D printer, you can print yourself a mini copy of it... which is almost as cool. Thanks to the all-printed suspension and removable discs that attach easily and without the aid of glue to the body, this truck is perfect straight from the printed surface.

You can even choose from a variety of body styles and wheels. And for a two-tone tire, stop printing the wheel at 19.8 mm and replace the filament.

Model files for download can be found here.

2. Surprise eggs

Surprise! Source: Twitter

Bigger is not always better. And often the most interesting thing is just a small size, and these 3D printed eggs with a surprise are an example of this.

These tiny cars with moving wheels and other accessories are amazing! Plus, you have plenty to choose from, as you can print surprise eggs with just about anything inside, be it a fire truck or even a fighter plane!

No support required for these models. We advise you to use at least 40% infill to make sure that small elements are both beautiful and durable. Given the number of such tiny parts these machines have, be prepared that printing them can be a real challenge for you, but with good calibration and fine tuning of your machine, everything will work out in the best way!

3. Elastic Gliders

Get ready to take off! Source: Thingiverse

With 3D printed gliders you will be able to “pull out” even more fun from ordinary rubber band ! Just 3 simple steps, and your glider will take off: hook it with an elastic band, pull it towards you and release it.

With this model on Thingiverse, you and your friends can take to the skies a whole fleet of these rubber gliders!

100% infill and a layer height of 0.1 mm are recommended for greater aircraft strength and longer life for thin wings.

4. Folding sword

Telescopic pirate sword. Source: Thingiverse

This toy may not be best given to a child when there are breakable items nearby. But in the right environment, telescopic swords will bring tons of fun and enjoyment to kids! From the designer of this folding pirate sword, you can also find models of telescopic katana, daggers and even lightsabers!

This Telescopic Pirate Sword is designed for printing at low speed using a 0.4mm nozzle. Also, successful printing requires a printer with a good retract and precise settings for Coast (turning off extrusion at the end of the layer print) and Wipe (“wiping” the nozzle at the end of the layer).

5. Micro Catapult

Hit all your enemies (or at least your deskmates). Source: Thingiverse

This little catapult is a great toy for kids and bored office workers alike. She can throw small crumpled pieces of paper and any other small things that will fit in her. Selected ammunition can fly about 2 meters, which is enough to hit unsuspecting victims at another table!

This model is an all-printed prefabricated assembly that does not require any supports or special adjustments. A minimum filling and layer height of 0.25 mm is sufficient.

Despite the fact that many catapults are made from PLA plastic, the author of the design still insists that this model is not for PLA, but for ABS plastic. We can also recommend PETG filament for this printing, which has the best qualities of PLA and ABS.

6. Top

The oldest toy for the whole family. Source: Thingiverse

As far as we know, the spinning top is one of the oldest toys in the world. In ancient times, tops were made from almost any material: from stone and wood to fruits and nuts. And now additive technologies allow you to make your own spinning top using a 3D printer! All you have to do is print this model, glue the pieces together and have fun with this simple yet fun toy!

Offered 0.2 mm layer height and 20% infill.

7. Moveable animals

Cute articulated octopus. Source: Thingiverse

Making flexible prints with a 3D printer has become completely affordable and common practice thanks to special filaments such as TPU. But what if we said that you don't have to use flexible plastics to create flex parts?

Using excellent hinges that are printed in one piece with the entire model, you can create movable flexing toys even from plastics such as PLA, ABS and PETG, without any additional settings and adjustments.

The standard specifies a layer height of 0.2 mm and an infill of at least 15%.

Most popular models:

  • Octopus
  • T-Rex
  • Lizard

8. Spirograph

Convenient case for creativity at any time. Source: Thingiverse

Everyone knows the children's toy spirograph, which allows you to easily draw masterpieces with repeating geometric patterns. But this model has gone a little further and is a whole case containing a platform for drawing and a compartment for storing gears and paper. It fits easily into your pocket, backpack and bag, so you can take it with you and paint whenever you want!

The case has several levels. The lower level holds slips of paper for notes, drawing gears and, if desired, a small pencil or pen, if, of course, you can find one. The next level provides a secure, flat drawing surface so you can make art while walking! The top level has fixed gear teeth and holds the piece of paper in place.

A layer height of 0.2 mm and an infill of 20% or more is recommended. As a loop, a regular straightened 1.75 mm filament thread is used.

9. Transformers

Toys from the planet Cybertron. Source: Thingiverse

Transformers are a hugely popular children's toy to this day, so these Optimus Prime and Megatron are sure to please your kids.

This printed Optimus Prime transforms from a classic Optimus truck into a fully functional standing robot. And it's amazing, considering that you immediately get a ready-to-use all-printed model right from the printing platform, which does not even require supports!

But, of course, every Optimus needs an opponent to fight. Therefore, you can also print Megatron, but it should be noted that his model is more difficult to print and consists of two parts.

10. Set of toy tools

The first tools for little craftsmen. Source: Thingiverse

The Toy Tool Set is a great way to introduce kids to basic tools, their appearance, purpose, and how they work. Print your child's first hammer, screwdriver and pliers and he'll feel like a real craftsman!

The hammer is modeled to fit two pieces together with a screw, but some users simply glue them together, which is just as pretty. You can also use a hammer to assemble pliers: just lay the two pieces on a flat surface with the screw down and tap lightly a couple of times.

Model can be found here.

11. Castle

Build your own medieval world! Source: Thingiverse

This medieval castle playset is meticulously designed for 3D printing. Walls and towers are easily attached to each other with a simple connection. You can make as many details as you want to create a large or small original castle layout of your own! The set contains walls, towers, houses, characters, animals and a variety of props to add to the fun of this medieval set.

All parts are small enough to be printed comfortably even on 3D printers with a small printable area: 140x140x140mm. For such purposes, the Flashforge Creator Pro 2 3D printer is perfect, equipped with two independent extruders and has excellent printing accuracy. This printer will cope with the study of small details, and two extruders will help you print several parts at once or one part in two colors!

12. Lego bricks

Your favorite constructor is now more accessible! Source: Pinterest

LEGO is one of the most popular toys for children. At the same time, the cubes of this designer are made of ordinary ABS plastic. So, having your own 3D printer, you can print the missing/lost Lego bricks yourself or even some of your author's design of the details of this amazing designer! At the same time, you can use not only ABS, but also other 3D plastics: PLA and PETG are also great.

Thingiverse has a lot of Lego models, and we'll take a look at one of them. It's customizable model of several different LEGO and LEGO DUPLO pieces. These bricks are not completely identical to real Lego, but they are compatible in every way.

13. Ballista

Fire! Source: Thingiverse

Introducing a fully printed ballista model, ready to use right out of the box. One has only to set the string and load the projectile, and this ballista will impress you with its simplicity and good range of the arrow. As a bowstring, you can use several layers of thread or ordinary stationery gum.

Recommended to print in PLA or PETG with 90% coverage and 0.2mm layer height.

14. Edible toys

The Open Toys project turns ordinary vegetables into toys. Source: Thingiverse

The project was originally envisioned as a way to turn commonly discarded residual materials such as wood and cork into toys: helicopters, planes, cars and so on. But soon, wood and cork were replaced by more accessible and easily pierced materials: fruits and vegetables. With this project, you can turn ordinary food items into fun personalized toys.

15. Anti-stress keychain

Entertaining keychain. Source: Thingiverse

Add some flair to your keychain with this cool little toy. She will entertain you wherever you are!

This model is not the easiest, but try it and you will definitely succeed! Important print quality settings are "Outer Walls Before Inner Walls" and being extra careful with temperature. It is printed with supports and requires a certain, sometimes lengthy, post-processing. Remove not only supports, but also make sure that the surface of the part is smooth, otherwise it will cling and stutter. A scalpel or a 1 mm drill will do. Periodically rotate the gears to see where it still sticks, which is especially true when using PLA.

16. Chunky Trucks set

Two models from the fun and cute Chunky Trucks set. Source: Thingiverse

The adorable Chunky Trucks collection includes various unique models of small trucks, fun builders and even a movable barrier. The cars are specially designed so that even the smallest children can play with them. Unlike builders, who are not recommended to be printed for toddlers so that they do not try to put them in their mouths, but which will greatly amuse older children.

All models can be printed without supports. And for long truck life, at least 25% infill and three-wall use are recommended.

17. Rattleswords

Arm your warrior! Source: Thingiverse

Rattles are an integral part of all babies. But what if we move away from banal and boring designs and build a rattle in the form of a sword for your little warrior? This fun design will not only amuse your baby, but also you, as this rattle will be a lot of fun to print!

All corners of the model are rounded for safety. There are also two versions of the tip. Initially, a gem was attached to the tip, but after some concern that the stone could slip off the tip and be swallowed by a child, a second version was created that did not include a gem.

Print two sets of peas first. Then, while printing the sword, throw them inside the blade. This will ensure that the peas stay inside the rattle forever. After printing all the elements, simply fasten them with superglue.

As with any printed toy, parental guidance is required. Be sure to throw away the toy if it breaks.

18. Viking Squigglepeeps

Three Viking Squigglepeeps set sail. Source: Thingiverse

Squigglepeeps is another kid-safe toy, this time with absolutely no glue required. These fun chubby Vikings and their boat are too big to choke on, making them suitable for kids of all ages. They look funny even in one color, but they will be even more beautiful if you paint them with child-safe paints! The model also absolutely does not require supports.

19. Math Spinner

A great way to have fun learning math! Source: 3Dtoday

This math spinner is the perfect companion for learning math. Moreover, it is suitable for all ages, because it is never too late to brush up on your arithmetic knowledge! You can print this finished model or modify it for yourself by removing or adding rings. This advanced design contains all the signs of addition, subtraction, multiplication, division, equality and inequality, as well as a pointer to the string to be solved! On the central insert there are special grooves for fixing. For this version, you will need to print 2 caps and 8 rings of numbers, the rest of the details are printed in a single copy.

Recommended coverage 25% and layer height 0.2 mm.

20. Jumping turtles

The variety of these turtles is amazing! Source: Thingiverse

Last but not least, jumping turtles! Agree, even the name sounds fun! And a variety of shell designs will give each turtle its own uniqueness. This model uses the same flex concept as the Mini Monster Truck above, making the Turtles bounce when you tap on the body. Also in this turtle, the head can be drawn into the shell.

The model is assembled with printed H-clamps and does not require glue. All parts are printed without supports. Also note that using the raft (rafts) and brim (margins) options can have a negative effect on the results if you don't then take the time to sand and clean the edges at the base.

If you have problems with head slip, you can try to print 1 of the 3 narrower shaft head files that the author has specially uploaded for this case.

Results

We hope you enjoyed this selection of toys for 3D printing, and you will definitely choose some option for yourself, because 3D printing of toys is not only fun and interesting, it is also a new experience and knowledge for both you and and for the child. But we have considered only some entertaining options from the many existing ones. And, of course, you can create your own unique designs and implement them on your 3D printer or contact our 3D printing studio for this. And toys printed by you can serve as a great unique gift, which is also one of the reasons to buy a 3D printer for your home.

50 3D Printing Ideas

It looks like we're about to start drowning in useless stuff made for 3D printing projects. But you can do something that will really be useful! If you're running out of ideas, here's a list of 50 3D printable items you're unlikely to throw away.

Bag clip with screw cap

Now the bag clip will have a new feature - a hole with a lid for quick access, as in the photo. This clip is easy to print and convenient to use. Strange that no one thought of this before.

Author: Minkix

Download: Thingiverse

Modular Furniture Connector

This connector allows you to quickly assemble modular furniture. The default model is designed for 17×17 mm wood, but the size and material can be changed to suit your needs using a parametric file for customization.

Author: LeFabShop

Where to download: Cults

Sealant cap

No more throwing open sealant tubes away. The screw cap for the nozzle presses the o-ring tightly against the body of the tube and closes the access of air to the solvents inside.

Author: The-Mechanic

Where to download: Thingiverse

Laptop niche

Now the laptop will always be at hand, but hidden from prying eyes in a special niche that is attached to the bottom of any coffee table.

Author: Too Snide

Download: Thingiverse

Phone holder - Candice

Elegant and simple, perhaps the easiest thing you can print on a 3D printer.

Author: Clem.C2

Where to download: Cults

Polypanels

The idea for Polypanels came from Devin Montes. A polypanel is a series of three-dimensional building blocks. The individual elements of a Polypanel look simple, but if you print a lot of them and different types, you can create all sorts of complex designs. Something like LEGO where you can design each brick.

Author: MakeAnything

Where to download: MyMiniFactory

Coat Hook

This coat hook is designed as an E3D nozzle and can be printed multiple times to fit all your clothes.

Author: Filar3D

Download: Cults

Plant Pot

This anatomical brain flower pot is easier to print than it looks, creator DrFemPop says. For assembly, it is only necessary to glue the parts after printing. It turns out an original house for plants.

Author: DrFemPop

Where to download: Cults

Door Holder

This is a simple solution for holding a door. Double-sided adhesive tape is sufficient for surface mounting.

Author: Akiraraiser

Where to download: Thingiverse

Piggy bank

A simple piggy bank for beginners, no complicated settings.

Author: lecaramel

Where to download: Thingiverse

Cable ties

This tie is perhaps the simplest and most ingenious of all devices. Clips are printed as a whole sheet at once, and then the required amount can be cut off from it.

Author: Sunshine

Where to download: Cults

Roller ruler

An indispensable device if you need to measure the length of something non-linear: a piece of rope, a curved line, a perimeter with bends, etc. The ruler is called Geneva and has step 5 mm.

Author: MechEngineerMike

Where to download: Thingiverse

Pliers

This small, solid piece of plastic can easily replace your pliers / pliers. These forceps take the force to the handles and redistribute it at the end of the grip. It's definitely pliers. Just smarter.

Author: BYU CMR

Where to download: Thingiverse

Cylindrical textured box

Beautiful tube from Syboulette decorated with hexagons. Well suited as a kitchen utensil for storing oatmeal, rice and other crumbly substances.

Author: Syboulette

Where to download: Cults

Door Stop

This stop is modeled after the Guyer Anderson cat statue in the British Museum. The design is hollow, which allows you to fill the limiter with something for additional weight.

Author: Duaneindeed

Where to download: Cults

Plague Doctor Mask

Not exactly the most useful item on the list since bubonic plague is a thing of the past. But a mask can come in handy, for example, when you need to clean up after your pet. And you can also go to the carnival in it.

Author: Odrivious

Download: Cults

Universal Spool Holder

This adjustable spool holder uses a spring and an adjustable rewind clutch. It's the perfect place to store those pesky wires.

Who made it: Vincent Goenhuis

Where to download: Thingiverse

Sturdy waterproof box

This tight-fitting box will keep things from getting wet. Print it in PLA or PETG, add a flexible TPU seal and M3 screws for the spring hinge, and you're done.

Author: ZX82

Where to download: Cults

Dice

This dice is suitable for flat 3D printing and has a face size of 16mm.

Author: Devin Montes (MakeAnything)

Where to download: MyMiniFactory

Collapsible Coat Rack

Really cool coat rack. That's all there is to say about her.

Author: Komaru

Where to download: Thingiverse

Business Card Holder

Perfect for showing off your new business cards to your Wall Street friends. What could be more delightful than this Zippo card holder with flip-top lid.

Author: PentlandDesigns

Where to download: Cults

Pencil and pen holder

Iceberg or melting beehive? Be that as it may, this is a handy pen and pencil holder that is cheaper to print than to buy.

Author: BeeVeryCreative

Where to download: Cults

Groovi Monster Audio Amplifier

This is a passive smartphone audio amplifier that looks stylish and does the job well. It's called Groovi Monster for a reason.

Author: 3DShook

Where to download: Cults

Cup holder

Can be used not only as a cup holder, but also as a coaster for hot dishes. The dimensions of the template are easily adjusted to suit any size cookware.

Author: jmdbcool

Where to download: Thingiverse

Clamp

Designed to hold different materials, including the ends of the wire in the coil. Also great as a clothespin replacement.

Author: Med

Where to download: Cults

Pencil Box

Suitable for storing all your desk trivia and trinkets (memory cards, rubber bands, pencils, paper clips, etc.).

Author: Monkey3D

Where to download: Cults

Headphone holder

This is a duck. Yes, you can hang headphones on it.

Author: Toshi_TNE

Download: Thingiverse

Polyhedral Succulent Pot

Unusual geometric pots for your growing succulent collection. These small pots can be configured to be connected together.

Author: PrintFutura

Download: Cults

Survival whistle

This is a survival whistle with original design. It is durable, easy to make and very loud (118 dB is more than enough to be heard in an emergency).

Author: Joe Zisa

Where to download: Thingiverse

Measuring Cube

Simple and original measuring cube for the kitchen. On each side there are recesses for measuring the volume of ingredients (in cups - according to the American system, and in metric units for everyone else). It is best to print with PETG material, it is the safest for products.

Author: iomaa

Download: Thingiverse

Hinge

This is a parametric hinge that can be sized to suit your specific needs.

Written by Rohin Gosling

Where to download: Thingiverse

Car Eyeglass Holder

Attaches to your car's sun visor. Glasses will always be at hand.

Author: Trevor Long

Download: Thingiverse

Opener

The simplest things are usually the most useful. Convenient and easy to print opener. Covers the sharp edges of the cork as much as possible, protecting you from injury.

Author: Jeremy Peterson

Download: Thingiverse

Superhero Keychains

Sometimes you need to remind yourself of your hidden superpowers. Stylish and cool keyrings are well suited as a small gift.

Author: Formbyte

Where to download: Cults

Headphone stand

It will be useful for music lovers and gamers who use headphones a lot and often. After all, now they will no longer roll around anywhere.

Author: MakerBot

Where to download: Thingiverse

Bag Clip

The model consists of two printed parts. Allows you to keep packages closed and keep food fresh longer.

Author: Walter Hsiao

Download: Thingiverse

Plastic wrench

Handy wrench, but don't choose soft plastic to make it.

Author: Daniel Noree

Where to download: Cults

Sliding Decal

No more worrying about whether cups are clean or dirty right now in the dishwasher! With the help of a special mechanism, the slider easily changes the inscription on the plate.

Who made it: MiddleFingerBoss

Where to download: Thingiverse

Collapsible basket

Cool picnic item. A folding square basket with five sections is printed from several parts and then glued together. For product safety, it is recommended to use PETG plastic.

Author: PatternToPrint

Where to download: Cults

Self-watering plant pot

Houseplants are dying from your forgetfulness? This will not happen again! This pot will water them by itself, and your conscience will be clear.

Author: Parallel Goods

Where to download: Cults

Maze Gift Box

Cash is not the most original gift. But if you present them in such a gift box, your friend will surely like it. The lucky recipient will have to work hard to get to the prize, because there is only one right way.

Author: Robert

Where to download: Thingiverse

Wired headphone holder

The headphones will now be protected from tangling and breakage.

Author: Robert

Where to download: Thingiverse

Tube Squeezer

Helps squeeze out the contents of the tube to the last drop. Wide enough to fit most tubes on the market. Printed in three separate parts.

Author: Justin Otten

Where to download: Thingiverse

Webcam Slider Shutter

The best thing for the paranoid and just for those who are uncomfortable being under the gun of a webcam. Instead of sticking tape or sticky tape over the lens, attach a slider shutter to the body and open it when you need a video call.

Author: Horizon Lab

Where to download: Cults

Hexagonal Prefabricated Drawers

Useful to free your desk from the noodles of cables, wires and just every little thing. The design can be easily expanded if necessary.

Created by Dan O'Connell

Where to download: Cults

Wall Phone Shelf

Attach the shelf to a power outlet and place your phone on it while charging.


Learn more