(506) 2240-6804
Flashforge finder lite 3d printer
Flashforge Finder Lite Review - ToBuyA3DPrinter.com
7.0 Okay
Flashforge have been missing the mark lately with overpriced printers that can’t compete with cheaper models. Their attempt to force users to buy their branded filament also hasn’t gone over well with the community. Have Flashforge made up for their past missteps with the Finder Lite, or is this another disappointment for the Flashforge lineup?
More Details ❯
Flashforge officially retired their ultra popular, beginner friendly Flashforge Finder. Although the company claims that the Adventurer 3 Lite replaced the original Finder, we think the Finder Lite is a much closer comparison. In fact, the Finder and Finder Lite are almost identical.
More Details ❯
To start, both share the same build volume, measuring 5.5” x 5.5” x 5.5”, as well as the same exterior volume of 16.6” x 16.5” x 16. 5”. And, like the Finder, the Finder Lite prints exclusively in PLA, in part because the print bed remains unheated. Precision has thankfully been upgraded, however, with the Finder Lite capable of printing in resolutions as small as 50 microns.
As Flashforge users have come to expect, the machine comes with Flashprint software for better or worse. The biggest difference between the Finder and the Finder Lite is that the Finder Lite only includes SD card connectivity, whereas the Finder provided USB, WiFi and SD connection options. Some users are bummed to lose out on Flashcloud due to the Lite’s lack of internet access. It’s important to note, though, that the Finder Lite is over $100 cheaper than its predicessor.
Flashforge Finder Lite Review ProsEasy Setup, Good for BeginnersThe Flashforge Finder Lite takes just minutes to set up out of the box, making it ideal for nervous beginners. It also includes assisted bed leveling, which while the tone is annoying, is an otherwise painless procedure that takes just a few minutes.
The included FlashPrint software nicely offers both Beginner and Advanced setting options, and since you’re only printing in PLA, you rarely need to change print settings anyway.
More Details ❯
Safe OperationSeveral features make the Finder Lite an extremely safe 3D printer that’s even appropriate for children. Where most printers feature heated print bed and exposed nozzles, the Finder Lite’s print bed doesn’t heat up at all. The nozzle is also covered while printing. Additionally, the Finder Lite is semi-enclosed, like the original Flashforge Finder, meaning all cables are well hidden. There’s virtually no chance of burning yourself, nor do you need to practice any cable management.
Flashforge Finder Lite Review ConsFilament LimitationsNot only are you limited to using PLA with the Finder Lite, you also need to use Flashforge’s proprietary filament if you use the included spool-cartridge system that’s built into the printer.
Thankfully, you can easily get around this issue by printing a new, exterior filament spool holder, or even by buying one. This is a small inconvenience with a simple solution but is an annoyance nonetheless. Flashforge need to get over their insistence on forcing filament dependence.
Being limited to PLA is fine for beginners and young users. However, consider this restriction carefully if you ever intend to print in other popular materials like ABS or TPU.
Generally LackingWe already know the Finder Lite only prints in PLA, but there are more features this printer lacks. The build volume, for example, is tiny even for a budget 3D printer. And, while most users won’t have a problem using an SD card, the Finder Lite doesn’t even include USB connectivity, which is a standard feature in most printers. We’re left wondering, what does the Finder Lite do?
Flashforge Finder Lite VerdictMore Details ❯
While the Finder Lite does everything it says on the box very well, that doesn’t amount to much at the end of the day..jpg)
We only really recommend this printer for children, or for an educational setting, since it does have excellent safety features. For everyone else, however, the Flashforge Finder Lite just doesn’t offer enough to compete with other sub-$300 printers like the Ender 3 or QIDI TECH X-one2. These printers offer the same or larger build volumes, broader filament options, and more connectivity flexibility than the Finder Lite.
Share. Twitter Facebook Google+ Pinterest LinkedIn Tumblr Email
FlashForge Finder 3D Printer Review 2022
4
See Price
| Printing Area | 140mm x 140mm x 140mm |
| Layer Resolution | 100 to 500 Microns |
| Supported Filament | PLA |
| Filament Diameter | 1.75mm |
| Extruders | 1 |
| Extruder Diameter | 0. 4 mm |
Dubbed as an easy to use, safe, and affordable 3D printer designed for novices and children, does the Flashforge Finder follow in the company’s illustrious footsteps and fit this ostentatious bill? Nothing short of a resounding yes on our part, but let’s get into the details.
Table of ContentsShow
Design and Features
In keeping with its purported entry-level target market, the Finder dons a compact, yet sleek cuboid design with smooth contours and edges. The color scheme sandwiches a glossy black central shell with astonishing red top and bottom casing that also runs up the sides of the filled-in back panel. A series of tasteful blue LED strips also illuminate the build area.
The Finder is constructed through and through with quality plastic-alloy that respects Flashforge’s aim of providing a cost-effective 3D printer without skimping too drastically on quality. Plastic-alloy isn’t necessarily as desirable as a full aluminum frame and body, but given the Finder is open on all sides except for the back panel, the choice of material works and isn’t out of place.
The innards are concealed within the frame propping up the Finder’s prim overall look. The cabling and mechanical parts are all but invisible with this carrying over to the contained extruder casing. The Finder is comparatively small in 3D printer terms, but weighs a sturdy 27 lbs and holds its ground on any surface thanks to low-profile rubberized feet; in other words, portable with a rigid build.
Sticking to the tried and tested FFF technology formula coupled with the now ubiquitous XYZ Cartesian configuration, the Finder proposes a 140mm x 140mm x 140mm build area suited to novices who want a printer to cut their maker teeth. Don’t get us wrong, the build area is tiny compared to usual standards, but as with many features sticks to the ethos of the Finder.
A no-nonsense, direct drive single extruder takes charge of laying down filament with a standard 0.4 mm nozzle diameter capable of layer resolutions anywhere from a chunky 500 microns down to what we consider a remarkably detailed 100 microns if we take into account the price tag associated with the Finder.
The extruder moves the X and Y axes running on the usual dual rod setup, while the bed navigates the Z axis with a threaded rod and two smooth pilot rods. Nothing innovative here, but Flashforge are ensuring consistency by falling back on a proven configuration prized for its reliability.
In what is probably the most limiting feature of the Flashforge Finder, the printer only supports PLA filament with a standard diameter of 1.75 mm. If we were reviewing a printer sold at three times the price, this would be a huge negative, but in the case of the Finder, this lack of versatility is in many ways a positive. Beginners will appreciate the simplicity of only having to worry about using PLA (arguably the most straightforward material to work print with) and benefit from a printer wholly designed around it.
The filament cartridge is implemented into the build of the Finder via a vertical compartment located at the top of the back panel. Once loaded in the spool tray and clipped back into the printer, you wouldn’t know there’s a whole cartridge of PLA waiting to be used from merely looking at the Finder.
Due to size constraints, it does limit usage to a maximum spool size of 0.6 kg but conversely protects the filament from environmental degradation from light, dust, and moisture.
PLA support is third-party so you can buy directly from Flashforge or save a few dollars and buy wholesale from an alternative vendor. Equally, if you have a stock of 1kg spools, you can print or buy a standalone spool holder which will work great with the Finder as well.
The printer is also fitted with a filament detection feature that determines how much material is left before a print begins and pauses the process to allow the user to exchange the filament cartridge.
The glass build plate is non-heated and as we aren’t dealing with ABS this isn’t a problem. In a further attempt to simplify the Finder’s overall functionality, the build plate is detachable thanks to a slide-in mechanism designed to facilitate the removal of finished prints and minimize inadvertent damage.
Although the Finder has no SD card slot, it makes up for this omission with Wi-Fi, USB-to-PC, and USB flash drive port connectivity.
Additionally, the printer has an internal memory of 4GB to store print files. You can finish up a print without having to run a PC for the duration of the process, or run the printer completely untethered after sending over the print files through USB or Wi-Fi.
A 3.5-inch full-color HD IPS touchscreen adorns the top of the printer with intuitive smartphone-inspired controls. It allows the adjustment of a range of settings from homing and pre-heating the extruder to filament loading/unloading and triggering prints as well as monitoring the nozzle temperature and print progression.
Flashforge ships the Finder with its own slicing software called FlashPrint, which is among the most intuitive we’ve come across with settings suited to beginners and versed tinkerers alike (scaling, rotating, supports, resolution, cut, shell thickness, infill amount, 2D to 3D conversion, preset profiles, skirt/brim/raft).
The Finder is also compatible with your favorite third-party slicer such as Sli3er or you use software like 3DMax to generate STL and OBJ files to then port them over to FlashPrint.
The printer is also ”Polar Cloud Enabled”, meaning it is compatible with Flashforge’s remote monitoring and printing features.
Assembly
The FlashForge printer comes pre-assembled sandwiched in two thick styrofoam cutouts housed inside a standard cardboard box. Styrofoam trays sit in the chamber containing the various components that ship with the printer.
The package contains the printer, a quick start guide, power cord and adapter, filament guide tube, one spool of PLA, USB cable, glue, and a tool bag containing Allen keys, a wrench, screwdriver, unclogging pin tool, PTFE tube, and grease.
Unpacking is straightforward and the only real difficulty, if we can even call it that, is raising the bed plate to remove the final layer of styrofoam. Four zip ties secure the rods in place and are easily removed.
The instructions are clear and given the few small unboxing steps are more than enough to guide the wariest of first-timers.
As for hardware assembly, the filament needs loading into the cartridge holder, the filament tube fitting, and filament loaded into the extruder (after preheating).
Again the instructions are clear and the process very easy. To finish off the hands-on assembly, we plugged in the power cord and adapter.
At this point we expected the printer to spring to life only for it to do nothing. A bit of curious prodding later we realized the button next to the LCD was the power button. The instructions made no mention of this, which slightly marred our overall experience of setting up the Finder especially given it is geared towards beginners.
Next, we had to level the bed using the in-built assisted leveling system, which couldn’t be easier. The printer provides clear instructions as to which leveling screw you need to adjust and by how much thanks to audio beeping cues. It took no more than five minutes and is entirely fit for a beginner with no levelling experience.
From our many journeys on various 3D printing forums, we established that updating the firmware was imperative before embarking on our first print job. Flashforge is continuously at work trying to better the software side of their products and users have recorded markedly enhanced performance by staying up to date with the latest firmware update.
We followed suit.
Printing
Our first few prints with the Finder were nothing short of disastrous with the first layer continuously dislodging from the bed plate about halfway through each print. A little ingenuity and the use of a draft coupled with a good dose of either hair spray, builder’s tape, or the provided glue and the Finder sprung to life.
The quality of the prints is pretty marvelous if we consider the price of the Finder. We noticed very few structural issues. There was the occasional blemish here and there, and a few layering discrepancies, but nothing that a bit of post-print sanding and TLC couldn’t fix. Overall, we are hard pressed to find much wrong with the prints once the Finder finds its groove.
Of course, the limited build volume did limit our ambitions somewhat, but given the printer is targeted towards educational and beginner markets, the chances are it is more than enough for most situations.
FlashPrint was a pleasure to use and the process for selecting a file, running it through the software, porting it to the printer, and triggering the print from the LCD was nothing short of child’s play.
Finally, we have to note how silent the Finder is. It is by far the quietest we’ve used.
Support
The Finder has a standard 180-day manufacturer’s warranty, with the ability to boost it to 12 months via Flashforge’s illustriously named ProCare Extended Warranty, but you’ll pay handsomely for the pleasure.
As for hands-on support, the Flashforge support team is responsive and knowledgeable bolstered by a rich library of walkthrough videos, troubleshooting guides, and general learning material over on the company’s well designed and accessible web site.
Verdict
A compact printer that works out of the box, the Finder is entirely geared towards beginners and curious students in an educational context. The setup is among the simplest we’ve come across, and the Finder earns points for breaking down assembly without dumbing it down utterly.
After weathering a few adhesion challenges (more than likely fruit of our ineptitude and a lack of clear instructions rather than the printer itself), the quality of the prints is high and reliably so.
In our estimation, the Finder is well worth the price tag and given its affordability is an ideal first printer for any budding maker eager for a soft and gentle introduction to the world of 3D printers.
Flashforge 3D printers
home
Manufacturers
Flash Forge
3D Printers Photopolymer resins Accessories Other
- 3D Printers
- Photopolymer resins
- Accessories
- Rest
- Education
3D printer Flashforge Dreamer
Pre-order
Working chamber
230 x 150 x 150 mm
Layer thickness from
100 µm
across the Russian Federation from 10 000
FlashForge Inventor 3D printer
Out of production
Working chamber
230x150x160 mm
Layer thickness from
50 µm
across the Russian Federation from 10 000
3D printer FlashForge Inventor II
Product discontinued
Working chamber
140x140x140 mm
Layer thickness from
50 µm
across the Russian Federation from 10 000
3D printer FlashForge WaxJet 300
Product discontinued
Working chamber
304x185.
5x200
Layer thickness from
16 µm
across the Russian Federation from 10 000
3D printer FlashForge Inventor IIS
Product discontinued
Working chamber
140x140x140 mm
Layer thickness from
50 µm
across the Russian Federation from 10 000
3D printer Flashforge AD1
Product discontinued
Working chamber
600x600x70 mm
Layer thickness from
200 microns
across the Russian Federation from 10 000
3D printer FlashForge Guider
Product discontinued
Working chamber
250 x 250 x 200
Layer thickness from
100 µm
across the Russian Federation from 10 000
3D printer FlashForge Foto 8.
9s
Pre-order
Working chamber
192х120х200 mm
Layer thickness from
25 microns
Technology
LCD across the Russian Federation from 10 000
3D printer FlashForge Foto 13.3
Pre-order
Working chamber
295х165х400 mm
Layer thickness from
50 microns
Technology
LCD across the Russian Federation from 10 000
3D printer FlashForge Foto 6.0
Pre-order
Working chamber
130х78х155 mm
Layer thickness from
50 µm
Technology
LCD
across the Russian Federation from 10 000
3D printer FlashForge Foto 8.9
Pre-order
Working chamber
192x120x200 mm
Layer thickness from
25 microns
Technology
LCD across the Russian Federation from 10 000
3D printer FlashForge Focus 8.
9
Pre-order
Working chamber
192x120x200 mm
Layer thickness from
25 microns
Technology
LCD across the Russian Federation from 10 000
FlashForge Finder 3D printer in Rubtsovsk: 500 items: free shipping, 13% discount [link]
Affiliate programHelp
Rubtsovsk
Catalog
Catalog of Products
Clothing and Shoes
Clothing and Shoes
Building Materials
Building Materials
Textiles and leather
Textiles and skin
Health and beauty
Health and beauty
Children goods
Children's goods
Food and drinks
Food and drinks
Electrical engineering
Electrical engineering
Trade and warehouse
Trade and warehouse
Industry
Industry
House and Garden
House and Garden
Water, Gas and Heat
Water, Gas and Heat
All categories
included
3D 3D 3D-printer Flashforge Finder
Nozzle for 3D printer FlashForge Finder brass 0.
2 mm Country of origin: China, Thread: M6
0274 Printer FlashForge Finder Latun 0.5 mm Country Manufacturer: China, thread: M6
Read more prices and similar goods
Shall for 3D Flashforge Finder 9027 : China, Thread: M6
MORE prices and similar products
Nozzle for 3D printer FlashForge Finder brass 0.3 mm Country of origin: China, Thread: M6
more than prices and similar goods
nozzle for 3D printer Flashforge Finder Latut Country Manufacturer: China, Carb: M6
more details
Libe for 3D FlashForge Finder brass 0.8 mm Country of origin: China, Thread: M6
0003
1 629
1714
3D Printer Funssor 232 154 mm Flashforge Creator Pro/2 Dreamer, 1 pcs.
