Cheap used 3d printer

Just 10 years ago, a 3D printer cost over $100,000. Today, you can easily find a cheap 3D printer for under $200. It's amazing. nine0005

Naturally, the lower the price, the more restrictions. Some of the printers on our list will not have a heated bed and the workspace will be small. Naturally, the quality of most of the models presented below cannot compete with more expensive counterparts.

But with a little patience and diligence, it is quite possible to achieve high-quality 3D printing on a printer that costs half the price of a flagship smartphone. And it's really cool!

Important note : All 3D printers in this top are supplied assembled by the manufacturer. If you have free time and want to spend less money, you can buy DIY kits and assemble the 3D printer yourself according to the instructions.

List of the best cheap 3D printers in the price range from $ 200 to $ 1000

3D Printer	Material Material	Working space (mm)	Price
459
Flashforge Finder	PLA	140 x 140 x 140	499
XYZPRINING DA vinci jr. 1.0 Pro	PLA	150 x 150 x 150	499
XYZprinting da Vinci Jr. Mix 2.0	PLA	150 x 150 x 150	599
Printrbot Simple
Dremel Idea Builder	PLA	230 x 150 x 140	899
Printrbot Simple Pro	PLA	200 x 150 x 200	999
Prusa i3 MK2	PLA, ABS, exotic	250 x 210 x 20022

In the article we are considering unfinished, but high -quality 3D printers from AM etc. nine0005

If you want to buy them, even if you live in large cities such as Kyiv, Moscow, St. Petersburg, Minsk, it may turn out that these models will not be in the online stores of your city, or they may be with a decent mark-up relative to the cost that indicated in the article.

Since most of them are European / American, it is possible that they will not be in stores at all.

Therefore, before making a choice, I recommend looking directly at eBay, Amazon, Aliexpress, etc. - many sellers on these planforms deliver to the CIS countries within 1-4 weeks on average. nine0005

It is especially worth monitoring these platforms during the discount period - Black Friday or Chinese New Year (Aliexpress or Gearbest) - prices on such days can be 2 or more times lower than usual and it is worth waiting for a few weeks.

Monoprice MP Select Mini ($199)

Probably the best 3D printer on our list. Why? Because the Monoprice MP Select Mini is an impressive development with a thoughtful, compact design at a very low price. This model has a quick-change steel material feed wheel, a cooler for cooling the nozzle, a color LCD screen, a heated table, plus the ability to transfer models for 3D printing via microSD or USB. nine0005

The heated bed and wide temperature range of the extruder are especially pleasing, because for such a small price you get the opportunity to print in different materials: from ABS B to PLA or exotic materials like conductive PLA plastic, wood, metal-based composites and PVA.

For those who are worried about the lack of a guarantee - for such a price it is possible without it. This model is upgradeable. For example, you can install a new nozzle, change the table and add WiFi connectivity. nine0005

Small working space - 120 x 120 x 120 mm. Over time, this will definitely not be enough for you.

Specifications of cheap 3D printer Monoprice MP Select Mini

• Printer type: FDM;
• 3D printing materials: ABS, PLA, exotic;
• Working space: 120 x 120 x 120 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• 3D printing speed: 55 mm/s;
• Compatible with materials from other manufacturers: yes; nine0346
• Heated table: yes;
• Nozzle diameter: 1. 75 mm;
• Control panel on 3D printer: yes;
• Connection: SD card, USB.

Back to the list of 3D printers

M3D Micro Retail ($249)

The M3D Micro 3D printer hit the market thanks to Kickstarter. This model was presented with an incredible price of $349.

The working space of the M3D Micro is 109 x 113 x 166 mm. There are several body color options. The company has implemented "Micro Motion Technology" - a set of innovative solutions - thanks to which you get excellent quality 3D printing at a small price. nine0005

Today, this inexpensive 3D printer already costs even less than the price announced on Kickstarter. You can buy it for $249 with a 12 month warranty. By the way, it is already possible to pre-order the next "pro" version.

Specifications of cheap 3D printer M3D Micro Retail

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 116 x 109 x 113 mm;
• Minimum layer height: 50 microns; nine0346
• Maximum layer height: 350 microns;
• Number of extruders: 1;
• XY accuracy: 15 microns;
• Open Source: no;
• 3D printing speed: 55 mm/s;
• Compatible with materials from other manufacturers: yes;
• Heated table: yes;
• Nozzle diameter: 1. 75 mm;
• Control panel on 3D printer: no;
• Connection: USB.

Back to 3D printer list

XYZprinting da Vinci Mini ($289)

Da Vinci Mini is a successful attempt to make the 3D printer user-friendly. This model has only one button and 5 multi-colored indicators that reflect the current status of 3D printing. In addition, this affordable 3D printer is WiFi capable so you can control it over a network in your home, office or lab.

Unfortunately, you can only use the manufacturer's own 3D materials. On average, they cost 20% more than usual. However, the company also argues that the materials used (PLA) will be 100% non-toxic. nine0005

Specifications of cheap 3D printer XYZprinting da Vinci Mini

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 150 x 150 x 150 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• Open Source: no;
• Compatible with materials from other manufacturers: no;
• Heated table: no;
• Nozzle diameter: 1. 75 mm;
• Control panel on 3D printer: yes; nine0346
• Connection: USB, WiFi.

Back to 3D printer list

Monoprice Maker Select V2($299)

The next cheap 3D printer with a good reputation is the Monoprice Maker Select V2.

This model is an analogue of the Wanhao Duplicator i3, which, in turn, borrowed the design from the Prusa i3. But this does not affect the quality, as the Monoprice Maker Select V2 is easy to use and gives excellent 3D printing results.

Monoprice Maker Select V2 design feature is that the power supply and control panel are placed outside the 3D printer. The working space of this model is 200 x 200 x 180 mm. And this is really a good indicator for the money. nine0005

Specifications of cheap 3D printer Monoprice Maker Select V2

• Printer type: FDM;
• 3D printing materials: ABS, PLA, exotic;
• Working space: 200 x 200 x 180 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• Open Source: software;
• Compatible with materials from other manufacturers: yes;
• Heated table: yes;
• Nozzle diameter: 1. 75 mm; nine0346
• Control panel on 3D printer: yes;
• Connection: USB, SD card.

Back to the list of 3D printers

New Matter MOD-t ($299)

New Matter is a young startup that offers a 3D printer MOD-t - An interesting design with a minimalistic design. This cheap 3D printer is WiFi enabled so you can manage print settings and print from your computer, tablet or smartphone. The working space is 150 x 150 x 125 mm. Thanks to the case, the noise during its operation is reduced. But the most interesting and attractive thing about MOD-t is the price. Only $299. In general, this is an interesting, high-quality model.

Specifications of cheap 3D printer New Matter MOD-t

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 150 x 100 x 125 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• Open Source: no;
• Compatible with materials from other manufacturers: yes;
• Heated table: no;
• Nozzle diameter: 1. 75 mm; nine0346
• Control panel on 3D printer: no;
• Connection: USB, WiFi.

Back to the list of 3D printers

Printrbot Play ($399)

The Printbot Play is a very popular budget 3D printer that is often used in education. This inexpensive, reliable model, which is almost entirely made of metal.

The working space is 100 x 100 x 130 mm. Printbot Play has an extruder manufactured by the company itself - Alu Extruder v2. The body is made of powder coated steel and aluminium. SD slot provided. nine0005

You can upgrade the basic design of the Printrbot Play with a heated stand or increase the Y-axis stroke.

Connection: USB, SD card.

Back to 3D Printer List

Wanhao Duplicator i3 Plus ($459)

The Wanhao Duplicator i3 Plus is an upgraded version of the popular Wanhao Duplicator i3 (which in turn is based on the Prusa i3).

The main features of this cheap 3D printer are a large working space of 200 x 200 x 180 mm, a steel frame, electronics integrated into the design itself (previously it was taken out separately), a slot for a full-size SD card and a touchscreen display for control. nine0005

Wanhao Duplicator i3 Plus Cheap 3D Printer Specifications

• Printer type: FDM;
• 3D printing materials: ABS, PLA, exotic;
• Working space: 200 x 200 x 180 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• Open Source: design and software;
• Compatible with materials from other manufacturers: yes;
• Heated table: yes;
• Nozzle diameter: 1.75 mm; nine0346
• Control panel on 3D printer: yes;
• Connection: USB, SD card.

Back to the list of 3D printers

Flashforge Finder ($499)

FlashForge Finder is one of the newest 3D printers on our list. This affordable 3D printer offers an average working space of 140 x 140 x 140mm.

This Finder features a transparent sidewall design so you can view the 3D printing process from any angle. A color display is installed, it is possible to transfer data via WiFi network. The printer comes with some supplies and a USB flash drive, so you can start 3D printing almost immediately. nine0005

Specifications of cheap 3D printer FlashForge Finder

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 140 x 140 x 140 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• XY accuracy: 11 microns;
• Open Source: no;
• Compatible with materials from other manufacturers: yes;
• Heated table: no;
• Nozzle diameter: 1. 75 mm; nine0346
• Control panel on 3D printer: yes;
• Connection: USB, WiFi.

Back to 3D printer list

XYZprinting da Vinci Jr. 1.0 Pro ($499)

What's so special about the da Vinci Jr. 1.0 pro? This is a new model from XYZPrinting, which includes many advanced features, such as support for printing materials from other manufacturers and increased speed of 3D printing.

Also features an auto-calibration mechanism, a closed chamber with a unique cooling system, and a 0.3mm nozzle option for high-quality printing of fine model details. All in all, this is a great 3D printer with a lot of useful features and at a low price. nine0005

Specifications for cheap 3D printer da Vinci Jr. 1.0 Pro

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 150 x 150 x 150 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• Open Source: no;
• Compatible with materials from other manufacturers: yes;
• Heated table: no;
• Nozzle diameter: 1. 75 mm;
• Control panel on 3D printer: yes; nine0346
• Connection: USB, SD card.

Back to 3D printer list

XYZprinting da Vinci Jr. Mix 2.0 ($599)

XYZprinting provides a wide range of low cost 3D printers. And paying attention to each model is quite difficult, although many of them are very interesting.

XYZprinting da Vinci Jr. Mix 2.0 stands out because it can print with two different materials and mix them to create multi-colored models. This dual-color 3D printing technology is rare in this price range ($500 to $1,000), so if you're interested in experimenting with multicolor printing, XYZprinting da Vinci Jr. Mix 2.0 is a great choice. nine0005

However, there is a drawback. This 3D printer is not compatible with materials from other manufacturers, so you will have to buy special materials from XYZprinting (as we mentioned above, they cost 20% more, but are not toxic).

Specifications of cheap 3D printer XYZprinting da Vinci Jr.

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 150 x 150 x 150 mm;
• Minimum layer height: 200 microns; nine0346
• Number of extruders: 1;
• Open Source: no;
• Compatible with materials from other manufacturers: no;
• Heated table: no;
• Nozzle diameter: 1.75 mm;
• Control panel on 3D printer: yes;
• Connection: USB, SD card, WiFi.

Back to 3D printer list

Printrbot Simple ($599)

Printrbot Simple is the flagship of the Printbot empire. This model has a great open design with a solid aluminum frame and a working space of 150 x 150 x 150mm. This inexpensive 3D printer comes fully assembled at a very good price. As you need and want to experiment, you can add a heated table and expand the workspace in the horizontal plane. nine0005

Specifications of cheap 3D printer Printrbot Simple

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 150 x 150 x 150 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• 3D printing speed: 80 mm/s;
• Open Source: design and software;
• Compatible with materials from other manufacturers: yes;
• Heated table: optional; nine0346
• Nozzle diameter: 1. 75 mm;
• Control panel on 3D printer: no;
• Connection: USB.

Back to the list of 3D printers

UP mini 2 ($599)

The UP mini 2 is a low cost 3D printer that packs in impressive design and functionality. For starters, it has a touch screen panel and the ability to connect via WiFi.

But the most interesting is further. Implemented power failure protection system. 3D printing will continue after the emergency stop. Built-in HEPA air filtration system. Automatic detection of the height of the extruder nozzle. A separate, closed container for the material, thanks to which it does not deteriorate under the influence of moisture from the environment. nine0005

Great 3D printer for a small price. The only thing that upsets me a little is the small working space - 120 x 120 x 120 mm.

Specifications of cheap UP mini 2 3D printer

• Printer type: FDM;
• 3D printing materials: PLA, ABS;
• Working space: 120 x 120 x 120 mm;
• Minimum layer height: 150 microns;
• Maximum layer height: 350 microns;
• Number of extruders: 1;
• Open source: no;
• Compatible with materials from other manufacturers: yes;
• Heated table: yes;
• Nozzle diameter: 1. 75 mm;
• Control panel on 3D printer: yes;
• Connection: USB, WiFi.

Back to the list of 3D printers

Monoprice Maker Select Ultimate ($699)

The Monoprice Maker Select Ultimate is an extraordinary beast that combines elements from two leaders in the world of 3D printing - Zortax and Ultimaker. The Monoprice Maker has an aluminum perforated printing table, which was offered in the Zortax M200 (thanks to this table, the grip of the base of the model with the table is much better), and the software part is almost identical to Ultimaker 2 (very user-friendly interface and functionality). nine0005

This model uses a "Bowden extruder", i.e. the feed units and nozzle are separated, unlike the direct feed. This improves reliability and reduces the likelihood of 3D printing errors (although, most likely, it was necessary to sacrifice printing speed, as the weight of the printing unit increases). Given the cost, this is a good model, the analogues of which are much more expensive.

Specifications of cheap UP mini 2 3D printer

• Printer type: FDM; nine0346
• 3D printing materials: PLA, ABS, exotic;
• Working space: 200 x 200 x 175 mm;
• Minimum layer height: 20 microns;
• Number of extruders: 1;
• Open Source: no;
• Compatible with materials from other manufacturers: yes;
• Heated table: yes;
• Nozzle diameter: 1.75 mm;
• Control panel on 3D printer: yes;
• Connection: USB, SD card.

Back to the list of 3D printers

Robo C2 ($799)

The Robo C2 is a small 3D printer with tons of connectivity options. Using a specialized application, you can monitor the status of 3D printing from your smartphone or tablet. It can be connected to a Chromebook. Thanks to the built-in slicing program, you do not need to install additional printing software.

Probably the most impressive is the integration with Amazon Alexa. Users can stop, cancel and check the status of 3D printing in real time using voice commands. nine0005

What does this inexpensive 3D printer offer? Working space 127 x 127 x 150 mm. The 3D printing speed is 300 mm/s and the resolution is 20 microns. There is a built-in 3.5'' color touch screen, a system for monitoring the amount of remaining material for printing, automatic calibration and a removable self-aligning print platform. The only drawback is that the table is not heated, so you have to use PLA plastic.

Specifications of cheap 3D printer Robo C2

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 127 x 127 x 150 mm;
• Minimum layer height: 20 microns;
• Number of extruders: 1;
• Open Source: software;
• Compatible with materials from other manufacturers: yes;
• Heated table: no;
• Nozzle diameter: 1.75 mm;
• Control panel on 3D printer: yes;
• Connection: USB, WiFi.

Back to the list of 3D printers

Wanhao Duplicator 4S ($829)

The Duplicator 4S has 2 extruders. It's essentially a copy of the MakerBot Replicator. Behind the steel body is the MK10 material feed mechanism, which is currently the easiest to use and most sought after in the market for 3D printer components.

One of the features of this model is a high-precision material feed wheel, which ensures the same filament feed speed. The Duplicator 4S is equipped with a 0.4mm precision nozzle. nine0005

Specifications of cheap 3D printer Duplicator 4S

• Printer type: FDM;
• 3D printing materials: ABS, PLA, exotic;
• Working space: 225 x 145 x 150 mm;
• Minimum layer height: 100 microns;
• Maximum layer height: 500 microns;
• Number of extruders: 2;
• XY accuracy: 11 microns;
• 3D printing speed: 40 mm/s;
• Open Source: software;
• Compatible with materials from other manufacturers: yes;
• Heated table: yes;
• Nozzle diameter: 0.4 mm;
• Control panel on 3D printer: yes;
• Connection: USB, SD card.

Back to the list of 3D printers

Polar 3D Printer ($899)

Polar 3D belongs to a separate category of 3D printers in this top, since this model implements the polar coordinate system. This causes the table to rotate and the print head to move up, down, right, and left. nine0005

Thanks to the polar coordinate system, this 3D printer is powered by two stepper motors, so it consumes less power. In addition, it turned out to realize a larger size of the working area: 203 (table diameter) x 152 (Z coordinate) mm.

Nominal price $899, but there are special discounts for educational institutions. The discounted price is only $599.

Specifications of cheap 3D printer Polar 3D

• Printer type: FDM;
• Materials for 3D printing: PLA;
• Working space: 203 (table diameter) x 152 (Z-coordinate) mm;
• Minimum layer height: 50 microns;
• Maximum layer height: 400 microns;
• Number of extruders: 1;
• 3D printing speed: 40 mm/s;
• Open Source: no;
• Compatible with materials from other manufacturers: yes;
• Heated table: no;
• Nozzle diameter: 1. 75 mm;
• Control panel on 3D printer: no; nine0346
• Connection: USB, WiFi, SD card.

Back to 3D printer list

FlashForge Creator Pro ($899)

You've probably heard of this 3D printer. FlashForge Creator Pro is very similar to Makerbot Replicator 2X. This inexpensive 3D printer has 2 extruders, it has a steel closed body.

Other features include a table sizing system, and a guide screw that makes the guide system more stable and durable. The design is nothing special, but this model has earned positive reviews from the 3D community due to its reliability, versatility and ease of use. nine0005

Specifications of cheap 3D printer FlashForge Creator Pro

• Printer type: FDM;
• 3D printing materials: ABS, PLA, exotic;
• Working space: 225 x 145 x 150 mm;
• Minimum layer height: 100 microns;
• Maximum layer height: 500 microns;
• Number of extruders: 2;
• XY accuracy: 11 microns;
• 3D printing speed: 40-100 mm/s;
• Open Source: design and software; nine0346
• Compatible with materials from other manufacturers: yes;
• Heated table: yes;
• Nozzle diameter: 1. 75 mm;
• Control panel on 3D printer: yes;
• Connection: USB, SD card.

Back to 3D Printer List

Dremel Idea Builder ($899)

The Idea Builder is plug and play. This 3D printer is designed by Dremel. It has a color touch screen display. Sufficiently large working space - 230 x 150 x 140 mm. Unfortunately, the table is not heated. On the other hand, since only PLA plastics can be used, this model is great for classrooms and teaching labs. nine0005

Specifications of cheap 3D printer Dremel Idea Builder

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 230 x 150 x 140 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• Open Source: no;
• Compatible with materials from other manufacturers: no;
• Heated table: no;
• Nozzle diameter: 1.75 mm;
• Control panel on 3D printer: yes; nine0346
• Connection: USB, SD card.

Back to the list of 3D printers

Printrbot Simple Pro ($999)

Printrbot Simple Pro is a significant upgrade from the original Simple. Same open design, no body. Like its predecessor, the Printrbot Simple Pro is compact and portable. All-metal construction for excellent vibration damping and shock resistance.

The main difference is the built-in color touch screen, the ability to connect via WiFi and free cloud service (optional), which greatly improves the 3D printing process. Simple Pro has a 32-bit processor, which ensures smooth and fast movements. And at the same time, this model is included in our top 20 cheap 3D printers, since its cost is $999.

Specifications of cheap 3D printer Printrbot Simple Pro

• Printer type: FDM;
• 3D printing materials: PLA;
• Working space: 200 x 150 x 200 mm;
• Minimum layer height: 50 microns;
• Number of extruders: 1;
• Open Source: design and software;
• Compatible with materials from other manufacturers: yes;
• Heated table: optional;
• Nozzle diameter: 1. 75 mm; nine0346
• Control panel on 3D printer: yes;
• Connection: USB, WiFi.

Back to 3D printer list

Prusa i3 Mk2 ($999)

This is one of the best 3D printers you can buy in this price range. All nodes are open-source licensed and part of the Rep-Rap project, so there are many copies around ... but all replicas are worse than the original.

The Prusa i3 Mk2 is equipped with a heated table that has technology to compensate for temperature differences in the center and corners. There is an automatic calibration system. And of course, amazing documentation. This is an extremely versatile 3D printer that you will 100% appreciate when you start printing with unusual materials such as PLA, PET, HIPS, Flex PP or Ninjaflex, etc. nine0005

The Prusa i3 Mk2 is a 3D printer that is constantly being developed and supported by the manufacturer. Its developer Josef Prusa regularly adds new features, software and design improvements (for example, the ability to color 3D print). If you look for quality competitors in the 3D printing market, then the cost of their equipment will be in the region of $2000 - $3000.

The only drawback is that if you decide to buy a Prusa i3 Mk2, you will have to wait about 2 months, as the company cannot keep up with the high demand. nine0005

Specifications of cheap 3D printer Prusa i3 Mk2

• Printer type: FDM;
• 3D printing materials: ABS, PLA, exotic;
• Working space: 250 x 210 x 200 mm;
• Minimum layer height: 100 microns;
• Number of extruders: 1;
• 3D printing speed: 50 mm/s;
• Open Source: design and software;
• Compatible with materials from other manufacturers: yes;
• Heated table: yes; nine0346
• Nozzle diameter: 1.75 mm;
• Control panel on 3D printer: yes;
• Connection: SD card.

The cheapest 3D printer WINBO Super Helper in Ukraine

Description

Cheap 3D printer

A functional novelty from WINBO can be safely given the title of "cheapest 3D printer". Devices of the new line are available in three versions and are called Super Helper. These 3D printers offer pretty good print quality for little money. Moreover, in some areas, such a cheap 3D printer compares favorably with more expensive competitors. nine0005

As already mentioned, the WINBO Super Helper 3D printer is available in three versions that differ from each other in functionality and construction area:

• Super Helper Sh205 3D Printer - the basic model for 3D printing;
• Super Helper Sh205L 3 in 1 - differs from the first model with a built-in laser for cutting and engraving;
• Super Helper Sh255L 3 in 1 - a modification of the previous 3D printer, equipped with a larger build area (155x155x205 mm). nine0346

The cheapest 3D printer will delight users with good print quality - from 40 to 250 microns, which is enough even for demanding 3D printers. The average speed of the device is 50 - 100 mm / s. This is enough for high-quality printing at home, in the office, in mini-production, in schools and studios. A nice feature of the two older models is laser cutting and engraving, which expands the possibilities of using the printer.

Buy the cheapest 3D printer

If you are looking for where to buy the cheapest 3D printer and choose the right model - by all means pay attention to WINBO devices! This is the best budget option, equipped with a wide range of useful features. Most of them are listed below:

• Multifunctionality (3 in 1). 3D printing + laser cutting + laser engraving;
• Unique material feed system;
• More consistent print quality;
nine0345 Extruder positioning accuracy and print speed;
• Uniform material feed;
• Independent dual cooling system;
• Unique detachable work platform;
• Special platform for printing with flexible materials;
• Convenient system for loading material into the printer;
• Ergonomic and comfortable to use;
• 3.2" LCD;
• System interface in English. nine0346

Specifications

	Super Helper WB-Sh205	Super Helper WB-Sh205L	Super Helper WB-Sh255L
Approval	50 micron	50 micron	50 micron
Construction area size	105x105x155 mm	105x105x155 mm
Print speed	50 – 100 mm/s	50 – 100 mm/s	50 – 100 mm/s
Heated platform	No	No	No
Enclosed case	No	No	No
Software	All available	All available	All available
Weight	3. Learn more 3D printer timelapse Simple 3d printing ideas 3D printer ups power Is 3d printing pla toxic Space hulk 3d print Vader metal 3d printer Lung 3d printing Snap fit 3d print Motherboard for 3d printer 3D scanners for reverse engineering 3D digital laser scanner