Home » Misc » 3D printer 500x500

3D printer 500x500


The 500 x 500 x 500 mm 3D Printer Buyer's Guide (Under $1,000)

Ever wanted to make that large print, but found yourself put off because of all the parts that will need assembling after? With a 500 x 500 x 500 mm 3D printer, the build area is large enough to send your imagination into overdrive and opens up tons of possibilities.

We’ve selected the best 500x500x500mm 3D printers for every budget, but first, let’s consider the advantages of going big.

What does 500x500x500mm 3D printer mean?

The 500x500x500mm simply means that the build volume of the 3D printer is 500 x 500 x 500 mm. That is, each axis — X, Y, and Z — all have a maximum 500mm cubed build area.

Most 3D printers have substantially smaller build areas than this, especially home desktop printers. This is because it can be more difficult to maintain accuracy with larger build areas due to the complexity and size that the gantry systems need to encompass such wide areas, and as you get less compact, vibrations and other factors can reduce print quality as strength and stability declines.

For generally larger printers, we also have a buyer’s guide for large 3D printers

3DSourced is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Despite this, there are a number of reasons why you’d want to buy a printer:

Why Buy a 500 x 500 x 500 mm 3D Printer?

Frees Up Time

When printing and project, you are at the mercy of the print time. Not just the print time, but the time spent setting up the printer for each print, selecting your model and print settings. Maybe you’ve been commissioned to make a large comic book character bust?

Being able to print the entire project in one print is a massive bonus. Larger 3D printers can be left to finish the project without interruption, freeing up more time.

Print large pieces at once, or have fewer pieces to assemble

Being able to print larger parts greatly reduces any post-processing you need to do. If you’re stuck with a smaller 3D printer and need to glue many pieces together to form your larger model, these welded are weak points that can break easily.

For example, cosplay enthusiasts seeking to wow fellow convention-goers who 3D print entire cosplay outfits or armor can print their dream outfit in fewer parts on a 3D printer 500x500x500mm large.

We took a deeper dive into cosplay 3D printing, check out our recommendations here

Huge models just look more impressive, and a 500 x 500 x 500 mm build volume means you can make a full-size stormtrooper helmet, or similar-sized prints, without the need to assemble multiple parts.

Printing a whole batch at once

A batch of hobby pieces can be tricky with a small print bed. Having to reprint a series is time-consuming. With a large print bed you can print all these pieces at once because they all fit within the print bed’s area.

Print Speed

You could be forgiven for wondering if large 3D printers take longer to print, but with the right hardware, this isn’t the case. Investing in a larger nozzle will greatly affect how quickly a large printer can finish a project.

This, and taller layer heights can quicken the process — but you need to decide if you’re comfortable with the quality trade-off.

The Best 500 x 500 x 500 mm 3D Printers

With something to suit every budget, we have scoured the market for the best models that can take on larger projects. We list printers with exact 500 x 500 x 500 mm printing dimensions, as well as some that come close, but are also great options if you don’t need exactly 500mm³ dimensions.

Starting with one of the most popular in the world of 3D printing:

Creality CR-10 S5 – Best Under $1,000

  • Price: $719 — Available on Creality Store here / Available on Amazon here

So big it will need a dedicated space, the sheer size of the Creality CR-10 S5 will get the creative juices flowing.

Larger projects mean more filament, so strength is key. The build plate rests over two rails and boasts powerful motors that make it feel sturdier than the smaller CR-10 (and its smaller 300 x 300 x 400 mm build volume). These rails retain print quality, but also reduce noise so those day-long prints are less likely to disturb the rest of the house.

A generally considered downside to purchasing a larger 3D printer is that assembly can take longer. However, this isn’t such an issue with the CR10 S5. It comes in only a few sections that are easy to assemble, with clear instructions and clearly labeled wires. All in all, you’ll only need around 10 minutes to get it up and running.

The hot end can take on a multitude of filaments including ABS, PLA, TPU, wood, carbon, and copper. This means you can easily switch between printing projects like a large-scale anime character, and a carbon fiber model airplane. 

It requires a little patience as the printing bed takes a little longer to heat up. The CR10 S5 needs around 30 minutes to get to 80C, but this is understandable given the size of the printer.

It also boasts a lot of the common features you want with any 3D printer for general quality of life improvements. These include a print resume function in case there is a power cut, and a filament detector that pauses the print when you’ve run out, so you can resume after replacing your filament without ruining your print.

Some neat added extras include a mini SD card and USB which is where you will find the instructions and test models to get you started. All in all, this is an excellent 3D printer 500x500x500mm by any standards, especially given the attractive price point. 

Multoo MT2X – Another great 500x500x500mm build area 3D printer

  • Price: $1,299

The Multoo MT2X is a versatile 500 x 500 x 500 mm 3D printer with automatic leveling. This will be an advantage as adjusting the print bed between every project can be tricky, especially with large-scale prints.

We also have a ranking of the best auto-leveling 3D printers

You can also upgrade it to function as a laser engraver, for just $50 extra, and is a great feature that you don’t always get with 3D printers. With this you can engrave a design onto a leather belt, personalize a wooden coaster, or make a huge range of other projects. 

Even more impressive is the fact that the Z-axis can be adjusted to reach 800mm — if 500mm doesn’t satisfy you, it can get even bigger! Those full-size models are going to need more room after all.  

The auto-resume feature picks up where you left the project in the event of a power cut, and its dual extruder means it can be used for single, dual, and parallel printing. This makes it possible to print up to 5 objects in one sitting, reducing the time spent managing projects.

We also have a ranking of the best dual extruder 3D printers

Because large projects can be time-consuming (we’re looking at you, full-size figurines), efficiency is a priority. Dual extruders allow the Multoo MT2X to print parallel projects at the same time. It also opens up the opportunity to print two colors, or different materials at the same time.

The 5mm thick glass of the heat plate makes it stable. This also helps to keep the print warmer, reducing warping and ensuring the project can get off the ground in no time.

Not quite 500x500x500mm 3D printers, but alternatives with similar build area

Anycubic Chiron – Affordable Alternative

  • Price: $439 — Available on Anycubic Store here / Available on Amazon here
  • Build volume: 400 x 400 x 450 mm

Although this is not strictly a 500 x 500 x 500 mm 3D printer, we have included it as a budget-friendly option that still has a large build area.

At 400 x 400 x 450 mm, there is still plenty of room to take on larger projects; it is an affordable option that has seen more people get into 3D printing. The sacrifice is in the manual leveling, but working out the settings is made easy by the strong community support. This is a popular 3D printer after all.

The Ultrabase Pro print bed offers great adhesion, and also makes prying the finished print off the platform easy once the model has had time to cool.

The high-quality extruder makes printing trickier filaments like TPU a breeze, extrudes more smoothly, and reduces the likelihood of that hundred-hour print going wrong.

There are plenty of neat features that stand out for a model at this price. They include a full-color touch display, a filament sensor that alerts you if anything has gone wrong or it has run out, and a print speed that ranges from 20 to 100 mm/s a second.

Assembly should take between 30 to 60 minutes which only means one thing – there is more time to spend on the fun part – printing.

Shop the Best Large Format 3D Printers in 2022 (Including Best Large 500mm 3D Printer)

Welcome to the Thomas guide to the best large format 3D printer 2022. Thomas has been connecting North American industrial buyers and suppliers for more than 120 years. When you purchase products through our independent recommendations, we may earn an affiliate commission.

Printing larger items with most at-home or small-scale 3D printers is possible but consists of separately printing different parts of the project and then connecting them all together afterward to make the much larger finished product. In this way, many 3D printing enthusiasts, such as cosplayers, for instance, are able to get past the 3D printing size limitations and use their machines for much larger products than the print bed will allow.

A large-format 3D printer in action

Image credit: Shutterstock/asharkyu

However, purchasing a large-format 3D printer can provide an increase in opportunities for creativity and a decrease in the amount of "putting together" necessary for those larger projects.

Large-Format 3D Printer—Buying Guide

With the average printing bed size of a 3D printer intended for general use being around 150–300mm, if you wanted to scale up the size of your 3D creations, a printer of 350mm–500mm would be ideal, and luckily, there are a few worthy large-scale models available on the market for you to choose from.

Benefits of a Large 3D Printer

Development in 3D printing technology means that we've recently been presented with 3D printed houses, cars, bikes, camper vans, life-size statues, and even sofas and other pieces of furniture.

Obviously, the "large format" we're referring to in this article is less about making grand-scale structures, and more about moving on from miniatures, ornaments, and other small objects or parts that an ordinary, non-industrial-sized 3D printer can produce.

Since you'll have a little more print bed area to play with, with a large-format 3D printer you can create detailed products that don't require a magnifying glass to really appreciate and also larger parts that would otherwise need to be printed in separate sections. 

Thomas’ Top Picks for the Best Large Format 3D Printer 2022

If you're ready to step up your 3D printing game, and have a blast doing it, here are some of the best large format 3D printers currently available to buy now.

Best Large 500mm 3D Printer: Creality CR-10 S5 Plus 3D Printer | Buy Now

Best Large 400mm 3D Printer: ANYCUBIC Chiron 3D Printer | Buy Now

Best Large 3D Printer Under $1000: Creality Ender 5 Plus 3D Printer | Buy Now

Best Industrial Large 3D Printer: Snapmaker 2. 0 Modular 3-in-1 3D Printer | Buy Now

Best Large 3D Printer under $500: SUNLU S8 3D Printer | Buy Now

Best Cheap Large 3D Printer: LONGER LK1 3D Printer | Buy Now

Scroll down to see more on our top picks for the best large format 3D printer, according to many happy buyers.

*Prices listed in this article were as shown in US$ on Amazon.com (USA) and other online retailers as of February 2022

1. Best Large 500mm 3D Printer—Crealty Large 3D Printer 500x500x500mm

As one of the 3D printers with the largest printing beds currently available, the Creality CR-10 S5 3D printer has 500x500x500mm of printing space meaning you can really let your imagination run wild.

Installation is super quick and easy as the machine comes in three pre-assembled parts with clearly labeled wires and instructions. Other features include a resume-printing function in the event of loss of power, and you also get a one-year warranty from the manufacturer.

One buyer who gave this machine five stars helpfully mentioned that you need to have plenty of room to accommodate this huge printer, writing, "The main thing to consider is its sheer size. It requires over a yard, possibly a full meter of depth to move the build plate."

BUY NOW: US$719, Creality 3D

2. Best Large 400mm 3D Printer—ANYCUBIC 3D Printer 400x400x450mm

A large-format 3D printer from a trusted brand, the ANYCUBIC Chiron is for anyone who doesn't mind spending some extra time and effort on leveling the bed or working out the settings.

Users have reported this as being rather tricky, but the trade-off is a great 400mm 3D printer with impressive capabilities, plus, a superb customer service department that helped with any and all issues pertaining to the printer, from setup to product completion. One fan wrote, "It took me a long time to dial in my settings and get high-quality prints but I was able to get the printer working and printing decent quality the same day I put it together. "

Another happy user who has "completed more than 4,000 hours of printing" and "used many hundreds of rolls of filament," described, "The results I am getting are amazing even with some prints taking over 300 hours to complete. In fact, I have just started a seven-part 700-hour print which is going very well."

BUY NOW: US$623.75, Amazon

3. Best Large 3D Printer Under $1000—Creality Ender 5 Plus 3D Printer 350x350x400mm

With pretty much the same capabilities as its equally highly-rated sister model, the Creality Ender 5 Pro, including an automatic bed leveling sensor, bed stabilizer, color touch screen, and easy assembly, the Ender 5 Plus has one major difference; its huge size which accommodates its large build plate.

This sturdy thing works straight out of the box, and in addition to great customer support, there is also a massive Creality community to quickly get any answers and assistance you may require.

"I have printed several large helmets with great results," one happy purchaser wrote, and another added, "I love having the bigger print bed for very big projects. There is some fine-tuning you will have to do but after that, you are ready to rock and roll."

BUY NOW: US$599 (Was US$649), Amazon

4. Best Industrial Large 3D Printer—Snapmaker 3-in-1 3D Printer 320x350x330mm

For advanced hobbyists or pros who want to up their 3D printing game, the Snapmaker 2.0 will make a proud addition to your workspace and open up a world of 3D opportunity and creativity. In addition to its large printing capacity, it is fast, powerful, and also allows you to do much more than 3D printing, like engraving, cutting, and CNC carving.

At this price, it's a unit for those who are pretty serious about 3D printing, but for small businesses that rely on the craft, it will end up paying for itself in no time. One reviewer who bought this to enhance their graphic design business, wrote, "It's been a valuable asset so far. We are making our own business cards on metal which is super unique and our customers love the added services we can now offer."

Another happy buyer who raved about its versatility and build quality, added, "I have been making non-stop with this machine... [It] allows for the imagination to go absolutely wild with ideas!"

BUY NOW: US$1,799, Amazon

5. Best Large 3D Printer under $500—SUNLU S8 3D Printer 310x310x400mm Upgraded

Another good printer with a large print bed, and a tiny price to boot, the upgraded SUNLO S8 only weighs around 26 pounds so is not as much of a task to move as some of the other large 3D printers.

At under US$300, you get many features like high stability, accurate printing, filament runout detection, a Z-axis dual linear rail, and simple assembly. There's also a resume printing function for power failures.

"This printer provides great value for the cost," one buyer explained. "Not only is the print size large enough to do just about anything you can think of, but at 310x310x400 it is the largest in its price class." Another happy customer wrote, "Awesome printer for the price. Can't beat it. It's open-source so it's super easy to add upgrades if you want. Huge build size."

BUY NOW: US$279.99, Amazon

6. Best Cheap Large 3D Printer—LONGER LK1 3D Printer 300x300x400mm

With an even smaller price tag, the Longer LK1 3D printer is another option for those wanting to dabble in 3D printing but unsure whether to fork out the big bucks just yet.

It provides plenty of features to learn the art, and the customer service is helpful with any questions you may have. The leveling is not the best, but it is easy to assemble and users have been satisfied with the print quality.

"This is an awesome entry-level printer," one satisfied shopper explained. "I was pleasantly surprised, how easy it was to set up. .. If you're looking for bang for your buck and [to] familiarize yourself with 3D printing, then don't go wasting money on expensive printers; this one works great."

BUY NOW: US$270.39, Walmart

The Best Large Format 3D Printer—Summary

With one of the largest printing beds currently available for a non-industrial 3D printer, the Creality CR-10 S5 3D printer (US$719, Creality 3D) provides an impressive 500x500x500mm of printing space. The Anycubic Chiron (US$623.75, Amazon) is another large-format printer with impressive capabilities and has a superb customer service department too.

We hope our review of the best large format 3D printer has been helpful. For more 3D printers and other 3D printing suppliers, including 3D printer filaments suppliers, additive manufacturing suppliers, 3D photographic printing services, and 3D sand printing additive manufacturing, consult our additional guides, or visit the Thomas Supplier Discovery Platform.

Other 3D Printing Articles
  • The Best 3D Printers under $300
  • The Best 3D Printers under $200
  • The Best 3D Printer Under $1000
  • The Best 3D Printer Under $500
  • Top 3D Printing Services Companies in the USA
  • Origins of 3D Printing and Additive Manufacturing
  • Overview of 3D Printing Technologies
  • Top 3D Printing Manufacturers and Suppliers (Publicly Traded and Privately-Owned)
  • Top Suppliers of Additive Manufacturing Consulting Services

Other Best Product Articles

  • The Best Cordless Impact Wrenches 
  • The Best Portable Generators 
  • The Best Portable Band Saws
  • The Best Electric Space Heaters 
  • The Best Mini Milling Machine 
  • The Best Attic Ladders
  • The Best Air Purifiers for Smoke
  • The Best Circuit Breaker Locator 
  • The Best Engine Hoists and Accessories 
  • The Best Drywall Lifts 
  • The Best Whole-House Generators 
  • The Best Home Automation Systems 
  • The Best Quietest Portable Generators 
  • The Best Uninterruptible Power Supply Systems 
  • The Best Commercial Patio Heaters 
  • The Best Electric Bikes
  • The Best Electric Pressure Washers
  • The Best Keyless Door Locks
  • The Best Electric Lawnmowers
  • The Best Electric Hand Warmers 

More from Custom Manufacturing & Fabricating

3D printer Creality3D cr - 10s5 DIY kit 500 x 500 x 500 mm

Share to:

  • Description
  • Reviews (4)
  • Delivery and payment
  • Bulk request

Creality3D cr - 10s5 Youtube video reviews

Descriptions of Creality3D cr - 10s5 nine0015

Disclaimer:

● Before assembling or operating the 3D printer, carefully read and follow the operating instructions.

● Modification and customization of the 3D printer is strictly prohibited. We are not responsible for any problems resulting from the changes.

● Always use the correct AC voltage for your region.

● Do not place the 3D printer near flammable/combustible materials or any heat source. nine0003

● Only use the 3D printer in a place with good ventilation. Keep a safe distance from the printer.

Highlights:

● Superb print scale 500 x 500 x 500 mm, outstanding building volume

● Printer comes pre-assembled to solve transportation problem, extra 10 minutes required to fully assemble the kit

● All-in-one controller module (AIO), equipped with separate controls and mechanical structures, expands your imagination and scales up the printer (can be expanded to larger sizes with appropriate upgrade kits such as 400 x 400 x 400mm or 500 x 500 x 500mm)

● Patented technology: Delrin solid V wheels with unique V direction, less noise and better performance than other machines on the market.

● Industrial PCBs can continuously print for 200 hours without error, stable performance is guaranteed by our state-of-the-art technology

● Detailed upgrades: Hot-swap plugs for aviation industry, hand-clamp nuts for thermal layer alignment

Specification

  • All (4)
  • Photo (0)
  • Video (0)
  • Sort by: All

    All Popularity Most Helpful Most Recent

  • English translation

  • tonecue

    Yes (one) nine0003

    3d Grand Format des pieces de tres grosse taille.
    Attention toutefois, le plateau ne chauffe que 300x300mm, les bords sont tiedent et pas chaud.

    Oct 26,2018

  • Sami AGINA (one) nine0003

    A Good Printer

    Bought this Printer for my brother.
    Results are very satisfying considering the price of this printer.
    Might seem like an amateurish piece of equipment but that is far from the truth.
    Works wonderfully. Quasi professional in fact. Yes (one)

    Amazing machine for the price. nine0091

    Nov 16.2018

  • Miguel

    Yes (0)

    Creality cr-10 s5

    Schöner grßer Bauraum und leise. Kann ich nur empfehlen!

    May 01,2019

Want to wholesale Creality3D cr-10s5 ? Please send your bulk inquiry to Creality3D cr - 10s5 below. Please note that we usually don't provide free shipping on Creality3D cr - 10s5 bulk orders, but the wholesale price will be a big deal. nine0003

Your target price:

Ordered quantity:

Country

Your name:

Your phone:

Your email address:

Company name:

Detailed information about Request:

Your recently viewed goods

Pre-Sales Support

Answers to printer building questions

Questions about building your own printer. nine0003

Questions about building your own printer from scratch, from a commercially available kit, or modifications to printer parts.

  • What hotend designs are available in paired solid metal and PTFE lined versions? I know that the E3D V6 hot end exists in both a full metal V6 version and a PTFE lined Lite6 version with the same mount and form factor. What other hotend projects are available…
  • Ender 3 V2 9 error message0185 I bought an Ender 3 V2 printer and successfully printed it with PLA and PLA+. Ender 3 V2 is rated at <= 250°C, but when I set the temperature above 200°C to print in PLA+, I get the message. ..
  • Which stepper motor to use in the heated chamber about 90 °C and an assembly area of ​​200x200x200 mm. I have never built a CoreXY system, so currently my design is…
  • Leadscrew orientation Wouldn't it be better to mount the leadscrews with the motor at the top and free bottom end? Compared to the conventional way (motor down), the lead screw will be under constant voltage,…
  • How to connect z-axis motors in parallel on Prusa i3? The wiring diagram for the i3 has a small circuit board or breadboard or something. And it is mentioned that z-axis motors should be connected in parallel, but beyond that they don't give…
  • 2D printer (standard paper printer) that prints forever? Posted here because I couldn't find the 2D printing or printing category. My question is this: Is there a printer that can print on plain A4 paper without using...
  • Advantages of GT2 over Stand Many 3D printers use the GT2 strip for the y-axis plate and the print head in the x-axis carriage. However, there seem to be obvious disadvantages: stretching (and…
  • Prusa i3 Z-axis only goes down (even when commanded up) I just finished building Tronxy P802M Prusa i3. When I try to move the Z axis using the hardware buttons in the LCD menu (without connecting a computer), it only goes down if…
  • ABS or PLA for structural printed parts? TL;DR Is ABS a better material for 3D printer structural parts than PLA? I searched on eBay for various suppliers of printed parts for the Wilson II. One…
  • Do I need to replace the SMD fuses in RAMPS 1.5 and larger for 24 volt use? One of the main hacks for converting RAMPS 1.4 board to use with 24V, as specified in RAMPS 24V , replacing polyfuses, mainly F2 (MF-R1100 manufacturing company), with wire and with…
  • Looking for files for printed parts for my Kossel XL kit from Builda3Dprinter.eu A couple of years ago I got a Kossel XL kit from builda3dprinter. eu as a gift, but I stopped building it because a few parts were missing, including printed ones. Now that I'm building...
  • What do you call the Z axis mechanism in a Cartesian 3D printer? What do you call the mechanism that allows linear movement along the Z-axis in a Cartesian 3D printer? I know what the individual parts are; it's a lead screw, a smooth shaft... but what to call it...
  • Thermal Runaway E1 I'm currently building a Hypercube Evolution from the kit I was given. It uses BIQU KFB2.0 remote controller and 24V power supply. I have no experience in 3D printing. I…
  • Which kinematic system is of the highest quality? I am going to design and build a 3D printer. I want the highest quality and precision, so nothing but what's important to me. Which Cartesian design has the highest quality and...
  • Springs for tensioning V rollers? I've just been troubleshooting the V-rollers on my Ender 3 and have started to test the installation of the eccentric nut. It's hard to get the perfect tension without over-tensioning...
  • Lead selection for lead screw This video brought my attention to Ender 3's 8mm Z axis screw lead, which seems to be an extremely poor choice in terms of accuracy with respect to common mesh alignments in…
  • 3D printers from China - avoidance asbestos exposure Many 3D printers are made in China, and asbestos is still legal in China (with a lot of ongoing production, it seems). Thus, it is quite possible to get a 3D printer with…
  • What are the respective gear ratio ranges for 1.75 mm and 3 mm filament extruders? Most 3mm (mostly 2.85mm actually) filament extruders have some sort of gear reduction. Many 1.75mm extruders are direct drive/non-engagement, but…
  • Will using a 1mm or 2mm lead screw instead of 8mm lead to a better printer? By "better" I mean "more accurate"... As for the RepRap P3Steel or Wilson II, I get about 330mm of T8 lead screws for z movement. Apparently, there is a choice between lead…
  • Printer Controller Upgrade I bought a (very) low end printer some time ago and am about to start upgrading it. First on my list is the controller update 1) . My original plan…
  • Using an Anet A6 3D printer in the UK… (mains voltage problem!) I realize this is probably more of an electronics issue, but was hoping someone with experience using the Anet A6 in the UK (or a country outside the US/China) may be able to help...…
  • What are the compromises in console printer design? There are some console type printers like some DIYs (2018), TronXY-X1, Monoprice Select Mini, Cetus Tiertime line and Prusa Mini 2019 links for info, no…
  • Herringbone timing belt? While playing around with the 3D printed gears, I realized that it would be easy to make a 3D printed herringbone timing belt and matching gears/pulleys. Would such a design have any advantages. ..
  • Anet A6 assembly problem - remaining power cables do not follow instructions I just built an A6 and connected all cables except the last power cables. The motherboard says heated table line and extruder line, but the cable says it's heating.… it will turn off and there will be a loud clicking sound, decreasing slightly (under the heat table, but out of the way). Are there any…
  • Lead screw holder - should I buy the metal one or just use the printed one? I'm on my way to build my own printer using 2020 profiles, TR8*500mm lead screw for z-axis. Still wondering if it will be h-bot or CoreXY, but that's another one...
  • Why not use GT2 instead of Z threaded rod or lead screw? Having just re-read Tom's excellent answer to my question about the advantages of GT2 over a rack, my comment reflects 1: Why is a threaded rod or lead screw used for…
  • Lead screws M8 instead of M5? I'm building a Prusa i3 MK2S (cart). I'm having a really hard time finding M5 rods for the Z axis, I have an M8 screw with an 8mm lead, so I thought since M8 is widely available on the internet, I might just… in 3d printing and I have a question that is probably stupid. I put together a 3D printer kit some time ago, but now I need a big printer to play with. I would like…
  • Printer goes off the platen on auto leveling I'm trying to add auto leveling to my Prusa i3. When I run G28 , my printer stops properly at the X and Y ends, then it takes position X=25, Y=99 on the table and...
  • Does this reconfiguration controller really support 24V? I would like to set up 24V (3D printer board and screen) as opposed to the usual 12V and for this I was considering using a Taurino power board or an Eruduino clone. However, I just…
  • Is it problematic to have 4 adjustment points for table leveling instead of 3? My Ender 3, and I think many printers, have 4 table leveling fixtures, one in each corner. It seems to me that having 4 points creates an overly deterministic…
  • How to build a cheap (but safe) laser engraver with spare parts I'd like to start a small engraving business without having to buy expensive equipment. Using junk parts at home or parts from broken CD players, is there any…
  • Is it a good idea to include thermal fuses in a DIY 3D printer design? 3D printing should be relatively safe, but the inherent nature of 3D printers with all the hot parts present a fire hazard. A well-designed 3D printer should be…
  • 3D printer setup I'm not very used to 3D printers and just bought my first 3D printer today (Creality3D Ender 3). But I can't collect it. The 3D printer does not come with instructions on how to build it, what do I…
  • Can I repurpose most of the components of this Delta Prusa clone? I have a generic Prusa clone that I don't use (my main problem with it is the lack of rigidity of the frame body as it was built). Will they fit...
  • Why do 3D printers only have one limit switch? I've seen many 3D printers only have one limit switch for each axis, how does it know where to stop at the other end? My first guess is that the machine knows...
  • Carbon fiber instead of smooth steel bars? I have a long 8mm smooth steel rod about 55cm long. These rods bend easily due to the length. If I replace them with 8mm hard carbon rods...
  • Building a 3D Printer Building a 3D printer is obviously a huge undertaking. Does anyone know of any reasonably cheap guides for building my own 3D printer?
  • HDPE as a 3D printer case? I've been working on my own DIY 3D printer recently and have been trying to experiment a bit with different case materials. Someone suggested using HDPE (High Polyethylene)
  • Building a cheap 3D printer with DC motors? Since I don't have a 3D printer, I'm looking for a way to build an affordable 3D printer. But paying 200 euros for one seems too much many. So in my search for an affordable 3d printer, I decided...
  • 3D printer doesn't work on regular printer (HP PSC 1315) I thought it was a fun project to make my own 3D printer from regular printer parts + some parts from old CD-ROMs that are lying around. The printer of my choice is HP…
  • What parts are required for a 3D printer? I designed the mechanics of my 3D printer myself because I need to print parts that are really huge (and for budget reasons). So, I already have a 3D - move function. … nine0186
  • Advantages/disadvantages of using synchromesh cables instead of belts? Some 3d printers use synchromesh cables instead of straps. For example, Deezmaker Bukito (http://bukito3d.com/) and a number of RepRap transformations. Photo from http://christophergranz.com/?p=449 …
  • Recommend a good book about 3D printers? I've been interested in 3D printing for the past month, however I've noticed that it's kind of a "reserved" topic. This means that everyone who talks about it already has some basic…
  • Ball screw: Maintaining the Z-axis position when the motor is off I am building a 3D printer measuring 500 x 500 x 500 square meters. For the Z axis, I plan to use this linear actuator. The maximum weight that the Z axis can face is 15kg…
  • Sunhokey Prusa i3 x, y, z axes? My Sunhokey Prusa i3 arrived with a damaged disk. I'm waiting for a new one and finished the mechanical assembly with the help of a YouTube video. I have no idea which motor controls the X, Y and Z axes. I don't even…
  • Adding backup power from battery So obviously the wiring in my house is... dubious. Very rarely, plugging in or disconnecting from the mains will result in a power outage. This is almost always the result of the fan turning on...
  • Folgertech FT-5 doesn't seem to read G-code correctly I recently bought an FT-5 from Folgertech and finished building about a week ago.

    Learn more