Home » Misc » Blue filament for 3d printer

Blue filament for 3d printer


Pearl Blue PLA filament 1kg

Parameters

  • Made for Prusa
  • Pearl Blue
  • Silk

DescriptionPrinting SetupReviewsDownloads

Is it for me?

PLA is the most commonly used filament. It’s easy to print, and a very strong material. The perfect choice for printing large objects thanks to its low thermal expansion (little to no warping) and for printing tiny parts because of its low melting temperature. Only this material is proven for 50 microns layer height.

PLA has a relatively low melting temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s also very hard material, but that also means it’s somewhat brittle, and once it breaks, it likes to shatter.

However, PLA is not a perfect material and, just like every other plastic, has some disadvantages. The low melting temperature also means low-temperature resistance. Parts start to lose mechanical strength at temperatures over 60 °C.

The combination of having low-temperature resistance and low UV-resistance means that it’s not ideal for outdoor use. Also, PLA is only soluble in chemicals like chloroform or hot benzene. So when connecting multiple pieces, you’re better off using just glue.

Even though PLA is on its own food safe, we do not suggest to repeatedly drink or eat from your 3D prints. Because of the small fractures on the print surface, bacteria can build up in there over time. You can prevent this by applying a food-safe coating. When post-processing PLA, it’s better to use wet sanding. Without water you'll quickly start heating the plastic by friction, it will melt locally and make it hard to keep sanding.

Printing Setup

Nozzle 215 °C
Heatbed 50-60 °C

Basic Attributes

Easy to print Brittle
Can print tiny parts Low temperature resistance
Can print huge objects Difficult post-processing
Hard and tough    
Low warping    

Notes

This PLA is proudly made in the Czech Republic.

1.75 mm filament is manufactured with precision of +- 0.05 mm

We reserve the right to ship weights +/- 5% due to packaging variations.

Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.

Reviews

Log in to add a review

This filament is flawless printed with my Prusa mks3+ and I am very happy with it, in my opinion you could lower the price a bit maybe it is a bit too expensive since it is not a prusament filament

For me this PLA worked Perfect. No stringing, no knots. Used it for a Chess set which Looks awesome. Also a Little translucent but Not to much.

Unfortunately, my experience with this filament has not lived up to expectation. It came packaged perfectly, cardboard box with a re-usable bag held in vacuum with the spool and a bag of desiccant. Specs for this filament were decent, lower tolerance than Prusament but also lower cost. The colour is much duller than the photograph (on a calibrated monitor) even when illuminated with daylight white LEDs, but it has an interesting pearly undertone with very small sparkly particles. It looks alright, but not as nice as the photo, much duller shade of blue. Loaded it into my machine, tried my Generic PLA profile which runs with 1.5mm retraction and Linear Advance. This profile works for everything from silks to translucent PLAs well - not flawlessly - but is my base profile so where I always start. Well, the benchy was unusably stringy. Alright, retune linear advance, increase retractions. At double the retraction (3mm) it was still stringy, not as bad but definitely too much for this much retraction. Lowered temp a little bit, increased retraction, and found a usable spot at 4mm retraction (over double my typical) and at the minimum spec temp for this filament. Support were very helpful in trying to figure this one out but in the end returned this and the Red Pearl for store credit. This filament is a white-label Filament PM product and in theory should be of high quality.

Flashforge Blue PLA 3D Printer Filament, 1.75mm, 1kg Spool, compatible with most FDM 3D printers.

Christmas Sale: Up to 60% off !

  • Day

  • :

  • Hrs

  • :

  • Min

  • :

  • Sec

Flashforge Christmas Sale: Up to 60% off! Get an extra Christmas gift when order US$200+.

  • Home

loading

Share the product to

Worry-free warranty

Dedicated support

Fast shipping.Free shipping for items available at USA/UK/AU/EU warehouses.

  • Overview
  • Parameter
  • In the Box

About Flashforge PLA Filament

PLA (Polylactic Acid) filament, a low-cost filament type, is widely used to print prototype parts and products that don't have high demands on hardness and thermostability. Flashforge PLA filament prints at minimum layer thickness with refined details and outstanding quality, suitable for beginners and experts working on simple projects. Properties are as following:

  • RoHS certified;
  • Nozzle temperature requirement: 190-220°C;
  • Build plate temperature requirement: non-essential;
  • Printing speed: 60-90mm/s;
  • Layer height: 0.1~0.2mm;
  • Density: 1.25±0.05g/cm3;
  • Outstanding diameter accuracy +/- 0.02mm;
  • Smoothen filament extrusion;
  • Ultra-pure grade material & strict quality control standards to guarantee print quality;
  • Minimal filament warping, curling, shrinkage, and bubbles during 3d printing process;
  • Compatible with most FDM 3D Printers, perfect for Flashforge Adventurer 3, Finder, and Dreamer series 3D printers.
  • Permits longer storage time without any compromise on filament quality;
                                                       Shipping Notice
 Warehouse  Destination  Delivery Time
 United States  United States  3-8 biz days
 United Kingdom  The UK and most European countries  3-8 biz days
 Australia  Australia  8-15 biz days
 Accessories and some filaments will be shipped separately from the China warehouse.  10-22 biz days

 

Tech Specifications

Spool Diameter 200 mm [7.9 in]
Spool Hub Hole 52 mm [2.1 in]
Spool Width 76 mm [3.0 in]
Filament Diameter 1.75 mm
Shipping Weight 1.5 KG (3.3lbs)
Net Weight 1.0 KG (2.2lbs)

 

 

Comparison between Flashforge PLA, PLA Pro, PLA-CF, ABS, ABS Pro, PETG, PETG Pro, PETG-CF.

Spec & Print Setting PLA PLA Pro PLA-CF10 ABS ABS Pro PETG PETG PRO PETG-CF10
Tensile Strength (MPa) 45-49 45.5-49 40-45  ≥43  ≥53 40-45 35-40 40-43
Flexural Strength (MPa) 69-75 73-76 85-95     50-55 45-50 75-85
Modulus of Elasticity (MPa) 1000-1100 950-1050 1100-1300     1000-1100 1100-1200 2100-2400
Elongation @ Break (%) 13. 5-15.5 14.5-16.5 11.5-13.5  ≥10  ≥20 6.0-8.0 6.0-8.0 7.5-8.5
Heat Deflection Temp (oC) 53 53 60 88℃ 88℃ 74 68 70
Nozzle Temp (℃) 200-220 190-210 200-230 230-250 230-250 240-250 220-240 230-250
Bed Temp (℃) 50-55 50-55 40-50 100-110 100-110 80-90 70-80 60-80
Printable with Glass Plate YES YES ! (with glue stick) ! (with glue stick) ! (with glue stick) YES YES ! (with glue stick)
Printable with PEI Sheet YES YES / ! (with glue stick) ! (with glue stick) YES YES /
Print in Enclosed Chamber / / / YES (recommend) YES (recommend) / / /
Print with Hardened Nozzle / / YES / / / / YES
Dryer Box / / YES / / / / YES

Flashforge Filaments Key Features

Key Features PLA PLA Pro PLA-CF10 ABS ABS Pro PETG PETG PRO PETG-CF10
Filament Type Standard Standard Carbon fiber filament Standard Standard Standard Standard Carbon fiber filament
Food Safe YES YES / / / YES YES /
Low Warping YES YES YES / / YES YES YES
High Tenacity YES YES YES / / YES YES YES
Dissolvable / / / YES YES / / /
Chemical Resistance / / / / / YES YES /

Your questions will be answered by the users who have purchased this product

May not be greater than 255 characters.

Read All Reviews

FAQ

No questions.

Plastic filament for 3D printers ESUN HIPS 3D delivery in Russia

ESUN HIPS — plastic filament for 3D printers 1.75 mm

2 150₽ Select options

2 150₽

ESUN HIPS is an impact resistant plastic filament for 3D printing.

  • Izod impact strength - 11 J/m 2
  • Material density - 1.05 g/cm³
  • Delivery: 2-5 days
  • Diameter 1.75; colors: white, blue, yellow, green, brown, red, natural, orange, pink, green, grey, blue, purple and black
  • Smell: yes
  • Manufacturer: eSUN, China
  • Net weight: 1 kg.

ESUN HIPS is a high impact plastic 3D printing filament and/or support. The applied printing technology is FDM.

  • Description
  • Details
  • Specifications
  • Payment
  • Guarantees nine0016
  • Delivery
  • Reviews 0

3D Printer Filament ESUN HIPS

ESUN HIPS (High Impact Polystyrene) is a high impact polystyrene. Of course, this is a unique material. On the one hand, it can be used as a strong base material for building a product. On the other hand, as a soluble support material (soluble in D-limonene). The material belongs to the group of engineering plastics. nine0003

ESUN HIPS filament properties:

• High bending strength and impact resistance;
• Good for mechanical post-processing;
• Low moisture absorption;
• Soluble with D-limonene;
• Long lasting properties after printing - products are durable.

Delivery options:

• HIPS thread 1.75 mm thick in 1 kg spools;

Benefits of ESUN HIPS 3D Printer Plastic Filament:

  • Limonene dissolves; nine0016
  • Low moisture absorption;
  • High rigidity.
⚠ Attention! As a rule, HIPS material requires the use of special means during printing, to ensure the extraction and protection of the respiratory tract.
ESUN HIPS filament printing specifications:
  • Temp. printing: 220 - 260℃;
  • Temp. substrate: 110℃;
  • Print speed: 30 - 80mm/s.
⚠ Attention! HIPS requires the platform to be heated to 100°C and has reduced adhesion to the platform. Use adhesion promoters. Stable printing on a printer without heating the platform to the specified temperature is not guaranteed! nine0057

Features

Density 1.05 g/cm³3
Izod impact strength 11 J/m2
Thermal deformation temperature 80 °C, 0.45 MPa
Tensile strength 27 MPa
Elongation at break 55%
Flexural strength 39 MPa
Flexural modulus, MPa 2280
Melt flow index 3g/10min(200°C/5kg)
Print speed: 30 - 80mm/s
Purpose engineering, hobby
Diameter 1. 75 and 2.85 mm
Form Hard plastic thread
Odor Must be controlled 9009nine
Net weight 1 kg. or 2.5 kg
The table shows the technical specifications of ESUN HIPS - a plastic filament for 3D printers.

Payment

The Multismol online store provides cash and non-cash payment.

Cash payment is possible only upon delivery of the order by an employee of a courier company in Moscow, Moscow region, St. Petersburg and the region.

In all other cases, we accept non-cash payments through the secure Internet acquiring of PJSC Sberbank. We accept cards of payment systems VISA, Mastercard, MIR, JSB. You can also use SberPay to pay. nine0003

If you want to purchase goods for business, let us know about it and we will issue you an invoice for payment from the current account of a legal entity or individual entrepreneur.

You can get more detailed information about payment in the section - Payment.

Guarantees

The Multismol shop carries out its activities within the framework of the legislation of the Russian Federation.

We guarantee that all goods are purchased legally from manufacturers, we do not distribute illegal goods or fakes. nine0003

We guarantee a refund if the product is out of stock or not delivered. And also, in case of delivery of low-quality goods.

We use the official Internet acquiring of Sberbank PJSC for payment, which guarantees secure payment.

Delivery

We deliver orders in Moscow and the region, in St. Petersburg, in Russia, in countries near and far abroad.

The general conditions for the delivery of orders, as well as specific information on each delivery method, are set out in the Delivery section of the Multismol online store. nine0003

Filament for 3D printer, blue, 50 g, Fischertechnik (FT-539123)

JavaScript seems to be disabled in your browser.
You must enable JavaScript in your browser to use the functionality of this site.

Respect!

Unfortunately, it is not practicable at times.

X

back

nine0247
Art. No.
FT-539123
Brand
Fischertechnik
Age
14+
nine0260
Material
Plastic

Out of stock

299 UAH

Quantity:

Terms of delivery
in Kyiv: 35 UAH.
to the regions: 35 UAH.
Read more

Rate this product

one 2 3 4 five 6 7 eight nine10

Product description

Filament in the form of a thread for a 3D printer from the German manufacturer fischertechnik.

Fischertechnik's special 3D printer filament for high quality and precise print results. You will be able to create models of products, plastic mechanisms and decorative products according to your own projects.

Filament for a 3D printer from the German manufacturer Fischertechnik is a high-quality plastic filament with a stable diameter of 1.75 mm. nine0003

The winding on the bobbin is of high quality and smooth. A special thread made from polylactide, a material known for its environmental friendliness. It is obtained from corn starch or sugar cane.

Main advantages:

  • skein of thread in polyethylene package,
  • color: blue,
  • weight: 50 g,
  • diameter: 1.75mm,
  • does not contain heavy metals.
Type of development
  • Mathematics and Logic
  • Introduction to Science
  • Memory and attention

Features

Art. No. FT-539123
Name Filament for 3D printer, blue, 50g, Fischertechnik (FT-539123)
Brand Fischertechnik
Age 14+
Material Plastic
Warranty 14 days

Leave a review

Popular Products