Z scale 3d printing

Model Railway – Tagged "3D Printed

Outland Models Model Railroad Scenery Classic Pick-up Truck Set w Goods Scale Z

Outland Models Model Railroad Scenery Classic Pick-up Truck Set w Goods Scale Z
Regular price

$1.89

Sale price

$1.89 Sale

Unit price

/per
Western Country Accessory Set Windmill, Water Tower, Shed...1:220 Z Scale Outland Models Railway Scenery

Western Country Accessory Set Windmill, Water Tower, Shed...1:220 Z Scale Outland Models Railway Scenery
Regular price

$1. 99

Sale price

$1.99 Sale

Unit price

/per
Outland Models Model Railroad Vintage Classic City Autos Cars Set 1:220 Scale Z

Outland Models Model Railroad Vintage Classic City Autos Cars Set 1:220 Scale Z
Regular price

$2.84

Sale price

$2.84 Sale

Unit price

/per
Outland Models Model Railroad Scenery Warehouse Accessories Set Scale Z 1:220

Outland Models Model Railroad Scenery Warehouse Accessories Set Scale Z 1:220
Regular price

$2. 84

Sale price

$2.84 Sale

Unit price

/per
Country Farm Tractor Set with Straw Z Scale 1:220 Outland Models Railway Scenery

Country Farm Tractor Set with Straw Z Scale 1:220 Outland Models Railway Scenery
Regular price

$3.79

Sale price

$3.79 Sale

Unit price

/per
Outland Models Model Railroad Layout Modern Car Set Muscle Sedan SUV Van Scale Z

Outland Models Model Railroad Layout Modern Car Set Muscle Sedan SUV Van Scale Z
Regular price

$1. 89

Sale price

$1.89 Sale

Unit price

/per
Outland Models Railway Scenery Country Classic Farming Tractor Set Z Scale 1:220

Outland Models Railway Scenery Country Classic Farming Tractor Set Z Scale 1:220
Regular price

$3.79

Sale price

$3.79 Sale

Unit price

/per
Country Farmer Peasant Figure Set Z Scale 1:220

Country Farmer Peasant Figure Set Z Scale 1:220
Regular price

$2. 99

Sale price

$2.99 Sale

Unit price

/per
Trash Can, Dumpster & Manhole Set Z Scale

Trash Can, Dumpster & Manhole Set Z Scale
Regular price

$1.99

Sale price

$1.99 Sale

Unit price

/per
Train Station Passenger Figurine Set 1:220 Z Scale Outland Models Railway Scenery

Train Station Passenger Figurine Set 1:220 Z Scale Outland Models Railway Scenery
Regular price

$1. 99

Sale price

$1.99 Sale

Unit price

/per
American Frontier Wildlife 1:220 Z Scale

American Frontier Wildlife 1:220 Z Scale
Regular price

$2.99

Sale price

$2.99 Sale

Unit price

/per
Train Station Accessory Set: Phone Booth, Bench, Trash Bin... 1:220 Z Scale Outland Models Railway Scenery

Train Station Accessory Set: Phone Booth, Bench, Trash Bin. .. 1:220 Z Scale Outland Models Railway Scenery
Regular price

$3.99

Sale price

$3.99 Sale

Unit price

/per
Outland Models Model Railroad Industrial Gas / Fuel Tank 1:220 Scale Z

Outland Models Model Railroad Industrial Gas / Fuel Tank 1:220 Scale Z
Regular price

$3.79

Sale price

$3.79 Sale

Unit price

/per
Roadside / Park Accessories Set Bench, Light Pole, Fire Hydrant. .. 1:220 Z Scale Outland Models Scenery

Roadside / Park Accessories Set Bench, Light Pole, Fire Hydrant... 1:220 Z Scale Outland Models Scenery
Regular price

$3.99

Sale price

$3.99 Sale

Unit price

/per
Classic 2-Story City Shop Set of 4 Z Scale 1:220

Classic 2-Story City Shop Set of 4 Z Scale 1:220
Regular price

$5.99

Sale price

$5.99 Sale

Unit price

/per
Outland Models Model Railroad Scenery Modern City Bus and Shed Set 1:220 Scale Z

Outland Models Model Railroad Scenery Modern City Bus and Shed Set 1:220 Scale Z
Regular price

$5. 69

Sale price

$5.69 Sale

Unit price

/per
Outland Models Train Railway Layout Trackside Building Set Z Scale 1:220

Outland Models Train Railway Layout Trackside Building Set Z Scale 1:220
Regular price

$10.44

Sale price

$10.44 Sale

Unit price

/per
School Bus with Kids and Parents Z Scale 1:220

School Bus with Kids and Parents Z Scale 1:220
Regular price

$5. 99

Sale price

$5.99 Sale

Unit price

/per
Heavy Construction Vehicle Set Z Scale 1:220 Outland Models Railway Miniature

Heavy Construction Vehicle Set Z Scale 1:220 Outland Models Railway Miniature
Regular price

$8.54

Sale price

$8.54 Sale

Unit price

/per
Auto Service Shop & Accessories 1:220 Z Scale

Auto Service Shop & Accessories 1:220 Z Scale
Regular price

$7. 99

Sale price

$7.99 Sale

Unit price

/per
Maintenance Worker & Equipment Set 1:220 Z Scale Outland Models Railroad Scenery

Maintenance Worker & Equipment Set 1:220 Z Scale Outland Models Railroad Scenery
Regular price

$4.99

Sale price

$4.99 Sale

Unit price

/per
Overhead Footbridge 1:220 Z Scale Outland Models Railway Scenery

Overhead Footbridge 1:220 Z Scale Outland Models Railway Scenery
Regular price

$9. 99

Sale price

$9.99 Sale

Unit price

/per
Outland Models Model Railroad Scenery Heavy Duty Gas/Fuel Truck Set Z Scale

Outland Models Model Railroad Scenery Heavy Duty Gas/Fuel Truck Set Z Scale
Regular price

$8.54

Sale price

$8.54 Sale

Unit price

/per
Convenience Store & Accessories 1:220 Z Scale

Convenience Store & Accessories 1:220 Z Scale
Regular price

$7. 99

Sale price

$7.99 Sale

Unit price

/per
Outland Models Model Railroad Scenery City Car Taxi 4pcs Scale Z 1:220

Outland Models Model Railroad Scenery City Car Taxi 4pcs Scale Z 1:220
Regular price

$1.89

Sale price

$1.89 Sale

Unit price

/per
Outland Models Model Railroad Scenery Heavy Duty Dump Truck Set w Goods Z Scale

Outland Models Model Railroad Scenery Heavy Duty Dump Truck Set w Goods Z Scale
Regular price

$8. 54

Sale price

$8.54 Sale

Unit price

/per
Country Farm Tool Accessory Set Z Scale 1:220

Country Farm Tool Accessory Set Z Scale 1:220
Regular price

$2.99

Sale price

$2.99 Sale

Unit price

/per
Rooftop Ventilation Air Conditioner Set Z Scale

Rooftop Ventilation Air Conditioner Set Z Scale
Regular price

$2. 99

Sale price

$2.99 Sale

Unit price

/per
Industrial Platform & Stairs Set 1:220 Z Scale Outland Models Railroad Scenery

Industrial Platform & Stairs Set 1:220 Z Scale Outland Models Railroad Scenery
Regular price

$5.99

Sale price

$5.99 Sale

Unit price

/per
Entrance Stairs Set 1:220 Z Scale Outland Models Railroad Scenery

Entrance Stairs Set 1:220 Z Scale Outland Models Railroad Scenery
Regular price

$2. 99

Sale price

$2.99 Sale

Unit price

/per
Outland Models Model Railroad Single Car Garage with Car 1:220 Scale Z

Outland Models Model Railroad Single Car Garage with Car 1:220 Scale Z
Regular price

$3.79

Sale price

$3.79 Sale

Unit price

/per
Outland Models Model Railroad Scenery Parabolic Antenna x2 Scale Z 1:220

Outland Models Model Railroad Scenery Parabolic Antenna x2 Scale Z 1:220
Regular price

$2. 84

Sale price

$2.84 Sale

Unit price

/per
Car Maintenance Crew Figure Set 1:220 Z Scale

Car Maintenance Crew Figure Set 1:220 Z Scale
Regular price

$2.99

Sale price

$2.99 Sale

Unit price

/per
Outland Models Model Railroad Industrial Oilfield Oil Pump Jack 1:220 Scale Z

Outland Models Model Railroad Industrial Oilfield Oil Pump Jack 1:220 Scale Z
Regular price

$5. 69

Sale price

$5.69 Sale

Unit price

/per
Outland Models Model Railroad Double Car Garage with Cars 1:220 Scale Z

Outland Models Model Railroad Double Car Garage with Cars 1:220 Scale Z
Regular price

$5.69

Sale price

$5.69 Sale

Unit price

/per
Rescue Truck Set: Fire/Ambulance/Tow Pickup 1:220

Rescue Truck Set: Fire/Ambulance/Tow Pickup 1:220
Regular price

$6. 99

Sale price

$6.99 Sale

Unit price

/per
Market/Store Interior Accessories Set 1:220 Z Scale

Market/Store Interior Accessories Set 1:220 Z Scale
Regular price

$3.99

Sale price

$3.99 Sale

Unit price

/per
Outdoor Picnic Table Set 1:220 Z Scale

Outdoor Picnic Table Set 1:220 Z Scale
Regular price

$3. 99

Sale price

$3.99 Sale

Unit price

/per
Outland Models Model Railroad Scenery Layout Tall Sector Antenna Scale Z 1:220

Outland Models Model Railroad Scenery Layout Tall Sector Antenna Scale Z 1:220
Regular price

$4.74

Sale price

$4.74 Sale

Unit price

/per
Garage Accessories Set 1:220 Z Scale

Garage Accessories Set 1:220 Z Scale
Regular price

$2. 99

Sale price

$2.99 Sale

Unit price

/per

Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device

▷ z scale buildings 3d models 【 STLFinder 】

bus stop (z scale)

thingiverse

for z scale collection

Z Scale ballast spreader

thingiverse

Z scale ballast spreader. ...

side road (z scale)

thingiverse

for z scale collection

runway ( z scale)

thingiverse

for z scale collection

18 - 3mm scale buildings

thingiverse

This is 18 buildings designed at 3mm scale which is 1" - 50'. ...

N-Scale Futuristic Buildings

pinshape

3 6mm Scale 1:285 Futuristic Buildings that are part of a larger collection of assets that are available right now at https://www.kickstarter.com/projects/steampunkarena/futuristic-urban-n-scale-3d-printable-assets. ...Perfect for your Tabletop games...

3mm Scale Residential Buildings

pinshape

This includes multiple .STL files for 3mm scale homes and a fire station. The house is 15.39mm tall x 16mm x 22.5mm. The victorian house 1 is 18.25mm tall x 21mm x 32.74mm. The victorian house 2 is 16.5mm tall x 15.75mm x 33.5mm. The manor house 1 is. ..

Z scale Bridge system.

pinshape

Bridge z scale for marklin mini club.

Z scale switching tower

prusaprinters

Downscaled to Z scale. ...Very easy to print</p>

windmill & vane Z Scale

thingiverse

This is a basic windmill for Z scale layouts

Z scale Boxcar

thingiverse

A generic boxcar for a z scale layout. ...Just glue the boxcar to its base and add trucks

Z scale refinery boiler

prusaprinters

Downscaled and reinforced so it could be easily printed for Z scale. ...Makes a nice industrial decoration.</p>

Z-Scale Office Building

thingiverse

An office building that stands 60mm tall. ...It is a Z-scale (6mm) model, though you could probably scale it up to 28mm scale if you have a big enough printer.

Water tower (z-scale)

thingiverse

Small water tower (z-scale) Assembling: Paint as you like and glue the parts together. Alternative base can be used if no baseplate/walls is needed. Printing: Print base plate, lower and upper elements with the lower side in the printing bed,...

Street element (z-scale)

thingiverse

Street elements (z-scale) Several elements in several lengths. There are 2 cross-roads elements added to the elements seen in the picture. Published on request by printer000, I would not thought somebody would be interested in this design. ... For...

Z Scale Pallet

thingiverse

Here's a shipping pallet in Z scale (1:220) for a model railroad layout. ...They are so small I had to print them in a group in order to be able to handle them.

Food truck (z-scale)

thingiverse

Food truck (z-scale) 2 versions included, with and without sign on the roof. Assembling: No assembly needed, paint as you like. ... Printing: Print-in-1-piece model of a food truck.

Garbage Truck (z-scale)

thingiverse

Garbage truck (z-scale) Assembling: Paint in the colors you like. Assemble parts as described in the picture. Printing: Use transparent filament for windows insert. Print body of the vehicle with supports on the printing bed, print the...

Food trailer (z-scale)

thingiverse

Food trailer (z-scale) The 3 versions differ in the form of the sign on the roof. Assembling: Paint in the colors you like. Assemble parts as described in the picture. ... Printing: Print body of the vehicle with supports on the printing...

Snow plow (z-scale)

thingiverse

Snow plow vehicle (z-scale) Version 2 has a closed front plate to represent a vehicle without attached snow plow. Assembling: Paint in the colors you like. Assemble parts as described in the picture. Printing: Use transparent filament...

Z Scale Figures, various

thingiverse

Some Z scale figures of my own design. These are right on the ability of my printer to print. If you print these expect print failures. Wrists elbows and ankles are problematic, however you can see that when they do print they are acceptable. Note...

Cottage 1 (z-scale)

thingiverse

Cottage 1 (z-scale) Design inspired by a house in a village nearby. Assembling: Use transparent foil, cut to fit and glued on the inside of the wall elements, as glass in the windows. Be careful not to place the foils in areas where the walls...

Warehouse (z-scale)

thingiverse

Warehouse (z-scale) Assembling: Use transparent foil, cut to fit and glued on the inside of the wall elements, as glass in the windows. Be careful not to place the foils in areas where the walls connect! I use 0,5mm transparent foil, clear or or...

Z-95 Legion Scale

thingiverse

I remixed the Z-95 so that I didn't need to print it all at once, and would fit on my Ender 3. ... Print 2 wings.

3mm scale Industrial Revolution Buildings

pinshape

This includes multiple .STL files for 3mm scale commercial and industrial buildings. The warehouse is 19mm tall x 49.5mm x 24.5mm. The office building is 33.5mm tall x 86.74mm x 31.25mm. The apartment building is 39.75mm tall x 58.5mm x 28.75mm. The. ..

Ancient Buildings in 6mm Scale

thingiverse

Ancient Buildings in 6mm Scale Contains: 6 designs for a stone house 20mm sq. 10mm high. 1 Courtyard building 35mm sq. Large Stone City Walls about 80mm long. Large Stone City Walls about 150mm. 2 Tower styles for the Walls. <b> These can be...

Drum scale Z 1:220

thingiverse

Oil Drum for scale z 1:220 model train. ...Fits on euro pallet.

Z-scale train Diabolo bridge

thingiverse

Z-scale model train Diabolo bridge. "Artist view" of a train bridge near Brussels. Designed for filament printing at 0.1 thickness. Used some fast chromakeying for the pictures. ... keywords mots-clé: Z pont 220 Infrabel SNCB NMBS 3D

Christmas Market huts (z-scale)

thingiverse

Small huts for a christmas market in z-scale. Assembling: Paint parts as you like and glue roof on top of the hut. Paint Christmas tree with colored dots as decoration. Printing: Print all elements base plate and roof with the lower side...

Z scale boat and trailer

thingiverse

Just a simple little boat and trailer for a Z scale layout. ...In the picture is a Dodge pickup, https://www.thingiverse.com/thing:2807834/files, that I printed at 25%

Z-wobble in 3D printing and ways to eliminate it

Let's start with what wobble is.

This is a cyclic printing defect, which is expressed in the displacement of layers by fractions of a millimeter along the Z axis.

i.e. it is the inability of the screw, raising or lowering the Z-axis, to follow its path exactly. At certain moments, the axis mount sticks, preventing it from moving to the desired height, due to which the current layer is smeared into the previous one.

Most often, this defect is expressed as waves on the surface of the model.

For a better understanding, I sketched in paint why this happens.

So, in order to get rid of wobble on your printer, you need to determine whether the problems are really caused by it, and not by poor quality filament with an unstable bar diameter.

Print any model with flat vertical walls twice, one after the other from one file, put them side by side and compare the models with each other. Identifying the problem can be difficult if there are defects on the models caused by both wobble and bad filament.

If the wobbler could not be unambiguously distinguished among other printing defects, then you should first try replacing the plastic spool with another one, preferably from another manufacturer.

Let's move on to the mechanics. If you are absolutely sure that the problem is in the Z axis, then you should pay attention to 5 points:

1) in the coupling connecting the motor shaft and the screw that transmits rotation to the support nut, there must be a space between the shaft and the screw, as shown in the screenshot. Also, if you have a one-piece clutch, then you should replace it with a spring or split one. Since it is not designed to compensate for misalignment with a shaft

2) The support nut attachment must not be rigidly fixed. From the options for solving the problem, one can single out a simple and reliable one:

Easy option: unscrew the screws holding the support nut, lubricate them with threadlocker and screw them back, but not completely, so that the support nut can only move freely in the XY plane

A reliable option: find on the Internet or simulate a decoupling that allows the support nut to move within certain limits, but does not fix it to the axis with screws. An example of such a decoupling is installed on Artillery printers.

3) fixing the screw at the top point in the presence of only one motor is impractical, it causes only an additional restriction of the free rotation of the screw, which can affect the uniformity of the axis movement. If 2 motors are installed and a timing belt between them, you can choose one of 2 ways: either remove the top mounts and the timing belt is completely, or try to set the entire system as coaxially as possible.

4) Check the screw, it may be deformed, in this case it is necessary to replace it with a new one.

5) Check the axles and carriages. For openbuilds, adjust the eccentrics and check the wheels for proper operation.

If the guide axles are shafts with plain bearings or rails, and there is play in them, then there is nothing to help you :D, most likely you will either have to put up with it or buy new high-quality guides.

Also, stripes on models can be caused by unstable temperature in the hotend. To fix this problem, you need to calibrate the PID controller of the heater. To do this, you need to have EEPROM activated in your firmware.

If so, then download and install the Repeater host, connect through it to the printer, go to the "management" tab, enter the command M303 C8 E0 S235

where:

M303 - team code in marlin,

C8 - number of attempts to find the correct coefficients

E0 - extruder heater code

S235 - target temperature

After the end of the auto-calibration process, 3 lines with coefficients will appear in the bottom of the terminal.

at the top of the program, click on "configuration" → "EEPROM config"

In the window that appears, look for the 3 necessary lines "PID" and write the values from the terminal into them. Then we save everything and turn off.

It should be noted that the dependence of the temperature on the thermistor on the output value going to the board is not linear, but obeys an exponential law. Because of this, the temperature measurement accuracy of the sensor at 200° and 260° will differ quite a lot. If you have a regular Chinese NTC 3950 sensor, it is likely that the dependency table in the firmware will differ from reality, which will not allow you to set an adequate temperature above 210 °, and, accordingly, calibrate it.

https://3dtoday.ru/blogs/3diy/the-thermistor-setting-in-the-firmware/

Answers to questions on z axis, page 2

Different steps per unit in Z-homing I recently had some problems with the printer. My board and drives burned out. Long story short, I now have MKS-Gen-L v1.0 with LV8729for X,Y,Z axes and extruder with these steps/mm: …
Artillery Sidewinder X1 print quality: Z wobble possible The printer I'm using is the Artillery Sidewinder X1. You can see in the attached photos that I have a lot of inconsistency between the layers. The problem never went away and I always thought that…
Re-homing Z: Resume printing problem, what if I can't go home? Launching Marlin 1.1.2, printing from Octoprint on Linux PC. So the computer freezes and I have to pause printing and reboot. It's a 36 hour print with 11 hours left and I wouldn't like to...
Z homing problem on Ender 3 Pro with Marlin I just changed the motherboard on my Ender 3 Pro to MKS GEN_L v1.0 and flashed the latest Marlin to it. I manually calibrated the table using the standard XY and Z auto home commands on...
Labists ET4 printer nozzle hits the table after auto leveling I use Slic3r to create G-codes for my Labists ET4 printer. Usually no problem. Now, as soon as I tried to start printing, the nozzle head went down as usual, but on this one ...
Ender 3 : problem on Z axis ONLY for first layers There is a tricky problem here : I'm printing a plate (76x70x3 mm) however the height (Z-axis) is not always correct there... My extruder has been recalibrated. My table has been recalibrated. So first…
Wrong start Z I just bought the Ender 3 Max and knew from the start that something was wrong. I figured out the problem: it's from the first few millimeters of Z-axis movement. I turn on my 3D printer, go to prepare,…
Z Axis release after upgrading from stock FW to Marlin 2.0.7.2 on Ender 3 Pro I've had a table leveling issue since upgrading my stock Ender 3 pro to Marlin 2.0.7.2 . The update process seems to have gone well, I get the new options, and it shows...
Wrong z-axis scale When printing, the z-axis appears out of scale. I use a homemade 3D printer. For example: When printing a 10x10x10 mm cube, the Z height is 9.01 mm; When printing a cube 20x20x20 mm, height Z ...
Measuring Z Position Accuracy I am looking for a method to easily measure/evaluate Z position accuracy using handy or readily available equipment such as a high precision digital caliper. In…
Wave shift pattern on the Z axis I have a Creality CR-10S Pro V2, I have been printing regularly for a month, and then suddenly I started noticing waves on the Z axis. They are already visible with the test cube, but the deviation increases with tall, and…
Does anyone know the thread size (pitch and lead) of the Anet A8 lead screw? I bought a new printer and unfortunately the left lead screw nut is not tightened. Does anyone know the thread size including the pitch and lead of the lead screws?
What do you call the Z axis mechanism in a Cartesian 3D printer? What do you call the mechanism that allows linear movement along the Z-axis in a Cartesian 3D printer? I know what the individual parts are; this is a lead screw, a smooth shaft . .. but what to call it ...
Why are 3D printers with a fixed build platform not popular? I'm trying to build a homemade 3D printer for myself. I researched many different styles of printers and found this type of printer which has a fixed bed that stays still in…
Hotend moves up the HOME command My Ender 3D with BLTouch and Marlin 2.0.1 firmware worked flawlessly for 3 months. Yesterday, without any hardware or software changes, it started behaving strangely: per command…
How to move the Z-axis to a certain position (Z-max) after printing? I have a cube format Cartesian printer (table moves vertically) with Marlin 2.x I can't find a way to get it to go to Z-max (23 cm) when the print is finished. The idea is…
AnyCubic D (aka Predator) - Z-nulling and first layer problems In short, my wife and I are now proud owners of the AnyCubic D, also known as the Predator. It's not our first 3D printer, but it's our first "delta" design with a circular mounting plate and extruder. ..
Monoprice MP10 Mini, can't get a decent print Update: If I press the "Home" button, it correctly positions the nozzle above the print bed, with a gap wide enough to insert a piece of paper between the nozzle and the surface. But, and here…
Z motors only work manually, not at home correctly I am currently setting up my custom 3D printer with BTT SKR mini E3 v1.2 and so far I have all x endpoints and motors working and y. The problem is that when trying to place...
Very unusual diagonal edging Edit #2 The title has changed again to better reflect the nature of the question. I installed the Z axis motor on top of the frame to alleviate any misalignment that might occur. Z axis…
Anet A8 moves down into the chunk, destroying it, just before the printer is set to complete Hopefully someone can help me figure out what's going on with my printer. I printed a couple of pieces and they printed great. But for some reason from time to time the printer goes down in a chunk...
Ender 3 nozzle getting closer and closer to the previous layer as the print progresses I'm trying to print lithophane with my Ender 3, but the nozzle is getting closer and closer to the previous layer, layer by layer. I thought the cause of the problem might have been a gear lock due to...
Z-offset keeps changing Flashforge Hunter I'm new and I'm starting to have trouble printing with my Flashforge Hunter. I have found that with each calibration, the Z offset of the building plate increases by about 0.1-0.2 mm, currently…
Z steppers just hum, vibrate and don't move at all As I said in the title, there are some issues with my z-axis steps. They will make a whirring sound and vibrate a little, but they won't actually spin. I'm pretty sure it's a problem with...
Z axis home then bounces up 15mm and stays there when printing Prusa, I3 Mk2. Marlin 2.0.3 Before installing Marlin 2.0.3, the test model is printed in small print. It's not a slicer or GCode. I tried several models and they all worked fine until…
Z axis is limited to 15mm at height I have a Prusa i3 and I have a problem with my Z axis. It stops at 15mm even if the object to be printed is larger than that. Could you please help me solve this problem? …
Squealing noise when moving z-axis down I had my Prusa i3 clone for about two years and it always made a screeching sound when z-axis moved down. I have tried many solutions to this problem such as lubricating the z-bars, printing a new top...0079

How to reprogram a NEW Prusa MK3 MMU2 to accept a higher Z axis In a previous question I changed the Z axis height of my Prusa Mk3 from 250mm to 350mm. Before updating the MMU2, I changed the code in my printer to accept the new height as follows: I changed…

Prusa i3 MK3S Z axis moves down in the calibration wizard While recalibrating my printer (due to nozzle snagging on prints) the Z axis went down where it usually went up, damaging the steel sheet of the heat table in the process.

Then he didn't pass...

Z motor does not move during automatic home My Monoprice maker select recently burned its melzi board. So I bought the ramps 1.4 kit. I plugged it all in and flashed the firmware with marlin (most recent build). When it boots up,…

Z axis end stop not working after installing Marlin firmware I had my Monoprice Maker Ultimate for a few months and started making updates to it. My latest change is to update the firmware to a newer version of Marlin,…

What is this part and does it have anything to do with the fact that the z-position is broken? I recently bought my first monoprice maker select v2 3d printer. After a few print jobs, this piece fell out. I have no idea where he came from. But then I notice that...

Marlin "Tune->Desk Z" vs "Tune->>Babystep Z" vs Z Offset? What is the difference between: Tune -> DeskZ Tune -> baby step z Management -> Movement ->> Offset Z>> And when should you use Table Z?

CR-10S Pro pauses and starts again I found this question, CR-10 randomly pauses for a few seconds, which someone asked earlier.

I am experiencing the same thing, only on the CR-10S Pro. None of the suggestions on this post…

Print quality: z fluctuation problem I replaced the z axis of my diy printer yesterday. Now I have some weird waves on the side of my prints. Are the threaded rods bent or could this be a vibration problem? Or screed…

How to calculate correct multiples of layer heights? We all know that the best layer height is when you have several full steps. If this is not the case, sometimes steps are skipped and result in poor adhesion between layers when one step in height...

Platen lifts up for printing I am new to 3D printing and am building/calibrating an original Ultimaker+ for my college. I'm done with the whole build and the printer is working fine except for one thing. Platen Raises…

Is there a reason why the M5 z drive nut is too loose on the lead screw? So I bought a prusa i3 kit from folger tech on ebay.

I put it together and even printed out a few parts, but I noticed that a lot of the noise only seemed to happen when the engine…

Why not use the GT2 instead of a Z-threaded rod or lead screw? Having just re-read Tom's excellent answer to my question about the advantages of GT2 over a rack, my comment reflects 1: Why is a threaded rod or lead screw used for…

Lead screws - M8 instead of M5? I'm building a Prusa i3 MK2S (cart). I'm having a really hard time finding M5 rods for the Z axis, I have an M8 screw with an 8mm lead, so I thought since M8 is widely available online, I might just…

Printer head too low when printing Problem My CR-10 printer seems to be trying to print the model 4 or 5 layers too low. This means that for the first few layers, the print head is pressed against the table, preventing…

Z-axis problems: Z-axis was not raised enough at the beginning My printer had some kind of problem with the Z-axis.

Here are the details: When I printed the model, the bottom of the model got jagged edges (as shown in the picture) and the height of the model was a bit… 220x220x250mm I'm new and finally got half a decent print last night, but tonight I...

Is there a problem with removing the polished rod from the Z axis? I recently had a problem with my printer's z-axis. To fix the problem with the fixed Z axis, I remove the left polished rod. Can I use the printer with only one smooth...

What is the advantage of two z-axis motors? Some RepRap models use only one motor for the Z axis, others use two. For example, there is 3drag , which has only one motor and a smooth rod on the other side. There are…

Tevo tarantula Z - port burnt out I burned Z - port for Z-terminus. Can I use the Z+ port? I'm using Jim Brown's Marlin Firmware. Any help in changing this is greatly appreciated. I don't know anything about the code.

Z scale 3d printing

Model Railway – Tagged "3D Printed

▷ z scale buildings 3d models 【 STLFinder 】

Z-wobble in 3D printing and ways to eliminate it

Answers to questions on z axis, page 2

Learn more