(506) 2240-6804
Hydro flask 3d print
▷ hydro flask 3d models 【 STLFinder 】
Hydro Flask mouthpiece
thingiverse
Replacement mouthpiece for Hydro Flask straw lid.
life size hydro flask
cults3d
this is a life-size hydro flask
64oz Hydro Flask Boot
thingiverse
Protective boot for a 64oz Hydro Flask. ...Print with 10% infil gyroid.
Hydro Flask Lid Strap
thingiverse
This is a replacement Lid Holder/Strap I designed for my 40oz / 1. 18L Hydro Flask, as the original strap wore out and broke.
Hydro Flask Handle Replacement
thingiverse
Replacement handle for the Hydro Flask I created this thing to replace the stock rubber handle which disintegrated after more than a year of use. ... Printed in TPU.
Hydro-Flask Coin Holder
thingiverse
A cupule of weeks ago I got a Hydro-flask to replace my old water bottle; The only thing with Hydro-flasks is that they can dent, so I bought a protective rubber sleeve for the bottom. ... From there, I just let my creativity flow
Hydro Flask Wine Bottle
sketchfab
The first out of four model practice for Modelling in 3D module.
...It is to create a 3D model of either a tumbler or water bottle. I chose to make the Hydro Flask Wine Bottle.
Hydro Flask Handle Clamp
thingiverse
This is a clamp that you can print to carry your 32 oz and 40 oz Hydro Flask. It is very strong and kinda tough looking. I designed it you all of us 3D believers. ... (Those are 1.5 inch 4 mm socket head cap screws)
Hydro Flask Handle
thingiverse
MUST SCALE UP 25.4 times as the stl cam out in mm, thanks fusion 360 Might need to tweak the bore ID to fit your bottle as mine has stickers and is dented so its currently at 3.59" ID Fits 3.56" OD hydro flask bottles Requires: 5x M5x20 button head.
..
64oz Hydro Flask Boot
prusaprinters
Print with 10% infil gyroid. Print instructionsCategory: Household Summary Protective boot for a 64oz Hydro Flask. ...Print with 10% infil gyroid.</p> <h4> Print Settings</h4> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p><p...
Hydro Flask Sock
thingiverse
... on the 32 oz wide mouth, working on a 32oz version now. ... Protective sock printed in TPU for any wide-mouth hydro flask. You have to print this is in semi or full flex filament as the tolerance is extremely small. ...I drew this up in fusion 360
21oz Hydro-Flask Sleeve
myminifactory
This object was entered in the MakeShaper Design Challenge (see all entries here).
This is a flexible sleeve for a 21oz Hydro-Flask or similarly sized water bottle. It adds extra grip to the bottle, making it less slippery, and also protects it...
Hydro Flask Cup Holder
thingiverse
I tried a couple I saw on here but they were a little flimsy, the top was too short to support a heavy bottle and and they didn't fit a hydro flask with a boot on it so I started from scratch. Also rounded the edges to eliminate the need for...
Miniature Hydro Flask
prusaprinters
As I said earlier, the real Hydro Flask is a well made water bottle and I would really recommend getting one of those instead of using this.
Besides, this is small and really will not hold much water!</p> <p>Finally as I have done on my other...
Hydro Flask Handle Clamp ZK
thingiverse
This is a Hydro Flask handle that I designed and now I've modified for my pal Zach. ...Use 4 mm socket head cap screws.
Hydro Flask 20oz 16oz Handle
thingiverse
Here's an updated version of the Hydro Flask handle that's been reduced in size for the 20oz and 16oz versions that are ~74mm in diameter. Original version is on the left with the orange color Hydro Flask. This remix version (thinner handle) is on...
Hydro Flask Bumper 24 oz
thingiverse
I designed this flexible bumper to fit my kids 24 oz.
...Hydro Flask water bottles. It fits well into the recessed bottom of the container. ...It's designed to fit snug yet still come off when you need it to.
Hydro Flask (32 oz) Cupholder
thingiverse
I designed this hydro flask cupholder for my 32oz hydro flask. I was tired of it rolling around in my front seat. I designed to specifically fit my toyota camry (2016) but it may work for you. If it does not, I added the solidwork files Printing:...
Hydro Flask Car Cupholder Adapter
grabcad
* except the 64 ounce wide, True Pint and the two food sizes This photo from the company's FAQ shows the : https://d3oco3p7h3m8kx.
cloudfront.net/skin/frontend/hydroflask/default/images/HF-Product-Size-Chart-for-Web.png The bottom remains open such...
Hydro Flask Cup Holder Adapter
prusaprinters
Made this for my sister to fit her large hydro flask in a normal-sized car cupholder. ...Made the middle hollow to reduce the amount of plastic and lower print time as well as act as extra storage. </p>
Hydro flask Cup holder adapter
thingiverse
... more water. ...Her choice of water bottles would not fit anywhere in her car. I designed a cup holder adapter that will hold her Hydro Flask with its Hydratego cover.
...the bottle now stays in place even when she makes sharp turns or sudden stops.
Hydro Flask Wide-Mouth Funnel
thingiverse
This is the funnel for the Hydro Flask Wide-Mouth Vacuum Water Bottle - 40 fl. oz. bought at REI. This would make the job of putting ice into the flask much easier. It's a customizer thing, so measure your flask's mouth inner diameter and print one...
64 ounce Hydro Flask Handle
prusaprinters
I measured this for the official hydro flask specs so if you have something that looks like that it might not fit right off since some brands are a bit larger. .
..This can easily be resized to fit other sized bottles.</p><p>Here is the link to the file...
Bicycle Bottle Cage (Hydro Flask)
thingiverse
... and one with a 70mm diameter. The picture shown is a 65mm. The bottle cage was intended to snugly hold a 20oz Hydro Flask Wide Mouth tumbler. It should also hold a 24oz since it has the same diameter. ...But I don't own one so haven't tested it ;)
Hydro flask 32oz widemouth boot
prusaprinters
This protection boot fits on a 32oz hydro flask widemouth bottle.Print instructions:vase mode (this is important)0.7 wall thickness (this is important)0.
2 layer height20 solid bottom layers (see in slicer preview to judge how much bottom layer you...
Hydro Flask Low-poly 3D model
cgtrader
Hydro Flask Standard Mouth 620ml
Funnel for wide mouth Hydro Flask
thingiverse
Funnel for wide mouth Hydro Flask. I made this to make is easier to put ice in the wide mouth Hydro Flasks. ...Print Settings Printer: ANET-A8 ...
Hydro Flask wide mouth ice funnel
thingiverse
Makes filling your Hydro Flask easier at the refrigerator dispenser.
...Stop dropping ice all over the floor.
2.3L Hydro flask cap holder
thingiverse
My hydro flask has broken so I must buy another one. But HEY I've got a 3d printer. I repair it These flask seems to be everywere. ...
Hydro Flask Water Bottle 3D model
cgtrader
Hydro Flask Water Bottle Stainless Steel & Vacuum Insulated Keeps cold drinks icy cold and hot drinks piping hot for hydration any time anywhere
▷ hydro flask cup holder 3d models 【 STLFinder 】
Hydro Flask Cup Holder
thingiverse
Fits a 40oz Hydro with a boot securely in a car cup holder.
This was designed specifically for my 2021 RAM 1500 but could fit others. See dimensions below. I tried a couple I saw on here but they were a little flimsy, the top was too short to support...
Hydro flask cup holder
thingiverse
hydroflask cup adapter for car
Hydro flask Cup holder adapter
thingiverse
... more water. ...Her choice of water bottles would not fit anywhere in her car. I designed a cup holder adapter that will hold her Hydro Flask with its Hydratego cover. ...the bottle now stays in place even when she makes sharp turns or sudden stops.
Hydro Flask Cup Holder Adapter
prusaprinters
Made this for my sister to fit her large hydro flask in a normal-sized car cupholder.
...Made the middle hollow to reduce the amount of plastic and lower print time as well as act as extra storage. </p>
32oz. Hydro Flask car cup holder adapter
thingiverse
This fits a 32oz. ...Hydro Flask bottle. 32oz. doesn't fit the cup holders in my car so I decided to design this as simple as possible for easy printing. I use ABS to print mine but PLA should work fine as well. ... Hope it works for you.
40oz Hydro Flask Cup Holder Adapter Universal (Subaru Legacy/outback 2015-17)
thingiverse
This is a cup holder adapter for the 40 oz Hydro Flask.
It fits perfectly in my fiancee's 2015 Subaru Legacy, but due to the flexible insert, it should fit many different vehicles.
I included the step file in case anybody wants to make...
Taller Top only: UPDATED: Hydro Flask and Coffee Mug MODULAR Car Cup Holder Adapter
thingiverse
Just stretched strongcraig's Hydro Flask modular cup holder adapter top piece in Meshmixer, because there were complaints about it being too short and flasks falling out if you brake too hard. I don't have a Hydro Flask to test it with, it's for...
Taller Top only: UPDATED: Hydro Flask and Coffee Mug MODULAR Car Cup Holder Adapter
prusaprinters
Just stretched strongcraig's Hydro Flask modular cup holder adapter top piece in Meshmixer, because there were complaints about it being too short and flasks falling out if you brake too hard.
I don't have a Hydro Flask to test it with, it's for...
UPDATED: Hydro Flask and Coffee Mug MODULAR Car Cup Holder Adapter
thingiverse
except the 64 ounce wide, True Pint (now fits the wide two piece from the 1/21/20 update) and the two food sizes This photo from the company's FAQ shows the :...
Volvo XC90 Rear Cup Holder Adapter (fits Hydro Flask)
thingiverse
Don't get me wrong, I love my 2017 Volvo XC90 but the backseat cupholders are pretty much worthless. They are millimeters too small to handle the most popular waterbottles! I searched around thingiverse and found this.
..
2.5in cup holder to 32oz hydro flask adapter
thingiverse
32oz Hydroflask to 2.5in car cupholder adapter. This drawing allows for a rubber boot on the bottle as well. ...Print product with bigger side down to avoid excess filament building up.
Hydro-Flask Coin Holder
thingiverse
A cupule of weeks ago I got a Hydro-flask to replace my old water bottle; The only thing with Hydro-flasks is that they can dent, so I bought a protective rubber sleeve for the bottom. ... From there, I just let my creativity flow
64 oz Hydro-Flask Car Holder
thingiverse
Modified the Nalgene car holder to accept a 64 oz Hydro-Flask, also made inserts so it will work with the Original Nalgene bottle, as well as a 32oz Yetti Cup.
The Yetti Insert will hold the Nalgene bottle just fine, it just has a 4mm larger dia...
40 Oz Hydro Flask Stationary Bike Holder
thingiverse
A replacement water bottle holder to fit my 40oz Hydro Flask on my stationary bike. Slotted holes should fit most bikes. ...Used oversized washers and a screw to attach.
2.3L Hydro flask cap holder
thingiverse
My hydro flask has broken so I must buy another one. But HEY I've got a 3d printer. I repair it These flask seems to be everywere. ...
Hydro Flask 32 oz bottle holder for Jeep wrangler
thingiverse
Cant fit your 32 oz.
...Hydro Flask in your cup holder? This is the perfect print for you! This holder mounts right to the roll cage on a jeep wrangler Jk for easy secure storage! ...All you need is come tip ties to hold it to the cage and your all set!
Ford F-150 Hydro Flask Water Bottle Holder
prusaprinters
In the 2015+ Ford F-150 the cup holders are too small to hold a Hydro Flask. This print hangs on the tracks next to the central console, and holds your large Hydro Flask for you. This fits great in my 2015 Ford F-150.</p><p><strong>Print...
life size hydro flask
cults3d
this is a life-size hydro flask
Hydro Flask mouthpiece
thingiverse
Replacement mouthpiece for Hydro Flask straw lid.
Hydro Flask Lid Strap
thingiverse
This is a replacement Lid Holder/Strap I designed for my 40oz / 1.18L Hydro Flask, as the original strap wore out and broke.
20 oz Hydro flask holder for 2018 Toyota Tundra
thingiverse
My 20 oz hydro flask kept tipping over when I would turn corners so I needed something to hold it. The holder measures as follows: Height: 70mm Top Diameter: 107mm Bottom Diameter: 93mm Hole: 74mm This was made for a 2018 Toyota Tundra. Not sure if...
64oz Hydro Flask Boot
thingiverse
Protective boot for a 64oz Hydro Flask.
...Print with 10% infil gyroid.
Hydro Flask Handle Replacement
thingiverse
Replacement handle for the Hydro Flask I created this thing to replace the stock rubber handle which disintegrated after more than a year of use. ... Printed in TPU.
Aqua Flask Cup Holder Adapter
thingiverse
This is a simple design meant to adapt the Chevy Pickup cup holder to accommodate the oversized diameter of an 40oz Aqua Flask bottle. ...I've included an .OBJ file in case someone wants to customize it for their car or truck.
Hydro Flask Wine Bottle
sketchfab
The first out of four model practice for Modelling in 3D module.
...It is to create a 3D model of either a tumbler or water bottle. I chose to make the Hydro Flask Wine Bottle.
Hydro Flask Handle
thingiverse
MUST SCALE UP 25.4 times as the stl cam out in mm, thanks fusion 360 Might need to tweak the bore ID to fit your bottle as mine has stickers and is dented so its currently at 3.59" ID Fits 3.56" OD hydro flask bottles Requires: 5x M5x20 button head...
Hydro Flask Handle Clamp
thingiverse
This is a clamp that you can print to carry your 32 oz and 40 oz Hydro Flask. It is very strong and kinda tough looking. I designed it you all of us 3D believers.
... (Those are 1.5 inch 4 mm socket head cap screws)
64oz Hydro Flask Boot
prusaprinters
Print with 10% infil gyroid. Print instructionsCategory: Household Summary Protective boot for a 64oz Hydro Flask. ...Print with 10% infil gyroid.</p> <h4> Print Settings</h4> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p><p...
Hydro Flask Sock
thingiverse
... on the 32 oz wide mouth, working on a 32oz version now.
... Protective sock printed in TPU for any wide-mouth hydro flask. You have to print this is in semi or full flex filament as the tolerance is extremely small.
...I drew this up in fusion 360
21oz Hydro-Flask Sleeve
myminifactory
This object was entered in the MakeShaper Design Challenge (see all entries here).This is a flexible sleeve for a 21oz Hydro-Flask or similarly sized water bottle. It adds extra grip to the bottle, making it less slippery, and also protects it...
STL file Hydroflask cupholder adapter・3D printable download model・Cults
Cricut maker mat extension
1.40 €
Best 3D Printer Files in the Gadget Category
Arduino robotic arm
3.99 €
Rotating tablet boxes with magnets
Free
Knobby - Controller Stick Extension
Free
Extender, printable on site (without assembly), without supports
1.
45 €
Belote Point Counter
1.25 €
Ultimate Print in Place phone holder
1.87 €
Death Stranding table lamp (or cosplay props)
8,80 €
Grinder GRZ
1.36 €
Bestsellers in the Gadget category
Brush rinse
2.27 €
Owl - wall key holder
1.85 €
wall key holder (dragon ball)
1.25 €
Long-legged dwarf
2.66 €
V8 engine seal in place
€1.76 -fifty% 0.
88 €
Karambit keychain spinner tiktok keyrambit NO BEARING
€1.72 -ten% 1.55 €
F18 SUPER HORNET - 50 MM EDF JET [RC AIRCRAFT]
11,70 €
CYLINDER WALL/PISTON 2-STROKE
0,92 €
Renewed bone finger
6.32 €
Dice box with mechanical rotating top
3,70 €
ELEPHANT PINK - NO PAINTING
5 €
Keyfob application
€3.50
Survival pistol with arrows
6.41 €
AR-15 LOWER MULTI-CAL.
REINFORCED DESIGN 8,50 €
Air motor, printed, fully assembled, ready to use
3.09 €
Application for creating a double text illusion
3,50 €
Do you want to support Cults?
Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so it is very easy to support us in maintaining activities and creating future developments. Here are 4 solutions available to everyone:
-
AD: Disable your AdBlock banner blocker and click on our banner ads.
-
AFFILIATION: Shop online with our affiliate links here Amazon.
-
DONATIONS: If you want, you can donate via PayPal here.
-
* INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!
STL file Thread bag holder・Design for download and 3D printing・Cults
Gender stand
2.34 €
Skull with horns
0.94 €
Halloween 3D decoration for hanging a box with a ghost and a pumpkin
0,90 €
Rotating plant hanger
2.34 €
F*CKOFF lighter case
Free
Lighter case "Alaska"
Free
#1 Case for lighter DAD
Free
#1 MOM Lighter Case
Free
Best 3D Printer Files in the Miscellaneous Category
Squirrel with articulated tail
0.
93 €
Folding cardboard box - small
Free
BONG WEED WITH 80 mm GLASS
0,80 €
Mini AR 15 Grip
Free
Rubber gun / Pistola de elastico
2.48 €
Eurocopter AS350 Ecureuil (RC helis 470L)
51.49 €
White Rabbit
Free
1:10 Scale off road camper
28.09 €
Bestsellers in Miscellaneous category
Key holder for middle finger
1 €
Speeder-Pad support on FLSUN V400 and FLSUN SuperRacer
3 €
Christmas stitch
1.
25 €
Stand FLSUN V400
3 €
Mickey Christmas night light Litophane
3,50 €
Addams Thing
1.99 €
RS-X-Bow "Government - 1911" style
6.25 €
Chainsaw Man - Denji
€17.79 -fifty% 8.89 €
Charizard - pokemon with flexible articulation (seal in place, without supports)
3 €
CHRISTMAS TREE v2
1,50 €
Giarados - articulated sea serpent
1.50 €
Predator-inspired movable mask
6.
