Manve 3d printing pen

Statistics

Since June 28, 2022

Last price changes

Price Alert ????

Create Your Free Price Drop Alert!

Set Alert for 3D Pen Filament Refills - 1. 75mm ABS Printer Refill Pack - 240 Linear Feet in 20 Foot Lengths Per... - $16.99

3doodler 3d printing pen reviews, what is 3d pen

best inexpensive gaming monitors The more things you have, the more strings you have attached to you All the Hermes handbags are made of fine leather which is spotless, so you don't need to worry about their lifespan, they are really durable. vr headset for sale,Ball is now at the top of the Billboard Hot 100 Certain debts of the company have to be prioritized and settled before others such as; employees' salaries or wages, or debts accrued while the company is in liquidation.

cheapest ddr4 ram,?Fox Friends They look and feel great (being a sewer I appreciate the quality). best places to buy gaming laptops,Choosing your Dooney Bourke Giraffe designer purse on-line will save you a lot of time and money My "kitchen" is galley-style, with a mini fridge, small microwave, and two shelves in a vertical column.

gaming laptops on sale Four of the most important fashion accessories for women that could help them to make a style statement are listed below . home security panel and smart devices,best placement for wifi extender Longevity and the danger of outliving your money.

vr headset view,They look and feel great (being a sewer I appreciate the quality) Not all replicas are bad -- there are plenty of imitation handbags that use the same premium materials as Gucci and adhere to high standards of quality, giving consumers an economic alternative to authentic designer purses. syma drone with camera,One Thanksgiving I was in Houston, and went to a butcher downtown what is the best wifi booster extender.

13 gaming laptops Wifi Extender 2019 MILAN (CNN) -- Combine a touch of hippie chic, a dash of disco diva and a pinch of alternative pop and you have Gucci's accessories for fall/winter 1999. pen that draws 3d,With water constituting so much of your body you will not build muscle without drinking enough water By this I mean getting stronger without getting much heavier Under Shariah law, the following relations are considered as heirs: Parents, Spouses, Children/ Uterine Children, Grand children, Brothers and Sisters, Grandparents (Paternal), Uncles/Aunts (Paternal), Nephews/Nieces.

samsung vr headset games,The fabric of a diaper bag should be easily spot-cleaned or can be wiped clean Similarly, the comfort rating also scored a ten. 4k gaming monitors 2018,This collection is designed to commemorate its legendary fashion designer Bonnie Cashin But in recent years domestic companies are coming up with good quality leather bag and shoulder bag so that the customers do not have to go to the foreign market to buy them.

top 10 gaming monitors under 400 For our international users, please be aware that the information you submit when registering for our services is collected in the United States of America Therefore the more cluttered your environment, the more stagnant your life is likely to be, and carrying around a lot of clutter both internally and externally will slow you down and tire you out Although tactile learners are a minority in society, many youth coaches exclusively use this style. vr headset stand,She said Harwood asked for a copy of the case if she could find it best value 4k tv 2018 The first thing you need to understand is that one does not actually cut glass but rather breaks glass along a predetermined line.

32 gb ddr4 corsair ram,A lot of American food was sweeter than I was used to, but the surprising savory snap to this pie made me fall in love with it at first bite Stylish, Comfortable Durable. cheap gaming monitors 2015,Traditional Print Dashikis: These are loose fitted, colorful, printed garments having a V-shaped ornate collar with embroidered neckline and sleeves LA/California (my home area of my home state) was the destination city and/or state of all of 4 aircraft hijacked as populated missiles and destroyed on that disastrous day 11 years ago.

smart home app devices The 2006 Luxury Line, with its metal chain embedded in leather, was one of the most anticipated Coco Chanel handbags of the year "The Web works well for buying cameras and other hard goods but for soft goods, such as clothing and accessories, it's not the same as shopping in a store ". pocket drone with hd camera,Curves and patterns are composed harmoniously on the scarf to create a warm and laid-back heaven best low price wifi extender.

4k gaming monitors with hdr,How do they do it? It's really a simple one word answer January 19, 2013 at 10:15 am | Reply. aerial drone with camera,best wifi extender app for my phone intel for all in one computers At times, shopping can cheer up a person, can show them that even in their sorrow, they can still step out and occupy their time by doing something that will brighten their spirits!.

Related Posts

• http://www.skippersoft.net/Styles/en/p221.html
• http://www.skippersoft.net/Styles/en/p284.html
• https://www.hotelcasasanagustin.com/views/tech/news95.html
• http://www.skippersoft.net/Styles/en/p25.html
• http://www.skippersoft.net/Styles/en/p143.html
• https://www.hotelcasasanagustin.com/views/tech/news101.html

Best 3D Pens of 2017

3D pen is not only an innovation or a fashionable trinket, but also a great tool that helps children (and adults, too) better understand 3D objects.

Today, 3D pens use two 3D printing technologies. FDM is short for "Fused Deposition Modeling". The same principle is used in many desktop 3D printers. In this case, molten plastic is fed from a heated nozzle. Most of the 3D pens below use this technology.

There is a second option - when a special ink, called "photopolymer", hardens under the influence of ultraviolet radiation. Liquid ink is fed through a nozzle and hardened under the influence of LEDs installed near the nozzle. This technology is especially safe for children as the nozzle stays cool.

A superficial view of the same Amazon shows that there are already over 100 different models. You can look at Aliexpress and find 100 more. In general, there are plenty to choose from. Most are sold in the same price range. There are several premium models that cost more.

The article discusses the most popular models of 3D pens, their strengths and weaknesses. We hope this will help you choose a 3D pen for yourself.

The best 3D pens for kids

Let's take a look at the best 3D pens for kids first. In all these models, the nozzle is not heated, so that children do not burn their fingers. However, most instructions recommend that adults still supervise children while using the 3D pens.

Tech 4 Kids 3D Magic Imagi Pen ($20)

The main target audience of the Tech 4 Kids 3D Magic Imagi Pen is children. This device is safe to use because the nozzle does not heat up and no thermoplastic is used for printing. Instead of thermoplastic, a liquid polymer is used, which is sometimes referred to as "Cooled Ink". This polymer hardens when exposed to light. The curing process can be accelerated by using ultraviolet light. This allows you to print vertically.

LEDs are installed at the end of the 3D pen, so that the material is exposed to ultraviolet radiation. This technology has another advantage. The LEDs can last a very long time on 3 regular AAA batteries (batteries not included). That is, unlike a heated nozzle, you are not tied to a power supply.

Features:

• For children (parental supervision recommended).
• Average price
• Uses photopolymer technology (UV light curing)
• Cordless
• Powered by 3 AAA batteries (not included)
• Average price: $20

IDO3D

IDO3D Vertical is a range of 3D pens that use the same technology: the material hardens when exposed to ultraviolet light. The material is fed by manual pressing on the cartridge. The nozzle does not heat up. Comes with a removable UV light source. Cartridges in different colors. Their number depends on the selected product.

On the IDO3D website you can find free video tutorials and projects.

Features:

• for children (it is recommended to supervise parents)
• Available price
• Used technology of photopolymers (staining material under the influence of ultraviolet light)
• Cordless
• Average price: $ 10 - $ 27

CCTREEPER PENTER $19)

The CCTREE 3D 3D pen uses PCL, a low temperature, non-toxic material. The manufacturer claims that it can be printed at 40°C, meaning it can even be printed on leather (not recommended). At the same time, the CCTREE 3D 3D pen can print PLA and ABS plastics with higher temperatures. Due to the motor mounted on the side, the appearance of the handle is slightly unusual.

Features:

• for children (it is recommended to supervise parents)
• Available price
• Low print temperature, if the material PCL
• FDM technology (PCL, PLA, ABS)
• Average price: $ 19

ATMOSFLARE 3DLARE Drawing Pen ($24)

The AtmosFlare 3D pen uses photopolymer technology. The material hardens under the influence of ultraviolet radiation. There is no automatic material feed. The user must press the cartridge to feed the material.

Includes four nozzles, one AA battery, which lasts for four hours, two cartridges with printing material and the 3D pen itself.

The manufacturer recommends avoiding printing on surfaces that reflect light. Since ultraviolet light causes the material to cure, reflected light can cause the tip to clog. In addition, reflected ultraviolet light can cause damage to the eyes. So parental supervision is recommended.

Features:

• Child (Parental supervision recommended)
• Affordable price
• Uses photopolymer technology (UV light curing)
• Cordless
• Powered by AA batteries (last about 4 hours)
• Average price
: $24

3Doodler Start ($69)

3Doodler Start costs $69 and is aimed at children over 8 years old. An important feature is that the company has developed a special degradable plastic that melts at lower temperatures than PLA or ABS.

3Doodler did a great job with the ergonomics and simplicity of their product. One speed and one print temperature available. The micro USB port is used for charging. There is an LED indicator that shows the charge level and whether the extruder is hot. Button on / off.

On 3Doodler's website you can find over 200 projects that you can implement. The service can be used both to start working with a 3D pen and to further search for inspiration. In addition, 3Doodler Start is also sold as educational kits.

Features:

• Portable
• Easy to use
• Child friendly (warm, not hot tip)
• Uses FDM printing technology (special degradable material that melts at low temperatures)
• one button
• On/off button
• LED indicator
• One temperature setting
• Mains operation or built-in battery
• 1 minute warm up
• Average price: $69

CreoPop 3D Pen ($67)

CreoPop isn't the cheapest 3D pen - but it's safe for kids. It has only one button, so it is very easy to use. Photopolymer technology is used for printing, so the tip does not heat up.

The company provides a wide range of materials for 3D printing - from materials with magnetic properties to glow in the dark and elastic. Since photopolymer printing technology is used, the 3D pen is portable. However, using popular PLA and ABS plastics will not work.

Features:

• Easy to use (only one button)
• Child safe (handpiece does not get hot)
• Valuable appearance
• Cordless
• Built-in USB rechargeable battery Uses a large selection of photopolymer printing materials:
• technology 90 for printing (conductive, glow in the dark, etc.)
• Average price: $67

Polyes Q1 3D Pen ($80)

The Polyes Q1 3D pen prints using photopolymers. There is a special fuse for children. If it is active, when the handle angle becomes greater than a certain one, the LED will turn off to avoid potential eye damage.

Materials used for 3D printing do not produce any harmful fumes. Given that the tip doesn't get hot and the LED auto-off feature is included, this is a good, child-safe 3D pen. Naturally, printing with materials such as PLA or ABS will not work.

Features:

• Child-safe (no heat tip)
• Easy to use
• Includes UV eye protector
• Cordless
• Built-in USB rechargeable battery
• Uses photopolymer technology: materials of different colors and different physical properties
• Speed ​​control button
• Average price: $80

Top hobby 3D pens 9003D Pengent16 Manve and Intelligent16 Manve

The Manve Intelligent 3D pen is almost identical in design to the 7Tech. The only difference is that the Manve model does not have an LCD screen. Two buttons on the body are designed to feed and load the material. The slider on the other side allows you to adjust the material feed speed. There are also two LEDs. The first shows if there is material, and the second shows if the device is active. There is a mechanism that puts the device into standby mode after 5 minutes of inactivity.

Features:

• Very quiet
• Easy to use
• Not suitable for children (tip hot)
• Uses FDM technology (PLA and ABS plastics)
• Includes speed control
• whether a 3D pen is used
• Automatic standby after 5 minutes
• Average cost of Manve Intelligent 3D pen and its clones $20 – $53

MXtechnic 3D Printer Pen ($30)

MXtechnic 3D Printer Pen is a standard 3D pen. It is possible to adjust the temperature and speed, as well as select the print material. You can use a power bank to power the pen. The LCD monitor displays the current state of the 3D pen.

Features:

• Easy to use
• Not suitable for children (hot tip)
• Uses FDM 3D printing technology (PLA and ABS plastics)
• Plastic feed button
• LCD screen
• Average cost of MXtechnic 3D Printer Pen: $30 indicator light. Can print PLA and ABS plastic, easy to operate: only two buttons - fast and slow plastic feeding.

  Features:

  • Easy to use
  • Not suitable for children (hot tip)
  • Uses FDM technology (PLA and ABS plastics)
  • There are fast and slow plastic feed buttons
  • Indicator light
  • Print-Rite CoLiDo 3D Pen average price: $31

  Laimeng 3D Printing pen ($36)

  7 Laimeng 3D Pringint Pen looks like a regular 3D pen. Finding its specifications is not easy, but judging by the appearance, the device has a button for serving and temperature settings buttons. In addition, there is an LCD screen.

  Features:

  • It is easy to use
  • not suitable for children (hot tip)
  • Used FDM technology 3D print
  • buttons for filing material
  • LCD screen
  • Average cost $ 36

  Bilila 3D PRENTING ($ 39 )

  Bilila 3D is a stylish gadget that has no special features. Is that the ability to print PLA and ABS plastics. There are 4 print speeds. Charged from USB. You can use Power Bank if you need portability.

  Features:

  • Beginner friendly
  • Stylish design
  • Easy to use
  • Not suitable for children (hot tip)
  • Uses FDM printing technology (PLA and ABS materials)
    8
  • Future 900 9 Former 3D Printer Pen and Copies (from $40)

    The Future Former 3D Printer Pen is available in various colors. There is a feed button and a power button. You can print with PLA and ABS plastics. In addition to basic functions, the pen goes into sleep mode after 5-10 minutes of inactivity. All this, plus an ergonomic design, will allow you to concentrate on creativity, rather than mastering the gadget.

    Features:

    • Beginner friendly
    • Ergonomic design
    • Easy to use
    • Not suitable for children (hot tip)
    • ABS plastics)
    • Speed ​​control knobs
    • Different materials used for 3D printing
    • Average price of Future Former and copies: $40 – $60

    Scribbler 3D Pen ($40)

    This 3D pen is a standard good option. It has an LCD screen, temperature setting and material feed buttons. There are buttons for adjusting the feed rate and an automatic sleep mode mechanism.

    Features:

    • Suitable for beginners
    • Easy to use
    • Not suitable for children (hot tip)
    • Uses FDM 3D printing technology (PLA and ABS plastics)
    • Auto-sleep mechanism
    • LCD screen
    • Adjustable speed
    • Average price: $40

    Da Vinci 3D Pen ($40)

    XYZprinting is known for its 3D desktop printers. They recently introduced a portable 3D printing gadget called “Da Vinci 3D pen”. There are only two buttons on the 3D pen - for feeding and loading material and a small LED that shows if there is material for printing. The device has a very simple design. You can print with PLA plastic. The company provides 11 different colors of plastic. However, PLA plastic from any other manufacturer with a suitable diameter will probably work.

    Features:

    • Lightweight
    • Easy to use
    • Not suitable for children (nozzle gets hot)
    • Uses FDM printing technology (PLA plastic)
    • Mains powered (batteries not included)
    • Material buttons Average price: $40. It is possible to adjust the temperature in 1° increments and adjust the material feed rate. However, this model only prints PLA plastic. The OLED display shows the material feed rate and its temperature.

      Features:

      • Metal body
      • Temperature adjustable in 1° steps
      • Easy to use
      • Not suitable for children (hot tip)
      • Uses FDM 3D printing technology (9PLA plastic)
      • Built-in LED display Ability to control print speed
      • Average price: $50

      Lay3r 3D Drawing Pen ($52)

      The Lay3r 3D Drawing Pen is the most simple model. There are two buttons on the body - for loading and for supplying material. The 3D pen comes with a power supply and ABS plastic. To prevent the potential problem of high heat, a cooler is provided on the handle.

      Features:

      • The minimalist design
      • is easy to use
      • not suitable for children (hot tip)
      • Used FDM 3D printing technology (PLA and ABS plastic)
      • installed cooler
      • Average price: $ 52

      NRADGET Intelligent 3D Printing Pen ($32)

      The NexGadget Intelligent 3D 3D pen has a very ergonomic design. The LCD display shows the current state of the handle. The built-in LCD screen displays information about the type of material used, temperature and material feed rate. The manufacturer claims such a feature as "smart control" (smart control), but in fact it is quite a standard automatic material feed mechanism at the touch of a button. It is possible to adjust the feed rate - 6 different speeds are provided. The 3D pen goes into sleep mode after one minute of non-use.

      Features:

      • Easy to use
      • Not suitable for children (hot tip)
      • Uses FDM 3D printing technology (PLA and ABS)
      • LCD screen shows temperature, speed and media type
      • Automatic material feed system
      • Speed ​​adjustment buttons
      • Auto sleep system
      • NexGadget Intelligent 3D Printing Pen and copies average price: $32

      DIKI IV Intelligent 3D Printing Pen (from $40)

      DIKI IV Intelligent 3D Printing Pen is unique in that all control is concentrated in one button. The first press starts heating the nozzle. When the built-in LED turns green, the pen is ready for 3D printing. Press the button again and the feed will begin. Another press stops printing. This model is powered by a USB cable. That is, you can use Power Bank.

      Features:

      • Easy to use
      • Not suitable for children (hot tip)
      • Uses FDM 3D printing technology (PLA plastic)
      • One button control
      • Average price of DIKI IV Intelligent 3D Printing Pen and copies: $40 - $60

      Homecube 3D Stereo Drawing Pen (from $30)

      Homecube 3D Stereo Drawing Pen is a lightweight 3D pen that fits comfortably in your hand. There is a slider for adjusting the feed rate. There is a safety mechanism - the pen goes into sleep mode after 5 minutes of inactivity. The nozzle is replaceable. There is no LCD screen on the pen, but there is an LED that indicates whether the pen is ready for use.

      Features:

      • Easy to use
      • Not suitable for children (hot tip)
      • Uses FDM 3D printing technology (PLA and ABS plastics)
      • Has a speed slider
      • Medium Has a standby mechanism
      • Homecube Stereo 3D Drawing Pen and clones price: $30 – $67

      Dewang X4 Intelligent 3D Printing Pen ($60)

      The Dewang X4 3D has a simple minimalist design. There is a built-in LCD display that shows the type of material being used. On the 3D pen there is a button to switch between ABS and PLA plastics and feed speed settings. It is designed to go into standby mode after 3 minutes of inactivity. Since the 3D Pen is powered by USB, you can use the Power Bank.

      Features:

      • Easy to use
      • Not suitable for children (hot tip)
      • Uses FDM 3D printing technology (PLA and ABS plastics)
      • Feed rate adjustable
      • Automatic sleep mode
      • by USB cable
      • Market value of Dewang X4 3D Pen and clones: $60

      3D Driller 3D Printing Pen ($70)

      3D Driller is another model on the market. There is a button on the handle to adjust the material feed speed. After 3 minutes of inactivity, the material will automatically stop feeding, which ensures the safety of use. A cooling system is provided, thanks to which the material hardens almost instantly. So creating vertical lines will not be a problem.

      Features:

      • Easy to use
      • Not suitable for children (hot tip)
      • Uses FDM 3D printing technology (PLA plastic)
      • Adjustable speed
      • Material automatically stops feeding after 3 minutes of inactivity
      • Average8 cost
      • : $70

      3Doodler Create (V 2.

      0) ($98)

      This is a model from the manufacturer of the first 3D pen. 3Doodler Create (V 2.0) is an improved version of the first model - 3Doodler 3D. Simple and aesthetically pleasing design, aluminum housing. Simple, intuitive controls. There are two material feed rates and two temperature settings.

      A wide range of optional accessories are available for this 3D pen. Among them: a set of interchangeable tips, a DoodlePad printing surface, a JetPack portable battery pack, a book with projects, a special foot pedal that allows you to unload your toes. In addition, 3Doodler provides a wide range of PLA and ABS colors. Sold special Create (V 2.0) 3D pen bundles sets for educational purposes.

      Features:

      • Improved version of the “original” 3Doodler 9 pen0028
      • Quality, stable 3D printing
      • Easy to use
      • Not suitable for children (hot tip)
      • Uses FDM 3D printing technology (PLA and ABS plastics)
      • Large selection of optional accessories
      • Average market value: $98 9002 The best 3D professional pens

        HATCHBOX 3D Printing Pen & clones (from $30)

        HATCHBOX 3D Printing Pen is made of plastic. As a result, it weighs only 50 grams. The replaceable tip is made of ceramic. Can print PLA and ABS plastics. The printing temperature and material are configurable. The selected settings are displayed on the OLED screen, making the use of this 3D pen simple and intuitive. The extruder has 6 feed speeds. This is a simple but high-quality model that will help to realize any of your ideas.

        Features:

        • Very light (50g)
        • Easy to use
        • Not suitable for children (hot tip)
        • Temperature and material type displayed on LCD screen
        • Uses FDM 3D printing technology (PLA and ABS plastics)
        • Speed ​​buttons included
        • Temperature buttons included
        • HATCHBOX and copies average price: $30 – $110

        PACKGOUT 3D Printing Pen and copies (from $39)

        PACKGOUT 3D Printing Pen prints PLA and ABS plastics. It is possible to adjust the temperature. In addition to standard features, this model has an interference detection system that prevents material from getting stuck in the nozzle. Another feature - the device is very quiet and goes into standby mode after 5 minutes of inactivity. All settings are displayed on the built-in LCD screen.

        Features:

        • Very quiet operation
        • Easy to use
        • Not suitable for children (hot tip)
        • One year warranty when purchased from official suppliers
        • Uses FDM 3D printing technology (PLA and ABS plastics)
        • LCD screen displays material, tip temperature and print speed
        • Unclogging mechanism
        • Filament jamming detection
        • Feed speed slider
        • Sleep mode after 5 minutes of inactivity
        • Market value of PACKGOUT and copies: $39 – $80

        MYNT3D Professional 3D Printing Pen and copies (from $50)

        MYNT3D Professional 3D Printing Pen is a simple and easy to use 3D pen that uses FDM printing technology. The OLED display shows the material used and the tip temperature. By the way, the temperature is adjustable in 1-degree increments between 130 and 240°C. The side slider allows the user to adjust the material feed speed. The other two buttons are responsible for the supply of material and its loading. Double pressing the feed button activates the automatic material feed mechanism. Removable tip.

        Features:

        • Lightweight (40 g)
        • Easy to use
        • Not suitable for children (hot tip)
        • Uses FDM printing technology (PLA and ABS plastics)
        • Detachable nozzle
        • Has a slider to adjust speed
        • Buttons for material loading and feeding (including automatic feeding mode)
        • Temperature setting in 1° increments between 130 and 240°C
        • OLED screen displays material type and tip temperature
        • Average price of MYNT3D and clones: $50 – $70

        MorphPen Professional 3D Pen ($50)

        MorphPen Professional 3D Pen is one of the representatives of "slim" (thin) 3D pens. Very ergonomic and comfortable design. You can print with PLA or ABS plastics. There is one button for material supply and LCD screen. You can use the Power Bank for power. Of the additional useful "features" - a mechanism for automatically switching to sleep mode.

        Features:

        • Easy to use
        • Not suitable for children (hot tip)
        • Uses FDM 3D printing technology (PLA and ABS plastics)
        • LCD screen shows tip temperature
        • Automatic standby
        • Average price Pen: $50

        Smarson 3D Printing Pen ($51)

        Smarson 3D printing pen is another good model. There is an LCD screen that shows the current temperature of the handpiece. Next to the display there are buttons for adjusting the temperature. There are buttons to adjust the material feed speed. During heating, the red LED flashes. When the required temperature is reached, the blue LED will light up. This means that the pen is ready to print. The basic set includes the 3D pen itself, a power supply, a stand and PLA plastic in four different colors.

        Features:

        • Lightweight
        • Easy to use
        • Not suitable for children (hot tip)
        • Uses FDM printing technology (PLA and ABS plastics)
        • Adjustable speed
        • Built-in red and blue LED is the 3D pen ready to use?0017

          NEXTECH Intelligent 3D Printing Pen, uses FDM 3D printing technology. It can print PLA or ABS plastics and even materials with wood additives (Wood filament). Ergonomic, lightweight device. The manufacturer claims that the special design of the tip allows the material to cool faster. There are buttons to adjust the material feed speed. Temperature adjustment is provided. The temperature is displayed on the LCD screen. After one minute of inactivity, the device goes into standby mode.

          Features:

          • Quality assembly
          • Ergonomic design
          • Light
          • It is easy to use
          • (hot tip)
          • FDM printing technology (PLA and ABS Plastic, Materials with Dereva)
          • Media Feed and Load Buttons
          • Speed ​​Adjustment Buttons
          • Built-in LCD Temperature Display
          • NEXTECH Average Price and Copies: $71 – $89

          Yingjia 3D Printing Pen ($96)

          Yingjia 3D Printing Pen - Powered via USB cable. As in most of the pens presented above, there is an LCD screen that displays the current temperature of the tip. The temperature is adjusted in 1 degree increments. The buttons for setting the temperature are located next to the LCD screen. The material feed speed is adjustable. The 3D Pen enters standby mode after 5 minutes of inactivity.

          Features:

          • Very quiet
          • Portable
          • Easy to use
          • Not suitable for children (hot tip)
          • Used FDM 3D printing technology (PLA and ABS plastics)
          • Feed speed adjustable
          • temperature displayed
          • Temperature adjustable in 1 degree increments
          • Powered via USB cable
          • Switching to standby mode after 5 minutes of inactivity
          • Average price: $96

          3Doodler PRO ($249)

          3Doodler PRO is the top model from 3Doodler. The manufacturer has worked out the design of the nozzle and as a result this pen can print not only with standard materials like ABS and PLA plastics, but also with polycarbonate, nylon, materials with wood and metal additives. Nozzle sizes 0.5 mm, 1 mm and 1.5 mm. The shape of the hole is also different - there are square, triangular and round.

          Temperature and material feed speed are adjusted using knobs on the end of the 3D pen. The current temperature and material feed rate are displayed on the built-in LCD screen. There is a built-in cooler, the rotation speed of which is also adjustable.

          In general, 3Doodler pro is a very high quality, thoughtful model that is really worth the money.

          Features:

          • Portable
          • Easy to use
          • Primary target audience - professionals
          • Not suitable for children (hot tip)
          • Uses FDM 3D printing technology (wide range of materials - PLA, nylon, metal0,2)
          • LCD displays temperature and print speed
          • Print temperature and print speed knobs
          • Adjustable print speed
          • Powered by AC adapter or batteries
          • Average price: $249

          LIX Pen ($149)

          the world. " This is a 3D pen that won the Design Intelligence Award and measures just 6.54 inches long with a 0.55 inch diameter. There are two buttons for adjusting the material feed speed. The kit comes with an external power supply, one pack of ABS plastics in different colors and one pack of PLA plastics in different colors. Based on the information on their website, shipping will take 2-3 weeks. Stores like Amazon don't have this model yet.

          LIX 3D pen hit the market thanks to Kickstarter. 8.030 backers allowed to accumulate the amount of 731.690 £. This 3D pen is marketed as “a professional tool that is easy to use and will take your creativity to the next level.” But before buying, we recommend that you read the reviews on Kickstarter: it seems that not all buyers are happy...

          Features:

          • Portable
          • Easy to use
          • Interesting design and form factor
          • Designed for professional use
          • Not suitable for children (hot tip)
          • Uses FDM printing technology (ABS and PLA)
          • LED screen displays temperature and media feed speed
          • Temperature adjustment knob
          • Average price: $149. 95

          3D Pen

          • 1 Description
          • 2 History
          • 3 Design
          • 4 Materials
          • 5 Application
          • 6 Development
          • 7 Interesting 3Dtoday blog posts about using 3D pens:
          
          

          Description

          FDM printing is the logical evolution of CNC machines. The only fundamental difference was the use of a specialized nozzle (extruder) for melting and feeding plastic. By the same logic, hot glue guns, which are widespread in everyday life, have also been developed. The use of thermoplastics instead of thermoplastic adhesives allows devices like these, dubbed 3D pens, to be used as hand-held additive manufacturing devices.

          Parts of the future model can be drawn on paper using templates and glued together

          History

          One of the latest developments is the Dim3W 3D pen

          The pioneer of a new direction in 3D printing is the Wooodleworksr pen.

          The team turned to Kickstarter to raise the funds needed to bring the project to life.

          With a $30,000 goal, Wobbleworks had raised over $2 million by the end of the campaign, indicating strong public interest.

          Amid the success of 3Doodler, a competitive wave swept through. At the moment, the range of 3D pens includes actual 3Doodler clones like 3DYAYA or SwissPen, as well as more original designs including Dim3W and LIX.

          The basic principle of operation of all these devices is the same, but there are some design features aimed at improving a fairly young concept.

          Design

          In essence, a 3D pen is nothing more than a manual extruder. The user himself acts as the CNC of the machine.

          3Doodler disassembly. The nozzle at the bottom and the pull mechanism in the middle of the handle are clearly visible. and heating element.

          Since almost all software functions of 3D printers are performed by the user, 3D pens do not require a connection to a computer or the creation of digital models. Only a power supply is required - as a rule, conventional power supplies with a 12V voltage converter are used.

          As with FDM printers, it takes a few minutes for the nozzle to heat up, after which the pen is ready to print. The supply of material is carried out by pressing the corresponding button. Some models, such as the Dim3W, are equipped with a print speed control.

          Also available with reversible feeder. This feature allows you to quickly remove the plastic filament from the pen and replace it with a different color material.

          Materials

          3Doodler complete with colorful ABS plastic packs

          Two of the most popular plastics in FDM 3D printing are currently used as materials for 3D pens - ABS plastic and organic, biodegradable polylactide (PLA plastic). Theoretically, it is possible to use other materials - polycarbonate, nylon, etc. At the same time, existing models do not provide the ability to accurately adjust the nozzle temperature, which is important when switching to other materials. Temperature characteristics are embedded in the firmware. In the future, we can expect more variety in the range of materials and the ability to fine-tune the temperature if there is a corresponding demand.

          Like full-fledged FDM printers, 3D pens use thermoplastic filaments with a diameter of 1.75 or 3mm. For ease of use with the pen, the threads are usually supplied as scraps rather than spools, but it is ultimately up to the user to choose.

          Applications

          Similar voids formed during plastic delamination due to uneven cooling can be filled with a 3D pen

          3D pens are positioned as a means for creative work, three-dimensional drawing. Although devices can indeed fulfill such a role, creating more or less decent-looking models requires serious skill.

          However, initially 3D pens were conceived for a completely different purpose, similar to the purpose of their ancestors - hot glue guns. It's about repairs. The fact is that some types of plastics used in FDM 3D printing (for example, the very popular ABS plastic) have a high degree of shrinkage and a tendency to deform during uneven cooling. All this often leads to cracking of the manufactured models. 3D pens were supposed to be a tool for manually repairing printed models. These devices allow you to fill in missing layers or faults.

          Particularly good results can be achieved by careful treatment of cracks with acetone, which dissolves ABS plastic. The surface softened in this way will adhere well to freshly applied plastic with a 3D pen.

          3D pens allow you to draw in the air instead of paper

          The surface of the repaired area can be leveled by sanding and gently working with the same acetone. Similarly, household products can be repaired - many of them are made from the same ABS plastic that has become widespread in the industry.

          As for artistic applications, 3D pens will appeal to those who love to draw and want to move from 2D sketches to 3D physical models.

          The main difficulty lies in purely human limitations - any unwanted hand movement will affect the quality of the model, especially when drawing the model "in the air".

          One interesting way to improve the quality has been to divide the models into their component parts, using sketches on paper as templates. Finished parts are simply glued together.

          BioPen allows surgeons to “paint over” damaged areas of bone or cartilage tissue, contributing to its restoration

          This method is quite possible to make a good reproduction of the Eiffel Tower.

          Of course, the method is applicable only when creating parts of models with relatively flat surfaces.

          Very promising is the possibility of using a variety of 3D pens in medicine.

          Devices called "bio-pens" (BioPens) are being tested as tools for applying live cell layers mixed with biopolymers that act as support matrices and contain essential nutrients.

          The original 3D BioPen was developed by Australian scientists at ASEC and is designed to repair cartilage and bone tissue.

          ---

          Learn more

          • 
            3D print conductive filament
          • 
            Profitable 3d printing
          • 
            Best budget 3d printer kit
          • 
            Best glue for pla 3d prints
          • 
            Things to know before buying a 3d printer
          • 
            3D printers aliexpress
          • 
            Coffee 3d print
          • 
            3D scanner buy
          • 
            Meld 3d printing
          • 
            Game of thrones dragon 3d print
          • 
            Hic 3d printer instructions