Profitable 3d printing

How to make money with a 3d printer?

How profitable is 3D printing?

But first, let's answer this question. Can you really make money with a 3D printer?

The answer is yes and no. It depends on the niche that you serve. If you're 3D printing for the general consumer, then your profit margin might not be high because it's for personal use. Consumers love cheap stuff. You'll barely cover your cost because of the amount of labor required to finish just one job. But if you're serving clients where 3D printing solves a costly problem that they have, then they are more willing to pay you a lot more to solve it for them.

Here's what we mean by that.

Scenario A: Joe is looking to 3D print a door handle because his door handle broke.

Scenario B: Amanda is looking to 3D print a prototype of a product she plans to sell on Kickstarter.

Believe it or not, we get a lot of Joe's looking to get a quote for their missing appliance part. And most of them are surprised by how expensive 3D printing is and why can't it be as a cheap as Amazon!

We turn them away. Cheap clients are not worth your time.

Best entry level 3D Printer

Don't have a 3D printer already?

Phrozen Sonic Mini 4k 3D Printer

Check out this Phrozen Sonic Mini which is very popular among 3D printed miniatures enthusiasts.

$349.99 from Phrozen3D

Commisions earned

Different ways to make money with 3D printing

We've listed a couple of ways you can make money with a 3D printer. Some of these ideas are really good, some of them are bad. But we're listing them any way and it's up to you to make that decision if it's even worth considering.

Let's dive right in!

1. Sell pre-made 3D prints on Etsy

Etsy is one of the biggest marketplace for 3D printing. A lot of 3D printing hobbyists and even professional gravitate towards Etsy because of its large audience who are into handcrafted stuff. Some of them have even made a name for themselves on Etsy, whether that's selling pre-made items with a little bit of customization or selling full on 3D printed objects.

When we were starting out back in 2016, we were the first ones to start selling 3D printed planters. Made boatloads of money but ultimately had to stop because of copyright issues. But also partly, because it wasn't where we imagined company .

Remember how we said cheap clients aren't worth your time. On Etsy, you will encounter a lot of cheap clients.

Pros

Quick way to validate your 3D printing idea
Benefit from Etsy's huge audience
Running ads are cheaper compared to Google

List of 3D printed products that you can sell on Etsy:

D&D miniatures
Planters
Vase
Freezing Bernie

How do you choose which products to sell?

On Etsy, you will see a lot of people selling different variations of the same thing - planters, iphone holder, headphone holder, etc.

Why?

Because these things sell!

Like it or not, Etsy will be full of copycats and originality doesn't matter. If your product sells, people will copy it. (And vice versa)

How can you stand out on Etsy?

There's a lot you can do to stand out, but here are some of the common ones that we hear over and over again.

Offer something unique that differentiates your product. Whether that's offering higher quality 3D print (resin), custom finishing, etc.
Avoid competing for price. It becomes
Ask your happy clients to leave a review
Take high quality product photos

2. Offer a specialized 3D printing

This comes down to finding a niche that you're comfortable to work with or if there's enough margin for you to be profitable.

Here's a list of niches you can offer your 3D printing services to:

Tabletop Miniatures
Toy Designers
Jewelry Designers
Architecture firms
Engineering firms for prototyping services

Pros

You can standardize your process
Repeatable business
Easier to master one industry than be a jack of all trades
You can become a known expert in that industry

3.

Start a 3D printing business in your local area

We'll start off by saying that starting a 3D printing business is the most difficult thing to do out of all the other ideas on this list.

Pros

Potential for high profits
Local advantage over online only 3D printing companies

We were fortunate that we were located in NYC, where there is huge demand for 3D printing, and that we started in the early days when 3D printing was still new.

We're not saying this because we don't want you to compete with us, but we're saying this because we want you to know the risks involved in the 3D printing business. Many 3D printing companies have gone out of business because they could not make a sustainable profit to keep the lights on.

The amount of work that you have to put in on fulfilling custom orders is a lot. If you don't opt for an automated system, you end up doing a lot of back and forth with clients. And if you do opt in for these instant quoting systems, you can get a lot of low end jobs and lose out on clients with a very custom need.

The real money in offering a 3D printing service, especially if your a small business, is if you can differentiate yourself from merely becoming a commodity.

For us, we had to become more than just a 3D printing service. It sounds corny, but that was the reality. We had to offer other services that would add value to 3D printing. For example, a marketing agency came to us for 3D printed trophy in 24k gold. But we know that we can't 3D print gold. We can either tell them to take it to a metal plating shop or we can do it ourselves and charge on top of it.

We can charge a lot more because:

We're taking all the risk. If that metal plating fails, we have to 3D print again.
We're making their lives so much easier by being an expert at this field.
And if they're on a really tight deadline, we can charge even more because we're guaranteeing results.

Clients who care more about their time and results are willing to pay you a lot if you can deliver.

So we've partnered with a local metal plating company and later on started offering metal plating services for 3D printing.

Having capabilities more than 3D printing will allow you to charge more than just the 3D print by itself.

Whether that's painting, or creating molds. Whatever it is, you need to find the right clients.

Bonus: Offer 3D scanning services

3D scanning and printing services are perfect way to increase money you can make from owning 3D printer. Although this would require buying a 3D scanner, it's a good option to think about when increasing your chances of landing a 3D printing client.

4. Sell your 3D printing designs

Making money with 3D printing isn't only limited to running your 3D printer 24 hours a day. You can also make money from selling 3D models!

This might be hard if you don't have any design skills. You can either learn or hire a designer on Fiverr or Upwork.

Pros

You can make money while you sleep
More scaleable than running a 3D printing business

Patreon Business Model

Here's how it works. People pay you an X amount every month for you to publish 3D models for them.

This business model is very popular among the tabletop miniature community.

The above picture is from LordOfThePrint's Patreon. They're one of the popular designers focused on building 3D designs for tabletop gaming. They currently have 1,933 subscribers as of this writing. Assuming only 5% of that is merchants, (about 100) that's $3,866 of monthly recurring revenue!

Take this WallStreetBets 3D model by ChaosCoreTech for example. We spent $50 to have the rights to sell their design for a month. Imagine having 10 Etsy sellers wanting to sell your 3D model. That's have $500 of passive income every month for a few hours of design work!

Merchants/Etsy sellers are great target to sell your 3D models to because:

They'll use it to make more money
They know that your 3D model would print properly because you also know how to 3D print. You might also include supports to make it easier for them
You can show them how it would like 3D printed, thus, making it even easier to sell.

Marketplace Business Model

Some prefer to sell their designs as one-off product that people can just buy online without having to subscribe monthly.

Places where you can sell your 3D models

MyMiniFactory
CGTrader
TurboSquid

5. Start a YouTube Channel

We know that this is easier said than done. Creating content requires time, effort and consistency. With the amount of 3D printing related youtube channels out there, it might be hard to stand out.

But we're not here to stop you from starting your own channel. We're just here to tell you that you can make money with it.

Pros

Potential for high earnings
You can use your audience to make more money aside from YouTube Ads

6. Sell an online 3D printing course

If your confident enough with your 3D printing skills and you have knack for teaching others, then selling an online course about 3D printing can

What should you teach?

Again, you need to find a problem where people are willing to pay money for. If you search "3D printing" on Udemy, you'll find 3D printing courses that people are paying for.

It doesn't have to be "how to operate a 3D printer", it can be a course on "how to operate a profitable 3D printing business". With this strategy, you'll attract clients who are willing to pay money to make more money.

Pros

Passive income

The following ideas are not so good

So you can probably skip to the end if you wish to.

7. Rent your 3D printer for events

With the pandemic and all, this is probably not a good idea. But it's still an idea right?

The business is very similar to a photo booth. A bar mitzvah will hire you for 3 hours to 3D print keychains for them.

But 3D printing takes a long time. They are going to complain that you didn't 3D print for everyone.

Yup, bad idea.

8. Sell your 3D printer

You can quickly make money if you sell the 3D printer you just bought. Guaranteed.

All jokes, aside

9. 3D print the word "money"

You will literally make "money" with a 3D printer with this strategy.

In summary

Yes, you can make money with a 3D printer. And there are a lot of ways that you can do it, whether that's selling 3D printed items, digital goods, or even offering a 3D printing service in your local area. Is it easy to make money 3D printing? It's not. You still need to work hard(and smart) to become successful in the 3D printing business.

11 Ways to Make Money 3D Printing in 2022 – Clever Creations

Our site is reader-supported. When you buy via the affiliate links on this site, we will receive a commission at no cost to you. All opinions remain our own. Learn more

Ever wondered about turning your 3D printing hobby into a profitable business venture? We’re here to tell you that there are several ways to make money with 3D printing even as a beginner.

In this guide, we’ll examine the best ways how to make money with a 3D printer, which 3D printing services are most in-demand right now, and what you need to know about running a 3D printing business before you get started.

Best ways to make money with a 3D Printer in 2022

1. Design and sell 3D prints

If you want to design, print, and sell your own 3D printed items, there are a few different ways to do it. For example, you’ll need to decide if you want to stick with a set of specific designs or if you want to work on commission.

Personalized or custom items mean you have to make a new 3D model for every order. Offering only pre-designed items allows you to make items ahead of time and ship them out as needed.

There is a market for nearly every type of 3D print you can create, so choose the types of items you enjoy making. After you have decided that, figure out where the customers for those items like to shop so that you can offer your products there.

What can I make and sell with a 3D printer?

In terms of the things to 3D print and sell, your products can be anything from planters to phone cases to home décor items. Ideally, the products you sell line up with your own passions while still being in high demand from your target audience.

Some of the most popular things to make and sell are:

(D&D) miniatures. 3D printed miniatures are very popular at the moment. Unlike store-bought miniatures, these can be fully customized to your customers’ liking. You can also paint the miniatures before shipping them out, but many customers don’t mind painting minis for themselves, or they leave them unpainted altogether. When doing this, we recommend you use a resin 3D printer for miniatures.
Jewelry. 3D printed jewelry can be sold at a high mark-up and for more money than other items, but there is a lot of competition in this niche on sites like Etsy. For 3D printing jewelry, a resin 3D printer (or even a high resolution 4K+ resin 3D printer) is ideal.

Image: xfanta via MyMiniFactory

There is a lot of demand for 3D printed jewelry

Cosplay items. Creating and selling cosplay items can be a profitable endeavor. 3D printing helmets, 3D printing armor, or all kinds of other props are valid ways of making money with a 3D printer.
Planters. Attractive self-watering planters aren’t always easy to find in retail stores. That is one of the reasons why they are popular things to 3D print.
Toys. Toys are easy to make on FDM printers and barely need any post-processing.

These are just a few examples, but the list is practically endless. Think key chains, customized shoes, personalized crafts, or other one-off items. You can sell designs of others (if the copyright license allows), or create your own designs and your own products.

Where to sell 3D prints?

There are many platforms you can use to sell your 3D printed items and make money with a 3D printer, both online and offline. Most sellers choose a few different platforms for selling to reach a variety of markets and audiences, as well as to bring in more money.

While it’s important to not limit yourself to one sales channel, you should also be careful not to spread yourself too thin.

Offline

You have several choices for selling your 3D printed items in person. Events like craft fairs, trade shows, garage sales, and festivals can all give you the opportunity to show off your 3D prints and gain customers. If you have access to electricity at the event, setting up your printer in your booth can be an easy way to attract people to your table.

You can also put your 3D printed items into consignment shops or set up a display in local businesses. This gives your 3D printing business local exposure without committing to a storefront.

Online

To reach a large and varied global market with your 3D printed items, you should sell online. You should ideally have your own online store at some point. In the meantime, there are several eCommerce platforms that can help you get started:

Etsy
eBay
Amazon
Fiverr

2. Start a local 3D printing business

Starting a local 3D printing business is one of the quickest ways to get customers and generate sales. You can manufacture custom parts, tools, and necessities for other local businesses. This is especially true if you live around several factories or plants. You can reach out to your local bakery about cookie cutters, or make trophies or awards for events.

Recommended:

The 5 Best 3D Printers for Making Cookie Cutters

The list goes on. You will be surprised by how much you can contribute to your local community once you just start asking. If you are wondering how to make money with a 3D printer, this option offers you lots of potential.

While opening your own business sounds complicated, it’s a rather straightforward process. You should contact your local authorities or city council to double-check the ordinances. You may find that you won’t need any permits or zoning updates to run it from your house. That depends on where you live and how your local laws are set up.

What do you need to start a 3D printing business?

3D printer

It goes without saying that if you want to start your own 3D printing business, you need a 3D printer. In this case, it should be a reliable 3D printer that you are already familiar with and have a stock of spare parts for.

You don’t want to start taking requests from customers and have to cancel their orders a week later. Things like this happen when you’re waiting on a replacement part or because something basic went wrong and you don’t know how to fix it. Be prepared with basic troubleshooting knowledge of your machine and backup components before you start.

You don’t need a top-of-the-line printer to offer your 3D printing services. However, you should aim to have a properly working and time-efficient one. Every minute that you spend re-leveling your build plate because your printer falls out of alignment is a minute that you have to account for through higher printing fees or lost maintenance costs.

Going with a 3D printer under $1000, like the reliable Prusa i3 MK3S, is a good way to save yourself time.

On the other hand, if you decide to go with a budget 3D printer, like the Ender 3 V2, you can make use of the many Ender 3 upgrades that turn it into a more time-efficient machine. One example of this is the BLtouch leveling sensor, which removes the need for manually leveling the build plate.

Business website

You need a website to inform your potential customers about your 3D printing business and to capture leads. You should have this set up by a professional web designer if possible. This will be your main touchpoint for customers to interact with your brand. As such, you want it to look good and reputable to bring in those early clients.

You should also contract a graphic designer. They will make your logo, company palette, and other branding materials. Your web designer will need them to keep your website design on-brand.

Some web designers can do both (and vice versa). Just be sure that they have a strong foundation in branding if you choose to use one person for everything.

You can go as basic or complex as you would like with your final website design. It depends on what types of services you plan to offer and how much of the pre-purchase and buying phase you want to happen online.

Premium add-ons like an online store, quote generator, appointment scheduling app, and other tools add value to your end customer. They will cost you more money in upfront design charges since they may require adding a web developer to your project as well.

3. Design and build prototypes

Using your 3D printer to design and build your own (or someone else’s) product prototypes is a great way to monetize your machine. For other people’s prototypes, you can charge them for designing and building them. For your own prototype, you can send it into production and have your own product line thanks to your 3D printer.

4. Rent out your 3D printer

Many people love the idea of 3D printing but don’t have the time, space, or money to buy their own printer. Or sometimes they just need the occasional niche print and don’t think it’s worth it to buy their own machine.

That’s where you and your 3D printer rental services come in! You can charge customers a fee for a printing service where you print their models on your printer. Doing this during your 3D printer’s usual downtime lets you make money 3D printing in moments where you don’t need to use the machine for yourself.

This seems like one of the easier options on this list to try. However, print on demand does have some complicated elements to consider. You have to be properly compensated for all time and materials involved.

That includes the cost of your time spent leveling and maintaining the printer (as well as the cost of wear and tear on your machine from additional usage). Keeping in mind the 3D printer’s electricity usage and other 3D printer costs is important too.

For your 3D printing service, you also need to consider if you will honor requests for certain colors of filament, what types of filament potential customers can order, and if you will also include services for post-processing for a fee.

Image: Mtar Einbern via MyMiniFactory

Post-processing can also include painting

5. Sell digital 3D models

If you’re a skilled modeler, sculptor, or drafter, you can forgo the necessity for physical products and sell your 3D model files online. This option is more of a passive income business model that can work beside or be independent of a physical product line.

Selling digital files like 3D models lets you make money on one product several times without having to make the item more than once. It becomes even more efficient if the digital files you sell are existing assets from another project that weren’t used anymore and would otherwise have no value.

While you won’t be making money in large sums per sale for 3D models, they can still earn a higher lifetime revenue than a print and sell option of the same model. Digital files simply sell with more regularity than physical objects and have no production cost associated with each extra copy sold.

Where to sell 3D model files

The first place you should consider selling your 3D models is on your own website. If you already have one of those for your local 3D printing business, excellent. If not, start looking for a web designer ASAP.

Third-party platforms charge fees to use their services. Having your own eCommerce site ensures that you get a larger percentage of profit from each sale and increase the money you make 3D printing. The downside to this is that you have to build your audience and website traffic yourself. Most third-party eCommerce platforms bring their audience to you.

Some of the best places to sell your 3D models are:

Etsy
MyMiniFactory
CGTrader
Cults3D

Image: DarkFigurines via MyMiniFactory

3D models are loaded into a slicer program to generate instructions for the 3D printer

6. Start a YouTube channel

You can use your 3D printing knowledge to set up your own YouTube channel. Build your audience by posting cool and helpful 3D printing YouTube videos to your channel.

It is possible for you to earn revenue from ads, donations, affiliate programs, and brand sponsorships. If you get a large enough following, companies might also send you free products to review.

You most likely won’t make a full-time living from YouTube (especially at first). However, if you grow it as one of several monetization strategies, it can be helpful. It’s a great way to push potential customers to your website or online shop. It can also help develop your name as a knowledgeable person in the industry.

7. Start a blog

You can use a blog to write 3D printer-related content and share your knowledge with others. Like YouTube, you can monetize the content on your blog through ads, affiliate programs, and paid sponsorships. Having a blog gives you more control over the creative process. You also make a lot more from ads on your website than YouTube pre-roll ads.

You can also use your blog as a way to bring readers to your website where you sell your prints, 3D model files, and other products. Your blog content acts as a verification that you know what you’re talking about on the subject of 3D printing.

It shows that you can be looked at as a trusted source. This is called brand authority, and it makes it much easier to convert an audience member into a customer when they already trust what you’re saying.

8. Repair things in your household

A 3D printer is a great tool to have around when something in your house breaks. With basic computer-aided design (CAD) knowledge and (free) 3D modeling software, you can design replacement parts for broken appliances, furniture, and so on.

Normally when something breaks, you have to order a new part from the manufacturer. You potentially have to replace the entire thing if the manufacturer can’t help you. By doing basic repairs, 3D printing your own replacement parts, and keeping your old belongings in functional shape, a 3D printer helps you save money over time.

9. Repair 3D printers for others

There is no denying that 3D printers can be a bit temperamental sometimes. They have a large number of parts to make them operate the way they should. If someone is new to 3D printing or never learned what most of those components are meant to do, they will struggle to fix it when something goes wrong.

Put your technical 3D printer knowledge to good use and offer to fix broken printers for a fee. Most people will be happy to spend money to let someone more capable deal with it. You get paid work from a person who was likely never going to use your 3D printing services or buy your products.

10. Flip broken 3D printers

If a 3D printer is broken badly enough that the owner doesn’t want to fix it, you can still salvage it by fixing it up. After you have repaired it, you can then resell it for a profit. You can also keep it for spare parts for another 3D printer and sell that one afterward.

11. Offer 3D printing courses

If you’ve been 3D printing for a while, you probably know quite a bit about the subject. Consider using that knowledge to create an online course or series of online courses that teach new 3D printing enthusiasts the basics.

It will be a big initial investment of your time to plan the course, film it, edit it, compile it, and market it. However, you can continue to sell the course for years to come while doing little to no maintenance work on it.

You can host the course through an online learning platform like:

Skillshare
Udemy
Domestika
Teachable

You can also host it through your website if you have one (and use your blog to help market it.)

Frequently asked questions

Can you make money with 3D printing?

Yes, there are many ways you can start making money with a 3D printer. Selling 3D prints (like phone cases) or offering 3D printing services are some of the most popular methods, but there are many more you can choose from.

Is it legal to sell 3D prints?

As long as you follow the copyright license on any 3D model you use, you are legally allowed to sell 3D prints of the model. For any models you design yourself, you are the license holder, so you can use the models freely.

If any of the models depict copyrighted or trademarked content, that overrules the designer’s license. For example, if someone designed a 3D model of a well-known cartoon character, they still cannot sell prints of it because the character is not their intellectual property.

Image: edoyola via MyMiniFactory

Always check whether the objects you 3D print are copyrighted or not

Is 3D printing a good side hustle?

Yes, 3D printing is a great side hustle if you already know a lot about the subject. If you are brand new to 3D printing and are trying to jump into starting a business with it from day one, it might be a frustrating experience.

Taking some time to learn your 3D printer, understand the settings, and be able to troubleshoot the most common issues are going to be very helpful in the long run. It will also ensure that you don’t guarantee your 3D printing service to someone before you are able to render it.

3D printing is also not much different than beginning any other side business. Starting a 3D print store or print-on-demand service requires niche market research, marketing, social media skills, and some understanding of business management. Those are all skills anyone can and should learn to increase how much money they make with their side business.

How long does it take to start making money with a 3D printer?

That depends on a few different factors. If you are trying a few of our suggestions on how to make money with a 3D printer, your chances of quickly connecting with new customers are higher than if you only stick to one method or sales platform.

How quickly people buy from or contract you also depends on having things like:

A professional-looking website
Clean and effective copy on your website and product listings
High-quality pictures of your products
Well-defined policies for shipping, returns, customization, etc.
Good pricing (that doesn’t mean fighting to be the lowest)
Accurate market research and a good strategy for your business

Not all of these factors have to be a slam-dunk every time. Online shops with terrible pictures make sales every day, while some with professional product photography do not. People stumble onto products by accident every day, even if their marketing strategy is abysmal. These are just some things that may color your timeline for profitability.

How long does it take to learn 3D printing?

If you have a plug-and-play 3D printer that is designed to set up and start 3D printing almost instantly (note that these are usually the more expensive machines on the market), you can start getting serviceable prints within a day.

Cheaper and more hands-on 3D printer models have a steeper learning curve and take more time to become adept with. Many of the tasks that plug-and-play printers do automatically are manual on budget printers. It will likely take you a few days to start producing quality parts. It will take a few months to have a firm understanding of all the 3D printer’s elements.

As far as being able to make your own 3D models, those skills are considerably more time-consuming to learn. You can make very basic models within a day or so by following tutorials. However, it can take months or even years to become a skilled designer who creates original and aesthetically pleasing 3D models.

Do you need a license to 3D print?

Anyone with access to a 3D printer can print 3D models for non-commercial uses. However, the rules are slightly different when you intend to sell the finished product. Any models used need to have a commercial use license.

That means only choosing ready-made models online that have the proper license. You can also contact the designer to inquire about obtaining commercial rights. Many designers are willing to charge you a licensing fee in those situations, but some will still refuse. It’s important to be respectful either way.

What software do I need?

To start 3D printing, you need a 3D modeling program and a slicer program. The 3D modeling software lets you create 3D models to print, while your slicer turns your models into lines of code that your 3D printer can read.

For help picking out a 3D modeling program, we have an in-depth comparison between the best free modeling software options.

Is 3D printing expensive?

The expenses of 3D printing depend on several factors. These include what type of material you use, what type of 3D printer you have, if you keep your printer well-maintained, and how you store your materials.

Paying attention during 3D model slicing and set up can cut down costly or wasteful mistakes. Keeping your 3D printer clean and lubricated extends the life of its parts. Storing your filaments or 3D printer resins away from moisture and light will extend its working life and help you save money.

Conclusion

There are several options to make money 3D printing, which means there is something suitable for everyone. Do you make money with a 3D printer? What do you find most challenging about running a 3D printing business or side hustle? Let us know in the comments!

Scroll to Top

How to start a business in the field of 3D technologies

Analytics and business

Experts recommend

Author: Semyon Popadyuk

5 Rapid Prototyping Center Services | Economic solution: 3D wax printing | Photopolymer 3D printers: durability and perfect quality | Full color plaster models | To sum it up: business ideas that make money

In the late 1980s, when additive methods began to be commercialized, the concept of a “rapid prototyping center” (RP center) appeared - an enterprise that provides services using 3D equipment. Today, 3D technologies are a reliable production tool that has proven itself in various industries, and with the development of the 3D market in Russia, such a service is becoming more and more in demand.

iQB Technologies and our partner TWIZE have a clear and complete understanding of what tasks can be solved with the help of 3D printers and 3D scanners in various industries.

Dmitry Podkovyrov, head of TWIZE, a company specializing in 3D services

Today we want to share our experience in providing services based on the TWIZE rapid prototyping center and give specific recommendations to entrepreneurs on how to successfully develop such a business from scratch.

In this article, we will give the floor to the head of TWIZE, Dmitry Podkovyrov, a specialist with extensive knowledge and experience in the development of unique ready-made 3D solutions. The advice of our expert is a kind of business key that will help you calculate the possibility of creating a commercial project and start earning on the benefits of advanced technologies.

Would you like to become our partner? Learn about the benefits and contact us at the link.

5 services of the rapid prototyping center

The TWIZE RP center is located in a 150 sq. m, divided into several zones - 3D printing, post-processing, 3D scanning, there are also showcases with samples of work.

Basic services of the RP-center:

3D printing;
3D scan;
3D modeling;
layout;
interactive 3D presentations.

Accordingly, the center's staff includes specialists in each of the 3D printing technologies, 3D scanning and 3D modeling.

In addition, we introduced a new term “3D-sharing” (similar to car sharing, etc.). We have a lot of expensive equipment to solve a wide range of production tasks. If a client is planning to buy a 3D printer or 3D scanner, we suggest that we first test the solution to a particular problem in our small production area. Of course, the budget for conducting pilot tests is incommensurable with the cost of equipment, so 3D-sharing is one of the promising strategies for a profitable business.

Do you need to print a layout, prototype or casting master model? We carry out orders for 3D printing with plaster, wax and photopolymer using equipment from leading manufacturers! Ask a question or submit an online request:

Order service

Economic solution: 3D wax printing

Wax 3D printing is a profitable choice for those who provide prototyping services. Creating wax models on a 3D printer provides foundries with undeniable advantages in terms of time and cost savings. First of all, this applies to jewelry enterprises, since a 3D printer is ideal for printing small items of complex shape and transferring the smallest details.

The manufacture of waxes by milling is considered the highest quality, but this is a very long and expensive process. On the machine, in four hours you can make one ring wax, and a 3D printer can print a hundred models in the same time.

You can order wax 3D printing services from us, and test printing is free of charge. Almost every day we have new customers, and the printer works around the clock. Having tried wax 3D printing once, customers begin to use our services constantly.

Case study: 3D wax printing of jewelry

Task: to make wax figures of elephants on a 3D printer.

Solution: creation of 3D models and 3D printing of wax models, post-processing and preparation of products for jewelry injection molding.

Photopolymer 3D printers: durable and perfect quality

One of the most promising and widespread 3D printing materials is photopolymers, which can be used to create products with completely different properties and mechanical characteristics. Of all additive technologies, laser stereolithography (SLA) provides the highest model strength and one of the best accuracy rates. In addition, objects made of photopolymers have an ideal surface quality, and the printed prototype can be used as a finished product.

In the RP center, we use a high-quality and cost-effective SLA-printer SLA600 DLC from the Chinese company ProtoFab. ProtoFab machines provide high precision and detail and are great for prototyping, tooling, and burnout master models.

iQB Technologies experts recommend an article: 9 products that are more profitable to make on a photopolymer 3D printer

Case study: 3D printing car headlights

Task: to create a car headlight housing with an external mounting frame in the shortest possible time.

Print time: 5 hours

Solution: 3D printing of a photopolymer model.

Full color plaster models

Another popular type of 3D printing is gypsum. We print models with gypsum composite, getting realistic color models with high resolution. Accordingly, the main practical problem solved with the use of gypsum printing is prototyping. The customers of the layouts are various architectural and construction organizations, educational and medical institutions. RP-center iQB Technologies sells a comprehensive turnkey service - a mock-up, a mock-up, a protective dome made of plexiglass and a transport case.

Practical example: model "Microdistrict Krymsky", Novosibirsk

Task: to make a model of the microdistrict according to drawings, sketches and photographs for demonstration to potential buyers of apartments.

Solution: based on the data provided by the customer, 3D models of all architectural structures and landscaping elements were created. Playgrounds, basketball court, benches and street lights are made of photopolymer, as this 3D printing technology allows you to display the smallest models in high quality. Layouts completed.

The second area of gypsum 3D printing is the production of corporate souvenirs. So, recently we took on an order to print a large batch of Mercedes Benz car models. Our experts created a 3D model from a photo, after which the plaster Mercedes roll off the printer as if off a conveyor belt. Then they are poured into an acrylic resin cube - and an original and spectacular souvenir is ready.

To summarize: business ideas that earn

If you decide to open your own business, take a closer look at 3D printing solutions with photopolymer and gypsum, as services for the rapid creation of layouts, prototypes, casting models from these materials are consistently in demand on the market. A quick payback solution would be to purchase a wax printer, since it is more profitable for many foundries (especially jewelry) to order wax models to be printed on the side. The printer, designed for round-the-clock operation, will allow you to fulfill a large number of orders. Another profitable business idea is the so-called 3D-sharing, when the customer, before purchasing 3D equipment, can test the solution of the problem he needs in a rapid prototyping center.

How profitable will a business based on 3D scanning and 3D modeling services be? Orders in this market are constantly growing, in addition, you can do without large initial investments. Our expert talks about this in the second part of the article.

You can get more detailed information and advice on creating a RP-center from our specialists. Call right now: +7 (495) 223-02-06 .

Article published on 07/20/2018, updated on 07/04/2022

Desktop 3D printers for the home

Anet Anycubic Creality3D CreatBot Dremel Elegoo Felix FlashForge FLSUN Flying Bear Formlabs IBRIDGER imprinta MakerBot Peopoly Phrozen PICASO 3D QIDI Raise3D Tiertime Ultimaker Uniz Voxelab wanhao XYZPrinting ZENIT Zortrax

Availability

In stock

Manufacturer

Phrozen Raise3D Creality wanhao FlashForge

PICASO 3D Anycubic Formlabs Tiertime Flyingbear QIDI Uniz CreatBot Dremel DigiLab Felix Zortrax XYZprinting Ultimaker imprinta Elegoo MakerBot Anet FLSUN iBridger Peopoly snapmaker Voltera Voxelab ZENIT

Delivery

Assembled printer Assembly kit

Application

Architecture For large objects For beginners The medicine Education

Orthopedics Production prototyping Reverse engineering Advertising, exhibitions Sculpture Dentistry Hobby jewelry

Print technology

DLP/LCD/SLA FDM/FFF LFS

Thread diameter

1. 75 mm 2.85 mm 3.00 mm

Material type

ABS PLA PETG Photopolymers Flex

Nylon (Nylon) ASA Carbon HIPS PC PEEK PP TPU other Metal (Ultrafuse 316L, Ultrafuse 17-4PH)

Number of extruders (print heads)

Heating table

Yes Not

Wi-Fi or other wireless network

Yes Not

Country of origin

China Russia USA Taiwan Hong Kong

Netherlands Poland

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220x220x250 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220x220x250 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220 x 220 x 250 mm
Number of extruders (print heads)	1

Add to compare

Product added to compare Go

Manufacturer	Creality
Custom/Transit	Goods on the way
Construction area size	235x235x250 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220 x 220 x 250 mm
Number of extruders (print heads)	1

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220x220x250 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Custom/Transit	Goods on the way
Construction area size	220x220x270 mm
Number of extruders (print heads)	1
Country of origin	China

Free Shipping

Add to compare

Product added to compare Go

Manufacturer	Creality
Custom/Transit	Goods on the way
Construction area size	200x200x200 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	300 x 300 x 400 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Flyingbear
Construction area size	255x210x210 mm
Number of extruders (print heads)	1
Country of origin	China

Free Shipping

Add to compare

Product added to compare Go

Manufacturer	Creality
Custom/Transit	Goods on the way
Construction area size	250x250x400 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Custom/Transit	Goods on the way
Construction area size	350x350x400 mm
Number of extruders (print heads)	1
Country of origin	China

Free shipping

Add to compare

Product added to compare Go

Manufacturer	Anycubic
Construction area size	102x57x165 mm
Country of origin	China

Free Shipping

Add to compare

Product added to compare Go

Manufacturer	Phrozen
Construction area size	134x75x130 mm
Country of origin	Taiwan

Free Shipping

Add to compare

Product added to compare Go

Manufacturer	Anycubic
Construction area size	197 x 122 x 245 mm (print volume 5. 9 l)
Country of origin	China

Free Shipping

Add to compare

Product added to compare Go

Manufacturer	Phrozen
Construction area size	165x72x180 mm
Country of origin	Taiwan

3D printing is one of the most promising areas of technological development in the 21st century. Having gone a long way from bulky and heavy boxes to compact desktop devices, 3D printers have ceased to be something inaccessible to a wide range of users. The era of mass additive manufacturing has already arrived, and every home can now house a real desktop factory.

You can buy a 3D printer capable of printing small models and prototyping of medium complexity today at the price of an entry-level laptop. The price of PLA or ABS plastic, which acts as a consumable, also no longer seems exorbitant. In a word, if you have long dreamed of getting to know the world of 3D printing and joining the ranks of makers, the right moment has come!

To save you time and make it easier to select equipment, we have collected in one section all desktop 3D printers optimized for home and office use.