(506) 2240-6804
Leap motion vr mount 3d print
▷ leap motion vr mount easier to print 3d models 【 STLFinder 】
Leap Motion VR Mount - easier to print
thingiverse
Modified the original Leap Motion VR Developer Mount by LeapMotion to be printed more easily with an extrusion printer. ...Added supports to the Track's overhanging sections and removed the indent that was in the bottom of the Holder.
Leap Motion VR Mount - easier to print
prusaprinters
Modified the original Leap Motion VR Developer Mount by LeapMotion to be printed more easily with an extrusion printer. ...Added supports to the Track's overhanging sections and removed the indent that was in the bottom of the Holder. Category: Video...
Leap Motion Mount mixed with GoPro mount and Chest Mount
thingiverse
... platform. Leap Motion VR Mount - easier to print (http://www.thingiverse.com/thing:554070) GoPro Base (http://www.thingiverse.com/thing:53438) Gopro Chestmount (http://www.thingiverse.com/thing:83883) Great work to all! ...Lets keep building!
Leap Motion VR Mount
myminifactory
3D printable mount for attaching leap motion device to your VR headset. Compatable with any headset such as oculus, vive, etc.
Prints support free in two parts, I recommend 0.20mm layer height and medium infill.
Attach lower part of casing to your...
Leap Motion VR Mount
myminifactory
3Dprintable Leap Motion mount for your virtual reality headset. Compatable with any headset such as oculus, vive, etc. Prints support free in 2 parts, I recommend 0.20mm layer height and no support material. ... Attach lower case to your headset using...
Leap Motion VR Developer Mount
grabcad
3D CAD file for personal non-commercial use only, as is.NOTE: If you are looking to mount your Leap Motion Controller on an Oculus Rift CV1, the HTC Vive, or any other HMD with a curved front surface you should use our new Universal VR Dev mount,.
..
Leap Motion VR Developer Mount
thingiverse
NOTE: If you are looking to mount your Leap Motion Controller on an Oculus Rift CV1, the HTC Vive, or any other HMD with a curved front surface you should use our new Universal VR Dev mount, available here: http://www.thingiverse.com/thing:1589212...
Leap Motion to Openbeam Mount
thingiverse
This thing mounts a Leap Motion controller to Openbeam Extrusion. ... Tested on a Makerbot Replicator 2 35-50 minute build time
Leap Motion Universal VR Dev Mount
grabcad
The Leap Motion Universal VR Dev Mount allows developers to easily and consistently attach and remove the Leap Motion Controller from a VR headset.
This mount is curved slightly to better fit HMDs such as the Oculus Rift CV1 or the HTC Vive.Further...
Leap Motion Universal VR Dev Mount
thingiverse
The Leap Motion Universal VR Dev Mount allows developers to easily and consistently attach and remove the Leap Motion Controller from a VR headset. This mount is curved slightly to better fit HMDs such as the Oculus Rift CV1 or the HTC Vive. If you...
Leap Motion simple non-intrusive VR headset mount, V2
thingiverse
Very simple mount that only requires an extra bit of velcro to work, minimizing the changes you need to do to your VR headset.
This new version has a better grip and is designed to be printed with very minimal supports. ...Printed in two pieces that...
Leap Motion simple non-intrusive VR headset mount
thingiverse
Very simple mount that only requires an extra bit of velcro to work, minimizing the changes you need to do to your VR headset.
Leap Motion Mount
thingiverse
This is a mount to hold down a Leap Motion. It is designed to cover the leap and USB cable and is screwed down to a shelf. The USB cable runs trough a hole in the shelf. ... Instructions Printed on a.
..
Leap Motion Keyboard Mount
thingiverse
Today I received a leap motion controller and did not like leaving it in the middle of my desk so I went on TinkerCAD and designed this simple easy to print mount for the Leap that should work on most keyboards, this may need to be clipped to adjust...
Leap Motion Gopro mount
thingiverse
It give a lot of option in how to attach or interac with the leap motion.
Leap Motion neck mount
prusaprinters
(These are only needed if you want to use screws and the lid to secure the Leap Motion in place as seen in the first picture) (The holes are design for an inteference fit to the standoffs, you could add a drop of superglue if they are loose in your.
..
Leap Motion mount
thingiverse
a simple mount or cover for leap motion sensor, with cover for usb cable so it can't be removed etc. ... designed for securing the sensors onto a flat surface for public demo etc
Leap Motion chest mount
prusaprinters
(These are only needed if you want to use screws and the lid to secure the Leap Motion in place as seen in the first picture) (The holes are design for an inteference fit to the standoffs, you could add a drop of superglue if they are loose in your...
Leap Motion Collar Mount
thingiverse
My preferred way is to seat the Leap Motion into the topmost clip and then rock it in until the other clip clicks into place.
You can also slide it in at an angle and then rock it into place.
Included are two different files. The only difference...
Basic Leap Motion Mount
thingiverse
Simply smoothed it out a bit to just stick directly to my VR headset with TESA
leap motion mount for oculus rift 3D print model
cgtrader
leap motion mount for oculus rift 2016 The attachment is rounded like a helmet, allowing it to fit snugly
Pimax Leap Motion Mount 15*
thingiverse
Pimax Leap Motion Mount 15*
Leap Motion tie-wrap mount
thingiverse
This is a mounting thing for a leap motion, i use mine to mount it on a electric drumkit pipe.
...Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Infill: 20
Oculus Rift Leap Motion Mount
thingiverse
This is a simple Leap Motion Mount for the Oculus Rift CV1. You can use either rubber bands to secure it, or elastic bands like I've used. The elastic band I used obscures a couple of the IR sensors, so I don't advise using that thick a band... ... I...
Leap Motion Mount for HP Reverb G2
thingiverse
This mount allows to attach an original Leap Motion Controller to the HP Reverb G2 headset. The curvature is designed to fit the HP Reverb G2 specifically.
This mount requires the standard mounting adapter of the official developer mount, which can...
leap motion
thingiverse
leap motion holding
LEAP Motion Oculus DK1 Flat Mount
thingiverse
I found that users instinctively move their hands up to eye level when using LEAP Motion and Oculus Rift, so I created a mount with no downward angle. Smart Reality See our Augmented Reality app for construction at http://SmartReality.co! The fit...
HP Reverb G2 Leap Motion mount
thingiverse
.
.. of the headset so you can place it on exactly the right spot!
The mount fit the Leap Motion controller really thight so you have to press it in there with some force. ...Or scale the print to 101% Support: I printed it with Tree support in Cura.
Leap Motion Mount for Oculus Rift DK1
thingiverse
I made this before realizing that the Leap Motion Team made the STL file for their official VR mount available for everyone. ...It ended up being a great thing because it got me into 3D printing:) The current version sits kinda loosely on the DK1 but...
Stylised Leap Motion Mount for table/surface
thingiverse
Mounting for Leap Motion controller, suitable for using on a tabletop or other surface, where you need to screw the sensor to the surface and hide the cable (which should go down through a hole).
▷ leap motion mount 3d models 【 STLFinder 】
Pimax Leap Motion Mount 15*
thingiverse
Pimax Leap Motion Mount 15*
Oculus Rift Leap Motion Mount
thingiverse
This is a simple Leap Motion Mount for the Oculus Rift CV1. You can use either rubber bands to secure it, or elastic bands like I've used. The elastic band I used obscures a couple of the IR sensors, so I don't advise using that thick a band... ... ...
Leap Motion Mount
thingiverse
This is a mount to hold down a Leap Motion.
It is designed to cover the leap and USB cable and is screwed down to a shelf. The USB cable runs trough a hole in the shelf. ... Instructions Printed on a...
Leap Motion mount
thingiverse
a simple mount or cover for leap motion sensor, with cover for usb cable so it can't be removed etc. ... designed for securing the sensors onto a flat surface for public demo etc
HP Reverb G2 Leap Motion mount
thingiverse
This Leap Motion mount for the HP Reverb G2 is concaved. You can stick it with some double sided tape on the Reveb G2.
There is a small dot on the top of the mount.
Allign this dot with the P of the HP logo on front of the headset so you can place...
Oculus Rift CV1 Leap Motion mount
thingiverse
Super simple Leap Motion mount for the CV1 that prints quickly in one piece. Holds the unique distinction of being fully functional (although a little structurally weak) if the print is stopped halfway through. Postprocessing requires either a roll...
Leap Motion VR Mount
myminifactory
3Dprintable Leap Motion mount for your virtual reality headset. Compatable with any headset such as oculus, vive, etc.
Prints support free in 2 parts, I recommend 0.
20mm layer height and no support material.
... Attach lower case to your headset using...
Basic Leap Motion Mount
thingiverse
Simply smoothed it out a bit to just stick directly to my VR headset with TESA
Leap Motion Mount for HP Reverb G2
thingiverse
This mount allows to attach an original Leap Motion Controller to the HP Reverb G2 headset. The curvature is designed to fit the HP Reverb G2 specifically. This mount requires the standard mounting adapter of the official developer mount, which can...
Stylised Leap Motion Mount for table/surface
thingiverse
Mounting for Leap Motion controller, suitable for using on a tabletop or other surface, where you need to screw the sensor to the surface and hide the cable (which should go down through a hole).
Leap Motion Mount for Oculus Rift DK1
thingiverse
I made this before realizing that the Leap Motion Team made the STL file for their official VR mount available for everyone. ...It ended up being a great thing because it got me into 3D printing:) The current version sits kinda loosely on the DK1 but...
Leap Motion Mount for Oculus Rift DK2
thingiverse
This was my third attempt at designing a Leap Mount for the Oculus (2nd for the DK2). ...It still needs some work but I'm pretty happy with the outcome:)
leap motion mount for oculus rift 3D print model
cgtrader
leap motion mount for oculus rift 2016 The attachment is rounded like a helmet, allowing it to fit snugly
Leap Motion Mount mixed with GoPro mount and Chest Mount
thingiverse
.
.. platform. Leap Motion VR Mount - easier to print (http://www.thingiverse.com/thing:554070) GoPro Base (http://www.thingiverse.com/thing:53438) Gopro Chestmount (http://www.thingiverse.com/thing:83883) Great work to all! ...Lets keep building!
Leap Motion Gopro mount
thingiverse
It give a lot of option in how to attach or interac with the leap motion.
Leap Motion Keyboard Mount
thingiverse
Today I received a leap motion controller and did not like leaving it in the middle of my desk so I went on TinkerCAD and designed this simple easy to print mount for the Leap that should work on most keyboards, this may need to be clipped to adjust.
..
Leap Motion neck mount
prusaprinters
(These are only needed if you want to use screws and the lid to secure the Leap Motion in place as seen in the first picture) (The holes are design for an inteference fit to the standoffs, you could add a drop of superglue if they are loose in your...
Leap Motion VR Mount
myminifactory
3D printable mount for attaching leap motion device to your VR headset. Compatable with any headset such as oculus, vive, etc. Prints support free in two parts, I recommend 0.20mm layer height and medium infill. Attach lower part of casing to your...
Leap Motion chest mount
prusaprinters
(These are only needed if you want to use screws and the lid to secure the Leap Motion in place as seen in the first picture) (The holes are design for an inteference fit to the standoffs, you could add a drop of superglue if they are loose in your.
..
Leap Motion Collar Mount
thingiverse
Rebuilt from scratch, but inspired by [xunker's Leap Motion Shirt Clip](https://www.thingiverse.com/thing:1672775) I used one of those for a year until it broke, so I made my own! I had an issue where the Leap Motion would keep sliding around which...
Extended Leap Motion Mount for Oculus Rift DK2
thingiverse
A mount that positions your leap motion out in front of your DK2. It aims the camera down slightly for a better view of the most common interaction volume for hand tracking. Body snaps over the front of your DK2; the Leap slides into the casing from.
..
Leap Motion Mount for Go Pro Headset
thingiverse
This thing was made with Tinkercad. ...Edit it online https://www.tinkercad.com/things/aivDOXKG8oh
Leap Motion Mount for Valve Index
thingiverse
Time to put some junk in the frunk. ...:)
Leap Motion Mount for Oculus CV1 Consumer Version (No Adhesive Required)
thingiverse
I'm not a fan of the current official Leap Motion solution of "stick it on with some adhesive tape" so I made an easily removable Leap Motion mount for my Oculus CV1 (Consumer Version).
It is a little flimsy feeling and probably needs a fairly well...
Leap Motion VR Mount - easier to print
thingiverse
Modified the original Leap Motion VR Developer Mount by LeapMotion to be printed more easily with an extrusion printer. ...Added supports to the Track's overhanging sections and removed the indent that was in the bottom of the Holder.
Leap Motion VR Mount - easier to print
prusaprinters
Modified the original Leap Motion VR Developer Mount by LeapMotion to be printed more easily with an extrusion printer. ...Added supports to the Track's overhanging sections and removed the indent that was in the bottom of the Holder.
</p> Category:...
Pimax Leap Motion Mount. Remixed from someone's Vive/Leap Adapter
thingiverse
... to allow some leeway of Velcro. I've added a bolt-on Leap Motion Option remixed from the identified file- a SteamVR Sensor Mount. I haven't tested the fit yet, I am printing it right meow! ... My print was less than stellar, but you get the idea.
Leap Motion Mount for Valve Index (Repaired Mesh)
thingiverse
Remix of https://www.thingiverse.com/thing:3739295 to fix some mesh issues (There were some un-welded verts and flipped normals causing slicing issues in many slicers).
... I've changed nothing from the original model aside from technical surface...
Pimax Leap Motion Bolt-on Mount
thingiverse
A Pimax Leap Motion Mount that fits into the mounts on the Pimax underside. I believe these are M2 6mm but check before you torque them in there. ...
Leap Motion to Openbeam Mount
thingiverse
This thing mounts a Leap Motion controller to Openbeam Extrusion. ... Tested on a Makerbot Replicator 2 35-50 minute build time
Why 3D printing and VR are made for each other
Virtual reality and 3D printing are not just brothers in an era, but integral parts of each other.
Virtual reality and 3D printing have long been the most widely discussed in the media and popular topics related to new technologies. This is not at all surprising that there are two main reasons:
- spheres of life.
- Secondly, and not least, these two technologies organically, in a completely natural way, complement each other. And here's exactly how:
Prototyping new devices
Creating experimental models of cases and parts for future devices is not complete without a 3D printer. This is how HTC VIVE
was created step by step Read more in Makezine. And the model of the VR-manipulator for it:
The prototype of the serial model was created as a 3D object, after which it was printed and finalized. This made it possible for engineers to hold the product in their hands before the start of production and evaluate its ergonomics and convenience. The Surround 360 panoramic camera model (this is an open Facebook project for creating a 3D video camera) with a 360-degree field of view was created using the same principle:
Additionally, VR is very suitable for the feeling of volume in 3D spatial modeling: you can simulate a 3D model of a new device on a computer, carefully examine and edit it in virtual space, and then print a prototype of the future device.
Or, conversely, scan an existing blank, convert it to digital format, make the necessary adjustments (which is much easier, and most importantly, more accurate than on a physical model) and print a new version.
DIY VR devices different manufacturers are often sold at clearly inflated prices. Therefore, an increasing number of enthusiasts are printing on 3D plastic analogues of Cardboard and other, more advanced models.
At the same time, the models themselves are free, and printing them on a simple FDM 3D printer will be cheaper than buying cardboard glasses.
This is how a 3D model of the simplest virtual reality helmet looks like, i.e. Do-it-yourself VR headset for smartphone:
Damian Szyszkowski's DIY VR headset model
modeled on the Google Cardboard on a 3D printer
There are more sophisticated devices, with the possibility of various adjustments and settings, which, nevertheless, are just as easy to print and assemble.
Original 3D Printed VR Headset
Video showing how to assemble a DIY 3D Printed VR Visor:
Check out the free DIY VR Model Catalog at www.thingiverse. com
In addition to headsets, there are other virtual reality devices that you can create yourself. A headset or a helmet only allows you to immerse yourself in the space created by someone, but there are devices for those who want to create themselves: spherical cameras.
These are special video cameras, the coverage of which allows you to simultaneously capture the entire surrounding space. You can create a spherical camera for shooting VR shots and videos, functionally similar to those used for professional 3D immersive filming, by printing a special bracket with mounts for GoPro or other miniature cameras.
Multi-Hero3 Sphere Frame - Black Mount
Another version of the “spherical” frame for Hero - “Underwater” , suitable for underwater photography
VR - creation of non-standard spare parts and unique accessories for VR equipment.
DIY accessories and components for VR
New devices appear all the time, and it can be expensive and difficult to buy accessories for them - shipping, customs - all this takes a lot of time and money. Not to mention that not all of them are produced and sold by the equipment manufacturers themselves. The solution is simple - you can print, for example, non-standard and out-of-sale stands or hangers for VR helmets and other components of VR systems and other interesting accessories that will make the experience of using devices more comfortable and rich.
Here are just a few examples of these attachments designed for popular VR systems that you can download online and print yourself: HTC Vive controller, for games like The Nest
Wall mount for linkbox (switch box) of the HTC Vive system
Adapter for connecting the Vive base station to any standard tripod
Wall Mount for HTC Vive Headset Storage
Parts for connecting HTC Vive VR Headset to a more convenient than stock head mount
Wall Mount for Oculus Rift Storage can also be used as a stand for placement on horizontal surfaces
Simple hanger for vertical storage of the Oculus Rift on furniture or walls
Desktop stand for the Oculus Rift 9 VR headset0003
In this way, you can create any accessory, any part and any adaptation to your devices that you can think of.
It is enough to create in the editor or simply download the necessary part in digital form, load it into your 3D printer and print it.
Ideas - in life
It should be noted that most of the functions and capabilities of three-dimensional printers are quite available on far from the most expensive models of devices. For example, there are devices that are quite affordable for an ordinary person, moreover, they are of high quality and give more than a decent result.
One of the brightest examples of such equipment is the already well-deserved printer
Wanhao Duplicator i3:
A device of a higher class, but also easy to use and maintain - the famous
Picaso 3D Designer Pro 250:
Such a device is enough for the eyes for the manufacture of household items, souvenirs, parts of mechanisms and even some more technological products. Up to use in invention.
If you need greater accuracy and ease of use, then you can choose a 3D printer that is more expensive, but also obviously higher class.
For example - Formlabs Form 2:
This is almost a professional model of a 3D printer that provides resolution and speed that are not available to more budget models.
Fewer and fewer restrictions remain for such a promising duo as 3D and VR, because printing and scanning devices are improving, the quality of products is growing, and the range of materials used for printing is expanding day by day. In addition to plastics and food materials, wood and glass, metals and ceramics are already available for use. As well as virtual reality devices, which provide an increasingly natural effect of presence and more and more detailed images and interactive features. In the near future, these two technologies, together, will greatly change the picture of the world we are used to. What they have already started doing.
Finally, a demonstration of how these technologies work together - a 3D printed full-fledged VR helmet with its own screens and does not require a smartphone: Camera Accessories 3D Printing
Free Download Camera Accessories 3D Files
Discover a selection of the best 3D files to 3D print your camera accessories.
You can find handles, cases, protective cases, straps, tripods for your Canon, Nikon, Leica, Sony, Panasonic cameras, etc. 3D printing will help you get the most out of your camera.
Lens Cap Holder
Free
Lens Hood
Free
Camera Gimbal
Free
Made with Love Bokeh Kit
Free
LiftPod - Multipurpose Foldable Stand
Free
Bokeh Kit
Free
SD Card Holder
Free
Professional DSLR slider V4.0
Free
Flip Lens Cap
Free
LiftPod - Easy Lock Edition
Free
Electric_Driver_Upgrade_For_Slider_V4.
0 Free
Adapter thread M42 to Sony E (NEX)
Free
Shoulder rig
Free
Teleprompter for smartphone - tripod adapter
Free
Foldable Mini Tripod
Free
3D printed pinhole camera
Free
SD and micro SD holder 1-10 elements
Free
60 NeoPixel Ring Camera Mount
Free
DSLR Camera FollowSlider V2.0
Free
Camera hot shoe - Universal phone holder
Free
3D Printed Pinhole 35 mm
Free
Canon EF Eyecup
Free
Canon lens hood
Free
Camera Lens Cap Holder - 62mm
Free
Simple Camera Slider
Free
Sony A6000/A7 Hot Shoe Cover
Free
Tripod Ball Head
Free
Sony E-mount Rear Lens Cap
Free
Proteus LED Light Panel - DIY and Expandable
Free
Cage modular DSLR
Free
Rollei QAL-40 Camera Mounting Plate (C4i, C5i, C40i, C50i, Compact Traveler No 1, Compact Traveler No 10, CT-4A, CT-5A, CT-5C, M5 Mini, PGA-584, PGA-484, TT-1, T2S)
Free
Tripod Leveler
Free
Smooth Q Gimbal - Camera Attachment (Sony RX100 & Others)
Free
Shoulder rig for DSLR (NOT just for Canon 5D)
Free
Mini Tripods
Free
Hand held Camera Rig
Free
Adapter m43 (m4/3) to canon FD lens
1,50 €
SONY 9 55mm lens cap0135
Free
Camera speedlight umbrella flash holder
Free
1-Wege-Stativneiger, 1 Way Tilt Head
Free
Sony A-Mount Overhead Lens Mount
Free
Motorized Camera Slider MK3
Free
Sony E-Mount body to Nikon F-Mount Lens adapter
Free
Protective cage for cage modular DSLR
Free
Digital Camera Pinhole Adapter
Free
Handle for Cage modular DSLR
Free
Lens Cap
Free
Trekking Pole Monopod with Quick-Release
Free
Here is our selection of best STL files for camera , all these accessories are taken from Cults STL file library and available for 3D printing .
