(506) 2240-6804
Dso138 case 3d print
▷ case for dso138 digital oscilloscope 3d models 【 STLFinder 】
Case for DSO138 digital oscilloscope
thingiverse
Before you try this design, please also look at this modified version: http://www.thingiverse.com/thing:1202909 This is a case for the DSO138 digital oscilloscope. This single channel 200kHz bandwidth 1 Ms/s oscilloscope is very simple, and is...
stand for DSO138 digital oscilloscope in case
thingiverse
I created a simple stand for the DSO138 case because i do not like my DSO138 lying flat on the bench. It is even stable with a proper probe attached and can quickly taken out if need to. Print Settings Printer Brand: ...
Enclosure for DSO138 digital oscilloscope
thingiverse
An enclosure for the DSO138 oscilloscope with room for a 9V battery.
Stand for DSO138 Digital Oscilloscope
thingiverse
Stand for DSO138 Digital Oscilloscope. Little bit of lazy print, i gleud it with some screws togheter. ...But working great!
Enclosure for DSO138 digital oscilloscope
prusaprinters
An enclosure for the DSO138 oscilloscope with room for a 9V battery.
Print Settings Printer: TronXY X5S Rafts: No Supports: Yes Resolution: 0.25 Infill: 15% Filament: Generic PLA Any Category: Electronics
Case stand for DSO138 Oscilloscope
thingiverse
Remixed case stand for DSO138 Oscilloscope. Maked in SolidWorks. ...Source in attachment.
Case stand for DSO138 Oscilloscope
thingiverse
Case stand for DSO138 Oscilloscope.
-
Two versions of front cover because i had used long tact switches when soldering. One version for long switches and other for default short switches.
**Front cover printed with support**.
Back cover -...
Case for Sainsmart DSO138 Oscilloscope Board
prusaprinters
This is a case for the Sainsmart DSO138 Digital Storage Oscilloscope board. All switches are accessible. The range slider switches have extenders on the left. Function push buttons on the right are molded into the case. Probe and power openings are...
Case for Sainsmart DSO138 Oscilloscope Board
thingiverse
This is a case for the Sainsmart DSO138 Digital Storage Oscilloscope board. All switches are accessible. The range slider switches have extenders on the left.
Function push buttons on the right are molded into the case. Probe and power openings are...
Laser cutted acrylic case for DSO138 oscilloscope
thingiverse
I share with you my DSO138 Chinese oscilloscope acrylic case. After much searching, I only found projects for 3D printer, as I only have access to a laser cutting machine, made one and share for a better world. In the project was used acrylic 2mm. ...I...
Case for Sainsmart DSO138 Oscilloscope Board
pinshape
SummaryThis is a case for the Sainsmart DSO138 Digital Storage Oscilloscope board.
All switches are accessible. The range slider switches have extenders on the left. Function push buttons on the right are molded into the case. Probe and power...
DSO138 digital oscilloscope enclosure
thingiverse
This is a case for the famous DSO138 diy open source digital oscilloscope. Original design from thing 779159. I wanted to make some changes and I decided to redesign it. ...Print these buttons: 3 x button1 1 x button2 2 x slider1 1 x slider2
DSO138 oscilloscope case
thingiverse
Simple case for cheap oscilloscope module You`ll need: 1xDSO138 (can be obtained on ebay, aliexpress, etc.
.) 4x M3 screw 9V power supply Printed parts: 1x Top 1x Base 4x Button 3x Switch
DS0138 / DSO138 oscilloscope case / enclosure
thingiverse
This is a case designed for the cheap DS0138 / DSO138 oscilloscope.
DSO138 Digital oscilloscope front case
thingiverse
I just changed the lettering and placed another hole to better see the trigged LED, Also removed the lower corner name and written the model number.
Case for DSO138 mini DIY oscilloscope - H version
thingiverse
A simple DSO138 mini Jyetech DIY oscilloscope case for the H-version, which I recently bought from banggood.
This is a remix from https://www.thingiverse.com/thing:3234032 which is for the J-version. (Thank you BETLOG!)
The base is the same as...
USB Powered DSO138 Oscilloscope Case
thingiverse
This is my version of the DSO138 oscilloscope case that eliminates the 9V power port, and uses the USB for power. By doing this, the oscilloscope becomes ultra portable that can be powered using a USB power bank! To do this, I bought a MT3608...
case - DSO138 mini oscilloscope 001
thingiverse
2018-11-24--00-30-04 - A case for the DSO138Mini oscilloscope.
- IMPORTANT:
NOT the "H" version, and probably NOT clones.
Official Manual: https://jyetech.com/Products/LcdScope/UserManual_138mini.pdf shows title of "DN138-12v02" and Model:...
case - DSO138 mini oscilloscope 002
thingiverse
2018-12-30--14-42-55 - A case for the DSO138Mini oscilloscope. - The current evolution of https://www.thingiverse.com/thing:3234032 Separated into it's own thing for simplicity. - Supports BNC probe connector, 18650 battery pack and switch. -...
Simple stand for DSO138 oscilloscope
thingiverse
I designed this simple stand for my DSO138 oscilloscope. There are several more complex cases here but I wanted something quick and simple to print.
...You'll need 4 short self-tapping screws to build this.
Case for DSO138-Oszilloscope
thingiverse
This is a remix of https://www.thingiverse.com/thing:959009 i was not able to select this Thingi, so i do it here. ... I have created a version that can be orinted without any support cause it is made of two parts for the front casing.
Lithium cell powered DSO138 Oscilloscope Case
thingiverse
This is an 18650 cell powered case for the DSO138 mini oscillocope.
Charging is done by a standard TP4056 module. Apply some hot glue to keep it in place.
A small boost converter is required to step the voltage to about 8V for the scope.
...
Case for JYETECH 062 Digital Storage Oscilloscope
thingiverse
I have no 100% tested model for you, but I'm 100% sure that this model is OK for the JYETECH 062 Digital Storage Oscilloscope. 4 hours later... Yes about that 100% sure ;-/ during a rebuild of a dangling sketch I had extruded it the wrong way. Sorry...
Wall holder for DSO138 case
thingiverse
This is remix/add-on of Case for DSO138 digital oscilloscope made by Egil.
Simple two-part wall holder.
Allows using of oscilloscope while mounted.
Printed from PETG. ...
Additional parts:
4pcs M3x12-30 countersunk screw
DS0138 Digital Oscilloscope Case
thingiverse
This is a casement I designed for the DS0138 digital oscilloscope. It's a cheap one channel O-Scope which comes with just a circuit board and leads, and nothing else. This case makes it look nice and gives it some protection. The original board...
Digital oscilloscope case
thingiverse
just built a cheap digital oscilloscope from ebay. ...Needed a case, so made one. ...If I did then someone else must as well :)
DSO138 case
thingiverse
It is just simple DSO138 case.
DSO138 Oscilloscope case with 9V battery and a power switch
thingiverse
This is an adaptation of the case for DSO138 oscilloscope that features a 9V battery and a rocker switch for power (none of that tumbler switch rubbish). Soldering is pretty simple and is shown on the pictures but feel free to ask questions. I had...
DSO138 Case
thingiverse
There are all the files to make the case for the DSO138. ...See my tutorial to assemble it: Print Settings Printer: Prusa I3 Rafts: .
..
DSO138 case
thingiverse
It is a customizable house for the DSO138. Behind there is even space for an on/off switch. it looks professional in my opinion. I advice to use a 0.4mm nozzle. ...Any print settings is fine for me but the switches and the buttons need to have a 100%...
Free STL file Case for DSO138-Oszilloscope・3D printer design to download・Cults
ring hand
Free
Stinkefinger Pen Holder
Free
Sour cream cup
Free
Demon-Hand Pencil Holder
Free
Starfighter Impeller-Ducted-Fan RC-Plane
Free
Atomium - 3D-printable model as stl and Freecad
Free
FLITZI - a RC-model-speed-plane
Free
Cafe Clip for big Cafe-Bags
Free
Best 3D printer files of the Tools category
FORTNITE ARCARDE MINI LED .
BATTLE ROYALFree
Wall / Gap Test Prints (Customizable)
Free
ONE PEN
Free
Flat Penny Change Holder
Free
CİTROEN C5 BARDAKLIK ( CUP HOLDERS) DESIGN IS RENEWED
€20
Paint mixer for citadel paint
Free
Cyclone dust separator
Free
Up Plus2/Afinia spool holder for PLASIL 3D Filament
Free
Best sellers of the category Tools
ENDER 3 S1, S1 PRO, SPRITE, HOT END DUCT 4020 OR 5015 FAN, PROBE NO Y OFFSET
€2.29 -20% €1.
83
3D Printer Tool Holder V3.0
€1.04
Cut-Man - PET bottle cutter with handle!
€3.49
Ender 3, 3 V2, 3 pro, 3 max, dual 40mm axial fan hot end duct / fang. CR-10, Micro Swiss direct drive and bowden compatible. No support needed for printing
€1.56
phone ring holder
€0.90
well-engineered: Hemera fan duct
€2.50
Ender 3 Briss fang Gen2, Red lizard, spider, nf crazy, dragonfly, etc.
€1.73
Ender 3 S1 pro fan duct 5015 4020
€1.30
UNIVERSAL INDICATOR FOR BED LEVELING FOR ALMOST ALL PRINTERS
€2.81
Shrek pooping toothpaste topper
€2.
82
INDICATOR FOR BEST BED LEVELING FOR ENDER 3 V2
€2.81
Armadillo - Flex Wire Conduit
€1.68
Phone holder
€2.44
Minimus Hotend Cooler System
€2.33
ARTEMIS -> Magazine for Alligator 2 || 6.5" Arrows || Repeating crossbow
€6.25
Spartan 4mm Hex tool bit holder
€1.80
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.
DONATE: If you want, you can make a donation via PayPal.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!
Free STL file Case for DSO138-Oszilloscope・3D printing design to download・Cults
hand with ring
Free
Stinkefinger pen holder
Free
Cup of sour cream
Free
Demon hand pencil holder
Free
Starfighter Impeller-Ducted-Fan RC-Plane
Free
Atomium - 3D printed model in stl format and Freecad
Free
FLITZI - RC Aircraft Model
Free
Cafe Clip for large Cafe-Bags
Free
The best files for 3D printers in the Tools category
Post mount brake caliper holder (bicycle)
Free
Print in Place Mini Vise
Free
print in place long reach grabber
Free
nine0003 Grinder - Grindzilla0,50 €
Spool Holder (RigidBot)
Free
cnc router grbl arduino maker upgrade version
free
spool holder for several spool filaments
free
CIRCUIT I BM005
Free
Bestsellers in the Tools category
Cut-Man - PET bottle cutter with handle!
€3.
49
PRECISION CALIPER 3D PRINT DIY
3,13 €
Ender 3 S1 pro fan duct 5015 4020
1,30 €
Ender 3, 3 V2, 3 pro, 3 max, dual 40mm axial fan hot end duct / fang. CR-10, Micro Swiss direct drive and bowden compatible. Printing does not require support
1.56 €
ENDER 3 S1/S1 PRO COIL HOLDER AND DEPORTED COIL
€2.13 -twenty% 1.71 €
Ender 3 Briss fang Gen2, red lizard, spider, nf crazy, dragonfly, etc.
1.73 €
Bambu AMS Stand for placement raised 2nd block behind
1.14 €
INDICATOR FOR BETTER BED LEVELING FOR ENDER 3 V2
2. 81 €
telephone ring holder
0,90 €
ENDER 3 S1, S1 PRO, SPRITE, HOT END DUCT 4020 OR 5015 FAN, PROBE NO Y OFFSET
€2.29 -twenty% 1.83€
UNIVERSAL BED LEVELING INDICATOR FOR VERY ALL PRINTERS
2,81 €
SUPERBOX
1,50 €
Bit holder Spartan 4 mm Hex
1,80 €
Quick Print Paint Bottle Rack (6 sizes)
2.87 €
nine0003 ENDER 3 S1, S1 PRO, SPRITE, V3 AIR DUCT 5015 OR 4020, ACCELEROMETER, LED strip €2.69 -twenty% 2.
15 €
3D printed wave transmission (harmonic drive)
4.99 €
Do you want to support Cults?
Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so it is very easy to support us in maintaining activities and creating future developments of . Here are 4 solutions available to everyone:
-
ADVERTISING: Disable the AdBlock banner blocker and click on our banner ads.
-
AFFILIATION: Shop online with our affiliate links here Amazon. nine0006
-
DONATIONS: If you want, you can donate via PayPal here.
-
* INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!
100 smart thoughts from one stupid person.
.. - LJ ? Yesterday I wrote that I received a housing for DSO-138 from a colleague. nine0188 Arriving home, I quickly collected everything, shoved it in and turned it on.
Happy as a boa constrictor. Everything is fine. I just had to fiddle a bit with a needle file in the holes for the slide switches, but it only took a couple of minutes.
It still doesn’t hurt, probably, to work with sandpaper, putty, paint and polish, but that’s later, so far I’m very pleased!
Promised photos:
( Other photos...Hide)0165
Made a new amplifier board - this is already the 6th revision, I will not post it, because with a jamb, but cutting the tracks and soldering the jumpers saved me.
