(506) 2240-6804
Dji mavic pro clone 3d print
3d Printed Mavic Clone
Child Boards
Pages: [1] 2 3 ... 8 Go Down
Pages: [1] 2 3 .
Normal Topic Locked Topic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
.. 8 Go Up▷ dji mavic pro clone 3d models 【 STLFinder 】
DJI Mavic Pro Clone Remix
thingiverse
I had stumbled across the DJI Mavic Pro Clone by CdRsKuLL. I wanted a way to manipulate the files he had in OpenSCAD easier so I could make some of my own modifications as needed. I decided to convert all of the .stl files into polygon points that...
DJI Mavic Pro Clone
myminifactory
Following on from my Inspire Clone I decided to have a go at the DJI Mavic.
. This time it's a little different as I actually have one to measure and compare with so the clone is even better this time. I've tried to make this an easy print with no...
DJI Mavic Pro Clone
thingiverse
Following on from my Inspire Clone I decided to have a go at the DJI Mavic.. This time it's a little different as I actually have one to measure and compare with so the clone is even better this time. I've tried to make this an easy print with no...
DJI Mavic Pro Clone
pinshape
Following on from my Inspire Clone I decided to have a go at the DJI Mavic.. This time it's a little different as I actually have one to measure and compare with so the clone is even better this time.
I've tried to make this an easy print with no...
DJI Mavic Pro Clone 151%
thingiverse
Parts used: DJI Naza m lite (flash to V2) 4 x Racerstar 30A ESC 4 x Racerstar BR3508 Motors Matek PDB - XT60 Flysky FS-i6S 10ch Eachine TX5258-5.8GHz 72ch FPV Transmitter Tarot 680 Pro TL2829 T Series 1355 Carbon Fiber CW CCW Propellers Fullymax 4S...
Accumulator box for DJI Mavic clone
thingiverse
Accumulator box for 4s batteries. ...Can afford up to 6 AH batts sizes. Suits the DJI Mavic Pro (clone) project.
Mavic with bigger battery compartment
thingiverse
This is my version of a DJI Mavic Pro Clone with a bigger battery compartment.
It should suitable for a 4000 mAh.
The model based of CdRsKuLL.
Thank you for the great work.
The drone is under construction!!!!!
... Please check...
DJI Mavic 2 Pro
sketchfab
DJI Mavic 2 Pro
DJI Mavic Pro Case
thingiverse
DJI Mavic Pro Case
DJI Mavic 2 Pro
sketchfab
DJI Mavic 2 Pro with small changes.
DJI Mavic Pro Case
thingiverse
Caja para Drone DJI Mavic Pro CASE
DJI Mavic Look like (Clone)
grabcad
:)http://www.
instructables.com/id/Printable-Foldable-Quadcopter-DJI-Mavic-Clone-Fram/!! Caution this project is still on progress so maybe some changes will be made next !!Last update :"Adding head cover no GPS box... 11/1/17""Fiixed body botom arm...
DIY Maviclone (DJI Mavic Clone)
thingiverse
This is work in progress clone of the DJI Mavic. I started this project on September 26th, the night before the official release of the Mavic. I designed it based on leaked images, and had most of the CAD for the bottom frame sections and arms (all...
DJI Mavic Pro
3docean
3d model DJI Mavic Pro Polys: 1 936 233 3dsmax 2016, Corona Render 1.
4, Obj
DJI Mavic Pro
thingiverse
Train arriére Mavic pro
Dji Mavic pro Pied
thingiverse
Dji Mavic pro support de Pied coudé à 20 ° ou 15° une pièce Gauche et une pièce droite + utilisation tube de carbone : 10 mm longueur : 8 cm Un ajustement est nécessaire !
DJI Mavic Pro Hardcase
thingiverse
DJI Mavic Pro Hardcase The copter is pushed into the case with the Gimbal cover. A 10mm foam plate is attached to the lid and the bottom of the case.
The cover is fixed with velcro to the housing. ... Print Settings Printer: ...
Protectores dji mavic pro
thingiverse
Estos accesorios son protecciones para los cuatro apoyos del dji mavic pro, no son extensiones solo suben el dron 3 milímetros, no es la finalidad, son diseñados solo para protección de las partes de fábrica. Para los apoyos traseros se diseñó con...
DJI Mavic Pro Sunshade
thingiverse
Simple foldable sunshade for the DJI Mavic Pro controller. Will work with a wide variety of "largish" phones. Fits nicely with a Pixel XL, Nexus 6P and iPhone 6 Plus.
I'm sure it will fit many others. Print Settings Printer: Flash Forge Creator...
dji mavic pro quadcopter
3docean
- Corona 1.5 (you need the Corona renderer Plugin for 3ds Max) - Vray 2.3 (you need the Vray renderer Plugin for 3ds Max) - fbx (no materials, only model) - obj (no materials, only model) (This means that fbx and obj need some manual creating of...
DJI Mavic Pro Case
thingiverse
Embossed DJI and engraved Mavic Pro.
To get a smooth top w/ the font and not deal with supports in the letters I printed this right side up w/ 3% supports... once the printing reached a Z height of 30.
15mm I paused and added a layer of blue...
DJI Mavic Pro
thingiverse
DJI sign
DJI Mavic Pro 5D button
thingiverse
DJI Mavic Pro 5d
DJI Mavic PRO Controller Botton
thingiverse
DJI Mavic PRO control button
DJI MAVIC PRO SUPPORT LEGGS
pinshape
DJI MAVIC PRO EXTENSION LEGGS
DJI Mavic Pro Charger Cover
thingiverse
DJI Mavic Pro Charger Cover.
DJI Mavic PRO Controller Botton
cults3d
DJI Mavic PRO control button
Mavic Pro Clone Prop Adapter
thingiverse
I wanted to be able to use DJI Mavic foldable props on my Mavic Clone (http://diyrc.co.uk), but they use a specific DJI quick release. So, I created this adapter to work with my EMAX 2300Kv RS2205 motors. It should work with most motors, but I've...
DJI Mavic Pro propeller_Lock
thingiverse
NEW_DJI_Mavic_Pro_propeller_Lock.
stl
Dji Mavic pro stick extension
thingiverse
Dji Mavic pro stick extension for easier control.
Best Models for 3D Printing Mavic・Cults
DJI Mavic 3 battery connector
1 €
DJI MINI 2 - Folding Chassis
Free
Zubehörhalter Grundplatte Mavic 2
Free
DJI Mavic 2 Accuhalter für Zubehör
Free
Zubehörhalter Mavic 2
Free
Kombihalter für Tracker+Cam Mavic 2
Free
DJI Mavic 2 Lifter with hooks
1,50 €
Crystal Sky 7.
85" Stand for DJI Mavic Pro Controller Free
Camera shutter for DJI (Mavic) Mini1/2
Free
DJI (Mavic) Mini1/2 Controller Sun Shade
Free
License plate Mavic Air 2
2.50 €
Stick Largos para DJI RC Pro
Free
DJI Mavic 3 Foam Gimbal Clamp
Free
Drone landing pad | DJI Mini 3 2 | Micro Drone | Foldable
Free
Case for DJI Mavic Air 2
3 €
DJI RC-N1 remote control holder extension
0,79 €
Mavic 2 Propeller Case
Free
Dji Mavic 2 Pro - Mavic Mini 1 Remote Control Adapter for Phone Holder
Free
DJI BATTERY COVER
Free
Wheel straightening stand
5 €
DJI Mavic 2 Enterprise Advanced Display Stand
Free
DJI Mavic Mini, Mini SE, Mini 2 Landing Pad
Free
Modified Mavic Water Recovery Mount.
Free
Stand for DJI Mavic Air
Free
Mavic Air Propeller Case
Free
DJI RC-N1 Lanyard Mount (Mavic 2, Air 2S, Mavic Air, Mavic 3, Mavic Mini, Mavic mini 2)
€6.90
DJI Mavic Quadlock Support and Gimbal Protector
Free
Stand Vifly Beacon Mavic Air 2s ...
1 €
DJI Mavic Mini 1 Insert for rear arm
2.16 €
DJI Mavic mini 3 pro Stand/Holder
Free
DJI mavic mini 2 rear bracket
3 €
DJI mavic mini battery belt holder
0.52 €
DJI Mavic Air 2 propeller lock
Free
DJI Mini 3 Pro Dual Strap / Battery Holster
2.
88 €
DJI Mini 3 Pro tactical battery holders
2.88 €
DJI Mavic Mini
Battery Extractor ToolFree
Camera Protective Case for DJI Mavic Mini
5 €
DJI Mavic Mini 3 Pro RC "Quick Shade"
1.92 €
DJI Mavic Mini 3 Pro Tactical Landing Gear
2.88 €
Osmolite
3.50 €
DJI Mavic Mini (1 & 2) Battery case with clip
1.92 €
Battery case for DJI Mavic Mini (1&2)
1.92 €
DJI Mavic Mini Tactical Landing Gear
1.92 €
Prototype DJI MAVIC PRO
2 €
Mavic Mini (spark), phone holder
Free
Engine guard DJI Mavic
1.
22 €
DJI MINI 2 AIR MAVIC PRO 3 R/C SHOULDER STRAP
2 €
DJI MAVIC PRO 1 PIEDISTALLO ESPOSITORE 9 HOLDER0003
5 €
3D printing body for Mavic
Application
Subscribe author
Subscribe
Don't want
33
We would like to present the completed work on 3D printing parts for Mavic quadcopter. This is a new edition of the Mavic quadcopter for a different controller.
3D printing in Arkhangelsk is made by 3DELO 3D Technology Center. Materials of the REC company were used for the work. 3D printing was done with ABS plastic. Many thanks to my colleagues for the reliable and high-quality plastic for the 3D printer. It is always calm and confident with him on any 3D printers. We recommend these materials for the manufacture of functional and high-quality parts.
This is what Mavic Pro quadcopters look like. we will present to your attention a slightly different and miniature unmanned aerial vehicle - a quadrocopter. Mavic is a portable quadcopter with a set of modern technologies. Our quadcopter body is 3D printed, DJI NAZA Lite brains, 2213 935kv Emax motors, DYS XSD20A DShot speed controller, 3s 2200 mAh battery.
Mavic's engines keep up with the previous Phantom. Flight control is now possible at a distance of more than 2-5 kilometers - thanks to the signal transmission system. It's safe to say that the Mavic quadcopter is superior to many of its predecessors. Upon noticing an obstacle, the Mavic may decide to fly around it or stop and hover in the air. And sometimes you don't have to worry about its safety. Well, there are many more additional features. Those who are passionate about this topic will appreciate all the advantages of this device. And for a simple reader, the idea of using 3D printing for practical purposes will be interesting.
The cost savings when making a hull using 3D printing is obvious. Making changes to the model is a huge advantage compared to purchased items. The ability to quickly change and choose colors and materials is also a big plus.
Now about the process. The ABS plastic in 3DELO was selected for each part in accordance with the planned appearance. Everything is carefully laid out and tuned for high-quality filling of parts, without compromising the weight of the aircraft and the strength of the structural elements. Well, in flight .... while printing on a 3D printer, and then into the sky!
More photos of details.
Installation of the internals went without any problems.
So this is how the assembled Mavic looks like.
Everything is mounted, everything fits. Checked - it flies! For those who are interested, there is a video.
The 3DELO team in Arkhangelsk wishes everyone pleasure from the work done.
Let your result please those around you. Contribute to the development of 3D technologies.
Detailed information on this work made on a 3D printer can be found at this link.
Subscribe to the author
Subscribe
Don't want
33
Even more interesting articles
3
Subscribe to the author
Subscribe
Don't want
(Photo: University of Basel, Christian Flierl)
Using additive manufacturing...
Read more
3
Subscribe to the author
Subscribe
Don't want to
Some projects surprise not with the complexity of execution, but, on the contrary, with simplicity. This work was shared by.
