Creality sla 3d printer

Official Website, Leading 3D Printer Supplier & Manufacturer

CREALITY - Official Website, Leading 3D Printer Supplier & Manufacturer

Ender Series Resin 3D Printers CR Series Fully Enclosed Printers Ecosystem

Ender-5 S1 3D Printer

$559.00 Learn More >

Ender-5 S1 3D Printer $559. 00

Ender-3 V2 Neo 3D Printer

$299.00 Learn More >

Ender-3 V2 Neo 3D Printer $299.00

Ender-3 Max Neo 3D Printer

$369.00 Learn More >

Ender-3 Max Neo 3D Printer $369.00

Ender-3 Neo 3D Printer

$219.00 Learn More >

Ender-3 Neo 3D Printer $219.00

Ender-3 S1 Plus 3D Printer

$529. 00 Learn More >

Ender-3 S1 Plus 3D Printer $529.00

tw-block tw-mt-12 tw-mb-5 tw-hidden "> Learn More >

tw-block tw-mt-12 tw-mb-5 tw-hidden ">

Application Fields

Consumer/Maker

3D Printing To Realize Wonderful Ideas

Education

Solution For Demonstration, Research and Career Preparation

Dentistry

Solution for High-percision and Low-priced Dental Cast

Anime

Solution For Carage Kits Production

About Creality

1. 6

Million+

Number of users

Million+

Annual shipments exceeded

Patented Technology

Featured On

Learn More >

Download

Learn More

Support

Learn More Learn More

Go to the Store to Buy Now

Buy Now

Creality LD-002R 3D Printer | LD-002R 3D LCD Resin Printer

Home Collections [CA Warehouse Clearout]LD-002R LCD Resin 3D Printer

$ USD

2 Reviews Pricing Not Include Tax

Ship From

Canada

Resin

LD-002R

Ship to

It is expected to arrive within and will cost $ USD to ship

This item can't be shipped to this Country/Region

Bundles

Quantity

28 Available

Add To Cart Buy It Now

Continue To Shopping View Cart

People who bought this item also bought

LD-002R LCD Resin 3D Printer

BUILD AND MOTION: Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.

ANTI-ALIASING： MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.

QUICK LEVELING： Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.

PERFORATED PRINT PLATE： Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.

AIR FILTER： A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.

LD-002R LCD Resin 3D printer news

LD-002R LCD Resin 3D Printer high strength interpretation of ultra-high cost-effective configuration

LD-002R adopts the "LCD selective area light transmission principle" molding technology. The LD-002R 3D printer integrates many functional technologies in printing accuracy, printing speed, and product functions, and has nine high-end configurations, making the new LD-002R available for more market choices.

learn more

What are SLA, DLP, and LCD resin 3d printers? What are their molding principles and differences?

Regarding resin 3D printing, most people may only know the molding method of SLA,（Photo-curing: After being irradiated with light, a special photosensitive printing liquid is cured to become a 3D printed object. ） And most people will know that the market prices will come from 1,000 to 10,000 US dollars, even more, which is relatively expensive.

learn more

Download

Customer Reviews

Based on 2 reviews

50%

(1)

50%

(1)

Write A Review

Ask A Question

Reviews (2) Questions (0)

$ USD

ADD TO CART BUY IT NOW

Write a review

Ask a Question

All about the new Creality CR-30 3D printer

What is a 3D printer and why is it needed?

A 3D printer is a device in the form of a machine tool that has a numerical control capable of performing only additive operations, more specifically, adding a portion of materials to any workpiece. It is mainly used layer-by-layer printing methods. 3D printing refers to a variety of additive manufacturing operations, as well as rapid prototyping technology.
Since the late 1980s, various scientific centers have been involved in additive operations, but time is passing, and now it is possible to print and create things using a 3D printer at home.

Why 3D printers are needed

3D printer devices are suitable for people who want to create things easily and quickly, and most importantly, with high quality.
No need to search for project cases;
Rapid product design;
Thanks to the 3D printer, you can do repairs, because it allows you to make unique parts that cannot be bought in a store;
Part models, in case you can't design them yourself, can be found on the Internet;

Varieties of 3D printers

There are several types of this device that differ not only in appearance, but also in functionality and performance, as well as in the technologies on which the work is based:
FDM technology (Fused Deposition Modeling) - type of printer, which is based on the printing of plastic in a layer-by-layer direction. Ideal for amateur printing, because the materials used for this technology are cheaper. FDM printers are among the most popular, simple and safe devices.
SLA technology (Stereolithography Apparatus) is a technology based on stereolithographic principles, that is, plastic is replaced by a photopolymer resin that hardens under ultraviolet rays. It is difficult to use this type of printer at home, because the photopolymer resin is quite toxic.
SLS technology (Selective Laser Sintering) is a technology that consists of selective laser sintering. These printers are usually larger and the raw materials used for this type of printing are much more expensive. Often this technology is found in high-tech production.

New 3D printer Creality CR-30

What would you like to say about this model? Firstly, this printer is a know-how from Creality, because such a model has endless printing along the Z axis.
Now the use of 3D printer printing has become available to all manufacturing industries. After all, now much less money will be spent on materials.

Pluses

The main advantages of this printer model include the following parameters:
1. The Creality 3DPrintMill CR-30 3D Printer called Infinite-Z, which is based on a roller conveyor that provides fairly high performance, as well as continuous printing Z-axis printing. Optionally, you can install a removable extension bracket, which can prevent falling models during printing.
2. CoreXY structure with enhanced stability and strength, supported by an isosceles right triangle, providing high quality printing.
3. The conveyor belt is based on wear-resistant nylon, which has good adhesion to the model.
4. The print is made at an angle of forty-five degrees, eliminating all the resulting limitations of its form - the vertical design of the nozzle. It is thanks to them that uninterrupted printing is ensured.
5. With a versatile and stable 24V/350V power supply, adapting to AC 120V/200-240V is no problem.
6. If the filament breaks, the filament sensor stops the printing process.
7. Availability of exclusive CrealityBelt software, which was developed specifically for 3DPrintMill.
8. This printer has a motherboard that makes minimal noise.
9. Factory calibration, allows you to start printing immediately after installing a 3D printer.
10. The presence of built-in cooling fans gives the print a more improved look, and also greatly increase the life of the printer.
11. A distinctive feature is that in the event of a power failure, power failure, or when the thread breaks, it resumes again.

What's in the box

This printer's kit consists of:
1. X/Y drive assembly;
2. The bottom of the printer;
3.Display;
4. Spool holder;
5. Profile rack 1, profile rack 2;
6. Plastic spools;
7. Memory cards and card reader;
8. Blue cable grips, size two;
9. Nut set M5T
10. Hexagon head screws, ten pieces;
11. Nozzles in the amount of two pieces;
12. Side cutters in the amount of two pieces
13. Pneumatic photoelectric switch;
14. Pneumatic photovoltaic river cables;
15. Cheese head screws with hexagon socket, with spring washer M5x45 in the amount of four pieces;
16. Socket wrench
17. Cable ties in the amount of ten pieces;
18. Power cables;
19. Pan head screw with hexagon socket M5x8;
20. Cheese head screws with hexagon socket and spring washer M5x12 in the amount of four;
21. Feeler gauge
22. Nozzle cleaning needles
23. Wrench set and screwdrivers
24. M5x12 hex pan head screws in the amount of six pieces;
25. Teflon tube

Tsvetnoy Mir is the largest supplier of 3D equipment in Russia. They produce such types of printers as desktop, industrial, 3D scanners, orthopedic scanners, 3D manipulators, 3D pens, printer consumables, printer spare parts, accessories and so on.
The company also provides services in the field of selection, configuration, training, warranty, post-warranty maintenance of 3D equipment.
Sale of equipment is available not only to individuals, but also to legal entities. Direct deliveries directly from manufacturers, which allows us to offer them more pleasant conditions.

Now 3D printing has become even more accessible, and you can make plastic parts and more without leaving your home.

Source

Tags:

Creality CR-30 3D printer, FDM (Fused Deposition Modeling) technology, SLA (Stereolithography Apparatus) technology, SLS (Selective Laser Sintering) technology, 3D scanners, 3D printing0005

Other materials:

Government Approves Additive Technology Development Strategy
5 Product Development Challenges and How New Reverse Engineering Techniques Solve Them
Overview of 3D Systems Industrial Metal 3D Printers
Choosing a System for Quality Control of Large Parts: 3 Important Aspects
Growing and 3D printing teeth: 6 breakthrough technologies in dentistry

Attention!
We accept news, articles or press releases
with links and images. [email protected]

Desktop 3D printers for the home

Anet Anycubic Creality3D CreatBot Dremel Elegoo Felix FlashForge FLSUN Flying Bear Formlabs IBRIDGER imprinta MakerBot Peopoly Phrozen PICASO 3D QIDI Raise3D Tiertime Ultimaker Uniz Voxelab wanhao XYZPrinting ZENIT Zortrax

Availability

In stock

Manufacturer

Phrozen Raise3D Creality wanhao FlashForge

PICASO 3D Anycubic Formlabs Tiertime Flyingbear QIDI Uniz CreatBot Dremel DigiLab Felix Zortrax XYZprinting Ultimaker imprinta Elegoo MakerBot Anet FLSUN iBridger Peopoly snapmaker Voltera Voxelab ZENIT

Delivery

Assembled printer Assembly kit

Application

Architecture For large objects For beginners The medicine Education

Orthopedics Production prototyping Reverse engineering Advertising, exhibitions Sculpture Dentistry Hobby jewelry

Print technology

DLP/LCD/SLA FDM/FFF LFS

Thread diameter

1. 75 mm 2.85 mm 3.00 mm

Material type

ABS PLA PETG Photopolymers Flex

Nylon (Nylon) ASA Carbon HIPS PC PEEK PP TPU other Metal (Ultrafuse 316L, Ultrafuse 17-4PH)

Number of extruders (print heads)

Heating table

Yes Not

Wi-Fi or other wireless network

Yes Not

Country of origin

China Russia USA Taiwan Hong Kong

Netherlands Poland

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220x220x250 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220x220x250 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220 x 220 x 250 mm
Number of extruders (print heads)	1

Free Shipping

Add to compare

Item added to compare Go

Manufacturer	Anycubic
Custom/Transit	Goods on the way
Construction area size	220x220x250 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	235x235x250 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220 x 220 x 250 mm
Number of extruders (print heads)	1

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	220x220x250 mm
Number of extruders (print heads)	1
Country of origin	China

Free Shipping

Add to compare

Item added to compare Go

Manufacturer	Anycubic
Custom/Transit	Goods on the way
Construction area size	180 x 163 x 102 mm
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Custom/Transit	Goods on the way
Construction area size	220x220x270 mm
Number of extruders (print heads)	1
Country of origin	China

Free Shipping

Add to compare

Item added to compare Go

Manufacturer	Creality
Construction area size	200x200x200 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Construction area size	300 x 300 x 400 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Flyingbear
Construction area size	255x210x210 mm
Number of extruders (print heads)	1
Country of origin	China

Free Shipping

Add to compare

Item added to compare Go

Manufacturer	Creality
Custom/Transit	Goods on the way
Construction area size	250x250x400 mm
Number of extruders (print heads)	1
Country of origin	China

Add to compare

Product added to compare Go

Manufacturer	Creality
Custom/Transit	Goods on the way
Construction area size	350x350x400 mm
Number of extruders (print heads)	1
Country of origin	China

Free Shipping

Add to compare

Item added to compare Go

Manufacturer	Anycubic
Construction area size	102x57x165 mm
Country of origin	China

Free Shipping

Add to compare

Item added to compare Go

Manufacturer	Anycubic
On order/Transit	Goods on the way
Construction area size	197 x 122 x 245 mm (5. 9 l)
Chamber volume	5.9 L
Country of origin	China

3D printing is one of the most promising areas of technological development in the 21st century. Having gone a long way from bulky and heavy boxes to compact desktop devices, 3D printers have ceased to be something inaccessible to a wide range of users. The era of mass additive manufacturing has already arrived, and every home can now house a real desktop factory.

You can buy a 3D printer capable of printing small models and prototyping of medium complexity today at the price of an entry-level laptop. The price of PLA or ABS plastic, which acts as a consumable, also no longer seems exorbitant. In a word, if you have long dreamed of getting to know the world of 3D printing and joining the ranks of makers, the right moment has come!

To save you time and make it easier to select equipment, we have collected in one section all desktop 3D printers optimized for home and office use.

Creality sla 3d printer