(506) 2240-6804
3D printed bike bottle holder
▷ bicycle water bottle cage holder 3d models 【 STLFinder 】
Bicycle Water Bottle Cage Holder
thingiverse
attach on fame diamention 35 mm
Bicycle Bottle Cage / Holder
thingiverse
I've been meaning to do a functional design and don't have a water bottle holder for my bicycle... so here's one! I am currently using two of these on my bicycle and they are working great. Strong enough that you don't have to worry about gently...
Pet Cage Water Bottle Holder
thingiverse
This holds the water bottle against the animal cage better than the original bungee cable it came with which kept sliding resulting in the water bottle falling over.
Hamster cage water bottle holder
prusaprinters
Water bottle holder/bracket to hold the water bottle. ...You'll need two m3 bolts and nuts for it.</p> <h4>Print instructions</h4><p>0.2 layer<br/> 20% infill<br/> PLA</p>
Pet Cage Water Bottle Holder
thingiverse
This holder keeps the bottle in place secure while the rabbit drinks. ...Print Settings Printer Brand: RepRap Printer: ...
Bicycle Water bottle holder
thingiverse
Bicycle water bottle holder clamp for bicycle without the mounting holes on the frame.
Printed with PLA and painted with arcylic paint.
Use M6 x 20 and M5 x 20 screws.
... The holder is from https://www.thingiverse.com/thing:3128889
Bicycle Water Bottle Holder
thingiverse
2x 25mm M3 screw 2x M3 nut To assemble, simply attach the clamps to the frame, and attach the water bottle holder to the frame clamps using the 24mm M3 screws. Take note of which side of the clamp has a recess for the M3 nut. By tightening the...
Bicycle water bottle holder
thingiverse
I needed a bottle holder for my Merida bicycle, so I just designed and printed it myself.
Water bottle holder for rodent cage
thingiverse
Easy to print water bottle holder to attach your pet rodent's water bottle to a cage grid. Smaller holder is meant for 47-56mm diameter bottles, and larger version is meant for 57-66mm diameter bottles. If your cage spacing is under 20mm, you can...
Water Bottle Holder for Rabbit Cage
thingiverse
Water bottle holder for my son's rabbit. Got a hand me down bottle but no holder. ... Works pretty good!
Water Bottle Holder for Mouse Tank/Cage
thingiverse
A simple 16oz plastic water bottle holder was created for a 20-gallon glass fish tank for mice.
The plan is to adhere the holder against the tank with hot glue. There are two names (of our mice) on the holder: Calico and Peanut You could always...
Bicycle Water Bottle Holder Clamp
prusaprinters
So I custom designed and printed these clamps which let you screw in a regular bicycle water bottle holder (eg. Aluminum). </p><p>These clamps designed for an Oval-ish bicycle frame (see photos) and the top and bottom parts clamp together using...
Bicycle Water Bottle Holder, Ultralight
thingiverse
This is my take on the ultra-lightweight water bottle holder for bikes.
It works great and much nicer than having to spend $30 on each one.
This requires supports on the angled support arms (depending on your printer). Supports are required on...
Bicycle lock holder for bottle cage
thingiverse
The dimensions are exactly made to the measures of this lock, but the idea should work for every folding lock that is not bigger than the bottle cage. ...The material (nGen Flex) is just right for this purpose: firm enough so that the part is stable and...
Bicycle CO2 pump holder at bottle cage
thingiverse
This will keep a CO2 pump & a CO2 cartrige It is installed on Bottle cage.
...My CO2 pump diameter was 27mm Print Settings Printer: XYZ dacinci jr 1.0 ...
Bicycle water bottle cage with zip-tie attachment
thingiverse
This is a water bottle holder designed to be zip-tied to a bicycle that doesn't have bottle cage screws (or for where you want to attach it to a tube without screws). I recommend ABS. It prints in three parts which need to be glued together. ...
Bicycle water bottle cage with zip-tie attachment
cults3d
This is a water bottle holder designed to be zip-tied to a bicycle that doesn't have bottle cage screws (or for where you want to attach it to a tube without screws).
I recommend ABS. It prints in three parts which need to be glued together. (It...
Bike Water Bottle Cage
thingiverse
This is a water bottle cage for an electra townie bike
Water_bottle_cage
grabcad
Mock up of a bike water bottle cage Hole are correct size (M5x0.8) and correct spacing (64mm)
Water bottle cage
thingiverse
This is water cage for standart bikecylce holes for bottle cage. A distance between a holes is 65mm.
...I make one from PLA, but I dont know how many times will life.
Water Bottle Cage Solid
thingiverse
The original water bottle cage (thing:53973) had a few spots where the objects weren't connected all the way. I corrected the problem areas. Otherwise, this is the exact same object as thing:53973. Thank you to jungletech for designing the water...
Bike water bottle cage
thingiverse
The most up-to-date files will always be at the 3d-water-bottle-cage github repository. Print Settings Printer Brand: LulzBot Printer: Mini Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: The bottom of the cage wings have a pretty vicious.
..
Raindrop Water Bottle Cage
myminifactory
Weighing in at ~40g, the Raindrop Water Bottle Cage makes makes the most of the 3D printing process. Its design considers the anisotropic material properties of FDM printed objects and should be printed upright, with its base on the build plate,...
Water Bottle Cage
thingiverse
This is a water bottle cage for a bicycle. It is separated into three parts for easy printing. The two rings insert into the bar, and all three pieces are screwed into place at the mounting points on the bike. The bottom of the bar has been...
Water Bottle Cage
thingiverse
I printed the bottle cage I "remixed" this from for my mountain bike, but found that smaller bottles could slide past the lower platform.
So I redesigned the part with a bigger supported platform, bigger tolerances, fillets on some corners to reduce...
Cage Water Bottle holder for 2.5 inch bottles
thingiverse
This is a water bottle holder for a metal wire cage-type pet, like guinea pigs, rabbits, etc. ...It fits a 2.5 inch diameter water bottle snugly, and the hook part stays in place on a vertical crosspiece.
ThermoFlask 40oz Water Bottle Holder for Bicycle
thingiverse
A water bottle holder for ThermoFlask bottles for bicycles. ...The bottle is large and doesn't even come close to fitting in a traditional water bottle holder.
Made in sketchup and converted to STL. Enjoy!
...
Please comment
Battery holder for bicycle water bottle mount
thingiverse
Fits into your bicycles water bottle mount. Made to strap the battery around the holder. ...Very easy design but it works fine.
Guinea pig / Rabbit / Rat / Hamster cage water bottle holder
thingiverse
The standard wires simply don't help, so if you love your pets enough to get your own custom cage, come along and print these water bottle holders xD Suitable for LM animal farms and Midi (320 ml - M suffix model) bottles.
P.S. ...You have to scale up...
Jeep JK roll cage stanley water bottle holder
thingiverse
This is 21oz. ...Stanley water bottle holder for a Jeep jk. It can be zip-tied to the roll cage to allow you to hold a bottle that wont fit in the cup holder. Can be scaled to fit other bottles or a fire extinguisher like I also did. ...
▷ bicycle bottle cage 3d models 【 STLFinder 】
bicycle bottle cage
grabcad
common bicycle bottle cage
Bicycle Bottle Cage - Butterfly
pinshape
Bottle cage in butterfly shape! I would love it in my bike ;) Waiting to get my 3D printer to test it and make some upgrades.
... You only need 2 M5 screws plus washers to fix it to your frame!
Bicycle Bottle Cage
thingiverse
There are a lot of water bottle cages available already but this one is designed the way I wanted it. ... I'm making it available with the Fusion 3D design file so it's easy to tweak.
Bicycle Bottle Cage / Holder
thingiverse
The counterbore's are designed so that the bottle cage screws will sit flush with the top surface of the cage and not touch your bottle. Check out the design on YouTube! Big thank you to anyone that shows interest in my designs :) Help me...
Bicycle Bottle Cage (Hydro Flask)
thingiverse
This is a simple bottle cage for bicycle frames with a bottle cage mount.
Screws with a head up to 6.5mm tall can be used with this.
Depending on the bottles you're using, there are two files, one with a 65mm bottle diameter and one with a 70mm...
Bicycle Bottle Cage Strap Mount
thingiverse
Some post processing may be needed to get bolts and nuts to fit correctly Designed to be used with any bottle cage. ... Parts needed: 2x M5 bolt (10mm) 2x M5 Nylock nut 1-3x velcro strap or equivalent strapping to secure the mount to the...
Bicycle Bottle Cage - No lugs
thingiverse
Water bottle cage for those who have run out of lugs on their frame.
Sized for standard water bottles (2-7/8" dia) and a 1.25"-dia tube. Attachment to frame via velcro/hoseclamps/zipties. V1 - Uploaded 5/5/16. Haven't tested on a bike yet. Fits...
Front Mountable Bicycle Bottle Cage
thingiverse
This is a simple customizable front mountable bicycle bottle cage I made for my son for his small bike which has no mount holes. It fits on the handlebar or front frame tube (diameter 22 mm). Bottle diameter is 73.025 mm (standard bike bottle...
Bicycle Bottle Cage Mount for Tile
thingiverse
Hide a Tile underneath your bottle cage.
...
Use Hexlox to secure.
bicycle bottle cage Fixed support (cable tie)
thingiverse
Hi share as a sample Please use it well. ... M3 bolt & nut Supports: NO (When the bicycle does not have a water bottle cage hole, used to be fixed)
MTB bicycle bottle cage 3d model
cgstudio
High detailed 3d model of bicycle bottle cage.Model is fully textured with all applied materials:- textures formats: TIF (x1), PSD (x1)- textures size: x2048 (x2)- materials types: StandardMesh smooth 1: 6 296 polys, 6 290 vertsMesh smooth 2: 25 184...
Bicycle Bottle Cage
grabcad
Do not attempt to use this model without modifications since it will brake easily.
...It was made to be printed for less than 20g since I had limited resources when I made it.
Bicycle Bottle Cage
myminifactory
I sketched this up in Onshape for my carbon fiber bike. I thought it would look great in black. Mounting holes are 2.5 inches or 63.5 mm which should fit most standard bikes. ... Thanks
Bicycle Bottle Cage
thingiverse
I sketched this up in Onshape for my carbon fiber bike. I thought it would look great in black.
Mounting holes are 2.5 inches or 63.5 mm which should fit most standard bikes.
This took 10 hrs to print with RePlay PLA at slower speeds.
If you...
Bicycle bottle cage
thingiverse
My version of a bicycle bottle holder. ... Triangular mounts should fit anything from 60 mm to 80 mm.
Bicycle bottle cage mark II
thingiverse
<i>I can't find my original bicycle bottle holder design after it was uploaded to Thingiverse. It's not present on my profile nor is it searchable. Get it together, Thingiverse!</i> This is the Mark II bicycle bottle holder. The triangle mounts...
Remix from Bicycle Bottle Cage / Holder by PretEnGineering
thingiverse
This is a remix from the Bicycle Bottle Cage / Holder by PretEnGineering.
I made a round shape on the backside for fitting a tube of a bicycle frame and added some tunnels vor mounting it with cable ties as an alternative to screws.
...
Bicycle Handlebar Bottle Cage Mount Clamp 24mm
thingiverse
Bottle cage mount for bicycle handlebars with 24mm (or 23.8mm) clamp diameter, separate version for 22.2mm clamp.
My Customized Front Mountable Bicycle Bottle Cage
thingiverse
Customized version of http://www.thingiverse.com/thing:103666 Created with Customizer! ...http://www.thingiverse.
com/apps/customizer/run?thing_id=103666
bicycle bottle "cage" for weight weenies
prusaprinters
<p>Make sure you glue your waterbottle thight to the holder. I used hotglue and it works fine.<br>This is a prototype. ...If you want to make it better you can use the .step file :)<br> </p>
Bicycle Water Bottle Cage Holder
thingiverse
attach on fame diamention 35 mm
Bicycle Handlebar Bottle Cage Mount Clamp 22.
2mm
thingiverse
Bottle cage mount for bicycle handlebars with 22.2mm clamp diameter, separate version for 24mm clamp.
Bicycle water bottle cage with zip-tie attachment
cults3d
This is a water bottle holder designed to be zip-tied to a bicycle that doesn't have bottle cage screws (or for where you want to attach it to a tube without screws). I recommend ABS. It prints in three parts which need to be glued together. (It...
Bicycle water bottle cage with zip-tie attachment
thingiverse
This is a water bottle holder designed to be zip-tied to a bicycle that doesn't have bottle cage screws (or for where you want to attach it to a tube without screws).
I recommend ABS.
It prints in three parts which need to be glued together.
...
Very simple bicycle bottle cage (Sujección para botella de bicileta)
thingiverse
ENG: This is my first object I made, it's like a clamp to hold a bottle to my son's bicycle. Bottle diameter is 46 cm and bicycle tube is 38 cm, but you download source file and modify as you need, it was designed with FreeCAD. SP: Este es mi primer...
Mountable Bicycle Bottle Cage (for 1L Normbrunnen Bottles)
thingiverse
Customized version of https://www.
thingiverse.com/thing:103666 Created with Customizer! ...https://www.thingiverse.com/apps/customizer/run?thing_id=103666
Bicycle CO2 pump holder at bottle cage
thingiverse
This will keep a CO2 pump & a CO2 cartrige It is installed on Bottle cage. ...My CO2 pump diameter was 27mm Print Settings Printer: XYZ dacinci jr 1.0 ...
Bicycle lock holder for bottle cage
thingiverse
The dimensions are exactly made to the measures of this lock, but the idea should work for every folding lock that is not bigger than the bottle cage.
...The material (nGen Flex) is just right for this purpose: firm enough so that the part is stable and...
MTB bicycle sport bottle with cage 3D model
cgtrader
High detailed 3d model of bicycle bottle cage with bottle.Model is fully textured with all applied materials: - textures formats: TIF (x5), PSD (x2) - textures size: x2048 (x2) - materials types: StandardMesh smooth 1: 24 322 polys, 24 545 verts
MTB bicycle sport bottle with cage 3d model
cgstudio
High detailed 3d model of bicycle bottle cage with bottle.Model is fully textured with all applied materials:- textures formats: TIF (x5), PSD (x2)- textures size: x2048 (x2)- materials types: StandardMesh smooth 1: 22 802 polys, 23 025 vertsPrice:.
..
Free STL file Bicycle water bottle holder clip・3D printed object for download・Cults
Tires
Free
Small portable drill holder
Free
Stand
Free
Table football
Free
Small moral department
Free
Solitaire game
Free
Shield / shade for bicycle helmet
Free
The best files for 3D printers in the Tools category
Multi-Color Dog Poop Bag Dispenser
Free
Coronavirus Covid-19 Emergency Face Mask, The Friendship E-Mask
Free
Door handle and button pusher with housing
Free
Sleeve Case for Raspberry Pi
Free
NANOHACK 2.
0 - N95 MASKS AGAINST CORONAVIRUS COVID19 #HACKTHEPANDEMIC Free
A set of tools for children!
1.34 €
Pocket Tapping Handle
Free
Pegboard hangers for Park Tool DAG derailleur alignment gauges
free
Bestsellers in the Tools category
NEW GENERATION CAR PHONE HOLDER
2,50 €
well designed: Hemera fan duct
2.50 €
AIR DUCT 5015 OR 4020 ENDER 3 S1/PRO V3
€2.44 -fifteen% 2.07 €
Fire hydrant storage container
2.05 €
PRECISE DIAL INDICATOR 3D PRINT DIY
1.86 €
Paint stand with scissors
5.
65 €
Quick print ink bottle holder (6 sizes)
€2.90
PET-Machine, make your own plastic bottle filament at home!
50€ -80% 10 €
Version 2 Alligator 2 || Repeating crossbow || 3d printed shop || Inspired by Joerg Sprave
1.50 €
INDICATOR FOR BETTER BED LEVELING FOR ENDER 3 V2
€3.20
Printer boxes for Ikea Lack Table
1,99 €
Case for Chill Buddy lighter
1.01 €
Housing FLSUN SR
8,50 €
Ratchet holders - magnetic - holders for tool box organization
2,90 €
FAST PRINT STACKING STORAGE BOXES STACKING CONTAINERS
€1. -fifty% 0.75 € 
50
Ender 3, 3 V2, 3 pro, 3 max, dual 40mm axial fan hot end duct / fang. CR-10, Micro Swiss direct drive and bowden compatible. No support required for printing
1.67 €
Do you want to support Cults?
Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so it is very easy to support us in maintaining activities and creating future developments. Here are 4 solutions available to everyone:
-
ADVERTISING: Disable the AdBlock banner blocker and click on our banner ads.
-
AFFILIATION: Shop online with our affiliate links here Amazon.
-
DONATIONS: If you want, you can donate via PayPal here.
-
* INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!
26 3D printed smart gadgets for urban cyclists
Urban cycling is gradually gaining popularity. Two-wheeled monsters have taken over the streets, which is great for the health of the planet and the bank account. However, every cyclist has his own style, habits and needs, which bikes do not always meet. Fortunately, the days when everyone had one approach are long gone. And 3D printing technology played an important role in this.
We have collected 26 of the most useful and practical things for cyclists and even supplemented them with photos for clarity! These 3D printed smart gadgets will make your travels (and life in general) much easier and more enjoyable...
1. Carrying handle.
No more clumsy ladder climbing.
Designer Pookas
2. Bag hook and water bottle holder.
Stop riding a bike with one hand, it's life threatening!
Designer Renaud DeFrancesco
3. Bottle holder.
It seems to be made of metal, but this is only an appearance. It's actually nylon. And it should be noted that this holder perfectly fixes a water bottle.
Designer greenengineer
4. Beads for knitting needles.
How can you consider yourself a stylish cyclist if there are no beads on the spokes of your bicycle?
Designer Jonathan Monaghan
5. Stainless steel jewelry.
Only with these little things will you be able to rightly call your bike "My Prelest".
Designer vorwaertz
6. Steering wheel with mirrors.
Don't sacrifice safety for beauty. Better choose both!
Designed by Annabelle Nichols from New Zealand
7. Bicycle bow tie.
Honestly, it looks very attractive.
Designer Tristan Hummel
8.
Bicycle headlight. Simple and practical accessory that will make you stand out from the crowd.
Designer kdw
9. Bottle wing.
Another great way to stand out. And another way to use a water bottle.
Designer Pookas
10. Bicycle watch.
No more cycling with one hand or frantically searching for your watch in your pocket. And it's great!
Designer Phil Viloubay
11. Flower pot.
Stylish ladies on iron horses will love this accessory. Take flowers with you on the road…
Designer wearableplanter
12. Clutch control mechanism.
For improved control.
Designer Rich Olson
13. Valve caps.
If the choice always gives you torment, then you are in big trouble. Designers have prepared hundreds of original models for you!
Designer prathos
Designer prathos
Designer Pookas
14.
Bottle holder. Everyone knows how inconvenient it is to get a bottle out of a backpack while riding…
Designer smaddox3
15. Bicycle rack.
You remember the Clug, the great and handy bike rack, right?
16. Bicycle license plate.
Make your bike stand out. Just because you can.
Designer yourhandsmyface
17. Chain stop.
Why get your hands dirty?
Designer scottamayson
18. Wallet.
You must have had situations in your life when you stood in line for coffee dozens of kilometers from home and suddenly realized that you forgot your keys and bank card at home. It was scary, right?
Designer marius_p
19. Travel bottle opener.
No one will start the party without you. Checked!
Designer chromoly
20. Unique tire tread pattern.
If you're worried you won't find your way home, or planning on having another drink.
