(506) 2240-6804
3D print accessories
Top 6 Essential 3D Printer Accessories
3D printer accessories are additional tools and parts that fulfill a specific function or requirement of the 3D printing process. For example, some filaments like PVA and Nylon need to be dried to print properly and produce higher quality 3D printed parts and reducing the risk of failing a print job. The most common 3D printer accessories include filament dryers, vacuum containers, dry boxes, different sized 3D printer nozzles, hardened nozzles, 3D printer carts, and 3D printer bed adhesive.
- Filament Dryer: PrintDry Filament Pro
- Vacuum Container: PrintDry Vaccuum Container
- Drybox: Polybox
- 3D Printer Carts: Raise3D Pro2Plus printer cart Raise3D Pro2 printer cart
- 3D Printer Bed Adhesive: Magigoo, Magigoo PP, Magigoo PA
- Hardened nozzles: Raise3D hardened nozzle
Why Are Filament Dryers Necessary in 3D Printing?
Most filaments print at 200C or above, and filaments must be dry before beginning the printing process. If a filament is still wet during printing, the moisture from the wet filament will vaporize in the nozzle. This will have a high chance of printing failure and cause a poor final print quality. Nylon and PVA are two typical examples of filaments absorb moisture from the air. It is necessary to dry them out before printing. It is recommended to dry out PLA and ABS filaments if they were exposed to air for more than one week, especially in an area that contains high humidity. A useful 3D printer accessory that dries out filaments is the PrintDry Filament Dryer Pro. PrintDry Filament Dryer Pro is a storage box that provides a heated environment that bakes filaments. The heated-environment of the dryer allows moisture to escape, ensuring that the filament remains dry.
Vacuum Containers Are Important 3D Printer Accessories
Filaments that absorb moisture can be kept dry between print jobs so the next printing job can begin without delay. A 3D printer accessory such as the PrintDry Vaccum Container will keep filaments dry in storage.
The PrintDry Vaccum Container features a special vacuum valve and pump which suck the air out of the container creating a vacuum seal. The vacuum seal prevents moisture in the air from entering the storage container. The PrintDry Vacuum Container indicates when the vacuum seal has been created. The center of the vacuum valve will collapse inwards from its original dome shape once the vacuum seal is created.
Why and How Do Dryboxes Benefit the 3D Printing Process?
When filaments are dried, it means low moisture has left the filament. If the material property is hydrophilic, meaning if the dried filament is left in the open air, it will begin to absorb moisture, making it wet again. And wet filaments lead to a failed print job. Sometimes filaments used in projects with a longer printing time are exposed to the moisture in the air longer. In such cases, after a certain amount of hours, the filaments can become wet again which will lead to a failed print job.
A 3D printer accessory such as the Polybox is a dry box that works with industrial 3D printers to keep filaments dry during the printing process. The PolyBox features a filament guide tube from the PolyBox to the 3D printer’s extruder to prevent any moisture from affecting the filament during the printing process.
3D Printer Carts Are Practical and Make 3D Printing Easier
Professional 3D printers such as dual extruder 3D printers and large format 3D printers that are larger than desktop 3D printers need a dedicated workspace. Carts are an excellent way of giving the 3D printer its needed workspace. For example, Raise3D offers pedestal printer carts with wheels to roll around. These pedestal carts are designed to keep work at eye-level. Raise3D pedestal carts can bring the printer to the proper operating height so the user can easily operate the 3D printer without having to bend over. Finally, the carts also help to organize any tools needed during the 3D printing process while also storing accessories, filaments, and parts.
More 3D printer accessories can assist the 3D printing process. However, each application is different, and it is imperative to evaluate what specific applications and printing projects require. For example, it is recommended to keep spares of common consumables such as hot ends, build plates, buildtak, nozzles, and more. For any additional questions, contact Raise3D.
3D Printing Adhesive is Necessary for Some Filaments
Filaments need to be able to stick to the build plate of the 3D printer while the part is being built up during the printing process. Some 3D printers come with a plain glass plate and it is mandatory to apply an adhesive to the glass plate to make a print stick to the glass plate. 3D printers with glass plates are not recommended because applying the glue is a messy process. The glass plate itself could also break becoming a potential hazard. However, Raise3D professional 3D printers feature a build plate with a buildtak surface.
A buildtak surface is a great sticking surface for most 3D printing materials. However, certain 3D printing materials require extra adhesive to stick to the surface. In such cases, glue sticks, like MagiGoo, are a good complimentary 3D printer accessory.
In general, it is recommended to have at least one extra build plate to swap out for each printer. However, there are certain situations in which having a spare build plate to swap out is practical. For example, it may be necessary to change to a different 3D printing material, and that material may require a different print bed. Other times the production process may be quicker if the printer bed holding a finished 3D printed part is removed and replaced with a fresh print bed to continue the next print job, instead of waiting to take out the finished 3D printed part first.
Different Glues Are Necessary for Different Filaments
However, sometimes different types of glue are required for different kinds of filaments.
For example, MagiGoo also offers MagiGoo PA and MagiGoo PP. MagiGoo PP works with PP filament. The molecular structure of PP filament makes it difficult for the PP filament to adhere to other materials, like the 3D printer bed. MagiGoo PP will help models made with PP filament stick to the printer bed.
MagiGoo PA is intended to work only with PA filament. There are three main types of PA filament which can either be grafted together or reinforced with carbon or glass. PA has difficulty sticking to the 3D printer build plate with a tendency to warp, making them a challenge to print with. MagiGoo PA is intended to address these PA specific concerns while retaining the high-quality and user-friendly design of the original MagiGoo.
Magigoo PAHow Do Different Sized 3D Printer Nozzles Impact 3D Printing?
Having different 3D printer nozzles is essential for different types of print jobs. For example, bigger nozzles, like a .8 3D printer nozzle, prints out more material and a thicker layer height.
This means the print job can be completed faster. It is common to use a bigger nozzle with a thicker layer height to quickly produce a 3D printed part. However, print quality and finer features are usually compromised in the final printing result. For example, the print layer will be more obvious in the final 3D printed part. However, this compromise may not matter for certain applications or can be adjusted in the post finishing. In such cases, this form of printing will save printing time. In contrast, smaller nozzles, like a .4 3D printer nozzle are necessary to print a thinner layer height.
The thinner layer height and smaller nozzle sized will be able to produce finer details and produce a better print quality in the final 3D printed part. In general, doubling the value of the layer height should cut the print time down by about half, but it always varies from model to model.
| Nozzle Size | Layer Height | Print Time |
|---|---|---|
. 4mm nozzle | .2 layer height | 42 hours, 15 minutes, and 32 seconds |
| .8mm nozzle | .4 layer height | 16 hours, 36 minutes, and 52 seconds |
Why Are Hardened Nozzles Essential For 3D Printing?
Nozzles do not just come in different sizes. There are also hardened nozzles that are mandatory for applications that require filaments made with composite materials such as carbon fiber, glass fiber, etc. For a full list of such filaments, click here. Composite materials are harder than brass and will be abrasive to the brass nozzle. This will damage the brass nozzle by enlarging the nozzle tip size. When this occurs, the print file settings no longer match the actual nozzle size on the 3D printer. In this situation, the print quality decreases, and the risk of a failed print job increases.
There are three kinds of hardened nozzles. The first is a brass nozzle with a hardened coating, such as the current hardened nozzles on the Raise3D printers.
Since the nozzles are mainly brass, the heat conductivity is not affected, meaning the printing temperature is not affected much. Finally, brass nozzles with a hardened coating are the most affordable. However, it is recommended to keep spare hardened coated nozzles to replace the hardened nozzle whenever the coating wears off.
The second type is a high-speed steel nozzle with WS2 coating. It is abrasion-resistant, with a high printing performance, and priced between the brass nozzle with a hardened coating and the brass nozzle with a ruby tip.
The third and final type of hardened nozzle is a brass nozzle with ruby tips. Brass nozzles with ruby tips have an overall good printing performance, but they are also quite expensive. It is not uncommon for brass nozzles with ruby tips to be priced as high as $100 per nozzle.
Connect with Raise3D:
Have you had a great experience with Raise3D that you would like to share? Please contact us at inquiry@raise3d.
com. We look forward to hearing from you.
For more information about Raise3D printers and services, browse our website, or schedule a demo with one of our 3D printing experts.
Top 15 Must-Have 3D Printer Accessories and Tools
3D printing industry has seen an accelerated growth in development over the years. From the massive and quite expensive 3D printers in the past, the models available today are more compact, affordable and easy to use. However, successful 3D printing does not only depend on the 3D printer itself. There are a variety of 3D printer accessories that play an important role when it comes to the quality of the final product.
With the right accessories, you can turn your average 3D printer into an incredible machine and you can be more assured that your prints will come out exactly as desired.
From removing support material to improving bed plate adhesion, here is a list of the top 15 3D printer accessories that will help you get the most of your 3D printer.
Disclosure: There are affiliate links in this article. As an Amazon Associate I earn from qualifying purchases.
Filament Storage Container
Get it on Amazon / AliExpress / Banggood
One of the most important accessories a 3D printer owner must possess is an appropriate filament storage container.
Most of the 3D printer owners don’t pay attention to that, which can lead to so many problems like clogging, bad layer adhesion, breakage, etc. That’s why it is very important to safely store your filaments in a moisture free environment.
The first option is a filament box, which keeps your filament dry, dust-free, and also dispenses filament. It has temperature and humidity sensor, and you can also print directly from the box.
Vacuum Sealed Storage Containers
Get it on Amazon
Another great option are vacuum sealed storage containers. They come in a pack of 5, which is pretty awesome.
Masking Tape
Get it on Amazon / Banggood
Masking tape is one of the most widely used 3D printing accessories. It is used to help each print adhere better to the print bed and is highly recommended. Furthermore, the finished print is much easier to remove from the bed as well as protect it from scratches.
Make sure you choose masking tape with a width of at least 5 cm (2 inches). Having a wider tape means you’ll need fewer strips to cover your print bed, which will lead to better results.
Alternative: Kapton Tape
Get it on Amazon / Banggood
Although masking tape has been widely used for covering print beds and is cheaper option, Kapton tape is much better in the long term since it handles high temperatures better. This tape also prevents severe warping resulting in a much better 3D print. Kapton tape can be combined with other products, such as hairspray for best results.
PVA Glue Stick
Get it on Amazon / Banggood
When 3D printing, it’s vital to ensure good adhesion of your print to the build plate.
So, another way to increase plate adhesion is covering your print bed with washable glue stick. You can apply glue directly to your build plate and wipe it off easily with water.
This is one of the best bed adhesion solutions and works well with most materials, except for those prone to very high warpage like ABS and polycarbonate.
It works pretty well and it can easily be found at a wide variety of stores and at a very reasonable price.
Alternative: Hair Spray
Get it on Amazon
Many people also recommend spraying the bed with hair spray. Using hairspray to add an extra layer of ‘stickiness’ to your print bed is a quick and easy process.
But you must be careful with this method because using hairspray regularly and without proper care can damage your printer.
3D Print Removal Tool
Get it on Amazon / Banggood
Sometimes you might find that your 3D print has stuck to your build plate.
A 3D print removal tool, or spatula, can easily solve this problem. All you need to do is to put it gently underneath the print and carefully lift it up. You can also use this tool for scraping off little bits of filament.
You probably got a one with your 3D printer, but that’s just a generic spatula which sometimes doesn’t do the job.
This set of different spatulas ensures you always have the right tool for removing any object you print. These spatulas are as thin as a knife blade, but without the sharp edge. They’re also usually angled in such a way that you can hold the handle parallel to the bed. It will prevent you from scratching the tray or damaging the part. I consider this set as an essential 3D printer accessory.
Carving Tools
Get it on Amazon / Banggood
When printing parts with a lot of little details and supporting material, you need to do some extra work to get a good finished look. For finishing the 3D prints where a little work is required, this set of carving tools is perfect for smoothing out your final product by removing excess filament and bringing to perfection all the little details.
This set contains 12 different carving tools of varying shapes and sizes that will meet most of your needs.
Alternative: Diamond Needle File Set
Get it on Amazon / Banggood
Another tool perfect for working on small, delicate projects is a diamond needle file. This set includes 6 pieces with different shape and size, and each one serves a different purpose.
Pliers
Get it on Amazon / Banggood
Needle-nose pliers can allow you to get into the fiddly areas of your 3D printer and your prints while providing a good, strong grip. Always look for a good quality pair of pliers with a rubberized, slip-resistant grip.
They can be used to remove jams in your 3D printer, to cut filaments, or to install new filaments. Sometimes, the prints get stuck to the print beds, so they can also be used to remove those prints.
Tweezers
Get it on Amazon / Banggood
A full set of tweezers with various shapes and sizes is a must when it comes to the more complicated tasks with 3D printing.
They offer a very good and cheap solution for very fine and high precision adjustments in your 3D printer or printed parts.
They’re great for plucking oozing filament from the extruder nozzle without burning your fingers. Also, they can be used for post-processing finishing of your prints.
Sandpaper
Get it on Amazon / Banggood
Having a set of sandpapers in a variety of different grits can be very useful in the post-processing step of your printing. A good sandpaper will help you define the details on your print and smooth out any rough edges and surfaces.
We recommend buying a set of good quality sandpaper from a well-known brand, from coarse (120 grit) to fine (1000 grit or more). Good quality sandpaper does not wear out easily, making it last longer and saving you money in the long run.
Alternative: Rotary Tool
Get it on Amazon / Banggood
As an alternative, you can use a rotary tool with different accessories, which will make things much easier and accurate as well.
Digital Caliper
Get it on Amazon / Banggood
A digital caliper is a must-have tool for detail-oriented 3D print maker. When 3D printing, there can be a lot of measurements involved, so this tool will help you increase efficiency and accuracy, which is very important.
It enables you to make very precise measurements of a part you want to replicate in 3D, to verify the dimensions of a calibration print, or to check the precision of the measurements of your prints versus the dimensions in the source CAD model.
Calipers are also handy for checking the accuracy of your 3D printing filaments, since the actual filament diameters often differ from what is advertised. This will help you make the necessary adjustment.
The key to successful 3D print lies in getting a good first layer. And to get a good first layer, you need to have the right print bed surface which needs to have a smooth finish and to be rigid and durable as well.
Some people like to swap out their default print beds for glass plated ones, because they handle heat better and won’t warp the printed parts as easily.
Borosilicate Glass Bed
Get it on Amazon / Banggood
Borosilicate glass can withstand extremely high temperatures, since it’s tempered. Also, it helps giving the print a smooth finish. When buying glass print bed make sure its dimensions match your model of 3D printer.
Alternative: Heat Bed Platform Sticker
Get it on Amazon / Banggood
This printing surface is compatible with almost every printing material. You can print directly onto the surface without any additional adhesives. Once you’re done printing, it is very easy to remove your printed part without damaging it.
You can use it for multiple prints and all you need to do is to wipe down with isopropyl alcohol between prints. Also, it can be easily cut to the desired size with a utility knife.
Nozzle Set
Get it on Amazon / Banggood
Nozzles come in many different shapes and sizes, but they all have the same function.
Why would you want to have more than one size nozzle?
There are a few reasons why: for example, you want to print a larger model quickly, so you need to use a larger nozzle; you want fine details on your print, or you have an intricate print, so you need to use smaller nozzle; or your current nozzle gets clogged, so you need to replace it.
Nozzle Cleaning Kit
Get it on Amazon / Banggood
The extruder nozzle can easily get clogged with melted plastic after frequent use. It is one of the most significant parts of your 3D printer, so it is very important to keep it maintained, ensuring the quality of your 3D prints.
Cleaning the nozzles is not as easy as it seems, so you want to make sure you have the right tool for this purpose. There are special nozzle cleaning kits, designed for cleaning different sizes of nozzles, so as long as you have this accessory, you’ll always be able to keep your 3D printer clean and ready for the next print.
Solutions for Better Finish
After a part comes out of the printer, it needs to undergo a surface finishing process before it’s ready for use because you can often see its laminated appearance and roughness.
So, there are so many reasons to finish a 3D printed part, for example, you might want to enhance its appearance, to smooth out uneven surfaces, or to improve its durability.
Depending on the 3D printing material, you can choose acetone, or XTC-3D high performance 3D print coating.
Acetone
Get it on Amazon
By using acetone, you can easily achieve a smooth and polished surface to your ABS 3D prints. A thin layer of this product is just enough to get a better finish. Be very careful when deciding to use acetone, since it is not compatible with all materials.
XTC-3D High Performance 3D Print Coating
Get it on Amazon
We know that ABS can be smoothed with acetone, but when it comes to PLA, that’s not the case. This epoxy is a protective coating for smoothing and finishing 3D printed parts.
You just need to mix the two liquids together and apply the mixture onto any 3D print. It dries uniformly without leaving brush strokes.
Working time is about 10 minutes, and it takes about 4 hours to cure.
Super Glue
Thicker: Get it on Amazon
Thinner: Get it on Amazon / Banggood
Super glue has endless supply of uses for 3D printing jobs, and is incredibly effective. It can be used to fill in gaps, to repair broken parts, and to combine two or more smaller 3D printed parts together.
Different types of glue are used for different jobs. For example, for filling gaps a thicker type of glue is required whilst for delicate procedures, like combining two components together, a thinner type of glue is more appropriate.
Alternative: Acetone
Get it on Amazon
Acetone can be used for bonding 3D printed parts made of PLA, ABS or HIPS. In fact, it can be used for any material soluble in acetone. It gives very strong bond, and, if done properly it creates invisible seam.
Additional 3D Printer Accessories – 3D Scanner
Get it on Amazon / Banggood
Having a 3D scanner will take your 3D printing experience to the next level, as it enables you to create accurate 3D models from actual real objects.
There are so many portable, relatively cheap and easy to use scanners on the market. It’s an ideal choice for anyone who wants a compact device that’s easy to carry around and is one of the most beginner-friendly machines around.
Read more: Creality CR-10 V3 Review – Is It the Best Mid-Range 3D Printer?
Conclusion
Choosing the right 3D printer accessories greatly increases the chances of creating a flawless 3D print. These decent investments can make the 3D printing process much easier and enjoyable.
Which of these 3D printer accessories do you already use? Do you have some other useful 3D printer accessories that are not on the list and should be? I’d love to hear about it in the comments section below.
If you want to buy a 3D printer check out our list of the best budget friendly 3D printers that are ideal for hobbyists and beginners who are just getting started.
Accessories for 3D printers and 3D scanners
Add to compare
Item added to compare Go
Add to compare
Product added to compare Go
| Manufacturer | Kapton |
| Country of origin | China |
Add to Compare
Product added to compare Go
| Manufacturer | PICASO 3D |
| Country of origin | Russia |
Add to compare
Product added to compare Go
| Manufacturer | PICASO 3D |
| Country of origin | Russia |
Add to compare
Product added to compare Go
| Country of origin | Russia |
Add to compare
Product added to compare Go
| Country of origin | Germany |
Add to compare
Product added to compare Go
| Manufacturer | HELLING |
Add to compare
Product added to compare Go
| Manufacturer | Anycubic |
| Country of origin | China |
Add to compare
Product added to compare Go
| Manufacturer | HARZ Labs |
Add to compare
Product added to compare Go
| Country of origin | China |
Add to Compare
Product added to compare Go
| Manufacturer | TriDEshniki |
| Country of origin | Russia |
Add to compare
Product added to compare Go
| Manufacturer | TriDEshniki |
| Country of origin | Russia |
Add to compare
Product added to compare Go
| Manufacturer | Kapton |
| Country of origin | China |
Add to compare
Product added to compare Go
| Manufacturer | PICASO 3D |
| Country of origin | Russia |
Add to compare
Product added to compare Go
| Manufacturer | Kapton |
| Country of origin | China |
Add to Compare
Product added to compare Go
| Manufacturer | TriDEshniki |
| Country of origin | Russia |
Modern equipment for three-dimensional printing and volumetric scanning opens up amazing opportunities for creating and replicating a wide variety of objects.
It is used in a variety of fields, from amateur modeling to medicine. The high performance of modern 3D printers allows you to recreate exact copies of digital models, and if you buy a 3D scanner as an add-on, you can quickly digitize any objects. However, do not forget that the performance of this equipment directly depends on the timeliness of service and the quality of the consumables used. In our shop you will find a wide range of accessories that will allow you to constantly maintain a high level of performance and insure your equipment against premature wear.
Direct supply from the manufacturer
Our company is the official distributor of leading manufacturers of desktop and industrial 3D equipment (3D printers, 3D scanners, 3D manipulators) - Raise3D, FlashForge, Anycubic, Formlabs, Creality3D, PICASO 3D, Phrozen, Wanhao, CreatBot, QIDI, etc.
Own warranty service
We provide professional services for the selection, configuration, training, warranty and post-warranty maintenance of 3D equipment.
Pre-Purchase Demo
Before buying a 3D printer or scanner, you will be able to evaluate the functionality of the model you like in practice in the company's showroom in Moscow, get an online consultation on choosing the optimal equipment model for your tasks.
Free delivery within Russia
We work with the most reliable transport companies and courier services. Delivery of 3D printers is FREE of charge to all regions of the country!
Useful accessories for 3D printing
3D printing
Our article about the spare parts warehouse aroused keen interest among the visitors of the portal, so I would like to share with everyone the information about the availability of useful little things for 3D printing in our warehouse.
1) 3D Systems Build Pad Adhesive, although it was created for Cube series printers, we recommend using it on any printer, especially when printing with ABS on a non-heated pad. When using it, the adhesion of the plastic filaments and the print pad improves.
The kit has a sponge attached to the tube for ease of use.
http://www.cvetmir3d.ru/aksessuary-dlya-3d-printerov/kley-dlya-nagrevatelnykh-ploshchadok-3d-systems-cubestick/
cm and 15x23 cm. This film will allow you to make the bottom surface of the printed models smooth, in addition, it will protect the platform from damage when removing the model. This film is reusable, it can also be applied with glue, which is then easy to wash off.
http://www.cvetmir3d.ru/aksessuary-dlya-3d-printerov/samokleyushchayasya-termoplenka-kapton-30x30-cm/
3) Kapton jobsite tape, available in two sizes 33m x 15cm and 33m x 25mm. Unlike films, adhesive tape is very thin and will need to be glued every time you print, but for the same reason, it will practically not reduce the heating temperature of the table, which is important when printing with ABS plastic.
http://www.cvetmir3d.ru/aksessuary-dlya-3d-printerov/samokleyushchiysya-skotch-kapton-33m-x-15-cm/
4) DAVID matting spray.
Designed for application to glossy objects for their subsequent 3D scanning.
http://www.cvetmir3d.ru/3d-skanery/3d-coating-spray-david/
eighteen
Subscribe to the author
Subscribe
Don't want
The use of 3D printers in construction is becoming commonplace. This year was no exception, even...
Read more
ten
Subscribe to the author
Subscribe
Don't want
Introduction
So, good day to all! This is my second post...
Read more
304
Subscribe to the author
Subscribe
Don't want
Hello dear community!
If the experiment was successful, then something is wrong here.
