Home » Misc » Solidscape 3d wax printer

Solidscape 3d wax printer


Your professional 3D WAX - Printer

SOLIDSCAPE 3D WAX PRINTERS


"When Precision Counts"

  • The reference of 3D Wax Patterns for Casting
  • The 3D WAX – Printer uses heated ( 115 – 120°C ) wax droplets, which are “jetted” through a special highly sofisticated nozzle on a special buildplatform. ( Foam )
  • The use of 2 different wax-materials ( Build and Support Wax ) result in an extremely accurate model and smooth surface. The used wax has “0%” residu during burn-out.
  • Principal market is the Jewellery ( Fashion ) industry. But also the Industrial Industry, where the “lost wax”-technology is used and high precision is needed, will benefit of these printers.
  • SolidScape Inc. is the absolute “Market Leader” and reference for the 3D Wax – Printers
  • The S325, delivers the extraordinary precision you need at the right price and production performance.

Specifications

  • Building envelope : 152,4×152,4×101,6mm
  • Layer Thickness : 25,4µm
  • Resolution( X,Y,Z ) : 5000x5000x8000 dpi
  • Software : 3Z Works
  • Plug and Print
  • Fully automated Calibration Process
  • Power : 230VAC, 10 A, Weight : 34kg
  • LxWxH : 558x495x419mm
  • “Best Price/Performance”

Specifications

  • Building envelope : 152,4×152,4×101,6mm
  • Layer Thickness : 38 µm
  • Resolution( X,Y,Z ) : 5000x5000x8000 dpi
  • Software : 3Z Works
  • Plug and Print
  • Fully automated Calibration Process
  • Power : 230VAC, 10 A, Weight : 34kg
  • LxWxH : 558x495x419mm
  • “Best Price/Performance”

3Z STUDIO


"Entrance level Model"

Specifications

  • Building envelope : 152,4×152,4×50,8mm
  • Layer Thickness : 6,3 – 25,2µm
  • Resolution( X,Y,Z ) : 5000x5000x8000 dpi
  • Software : 3Z Works
  • Plug and Print
  • Fully automated Calibration Process
  • Power : 230VAC, 10 A, Weight : 34kg
  • LxWxH : 558x495x419mm
  • “Jewelry Perfection Simplified”

S350


" Full Layer Thickness"

Specifications

  • Building envelope : 152,4×152,4×101,6mm
  • Layer Thickness : 6,3 – 38 µm
  • Resolution( X,Y,Z ) : 5000x5000x8000 dpi
  • Software : ModelWorks
  • Plug and Print
  • Fully automated Calibration Process
  • LxWxH : 375x545x470mm
  • Power : 230VAC, 10 A, Weight : 36kg
  • “Speed and Precision”

S360-XDP


"Speed-Quality-Flexibility"

Specifications

  • Building envelope : 152,4×152,4×101,6mm
  • Layer Thickness : 6,3 – 38 µm
  • Resolution( X,Y,Z ) : 5000x5000x8000 dpi
  • Software : ModelWorks
  • Plug and Print
  • Fully automated Calibration Process
  • LxWxH : 375x545x470mm
  • Power : 230VAC, 10 A, Weight : 36kg
  • “Speed and Precision”

Download Specifications

Video

Contact Us

S370


"When Speed counts"

Specifications

  • Building envelope : 152,4×152,4×101,6mm
  • Layer Thickness : 25,2 – 50,4 µm
  • Resolution( X,Y,Z ) : 5000x5000x8000 dpi
  • Software : ModelWorks
  • Plug and Print
  • Fully automated Calibration Process
  • LxWxH : 375x545x470mm
  • Power : 230VAC, 10 A, Weight : 36kg
  • “Precision+Performance”

Download Specifications

Video

Contact Us

S390


"New & Fastest" SolidJet Technology

Specifications

  • Building envelope : 152,4×152,4×101,6mm
  • Layer Thickness : 25,2 – 50,4 µm
  • Resolution( X,Y,Z ) : 5000x5000x8000 dpi
  • Software : ModelWorks
  • Plug and Print
  • Fully automated Calibration Process
  • LxWxH : 375x545x470mm
  • Power : 230VAC, 10 A, Weight : 36kg
  • “Solidjet Technology”

Download Specifications

Video

Contact Us

If you need more information about our products

Castable Wax HD(Solidscape) - 3DCompare.

com

Pricing: $28.57/cm3

Minimum Cost:$25

Lead Time: 4 days

Max Print Size(mm):
152 x 152 x 50

Min Print Size(mm):
1 x 1 x 1

Layer Heights(mm):
0.016, 0.032

Dimensional Accuracy:
±0.1 mm

Smooth: 5/5

Detail: 5/5

Accuracy: 5/5

Rigidity: 3/5

Flexibility: 2/5

  • Complex designs with intricate details
  • Fine-detail models with smooth surfaces
  • Sales, marketing and exhibition models
  • Jewelry, art
  • Cases, holders, adapters
  • Large models
  • Functional prototyping and testing

    • Skyblue


    Watertight

    Foodsafe

    Glue-able

    Recycleable

    Biocompatible

    Biodegradable

    Additive Manufacturing

    Min Supported Wall Thickness:0. 3mm A supported wall is one connected to other walls on two or more sides.

    Min Unsupported Wall Thickness: 0.6mm An unsupported wall is one connected to other walls on less than two sides.

    Min Supported Wires:0.3mm A wire is a feature whose length is greater than five times its width. A supported wire is connected to walls on both sides.

    Min Unsupported Wires:0.8mm A wire is a feature whose length is greater than five times its width. An unsupported wire is connected to walls on less than two sides.

    Min Engraved Detail:0.1mm A detail is a feature whose length is less than twice its width. Engraved or debossed details go into a surface.

    Min Escape Holes:4mm

    Min Clearance:0.2mm Clearance is the space between any two parts, walls or wires. To ensure a successful product, make the clearance between parts, walls, and wires greater than the indicated minimum. If your clearance is too small, try making the gap bigger, or consider fusing the parts or features if their independence is unnecessary. You can also try a material with a smaller minimum clearance.

    Interlocking/moving or enclosed parts?Yes Sometimes the interlocking/moving parts can't be printed, since the supports inside the cross section can't be removed.

    Require Support Material?Yes Because each layer needs to build off the last, for some material, angles of more than 45 degrees generally require supports to be printed along with the design. Supports are not inherently detrimental for your design, but they do add complexity to the printing process and lead to less smooth finish on overhanging parts.

    Solid Scape 3Z Pro 3D Printer with Warranty, Super Accurate Wax Printing

    Solid Scape 3Z Pro 3D Printer with Guarantee, Super Accurate Wax Printing - MILABO

    Product catalog

    Product catalog

    • Main
    • Description
    • Reviews 0

    3D printer Solid Scape 3Z Pro is a jewelry 3D printer for printing jewelry stencils with the highest precision in the world. This printer prints stencils with 100% casting wax, which makes this model the most advanced stencil technology available today. The Solid Scape 3Z Pro printer is fully equipped with everything you need and performs work tasks in a jewelry factory. This model works with two printing components: blue wax for the model and red wax for support. This is the only technology that prints with two waxes at the same time, which allows you to achieve high quality printing. Blue wax serves as the basis for the model, and red auxiliary. Auxiliary wax, serves to support the model during printing, which allows you to make the most complex jewelry designs. Also company Solid Scape has developed the easiest way to remove these very supports, with a special solution in which the printed model is immersed and when this liquid is heated, the red wax completely dissolves. The high speed of the press, will allow to execute the most difficult order in the shortest possible time. This model 3D printer Solid Scape 3Z Pro has a compact size and weight. We guarantee stable operation. The use of original wax contributes to a wider range of work. This 3D printer model is the easiest to use, more than 95% of all settings are automatic. The printer will perform the print head cleaning, precision test and weight test by itself. The automatic scanning system allows you to detect any inaccuracies in the printing process and eliminate them. Printer Solid Scape 3Z Pro is able to work up to 5 days in automatic printing mode, this is incredible autonomy. The availability of official technical service will not leave you alone with questions. Technical support guarantees the implementation of all mandatory procedures related to ensuring the continuous operation of this printer. This model has a 12 month warranty. It is possible to purchase without a guarantee with a significant discount. We also remind you that from 07/01/2017, Solid Scape decided to discontinue the production of the SolidScape 76 Pluse 3D printer model and there are certain difficulties with finding components.

    This Solid Scape 3Z 3Pro 3D printer can be delivered to Russia , Moldova , Poland , Germany , Turkey .