Small 3d printing projects

51 Cool Things to 3D Print (2022) – Clever Creations

Image: Marvin via PrusaPrinters

Our site is reader-supported. When you buy via the affiliate links on this site, we will receive a commission at no cost to you. All opinions remain our own. Learn more

One of the struggles of owning a 3D printer is deciding what cool prints to make next. With so many 3D model sharing websites, there are endless 3D print ideas to try.

In this article, we’ll give you our top picks for the coolest 3D printer projects and show you where you can find the models you need.

Top 3D Printing Projects and Ideas in 2022

Elastic Football

This two-player elastic football game uses rubber bands to make the player pieces flexible in order to manipulate the small ball across the printed field. The sides of the playing field have an abacus-style point counter for both players and a lever to control the goalie piece on the back.

Designed by: Wilko_SLO
Where to get: PrusaPrinters

Mechanical Wall Clock

Clocks are fairly complex and cool in general, but 3D printed clocks like this one by Hairald are especially interesting to look at. This design is fully printed and does not use any electronics or batteries.

The mechanism uses a wind-up method with a hand crank and a hanging weight to move the gears using the force of the falling weight. You can watch a video of this particular clock in action here.

Designed by: Hairald
Where to get: PrusaPrinters

Squid Game - Front Man Mask

Can’t get enough of Netflix’s Squid Game? Neither could the designer of this front man mask. Print this model for an interesting decor piece to hang on the wall or use it to finish off your best cosplay outfit.

Designed by: r1nce
Where to get: PrusaPrinters

Articulating Raspberry Pi Camera Mount

While the best 3D printers come with a built-in camera option for creating time lapse videos and remotely monitoring prints, you can also add this functionality to any 3D printer that does not natively have it.

This articulated camera mount uses a Raspberry Pi controller to bring a fully flexible camera option for remote viewing, time lapse recording, or taking stills of your prints as they are in progress.

Designed by: Sneaks
Where to get: PrusaPrinters

Original Simpsons TV

Keep a little ode to the Simpson’s on your shelf or desk with this miniature recreation of the original TV set from the show.

This design uses a Raspberry Pi and other inexpensive components to create a working miniature television screen that plays videos on loop.

Designed by: buba447
Where to get: Thingiverse

Charger Cable Organizer

The only thing more annoying than an unorganized wad of chargers and cables is a tangled unorganized wad of chargers and cables. These printable organizers store your chargers when not in use, keeping them tidy and protected from other cords.

They work like small spools, letting you unwind the charger only as far as you need. When you’re done using the cable, you just twist the lid to wind the cord back up.

Designed by: DFV Tech
Where to get: PrusaPrinters

Screw Measuring Tool

Nothing slows you down more than a container full of mixed-together mystery screws and bolts. This screw measure tool is easy to print and has all the most common bolt and screw sizes to help you quickly identify the size and type of errant bolts, screws, or nuts.

Designed by: MattG
Where to get: PrusaPrinters

Rugged Desktop Organizer

Keep your desk tidy and your office supplies close at hand with this multipurpose desktop organizer. It has built-in slots for your USB sticks, SD and micro SD cards, and compartments for your pens, scissors, and any other tools you use on the regular.

Designed by: Byzantium3D
Where to get: Cults

Giroid Vase

Both functional and beautiful, this giroid vase is a fast and easy print project that doesn’t require any supports or serious post-processing work.

If you don’t intend to use it with water (such as when using silk flowers), it’s ready to use right off the build plate. However, if you plan to use it as a traditional vase, it is best to spray it with some sort of sealant to keep the water from leaking through the print layers.

Designed by: Area3D
Where to get: Thingiverse

Marble Maze

You’ll need to move the zen garden on your office desk, because this printed marble maze is the clear cure for office boredom. Fully printable (aside from the marble, of course) and easy to assemble, this design uses snap-together ball and socket joints on the parts to avoid glue or other adhesives.

Designed by: ericman314
Where to get: PrusaPrinters

Cute Caravan Birdhouse

Camping enthusiasts rejoice: now the wildlife can also enjoy the charm of a vintage camper with these cute caravan birdhouses. You’ll need to 3D print the two colors separately before gluing the 3D prints together for a cute two-toned effect. This build fits on most print bed sizes.

Designed by: PA1
Where to get: Cults

Drippy Bucket

Add a little pop art to your work or living space with the drippy bucket. Printed as three separate pieces, the handle and paint drips both snap onto the main bucket without glue or screws required. It’s the perfect container for pens, dice, or even loose change.

Designed by: davemoneysign
Where to get: PrusaPrinters

Fractal Vise

Not only is this fractal vise model extremely cool-looking, it is also an incredibly useful tool once fully assembled.

This project requires quite a bit of hardware, including multiple sizes of bolts and screws, as well as lengths of both smooth and threaded rods. Assembling the vise is also quite time-consuming, but the designer thankfully has a video tutorial outlining the whole process.

Designed by: TeachingTech
Where to get: Thingiverse

Squeeze Fan

This hand-powered squeeze fan is as useful as it is fun. Using the handle pushes the inner gears and turns the propellers. This design is perfect for camping trips, emergency kits, and other scenarios where power or batteries might be hard to come by.

Designed by: GeorgeZSL
Where to get: Thingiverse

Face Shield

With the pandemic still in full swing, personal protection equipment is as important as ever. This basic face shield was designed by the Prusa research team and gained EU certification as a viable personal protection tool.

Whether you are still looking for protective methods from COVID-19 or work in an industry that requires face shields, this model is fast and easy to print.

Designed by: Prusa Research
Where to get: PrusaPrinters

Lithophane Moon Lamp

This project uses a lithophane model that maps the actual surface topography of the moon to make a realistic miniature rendering of it. This version adds tripod legs and a hole on the bottom for a light to make it a functional, beautiful lamp.

Designed by: Frank Deschner
Where to get: PrusaPrinters

Landy Mini

If you think this is a basic miniature car model, think again. Assembled with only a handful of screws, the Landy Mini has a fully functioning suspension system.

Though it’s a bit time-consuming to print and assemble, the Landy Mini is a fun and well-designed project that would look great on a desk or shelf in your home or office.

Designed by: 3D Sets
Where to get: PrusaPrinters

Self-Watering Planter

Love plants but have a brown thumb? This self-watering planter slowly feeds in water from a reservoir as the soil dries. So even if you forget to water them for a few days (or weeks, let’s be honest), they’ll still get the care they need.

Designed by: Mikolas Zuza
Where to get: PrusaPrinters

Split-Flap Display

Based on the split-flap displays of the past, this model uses a handful of components and a wireless adapter to make a DIY digital split-flap display that connects to your network. You can program it to work as a clock, calendar, message board, or whatever else you can think of.

Designed by: David Kingsman
Where to get: PrusaPrinters

Cryptex

Inspired by the Da Vinci Code, this cryptex has a small compartment to hide things like candies, jewelry, or notes inside. You can program the cryptex to open for a specific series of letters, much like a combination lock.

While this is in no way a secure place to store anything valuable (it is printed from plastic, after all), it’s a funny way to keep coworkers out of your sweets, to give someone a gift, or to play a game with your kids.

Recommended:

The 8 Best 3D Printers for Kids

Designed by: Cees
Where to get: PrusaPrinters

Bag Clip

A stark improvement on the chip clips of old, this clip prints in place with minimal supports. It uses a three-hinge system, so it stays on the bag more securely without slipping off. If you want something that will be quick and easy to print, this is a great option.

Designed by: Andrei
Where to get: PrusaPrinters

Rotating Rings Toy

The mini gyroscope has remained one of the most popular fidget toys in the 3D printing community for several years, most likely due to its unique design. It prints in place and can be used right off the build plate.

Designed by: Marvin
Where to get: PrusaPrinters

Mantis Clamp

The mantis clamp is an interesting take on a vise design, using a hand crank and gears to tighten and loosen the clamp. As illustrated in the photo below, that makes it a handy device for holding up small things like electronics components, painting miniatures, and so on.

Designed by: zuberio
Where to get: PrusaPrinters

Deadpool Bust

This fine-detailed Deadpool bust is a great novelty item for any Marvel fan. Printing this model in 3D printer resin on a resin 3D printer maintains the model’s high level of detail, whereas using a metallic filament like CopperFill or BronzeFill on a fused deposition modeling (FDM) 3D printer will give it the appearance of a metal cast statue.

Designed by: Eastman
Where to get: PrusaPrinters

Avocado Seed Floater

Sprouting avocado seeds is a little more delicate than just dropping them in some potting soil and hoping for the best. They need to be partially submerged in water for several days for the pits to start growing a sprout. Luckily, this is easy to control with this 3D printed seed floater.

Designed by: Mikolas Zuza
Where to get: PrusaPrinters

Drill Depth Stop

When you need a specific stopping point for your drill bit, these printable drill depth stops are an easy and economical way to keep your drill from going too deeply into your material.

The model offers a variety of sizes that correspond with popular drill bit dimensions, so you should be able to find one that suits your needs regardless of which drill bit size you use.

Designed by: Highrise Workshop
Where to get: PrusaPrinters

Sunflower Clock

Unlike the other clock we shared in this list, this beautiful design is a fully functional wall clock with added electronic components. This clock has a lot of different pieces to print, thanks to the thin bands of PETG used for the petals. It takes some time to assemble, but the final look is worth the effort.

Designed by: Romano Rugeri
Where to get: PrusaPrinters

Cute Skull Lamp

We’d say these skull lamps are a perfect addition to your Halloween decor, but they’re so adorable that you’ll probably want to keep them up year-round. They are easy to print and only take an inexpensive strand of LED lights and a few batteries to assemble them.

Designed by: rayjizza
Where to get: PrusaPrinters

Ancient Guardian from Zelda BOTW

Any Nintendo gamers reading this will automatically know what these deceptively innocent-looking articulated robots are, and probably started sweating and hearing dramatic piano music the moment they spotted them.

But if you haven’t been totally traumatized yet by the ancient guardians during your BOTW playthrough, these models are a must-print item. The legs are fully articulated and print in place, so you can just pop the entire figure off the build plate and immediately start your campaign to bring down Hyrule.

Designed by: Crafty Sven
Where to get: PrusaPrinters

Ornamental Bulbasaur

If you haven’t gotten enough Bulbasaur from Bulbasaur planters, low-poly figurines, or Pokemon chess sets, you’re in luck. This ornamental Bulbasaur model is one in a set of three decorative Pokemon models that you can print for free.

Since the model uses a lot of Victorian filigree elements, it looks fantastic with a metallic finish, especially with a patina. They acquired that look in the photo below using paint, but metal-filled filaments or cold casting the model in resin are two other possibilities for making this model look its best.

Designed by: Psdwizzard
Where to get: Thingiverse

3D Printable Drone

For a functional mini-drone, this design works well and is a lot of fun to use. Designed around a battery case for a single lithium battery, it is not going to be very powerful. However, it does work and it is a good beginner project for those wanting to learn how to 3D print and build more capable drones.

Designed by: David Cledon
Where to get: Thingiverse

Back Loaded Horn Speaker

This little printed speaker transforms into a powerful Bluetooth speaker with a little assembly and about $20 in components. Even better, the designer includes a wiring diagram and full assembly instructions along with the free STL, so even if you are new to this type of project, you can easily follow along.

Designed by: guppyk
Where to get: Thingiverse

Among Us Crew/Body/Ghost/Imposter

This five-piece set of Among Us models is a fun project for fans of the game. With all of the character types in the game available, you can vary the colors of each model to account for any possible in-game combination.

Designed by: WalRit
Where to get: Thingiverse

Print-in-Place Bearings

If you need bearings for one of your projects or you just want to give your printer a nice torture test to check its calibration, these print-in-place bearings are the answer. Designed in five common sizes, these models should have all the options you need for most projects.

Designed by: guppyk
Where to get: Thingiverse

Helmet Hanger

Both functional and decorative, this 3D printing project is the perfect solution for storing your helmet while also showing it off. The model is easy to print and allows for printing the sphere whole with supports or in two pieces without supports (to glue together after).

Designed by: Sergi Lorenzo
Where to get: Thingiverse

Tensegrity Table

When regular furniture gets too boring, choose some that appears to defy physics instead. This small table ties the bottom and top parts together with string, and the tension keeps the table parts upright. While the designer used blue string, a clear string is ideal because it’s harder to see and makes the table really look like it’s floating.

Designed by: Austin Steingrube
Where to get: Thingiverse

Hydroponic Self-Watering Seeds Starter

Another model for the gardening-challenged, these cute self-watering planters will keep your plants watered and nourished even if you don’t. The planter comes in five different poses, with some sitting flat and others dangling their legs over a ledge, you can get really creative in staging your planter people on your desk, table, or shelf.

Designed by: Studio Aditivo
Where to get: PrusaPrinter

Print-in-Place Briefcase

Need a place to store your miniature work documents? What about your doll-sized stacks of money? This print-in-place briefcase does exactly what it says: it prints a miniature briefcase in one piece with fully functioning hinges and latches straight off the build plate.

This model (and other print-in-place projects) are a good way to test your printer’s calibration and to see where it’s having issues.

Designed by: Dehapro
Where to get: Cults

Bone Fingers

These articulated bone fingers bend with your fingers, making their movements look incredibly realistic. The project requires quite a bit of gluing and assembly after printing, but they are a stunning addition to cosplay outfits and Halloween costumes.

Designed by: Littletup
Where to get: Cults

Lazy Dogs

Yet another print-in-place project on the list. These adorable canines have articulated hinges in their body that gives them a wider range of flexibility. While they are mainly for decorative (or playful) purposes, these little dogs are quite popular with kids.

Designed by: Mcgybeer
Where to get: Cults

Hexagonal LED Panels

DIY printed light fixtures are one of the easiest ways to customize your decor, and these hexagonal LED panels are one of the best options we’ve seen.

Each hexagon light is printed and assembled separately before being fit together, which leaves plenty of room for creativity. Each light panel could have a different LED color, or work through a controller to loop through certain behaviors like blinking, twinkling, or transitioning through the RGB spectrum.

Designed by: Jim Misel
Where to get: Thingiverse

Mechanical Quick Grab/Release Phone Stand

This phone stand tightens around the phone when it’s placed in the cradle and loosens when the phone is lifted off. It also rotates the phone up, down, and side to side while it is in the holder for optimal viewing at any angle.

Designed by: Arron Mollet
Where to get: Thingiverse

Slim Credit Card Wallet

When you want the bare essentials to keep your pockets from being weighed down, a card wallet is an essential accessory. This particular one is fully printed and comes with the added bonus of an ejector button to help you easily remove your cards when you need them.

Designed by: Aljaz Titoric
Where to get: Thingiverse

Measuring Cube

A modern take on the old concept of measuring cups, these cubes are a fun way to incorporate the different measurement sizes into one piece. However, we don’t recommend using them for liquids in the kitchen since the small gaps between layers in 3D prints are not watertight.

Designed by: Matt Stengler
Where to get: Thingiverse

Thor Hammer

One of the more iconic Marvel props in the 3D printing community, Thor’s hammer is easy to print and looks great on display. While it has a lot of fine details that would be best captured with a resin 3D printer, it will be challenging to print it at full scale on most consumer resin printers.

Designed by: Rob Pauza
Where to get: MyMiniFactory

CNC Machine

One of the best things about having a 3D printer is the ability to use it to produce additional printers or machines. This CNC machine is a perfect example of that. It uses 3D printed joints to assemble the rails, motors, and carving tool into a fully functional CNC.

Designed by: Creative Think
Where to get: Thingiverse

Raspberry Pi 4 Case

In case you missed it, this list is full of projects and ideas that use Raspberry Pi boards as the controller. Being small, cheap, and surprisingly flexible in its capabilities, the Pi lends itself extremely well to 3D printing.

With that in mind, it’s no surprise that you can find dozens of models for Raspberry Pi cases on most of the project sharing websites. This one has one of the more attractive and functional designs available.

Designed by: Carter
Where to get: PrusaPrinters

Prusa Enclosure

Enclosures are often a necessity for printing ABS and other high-temperature filaments successfully, but DIY and budget printers rarely have them incorporated into their design. Fully enclosed 3D printers do exist, but they come at a price. Thankfully, enclosures are not overly difficult to make yourself, especially when upcycling existing furniture like this build.

This project gives you all the pieces needed to turn an IKEA Lack table into a functional 3D printing enclosure and filament station. While it is specifically designed for Prusa 3D printers, any printer that fits on a Lack table should work with this project.

Recommended:

9 Amazing DIY 3D Printer Enclosure Ideas

Designed by: Ondřej Stříteský
Where to get: PrusaPrinters

Fidget Infinity Cube

While fidget toys are always a popular category for 3D printing, these fidget cubes are especially interesting. Using a hinge design, you can fold and unfold the cubes in multiple directions.

This model prints flat and requires no assembly after printing. Since the hinges print in place, this project may take some experimentation with printer settings and calibration before it is printed successfully. The designer includes a test print with the model files so you can quickly try out different print settings without printing the full model.

Designed by: Austin Vojta
Where to get: PrusaPrinters

Addams Family Thing

Yet another spooky prop on the list, the Thing from the Addams Family is a great item to add to your Halloween decor. This is a model with a high level of detail (especially around the knuckles and nail beds) that would do well with resin printing.

Recommended:

Resin vs Filament 3D Printers: What’s the Difference?

Designed by: Js-studio
Where to get: PrusaPrinters

Collapsible Basket

Our final pick for print-in-place designs, the collapsible basket is fun to print, cool to use, and easy to put in storage when you don’t need it.

Designed by: 3D Printing World
Where to get: PrusaPrinters

Conclusion

Those were 51 of the coolest free 3D printing models! Did you like our picks? Have you printed any of these models before? Let us know in the comment section down below!

Scroll to Top

3D Printing Projects - Instructables

Infinity Stone Watch by alan0001 in Costumes & Cosplay

Star Wars Deathstar Signage by Muhammad FasyaD in 3D Printing

3D Printed Tardis With Sound and Fading Lights by Calebs in 3D Printing

2 34

3d Model Animal Cell for the Classroom by lamichhanebis in Science

Build Your Own Quadruped Robot Using Tinkercad by PJ2000 in 3D Printing

2 80

Automatic Power Off Your 3D Printer With Octoprint by dawidma in 3D Printing

2 156

3d Printed 'cork' Bottle Stopper by mrsmerwin in 3D Printing

114

Faux Barbed Wire Choker and Bracelet - Flexible 3D Print by Penolopy Bulnick in 3D Printing

1 34 3. 3K

INNER WALL SPEED Effects on OUTSIDE PRINT QUALITY (Close-Up COMPARISON) by diyperspective in 3D Printing

2 295

How to Design the Best Wind Farm Blade in Tinkercad - a STEM Challenge & Lesson Plan for Teachers by MyStemKits in Math

41 6.9K

Blastoise Humidifier by Muhammad FasyaD in 3D Printing

7 618

Easy Build Heat Set Insert Press by Maker-Mike in 3D Printing

16 888

Forged Fabric Parts!!?. . With 3D Printed Compression Molds by JGJMatt in 3D Printing

Runner Up 102 4.9K

3D Printed Good Habits Tracker by Ondřej Beneš in 3D Printing

9 509

Life Sized Talking BMO From Adventure Time (that's Also an Octoprint Server!) by katzcreates in 3D Printing

85 7.3K

3D PRINT a STEAM TRAIN 🚂 With Live Camera Streaming and Wifi Controls by DIY Machines in 3D Printing

First Prize 236 35K

Cut 3D Print Times in Half With Negative Volume Printing by MechanicalMashup in 3D Printing

8 909

Are Expensive Nozzles OVERRATED? by diyperspective in 3D Printing

9 14K

Maze Cube by aswd1234567891011 in 3D Printing

2 192

A 3D Printed Slinky Machine by gzumwalt in 3D Printing

2 15 716

3D Printed Mouse - Vaxee Outset AX Inspired - Ajazz I305 Internals by MechaMouse in 3D Printing

Runner Up 7 590

Creating a Hot Air Ballon Using Tinkercad by sarahcath in 3D Design

8 1. 6K

Marblevator, Golf by gzumwalt in 3D Printing

1 29 2.4K

Furkan`s Cheap MicroAlgae Filter by furkanguzel161 in 3D Printing

Runner Up 4 556

Make an Ostrich Egg Lamp by alatorre in Reuse

Second Prize 36 6.8K

Egg Topper -Tinkercad basics by sigritom in 3D Printing

First Prize 1 34 3. 1K

3d Printed Braille Business Card (Double Sided) by LakerMakersClub in 3D Printing

5 218

Making Life-size Todo 360! (Cad Bane's Droid - Star Wars) by 3Demon-3Dprint in 3D Printing

14 819

How to Clean 3D Printer Nozzle by Burning Off the Plastic by Maker-Mike in 3D Printing

8 440

Blade Runner 2049 Joi Emanator by MatterWiz in Costumes & Cosplay

Runner Up 5 1. 0K

Fume Extractor by Arnov Sharma in 3D Printing

21 1.5K

Replace Power Button on the BIQU Magician 3D Printer by andymenon in 3D Printing

1 273

3D Print-It-Yourself Workshop Vacuum Extension Handle by DwarMeji in 3D Printing

3 164

Teaching With TinkerCAD - 3D Printed Keyrings by Faisal A in 3D Printing

25 1. 1K

Ultimate (On a Budget) Home Vacuum by Icelandian in 3D Printing

Runner Up 44 5.5K

Tim's Hybrid Harmonic Drive by Palingenesis in 3D Printing

10 1.1K

3D Printed Multi-Angle Drill Guide by Kartik_Nanduri in 3D Printing

99 6.7K

Model Paint Shaker by Muhammad FasyaD in 3D Printing

Runner Up 47 3. 3K

Slidee: Non-motorized Automatic Camera Slider by Shivam Dehinwal in 3D Printing

Second Prize 103 6.1K

Jurassic Park Gate Remote Control by Muhammad FasyaD in 3D Printing

Judges Prize 32 4.2K

Creating and Using Shapes in Tinkercad by sarahcath in 3D Printing

5 355

Yidimu Falcon Pro Display Replacement Hack by andymid2001. 3d in 3D Printing

1 160

3D Printer FAN PWM NOISE 100% Elimination by diyperspective in 3D Printing

5 1.0K

Creating a Colorful Umbrella With Tinkercad by sarahcath in 3D Printing

188

Tool for Making Soil Blocks (3D Printed) by DonnaCohn in Gardening

Runner Up 1 72 4. 8K

DIY 3D Printed Robotic Arm Actuator by Kendrickxy in 3D Printing

12 1.1K

Silent Omni-Directional Desk Fan by JGJMatt in 3D Printing

Runner Up 109 6.1K

Smack Activated Cat Toy 🐈 by JGJMatt in 3D Printing

Runner Up 46 2.1K

3D Print Cat Toy by Backj in 3D Printing

5 341

Pet Bowl Riser - 3D Printing by garweb in Pets

Runner Up 18 1. 3K

Cat and Dog Selective Feeder by tomasdiazwahl in 3D Printing

First Prize 85 7.8K

Porch Plank Distance by Henkeify in Woodworking

10 612

Brush and Display Together: Camera Lucida for Light Strokes by RichardGreene in Digital Graphics

Runner Up 22 1.7K

3D Printer Enclosure - Wood With Acrylic Windows by poprhythm in 3D Printing

Runner Up 129 5. 4K

XMod - an Affordable, Modular, and Sustainable Alternative to Traditional Housing by Pro_Maker in 3D Printing

Second Prize 10 1.2K

DIY Dog Nametag by Charles Projects in 3D Printing

8 522

217416670000000000000000000000:1 Cycloidal Drive by ShirdelY in 3D Printing

32 5.5K

Mushroom Lantern House by gartmakesthings in 3D Printing

Runner Up 13 540

Custom Color Art Board by cfb70 in 3D Printing

First Prize 90 15K

YXQ-1 Valkyrie: 3D Printed EDF Flying Wing R/C Airplane - Part 1 by gusflus in 3D Printing

Second Prize 32 1. 8K

50 3D Printing Ideas

It looks like we'll soon be drowning in useless stuff made for 3D printing projects. But you can do something that will really be useful! If you're running out of ideas, here's a list of 50 3D printable items you're unlikely to throw away.

Bag clip with screw cap

Now the bag clip will have a new feature - a hole with a lid for quick access, as in the photo. This clip is easy to print and convenient to use. Strange that no one thought of this before.

Author: Minkix

Download: Thingiverse

Modular Furniture Connector

This connector allows you to quickly assemble modular furniture. The default model is designed for 17×17 mm wood, but the size and material can be changed to suit your needs using a parametric file for customization.

Author: LeFabShop

Where to download: Cults

Sealant cap

No more throwing open sealant tubes away. The screw cap for the nozzle presses the o-ring tightly against the body of the tube and closes the access of air to the solvents inside.

Author: The-Mechanic

Where to download: Thingiverse

Laptop niche

Now the laptop will always be at hand, but hidden from prying eyes in a special niche that is attached to the bottom of any coffee table.

Author: Too Snide

Download: Thingiverse

Phone holder - Candice

Elegant and simple, perhaps the easiest thing you can print on a 3D printer.

Author: Clem.C2

Where to download: Cults

Polypanels

The idea for Polypanels came from Devin Montes. A polypanel is a series of three-dimensional building blocks. The individual elements of a Polypanel look simple, but if you print a lot of them and different types, you can create all sorts of complex designs. Something like LEGO where you can design each brick.

Author: MakeAnything

Where to download: MyMiniFactory

Coat Hook

This coat hook is designed as an E3D attachment and can be printed multiple times to fit all your clothes.

Author: Filar3D

Where to download: Cults

Plant Pot

This anatomical brain flower pot is easier to print than it looks, creator DrFemPop says. For assembly, it is only necessary to glue the parts after printing. It turns out an original house for plants.

Author: DrFemPop

Where to download: Cults

Door Holder

This is a simple solution for holding a door. Double-sided adhesive tape is sufficient for surface mounting.

Author: Akiraraiser

Where to download: Thingiverse

Piggy bank

A simple piggy bank for beginners, no complicated settings.

Author: lecaramel

Where to download: Thingiverse

Cable ties

This tie is perhaps the simplest and most ingenious of all devices. Clips are printed as a whole sheet at once, and then the required amount can be cut off from it.

Author: Sunshine

Where to download: Cults

Roller ruler

An indispensable device if you need to measure the length of something non-linear: a piece of rope, a curved line, a perimeter with bends, etc. The ruler is called Geneva and has step 5 mm.

Author: MechEngineerMike

Where to download: Thingiverse

Pliers

This small, solid piece of plastic can easily replace your pliers / pliers. These forceps take the force to the handles and redistribute it at the end of the grip. It's definitely pliers. Just smarter.

Author: BYU CMR

Where to download: Thingiverse

Cylindrical textured box

Beautiful tube from Syboulette decorated with hexagons. Well suited as a kitchen utensil for storing oatmeal, rice and other crumbly substances.

Author: Syboulette

Where to download: Cults

Door stopper

This stopper is modeled after the Guyer Anderson cat statue in the British Museum. The design is hollow, which allows you to fill the limiter with something for additional weight.

Author: Duaneindeed

Where to download: Cults

Plague Doctor Mask

Not exactly the most useful item on the list since bubonic plague is a thing of the past. But a mask can come in handy, for example, when you need to clean up after your pet. And you can also go to the carnival in it.

Author: Odrivious

Download: Cults

Universal Spool Holder

This adjustable spool holder uses a spring and an adjustable rewind clutch. It's the perfect place to store those pesky wires.

Who made it: Vincent Goenhuis

Where to download: Thingiverse

Sturdy waterproof box

This tight-fitting box will keep things from getting wet. Print it in PLA or PETG, add a flexible TPU seal and M3 screws for the spring hinge, and you're done.

Author: ZX82

Where to download: Cults

Dice

This dice is suitable for flat 3D printing and has a face size of 16mm.

Author: Devin Montes (MakeAnything)

Where to download: MyMiniFactory

Collapsible Coat Rack

Really cool coat rack. That's all there is to say about her.

Author: Komaru

Where to download: Thingiverse

Business Card Holder

Great for showing off your new business cards to your Wall Street friends. What could be more delightful than this Zippo card holder with flip-top lid.

Author: PentlandDesigns

Where to download: Cults

Pencil and pen holder

Iceberg or melting beehive? Be that as it may, this is a handy pen and pencil holder that is cheaper to print than to buy.

Author: BeeVeryCreative

Where to download: Cults

Groovi Monster Audio Amplifier

This is a passive smartphone audio amplifier that looks stylish and does the job well. It's called Groovi Monster for a reason.

Author: 3DShook

Where to download: Cults

Cup holder

Can be used not only as a cup holder, but also as a coaster for hot dishes. The dimensions of the template are easily adjusted to suit any size cookware.

Author: jmdbcool

Where to download: Thingiverse

Clamp

Designed for fixing various materials, including the ends of the wire in the coil. Also great as a clothespin replacement.

Author: Med

Where to download: Cults

Pencil Box

Suitable for storing all your desk trivia and trinkets (memory cards, rubber bands, pencils, paper clips, etc.).

Author: Monkey3D

Where to download: Cults

Headphone holder

This is a duck. Yes, you can hang headphones on it.

Author: Toshi_TNE

Download: Thingiverse

Polyhedral Succulent Pot

Unusual geometric pots for your growing succulent collection. These small pots can be configured to be connected together.

Author: PrintFutura

Download: Cults

Survival Whistle

This is a survival whistle with original design. It is durable, easy to make and very loud (118 dB is more than enough to be heard in an emergency).

Author: Joe Zisa

Where to download: Thingiverse

Measuring Cube

Simple and original measuring cube for the kitchen. On each side there are recesses for measuring the volume of ingredients (in cups - according to the American system, and in metric units for everyone else). It is best to print with PETG material, it is the safest for products.

Author: iomaa

Download: Thingiverse

Hinge

This is a parametric hinge that can be sized to fit your needs.

Written by Rohin Gosling

Download: Thingiverse

Car Eyeglass Holder

Attaches to your car's sun visor. Glasses will always be at hand.

Author: Trevor Long

Download: Thingiverse

Opener

The simplest things are usually the most useful. Convenient and easy to print opener. Covers the sharp edges of the cork as much as possible, protecting you from injury.

Author: Jeremy Peterson

Download: Thingiverse

Superhero Keychains

Sometimes you need to remind yourself of your hidden superpowers. Stylish and cool keyrings are well suited as a small gift.

Author: Formbyte

Where to download: Cults

Headphone stand

It will be useful for music lovers and gamers who use headphones a lot and often. After all, now they will no longer roll around anywhere.

Author: MakerBot

Where to download: Thingiverse

Bag Clip

The model consists of two printed parts. Allows you to keep packages closed and keep food fresh longer.

Author: Walter Hsiao

Download: Thingiverse

Plastic wrench

Handy wrench, but don't choose soft plastic to make it.

Author: Daniel Noree

Where to download: Cults

Sliding Decal

No more worrying about whether cups are clean or dirty right now in the dishwasher! With the help of a special mechanism, the slider easily changes the inscription on the plate.

Who made it: MiddleFingerBoss

Where to download: Thingiverse

Collapsible basket

Cool picnic item. A folding square basket with five sections is printed from several parts and then glued together. For product safety, it is recommended to use PETG plastic.

Author: PatternToPrint

Where to download: Cults

Self-watering plant pot

Houseplants are dying from your forgetfulness? This will not happen again! This pot will water them by itself, and your conscience will be clear.

Author: Parallel Goods

Where to download: Cults

Maze Gift Box

Cash is not the most original gift. But if you present them in such a gift box, your friend will surely like it. The lucky recipient will have to work hard to get to the prize, because there is only one right way.

Author: Robert

Download: Thingiverse

Wired headphone holder

The headphones will now be protected from tangling and breakage.

Author: Robert

Where to download: Thingiverse

Tube Squeezer

Will help squeeze out the contents of the tube to the last drop. Wide enough to fit most tubes on the market. Printed in three separate parts.

Author: Justin Otten

Where to download: Thingiverse

Webcam Shutter

The best thing for the paranoid and just for those who are uncomfortable being under the gun of a webcam. Instead of sticking tape or sticky tape over the lens, attach a slider shutter to the body and open it when you need a video call.

Author: Horizon Lab

Where to download: Cults

Hexagonal Prefabricated Drawers

Useful to free your desk from the noodles of cables, wires and just every little thing. The design can be easily expanded if necessary.

Created by Dan O'Connell

Where to download: Cults

Wall Phone Shelf

Attach the shelf to a power outlet and place your phone on it while charging. The model also has a corner slot that holds your smartphone or tablet upright for watching videos.

Author: Tosh Sayama

Where to download: Cults

Card Shuffle Machine

Awesome item for poker lovers. This device will help to shuffle the cards and deal them during the game.

Author: LarsRb

Where to download: MyMiniFactory

Box with a secret lock

Box for storing things in a place inaccessible to prying eyes with a secret multi-stage opening mechanism.

Author: 3DPrintingWorld

Where to download: Thingiverse

Digital Sundial

Yes, your eyes don't deceive you. This is a digital sundial and it really works. They are designed to pass only the right beams at the right time and at the right angle to display the actual time in 20-minute intervals. Only works during daylight hours, of course.

Author: Mojoptix

Where to download: Thingiverse

Keyring

Designed in the shape of a stylish Swiss Army knife, it looks amazing. Printed from two plates and the keys are held in place with standard hex nuts and bolts.

Author: Craig Blanchette

Where to download: Thingiverse

0511
Subscribe

Don't want

12

Chapter 1. Background. In this article I will talk about why you need a 3D printer at home and what you can do with it. And you can make and print on a 3D printer any part, both plastic and rubber. but the secret of success lies in the fact that it is not enough to have a 3D printer, but you also need to be able to model parts and properly prepare them for the printing process. Anyone can afford to buy a printer, or you can assemble it yourself. But it takes time to learn how to model. A lot of my projects required the manufacture of non-standard parts, which is why the idea of buying a 3D printer was born.

Chapter 2. Exploring the world of 3D printing and technology. My first printer was Anet A8. And like all beginner 3D printers, the first thing I started printing was upgrades for it.

Since stock printers from the budget segment, in my opinion, it is necessary to refine them so that they give more or less good results in printing. I described in detail about all my improvements on the site, who are interested can familiarize themselves with and apply for their Anet (https://3dtoday. ru/blogs/alexforward/konkurscrealityv). The printer turned out to be very functional and gave rise to a new printer with CORE XY kinematics. The printer turned out to be of decent quality and produced a good print result. And most importantly, it was more compact, had its own heat chamber, direct extruder, and the print speed on it was faster. This project is also described in detail by me https://3dtoday.ru/blogs/alexforward/klassnyi-3d-printer-po-tipu-core-xy-iz-orgtexniki-konkurscreality

But these were all finished projects modeled by other people, I just took the best and brought it to life. More serious projects already required the study of 3D modeling programs.

Chapter 3. Program selection and training . To study 3D modeling, I chose Compass 3D from Ascon. I think one of the best programs, since it is used by the majority, Compass is actively used in industry and enterprises, many free study lessons. But the most important factor, my brother, who works as a design engineer at the factory, can easily fix jambs when creating a model or suggest how best to do it. By the way, the program is easy to study on your own and does not require basic skills. I learned it from scratch, having no idea about 3D modeling at all. My first completed projects using Compass 3D and 3D printing were the creation of fittings (legs, handles, plastic dowels, etc.), electronics cases, radio-controlled models.

Toys and accessories.

Tool. I will give an example of my template for installing handles and locks for interior doors. This template is my own developed copy of the existing model on the Internet. In terms of money, the template cost me almost 10 times cheaper than it is sold on the Internet.

But in order to create a part consisting of several parts, and print everything the first time, so that everything fits together, Compass 3D has a wonderful assembly function for this. In it, in fact, you can check whether the parts fit together and immediately make changes and corrections to the model. According to this principle, I implemented projects for the modernization and upgrade of my friends' 3D printers.

JGAurora print carriage upgrade. First, 3D models were made separately. Then, with the help of the assembly, they were brought to mind and adjusted to each other. The carriage became lighter, there was an adjustment of the tension of the belts along the axis, better blowing of the parts and, most importantly, the installation of an E3D V6 hotend.

Full upgrade of Anycubic I3 Mega. But in this project, half of the details were borrowed from other users.

Before

Now

This is just a part of my work. In fact, a huge number of parts and spare parts were printed. Not always everything worked out the first time, especially printing with ABS plastic was hard to master. I mostly print ABS as it is the cheapest material and is easily machined. Yes, it has many disadvantages, but for my purposes, ABS is the best material.

Chapter 4. Summing up. Having received basic knowledge of 3D printing and modeling, I decided to assemble a 3D printer for my purposes, so that it would be an indispensable assistant and meet the following requirements:

1. Printing with ABS plastic - need a hot table and closed case

2. E3D V6 hotend - for fast repair and availability of spare parts at low prices

3. Good print quality and printing speed - fast production of parts

4. Compact - takes up little space on the desktop

5. The printer must be popular with users - a large number of upgrades and the availability of information on maintenance and repair.

Ultimaker Original proved to be ideal for these requirements. This printer has all the files for its creation and refinement in the public domain, produces excellent print quality at high speeds.

To make an airtight chamber from a draft, I developed drawings for the doors and the hood of the printer, since I could not find these parts, and I made a box for tools. As a result, the printer takes up minimal space on the table. Someone will say that it is easier to buy a new one. I do not argue with this, but my goal was to minimize the cost of building a 3D printer, which is several times cheaper than the original.
Learn more

3D printer price in sri lanka

3D printed photograph

How much does ink cost for a 3d printer

Sintron 3d printer kit

Xyz 3d scanner pro

3D body scanner fitness near me

3D print vancouver

Yellow 3d print

Gaps in walls 3d print

Best pro 3d printer

3D printing with clay