Home » Misc » Cube 3d printer software

Cube 3d printer software


Cube 3D Printer Review 2022

3.5

See Price

Since the popularization of 3D printers, and give the inherent difficulty of 3D printing, there’s been demand for affordable, easy to use models that work out of the box.

3D Systems and the widely popularized Cube 3D printer strive to plug that gap. Does it live up the hype? Let’s investigate as we pull apart the secret inner workings of the most stylish printer on the market.

Printing Area152x152x152mm
Print TechPlastic Jet Printing
Supported FilamentABS and PLA
Extruders2
Layer Thickness70 microns and 200 microns

Table of ContentsShow

    Design

    3D Systems is onto its third generation of the Cube with all the enhancements this encompasses. An all-in-one cube casing houses the printer, hence the name, and is advertised primarily as a user-friendly personal desktop model. With simplicity in mind, it aims to introduce first-timers to the world of 3D printing without the oft-complicated installation of entry-level DIY models.

    Straight out of the box, the Cube is a piece of engineering bliss. Aesthetically pleasing, compact, classy, and dare we say, beautiful, it resembles a product distributed by Apple, where functionality and ease of use are as much a consideration as design.

    The sleek white exterior panels are miles away from the functional, bare-bones design of plenty rival models. So much so that the Cube is very much at home sitting alongside other home office devices rather than confined to a workshop. The self-contained shell means keeping track of diverse components isn’t a factor.

    The print area is a modest 152x152x152mm, providing enough working space for most small scale projects, especially for beginners trying their hand at 3D printing for the first time. With both 0.2mm and 0.07mm (200 and 70 microns) print resolution layers, the Cube offers a degree of versatility, but not enough to cater for a large variety of print projects.

    The print head ensures the X-axis, while the PrintPad (read build plate) manages the Y and Z axis. The PrintPad is removable for easy cleaning in hot soapy water. Every print job requires the application of Cube Glue, a weak adhesive produced by 3D Systems that assists the printed filament to solidly in place on the build plate. It takes some practice to apply the appropriate amount, and you need to wait for it to dry enough or suffer the consequences as we did.

    The Cube sports dual extruders for simultaneous double color or material prints housed in out of sight purpose-built plastic casings that sit inside the vertical outer side panels. ABS and PLA are the only supported materials, and the Cube only works with 3D Systems proprietary filament Smart Cartridges that come in a selection of twenty-three colors.

    These are significantly more expensive than generic filament bought from a hobbyist retailer, which was a big con for us when assessing the Cube 3D printer. These materials are of a higher quality, ostensibly, to justify the higher cost. To give 3D Systems its due, the ABS provided is recyclable, while the PLA is compostable, which softens the blow for the environmentally conscious maker. The company also asks users to ship back empty cartridges for recycling.

    Each cartridge includes its own integrated, snap-in nozzle, which it must be said, is incredibly simple to install and, in theory, foregoes the need to battle with removing debris and build up from the extruders every time. Two cartridges come as standard with each new device.

    Connectivity through a USB port mounted on the bottom of the side casing (the package includes a USB flash drive) and a WiFi connection allowing the user to trigger prints from their computer or via a flash drive, gives options.

    3D Systems have even designed a dedicated Cubify mobile app for both Android and iOS (plus  MacOS and Windows through the Cubify software) packed with printing ideas, blueprints, and guides. The software converts into the required file type and forwards the instructions to the printer. It cannot be used to design prints though.

    The user interface, we love. Inviting and perfectly intuitive, it’s hard to go wrong using the in-built 2.5” color touch screen LCD. Beginners should find getting around the settings and options a breeze. Indicators such as how much material is left are welcome additions for users who might not have yet developed the skills to gauge how much filament a project requires.

    Printing

    For a 3D printer touted as an out of the box solution, the printing process was hit or miss. The first few prints went well, especially for smaller prints. The results were generally error-free and full of detail with smooth contours and layers with few flaws. Ghosting was all but absent.

    However, the Cube starts to struggle with larger projects that more often than not end in a bundle of filament only good for the landfill. The waste is especially hard to stomach given the exorbitant cost of the cartridges. The Cube Glue did little to fix the issue but works well for smaller prints.

    Overall, the Cube is ideally suited to small jobs and is relatively economical with the material when it works correctly. From what we can gather, the lack of a heated plate, and the fact the software didn’t factor in the need for supports worked to the detriment of larger prints that require stability and uniform heat distribution as vertical layers build up.

    The Cube is loud, to the point that it can become an annoyance by reverberating into adjacent rooms. For such a little machine, the noise is disproportionate possibly due to clanks bouncing off the casing.

    Where our opinion of the Cube shifted drastically was when we encountered systematic jamming in the jet on the print head. The problem appeared to happen after only a handful of jobs using a brand new cartridge. Either the filament reacts badly to being exposed and goes brittle, or warehouse storage is conducive to the chemical properties of the plastic to harden more than necessary while sitting in the cartridge. It was hard to tell.

    Regardless, we have here a serious design flaw; feeding the filament through a tube doesn’t work well. Once a jam occurs, the nozzle does nothing but churn the plastic into a clumpy mess. If it isn’t a jam, the filament breaks inside the cartridge. There’s not much that can be done other than load in a replacement.

    Speed wise, the Cube isn’t remarkable and gets the job done within acceptable limits.

    Small prints can take anywhere from four to ten hours depending on the size, while bigger jobs were a bust most of the time, so we were never able to finish them to know how long the process takes.

    Assembly

    The Cube comes pre-assembled and only requires the user to install the cartridges, a straightforward procedure. The Cube is packaged well and comes with a quick start manual, USB key, cabling, glue, spatula, plyers, power supply, and the printer itself.

    The Cube self-calibrates by make sure the build plate is perfectly level and at the right distance from the print head via a set of magnets under the plate, although the device asks the user to tweak the plastic circular knobs below the plate as required. The instructions are straightforward and won’t daunt even the most unversed user.

    That aside, the Cube allows you to be up and printing within 45 minutes after unboxing the device, unheard of for printers in this price range where hours of assembly are the name of the game.

    Support

    3D Systems has discontinued the Cube, and the model is no longer in production, arguably due to lackluster reviews caused by the filament jamming issue.

    As a consequence, the Cube is now available at a fraction of the cost of its initial retail price, around the $1000 mark. You can pick one up for around $200-$300 on Amazon, if not less. 3D Systems continues to sell cartridges for the time being, although third-party manufacturers have popped up selling them at a fraction of the cost.

    Support wise, 3D Systems offers a 90-day warranty for parts and labor, but no refunds whatsoever due to discontinuing the product. Specific resellers may offer different refund policies.

    3D Systems has a robust after-sales support service with a dedicated phone team that can help with the jamming issue by walking through a variety of detailed fixes. They’ll also walk through updating the Cubify software to the latest firmware which helps with printing problems to a certain degree. Alongside are forums, guides, and articles about getting the most out of the Cube.

    Verdict

    The Cube isn’t a bad printer overall and produces some quality results for smaller projects. The design is the model’s strongest asset, and it’s hard to find fault with the look, feel, and ease of use (bar the jamming issue).

    At a much-reduced price, the Cube is an ideal no-nonsense first time 3D printer for those who want to experience the joys of printing without the hassle and tinkering of similarly priced DIY equivalents. The dual extruder setup is also a bargain.

    The cartridges are a downside, but if you buy them from a third-party, the costs are more palatable. There’s also a DIY fix for the jamming problem, which isn’t particularly difficult to perform and is an excellent way to introduce a beginner to the modification aspect of the hobby.

    The Cube isn’t ideal, but its hard to argue with for the bargain price.

    Cubify Cube 3 3D Printer Review and Driver Download | SourceDrivers.com

    Cubify Cube 3 3D Printer Review and Driver Download - The 3-D systems dice three is a midrange 3-d printer that can produce gadgets with terrific detail and smooth layers in both PLA and ABS plastic. It is simple to use and would be a brilliant choose for a faculty or workplace that needs problem-loose 3D printing. The cube three has  extruders for dual-coloration printing in 20 shades of ABS and PLA plastic, at the side of wireless and the capacity to govern it from a pc, Mac, iOS or Android device. It makes use of substances in proprietary cartridges from 3-D systems, although, that you have to buy from the corporation and are notably extra costly than typical filament. Cubify Cube 3 3D Printer Review and Driver Download.

    The cube 3 is elegant-searching, with a smooth, clever layout and nearly Apple-like simplicity. The layout encloses most of the shifting components beneath clear or translucent plastic. This consists of the printing material, which is held in plastic cartridges that fit into both sides of the printer. You by no means simply see the material itself.

    Cubify Cube 3 3D Printer Review and Driver Download

    maximum 3-D printers function a separate extruder (or multiple extruders) that melts the plastic into the print head, however 3-d structures builds part of this into the filament cartridge itself, on the give up of this clear plastic tube. it really works like a few ink-jet printers, in which the print head is built into the ink cartridge, so you get a new print head with every new cartridge and do not need to hassle with cleansing out the extruder. this may make a contribution to the higher fee of the print fabric, but.

    It does motive some troubles, though: i found that the mechanism that locks the metal cease of the tube didn't usually snap into vicinity. In flip, the print material didn't soften, and i got an unhelpful mistakes message. I resolved this fast by using removing and reinserting the steel cease, but it turned into honestly annoying. The cube 3 is unusual for a midrange printer in that it has two extruders: it is able to print either in  exceptional colors or in two extraordinary sorts of material immediately. I tested the printer using black and neon-inexperienced PLA fabric. Cubify Cube 3 3D Printer Review and Driver Download.

    The downside of the cube three is the price of the substances. 3-D systems fees $forty nine for every cartridge, every of which includes much less than a kilogram (much less than 2 kilos) of filament. (3-d systems does not specify exactly how a whole lot). other printers can use familiar filament, that is available for much less than $30 in step with kilogram (approximately $14 per pound).

    The print head movements left and right, while the print bed handles the up-down and forward-backward motion. This aggregate permits for a maximum print location of 6 x 6 x 6 inches, for a total of 216 cubic inches. it is at the small aspect; it is less than half of of the volume provided via printers just like the MakerBot Replicator 2 (456 cubic inches). however, it's miles big enough for maximum purposes; I had no troubles becoming our check initiatives into this print space.

    Cubify Cube 3 3D Printer Review and Driver Download

    The dice three is a simple printer to installation; i was jogging the first check print inside half an hour of commencing the box. an awful lot of the setup time turned into spent letting the printer run its personal calibration system, wherein it assessments the components and makes positive the print mattress is stage. most 3D printers require you to try this manually, however the cube three handles all this for you, the use of magnets underneath the print mattress to come across while it's miles close to the print head. 

    it really is a subject with this printer: It hides maximum of the technical components of 3D printing from the consumer. The print bed is unheated, so you ought to apply a thin coat of glue, that is blanketed, to make your venture stick with the bed at some stage in printing. The printer itself functions most effective a strength button and a 2.five-inch contact display. From the display screen, you could choose a model to print, hook up with a wireless network or change the print material. This touch display screen works fairly well, although it now and again calls for a sharp jab of the finger. Cubify Cube 3 3D Printer Review and Driver Download.

    most of the controls are inside the cloud: The cube three works with 3-d systems' cloud printing carrier, which does most of the work. You upload your print jobs to the cloud provider, which processes the record and sends commands to the printer. The Cubify software program is to be had for windows, Mac, iOS and Android gadgets, so that you can print from a pc, telephone or pill.

    The cube three made short paintings of most models I examined on it. it's far a little noisy, even though; it produced a chain of instead annoying high-pitched whines from the automobiles and a clank-clank-clank sound as the print bed moved up and down. although most prints had no troubles, some failed to stick to the glue on the print bed, so they become gooey messes. in addition, by default, the software is ready to print fashions without supports, because of this that objects with elements that are wider than their bases are not likely to print nicely. they'll fall over, or components may not persist with each other and turn out to be unfastened, sticking instead to the wrong components or to the print head. you can upload supports easily, as I did, however it's far ordinary that they're no longer included by default. Cubify Cube 3 3D Printer Review and Driver Download.

    The enclosed design of the printer makes it hard to look if there are issues. The top of the printer obscures the print bed so you can not virtually see what goes on till the print is partially completed. this is a substantial trouble if a print fails to stick; you often don't comprehend it for a while, and the printer keeps to waste luxurious fabric because it keeps working on a failed print.


    Compatibility/Operating System (OS)Cubify Cube 3 Support operating Systems :

    • Windows 
    • Mac OS 
    • Linux 
    How to Install driver for Cubify Cube 3 utilizing downloaded setup document:
    • Switch on your PC where you need to introduce Cubify Cube 3 Printerdriver. 
    • Until unless you proposed to associate USB link to the PC, kindly don't interface it. 
    • Download the setup record from above connection on the off chance that you didn't download them yet. Run the setup record as manager. It triggers to begin the establishment wizard. At that point take after the directions until to complete it. 
    • at the execution of this wizard you need to associate USB link between Cubify Cube 3 and your PC. 
    • So sit tight for that and associate just when it requests that you interface. It will distinguish the Cubify Cube 3 and proceed to next stride if all goes well. 
    • Input the qualities for every progression in the wizard and finish the introduce.  
    • Presently your printer is prepared to use as the product of Cubify Cube 3 Printer driver introduced effective.

    Cubify Cube 3 Driver Download

    Cubify Cube 3 Driver For Windows                       Download
    Cubify Cube 3 Driver For Linux                             Download
    Cubify Cube 3 Driver For Mac Driver                    Download

    Top 20 Free 3D Printing & 3D Printing Software

    Looking for 3D printing software? We've rounded up the top 20 software tools for beginners and professionals alike. Most slicers are free.

    What is a slicer? This is a program for preparing a digital model for printing. Models for 3D printing are usually distributed in STL files. To turn an STL file into G-code (a language that a 3D printer understands), a slicer program is required. It is called a slicer because it cuts (to slice - English) a 3D model into many flat two-dimensional layers, from which a 3D printer will add a physical object.

    Which slicer should I choose? In this article, we will tell you which slicer is best for 3D printing for each stage of your work. Which one is better for preparing a 3D model for printing? But what if you need to create a 3D model from scratch? And if you are only taking the first steps in 3D?

    Don't be afraid: we've answered all of these questions, including the required skill level for each program and where you can download it. The great thing is that most of these programs are completely free and open source.

    1. Cura
    2. CraftWare
    3. 123D Catch
    4. 3D Slash
    5. TinkerCAD
    6. 3DTin
    7. Sculptris
    8. ViewSTL
    9. Netfabb Basic
    10. Repetier
    11. FreeCAD
    12. SketchUp
    13. 3D Tool
    14. Meshfix
    15. Simplify3D
    16. Slic3r
    17. Blender
    18. MeshLab
    19. Meshmixer
    20. OctoPrint

    #1: Cura

    For beginners who need a slicer to prepare STL files for 3D printing

    Cura is the default slicer software for all Ultimaker 3D printers, but can be used with most others , including RepRap, Makerbot, Printrbot, Lulzbot and Witbox. The program is completely open source, its capabilities can be extended using plugins.

    This program is very easy to use and allows you to manage the most important 3D printing settings through a clear interface. Start in Basic mode to quickly get up to speed and change print quality settings. If finer control is required, switch to Expert mode.

    Cura can also be used to directly control the printer, but then the printer and computer must be connected to each other.

    Download: Cura

    Price: Free

    Systems: PC, Mac, Linux

    #2: CraftWare

    3D printers by the Hungarian startup CraftUnique to support their CraftBot crowdfunding machine. However, the program works with other printers.

    Like Cura, CraftWare allows you to switch from "Easy" to "Expert" mode, depending on how confident you feel. It's a colorful app that features a visual G-code visualization with each function represented by a different color. But the most outstanding feature is the individual support service. As far as we know, only the paid program Simplify3D has this.

    Please note, however, that this program is still in beta, so bugs may occur.

    Download: CraftWare

    Price: Free

    Systems: PC, Mac

    #3: 123D Catch

    -systems, smartphones and tablets, which allows you to convert images of objects into a 3D model. Pictures can be taken with a smartphone/tablet or digital camera.

    You need many photos of an object from different angles - the more the better - after which they will be compiled into a 3D model.

    123D Catch is more of a fun app than a professional 3D printing tool, but after some tambourine dancing, you can get good results, especially when paired with an STL editor like MeshLab or Meshmixer.

    Price: Free

    Systems: PC, Android, iOS, Windows Phone

    #4: 3D Slash

    and surprisingly simple, and refreshingly new. With 3D Slash, you can design 3D models using your dice skills.

    You can start with a large block and, like a virtual sculptor, remove small cups from it with tools such as a hammer or drill, or start from empty space and build a model from cubes and other shapes. You can paint with flowers or use template pictures.

    Other features worth mentioning are tools for creating logos and 3D text. The Logo Wizard imports an image and creates a 3D model, while the Text Wizard allows you to enter and format text, and then turn it into 3D.

    Recommended!

    Download: 3dslash.net

    Price: Free

    Systems: PC, Mac, Linux, Browser

    #5: TinkerCAD

    - A computer-aided design (CAD) system for 3D printing, which is a good starting point for beginners. Since its capabilities are limited compared to Blender, FreeCAD and SketchUp, many users switch to more powerful tools after some time.

    As in 3D Slash, here you can build models from basic shapes. At the same time, unlike 3D Slash, TinkerCAD allows you to create vector shapes in 2D and convert them into three-dimensional models.

    Come in: Autodesk TinkerCAD

    Price: Free

    Systems: Browser

    #6: 3DTin

    For beginners who want to create 3D printable models

    another easy and intuitive online tool choice for beginners in 3D modeling. All you need is a Chrome or Firefox browser with WebGL enabled.

    Choose from a huge library of 3D shapes and add them to your sketch. All sketches are stored in the cloud, access to them is free if you honor the Creative Commons license. Everything can be exported to STL or OBJ formats.

    Enter: 3DTin

    Price: Free

    Systems: Browser

    #7: Sculptris

    For beginners who want to create 3D printable models

    clay. This is a fantastic 3D modeling program if figurines are your main task. For example, you can make a bust of your favorite video game or comic book character. Sculptris is completely free and bills itself as a stepping stone to the more complex (and expensive) ZBrush tool.

    Download: Pixologic Sculptris

    Price: Free

    Systems: PC, Mac

    #8: ViewSTL

    For beginners who want to view STL files

    ViewSTL is the easiest way to view STL files . Simply open a web page and drag the STL onto the dotted box.

    The STL online viewer allows you to display the model in one of three views: flat shading (for a quick view), smooth shading (for a high-quality image), and wireframe.

    Enter: ViewSTL

    Price: Free

    Systems: Browser

    #9: Netfabb Basic

    some nice features that allow you to analyze, "repair" and edit STL files before moving on to the model cutting stage.

    A good choice if you need more than just a slicer and want to be able to quickly fix STL files without having to learn programs like MeshLab or Meshmixer.

    Don't let the 'Basic' in the title fool you, Netfabb Basic is actually a very powerful 3D printing tool. It's "basic" only in the sense that it doesn't cost €1,500 like Netfabb Professional!

    Download: netfabb. de

    Price: Free

    Systems: PC, Mac, Linux

    No. 10: Repetier

    For advanced to prepare STL files for 3D printing

    9002 the next level of 3D printer slicer software, but if you want to stay open source, you should look into Repetier. It is the great grandfather of 3D printing software and a favorite of the RepRap community.

    To date, the program is moving by leaps and bounds from the level for beginners to advanced users. Packaged in an all-in-one configuration, it supports up to 16 extruders, multi-slicing via plug-ins, and virtually every fusing 3D printer on the market. Get ready to tinker!

    What's more, Repetier Host works remotely via Repetier Server, so that the 3D printer can be controlled via a browser, tablet or smartphone.

    Download: Repetier

    Price: Free

    Systems: PC, Mac, Linux

    #11: FreeCAD

    The program is a great option for developing your design skills. More technically, this parametric 3D modeling program allows you to easily change the project by rolling back through the history of the model and editing the parameters.

    Download: freecadweb.org

    Price: Free

    Systems: PC, Mac, Linux

    #12: SketchUp

    For beginners who want to create 3D printable models

    SketchUp is the perfect combination of simplicity and the perfect combination functionality, with a user-friendly interface and a relatively flat learning curve (i.e., as experience grows with the time spent), the ideal program for developing three-dimensional models.

    The Make SketchUp version is free and will include everything you need for 3D modeling if you also download and install the free STL exporter. There is also a professional edition for architects, interior designers and engineers.

    Download: sketchup.com

    Price: Free (SketchUp Make), $695 (SketchUp Pro)

    Systems: PC, Mac, Linux

    #13: 3D-Tool Free Viewer

    view and validate STL files

    3D-Tool Free Viewer is a sophisticated tool that, among other things, allows you to check the structural integrity and printability of your file. With the Cross-Section function, for example, you can look at the model from the inside and check the wall thickness. Very useful if you want to check your STL file for killer errors before printing.

    Download: 3D-Tool

    Price: Free

    Systems: PC

    #14: Meshfix

    your model for errors.

    Price: Free

    Systems: Browser

    #15: Simplify3D

    For professionals to prepare STL files for 3D printing print. A flexible algorithm checks the model for problems, fixes them, shows a preview of the printing process (ideal for identifying potential problems), and then slices it.

    This slicer offers the best infill pattern options in the competition. For models that require supports, Simplify3D will create the appropriate structures on its own and give you full control over their placement. For printers with a dual extruder, when printing with different materials, the Dual Extrusion wizard will help, as a result of which, for example, it will be easier to remove the dissolving filament.

    Simplify3D supports 90% of today's commercially available desktop 3D printers and is compatible with Marlin, Sprinter, Repetier, XYZprinting, FlashForge, Sailfish and MakerBot firmware. Simplify3D can also be used to directly control the printer, but then the printer and computer must be connected to each other.

    Download: simplify3d.com

    Price: $149

    Systems: PC, Mac, Linux

    #16: Slic3r

    source code, which has a reputation as a carrier of super new functionality, which you will not find anywhere else. The current version of the program is able to show the model from multiple angles, so that the user gets a better preview experience.

    There's also an incredible 3D honeycomb infill, the first of its kind that can extend over multiple layers rather than repeating itself like a stamp. This significantly increases the strength of the internal filling of the model and the final printout.

    Another option is direct integration with Octoprint. Once the files on the user's desktop are sliced, they can be directly uploaded to Octoprint with one click.

    Download: Slic3r

    Price: Free

    Systems: PC, Mac, Linux

    #17: Blender

    For professionals who want to create 3D printable models

    Blender is a popular computer-aided design (CAD) system with a steep learning curve. Not at all the best choice for beginners, but what you need if you are quite experienced and need something more complex for modeling and printing.

    In short, Blender is one of the most powerful tools out there. Its community is always ready to help, there are a lot of educational materials. It's also open source, so enthusiasts often write extensions to make it even better and more powerful.

    Download: blender.org

    Price: Free

    Systems: PC, Mac, Linux

    #18: MeshLab

    For professionals to prepare STL files for 3D printing

    MeshLab - advanced editor. It allows you to remove parts of a 3D model, merge two models into one, patch holes. If you need a program to modify models for 3D printing or some kind of "repair" work, MeshLab is the right choice.

    Price: Free

    Systems: PC, Mac, Linux

    #19: Meshmixer

    For professionals to prepare STL files for 3D printing files. It's especially good for identifying potential problems and fixing them automatically. For example, it will show paper-thin walls that can lead to problems with 3D printing. Meshmixer is part of the Autodesk family of 3D printer software, so it should work well with tools like TinkerCAD.

    Price: Free

    Systems: PC, Mac

    #20: OctoPrint

    start, pause or interrupt 3D print jobs. Combined with Wi-Fi capable devices, it makes for a great monitor for remotely monitoring the 3D printing process.

    Octoprint understands the G-codes of almost all 3D printers and slicers and includes a gCodeVisualizer to visualize this code before or during printing.

    If you want to work away from your 3D printer and control it remotely, Octoprint is the best you can find.

    Download: octoprint.org

    Price: Free

    Systems: PC, Mac, Linux

    Source

    Oops.

    Apparently, you've landed on a page that either doesn't exist or was deleted long ago. Start your search first!

    Request a call back

    Telephone

    By clicking on the button, you agree to the privacy policy of

    Item added to cart

    Go to cart

    Product added to comparison

    Compare products

    Cannot compare more than 4 products

    Request CP

    Organization name:

    Your e-mail

    Your phone

    Name of contact person:

    Legal address:

    Comment:

    By clicking on the button, you agree to the privacy policy of

    Goods on the way, find out when delivery

    Your name:

    Your e-mail

    Your phone

    By clicking on the button, you agree to the privacy policy of

    Contact us

    How to call

    By phone +7(495)155-45-19. Your call will be answered by an answering machine. We won't call back if you don't speak up. Each request is processed, we contact clients in accordance with requests. Prepare the information you want to report, send it to the answering machine and we will call you back. We kindly request: do not be silent and do not hang up, this is just an answering machine. 🙂 Other most effective ways to get in touch: