(506) 2240-6804
Alligator board 3d printer
Alligator Board - Professional 3D Printer Control Board Launches on Indiegogo - 3DPrint.com
In the last two to three years we have seen an explosion within the RepRap community with all sorts of new designs for 3D printable 3D printers. As the number of potential machines grow, nearly exponentially, so does the need for components for those printers.
When I first found out about the RepRap movement, I had barely even understood how typical FFF-based 3D printers had worked. All I knew was that the thought of 3D printing a 3D printer intrigued me to no end. As I read more and more about RepRap I began tinkering around in my garage, eventually constructing my own 3D printer out of parts I printed on an old MakerBot. The printer worked, but not all that well. I used cheap components and a cheap control board which made things clunky and probably not worth the effort it took to construct the printer.
Here we are several years later and RepRappers now have so many awesome design options to choose from in addition to components and control boards which would have made me drool when I constructed my first 3D printer. To bring even more optimism to the RepRap crowd, Perugia, Italy-based company 3DArtists.org has just launched an Indiegogo crowdfunding campaign for what they claim to be ‘the new generation electronic for RepRap 3D printers’, the Alligator Board.
The Alligator board is perfect for standard Cartesian-based 3D printers, but will suit the more data-intensive Delta-style 3D printers as well. The company has been working on these boards for approximately a year before finally unveiling them at Maker Faire Rome 2014. The Alligator board has the following features:
- CPU Cortex M3 Atmel ATSAM3X8EA-AU, Arduino-Due-Compatible
- High Current connector for power input, bed and hot-end heaters
- Power Input 12-24Vdc
- 4x Stepper Motor driver running at 1/16 or 1/32 microstep and based on Texas Instrument DRV8825
- 6x End-Stop input compatible with both mechanical and optical/magnetic solution
- 2x Precision analog input for temperature measurement with RTD
- 2x External FAN output with PWM speed control
- 3x Generic PWM open drain output
- High current Hot-End Heater driver output
- High current Bed Heater driver output
- 32MB External Flash memory, and 64Kbit EEPROM
- Micro USB connector
- Native USB port
- A microSD Slot
- 10/100 Ethernet Port
- 26 pin Raspberry-PI Compatible expansion connector
Now the company just needs one thing to begin mass production of these boards, and that is cash! This week they’ve launched their Indiegogo campaign to raise €10,000 by April 7th by pre-selling the Alligator boards along with several expansion pack options.
The expansion options include the Piggy Module Lite, which allows for one additional extruder, and the Piggy Module Plus which will allow for the addition of up to three more extruders. There is also a Thermocouple Module being made available, as well as an entire package which includes the Thermocouple and Piggy Module Plus expansions, along with the base Alligator Board
Piggy Expansion
For those interested in pre-ordering any of the packages listed above, while also helping 3DArtists reach their Indiegogo goal, the Thermocouple Module is priced at €20, the Alligator Board starts at €160, Piggy Lite Expansion €40, Piggy Plus €90, and the complete bundle starts at just €250. The first units of the Alligator board should begin shipping in April with the Piggy Modules and Thermocouple Module shipping sometime in June.
Let us know if you have pre-ordered any of these boards, as well as your thoughts on the specifications of each. Discuss in the Alligator Board forum thread on 3DPB.
com. Check out 3DArtists’ Indiegogo pitch video below:
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
Tagged with: 3d printer boards • 3d printer components • Alligator Board • crowdfunding • piggy module • reprap indiegogo • thermocouple
Please enable JavaScript to view the comments powered by Disqus.
▷ alligator board 2c the new generation electronic for 3d printing 【 STLFinder 】
#HighFive board for the 3D Printing Nerd
thingiverse
Made for Joel Telling.
New controller board for the 3Drag.
thingiverse
http://www.open-electronics.org/a-new-board-for-the-3drag-theres-more-than-sanguinololu/ http://www.reprap.org/wiki/3Drag_controller Instructions More info on http://www.open-electronics.org/ blog http://www.open-electronics.org/?s=3drag...
The Gallerist Organizer remixed for new printing
thingiverse
Shrunk all the walls from fabmaszter's design to fit in the new printing. ...The only thing that I couldn't get were the money trays, even after doing it from scratch. Please let me know if someone creates a money tray that works for the new printing!
cookie cutter for the claas 2c
thingiverse
ist a Cookie cutter for my Boys Christmas Cookies class 2 C
Electronic Components for circuit board 3D model
cgtrader
.
.. || No plug-ins needed. || ADDITIONAL NOTES || Other file formats . May be needed to reassign materials and will not render like the preview images. FBX If have any question , please contact me , i will solve the problem as soon as possible
Housing for electronic board
grabcad
Housing for electronic board
Christmas tree and squeezes for the dough. 3 New Year ideas for 3D printing
thingiverse
... family warmth and great success in business and business. "Let the nozzle not clog, the part not peel off and the filament never end! .
....." MY WALLETS FOR DONATS: DONATIONALERTS: https://www.donationalerts.com/r/3dmpl WebMoney: Z147898355795
Hare New Year for 3d printing
sketchfab
Hare New Year for 3d printing
NEW COFFEE PHONE HOLDER FOR 3D PRINTING
cults3d
New Coffee phone holder for 3D Printing. This object is ready for 3D printing. Doesn't need support! As you can see in the image - the phone holder has been printed and checked! Format - STL. ... My instagram @its_3dprint_time
hole size test board for 3D printing
thingiverse
Printing: Ring - Infil to add weight, supports needed for spade inset.
Letter embossing doesn't need it.
Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight.
...
Alligator Board Support for 2020 profile
thingiverse
A simply adapter for the board 3Dartists "Alligator", that allows to fix it to the 2020 profile. ... The side holes are used to secure cables to the support with ties.
Wall mount for the new Innogy Smarthome Central Unit (2nd Generation)
thingiverse
The new Innogy Smarthome Central Unit (2nd Generation) is not intended for wall mounting, so I have created a simple wall mount.
The wall mount can be fixed with two small M2.5 screws on the Central Unit. The wall mount can be screwed on the bottom...
The fun 3D printing torture test (New 2021)
thingiverse
Project made by us from Koala Print 3D, to test prints and models It is designed to 3D-print quickly and be a fun tool for calibrating your 3D printer. ... siga-nos nas redes sociais / follow us on social media TikTok: ...
Electronic Circuit Board 3d model
cgstudio
Description A case for an electronic circuit board mounted with electronic components having a case main body whose one end is opened, an opening formed at an outer periphery of the open end of the case main body; and retaining means such as rails,.
..
The New MacBook 2015 for Element 3D
3docean
This package contains After Effects project file with High Poly model of the new MacBook 2015 using Videocopilot Element 3D plugin. Project contains 6 compositions: 3 comps with different colors of the New MacBook (Silver, Gold and SpaceGray) and 3...
Ear bugs for iPhones new generation
grabcad
it has Lighting connector for audio signal
Electronic Dart Board 3D model
cgtrader
47 Formats: obj simple object without textures and materials (with mapping included) 3ds simple object without textures and materials (with mapping included) fbx simple object without textures and materials (with mapping included) dxf simple object.
..
Electronic Dart Board 3D model
cgtrader
81 Formats: max c4d obj simple object without textures and materials (with mapping included) 3ds simple object without textures and materials fbx simple object without materials (with mapping and textures included) Mental Ray *.max with textures and...
xyz printing kiss new bracket for moving the sensor to the front of the bed
thingiverse
kiss all you military know this term "KEEP IT SIMPLE STUPID" if you do not use your whole bed you will not even notice this till parts start to overheat and not adhere to the middle of the bed not so bad with ABS and you can go a long time before it.
..
NUCLEO (STM32Fxxx/STM32Lxxx Development Board) Case for 3d Printing
grabcad
Case for STM32Fxxx/STM32Lxxx Development Board
NUPRO SLIMFIT COVER FOR NEW KINDLE 8TH GENERATION BLACK 3D model
cgtrader
NUPRO_SLIMFIT_COVER_FOR_NEW_KINDLE_8TH_GENERATION_BLACK Poly Count 1266 Verts Count 1616 Texture Size 4096 x 4096 Material - Yes UV Unwraped- Mixed Rigged- No Animation- No File Format- OBJ & FBX & STL
New Generation Jeep Free 3D model
cgtrader
.
.. is based on 4*4 concept. ...The width of the car is kept slightly more than a usuall car for smooth turns and higher stability on high speeds on curves. ...Also their are enough vents for air intake in case of harsh driving in extream hot conditions
Vertical Mount for Electronic Circuit Prototyping Board
thingiverse
The proto-board will then latch into bumps at the base of the bracket, to provide stability, without the need for screws/bolts through the proto-board. The mounting holes in the proto-board provide the interlock for the latch. The latches in the...
Electronic board cover for A8 Printer
thingiverse
However, I don't want to disassemble all wiring and the board in order to install the cover, so I designed it so that the cover can slide in from the top all the way down just by unscrewing top screws & nuts.
I also found that the rear bottom part of...
Printboard - A prototyping board for electronic circuits
prusaprinters
This model can be used as an inexpensive and configurable breadboard alternative, with the advantage that the components can be soldered in-place. Print instructionsImportant Notes You need a 0.25 mm nozzle to print this The electronic connections...
Heart electronic board - ready for 22 Valentine :-)
prusaprinters
This is our second wall art work: going near the electronic brainSo that you can have electronic heart + brain :-)Print at 80% speed the first layers
New Fan for Printing PLA
thingiverse
I always like to try and error and make, this is currently the new fan that my little creation mind tell me to.
all my drawing is done in meshmixer and i didn't use any special software so bear with me. I only create what i need. this design is base...
The Sharpshooter - Model Rocket for 3D Printing
grabcad
...There is a wide variety of formats I can export it to. I have also included an image for those who are new to model rocketry and want to give it a go. ... Let me know how well it flies, what engine you used and any problems you may have encountered.
Geralt The Witcher bust for 3D printing
sketchfab
Here is Geralt of Rivia, The Witcher played by Henri Cavill bust 3D model ready for 3D printing.
The model current size is 5 cm height, but you are free to scale it. Zip file contains stl. The model was created in ZBrush. If you have any questions...
Mono Eye The new generation of MT workers
pinshape
He is the first generation of mono eye hard workers in MT society.(And I hope have enough time to spread this new generation so I appreciate it if you tell me your ideas the more mono eye workers are coming up for a better MT society)
All About 3D Printing - Free Hardware
Advanced Powders & Coatings or AP&C has just announced the establishment and opening of a new plant for the production of metal powders for 3D printing.
This unusual 3D printed sheet was designed to dramatically improve satellite coverage.
The LimitLess ILC is a 3D printer designed and manufactured in Galicia, Spain, which is sold fully assembled and calibrated.
The French company Pollen AM surprises us with the presentation of a new FFF-type 3D printer capable of working with two different materials.
The US Navy says it has solved a problem on one of its aircraft carriers thanks to 3D printing.
Thales Alenia Space and Poly-Shape were the companies responsible for producing the largest printed metal to be sent into space.
After a long wait, the project to create a universal camera called Mercury is finally a reality.
OESH has just announced that its engineers are working on the design and development of a 3D shoe printer.
Leon3D has entered into an agreement with Laboral's Kutxa division to be responsible for funding the purchase of their 3D printer for any customer.
Grupo Unceta will join forces with Tumaker to offer 3D printing services to all its customers in Spain, Portugal and Cuba.
Prodintec, Corposa and Grupo Masaveu will collaborate to develop a technology for the production of concrete buildings using 3D printing.
Barcelona-based startup Natural Robotics announces that they are finalizing parts for the launch of a new SLS-type 3D printer.
The Seville project, which made it possible to develop printed hearts, received 3 important national awards.
Plastics Technology Center, Andaltec, has just announced the acquisition of a new 3D scanner capable of digitizing objects of any size.
Curious puzzle box hit the internet with its new features and combination of 3D printing with Arduino board, all fully released...
MarkForged Onyx is a new material created by MarkForged, featuring a nylon base and reinforced with carbon fiber particles.
Taking advantage of Additive Manufacturing Europe 2016 being held these days, Zortrax introduces the new 3D Zortrax M300.
TheXYZprinting da Vinci miniMaker is XYZprinting's new big bet in the world of education and training.
The house was built entirely using 3D printing in just 45 days.
A record of time, as well as construction equipment in the form in which it was printed.
Ninjatek announces the immediate availability of two new exclusive filaments for use in FFF type 3D printers.
A team of scientists at the University of Pennsylvania have succeeded in creating a biotin filament capable of creating a 3D printed katilga.
It's rare to see twelve year olds building a business, but it's even rarer that their business center uses 3D printing. Rowan Pritchard is an entrepreneur.
Boulanger, a French chain of home appliance manufacturers, has just announced the creation of a warehouse so that everyone can produce their own spare parts.
The merchandising field has a great future with 3D printing. Currently, there are many small and medium-sized enterprises that cannot spend large sums on merchandising.
The Disney Research Center has just surprised us with the creation of a new technology that can create flexible objects using 3D printing.
Be More 3D is a Valencian company responsible for the creation and design of the first 3D concrete printer made in Spain.
Aesthetically enhance your Raspberry Pi card with this peculiar aluminum case, created and designed by the guys at Kodi.
At the Eurecat Technology Center they announce the development of a new technology for the production of carbon fiber reinforced parts.
IN (3D) USTRY From Needs to Solutions and Leitat Institute of Technology announce an accelerator for 3D printing projects.
The Archaeological Museum of Madrid is implementing a project that will allow the study of mummies thanks to 3D printing ...
XYZprinting da Vinci Jr. 1.0 is a new compact model recently introduced by XYZprinting that can be yours for 659 euros.
Barilla reveals that his 3D food printer can now print the equivalent of a plate of pasta every five minutes.
3D printing saved the life of a small American baby who was born with a brain outside of his own skull.
After years of development, NASA is finally giving us the first details of its new 3D food printer.
Kudo 3D has just announced the official launch of their new SLA-DLP 3D printer called Titan 2.
Local Motors, in collaboration with IBM and Intel, is showing us an interesting 3D printed autonomous bus concept.
Qatar is gearing up to host the 2022 FIFA World Cup and has turned to the help that 3D printing can offer.
Adrian McCormack, a young Australian in his third year, proudly shows us his self-designed printed guitars.
Nexeo Solutions 3D is a new online store specializing in 3D printers where you can purchase DSM filaments such as Novamid and Arnitel.
Israel-based Utilight has just unveiled the first 3D printed solar panels.
Thai company O'Qualia is finally the first to release the first commercial 3D printed drone.
Eiro is a cute 3D printed humanoid-like robot that comes on the market as a very interesting training kit.
Urban architecture studio WATG shows us their concept of a 3D printed house of the future.
After the presentation, the Spanish importer of the Chinese firm has just announced that the new Colido X3045 is finally coming to Spain.
Janjaap Ruijsenaars is the architect who surprised us with the creation of an endless building using 3D printing technology.
Titan 2 is the name of the new Kudo3D 3D printer, a printer that uses Raspberry Pi for its work and SLA technology ...
Stratasys has just released a press release highlighting the improvements it has made to its FDM printers.
Dynamical Tools is an Aragonese company that has made a name for itself on a European level with machines like the DT600.
Siemens has started to innovate in the world of 3D printing by creating a kind of printer out of spider robots.
Dubai is showing us its 3D printed building for the first time as it aims to become the 2030D printing capital in 3D.
101 Hero is a new, very simple 3D printer that can be yours if you help fund it through Kickstarter.
Under the name HP Jet Fusion 3D, the American company presents its first offering related to the world of 3D printing.
Those in charge of AutoCAD have just announced that the 2017 version of the renowned software will finally include full 3D printing support.
PiGGRL Zero is the name of a project where you can create your own handheld console using a Raspberry Pi as a base.
Pasta specialist Barilla has just launched a new 3D printer capable of creating pasta of any shape.
A small guide to the 5 most important boards to use in our projects to have wireless internet for little money...
A team of engineers from the University of Bristol has just shown the public how to use ultrasound to make composite objects.
XYZprinting has just announced the sale of their new da Vinci Pro printer, a 3-in-1 professional printer that all professionals are sure to love.
The Mexican company Viwa has just officially announced that they already have a machine capable of 3D printing on metal and offer CNC services.
Pockulus VR is a completely free virtual reality glasses made with CHIP board and 3D printing, but its features are not as expected...
A short post about 5 websites where you can get 3D printing files for free and are available to all interested people
Chitu 5.1 is a low cost 3D printer electronic whiteboard with many features such as Wi-Fi printing...
Peter Smakman from Delft University of Technology shows us his Curatio project, in which he created an inexpensive 3D scanner that is very easy to recreate.
Through the cooperation of the two Valencian institutes AIMME and AIDIMIA, research will start on the production of printed home furniture.
Thanks to this project, you can create your own RC SUV and print it on your 3D printer. A toy that you can control with your smartphone
Voltera V-One is a new startup that has just unveiled a complete 3D printer capable of making printed circuit boards on PCBs easily and simply.
If you have a 3D printing company, you will definitely like the Glowforge, a very interesting laser cutting machine to complete your offer.
A student at the University of Oslo has unveiled a 3-Axis 5D Printer, a 3D printer that is based on RepRap but adds two more axes.
A University of Maryland student has created a mobile tripod that will allow you to shoot in landscape mode with your mobile phone thanks to 3D printing.
Centrolandia is an Alicante-based company created exclusively for the production of designer furniture printed using 3D printing technology.
User RegisHsu has posted plans and information for a spider robot, a robot whose parts have been printed and uses an Arduino Pro Mini board.
Zhuai CTC surprises the market with the first 3-in-1 3D printer, cutter and router on the market, a product they hope to sell for $1,000 each.
ToyRep 3D is the name of a 3D printer with free hardware that was able to be built for less than 100 euros, a milestone in the market.
Cosine Additive surprises with the launch of a new large format 3D printer ideal for composite materials.
According to the latest statement published by i.materialise, Blender is the 3D modeling program most commonly used by companies internationally today.
Many of us have already been surprised, but it finally seems that 3D printing has started to appear in Formula 1.
Avrid Larsson created an instant thermal camera with a Raspberry Pi A+, similar to the old Polaroid cameras that printed photos instantly.
From Brazil we get information about how a team of graphic designers managed to recreate the face of St. Mary Magdalene.
STL files have been greatly improved by I+D Technologies, which allows you to print your own topographic levels in 3D.
Ben Heck shows us very simply how he managed to make his own graphing calculator from a Raspberry Pi.
Gilbert300 is a spider robot that was built using free hardware and printed parts.
The robot works great on almost any floor.
Adafruit user printed out the Nexus 5 Google Cardboard and showed it off, completely freeing up the design so we can make it.
An article in which we will show you how to print your own weapons is fully functional, although not recommended.
Spanish Doctors Develop a Treatment for Clubfoot Using 3D Printed Splints
Punch! This is a fun accessory for our 3D printer that will allow us to quickly and have fun removing parts without using a spatula.
3D printing is already useful in some sectors such as agriculture where many tools can be economically created using 3D printing.
PiBoy is a personal project with the Raspberry Pi that tries to recreate the old Nintendo Game Boy game console, the game console that marked an era in his world.
A little tutorial on how to turn your Raspberry Pi B+ into a full-fledged gaming console to watch TV in your living room
An article in which we know a 3D printed beehive that allows us to collect honey without fear of a bee sting.
An article in which we know which city in the world is the first in the world to be 3D printed and which is located in Spain.
Meikian Live is a developer community based Gnu/Linux distribution that has everything you need to create and manage objects with our 3D printer.
3D printing continues to find more and more applications, and this time we know how the next item to be printed will be your glasses.
Filastruder is a machine that creates plastic filament for our printer, and printing with this type of material is more economical.
Printder is a company that promises to revolutionize the world of printing with paper and inks that allow a 2D printer to print 3D objects.
James Bruton, passionate about robotics and free hardware, is developing a genuine R2D2, this version will be 3D printed.
An article in which we can see a curious 3D printer created from parts of the popular LEGO game and using a hot glue gun.
An article in which we know that dentures can also be 3D printed.
3D Printed and FreshFiber have announced Apple Watch bands that will be interchangeable and printable so we can be fashionable for very little money.
TheAlligator Board is a 3D printer board that takes all the advantages of its competitors and extends it by providing new features to printers.
Subtractive manufacturing is much more precise than 3D printing and in this article we will show you why and its main characteristics.
A hobbyist 3D printer user managed to build a 3D printer out of Lego blocks and parts that also uses a glue gun.
A fan of old video games has introduced PS4 modifications that will allow us to use old cartridges in the new console.
An article where we know about 3DRacers, cars that can be 3D printed and driven with a smartphone.
A mechanical engineer managed to print a Toyota engine on a Prusa, this engine is made of plastic and represents a big savings in engine rebuilds.
Bq has recently released all the documentation for the ZUM SCAN board, making it easy to create and customize your own Ciclop scanner.
A keychain has been created printed on a tritium vial that allows a lamp to be produced that will shine for 20 years without any battery or cell.
LibreCalc is a free calculator of French origin that aims to create a scientific, free and cheap calculator that anyone can modify.
An article in which we know Voxel8, a dual-head 3D printer capable of printing electronic circuits and offering us new possibilities.
Organovo is a company that is already creating living organs through 3D printing and cell culture. An innovation acting only as a therapeutic pathway.
Diwo is the name given to the latest project by Bq Readers, a Spanish company that distributes free equipment to Hispanics.
TheTheta is a free printer that, in addition to using four extruders, changes Cartesian coordinates to polar ones, which speeds up printing.
STL FILE 22X7.5X5.5CM STORAGE CONTAINER FOR IKEA SKI・3D Print Design for Download3D・Cults
Spool holder for IKEA Skadis
0,60 €
STORAGE BOX 14X7.
5X10 CM FOR IKEA SKI 0,99 €
Shelf 10*2.5 cm for IKEA Skadis clothespin - Printing board
0.50 €
Shelf 14*2.5 cm for clothespin IKEA Skadis - Printing board
0.50 €
STORAGE BOX 6X5,5X10 CM FOR IKEA SKI
0,99 €
STORAGE BOX 14X7.5X5.5 CM FOR IKEA SKI
0.99 €
18X7.5X2 CM STORAGE BOX FOR IKEA 9 SKI0228
€0.99
STORAGE BOX 22X7.5X2 CM FOR IKEA SKI
0,99 €
The best files for 3D printers in the Tools category
LABELS VEGETABLE GARDEN SOWING
Free
Delonghi Satrap coffee machine steam valve knob/arm
Free
10" Raspberry Pi Desktop
Free
Windscreen ice scraper
Free
Imprimante 3D Prusa i3 Steel de 3D PNX
Free
Covid 19 Adjustable protective visor
Free
CORONA MASK VERSION OF 03/28/2020
Free
Star Trek: The Next Generation inspired Enhancement module
Free
Bestsellers in the Tools category
Bit holder Spartan 4 mm Hex
1,80 €
ENDER 3 S1/PRO SPRITE, V3 AIR DUCT 5015 OR 4020
2.
49 €
Cut-Man - PET bottle cutter with handle!
€3.49
Phone holder
2.49 €
GEAR AND DRIVE
€9.61 -40% 5.76 €
Display holder FLSUN v400
4.99 €
PRECISE DIAL INDICATOR 3D PRINT DIY
1,90 €
Printer boxes for Ikea Lack Table
1,99 €
PET-Machine, make your own plastic bottle filament at home!
50 € -70% 15€
Business card embossing system
3 €
PRECISION CALIPER 3D PRINT DIY
3.
11 €
Cooling system Minimus Hotend
€2.38 -thirty% 1.67 €
Rapid print paint bottle rack (6 sizes)
2.91 €
Tool holder for 3D printer V3.0
1.06 €
Ender 3, 3 V2, 3 pro, 3 max, dual 40mm axial fan hot end duct / fang. CR-10, Micro Swiss direct drive and bowden compatible. No support required for printing
1.62 €
ENDER 3 S1/PRO SPRITE, HOTEND 4020 OR 5015 FAN PROBE NO Y OFFSET
1.96 €
Do you want to support Cults?
Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so supporting us in maintaining activities and creating future developments is very easy.
