(506) 2240-6804
3D printing paintings
Results for "3d Printing" Paintings
Untitled (Pentagonal II)
Paintings, 18.5 W x 24.5 H x 2 D in
$2,810
Modular (Water)
Paintings, 12 W x 12 H x 2.5 D in
$1,300
Typescape
Paintings, 24.5 W x 36 H x 2 D in
$5,850
3D Blossom III - Its About Time (2018)
Paintings, 31.9 W x 23.6 H x 2.4 D in
$2,610
Original butterfly Painting on Glass: Candy
Paintings, 29.1 W x 29.1 H x 2 D in
$5,050
CONCRETE SURFACE
Paintings, 35.4 W x 35.4 H x 2.8 D in
$1,200
Poem
Paintings, 47.2 W x 59.4 H x 3.9 D in
$4,450
Prints from $40
Original Painting - Clockwork Bird GOLD mixed media
Paintings, 22. 4 W x 28 H x 1.6 D in
$4,300
Mono Art. Bas - relief painting.Diptych
Paintings, 15.7 W x 19.7 H x 0.8 D in
$1,260
Prints from $40
3D Textured Painting Large Flowers Teal Abstract Painting Coral White Green Red Floral Landscape. Tropical Botanical Garden Painting on Canvas. Modern Impressionism
Paintings, 48 W x 24 H x 1.5 D in
$1,320
Prints from $63
The Ways of the Heart
Paintings, 78.7 W x 78.7 H x 0.8 D in
$12,990
Prints from $90
My Skin is Made of Glass
Paintings, 19.7 W x 19.7 H x 1.6 D in
$3,275
Prints from $45
Untitled
Paintings, 20 W x 24 H x 0.3 D in
$2,370
Oracle Flower
Paintings, 42 W x 39 H x 4 D in
$2,710
Prints from $40
the brinks of infinity
Paintings, 13.
3 W x 16.5 H x 0.7 D in
$320
Prints from $40
Swinging
Paintings, 16 W x 20 H x 1.5 D in
$1,400
Clockwork Bird: FLY
Paintings, 29.5 W x 22.4 H x 2 D in
$3,800
Blossom
Paintings, 5 W x 7 H x 0.2 D in
Filters
Paintings, 24 W x 18 H x 1.5 D in
$615
Prints from $40
Feast on the Digital Meat
Paintings, 18 W x 15 H x 2.5 D in
$415
Prints from $40
Irresistible
Paintings, 15.7 W x 27.6 H x 2.4 D in
$1,060
Dead Palette
Paintings, 18 W x 24 H x 1.5 D in
$2,670
Aperiodic Cascade
Paintings, 24 W x 36 H x 2.
5 D in
$4,210
Voronoi I
Paintings, 18 W x 24 H x 1.5 D in
$2,810
Entropy Sonnet (The New Colossus)
Paintings, 24 W x 24 H x 3 D in
$4,950
angle-left
12345
angle-right1 - 25 of 308 paintings
25 Results Per Page
25 Results Per Page50 Results Per Page100 Results Per Page
25 Results Per Page50 Results Per Page100 Results Per Page
HomePaintings3d-printing
Top 10 Applications of 3D Printing in Art
Published on October 7, 2021 by Jamie D.
3D printing gives a completely new meaning to the saying “art knows no boundaries,” proving that new technologies and creativity are in fact very compatible, contrary to popular belief. Because the use of additive manufacturing allows artists to go one step further in their creative process.
Keyword design freedom: working with additive manufacturing processes enables the realization of highly complex geometries with a high level of detail. Advantages that can be used to create replicas for museums, for example. But the application of 3D printing in the art sector is by no means limited to this purpose. More and more, the focus is on the additively manufactured object itself. The technology is increasingly being adapted by artists as a tool with which the realization of an idea knows hardly any limitations – except gravity. In our selection, we would like to present some current examples that we feel illustrate the importance of 3D printing for art.
Hypnerotomachia Naturae
The sculpture “hypnerotomachia naturae”, which was realized by Stefan Maier and Giacomo Pala under the supervision of Bart Lootsma at the Institute for Architectural Theory at the University of Innsbruck, is at first glance reminiscent of a construction kit. And deliberately so: because the modular construction is meant to remind us of the connection and contradictions of man’s relationship with nature and technology.
Hypnerotomachia was realized in concrete in collaboration with concr3de and exhibited last year as part of the exhibition ‘beauty before wisdom. the knowledge of art and the art of science’ at the Tiroler Landesmuseum in Innsbruck. On display is a multitude of individual parts that are connected with each other to form a large whole. The individual objects are intended to remind the viewer thematically of the diversity of utopias, myths and cultures.
Mat Collishaw’s Equinox at the Dubai Expo 2020
For the World Expo 2020 in Dubai, which due to the pandemic actually just started recently on October 1st, 2021, the artist Mat Collishaw has come up with something special with the work “Equinox”. In an optical illusion, a gigantic lotus flower in the center of the Terra Pavilion truly comes to life. The blossoms spin, insects circle and flutter around the flower, pollinating it. For this ecological dance to succeed, the five-meter high and three-meter wide zoetrope opens and closes with the help of hydraulics.
opened and closed. The petals were all 3D printed. It is not known which process the artist used for the realization, but we do know that Collishaw has in the past created a zoetrope for the Galleria Borghese in Rome in collaboration with the Spanish company Sicnova 3D.
A 3D printed replica of Michelangelo’s David
Created specially for the World Expo 2020 in Dubai, the Italian pavilion has produced a replica of Michelangelo’s David using 3D technology. The engineering department of the University of Florence and the Swedish hexagonal industrial group are behind the project. The 3D printed statue, which represents the biblical hero David as he approaches his battle with the giant Goliath, is the same size as the original, over 5 meters high. And in order to fully digitize the work, thousands of scans were required. As for the printing, the organizers of the project decided to divide the work into 14 printable pieces. They were printed from acrylic resin, and then assembled by art restorers using glue and marble dust.
The Silent Orchestra
Developed by Peter Lang and acoustics experts from the University of Applied Sciences in Rosenheim, Silent Orchestra is a 3D printed sculpture. Inspired by the nests of wasps and hornets, the work acts as an acoustic absorber. Composed of tubes of different sizes, Silent Orchestra was 3D printed using the FDM process. To do this, Peter Lang first hand-drew the outline of the object in each layer on 3 x 6 meter sheets of fleece before scanning them. Then, in collaboration with Additive Tectonics, the sound absorber was 3D printed from Tecnaro’s Arboblend biopolymer, which is 100% bio-based. A unique and sustainable work of art, capable of absorbing sound, that combines the best of craftsmanship and new technologies.
Claude Monet’s Famous Water Lillies, But 3D Printed
Joseph Coddington, a student at Victoria University of Wellington, has carried out an interesting project that combines 3D printing technologies with works of art.
Specifically, he has analyzed how voxel additive manufacturing can be used to replicate a panel from artist Claude Monet’s “Water Lilies” collection, a series of paintings created between 1914-26. To do this, Coddington replicated the painting digitally and then used the Stratasys J750 3D printer to produce the prints. This method allowed him to define a color for each individual dot, called voxels, throughout the volume of a final model. He further states that his goal was to showcase the new applications and artistic qualities that voxel 3D printing can offer in art.
The Yinyun art installation
The so-called Yinyun is an art installation composed of 85 3D printed ceramic pieces. It is located in the Taipower D/S ONE showroom in Taipei, Taiwan. In order to successfully develop the project, those responsible used a generative design algorithm to extract the electrical data and visualize it on each unit, creating a gradient effect. Later, additive manufacturing technologies came into play to create each of the parts using ceramics, specifically based on a mixture of recycled material.
At the same time, they managed to create an original detailed surface relief thanks to this technique. The main feature of the Yinyun installation is that the complex shapes of the pieces mean that none of the units is the same as any other.
Sebastian Errazuriz and his 3D printed sculptures
New York-based designer Sebastian Errazuriz has developed a collection of statues for New York’s Elizabeth Collective gallery in May 2019. While the project is not brand new, the characters represented are familiar to all. The artist has taken some major personalities like Steve Jobs, Trump, Elon Musk and Jeff Bezos and turned them into 3D printed statues reminiscent of Roman mythology. The collection has been named “The Beginning of the End” and seeks to show all the technological changes that will change humanity. It uses technology as a way to denounce the impact of technology. Thus, we can see the bust of the founder of Facebook, called “The New Opium”, with this idea that we have become addicted to the social network.
The team first retrieved hundreds of images of these personalities to reconstruct them in 3D, a time-consuming task that took several months. We don’t know what printing technology was used but the details are there! The video below goes over the whole project:
Mellifera, the 3D printed beehives
For the London Design Festival held last September, French architect Arthur Mamou-Mani imagined Mellifera: The Dancing Bee Hives, a set of 3D printed structures reminiscent of beehives. 3D printed from PLA, they were installed in the center of the spiral staircase of the famous Fortnum & Mason store in Piccadilly. The aim of the architect is to remind the importance of bees in our society and the need to rehabilitate our urban spaces to allow them to survive. He chose 3D printing and more specifically PLA for its lower environmental impact.
Arthur Mamou-Mani stated in an interview that PLA has a carbon footprint up to 80% lower than its petroleum equivalents.
MAD Architects 3D-Printed Furniture at Milan Design Week
During Milan Design Week, MAD Architects, headquartered in Beijing, debuted their 3D-printed furniture design project. For the project, the studio reinterpreted Christian Dior’s iconic piece of furniture, the Medallion Chair. Using 3D printing technology the design studio was able to depict the set of chairs being in motion. According to the designers, the 3D-printed polyurethane chairs, entitled “Meteor”, serve as a reflection on time and space.
Angela Merkel Equestrian Statue
Though unconfirmed whether the former German head of state was an equestrian during her lifetime, a Bavarian artist took creative license, depicting Angela Merkel riding horseback in a 3D-printed concrete statue. The life-size statue, sitting 2.70 meters high, is to commemorate the years of service from the first female chancellor of Germany.
The artist, Wilhelm Koch, 3D-printed the statue using recycled concrete, which can be interpreted as a nod to Merkel’s political work towards climate change policy.
‘RGB Scone, Hold Your Nose’ by Alan Phelan
‘Hold Your Nose’ by Alan Phelan is a 3D printed, 5.5-meter-high sculpture made out of eco-plastic and paper that is on display in Dublin, Ireland as part of an initiative from the Dublin City Council to commission six public sculptures for parks and public spaces throughout the city. ‘RGB Scone, Hold Your Nose’ was the first to be commissioned. The sculpture was designed to be put on a historical plinth that has been empty in Dublin since the original statue was removed in 1860s. The ‘exuberant’ sculpture was made first as a readymade, small-scale model which was then 3D scanned and printed to scale before assembly. The artist was inspired by different forms of emancipation from the area including Irish independence, EU Presidencies, tribunals of inquiry, and important civic events related to marriage equality and reproductive choice.
The sculpture after printing and papering and before installation (photo credits: Alan Phelan)
Magic Queen
One application for art in AM that might be a little out of the box is a project that was presented at the 2021 Venice Architecture Biennale, Magic Queen. Magic Queen is a 3D printed biodegradable structure made out of local soil that has been designed to be a landscape for different plants and mushrooms. It is tended to by a robotic gardener that both waters the landscape and senses for changes in surface texture and growth of the flora on the structure in order to maintain the landscape. The project was created by MAEIN, a practice led by Daniela Mitterberger and Tiziano Derme, and was designed as a way to show the fusion between organic materials and machines, proving the possibility of empathy and co-existence of the two. 3D printing with soil allowed the designers to create a unique structure perfectly suited to sustain life. You can find out more in the video below.
What do you think of our choices for 3D printing in the art sector? Did you already know some of these projects? Let us know in a comment below or on our Facebook and Twitter pages. Don’t forget to sign up for our free weekly newsletter, with all the latest news in 3D printing delivered straight to your inbox!
Multi-layer 3D printing helped accurately reproduce colors in paintings
3D printing
Complexity 3.8
Liand Shi et al.
/ SIGGRAPH Asia 2018
Engineers in the United States and Thailand have developed a method that allows 3D printers to print reproductions of paintings that faithfully reproduce the colors of the original. The method is based on printing many layers with inks of different colors, which makes it possible to get the color as close as possible to the original for each fragment of the picture. The development will be presented at the SIGGRAPH Asia 2018 conference.
Since the original paintings exist in a single copy, museums create their reproductions in order to provide access to more people, as well as to protect the originals from destruction. As a rule, reproductions are created using high-precision scanners and printers. But the possibilities of this technique are limited and do not allow making a reproduction completely identical to the original in all conditions. This is due to several shortcomings. One of them is that commonly used printers print with only four colors (CMYK), which reduces color accuracy.
Also, as a rule, printers produce a colorimetric rather than a spectral reproduction of the color of the original, due to which the printed picture is close to the original only under certain reference lighting.
A team of engineers led by Wojciech Matusik of the Massachusetts Institute of Technology has created a method for creating reproductions of paintings that accurately reproduces original colors regardless of lighting.
The process of creating a reproduction takes place in several stages: first, you need to create a high-quality scan of the original, then the 3D printing parameters are calculated, and after that, directly printing on a 3D printer. In order to get the most reliable information about the colors in the original picture, the developers created a special scanning camera. It consists of a substrate for a picture, a multispectral camera located above it and LED backlight panels located on the sides.
When scanning, the liquid crystal filter in front of the camera changes its 10nm bandwidth from 420nm to 720nm. At the same time, the camera takes monochrome pictures and eventually combines them into a single picture, in which 31 spectral values correspond to each pixel.
Printed color samples for calibration and setup diagram for scanning
Liand Shi et al. / SIGGRAPH Asia 2018
Share
To reproduce the scanned image, the developers used a 3D printer capable of printing with many different inks. In their scheme, color is defined by a combination of thin printed layers made from materials with different colors, and the classic method of creating a halftone image is used to smoothly change color. The developers have created two neural networks, one of which predicts the spectrum of an array of layers of different materials. Its authors trained on a printed plate with many millimeter-sized squares, consisting of different combinations of layers.
After training the first network, it was used to train the second neural network, which performs an inverse task - predicts the optimal arrangement of layers from different materials for the image provided to it.
After the layer map has been created, printing takes place directly. The engineers used the MIT MultiFab 3D printer, created in 2015 and capable of printing five materials simultaneously. For him, the developers have created 9 color inks, as well as two types of white. Calculations showed that printing with their method covers 79 percent of the sRGB color space. Engineers tested the method on different paintings and under different lighting conditions, and showed that it allows you to achieve much better color reproduction than printing with a CMYK printer:
Comparison of CMYK printing, original painting and proposed method under different lighting conditions
Liand Shi et al. / SIGGRAPH Asia 2018
Share
In 2016, another group of researchers created an "averaged" portrait based on Rembrandt's work and printed it on a 3D printer.
A feature of the work was that, thanks to 3D printing, the creators managed to convey the relief of a real portrait in oil.
Grigory Kopiev
3D print painting - Van Gogh's "Starry Night" painting recreated using 3D printing
3D print painting!
Vincent van Gogh's Starry Night is one of the most famous and iconic works of the Dutch artist. The vast majority of people, when referring to Van Gogh as a “distinguishing mark”, are very likely to name this particular painting, which has gained immense popularity all over the world. Moreover, this work aroused great interest in the biography and work of the artist as a whole, ironically giving him an unprecedented posthumous fame. “Starry Night” is admired, appreciated and viewed from different angles, since the painting, painted by Van Gogh during a deep emotional excitement, is an incredible expression of emotions that are really tangible in this work. It rarely happens for an artist to convey deep feelings to the public and display everything that is hidden in the creative soul, but “Starry Night” refers to such works, which fully explains its success.
3D printed painting!
In an effort to pay homage to Vincent van Gogh's magnificent painting and showcase the impressive artistic possibilities of modern 3D technologies such as 3D scanning and 3D printing, Canadian company Custom Prototypes has released a stunning 3D printed replica of Starry Night. The 3D printing services firm is based in Toronto, Canada and was driven more by a scientific interest in its purpose, although there was also a creative element to it. To create a 3D printed copy of the painting, the Custom Prototypes team produced a 3D model based on a high-resolution image of the original work, allowing the developers to focus on Van Gogh's original technique.
3D printed painting!
Each element of the painting has been carefully analyzed by 3D modeling experts to design a “3D canvas”. Using multi-purpose software such as Photoshop and Solidworks, the team developed a textured 3D model of the painting, which was 3D printed using stereolithography (SLA) technology to create highly detailed pieces.
For convenience, when 3D printing, the work was divided into 4 parts, for the manufacture of each of which (even the frame) a 3D printer was used.
3D printed painting!
After producing the textural part of the canvas, the team meticulously took up painting the painting to complete the creative process of recreating it. As the company explained in a press release, “Under the supervision of a professional art restorer, Custom Prototypes turned to an old oil painting technique. Due to the parallel careful analysis of every detail of the original sample, it took a lot of time to accurately reproduce all colors.” Upon completion of painting the canvas itself, the developers used special materials to create the effect of aging, after which the painting was varnished. The process of artistic processing took a total of about four weeks.
3D printed painting!
The work done is certainly impressive. What's more, attendees at the Additive Manufacturing User Group (AMUG) conference held in St.
