(506) 2240-6804
3D printer nozzle wrench
3DVerkstan Olsson Nozzle Tool | MatterHackers
- Home
- Store
- 3D Printer Accessories
- 3D Printer Nozzles
- Browse by Nozzle Brand
- Olsson Ruby Nozzles
Installing a 3D printer nozzle correctly requires a balance of enough torque to lock the nozzle in, but without applying as much as to damage or shear the nozzle tip from the threads. While torque wrenches are available that could be used for nozzle installation, these products are typically very large and expensive. From 3DVerkstan, the creators of the Olsson Ruby Nozzle comes this SLS 3D printed torque wrench that limits the force you can apply on a nozzle to the exact 1.5Nm needed for proper assembly.
Remove from wishlist Add to wishlist loading...
Product No. M-3FM-F8XC
| List Price: | $20.00 |
|---|---|
| Price: | $20. |
| Price: | $... |
Notify me when this is available
Never overtighten and risk damaging a nozzle again with the Olsson Nozzle ToolOf all the components in any 3D printer hotend, the most likely to be the subject of regular maintenance or replacement is the nozzle. Given how many different size nozzles are available today, changing from one to another for your next project is more likely than ever. For many hotend designs, nozzle installation is also an important factor in overall hotend construction and must be tightened to a specific torque setting for proper function. Brass remains a very popular material for 3D printer nozzle construction thanks to its ease of machining and high thermal conductivity. However, brass nozzles can be relatively easily destroyed if installed with too much torque.
This tool from the creators of the Olsson Ruby Nozzle is a lightweight, small tool that ensures you do not overtighten your nozzle thanks to the internal click-type mechanism. Simply screw in the nozzle like normal, and tighten it down with this wrench until it clicks.
Compact design with all the mechanics internalized
Perfect for Olsson Ruby and E3D Style nozzles alikeThe Olsson Ruby family of nozzles are a fantastic choice for abrasive material like NylonX, but also print everyday filaments like PLA and PETG with beautiful results. Because of this, many people have adopted the Olsson Ruby into their 3D printing fleet, but for those utilizing E3D style nozzles of any material in the v6, Volcano, and even SuperVolcano family, the 7mm socket included with this tool is perfect for installing those as well. No matter what kind of nozzle you are using and how often you are changing it out, the Olsson Nozzle Tool is a must-have in your 3D printing toolkit.
- Drive Size: 1/4"
- Included Socket Size: 7mm
- Torque Spec: 1.5Nm
- Material: SLS Printed Nylon
- Nozzle Compatibility:
- Olsson Ruby
- E3D Style
A Nozzle Swap Tool « Fabbaloo
By Kerry Stevenson on September 7th, 2018 in Hardware
Tags: hotend, nozzle, tool
The Z-Catch 3D printer nozzle removal tool [Source: Z-Catch]There’s a new Kickstarter project with a tool that many desktop 3D printer operators could use.
This a nozzle removal tool (and installer, too). It is a very simple, but specialized device that could overcome common issues encountered by 3D printer operators.
What is the problem being solved?
Today’s filament-extrusion 3D printers all push thermoplastic through a tiny nozzle. These nozzles have for most of the lifetime of 3D printers been installed at the factory and left there until the machine is retired.
But that’s changed in the past few years with the introduction of new and exotic 3D printing filament materials.
Operators demanded stronger materials, and they got them: materials providers devised composite filaments with mixes of metals and carbon fiber to increase strength. We’ve even seen a few products using carbon nanotubes as the strengthening agent.
The problem is that these materials contain substances that are in some cases substantially harder than the common brass material used to make most 3D printer nozzles. Thus over time the nozzles would slowly erode and you’d find your 0.4mm diameter nozzle is actually now 0.523mm in diameter, compromising print quality.
Another effect has recently emerged: larger diameter nozzles.
This has resulted from the enormous build volumes of some 3D printers. While they would certainly work with nozzles of conventional diameter, the print times would be ridiculously long. The brilliant idea was to swap in a nozzle of larger diameter, say 0.
6mm, 0.8mm or even 1.0mm to allow for faster prints. And indeed, these can dramatically speed up prints at the cost of resolution.
However, all of these scenarios involve the need to remove and replace nozzles periodically.
And doing so is actually quite a pain.
There’s a process involved in doing so, which goes something like this:
- Remove housings around the heater block if present
- Heat up the hot end to operating temperature
- Clamp the heater block with a large wrench
- Grasp the hot nozzle with another wrench
- Carefully turn the nozzle wrench – but NOT the block wrench – to release the nozzle
- Make sure you put a safe material over your print surface otherwise the hot nozzle may drop and melt your print bed
And that last point tells you something about why I don’t particularly like swapping nozzles.
The installation of a replacement nozzle is a similar process, but the important thing is that it must be done while the machine is hot in order to ensure it is securely mounted.
If you somehow accidentally rotate or move the heater block, you may introduce a small gap between the block and the cooling zone, which could result in a nasty problem afterwards.
In some cases it’s actually tricky to find the right size of wrench to fit the heater block. It’s just not a fun experience.
Now there seems to be a solution to all these matters with a new Kickstarter project.
The Z-Catch 3D printer nozzle removal tool [Source: Z-Catch]Miami-based Samuel Caillouette has developed a unique metal tool that’s specifically for changing hot 3D printer nozzles.
Nozzle Removal Tool For FDM 3D Printers
Samuel is raising funds for Nozzle Removal Tool For FDM 3D Printers on Kickstarter! This invention is a nozzle removal tool for FDM 3D Printers. Will allow the user to change different sized nozzles safely.
As you can see in the video, it’s trivial to swap nozzles, even when hot.
Caillouette is offering the design to the public at the low cost of USD$30, which also will include a 9-piece socket set.
Given the frustration I’ve had with nozzles, this could be a good purchase.
3D printer operators already have a ton of specialty tools, and I think this one should be added to your collection.
Via Kickstarter and Z-Catch
Really, How Bad Are Abrasive Filaments For Your 3D Printer Nozzle?
What kind of damage do carbon fiber filaments do to a 3D printer nozzle? How fast does damage occur? Experiments show a surprising result.
Have You Heard Of Runice’s 3D Printer Components?
Runice is an OEM manufacturer that provides hot end and extruder components to many 3D printer manufacturers.
What’s In E3D-Online’s Mystery Boxes?
E3D-Online produces some of the highest-quality 3D printer components used in the industry, and now you can obtain a batch of them at very low cost.
A Coaxial 3D Print Extruder?
Ever heard of a coaxial nozzle for 3D printing? This is an experimental version being used for unusual food 3D printing.
The ZCatch Nozzle Removal Tool
The ZCatch nozzle removal tool should be a tool found in every 3D printer operator’s toolbox.
3D Print Learning Series: Concepts
This is an entry in our 3D Print Learning Series, focusing on 3D print concepts.
An Airbrush-Style 3D Printer Nozzle?
There may be a far better way to 3D print small, finely detailed objects.
Finally: A Nozzle Swap Tool
There’s a new Kickstarter project with a tool that many desktop 3D printer operators could use.
Could This Be The Ultimate 3D Printer Nozzle?
Dyze Design has been producing interesting 3D printer components for years, but now they’re about to unleash something very powerful.
Socks for your 3D Printer Nozzle?
E3D announced a new product: HotEnd Socks. Is this a necessary item?
Kerry Stevenson, aka "General Fabb" has written over 8,000 stories on 3D printing at Fabbaloo since he launched the venture in 2007, with an intention to promote and grow the incredible technology of 3D printing across the world. So far, it seems to be working!
View all of Kerry Stevenson's posts.
Universal wrench for nozzles and heating block
search
400.
00 ₽
Do not accrue
You might like
Quick View
100.00 RUB
Quick View
$100.00
Quick View
300.00 RUB
Quick View
250.00 RUB
Customers of this item also purchased:
Quick view
180.00 RUB
Quick View
2,200.00 RUB
1,350.00 RUB
Quick View
$100.00
Quick View
500.00 RUB
2,000.
00 RUB
1,350.00 RUB
Quick View
700.00 RUB
There are 16 products in this category:
Quick View
200.00 RUB
Quick View
700.00 RUB
Quick View
200.00 RUB
Quick View
$40.00
Quick View
300.00 RUB
Quick View
550.00 RUB
Quick View
200.00 RUB
Quick View
2,400.
00 RUB
Quick View
150.00 RUB
Quick View
300.00 RUB
Quick view
280.00 RUB
Quick View
900.00 RUB
Quick View
$40.00
Quick View
300.00 RUB
Quick View
250.00 RUB
Quick View
400.00 RUB
Wrench for e3d heating block, nozzles mk8, e3d v6, mk10.
Universal tool for getting rid of many other tools and adjusting nozzle wrench size
Nozzles and drills for cleaning them for the extruder of a 3D printer 404
PLA plastic SEM 1.
75 Chocolate Material: PLA Color: Chocolate Diam…
PLA plastic SEM 1.75 Chocolate Yellow filament PLA 1.75 from SEM trademark is…
Price:
2000.00 RUB
Wireless radio module nRF24L01+. Transmission frequency - 2.4GHz
nRF24L01+ - one of the options…
Supply voltage: 1.9V … 3.6V Current consumption at 0dBm power: 11.3 mA Current consumption at…
Price:
RUB 400.00
PET-G - Transparent
PTEG plastic has: high impact resistance;…
Net weight – 1 kg (+/-50 g). Bar diameter 1.75 mm (+/- 0.05 mm). Recommended…
Price:
RUB 1700.00
Nozzle for 3D printer 0.4mm
Nozzle allows you to change the print quality…
Price:
RUB 90.
00
Steel nozzle 0.4 for 3D printer
Price:
150.00 RUB
WEMOS D1 Mini V4.0.0 TYPE-C USB WIFI on ESP8266
Features 11 digital input/output pins,…
Price:
RUB 500.00
Pulley 16 teeth
Pulley for GT2 belt. 16…
Price:
RUB 270.00
BMG extruder kit
Kit of plastic feed gears, shaft, needle bearings. Model for printing extruder - REF
Price:
RUB 620.00
PTFE Teflon Tube for Bowden Extruder RepRap VN F3mm HP F4 mm
PTFE Teflon tube for Bowden…
Price:
RUB 180.
00
Nozzle for 3D printer 0.4mm (E3D V6)
Spare nozzle for your 3D printer…
Price:
$90.00
NEMA 17 17HS4401
The most popular stepper motor for…
Price:
1800.00 RUB
Plastic gear coupling for MK8, stainless steel
Plastic gear coupling…
Price:
RUB 90.00
Ceramic heater 12V /24V 40w
Ceramic heater for 3D printers…
Price:
RUB 230.00
Belt GT2 (closed) 110mm.
Price:
RUB 200.00
Radial fan AV-5015S 12v
Type: centrifugal fan Size: 50*50*15mm Sleeve bearing.
Price:
280.00 RUB
RAMPS 1.4 3D Printer Control Board
RAMPS - RepRap Arduino Mega…
Mega 2560 REV3 ATmega2560-16AU Board + USB 9 Cable0006
Price:
RUB 1000.00
PLA plastic SEM 1.75 yellow
Material: PLA Colour: yellow Diameter…
PLA plastic SEM 1.75 yellow Yellow PLA filament 1.75 from SEM is…
Price:
2000.00 RUB
Cooling Fan 4010 DC 2Pin 12V 40mm 0.11A (for 3D Printer)
Cooling Fan for 3D Printer…
fan dimensions: 40 x 40 x 10 mm supply: 12 V Bearing type: plain bearing…
Price:
150.00 RUB
CNC Shield V4.0 for Nano Board CNC
Compatible controllers: Arduino Nano Number of axes: 3 (X, Y, Z) Logic part supply voltage: 3.
3 -…
Price:
RUB 600.00
Silicone cover for 3D printer (hot end sock)
Silicone sock for heating block,…
In the range, select the required size.
Price:
200.00 RUB
BIGTREETECH TFT35 E3 V3.0, touch screen
Features: Working mode: touch screen mode, 12864LCD mode Price:
RUB 7850.00
PET-G - Black
PTEG plastic has: high impact resistance;…
Net weight - 1 kg (+/-50 g). Bar diameter 1.75 mm (+/- 0.05 mm). Recommended…
Price:
RUB 1700.00
Flexible coupling 5x8
Coupling for connecting the stepper shaft…
Price:
RUB 130.
00
Nozzle for 3D printer 0.5mm
Nozzle allows you to change the print quality…
Price:
Rs. DC12V-DC24V, 5A-15ASize: …
Price:
RUB 9000.00
Heating cube Brass V6 (22x16x11.4mm)
Heating cube for hot end V6.
Material Brass For 100 kΩ therm. or HT-NTC100K Screws included.
Price:
RUB 400.00
3D printer Hercules 2018
Hercules 2018 - 3D printer from…
Printing technology FFF (Fused Filament Fabrication) Purpose Printer for home use Working area size, mm…
Price:
RUB 104000.00
Heating cube V6 (20x16x12mm)
Heating cube for V6 hot end
Material aluminum For 100 kΩ therm.
Screws included.
Price:
RUB 120.00
Bearing 608ZZ
Size 8x22x7 mm
Price:
120.00 RUB
Idler pulley for GT2 (for 5mm shaft)
Idler (free rotating) pulley width ...
Price:
160.00 RUB
A4988 Stepper Motor Driver
Price:
250.00 RUB
Ch440 nodemcu V3 Lua WI-FI based on ESP8266
V3 Lua WI-FI Integration module…
support for WiFi protocols 802.11 b/g/n Wi-Fi Direct (P2P), soft -AP built-in TCP/IP stack built-in TR switch,…
Price:
RUB 500.
00
Thermal barrier for V6 1.75mm (assorted)
Thermal barrier for extruder heat sink connection…
Price:
RUB 130.00
Heating table (Headbed) MK2B
Textolite plate with heating tracks.…
Power supply 12v/24v
Price:
1500.00 RUB
Servo tester (CCPM SERVO)
Output: ≤ 15 mA (5.0) Input: 4.2-6.0 V DC Output signal: 1.5 ms ± 0.5 ms Size: …
Price:
RUB 300.00
3D Printer Z-Axis Splitter
3D Z-Axis Splitter…
Used to connect two NEMA 17 stepper motors to one connector on the 3D control board…
Price:
RUB 300.00
Driver TMC2208 (v 3.
0) TMC2208 - stepper motor driver,…
Only two wires are used to transmit commands - STEP (step) and DIR (direction of rotation). Possibly…
Price:
RUB 700.00
Nozzle Cleaning Brush
Stiff brush for removing sticky plastic on the 3D printer nozzle.
Price:
RUB 160.00
NodeMCU Lua board (ESP8266 CP2102)
NodeMCU on ESP8266 module is…
Processor 32-bit ESP8266 WiFi module – 802.11 b/g/n …
Price:
1200.00 RUB
NodeMCU Motor Shield L293D for ESP8266 ESP-12E
The expansion board is based on…
Characteristics: Chip – L293; Number of channels for connection - 2: 2 DC motors; 1
Price:
RUB 350.
00
Airbrush nozzle for 3D printer (assorted)
Brass nozzle with steel tip.…
Price:
370.00 RUB
Charger for 18650 Shield V3 Micro USB Port Type-USB 0.5A
Charger for 18650 Shield V3 Micro USB Port Type-USB 0.5A for Arduino, Raspberry…
Price:
550.00 RUB
Sensor for Arduino barrier module IR and photoelectric sensor
"Sensor Infrared barrier"
Works like this: in standby mode, (while there is no obstacle, the sensor outputs a logical unit - and lights up ...
Price:
RUB 150.00
GT2 belt (fiberglass cord)
GT2 soft belt 6 mm…
Price:
Rs.
Type: Fixed Resistor Technology: Metal Film Colour: Blue
Price:
RUB 12.00
Display for 3D printer LCD 12864
Price:
3000.00 RUB
M3 Stud screw thermistor 100K NTC 3950
M3 Stud screw thermistor 100K…
An interesting solution in the form of a thermistor with M3 head thread. Fits most heating cubes, serves…
Price:
RUB 150.00
Nozzle for 3D printer 0.3mm
Nozzle allows you to change the print quality…
Price:
RUB 90.00
RFID RC522 card reader
The kit contains several parts that allow you to…
Power Voltage 3.3 V Current consumption in modes: standby 80 µA standby 12 mA normal…
Price:
RUB 500.
00
Pneumatic fitting PC4-M6 for PTFE tubing Teflon. For plastic 1.75mm
Pneumatic Connector PC4-M6 1.75 mm…
Price:
RUB 180.00
3d TOUCH Sensor (auto level sensor for 3D printer)
Analog of the BLTouch auto level contact sensor.
Automatic correction touch sensor for 3d printer, which can accurately measure the slope of the table surface. He…
Price:
RUB 1500.00
Cube MK8 mini (16x16x12mm)
Small heating cube for hotend…
Material aluminum For thermistor 100kOM
Price:
RUB 150.00
Optical Endstop (Resistop) FZ0640
The optical limit switch is reliable…
Price:
RUB 150.
00
Hercules Strong
Hercules Strong 2017 - Updated…
FDM Printing Technology Media ABS, PLA, HIPS, flexible materials (rubber, FLEX), WATSON, composites and…
Price:
180000.00 RUB
Stepper motor adapter (nameplate for A4988; DRV8825)
Board, for connecting a stepper motor…
88) or 32…
Price:
300.00 RUB
Linear ball bearing LM8UU
Linear ball bearing LM8UU for…
8 mm 8 x 15 x 24 mm
Price:
RUB 160.00
Wrench for V6 nozzle
Wrench for M2, M2.5, M3, M4. The widest throat for EVD6 nozzle Important!!! not suitable...
Price:
RUB 99.
00
Hotbed sticker (Adhesive table pad for 3D printer)
Size 200x200 mm.
Price:
RUB 500.00
Cooling fan for E3D V6 extruder
Fan with cooling mount…
Price:
400.00 RUB
Titan Extruder Hotend Feed Kit for 1.75mm 3mm RepRap Bar, Prusa i3, Bowden E3D J-Head V6 Makerbot MK8 MK10
Without motor!
TITAN feed kit
Price:
1300.00 rub
Joystick two-axis XY module
Price:
260.00 RUB
25A 3D Printer Desk Mosfette
3D0008 Mosfette module will help unload…
Price:
RUB 500.
00
PL2303 USB UART TTL Module (PL2303HX) with cable
Cable length 90 cm.
Price:
900.00 RUB
PLA filament SEM 1.75 silver
Material: PLA Colour: silver Diameter…
PLA filament SEM 1.75 silver Branded PLA filament SEM 1.75 silver is a quality filament…
Price:
2000.00 RUB
PLA plastic SEM 1.75 transparent
Material: PLA Color: transparent Diameter…
PLA plastic SEM 1.75 transparent PLA plastic SEM 1.75 transparent is a high-quality filament of domestic…
Price:
RUB 2000.00
PLA plastic SEM 1.75 green
Material: PLA Colour: green Diam…
PLA filament SEM 1.75 green Green polylactide filament for 3D printing, diameter 1.
75mm is…
Price:
2000.00 RUB
DRV8825 stepper motor driver
Price:
RUB 500.00
Plastic Feed Gear Mk7 MK8 Brass 40 teeth
Plastic Feed Gear…
Price:
RUB 140.00
Thermal adhesive tape
Temperature resistant tape for winding…
Width - 12mm Length - 33m
Price:
RUB 300.00
Nozzle cleaning drill 0.2 mm
To clean the nozzle…
Price:
RUB 70.00
Pneumatic fitting PC4-01 for PTFE Teflon tube. Plastic 1.75mm
Pneumatic Connector PC4-01 1.
75mm…
Price:
RUB 180.00
Sensor SN04-N NO
Inductive sensor (4 mm) If…
Price:
RUB 780.00
Light 3 Layer Super Grease
Grease for bearings and other…
Price:
RUB 280.00
Chimera double extruder. Complete kit 2 nozzles 0.4 + Fan
Double head bowden extruder…
Price:
1940.00 RUB
DIY kit MK8 aluminum extruder
Price:
V-Groove Roller with 624VV 4mm Bearing
Specifications: Type: 624VV Size: (Inside Diameter) 4mm/0.15" x (Outside Diameter) 13mm/0.51inchx(thickness) …
Price:
RUB 60.
00
Ceramic Heater 50W 24v
3D Printer Hot End Heater
F - 5mm Power - 50W Voltage - 24V Total length - 1m
Price:
250.00 RUB
E3D V6 (1.75mm) included
V6 j-head hotend included…
Price:
RUB 1350.00
Mechanical Endstop (limit switch)
Limit switch for any type…
Price:
RUB 190.00
3 in 1 Diamond Hotend Extruder Nozzle 0.4mm for 1.75mm
This nozzle allows you to print at the same time…
To work, you need to purchase the nozzle itself and separately three V6 extruders. Or three thermal barriers for…
Price:
RUB 900.
00
Thermal barrier V6 dual hotend
Assortment: Through-hole for PTEE tube…
Material: stainless steel. Throat diameter: 7mm Throat thread: M6 Diameter: for 1.75mm
Price:
RUB 145.00
PLA plastic SEM 1.75 blue
Material: PLA Colour: blue Diameter…
PLA plastic SEM 1.75 blue
Price:
RUB 2000.00
3D Printer Key
Nozzle/Heating Block Replacement Key…
Price:
150.00 RUB
V-Slot rail v-wheel eccentric bushing
Allows roller to be pressed against…
Price:
Rs. Cable length: 1 meter. This sensor is versatile and can…
Price:
RUB 350.
00
PLA Plastic SEM 1.75 Red
Material: PLA Colour: Red Diameter…
PLA Plastic SEM 1.75 Red Yellow PLA filament 1.75 from SEM is…
Price:
RUB 2000.00
Filter spacer for TMC2100 drivers; A4988; Drv8825
Silent step protection is an optional module step and compatible Pololu A49 motor driver88. The board provides an output ...
Price:
210.00 RUB
Radiator Ender 3 CR10
Dimensions: Length - 27mm Width - 20mm Thickness - 13mm Diameter for thermal barrier - 7…
Price:
170.00 RUB
Nano 3.0 controller Nano Ch440
The Arduino Nano is a full featured…
Miniature module based on the popular ATMEGA328P microcontroller. Ideal for prototyping using solderless breadboards…
Price:
RUB 950.
00
Trapezoidal screw T8 for 3D printer with nut
Stud or threaded axle for…
Trapezoidal screw allows you to convert rotational motion into translational.
Price:
RUB 1500.00
PLA plastic SEM 1.75 Violet
Material: PLA Colour: Violet Diam…
PLA plastic SEM 1.75 Violet Yellow PLA filament 1.75 from SEM brand is…
Price:
2000.00 RUB
Aluminum heating block MK7;MK8 (hot end)
20x20x10mm Thread-M6
Price:
RUB 230.00
Flanged bearing F623ZZ
Flanged bearing F623ZZ
Price:
RUB 90.00
PLA plastic SEM 1.
75 Golden metallic Material: PLA Color: Golden metallic…
PLA plastic SEM 1.75 Golden metallic Yellow PLA filament 1.75 from SEM –…
Price:
2000.00 RUB
Radiator V6 (in stock)
There are several types, available in stock - Under fitting for bowden material supply. For Direct submission.
Price:
RUB 400.00
Cleaning nozzle for 3D printer 0.4mm.
Nozzle Cleaner 3D…
Price:
RUB 90.00
Nozzle Cleaning Drill 0.3mm
To clean the nozzle…
Price:
RUB 50.00
Thermal barrier V6, MK8, CR-10 dual hotend 30mm
Assortment: Full metal Limited with PTEE
Material: stainless steel.
Length - 30mm Neck diameter: 6mm Neck thread: M6 Diameter: for…
Price:
RUB 150.00
Hercules G2
Printer productivity - 100 cm3/h.…
Maximum productivity - up to 100 cm3/h, flexible materials - up to 55 cm3/h Printer dimensions, mm…
Price:
219000.00 rub
WI-FI ESP8266 module type ESP-12E
WiFi module based on ESP8266.…
- Support for wireless standard 802.11 b/g/n; - Support for 2 modes of operation Wi-Fi Direct (P2P), soft-AP; …
Price:
RUB 800.00
Toothed gear for plastic feed Mk7 MK8, brass 27 teeth
Size: Length 11mm Diameter 10.9mm…
Size: Length 11mm Diameter 10.9mm
Price:
RUB 130.
00
Anti-play nut T8 (pitch 8mm)
Under T8 trapezoid. Step…
Anti-play nut prevents subsidence of the structure that moves linearly along the trapezoidal screw. Also…
Price:
RUB 400.00
Heating block CR8 CR10
Dimensions 20x20x10mm.
Price:
RUB 300.00
CNC Shield v3.0 Expansion Board (FOR CNC)
Expansion Board for creating CNC…
Model - CNC Shield version 3.0; Size - Arduino UNO and other compatible boards; Quantity…
Price:
RUB 600.00
PET-G - Silver
PTEG plastic has: high impact resistance;…
Net weight – 1 kg (+/-50 g). Bar diameter 1.75 mm (+/- 0.05 mm). Recommended…
Price:
RUB 1700.
00
Tension spring for GT2 belt
Spring for tensioning the belt 6…
Price:
RUB 50.00
Belt GT2 (metal cord)
metal cord 6 mm wide.
Price:
RUB 230.00
Head Bad table for 3D printer 220x220mm. 3mm.
Price:
Rs. Bar diameter 1.75 mm (+/- 0.05 mm). Recommended…
Price:
Rs. Bar diameter 1.75 mm (+/- 0.05 mm). Recommended…
Price:
1700.00 RUB
Roller for 3D printer POM 3D0004
Two bearings, metal washer. For…
POM plastic wheels with MR105 bearing.
Price:
RUB 190.00
Belt GT2 (closed) 200 mm.
Price:
Rs. DC12V-DC24V, 5A-15ASize: ...
Price:
RUB 6500.00
Bearing 625Z
Dimensions 16x5x5 mm.
Price:
RUB 60.00
PET-G - Lilac
PTEG plastic has: high impact resistance;…
Net weight - 1 kg (+/-50 g). Bar diameter 1.75 mm (+/- 0.05 mm). Recommended…
Price:
RUB 1700.00
3D Printer Bar Sensor
Module triggers when the plastic bar runs out…
When properly integrated, the sensor will help to pause the 3D printer if the print bar runs out.
…
Price:
700.00 RUB
Bowden Extruder E3D V6 (1.75mm)
V6 j-head Hotend for 1.75…
Price:
RUB 1200.00
BMG extruder (dual drive)
Price:
RUB 1600.00
Nozzle for 3D printer 0.2mm
Nozzle allows you to change the print quality…
Price:
90.00 RUB
PLA plastic SEM 1.75, white
Material: PLA Color: white Diameter…
PLA plastic SEM 1.75 white Brand plastic for 3D printing — PLA plastic SEM 1.75…
Price:
2000.00 RUB
Spring for 3D printer (for table, for direct)
Spring that is used in the construction of…
Material diameter: 1.
2 mm Outer diameter: 7.5 mm Inner diameter: 5 mm Length: 20 mm
Price:
RUB 40.00
PLA plastic SEM 1.75 Gray
Material: PLA Colour: gray Diam…
SEM 1.75 PLA plastic Gray Yellow PLA 1.75 filament from SEM brand is…
Price:
2000.00 RUB
HT-NTC100K Thermistor (B3950)
Temperature measurement head size: 3*15mm Temperature measurement range: -50℃~+350…
Price:
200.00 RUB
Arduino TCRT5000 line sensor
Use of infrared reflection sensors TCRT5000 Test distance: 1 mm to 25 mm Current 15 mA.…
Price:
RUB 150.00
Thermal barrier MK8 1.75mm (with Teflon 30mm/40mm/50mm)
Thermal barrier 30mm, stainless steel.
Thread M6.…
Price:
RUB 210.00
PLA plastic SEM 1.75 orange
Material: PLA Colour: orange Diam…
PLA plastic SEM 1.75 orange Bright orange material for FDM printing is PLA plastic SEM…
Price:
2000.00 RUB
Laser sensor Arduino 650nm module 6mm V 5 mW.
Operating voltage: 5V Current consumption: 30mA Wavelength: 650 nm Beam color: red Module dimensions: …
Price:
150.00 RUB
PTFE Teflon Tube for Bowden Extruder RepRap VN F 2mm HP F4 mm
PTFE Teflon Tubing for Bowden…
Price:
RUB 185.00
HOTEND insulation for 3D printer
Cotton insulation for hotend.
Help…
Price:
RUB 25.00
PVA plastic SEM 1.75 0.5 kg natural
Material: PVA Filament diameter: 1.75…
PVA plastic SEM 1.75 0.5 kg The SEM trademark represents the ideal material for printing supports…
Price:
RUB 4990.00
Pulley 20 teeth
Pulley for GT2 belt. 16…
Price:
RUB 150.00
PLA plastic SEM 1.75 black
Material: PLA Colour: black Diam…
PLA plastic SEM 1.75 black Proprietary plastic for 3D printing — PLA plastic SEM 1.75…
Price:
2000.00 RUB
Nozzle cleaning drill 0.5mm
To clean the nozzle…
Price:
RUB 50.
00
Knife for cutting PTFE tube (stripping wires)
Price:
100.00 RUB
CR-10 Hotend
(1): Radiator Heatsink: Suitable for CR-10 Hotend Extruder For 1.75mm (2): Heater Block Suitable…
Price:
800.00 RUB
Mega 2560 REV3 ATmega2560-16AU Board + USB cable
Apduino ATmega2560-16AU is a common solution…
This board differs from other Apduinos with more inputs and outputs, more memory and…
Price:
RUB 2250.00
MG995 Metal Gear High Torque Servo
Servo for various applications…
Dimensions: 40 mm x 19 mm x 43 mm Net weight: 69 g Package weight: 75 g Colour:…
Price: 1200.
00 RUB
Gear for plastic feeding Mk7 MK8,BMG 40 teeth
Size: Length 12mm Diameter 11.8mm…
Size: Length 12mm Diameter 10.9mm
Price:
$160.00
Arduino Nano Shield V3.0 Expansion Board
The Expansion Board makes it easy to…
Price:
RUB 600.00
Knife for plastic (secateurs for 3D rod)
Secateurs for plastic
Price:
RUB 150.00
MKS CD 57/86 Stepper Motor Driver
Expansion board for connecting an external…
The proposed board is installed in the standard connector for the stepper driver. Wire included.
Price:
RUB 500.
00
PLA Plastic SEM 1.75 Pink Pastel
Material: PLA Color: Pink Pastel…
PLA Plastic SEM 1.75 Pink Pastel Yellow PLA filament 1.75 from SEM –…
Price:
2000.00 RUB
Kee Pang Mk8 3D printer extruder, red
Price:
RUB 800.00
Thermistor 100k ohm NTC 3950 (extruder thermal sensor)
Thermal sensor for 3D printer Length…
Price:
RUB 150.00
Nozzle cleaning drill 0.4mm
To clean the nozzle…
Price:
RUB 50.00
Hotend MK8 (hotend Prusa i3) heating element kit
Hotend for Prusa i3 consists of…
Price:
800.
