3D printed rubber band plane

▷ rubber band plane 3d models 【 STLFinder 】

Rubber Band Plane


Rubber Band Plane

Rubber band plane propeller


Rubber band plane propeller

Balsa rubber band plane


This time it is a simple oldschool rubber band plane. While waiting for its maiden flight I decided to share the 3D model of the plane with the GrabCAD community. ... (Link for the plane:...

Rubber Band Plane


This is a rubber Band powered plane that is fully 3D printable. it is still a work in progress and yours may need a bit or tweaking before it flies properly. ... i suggest printing with 1 perimeter and 5 top and bottom layers The rubber band holder and...

Rubber Band Plane / Glider


# Rubber Band Powered Plane This is a fully functional and flying plane. It only requires a small amount of assembly to get it going. Full flight video coming soon! You will need the following tools and components: - Rubber band / bands - Super glue...

rubber band plane (flies)


... in back. wind up and throw. best results put plastic on wing holes and use really stretchy rubber bands< so no one was gunna message me about how a whole part of the plane was missin? . ..i realized this and updated it just export both into cura

Rubber Band Plane Mount


This is a rubber band mount that I've made for a paper airplane to allow it to fly by a rubber band, I have not yet tested it but I will update this when I do

Rubber-band powered plane


This is a rubber-band powered plane that is powered by a rubber band and flies(REALLY!?!!?!). P.S:Sketchup or stl conversion screwed up scale. ... Instructions Remove support material,cover frame with cloth or paper,and if you can't figure the rest I'm...

Rubber Band Plane 3D print model


All you have to do is attach a rubber band, twist the blade, and watch it fly! Fun for all ages, from the print to the skies! . ..

none-Rubber Band Propeller plane


I printed Rubber Band Powered Plane #TINKERFUN ,but seems not that good. I seperated Propeller and  redesign Motor Mount. Emm, much better. ... Have a try!

Rubber Band Powered Plane


This is supposed to be a working rubber band powered toy plane. However the wings and fuselage were too heavy to fly. ...Works best as a model.

Rubber Band Powered Plane


(with caution) Materials: THIS Paper Airplane (https://www. youtube.com/watch?v=3DG2h3-d-jQ) Rubber band 3D Printed Motor Mount 3D Printed Propeller Follow this Assembly and Flying (https://vimeo.com/399344896) You will need some type of adhesive and...

Rubber Band Powered Plane #TINKERFUN


This Rubber Band Powered Paper Plane will soar through the air, perform awesome stunts and more! An awesome toy for the Great Outdoors and even inside! (with caution) Materials: THIS Paper Airplane Rubber band 3D Printed Motor Mount 3D Printed...

Plane Rubber Band Winder


The idea is you put this bad boy in your drill and use it to wind up the rubber band on a rubber band powered plane

Propellers for rubber band models and planes


Propellers for model planes and rubber band propelled vehicles. Suitable for electric motors also. 2 blades model, 3 blades model and 4 blades model. Works best for planes with wingspan between 30cm and 50cm. For different sizes, please scale the...

Propellers for rubber band models and planes


Propellers for model planes and rubber band propelled vehicles. Suitable for electric motors also. 2 blades model, 3 blades model and 4 blades model. Works best for planes with wingspan between 30cm and 50cm. For different sizes, please scale the...

Propeller spinner plane Extra-300 rubber band model


Part weight 1. 3 grams. I did not check it at work. Settings for Cura 15.04.6 because the computer does not pull a new program. The propeller head fits tightly onto the propeller. ... Propeller: ...

Propeller spinner plane Yak-3 rubber band model


Part weight 2.3 grams. I did not check it at work. Settings for Cura 15.04.6 because the computer does not pull a new program. The propeller head fits tightly onto the propeller. ... Propeller: ...

Rubber Plane Winder Drill Adapter


My kids had rubber band planes and I got a sore finger winding them. This was a quick solution to my problem! Should fit most small rubber band planes. Put it in a drill chuck and wind! ... I used 100% infill for strength.

Rubber Band


Rubber band is a short length of rubber and latex formed in the shape of a loop and is commonly used to hold multiple objects together.

rubber band


that's just it, use ninja flex and you have a rubber band Instructions use ninja flex

Rubber Band


Not really rubber, but printed with TPU filament. ... bands are 1.6 mm thick x 6 mm wide.

Rubber band


20x.5.5 mm TPU rubber band for the Sycamore project already up here on ThingiVerse. The battery will pop out when you catapult the sycamore into the skies. Mine did, as I didn't have a strong and small enough rubber band handy. So I knocked this up...

Rubber powered plane


Rubber powered plane

Toyplane Rubber band Holder


Just a simple Rubber Band Holder for Toy Planes

Rubber band rail


rubber band rail




Rubber Band Car


Rubber Band Car

Duplo Rubber Band Loglifter


Duplo Rubber Band Loglifter

Rubber band gun


Rubber band gun

3d Printed Rc Plane - Etsy Singapore

Etsy is no longer supporting older versions of your web browser in order to ensure that user data remains secure. Please update to the latest version.

Take full advantage of our site features by enabling JavaScript.

Find something memorable, join a community doing good.

( 50 relevant results, with Ads Sellers looking to grow their business and reach more interested buyers can use Etsy’s advertising platform to promote their items. You’ll see ad results based on factors like relevance, and the amount sellers pay per click. Learn more. )

STL file Spitfire aircraft model for laser cutting or 3D printing・3D printed model for download・Cults

Share Add to ?

Quality of creation: 5. 0/5 (2 votevotes)

Ratings of participants on printability, usefulness, level of detail, etc.

  • ♥ 12 i like s
  • eleven downloads
  • one make

3D Model Description

  • Print or laser cut all parts

  • Designed to work and assemble like old balsa wood aircraft with elastic band

  • Aircraft wingspan ~ 420 mm

  • Watch assembly video below:

https://www. youtube.com/watch?v=KGvR3ibxaFY

  • Check out my other similar Hawker Hurricane MKII build I just uploaded:


  • Some details, such as the cockpit and nose of the aircraft, have been optimized for printing on a spiral vase.

Printing Instructions:


  • Layer Height 0.1 mm

  • 6 top and bottom layers

  • auxiliary material

  • 2 rafters

  • without skirt

  • Print as is and do not turn over. It should be nose down and hole up.

  • Sand, prime, sand and paint for a smoother finish. See photos and videos for examples.


Cockpit (spiral vase model)

  • Layer height 0.1 mm

  • spiral vase model with two mirrored cockpits

  • cut one of them after printing

  • use marker to color in window trim after printing and trim excess material

Cockpit (solid model)


All other parts

Use the A3 layout provided to correctly position the fuselage and wings parts. When you have assembled the wings on the center section, lift the outer edges of the wings 1.8 cm as shown in the video. Please note that I used a pair of green Li-ion batteries as stands. You can use any item that has a similar height. Also look at the overview photo (with marks and arrows) to get an idea of ​​where each piece should be placed. Otherwise, at some point you can get confused in the names of the parts.

Use a thick paper clip to make a crochet hook and elastic pin. You can cut the paperclip wire in half. Use one of these halves as an axle for the propeller. At one end, the axle will be connected to the propeller and inserted into its hole, and at the other end you will need to shape it and make a hook out of it for attaching the tape. Insert the hook from the inside of the nose cone as you see in the video, and after it is inserted into the nose hole, secure the propeller in place with a drop of superglue (see black picture).

Someone asked me this question and I'm posting it here because I think it's good information that other people might be interested in.

JM: They were great planes, weren't they? I miss the days of balsa and paper a bit, but I love the idea of ​​printing details.

Question: Why weld parts instead of gluing them together?

MT: It is of course possible to glue parts together, especially if you laser cut wooden or cardboard sheets. I decided to weld them for the simple reason that I had a quick build that I could share with my son and record a short video. I created these pieces inspired by an old balsa wood aircraft design from the 80s. I realized that there are not many such models posted on Thingiverse and other sites. Today people have cardboard cutters and CNC laser cutters and can easily do weekend crafting with their kids, as I did with my son, but there are no models anywhere. I've checked ebay and online marketplaces for old balsa wood models for sale, but they're either too expensive, already assembled, or out of stock. Rather, you can find lego sets or disassembled drones, but these are not the same thing. If you look into hobby shops, you will most likely find balsa aircraft kits, but most of the parts will be semi-assembled. For example, the wing consists of 2-3 pieces that need to be glued together, while the fuselage consists of 5-6 U-shaped segments. They simplified assembly to make it faster. Perhaps today's children do not have the patience to spend 2-3 days on assembly, and they prefer to finish it in one day. But on the other hand, my child will probably never understand the shape of the wing rib and why it should be so if the wing comes assembled in a kit.

Have fun and post pictures after you make your own.

3D Printer File Information

  • 3D Design Format : STL Folder details close
    • Spitfire_body_B1.stl
    • Spitfire_body_B2.stl
    • Spitfire_body_B3. stl
    • Spitfire_body_B4.stl
    • Spitfire_body_B5.stl
    • Spitfire_body_B6.stl
    • Spitfire_body_B7.stl
    • Spitfire_body_B8.stl
    • Spitfire_carburatror_air_scoop.stl
    • Spitfire_cockpit_for_solid_print.stl
    • Spitfire_cockpit_for_spiral_vase.stl
    • Spitfire_exhaust_array.stl
    • Spitfire_front_wheel.stl
    • Spitfire_front_wheel_holderL.stl
    • Spitfire_front_wheel_holderR. stl
    • Spitfire_fuselage_A1.stl
    • Spitfire_fuselage_A2.stl
    • Spitfire_fuselage_A3.stl
    • Spitfire_fuselage_trim.stl
    • Spitfire_fuselage_trim2.stl
    • Spitfire_motor_plate.stl
    • Spitfire_nose.stl
    • Spitfire_oil_cooling_radiator_housing.stl
    • Spitfire_prop.stl
    • Spitfire_tail_C1.stl
    • Spitfire_tail_C2_flap.stl
    • Spitfire_tail_D_flaps.stl
    • Spitfire_tail_D_wings. stl
    • Spitfire_under_housing.stl
    • Spitfire_wing.stl
    • Spitfire_wing_a.stl
    • Spitfire_wing_b.stl
    • Spitfire_wing_c.stl
    • Spitfire_wing_fair.stl
    • Spitfire_wing_middle_a.stl
    • Spitfire_wing_middle_b.stl
    • Spitfire_wing_rib_F1.stl
    • Spitfire_wing_rib_F2.stl
    • Spitfire_wing_rib_F3.stl
    • Spitfire_wing_rib_F4.stl
    • Spitfire_wing_rib_F5. stl
    • Spitfire_wing_rib_F6.stl
    • Spitfire_wing_rib_F7.stl

    Learn more about formats

  • Last update : 2019-06-14 01:21
  • Publication date : 2019-04-29 15:54 ?

    Published on Thingiverse on: 2019-04-02 02:35





Design 41

Downloads 864

Liked designs 40 Subscribers 26


I'm a former Romanian HW engineer and I recently moved to Papua New Guinea for a few years.
I used to be involved in hardware designing electronic modules for the automotive industry. Now I am working as a maintenance engineer for an aid organization and help with the development of the III-rd world countries.

Send a donation

The collection associated with this 3D model

Complete RC Hawker Hurricane - 3D printed project

10.30 €

Case for flash drive

0.67 €

Hood Piper CUB

4.12 €

LM2596 USB module case (aka Brian Box)

0.67 €

End stop holder

0.67 €

Temple of Solomon 955 BC (my personal opinion)

4.12 €

Double extruder MK8 for Prusa / Mendel

4.12 €

RC Helicopter Jesus Nut

0.67 €

Best 3D printer files in Game category

Playmobil size europalette


Fivehorned beetle (Eupatorus Gracilicornis)


Gizmo - Robotic Dog


Euoplocephalus from the makers of Dr Fluff




Secret design


2. 58 €

Flexi Raptor (Dual Extrusion)


Bestsellers in the Game category

Articulated dragon

4.11 €


3.08 €

First Line Attack Troops - Truescale

5 €

Snake and rattlesnake

4.11 €

Cute flexi unicorn

1.05 €

Tiny space elves - leaders

5 €

Altair Amberwatch

10.30 €

Octopus 2.0

4.11 €

Marines EC Mk IV (now pre-supported)

10.29 €

VoTank : Heck'o'tons Mobile Fortress

5.65 €

Catafrac Heavily Armored Warriors - Limbs Set

1,85 €

Emberfolk Fighters

10. 30 €

Champion Alteyra

5.15 €

Flying unicorn

1.05 €

Lev Fu

5,50 €

Voidwalker Exosuits Truescale

14.83 €

Do you want to support Cults?

Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people , so support us in keeping up the activities and making future designs is very easy. Here are 4 solutions available to everyone:

  • AD: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Shop online with our affiliate links here Amazon.

  • DONATIONS: If you want, you can donate via PayPal here.

  • * INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!

Top 20 3D printed toys

Why 3D print toys? What toys can be 3D printed? 1. Mini monster truck 2. Surprise eggs 3. Gliders with elastic band 4. Folding sword 5. Micro catapult 6. Spinning top 7. Moving animals 8. Spirograph 9. Transformers 10. Toy tool set 11. Castle 12. Lego bricks 13 14. Edible toys 15. Anti-stress keychain 16. Chunky Trucks set 17. Sword rattles 18. Vikings Squigglepeeps 19. Math Spinner 20. Jumping Turtles Results

Today, 3D printing is developing and spreading very rapidly, gaining more and more popularity. And no wonder, because 3D printing is an invaluable tool for prototyping designs, creating mockups, fabricating parts, and more. At the same time, it is no longer difficult to buy a 3D printer at an affordable price even for home use. However, a 3D printer is not only a tool, it is also a kind of toy. A toy capable of creating other toys! Using a 3D printer to make toys gives you control over the material, color, size and other components, so the models you create with 3D printing will be unique!

But what if you don't have your 3D printer and you need to print a toy or some part of it? It doesn't matter, in this case our 3D printing studio will help you! You only need to place an order by uploading the file of the desired finished model, after which our specialists will contact you to calculate the cost and resolve other possible issues.

Why 3D print toys?

This is probably the first question that comes to mind, and it is not surprising, because often 3D printing can cost you more than the cost of such a toy in the store. But there are also a number of advantages of 3D printing, as well as cases when it would be more profitable and appropriate to turn to creating models on a 3D printer.

  • As already mentioned, a toy printed on a 3D printer can be absolutely unique due to the ability to give it exactly the shapes, sizes and colors that you and your child want.
  • Some toys can be difficult to find in the store, and their cost may exceed the cost of their printed copy.
  • Sometimes you only need to replace one or a few broken or missing parts of a toy, such as a building toy. In this case, it will be much more profitable and more expedient to use a 3d printer than to buy a whole set for a high price.
  • An important factor is, of course, the impressions of the 3d printing process itself, which will captivate both a child and an adult. And the positive emotions of your child from the toy you created will be the best reward!
  • And for those who are just getting acquainted with their printer and 3d printing in general, the process of creating toys will be an excellent, exciting simulator to improve their skills and gain experience.

Which toys can be 3D printed?

In the context of constant development and increase in the possibilities of 3D printing technology, you can create almost any toy on a 3D printer, but the result largely depends on the capabilities of your device, your abilities, as well as the time, resources and effort that you are willing to devote to this process. Therefore, more or less simple projects are most often created on a 3D printer. But the relative ease of manufacture does not mean boring finished products! Below we will give you a list of 20 interesting 3D printed toys that are not particularly difficult to create. Among these crafts you will find toys for children of all ages, including the smallest: mechanical products, motion figures, building blocks and even rattles! For each toy from the list, we leave a link to the finished model so that you can try them yourself. So let's get to know them better!

1. Mini monster truck

Two monster trucks. Source: Thingiverse

Not everyone can afford a monster truck, but if you have a 3D printer, you can print yourself a mini copy of it... which is almost as cool. Thanks to the all-printed suspension and removable discs that attach easily and without the aid of glue to the body, this truck is perfect straight from the printed surface.

You can even choose from a variety of body styles and wheels. And for a two-tone tire, stop printing the wheel at 19.8 mm and replace the filament.

Model files for download can be found here.

2. Surprise eggs

Surprise! Source: Twitter

Bigger is not always better. And often the most interesting thing is just a small size, and these 3D printed eggs with a surprise are an example of this.

These tiny cars with moving wheels and other accessories are amazing! Plus, you have plenty to choose from, as you can print surprise eggs with just about anything inside, be it a fire truck or even a fighter plane!

No support required for these models. We advise you to use at least 40% infill to make sure that small elements are both beautiful and durable. Given the number of such tiny parts these machines have, be prepared that printing them can be a real challenge for you, but with good calibration and fine tuning of your machine, everything will work out in the best way!

3. Elastic Gliders

Get ready to take off! Source: Thingiverse

With 3D printed gliders you will be able to “pull” even more fun out of regular rubber band ! Just 3 simple steps, and your glider will take off: hook it with an elastic band, pull it towards you and release it.

With this model on Thingiverse, you and your friends can take to the skies a whole fleet of these rubber gliders!

100% infill and a layer height of 0.1 mm are recommended for greater aircraft strength and longer life for thin wings.

4. Folding sword

Telescopic pirate sword. Source: Thingiverse

This toy may not be best given to a child when there are breakable items nearby. But in the right environment, telescopic swords will bring tons of fun and enjoyment to kids! From the designer of this folding pirate sword, you can also find models of telescopic katana, daggers and even lightsabers!

This Telescopic Pirate Sword is designed for printing at low speed using a 0.4mm nozzle. Also, successful printing requires a printer with a good retract and precise settings for Coast (turning off extrusion at the end of the layer print) and Wipe (“wiping” the nozzle at the end of the layer).

5. Micro Catapult

Hit all your enemies (or at least the roommates). Source: Thingiverse

This little catapult is a great toy for kids and bored office workers alike. She can throw small crumpled pieces of paper and any other small things that will fit in her. Selected ammunition can fly about 2 meters, which is enough to hit unsuspecting victims at another table!

This model is an all-printed prefabricated assembly that does not require any supports or special adjustments. A minimum filling and layer height of 0.25 mm is sufficient.

Despite the fact that many catapults are made from PLA plastic, the author of the design still insists that this model is not for PLA, but for ABS plastic. We can also recommend PETG filament for this printing, which has the best qualities of PLA and ABS.

6. Top

The oldest toy for the whole family. Source: Thingiverse

As far as we know, the spinning top is one of the oldest toys in the world. In ancient times, tops were made from almost any material: from stone and wood to fruits and nuts. And now additive technologies allow you to make your own spinning top using a 3D printer! All you have to do is print this model, glue the pieces together and have fun with this simple yet fun toy!

Offered 0.2 mm layer height and 20% infill.

7. Moveable animals

Cute articulated octopus. Source: Thingiverse

Making flexible prints on a 3D printer has become completely affordable and common practice thanks to special filaments such as TPU. But what if we said that you don't have to use flexible plastics to create flex parts?

Using excellent hinges that are printed in one piece with the entire model, you can create movable flexing toys even from plastics such as PLA, ABS and PETG, without any additional settings and adjustments.

The standard specifies a layer height of 0.2 mm and an infill of at least 15%.

The most popular of the models:

  • Octopus
  • T-Rex
  • Lizard

8. Spirograph

Convenient case for creativity at any time. Source: Thingiverse

Everyone knows the children's toy spirograph, which allows you to easily draw masterpieces with repeating geometric patterns. But this model has gone a little further and is a whole case containing a platform for drawing and a compartment for storing gears and paper. It fits easily into your pocket, backpack and bag, so you can take it with you and paint whenever you want!

The case has several levels. The lower level holds slips of paper for notes, drawing gears and, if desired, a small pencil or pen, if, of course, you can find one. The next level provides a secure, flat drawing surface so you can make art while walking! The top level has fixed gear teeth and holds the piece of paper in place.

A layer height of 0.2 mm and an infill of 20% or more is recommended. As a loop, a regular straightened 1.75 mm filament thread is used.

9. Transformers

Toys from the planet Cybertron. Source: Thingiverse

Transformers are still a hugely popular children's toy, so these Optimus Prime and Megatron will definitely appeal to your children.

This printed Optimus Prime transforms from a classic Optimus truck into a fully functional standing robot. And it's amazing, considering that you immediately get a ready-to-use all-printed model right from the printing platform, which does not even require supports!

But, of course, every Optimus needs an opponent to fight. Therefore, you can also print Megatron, but it should be noted that his model is more difficult to print and consists of two parts.

10. Set of toy tools

The first tools for little craftsmen. Source: Thingiverse

The Toy Tool Set is a great way to introduce kids to basic tools, their look, purpose and how they work. Print your child's first hammer, screwdriver and pliers and he'll feel like a real craftsman!

The hammer is modeled to fit two pieces together with a screw, but some users simply glue them together, which is just as beautiful. You can also use a hammer to assemble pliers: just lay the two pieces on a flat surface with the screw down and tap lightly a couple of times.

Model can be found here.

11. Castle

Build your own medieval world! Source: Thingiverse

This medieval castle playset is meticulously designed for 3D printing. Walls and towers are easily attached to each other with a simple connection. You can make as many details as you want to create a large or small original castle layout of your own! The set contains walls, towers, houses, characters, animals and a variety of props to add to the fun of this medieval set.

All parts are small enough to be printed comfortably even on 3D printers with a small print area: 140x140x140mm. For such purposes, the Flashforge Creator Pro 2 3D printer is perfect, equipped with two independent extruders and has excellent printing accuracy. This printer will cope with the study of small details, and two extruders will help you print several parts at once or one part in two colors!

12. Lego bricks

Your favorite constructor is now more accessible! Source: Pinterest

LEGO is one of the most popular toys for children. At the same time, the cubes of this designer are made of ordinary ABS plastic. So, having your own 3D printer, you can print the missing/lost Lego bricks yourself or even some of your author's design of the details of this amazing designer! At the same time, you can use not only ABS, but also other 3D plastics: PLA and PETG are also great.

Thingiverse has a lot of Lego models, and we'll take a look at one of them. It's customizable model of several different LEGO and LEGO DUPLO pieces. These bricks are not completely identical to real Lego, but they are compatible in every way.

13. Ballista

Fire! Source: Thingiverse

Introducing a fully printed ballista model, ready to use right out of the box. One has only to set the string and load the projectile, and this ballista will impress you with its simplicity and good range of the arrow. As a bowstring, you can use several layers of thread or ordinary stationery gum.

Recommended to print in PLA or PETG with 90% coverage and 0.2mm layer height.

14. Edible toys

The Open Toys project turns ordinary vegetables into toys. Source: Thingiverse

The project was originally envisioned as a way to turn commonly discarded residual materials such as wood and cork into toys: helicopters, planes, cars, and so on. But soon, wood and cork were replaced by more accessible and easily pierced materials: fruits and vegetables. With this project, you can turn ordinary food items into fun personalized toys.

15. Anti-stress keychain

Entertaining keychain. Source: Thingiverse

Add some flair to your keychain with this cool little toy. She will entertain you wherever you are!

This model is not the easiest, but try it and you will definitely succeed! Important print quality settings are "Outer Walls Before Inner Walls" and being extra careful with temperature. It is printed with supports and requires a certain, sometimes lengthy, post-processing. Remove not only supports, but also make sure that the surface of the part is smooth, otherwise it will cling and stutter. A scalpel or a 1 mm drill will do. Periodically rotate the gears to see where it still sticks, which is especially true when using PLA.

16. Chunky Trucks set

Two models from the fun and cute Chunky Trucks set. Source: Thingiverse

The adorable Chunky Trucks collection includes various unique models of small trucks, fun builders and even a movable barrier. The cars are specially designed so that even the smallest children can play with them. Unlike builders, who are not recommended to be printed for toddlers so that they do not try to put them in their mouths, but which will greatly amuse older children.

All models can be printed without supports. And for long truck life, at least 25% infill and three-wall use are recommended.

17. Rattleswords

Arm your warrior! Source: Thingiverse

Rattles are an integral part of all babies. But what if we move away from banal and boring designs and build a rattle in the form of a sword for your little warrior? This fun design will not only amuse your baby, but also you, as this rattle will be a lot of fun to print!

All corners of the model are rounded for safety. There are also two versions of the tip. Initially, a gem was attached to the tip, but after some concern that the stone could slip off the tip and be swallowed by a child, a second version was created that did not include a gem.

Print two sets of dots first. Then, while printing the sword, throw them inside the blade. This will ensure that the peas stay inside the rattle forever. After printing all the elements, simply fasten them with superglue.

As with any printed toy, parental guidance is required. Be sure to throw away the toy if it breaks.

18. Viking Squigglepeeps

Three Viking Squigglepeeps set sail. Source: Thingiverse

Squigglepeeps is another kid-safe toy, this time with absolutely no glue required. These fun chubby Vikings and their boat are too big to choke on, making them suitable for kids of all ages. They look funny even in one color, but they will be even more beautiful if you paint them with child-safe paints! The model also absolutely does not require supports.

19. Math Spinner

A great way to have fun learning math! Source: 3Dtoday

This math spinner is the perfect companion for learning math. Moreover, it is suitable for all ages, because it is never too late to brush up on your arithmetic knowledge! You can print this finished model or modify it for yourself by removing or adding rings. This advanced design contains all the signs of addition, subtraction, multiplication, division, equality and inequality, as well as a pointer to the string to be solved! On the central insert there are special grooves for fixing. For this version, you will need to print 2 caps and 8 rings of numbers, the rest of the details are printed in a single copy.

Recommended coverage 25% and layer height 0.2 mm.

20. Jumping turtles

The variety of these turtles is amazing! Source: Thingiverse

Last but not least, jumping turtles! Agree, even the name sounds fun! And a variety of shell designs will give each turtle its own uniqueness. This model uses the same flex concept as the Mini Monster Truck above, making the Turtles bounce when you tap on the body. Also in this turtle, the head can be drawn into the shell.

The model is assembled with printed H-clamps and does not require glue. All parts are printed without supports. Also note that using the raft (rafts) and brim (margins) options can have a negative effect on the results if you don't then take the time to sand and clean the edges at the base.

If you are having problems with head slip, you can try printing 1 of the 3 narrower shaft head files that the author uploaded specifically for this case.


We hope you enjoyed this selection of toys for 3D printing, and you will definitely choose one for yourself, because 3D printing of toys is not only fun and interesting, it is also a new experience and knowledge for both you and and for the child. But we have considered only some entertaining options from the many existing ones.

Learn more