3D printed ps3 controller


▷ ps3 controller stand 3d models 【 STLFinder 】

PS3 Controller Stand/Cradle

thingiverse

Stand for a PS3 controller. Printed with 1.75mm high temp ABS at 25% fill. Two base options. Original extends about 15mm beyond the edge of the controller. Narrow is about 10mm within the edge. ...I prefer the narrow.

PS3 controller stand

thingiverse

Based on PS3 Controller Under Desk / Table Hook by charlesjcarr, this hook allows keep the ps3 control under the shelf without connecting the USB cable to stay safe

Hanging PS3 Controller Stand

thingiverse

I wanted an under the shelf PS3 controller holder, but found ShaoPellini's design had slight gaps on my PS3 controllers that left a slight wobble. The hole allows for the charging cable, and I've found if I stick the charging cable through both...

Shorter Arm for PS3 Controller Stand/Cradle

thingiverse

I wanted to have a shorter arm for the Controller/Cradle, since i put my controllers in front of the tv, and the original base+controller covered part of the screen. This arm is 20mm shorter. ... Dual Base coming soon.

Playstation PS3/4 Controller Stand Minimal

thingiverse

I have a YouTube Channel with new 3D printing videos out every week check it out at http://www. YouTube.com/onlylittlemike I wanted to create a bracket that was quick to print as low resolution and held my controller well. So here is the design! If...

Controller Stand PS3

thingiverse

Scalable stand for multiple controllers (PS3). With a slight modification, you may could also mount oder gamepads. As you see in the picture, my printer had a little bit an issue with the top layer. ...It's now fixed but I didn't print it again ;)

Controller Stand (PS3,PS4,PS5)

prusaprinters

Controller Stand (PS3,PS4,PS5) 2 parts (Easy assembly) Snap fit Print instructionsController Stand (PS3,PS4,PS5) 2 parts (Easy assembly) Snap fit

Modular Controller Stand Remix - PS3

thingiverse

This is a version of the modular controller stand designed for PS3 controllers. ...This mount also works for PS2 and PS1 controllers, so I have added files where the text is changed accordingly.

ps3 controller with shisha tube stand

thingiverse

This is a ps3 controller that allows you to smoke shisha while you are playing, this may allow you to combine your way of having fun with your shisha. Be sure to have some kind of gopro screw or similar in order to allow you adjust the hook to have...

T REX PS3 Stand

thingiverse

Borrowed a PS3 stand from thingivese library and came up with this pretty cool ps3 SLIM stand! ...Scale to 170% if not the slim PS3 version and it should fit

PS3 Stand Hollow Remix

thingiverse

Remix du Stand PS3 de 3dityourself évidé pour économie et rapidité d'impression

PS3 Slim Vertical Stand

thingiverse

Supports All PS3 Slim CECH-20XX CECH-21XX CECH-25XX CECH-30XX Does Not Support 'Super Slim' CECH-4XXX Inspired by PlayStation2 Slim Stand by xenomachina

PS3 Stand (Micro)

thingiverse

A simplified remix of 3dityourself's PS3 stand that is split in half for printing on smaller printers. Will print two at once. ... Instructions Simply glue each pair together at the thin end.

game ps4/ps3 stand

thingiverse

support pour 5 boite de jeux PS4 ou PS3

Vertical stand PS3 superslim

thingiverse

... Peg need a lot of sanding to go in plase. ... I needed a stand to put the console on the floor. Peg is not really necessary, it just helps the console not spin. Fastened with a M3 screw to the standard mounting hole on ps3 printed with 0.2 layer height

PS3 WebCam Stand

prusaprinters

PS3 WebCam Stand. Perfect height to place directly in front of your MK2 or MK3. ... Initially the stand was for mounting on custom enclosure (hence the screw holes on the top) Created a free-standing version for use on non-enclosed printers. View...

stand for PS3 joystick

youmagine

I designed this in Rhino based on dimensions I measured off of my PS3 joystick. ...it doesn't require a support structure to be printed.

PS3 Flat top Stand

thingiverse

Needed to place my ps2 slim above my ps3 slim, tried to make my own, kinda worked but it didn't look good, dug a bit more and found this one, but it had WAY too much detail, so I dumbed it down and made a couple cool versions, I personally printed. ..

Triple stack PS3 Stand

thingiverse

triple stack version of the stand

PS3 Superslim Vertical Stand

thingiverse

Wanted a vertical stand for my SS. None existed. Made one. The Maker Way. -- If you like the design and want to support my work, throw me some crypto currency! ... Bitcoin: 3QfkyjF3Z7KJcHvyb34GgPY8qAhSD3i31f Bitcoin Cash:...

PS3 Superslim Vertical Stand

prusaprinters

Wanted a vertical stand for my SS. None existed. Made one. ...The Maker Way.</p> <p>--</p> <p>If you like the design and want to support my work, throw me some crypto currency!</p> <p>Bitcoin: 3QfkyjF3Z7KJcHvyb34GgPY8qAhSD3i31f<br/> Bitcoin Cash:...

PS3 controller lock

thingiverse

PS3 controller lock

Support PS3 controller

thingiverse

Support for PS3 controller

PS3 Controller Charging dock

thingiverse

PS3 Controller Charging dock For 3 Controllers

Controller Profiles for Modular Controller Stand (PS3, Switch Joycon Grip, OUYA, NES, SN30)

thingiverse

I also have created an improved version that supports heavier loads, which you can check out here: [Counterbalance Base](https://www. thingiverse.com/thing:4659227) Available Modules - PS3 Controller - Switch Joycon Grip Controller - OUYA Controller...

PS3 Controller Holder

cults3d

Easy to print holder for two PS3 controllers.

PS3 Game controller holder

pinshape

Holder for ps3 game controller and smart phone 

One handed PS3 controller

myminifactory

... can be easily attached to any standard PS3 controller. These designs allow users who are handicapped or disabled to use a standard PS3 controller with very little effort or modifaction. ...This method is also very cheap and quick to put into place!

ps3 controller wall mount

thingiverse

A Ps3 controller holder. Don't fit as good than my Ps4 version but is ok. ...Print Settings Printer Brand: RepRap Printer: ...

PS3 Controller Holder

thingiverse

I needed a holder for the PS3 controllers I bought for the grandkids. I wanted something light and small. Decided to design one. ...This prints best on its side with supports and raft.

PS3 Controller Stand Custom 3D Print Playstation 3 2 1 Mount

Etsy is no longer supporting older versions of your web browser in order to ensure that user data remains secure. Please update to the latest version.

Take full advantage of our site features by enabling JavaScript.

  • Click to zoom

2,288 sales |

5 out of 5 stars

from €13. 00

Loading

VAT included (where applicable), plus shipping

Finish

Select a finish 1 Black Stand (€13.00) 2 Black Stands (€18.94)

Please select a finish

Quantity

1234567

Other people want this. 3 people have this in their carts right now.

Listed on Nov 24, 2022

48 favorites

Report this item to Etsy

Choose a reason…There’s a problem with my orderIt uses my intellectual property without permissionI don’t think it meets Etsy’s policiesChoose a reason…

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…

not handmade

not vintage (20+ years)

not craft supplies

prohibited or that use prohibited materials

not properly labeled as mature content

Please choose a reason

Tell us more about how this item violates our policies. Tell us more about how this item violates our policies.

Best 3D printer files Gamepad・Cults

Stand for XBOX S/X series controllers ver. 2

1.63 €

GAMEPAD

0.74 €

** FOR GAMERS ** JOYSTICK HOLDER

2 €

Xiaomi Gamepad Desktop Stand

Free

Stand for headset holder

2 €

Stackable stand for controller

3.60 €

iPega 9023 USB C Gamepad Adapter Right Angle 90 Degree L Shape

Free

Gamepad assembly stand

Free

Button Box Pro - Arduino

2. 99 €

Keychain for SNES controller

0,96 €

Gamepad - Joystick - PS4 - DS4 - Replica

3.49 €

Mate Joystick Gamepad PS4 - DS4

2.91 €

JOSTICK GAMEPAD SET

0,96 €

FJ_0063

5.67 €

Macetero Gamepad

1.91 €

Enclosure Arduino nano

0.99 €

Indicator switch V2 for training equipment

4.99 €

Grip for Nintendo Switch Joy-Con with Game Card Organizer

2.46 €

Retro arcade joystick NES

1. 63 €

Retro arcade joystick

1.63 €

Mini arcade joystick

1.63 €

Commmodore, Atari, Amiga 9 pin game controller DIY

1 €

PUBG Universal Mobile Gamepad, COD

2.88 €

Controller Stand - DualSense, PS5

1.22 €

Elden Ring controller holder for PS5

1 €

x 4 retro gamepads - Playstation, Xbox, Nintendo - Joysticks

2.12 €

Retro gamepad

3.49 €

Analog stick extensions for gamepad thumb

1,20 €

Keychain gamepad Playstation 1

0,50 €

Retarder model V2-trainer

7. 99 €

Button Box Pro V2 - Arduino

2.99 €

Holder for gamepad and headset

2 €

Playstation button symbols

1 €

Cookie cutters for Nintendo Switch

3.84 €

Scuf PS4 Gamepad Joystick

Free

Cutter Jostick Gamepad PS4

0.58 €

Joystick DUALSHOCK

€15.37

PS5 controller holder

0.60 €

PS3 / PS2 Controller - 1/12 scale

0.52 €

Max7219 Holder

0,99 €

Sim Racing Gear Indicator - Simulator

0. 99 €

Button Box Pro - Arduino

€4.99

Cstick to analog stick converter for gamecube controller

Free

XBox One controller wheel - full use of buttons

3.83 €

Cookie cutter - Gamepad

1.02 €

iPhone 12 Pro Max Gaming Case

2.50 €

MOBILE GAMEPAD

1,25 €

ButtonBox

Free

Gearlab GLB251309 3D Printing Material Polylactide (PLA) Dark Blue 1 kg Consumable for Gearlab 3D Printer or 3D Pen

Best-seller

Code:
31163557