3D print inspiration


51 Cool Things to 3D Print (2022) – Clever Creations

Image: Marvin via PrusaPrinters

Our site is reader-supported. When you buy via the affiliate links on this site, we will receive a commission at no cost to you. All opinions remain our own. Learn more

One of the struggles of owning a 3D printer is deciding what cool prints to make next. With so many 3D model sharing websites, there are endless 3D print ideas to try.

In this article, we’ll give you our top picks for the coolest 3D printer projects and show you where you can find the models you need.

Top 3D Printing Projects and Ideas in 2022

Elastic Football

This two-player elastic football game uses rubber bands to make the player pieces flexible in order to manipulate the small ball across the printed field. The sides of the playing field have an abacus-style point counter for both players and a lever to control the goalie piece on the back.

  • Designed by: Wilko_SLO
  • Where to get: PrusaPrinters

Mechanical Wall Clock

Clocks are fairly complex and cool in general, but 3D printed clocks like this one by Hairald are especially interesting to look at. This design is fully printed and does not use any electronics or batteries.

The mechanism uses a wind-up method with a hand crank and a hanging weight to move the gears using the force of the falling weight. You can watch a video of this particular clock in action here.

  • Designed by: Hairald
  • Where to get: PrusaPrinters

Squid Game - Front Man Mask

Can’t get enough of Netflix’s Squid Game? Neither could the designer of this front man mask. Print this model for an interesting decor piece to hang on the wall or use it to finish off your best cosplay outfit.

  • Designed by: r1nce
  • Where to get: PrusaPrinters

Articulating Raspberry Pi Camera Mount

While the best 3D printers come with a built-in camera option for creating time lapse videos and remotely monitoring prints, you can also add this functionality to any 3D printer that does not natively have it.

This articulated camera mount uses a Raspberry Pi controller to bring a fully flexible camera option for remote viewing, time lapse recording, or taking stills of your prints as they are in progress.

  • Designed by: Sneaks
  • Where to get: PrusaPrinters

Original Simpsons TV

Keep a little ode to the Simpson’s on your shelf or desk with this miniature recreation of the original TV set from the show.

This design uses a Raspberry Pi and other inexpensive components to create a working miniature television screen that plays videos on loop.

  • Designed by: buba447
  • Where to get: Thingiverse

Charger Cable Organizer

The only thing more annoying than an unorganized wad of chargers and cables is a tangled unorganized wad of chargers and cables. These printable organizers store your chargers when not in use, keeping them tidy and protected from other cords.

They work like small spools, letting you unwind the charger only as far as you need. When you’re done using the cable, you just twist the lid to wind the cord back up.

  • Designed by: DFV Tech
  • Where to get: PrusaPrinters

Screw Measuring Tool

Nothing slows you down more than a container full of mixed-together mystery screws and bolts. This screw measure tool is easy to print and has all the most common bolt and screw sizes to help you quickly identify the size and type of errant bolts, screws, or nuts.

  • Designed by: MattG
  • Where to get: PrusaPrinters

Rugged Desktop Organizer

Keep your desk tidy and your office supplies close at hand with this multipurpose desktop organizer. It has built-in slots for your USB sticks, SD and micro SD cards, and compartments for your pens, scissors, and any other tools you use on the regular.

  • Designed by: Byzantium3D
  • Where to get: Cults

Giroid Vase

Both functional and beautiful, this giroid vase is a fast and easy print project that doesn’t require any supports or serious post-processing work.

If you don’t intend to use it with water (such as when using silk flowers), it’s ready to use right off the build plate. However, if you plan to use it as a traditional vase, it is best to spray it with some sort of sealant to keep the water from leaking through the print layers.

  • Designed by: Area3D
  • Where to get: Thingiverse

Marble Maze

You’ll need to move the zen garden on your office desk, because this printed marble maze is the clear cure for office boredom. Fully printable (aside from the marble, of course) and easy to assemble, this design uses snap-together ball and socket joints on the parts to avoid glue or other adhesives.

  • Designed by: ericman314
  • Where to get: PrusaPrinters

Cute Caravan Birdhouse

Camping enthusiasts rejoice: now the wildlife can also enjoy the charm of a vintage camper with these cute caravan birdhouses. You’ll need to 3D print the two colors separately before gluing the 3D prints together for a cute two-toned effect. This build fits on most print bed sizes.

  • Designed by: PA1
  • Where to get: Cults

Drippy Bucket

Add a little pop art to your work or living space with the drippy bucket. Printed as three separate pieces, the handle and paint drips both snap onto the main bucket without glue or screws required. It’s the perfect container for pens, dice, or even loose change.

  • Designed by: davemoneysign
  • Where to get: PrusaPrinters

Fractal Vise

Not only is this fractal vise model extremely cool-looking, it is also an incredibly useful tool once fully assembled.

This project requires quite a bit of hardware, including multiple sizes of bolts and screws, as well as lengths of both smooth and threaded rods. Assembling the vise is also quite time-consuming, but the designer thankfully has a video tutorial outlining the whole process.

  • Designed by: TeachingTech
  • Where to get: Thingiverse

Squeeze Fan

This hand-powered squeeze fan is as useful as it is fun. Using the handle pushes the inner gears and turns the propellers. This design is perfect for camping trips, emergency kits, and other scenarios where power or batteries might be hard to come by.

  • Designed by: GeorgeZSL
  • Where to get: Thingiverse

Face Shield

With the pandemic still in full swing, personal protection equipment is as important as ever. This basic face shield was designed by the Prusa research team and gained EU certification as a viable personal protection tool.

Whether you are still looking for protective methods from COVID-19 or work in an industry that requires face shields, this model is fast and easy to print.

  • Designed by: Prusa Research
  • Where to get: PrusaPrinters

Lithophane Moon Lamp

This project uses a lithophane model that maps the actual surface topography of the moon to make a realistic miniature rendering of it. This version adds tripod legs and a hole on the bottom for a light to make it a functional, beautiful lamp.

  • Designed by: Frank Deschner
  • Where to get: PrusaPrinters

Landy Mini

If you think this is a basic miniature car model, think again. Assembled with only a handful of screws, the Landy Mini has a fully functioning suspension system.

Though it’s a bit time-consuming to print and assemble, the Landy Mini is a fun and well-designed project that would look great on a desk or shelf in your home or office.

  • Designed by: 3D Sets
  • Where to get: PrusaPrinters

Self-Watering Planter

Love plants but have a brown thumb? This self-watering planter slowly feeds in water from a reservoir as the soil dries. So even if you forget to water them for a few days (or weeks, let’s be honest), they’ll still get the care they need.

  • Designed by: Mikolas Zuza
  • Where to get: PrusaPrinters

Split-Flap Display

Based on the split-flap displays of the past, this model uses a handful of components and a wireless adapter to make a DIY digital split-flap display that connects to your network. You can program it to work as a clock, calendar, message board, or whatever else you can think of.

  • Designed by: David Kingsman
  • Where to get: PrusaPrinters

Cryptex

Inspired by the Da Vinci Code, this cryptex has a small compartment to hide things like candies, jewelry, or notes inside. You can program the cryptex to open for a specific series of letters, much like a combination lock.

While this is in no way a secure place to store anything valuable (it is printed from plastic, after all), it’s a funny way to keep coworkers out of your sweets, to give someone a gift, or to play a game with your kids.

Recommended:

The 8 Best 3D Printers for Kids

  • Designed by: Cees
  • Where to get: PrusaPrinters

Bag Clip

A stark improvement on the chip clips of old, this clip prints in place with minimal supports. It uses a three-hinge system, so it stays on the bag more securely without slipping off. If you want something that will be quick and easy to print, this is a great option.

  • Designed by: Andrei
  • Where to get: PrusaPrinters

Rotating Rings Toy

The mini gyroscope has remained one of the most popular fidget toys in the 3D printing community for several years, most likely due to its unique design. It prints in place and can be used right off the build plate.

  • Designed by: Marvin
  • Where to get: PrusaPrinters

Mantis Clamp

The mantis clamp is an interesting take on a vise design, using a hand crank and gears to tighten and loosen the clamp. As illustrated in the photo below, that makes it a handy device for holding up small things like electronics components, painting miniatures, and so on.

  • Designed by: zuberio
  • Where to get: PrusaPrinters

Deadpool Bust

This fine-detailed Deadpool bust is a great novelty item for any Marvel fan. Printing this model in 3D printer resin on a resin 3D printer maintains the model’s high level of detail, whereas using a metallic filament like CopperFill or BronzeFill on a fused deposition modeling (FDM) 3D printer will give it the appearance of a metal cast statue.

  • Designed by: Eastman
  • Where to get: PrusaPrinters

Avocado Seed Floater

Sprouting avocado seeds is a little more delicate than just dropping them in some potting soil and hoping for the best. They need to be partially submerged in water for several days for the pits to start growing a sprout. Luckily, this is easy to control with this 3D printed seed floater.

  • Designed by: Mikolas Zuza
  • Where to get: PrusaPrinters

Drill Depth Stop

When you need a specific stopping point for your drill bit, these printable drill depth stops are an easy and economical way to keep your drill from going too deeply into your material.

The model offers a variety of sizes that correspond with popular drill bit dimensions, so you should be able to find one that suits your needs regardless of which drill bit size you use.

  • Designed by: Highrise Workshop
  • Where to get: PrusaPrinters

Sunflower Clock

Unlike the other clock we shared in this list, this beautiful design is a fully functional wall clock with added electronic components. This clock has a lot of different pieces to print, thanks to the thin bands of PETG used for the petals. It takes some time to assemble, but the final look is worth the effort.

  • Designed by: Romano Rugeri
  • Where to get: PrusaPrinters

Cute Skull Lamp

We’d say these skull lamps are a perfect addition to your Halloween decor, but they’re so adorable that you’ll probably want to keep them up year-round. They are easy to print and only take an inexpensive strand of LED lights and a few batteries to assemble them.

  • Designed by: rayjizza
  • Where to get: PrusaPrinters

Ancient Guardian from Zelda BOTW

Any Nintendo gamers reading this will automatically know what these deceptively innocent-looking articulated robots are, and probably started sweating and hearing dramatic piano music the moment they spotted them.

But if you haven’t been totally traumatized yet by the ancient guardians during your BOTW playthrough, these models are a must-print item. The legs are fully articulated and print in place, so you can just pop the entire figure off the build plate and immediately start your campaign to bring down Hyrule.

  • Designed by: Crafty Sven
  • Where to get: PrusaPrinters

Ornamental Bulbasaur

If you haven’t gotten enough Bulbasaur from Bulbasaur planters, low-poly figurines, or Pokemon chess sets, you’re in luck. This ornamental Bulbasaur model is one in a set of three decorative Pokemon models that you can print for free.

Since the model uses a lot of Victorian filigree elements, it looks fantastic with a metallic finish, especially with a patina. They acquired that look in the photo below using paint, but metal-filled filaments or cold casting the model in resin are two other possibilities for making this model look its best.

  • Designed by: Psdwizzard
  • Where to get: Thingiverse

3D Printable Drone

For a functional mini-drone, this design works well and is a lot of fun to use. Designed around a battery case for a single lithium battery, it is not going to be very powerful. However, it does work and it is a good beginner project for those wanting to learn how to 3D print and build more capable drones.

  • Designed by: David Cledon
  • Where to get: Thingiverse

Back Loaded Horn Speaker

This little printed speaker transforms into a powerful Bluetooth speaker with a little assembly and about $20 in components. Even better, the designer includes a wiring diagram and full assembly instructions along with the free STL, so even if you are new to this type of project, you can easily follow along.

  • Designed by: guppyk
  • Where to get: Thingiverse

Among Us Crew/Body/Ghost/Imposter

This five-piece set of Among Us models is a fun project for fans of the game. With all of the character types in the game available, you can vary the colors of each model to account for any possible in-game combination.

  • Designed by: WalRit
  • Where to get: Thingiverse

Print-in-Place Bearings

If you need bearings for one of your projects or you just want to give your printer a nice torture test to check its calibration, these print-in-place bearings are the answer. Designed in five common sizes, these models should have all the options you need for most projects.

  • Designed by: guppyk
  • Where to get: Thingiverse

Helmet Hanger

Both functional and decorative, this 3D printing project is the perfect solution for storing your helmet while also showing it off. The model is easy to print and allows for printing the sphere whole with supports or in two pieces without supports (to glue together after).

  • Designed by: Sergi Lorenzo
  • Where to get: Thingiverse

Tensegrity Table

When regular furniture gets too boring, choose some that appears to defy physics instead. This small table ties the bottom and top parts together with string, and the tension keeps the table parts upright. While the designer used blue string, a clear string is ideal because it’s harder to see and makes the table really look like it’s floating.

  • Designed by: Austin Steingrube
  • Where to get: Thingiverse

Hydroponic Self-Watering Seeds Starter

Another model for the gardening-challenged, these cute self-watering planters will keep your plants watered and nourished even if you don’t. The planter comes in five different poses, with some sitting flat and others dangling their legs over a ledge, you can get really creative in staging your planter people on your desk, table, or shelf.

  • Designed by: Studio Aditivo
  • Where to get: PrusaPrinter

Print-in-Place Briefcase

Need a place to store your miniature work documents? What about your doll-sized stacks of money? This print-in-place briefcase does exactly what it says: it prints a miniature briefcase in one piece with fully functioning hinges and latches straight off the build plate.

This model (and other print-in-place projects) are a good way to test your printer’s calibration and to see where it’s having issues.

  • Designed by: Dehapro
  • Where to get: Cults

Bone Fingers

These articulated bone fingers bend with your fingers, making their movements look incredibly realistic. The project requires quite a bit of gluing and assembly after printing, but they are a stunning addition to cosplay outfits and Halloween costumes.

  • Designed by: Littletup
  • Where to get: Cults

Lazy Dogs

Yet another print-in-place project on the list. These adorable canines have articulated hinges in their body that gives them a wider range of flexibility. While they are mainly for decorative (or playful) purposes, these little dogs are quite popular with kids.

  • Designed by: Mcgybeer
  • Where to get: Cults

Hexagonal LED Panels

DIY printed light fixtures are one of the easiest ways to customize your decor, and these hexagonal LED panels are one of the best options we’ve seen.

Each hexagon light is printed and assembled separately before being fit together, which leaves plenty of room for creativity. Each light panel could have a different LED color, or work through a controller to loop through certain behaviors like blinking, twinkling, or transitioning through the RGB spectrum.

  • Designed by: Jim Misel
  • Where to get: Thingiverse

Mechanical Quick Grab/Release Phone Stand

This phone stand tightens around the phone when it’s placed in the cradle and loosens when the phone is lifted off. It also rotates the phone up, down, and side to side while it is in the holder for optimal viewing at any angle.

  • Designed by: Arron Mollet
  • Where to get: Thingiverse

Slim Credit Card Wallet

When you want the bare essentials to keep your pockets from being weighed down, a card wallet is an essential accessory. This particular one is fully printed and comes with the added bonus of an ejector button to help you easily remove your cards when you need them.

  • Designed by: Aljaz Titoric
  • Where to get: Thingiverse

Measuring Cube

A modern take on the old concept of measuring cups, these cubes are a fun way to incorporate the different measurement sizes into one piece. However, we don’t recommend using them for liquids in the kitchen since the small gaps between layers in 3D prints are not watertight.

  • Designed by: Matt Stengler
  • Where to get: Thingiverse

Thor Hammer

One of the more iconic Marvel props in the 3D printing community, Thor’s hammer is easy to print and looks great on display. While it has a lot of fine details that would be best captured with a resin 3D printer, it will be challenging to print it at full scale on most consumer resin printers.

  • Designed by: Rob Pauza
  • Where to get: MyMiniFactory

CNC Machine

One of the best things about having a 3D printer is the ability to use it to produce additional printers or machines. This CNC machine is a perfect example of that. It uses 3D printed joints to assemble the rails, motors, and carving tool into a fully functional CNC.

  • Designed by: Creative Think
  • Where to get: Thingiverse

Raspberry Pi 4 Case

In case you missed it, this list is full of projects and ideas that use Raspberry Pi boards as the controller. Being small, cheap, and surprisingly flexible in its capabilities, the Pi lends itself extremely well to 3D printing.

With that in mind, it’s no surprise that you can find dozens of models for Raspberry Pi cases on most of the project sharing websites. This one has one of the more attractive and functional designs available.

  • Designed by: Carter
  • Where to get: PrusaPrinters

Prusa Enclosure

Enclosures are often a necessity for printing ABS and other high-temperature filaments successfully, but DIY and budget printers rarely have them incorporated into their design. Fully enclosed 3D printers do exist, but they come at a price. Thankfully, enclosures are not overly difficult to make yourself, especially when upcycling existing furniture like this build.

This project gives you all the pieces needed to turn an IKEA Lack table into a functional 3D printing enclosure and filament station. While it is specifically designed for Prusa 3D printers, any printer that fits on a Lack table should work with this project.

Recommended:

9 Amazing DIY 3D Printer Enclosure Ideas

  • Designed by: Ondřej Stříteský
  • Where to get: PrusaPrinters

Fidget Infinity Cube

While fidget toys are always a popular category for 3D printing, these fidget cubes are especially interesting. Using a hinge design, you can fold and unfold the cubes in multiple directions.

This model prints flat and requires no assembly after printing. Since the hinges print in place, this project may take some experimentation with printer settings and calibration before it is printed successfully. The designer includes a test print with the model files so you can quickly try out different print settings without printing the full model.

  • Designed by: Austin Vojta
  • Where to get: PrusaPrinters

Addams Family Thing

Yet another spooky prop on the list, the Thing from the Addams Family is a great item to add to your Halloween decor. This is a model with a high level of detail (especially around the knuckles and nail beds) that would do well with resin printing.

Recommended:

Resin vs Filament 3D Printers: What’s the Difference?

  • Designed by: Js-studio
  • Where to get: PrusaPrinters

Collapsible Basket

Our final pick for print-in-place designs, the collapsible basket is fun to print, cool to use, and easy to put in storage when you don’t need it.

  • Designed by: 3D Printing World
  • Where to get: PrusaPrinters

Conclusion

Those were 51 of the coolest free 3D printing models! Did you like our picks? Have you printed any of these models before? Let us know in the comment section down below!

Scroll to Top

67 Cool Things to 3D Print

3D printing is such a fun way to produce creative work—and it has totally taken off. Now, creators are using this amazing new technology to create all kinds of wild and wonderful 3D printer projects that were previously all but impossible to make at home.

These 3D printer projects are a great addition to your online design portfolio. This is such a hot space that shows your mastery of this chic craft could win you some big new clients. You can showcase a collection of cool things to 3D print and some of your best 3D printings too.

Want to get in on this cool 3D prints trend? We’ve compiled a list of 67 inspiring 3D printing ideas to fuel your next 3D printer design. So, what can you make with a 3D printer? Well, there’s something cool for everyone!

Next in our list of cool things to 3D print is a simple project that can be completed in approximately one hour and will produce a whistle. It can produce an eye-popping 118db sound, perfect for camping or sporting events.

If there’s one thing we can all agree on, it’s that earbud cords are a pain in the butt to keep organized. They constantly get tangled and eventually produce the dreaded earphone-crackle, rendering your treasured music-makers useless. This is a great example of what you can make with a 3D printer that can improve your everyday life.

A simple toy originally created for Settlers of Catan, this project is durable and (in our opinion) cute. This is one of those 3D printer projects you could use in a few ways: gaming, office desk decoration, children’s toy, you name it! Plus, T-Rexes are (always!) cool.

Organize your desk, and add a little flair at the same time! With these simple 3D printer designs, you’ll have all you need to generate truly unique desktop organizers that not only keep your stuff where it needs to be but look cool as well. You can 3D print a pencil holder that is unique to your own personality and have others mistaking your pencil holders again.

With a 3D printer you’ll be able to replace your dinnerware with new and original 3D printer designs in no time at all. Take this blueberry-themed bowl, for example. Why stop there? There are numerous other designs for plates and bowls out there to make eating at home a unique experience.

One of the cool things to 3D print is an abstract planter for your succulents and cacti. Why use traditional planters to hold your plants? There are cool 3D prints out there that don’t allow you to skip the traditional clay pots. These modular little guys are modern and fresh and guaranteed to make your mini-garden more attractive.

Get rid of those 72 measuring spoons from your utensil drawer and replace them all with a single implement! One of the most immediately useful and cool 3D prints in this list, it’ll make for an interesting tool that others will want when they see it.

Stop the tyranny of cords taking over your desk and entertainment unit and 3D print some space-saving cable management devices. You’ll cut back on desk clutter and all that cord-related aggravation. These are the blessed 3D printed objects that make life a little less annoying!

Nearly everyone these days has a smartphone, and we’ve likely all had moments where we wanted to prop up our phones for viewing video or photos and had to resort to piled books or whatever else is on hand. And it rarely works out as well as we hope! That makes this tiny project one of the coolest 3D printed objects on the list. Plus, they look like cats. Cats are good.

A perennial childhood favorite, kids love them just as much today. Of course, adults can enjoy these toys, too. They could be just the ticket to break through some creative block!

A truly inspiring 3D printing idea, these pop-out business cards allow you to speak to clients in a way they won’t have experienced many times (if ever) before! Rather than a drab piece of cardboard, hand them a toy they can assemble that speaks much louder than a traditional printed card.

Can’t sit still? Searching for a 3D printer project to help you focus? Look no further. Fidget spinners are an excellent way to occupy your mind, and this 3D printed object will definitely do the trick.

This is probably one of the most fun and cool things to 3D print, these gimmicky little toys are quite literally affixed to food items found in your house. A lemon helicopter? A banana-car? Why not! Easy to print and awesome for providing hours of enjoyment to restless rainy-day kiddos.

Definitely among the most interesting and cool things to 3D print in this list (and showcasing a bit more complexity than other entries), the dragonfly is a tiny little flying machine you can whip up in a short time. It’s perfect for providing a little entertainment for your kids on a rainy day.

Why settle for boring cutlery in your drawer? With minimal effort, you can produce some decorative handles for your eating utensils and wow visitors to your humble abode. When they inevitably ask “so, what can you print with a 3D printer?”, you can tell them they’re eating with it!

Drop your phone into these useful little devices to amplify the sound from its speakers. They offer surprisingly high-quality sound—and now you don’t need to lug portable speakers around on picnics or at the beach.

If you’re looking for some more simple and cool 3D printing ideas, consider 3D printing a set of drink coasters. Thanks to simple 3D printer designs like this, we won’t need to spend our hard-earned cash on flimsy little discs anymore. Make your own coasters with whatever designs you want, and say goodbye to tacky freebies and over-priced novelty ones. This idea makes for one of the cool things to 3D print as gifts!

If you’re an audiophile, you’ll truly appreciate this entry as one of the best things to 3d print. By converting audio files, you can create your own records that will play on turntables. Why limit it to music? Record your own special messages to loved ones and send out the love!

Simple 3D printer designs like this are great to have on hand. Hinges are always useful, and come in handy all over the house. These particular designs are super-simple, even by 3D printing standards, requiring just a single step!

With a sliding clasp, these unique chip clip designs work quite well and are fantastically simple things to 3D print.

A larger-scale project than other 3D printing ideas, the Drawing Machine is quite unique: attach a pen and create works of art from files on your computer. This 3D printer project can help you produce invitations, cards or any other manner of drawings.

Some nostalgic old-timey engineering comes into play with these uber-neat 3D printing ideas. Relive the past and have your desk decorated with a sign that uses something other than LED or LCD displays!

When it comes to 3D printing metal, there are people who may choose to use a laser cutter instead. The reason is that 3D printed projects using metal can be costly and time-consuming. However, the two are quite different. 3D printing is an additive process, while laser cutting is a subtractive process. Depending on your needs, those that are looking to create multiple pieces at a quicker pace may choose the laser cutter as it can conveniently cut multiple materials and larger size.

With digital trends of raw and rustic design, you might be considering 3D printing cool things at home with metal. However, printing metal is extremely costly due to its process and the machinery required. If you’re looking for cool things to 3D print at home with a metal-looking finish, we recommend using materials on the market that can create metal-like 3D printed objects instead. These materials give the illusion that your 3D printed pencil holder or camera mount is made out of metal but without the actual cost.

Thanks to 3D printing, it has also made highly-customizable prosthesis possible. One of the coolest things about 3D printed prosthesis is that they can create custom fits for the patient and also a much lower cost. Instead of creating static designs that are “one size fits all”, 3D print gives companies the opportunity to create products that are affordable and personalized. What would have cost lots of money to create is now more accessible thanks to 3D printed prostheses.

Beyond science, 3D printed homes and shelters have also become one of the cool things to 3D print across the world. To address the housing issue around the world, companies have been using this technology to print emergency shelters and 3D printed homes. With this technology, companies and cities can build a community in a much shorter amount of time and for a cost cheaper than traditional home building methods. Each home inside the community can then be purchased at a more affordable cost.

If you love architecture and buildings, companies have created kits that allow people to replicate architectural structures and other cool things with a 3D pen. For boardgame lovers, you 3D print your own figurines by drawing it with your 3D pen. You can also turn your favorite cartoon show characters or movie heroes into 3D. While a 3D pen allows you to draw 2D things to 3D, their limitation tends to be the size of the project you can make. If you’re looking to 3D print a life-size chair, it may be easier to use a printer because 3D pens may not be able to create something as durable.

  • Tangram: A super easy and fun game to play with your kids or friends. If you’re going on a road trip or simply trying to pass time, this 3D printed tangram makes for portable entertainment.
  • Klöts (Quick shoe ties): Some cool things to 3D print for your kids are these quick shoe ties. With this project, you’ll spend less time worrying about their shoelaces being undone and risking a fall.
  • Puzzle Keychain: This heart puzzle is perfect as a gift or personal use. If you’re tight on schedule for an anniversary or valentine’s day gift, this heart puzzle is one of the quickest things to 3D print.
  • Door Stop: Some things to 3D print for practical uses are these door stops. Whether you’re using it at home or for your office, printing them is super easy and fast.
  • Light Switch Locks: This definitely tops for cool things to 3D print, especially for parents. This awesome tool can prevent your kids from turning the lights on and off at home. Keep certain lights off to save energy.

Ready to build a design portfolio website that captures clients’ attention? From gorgeous themes to a built-in proofing tool, we’ve got designers covered. Start your free trial with Format today!

Now get out there, get creative, and start turning heads with amazing 3D creations!

Need some more design project inspiration?
How to Start a Creative Project by ADAMJK
5 Ways to Fund Your Personal Project
10 Steps to Building Your Perfect Online Portfolio

Blog qbed | 3D modeling, additive manufacturing, inspiration - qbed

How does annealing affect the properties of PLA, PETG, ABS and ASA plastics? Finding the optimal annealing temperature

What does annealing 3D printouts do? To what extent do the characteristics of plastics improve after annealing? How to choose the optimal annealing temperature?

Read More

3D printing materialsK. Comments

How to bake PLA plastic in the oven?

What is plastic annealing? How to bake PLA printouts at home? What annealing temperature to choose? And what printouts should be annealed?

Read More

3D printing supplies, DIYK. Comment

Retopology in ZBrush: how to create the right topology with ZRemesher?

A complete guide to model retopology with ZRemesher.

Read More

3D Software, 3D Modeling, ZBrushK. Comments

Jewelry Rendering: How to Prepare a Rhinoceros 3D Model for Rendering

How do I prepare a decoration modeled in Rhinoceros 3D for photorealistic rendering in Keyshot and other programs?

Read More

3D Software, 3D Modeling, Rhino 3DK. Comments

Jewelry rendering in Keyshot

A step-by-step guide to rendering jewelry. We analyze all the parameters that affect the quality of the rendering of jewelry in Keyshot.

Read More

3D Software, Keyshot, RenderingK. Comments

TINKERCAD training for dummies. Part 3. Create a panda

Tinkercad Practice: Designing a Cute Panda on Bamboo!

Read More

3D Software, 3D Modeling, TinkercadK. Comment

TINKERCAD training for dummies. Part 2

Description of all Tinkercad tools and working with shapes. Export models for Minecraft.

Read More

3D Software, 3D Modeling, TinkercadK. Comment

TINKERCAD training for dummies. Part 1

Description of all the main functions and menus of Tinkercad, as well as an introduction to navigation.

Read More

3D Software, 3D Modeling, TinkercadK. Comments

Exhibition 3D PRINT EXPO 2018 in Moscow, or where to get high for an additive worker in the fall

What interesting things can be seen at the exhibition of 3D printing technologies, where to get a free 3D printer and what do 3D printers have in common with the birth of the Universe?

Read More

EventsK. Comment

XYZ Prusa i3 MK3 Calibration Issues: Causes and Solutions

What should I do if the printer gives an error during calibration? How to test the correct operation of the P.I.N.D.A. and reflash the Prusa printer?

Read More

3D Printers, MiscellaneousK. Comment

3D Printing Plastics: Comparing PLA, ABS, PET/PETG, HIPS, PP, ASA, nGen, PC-ABS, Flex, Nylon and Composites

What material should I choose for my printout and what should I pay attention to when printing?

Read More

3D printing materialsK. Comment

How to Create a Litophane: 3D Print Your Photos!

Detailed instructions for 3D printing of lithophanes.

Read More

DIYK. Comments

Creating a Russian-language site on Squarespace: Review of the constructor

What should you know before creating a Russian site on Squarespace?

Read More

Reviews, MiscellaneousK. Comments

ZBrush Core Basics

ZBrush Core for beginners: features, tools, hotkeys.

Read More

3D Software, 3D Modeling, ZBrush Core, ZBrushK. Comment

How to choose a desktop 3D printer?

What characteristics should I look for when buying a 3D printer for home/office?

Read More

3D PrintersK. Comment

Additive Manufacturing Technologies

What are 3D printers and how do they print?

Read More

Additive Manufacturing, 3D PrintersK. Comments

Additive manufacturing step by step

How is a 3D printout created?

Read More

Additive ManufacturingK. Comment

Additive manufacturing and mass customization

What is additive manufacturing and how does it affect our lives?

Read More

Additive ManufacturingK. Comment

GROHE Icon 3D - The embodiment of the impossible

CHOOSE A CATEGORY

THE IMPOSSIBLE IS IMPOSSIBLE: GROHE ICON 3D-PRINTED TAP

Try to imagine what a faucet could be that would challenge your idea of ​​what is possible. For example, a 3D printed faucet is a product of the latest technology. A faucet with the superior functionality you've come to expect from GROHE, yet delivered in a silhouette with a stunning, iconic design. A product that calls into question all the usual rules of design and production. A working 3D printed object with amazing precision, lightness and elegance in a modern style.

With Allure Brilliant Icon 3D and Atrio Icon 3D, the GROHE Icon 3D collection shows how the previously impossible becomes a progressive reality. Using 3D printing in metal, which is still in its infancy, GROHE designers and engineers are pushing the boundaries of how faucets are made. 3D printed GROHE Icon 3D faucets offer exciting prospects for the future of faucets.

Reinterpreting the Atrio and Allure Brilliant collections using the Icon 3D concept, GROHE takes industrial design and water enjoyment to the next level. Michael Siam, Vice President of Design at GROHE AG, says: “The GROHE team is convinced that it takes audacious vision to create something completely new. The question of possibility or impossibility depends only on the angle. With the GROHE Icon 3D, we are taking a completely new approach to the industrial design of the future. We overcome limitations with metal 3D printing, creating products that at first glance seem impossible. This production method allows mixers to be produced in small batches according to the wishes of the customers, with no limits for individual adaptation.

Thomas Fuhr, Chief Operating Officer of GROHE AG, adds: “In order to remain a pioneer in the industry and expand our leading technological position, our company invests heavily not only in research and development, but also in the development of innovative production processes in its own factories . With the help of 3D printing technology, we open a new era in the history of German manufacturing. We are focused on our core business and cover the entire value chain with faucets, which is our fundamental difference from our competitors. It is essential for us to maintain the proven GROHE quality and translate it into a 3D printed product. To accomplish this task, we have developed our own process, the secret of which lies in the unique formula of the granules used.

BREAKING THE LIMITS: WATER AS A SOURCE OF VISUAL EXPERIENCES

“Making the impossible starts with believing it is possible,” says GROHE Vice President Design Michael Seam, who led GROHE’s world-famous in-house design office to realize an unprecedented 3D printed faucet project. Given the challenge of applying the latest 3D metal printing technology to GROHE faucets, Seam instantly recognized the potential to create something radically different from any known faucet design.

The GROHE design team has completely reimagined the design of two of GROHE's most iconic and architecturally evocative faucets, the clean and simple Atrio and the diamond-cut Allure Brilliant. “We wanted to keep the original intent of these models and add some magic to it,” says Seam. Designers and engineers have worked tirelessly to minimize the design and 3D print a faucet so light that it would be astonishing to be able to function.

“In profile, this faucet is virtually identical to a regular faucet,” explains Seam. “Its unusual silhouette is only visible from a frontal angle. It is impossible to believe in its subtlety, it is impossible even to imagine how water can flow through it.”

It is this reaction of surprise and delight that is the desired effect of magic, to which Siem was striving. With this project, the GROHE team has redefined what is possible with faucets. “This is no longer evolution – this is revolution!” Siam says. With Icon 3D's radically different 3D printed faucets, the impossible has become a reality in an amazing way.

SYNTHESIS OF HIGH-END DIGITAL TECHNOLOGY AND WORKSHOP HANDMADE

GROHE's 3D printing process in metal allows almost any geometric shape to be realized and invites us to rethink materials science by reducing forms to their essence and using stainless steel as a raw material, which is superbly castable and comes to the fore in the finished product.


Learn more