(506) 2240-6804
Thermaltake 3d print
Thermaltake 3D Makers
Core P5
The All-In-One bracket is designed to offer 120mm or 140mm fan base cooling solution or AIO liquid cooling solution with extra 3.5"/2.5" storage device installation onto the Core P5.
LEARN MORE
Core P5
A base plate to insert into the base of the primary or the secondary 5.25" bay cage, in order to cover up the sliding connector.
LEARN MORE
Core P5
This little holder is designed to hold LED strips around and against the acrylic panel of Core P5, to provide an Illuminated effect on the Core P5.
LEARN MORE
Core P5
A dual 5.25" bay cage is designed to offer installtion for dual 5.25" bay accessories onto the Core P5. Note: This is the secondary part, where you can joint together with the primary part.
LEARN MORE
Core P5
A fan bracket is designed hook onto the metal pillar of Core P5 and to be compatible with 120mm and 140mm fan installtion.
LEARN MORE
Thailand
LEARN MORELike
Thailand
Battleship
LEARN MORE
Like
Netherlands
Tower X 2 mod
LEARN MORE
Like
Thailand
Level 20
LEARN MORE
Like
Philippines
I really enjoyed building with the Core P5, I named my project Wind Rave because of its open air design while the color scheme was something that the Raidens inspired me to use. While putting the case together for the first time its modular design really had me thinking that this kind of case might bring out the case modder in a person because of the extended freedom in building that it offers. Though not an expert in hard line tubing yet, I find it really easy to route tubes for my LCS that is kind of simplistic in approach.
It is so cool I would like to work with it again someday, maybe incorporate it in a table or something :)
LEARN MORE
Like
TT Talent 2019
Amelia TT Talent Entry
Unlisted TT
TechLin- 2019 Thermaltake Talent Casemod Season 1 Entry
TT Talent Gebby
Me & Case Modding - Thermaltake Case Mod Invitational - TT Talent 2019
TT Talent Entry
▷ thermaltake core p3 3d models 【 STLFinder 】
Thermaltake Core P3 - Black
grabcad
this is from one of the most popular computer partthe Thermaltake Core P3 - Noir
Thermaltake Core p3 PSU cover
thingiverse
I created a nice cover for the PSU cables for the Thermaltake Core P3.
Hope you like it.
...
Two M3 nuts with washers are used to mount it
Thermaltake Core P3/P5 Case Fan Parts
thingiverse
Thermaltake Core P3/P5 Case Fan Parts.
Thermaltake CORE P3 RADIATOR/FAN MOUNT
thingiverse
Rad mounts that hang on standoffs for Thermaltake core P3. ... Untested on Core P%
Thermaltake Core P3 360mm Radiator Clips
thingiverse
Hung a 3x120mm radiator between the standoffs of a Thermaltake Core P3 using these.
Thermaltake Core P3/P5/P8 Dual PC Mod
thingiverse
Motherboard, PSU, and HDD rack mount for Thermaltake Core P5 and possibly P8 and P3. ... Comment if you need any help with this
USB Hard disk slot mount for Thermaltake Core P3
thingiverse
USB Hard disk slot mount for the Thermaltake Core P3 case. Likely also compatible with the Core P1 and Core P5 cases. ... The mount holds the drive at a 27 degree angle to allow space for the USB3 cable when multiple mounts are stacked.
EKWB DCC pump mount for Thermaltake Core P3 case
prusaprinters
This is a mount to fit your EKWB DCC pump onto a Thermaltake core P3 case stock water bracket.
This goes between the pump and the stock case bracket to mount securely and look good. ...This uses the stock EKWB DCC pump screws and a set of fan screws to...
EKWB DCC pump mount for Thermaltake Core P3 case
thingiverse
This is a mount to fit your EKWB DCC pump onto a Thermaltake core P3 case stock water bracket. This goes between the pump and the stock case bracket to mount securely and look good. ...This uses the stock EKWB DCC pump screws and a set of fan screws to...
AIO Mount Bracket for Thermaltake Core P3 Case
thingiverse
Print four of these to create an AIO mount fitting the Core P3 case.
Accomodates any size AIO in a top-mount or side-mount position (don't bottom-mount AIOs!). ... Use a soldering iron to punch mounting holes as appropriate to your AIO model and...
Thermaltake Core P3 7" LCD Screen Mount (Fits P5)
thingiverse
7" LCD Screen Mount sized for Lebula 7" Screen (https://www.amazon.com/Lebula-Touchscreen-Raspberry-1024X600-Capacitive/dp/B07VNX4ZWY) for the Thermaltake Core Series Vertical PCIe Mount. I wanted to include a sensor panel on my Core P3 (may fit...
Thermaltake Core P3 X-flow 360mm Rad Bracket
thingiverse
This one should allow you to mount a 360mm X-flow radiator between two posts of your Thermaltake Core P3.
It should work on any side of the case you like, presuming the location you choose doesn't impinge on any existing parts.
A traditional...
Water cooling pump plate Swiftech MCP50X (Thermaltake Core P3)
thingiverse
The Thermaltake Core P3 case comes with a bracket for it's own branded pumps and kits, this was my quick solution to be able to mount a plate on the bracket that would also fit the Swiftech MCP50X perfectly so that it sat nicely in the case and you...
EKWB Quantum Kinetic Mount for Thermaltake Core P3
thingiverse
This is a mount to fit your EKWB Quantum Kinetic pump onto a Thermaltake core P3 case stock water bracket.
This goes between the pump and the stock case bracket to mount securely. This uses the stock EKWB screws to mount the pump to the mount, and X4...
Thermaltake Core P3 - mount for additional 360x120 Radiator
thingiverse
I love my Thermaltake Core P3 case but really wanted to do a dual radiator water loop. Thats why I designed this simple radiato side mount. I created this with a Bykski Radiator in mind but I think (!) that the mounting holes are universal for...
Hadphone Holder - Thermaltake Core P1 - P3 - P5
thingiverse
Just a Headphone holder for the Core series.
I made it by myself in lack of a ready one.
... There are versions with and without a cable holder.
Thermaltake Core P3 360mm Radiator/Fan Mount
prusaprinters
<p>A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm. </p><ul><li>For 360mm radiators just screw in place and then slide onto the poles of...
Thermaltake Core P3 Psu Cable Cover
prusaprinters
Thermaltake Core Case P3 Leg with Power Supply Cutout
prusaprinters
This leg for the Thermaltake Core Case P3 (https://www.
thermaltake.com/products/chassis.html?cat=190) has a cutout for the power supply.Remixed Fromhttps://3dmakers.thermaltake.com/dwgallery.aspx?s=170
120/140mm fan bracket for Thermaltake Core P3
thingiverse
Made a fan bracket to use an extra Noctua NF-A15 in the front of my case. The fan didn't fit on the design that Thermaltake has for this so I made my own! ...
Thermaltake Core P3 X-flow 360mm Rad Bracket Remix (double side)
thingiverse
Remix to add a 2nd radiator of 360mm (above and to the right).
- xflow360p3 is the original file.
... - xflow360p3 double is the "angle" file
- xflow360p3 double very small, the same but cut to fit on a 220x220 plate
- xflow360p3 piece is the piece...
Thermaltake Core P3 Water Cooling PC Gaming Low-poly 3D model
cgtrader
-High quality polygonal model, correctly scaled for an accurate representation of the original object. ...Support upto 4K
SSD Holder for Core P3 - Thermaltake. V2
thingiverse
SSD holder made for Core P3 Case.
Replacement Glass & Mounts for Core P3 Case (Thermaltake)
thingiverse
The Thermaltake Core P3 came with either tempered glass or plastic (like mine).
The replacement glass with drilled mounting holes appears to be out of production and unattainable. My glass store balked at drilling holes so close to the edges.
...
Core_P3_Fan_Hanger
myminifactory
Fan Hanger for rear of Core P3 Case
Core P3 Glass Support
myminifactory
Glass sopport for the Steel Rod that holds the Tempered Glass on the Core P3 TG Case Version 2 M3 uses M3 brass insert found on Amazon for use wioth M3 Thumbscrews M3 information: Thread Pitch: M3-0.5overall length (OAL) 3.85mmOD (top) 5.6mmOD...
TT Core P3 iPod Case
thingiverse
Кронштейн iPod Touch 4Gen для TT Core P3
Core P3 240mm radiator hanger
thingiverse
For Thermaltake Core P3 case.
Top mount 240 mm radiator hanger modeled around the Gigabyte RTX 2080TI water cooled AIO graphics card.
Fan spacing is 105 mm x 105 mm,120 mm fans - 15 mm between fans.
Work in progress...
...
Thermaltake P3 SSD Slot cover
thingiverse
this is a cable passthrough cover for the thermaltake P3 computer case. Used it to cover hole for SSD drives. ... No special printing instructions
Custom Thermaltake P3 Gpu Cover
thingiverse
Gpu Lower Cover for the Thermaltake P3 Case void in front og Gpu. Custom 16mm waterpipe pass-Thru and AMD 5700XT logo.
.. Feel free to edit and use..
Thanks
Created in TinkerCad...
...
Printed with .6mm Nozzle @ .380
Free 3D File Thermaltake Tower 900 Middle Partition・Object for Download and 3D Printing・Cults
Thermaltake Tower 900 custom center console with display
free
Thermaltake Tower 900 Fan 70mm Bottom Side Mount
Free
The best files for 3D printers in the Tools category
Parametric Sample Carrier
Free
Corkscrew (Print in Place)
Free
Flexbot Hexacopter V2.0 With FlexCam
Free
Engineers Hammer Holder 300g 028 I for screws or peg board
Free
3D Printed Pi Monitor Game Controller Mount
Free
Gear Clock
Free
Ear save mask
Free
PyBadge FeatherWing Snapfit Case
Free
Bestsellers in the Tools category
Fan air duct Sovol SV06 4020 - CFD optimized
3.
75 €
PRECISE DIAL INDICATOR 3D PRINT DIY
1,90 €
PET-Machine, make your own plastic bottle filament at home!
50 € -66% 17€
gb-22 mini
0,90 €
Cut-Man - PET bottle cutter with handle!
5 € -50% 2.50 €
Paint stand with scissors
5.19 €
Fire Hydrant Storage Container
1.88 €
Ender 3 Briss fang Gen2, red lizard, spider, nf crazy, dragonfly, etc.
1.73 €
Case for Chill Buddy lighter
0,93 €
HOT END DUCT 4020 OR 5015 FAN, ENDER 3 S1, S1 PRO, SPRITE, PROBE NO Y OFFSET, ABL ADAPTER BETA
€2.26 -15% 1.92 €
Armadillo Flex EZR
€1.67 -10% 1.50 €
Ratchet holders - magnetic - holders for tool box organization
2,67 €
SUPERBOX
1,50 €
Tool holder for 3D printer V3.0
1.03 €
Creality Sonic Pad Mount for Ender 3 S1
0,99 €
ENDER 3 S1/S1 PRO, PROFILE 2020 ALU, REEL HOLDER AND DEPORTED REEL
2,11 €
💖 Do you want to support Cults?
Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so supporting us in maintaining activities and creating future developments is very easy.
Here are 4 solutions available to everyone:
-
AD: Disable your AdBlock banner blocker and click on our banner ads.
-
affiliation: Shop online by following our affiliate links here Amazon.
-
DONATIONS: If you want, you can donate via Ko-Fi here 💜.
-
INVITE YOUR FRIENDS: Invite your friends, discover the platform and the great 3D files shared by the community!
Fans Thermaltake
Filter
$ 9
$ 146
Price: $8.6700 - $145.9000
- Manufacturer
-
-
Thermaltake
-
Available
| Guarantee | |||||||
| yes | 41. | 41.6 | 41.35 | - | 1 year | ||
| yes | 42. | 42.3 | 42.0 | - | 1 year | ||
| no | 8. | 8.59 | 8.51 | - | 1 year | ||
| no | 8. | 8.59 | 8.51 | - | 1 year | ||
| no | 137. | 136.1 | 134.8 | - | 1 year | ||
| no | 145. | 144.7 | 143.59 | - | 1 year | ||
| no | 138. | 136.9 | 135.86 | - | 1 year | ||
| no | 90. | 89.86 | 88.99 | - | 1 year | ||
| no | 64. | 63.5 | 63.11 | - | 1 year | ||
| no | 46. | 45.6 | 45.17 | - | 1 year | ||
| no | 18. | 18.08 | 17.96 | - | 1 year | ||
| no | 139. | 137.99 | 136.67 | - | 1 year | ||
| no | 29. | 29.2 | 29.02 | - | 1 year | ||
| no | 137. | 136.0 | 135.07 | - | 1 year | ||
| no | 129. | 128.1 | 127.2 | - | 1 year | ||
| no | 50. | 50.33 | 49.84 | - | 1 year | ||
| no | 46. | 45.9 | 45.53 | - | 1 year | ||
| no | 52. | 52.2 | 51.85 | - | 1 year | ||
| no | 52. | 52.2 | 51.84 | - | 1 year | ||
| no | 32. | 31.88 | 31.57 | - | 1 year | ||
| no | 43. | 42.9 | 42.59 | - | 1 year |
9 
6 
67 
67 
41 
9 
0 
72 
0 
04 
21 
32 
4 
0 
1 
81 
2 
6 
5 
19 
2 The ruble price of the goods is calculated at the rate of the Central Bank
To make the site even more convenient, we analyze user experience - we collect data.
