Home » Misc » Stratasys 3d scanner

Stratasys 3d scanner


Locations: North America, Latin America, Europe, & Asia Pacific

Stratasys Units

North American Subsidiary Headquarters

9600 West 76th Street Eden Prairie, MN 55344 United States

  • 1-800-801-6491 1-800-801-6491
  • 1-952-294-3900
  • Get Directions
SMACS

6855 Shady Oak Rd Eden Prairie, MN 55344 United States

  • Get Directions
Stratasys Direct Manufacturing Worldwide

28309 Ave Crocker Valencia, CA 91355 United States

  • +1 888-311-1017 +1 888-311-1017
  • +1 661-257-9311
  • Get Directions
Stratasys Direct Manufacturing

75 W Baseline Rd Ste 49 Gilbert, AZ 85233 United States

  • 1 888-311-1017 1 888-311-1017
  • 1 480-656-4093
  • Get Directions Get Directions
Stratasys Direct Manufacturing

3280 E Hemisphere Loop, Ste 120 Tucson, AZ 85706 United States

  • 1 888-311-1017 1 888-311-1017
  • 1 520-295-8955
  • Get Directions
Stratasys Direct Manufacturing

12250 Kirkham Rd Ste B Poway, CA 92064

  • 1-888-311-1017 1-888-311-1017
  • 1-661-257-9311
  • Get Directions
Stratasys Direct Manufacturing

27260 Haggerty Rd, Ste A-5 Farmington Hills, MI 48331

  • 1-888-311-1017 1-888-311-1017
  • 1 248-553-5099
  • Get Directions
Stratasys Direct Manufacturing

8081 Wallace Road Eden Prairie, MN 55344 United States

  • 1 888-311-1017 1 888-311-1017
  • 1 952-906-2765
  • Get Directions
Stratasys Direct Manufacturing

9715 Burnet Road Ste A500 Austin, TX 78758 United States

  • 1 888-311-1017 1 888-311-1017
  • 1 512-821-1266
  • Get Directions
Stratasys Direct Manufacturing

815 Kirkley Drive Belton, TX 76513 United States

  • 1 888-311-1017 1 888-311-1017
  • 1 254-298-0125
  • Get Directions

Subsidiaries and Affiliations

MakerBot Industries

1 MetroTech Center 21st Floor, Brooklyn, NY 11201

  • 1-347-334-6800 1-347-334-6800
  • Get Directions

Stratasys Units

Brazil

Rua Araguari, 817, 4o. andar, sala 46 Vila Uberabinha São Paulo, SP CEP: 04514-041

  • +55-11-2626-9229 +55-11-2626-9229
  • Get Directions
Mexico

Jaime Balmes 11 Int 502 Torre A Polanco, Miguel Hidalgo 11510 Estado de México.

  • 52-5580-4184 52-5580-4184
  • Get Directions

Stratasys Units

EMEA Regional Office

Airport Boulevard B 120 Rheinmünster 77836 Germany

  • +49-7229-7772-0 +49-7229-7772-0
  • +49-7229-7772-990
  • Get Directions

Stratasys Units

Japan

3F Sumitomo Fudosan Kayabacho Bldg., 1-16-3 Shinkawa, Chuo-ku, Tokyo. 104-0033 Japan

  • 03-5542-0042 03-5542-0042
  • 03-5566-6360
  • Get Directions
Japan

Matsushita IMP Building, 1-3-7 Shiromi, Cho-ku, Osaka City, Osaka Pref 540-6319 Japan

  • 81-6-6943-7090 81-6-6943-7090
  • 81-6-6943-7091
  • Get Directions
Korea

#601, 6F Sigma Tower, 349 Seongnam-daero (17-5 Jeongja-dong), Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea 13558

  • 82-2-2046-2200 82-2-2046-2200
  • 82-31-715-1225
Korea – Busan

#104, 13F, BIFC, 133, Jeonpo-daero, Nam-gu, Busan, Korea, 48400

India

Unit-958 , 09th Floor , JMD Megapolis, Sector-48 ,Sohna road, Gurugram-122018, Haryana , India

India - Pune

Regus Elegant Centres Pvt. Ltd, Unit 113, Ground Floor, Sky Vista, Next to Eminence IT Park, Airport Road, Viman Nagar, Pune – 411014

China - Shanghai

1 Floor，A3 Ninghui Plaza 718 Lingshi Road JingAn District Shanghai 200072 China

  • +86 21 3319 6068 +86 21 3319 6068
  • Get Directions
China - Shenzhen

Room D05, Level 17, Building C, Tianan International Building, South Ren Min Rd. Luohu District, Shenzhen 518000 P.R.China

  • 86-755-33955872 86-755-33955872
  • 86-755-33955724
  • Get Directions
Stratasys Direct Manufacturing

Level 15, Tower 2, Kerry Plaza No. 1 Zhong Xin SI Road Shenzhen 518048 China

  • 1-888-311-1017 1-888-311-1017
  • 1-254-298-0125
Asia Pacific

Unit 804A, Tower A, Manulife Financial Centre, 223 - 231 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong 九龍觀塘偉業街223-231號，宏利金融中心A座8樓804A.

  • 852-3944-8888 852-3944-8888
  • 852-2325-7978
  • Get Directions
Southern Asia and Pacific

1 Gateway Drive #07-01 Westgate Tower Singapore 608531

India

Ground Floor, Salarpuria Cambridge Mall, No. 9, Cambridge Road, Ulsoor, Bengaluru- 560008 India

Subsidiaries and Affiliations

Authorized Stratasys Direct Manufacturing Partner

Objective3D Pty Ltd 33-35 Yazaki Way Carrum Downs, 3201 Victoria, Australia

  • 03-9785-2333 03-9785-2333
  • 03-9785-2322

3D Scanners - Prototyping Solutions

A 3D scanner collects distance and surface information instead of or in addition to color information within its field of view. The “picture” produced describes the distance to a surface at each point resulting in the identification of the three-dimensional position of each point.

There are many uses for 3D scanning. 3D scanning allows you to ‘see’ designs at the conceptualization stage. Reverse engineering techniques (creating a 3D model or 2D drawings from scan data) enable engineers and designers to conceptualize design before producing the prototype or product. It also saves time in the design stage and speeds up the prototyping process by scaling physical objects and altering designs to meet different requirements. The number of prototype design cycles are reduced thanks to the scan data being captured from highly-accurate 3D measurements of the physical object. Maybe you aren’t looking to create, but rather replace a part on an object and wish to avoid multiple iterations, 3D scanning will help you get it right the first time. These are just a few examples of 3D scanning.

Prototype Solutions offers the incredibly easy to use Artec lineup of 3D Scanners.   First is the Artec Eva Lite, and the most popular handheld scanner, Artec Eva. These two 3D scanners are used for making high quality textureless 3D scans when scanning geometrically rich objects, such as the human body. The Eva Lite is the budget-friendly version of the bestselling white light Artec Eva 3D scanner and you can upgrade from the Eva Lite to the Eva at any time for only the price difference between the two scanners.

If you need to capture small objects or intricate details of large objects with unwavering accuracy and brilliant color alongside the ability to render complex geometry, sharp edges and thin ribs, then you need Artec Space Spider. This powerful scanner offers almost unlimited possibilities in areas such as reverse engineering, quality control, product design, and manufacturing. The Artec Space Spider was originally developed to spec for the International Space Station and features powerful temperature stabilization and high-grade electronics because its accuracy is not affected by fluctuations in environmental conditions.

The Artec Leo is the most mobile 3D scanner on the market. It is the first 3D scanner to offer on-board automatic processing, provide the most intuitive workflow and is as easy as taking a video. This unparalleled 3D scanner captures both expansive areas and fine detail from small mechanical parts to the human body. The 80 frames per second reconstruction rate make it the fastest professional handheld 3d scanner on the market. No need to connect to a computer or plug into the main power source, just hold the Artec Leo in one hand and walk around freely, unrestricted by wires or additional equipment.

We have a solution to your unique 3D scanning needs. Explore all our 3D scanners and contact us with questions or to request a quote.

3D printer J750! - new, full-color printer from Stratasys!

3D printer J750! – new!

Today, 3D printing technology is so powerful that it is used in almost every industry and, moreover, thanks to it, new possibilities have become available that we could not even think of before. At the same time, three-dimensional printing is at the origins of its path and we still have to discover a lot of amazing things, because with all the advantages of the technique, many of its possibilities are still limited.

3D printer J750! – new!

3D Printer J750! – new!

Technology features such as printing speed and accuracy, the size of the created products and the ability to use different materials are constantly being improved. For example, for a long time it has been a problem to create color models using a 3D printer, since the most used technique for full-color printing with gypsum for this purpose, with all its advantages, also has many disadvantages, such as insufficient detail and fragility of finished products, which, under the influence of water, have the property lose color. However, the latest development from Stratasys could forever deprive the world of additive manufacturing of this problem and completely change the view of 3D printing technology.

3D printer J750! – new!

“We are at the beginning of what will shake the world up.” With these words, the head of Stratasys, Joshua Kleiman, presented their new revolutionary invention - the J750 full-color 3D printer, which works with several materials at the same time to produce unique color samples. This unit reduces downtime associated with resin changes to a minimum with six cartridges for the most commonly used resins.

3D printer J750! – new!

When you explain the principle of 3D printing to a child, he imagines ready-made colored figures that do not need any additional processing and painting. And that's how the J750 functions. With it, any of your fantasies can become a reality. An incredible 3D printer combines something that usually requires several different operations.

Stratasys has already tried this idea in their previous designs and achieved considerable success in this - their early variations of the device, which allows the use of various materials for printing, worked first with two (Connex), and then with three (Connex3) polymers simultaneously. But the J750 3D printer has become a real discovery in this area - when using six materials in printing, it becomes possible to create more than 360,000 different color combinations, and when the amount of polymer used at a time is doubled, the capabilities of the device double.

3D printer J750! - new!

The printer works with Stratasys' existing line of media from translucent to fully opaque, rigid to flexible, and the company continues to expand its range of raw materials. In addition, the digital color management system allows you to create color combinations for every taste, fully consistent with the data of the 3D model. This feature is incredibly popular, as in many areas of production, the exact reproduction of the color gamut of the product is of key importance. In terms of versatility and unique range of materials, the J750 has no analogues in the world yet.

3D printer J750! – new!

A few words about the technical characteristics of the device.

  • Print area: 490x390x200 mm
  • Layer thickness: up to 14 microns
  • Compatible with operating systems: Windows 7, Windows 8.1
  • Network connection: LAN - TCP/IP
  • Dimensions: 1400x1260x1100 mm; 430 kg
  • Operating conditions: at a temperature of 18-25°C; relative air humidity 30-70%
  • Software: PolyJet Studio3D
  • Resolution X: 600 dpi, Y: 600 dpi, Z: 1800dpi

This product has been updated with existing software to minimize printing limitations. The advanced software has an intuitive user interface that makes the transition from 3D modeling to 3D printing as fast and easy as possible.


The J750 has the potential to completely change the course of additive manufacturing, which will also change its value. Thanks to the unique color printing technology, the main design decisions can be made immediately after the stage of creating a conceptual model of the designed sample. And without the cost of painting 3D printed products, the delivery time of finished products will be significantly reduced.

Learn more