(506) 2240-6804
Snitch 3d print
Snitch best 3D printing files・Cults
Golden Snitch - Harry Potter
€1.25
CHRISTMAS GOLDEN SNITCH
€1.50 -40% €0.90
Harry Potter Golden Snitch
€1.50
Mr. Hærry Tauren Pose 1
Free
Golden Snitch
€1
Golden Snitch - Harry Potter
Free
Golden Snitch | Harry Potter | Wall
€1.50
CUTTING GOLDEN SNITCH
€1.24
golden lamp
€3
Snitch Lamp
€8. 23
Harry Potter Keychains
Free
Golden Snitch
€0.89
Golden Snitch - Harry Potter
€0.68
Quidditch medal
€0.95
Echo dot 4 Alexa ( Harry Potter - Golden Snitch - boccino d'oro - Pomo de ouro)
€3
Harry's Snitch Bookmark
€1.50
Golden Snitch
€0.71
Mate Golden Snitch
Free
Hogwarts Keychain - Harry Potter
€1.20
Golden Snitch
€0.61
ECHO DOT 4 ( HARRY POTTER GOLDEN SNITCH) (POMO DE OURO HARRY POTTER)
€6. -20% €5.08
35
Golden Snitch Keychain
€0.55
harry potter snitch key chain
€0.50
Harry Potter Chibi Cutter Set x6
€0.55
Golden snitch
€5
Snitch HP
€1.25
Harry Potter Christmas Ornaments - PACK X 5 WITH BASES
€2.82
Harry Potter Christmas Ornaments - PACK X 5
€2.73
Harry Potter COMBO SPECIAL!!!
€1.20
harry potters ball
€0.66
Harry Potter Christmas ornaments
€0.
60
Golden Snitch Pendant
Free
Harry Potter Golden Snitch Piggy Bank
€2 -50% €1
Echo Dot 3 ( harry potter golden snitch) (Pomo de ouro Harry Potter)
€6.20 -20% €4.96
Snitch for wall - Harry Potter
€0.76
Set of 4 Harry Potter Cutters
Free
Golden Snitch Mate - Harry Potter
€4.70
Harry Potter themed chinstrap ear protection for chinstraps
€1.36
HARRY POTTER QUIDDITCH - FLYING GOLDEN SNITCH WITH BASE (PRE-SUPPORTED)
€9.
41
Golden Snitch Cookie Cutter
Free
Saruman Pen / Pen of Saruman
€0.50
Time turner [Time turner] from Harry Potter
€1
Key Lock Cover Puzzle
€0.83
Snitch Harry Potter Echo Dot 3 Base
€4.28
Baby Yoda Toy
€0.75
Harry Potter Golden Snitch Stand
Free
Supernatural; Men of Letters: medal, necklace and bookmark
Free
Harry Potter Cookie Cutters set
€3.50
Free STL file Golden Snitch Harry Potter・3D printable object to download・Cults
Decorative Ornament Cage
Free
CSU Coin
Free
Best 3D printer files of the Art category
Mini Jellyfish Air Plant holder Set (SLA)
€1
Kalimba = 7x spinner + empty can #UPCYCLINGFIVERR
Free
Cheshire Cat
Free
DRAGON EGG Game Of Thrones
€1
Deactivated
another batman buddha
Free
WATOO WATOO in MAGNET or not
€1 -50% €0.
50
Best sellers of the category Art
CHRISTMAS TREE WITH LEGS
€2.89
Stitch Love (Easy print no support)
€1.50
Flexi Print-in-Place Imperial Dragon
€3.72
Biting Archaeopteryx
€3
Adorable Articulated Axolotl, Print-In-Place Body, Snap-Fit Head, Cute Flexi
€3.27
Cute Flexi Print-in-Place Circus Elephant
€2.78
CUTE FLEXI PRINT-IN-PLACE CROCODILE
€2.78
Flexi PRINT-IN-PLACE Hand
€1.83
Biting dragon
€3
Bat articulated toy, print-in-place body, snap-fit head, cute-flexi
€3.
27
Leopard Gecko Articulated Toy, Print-In-Place Body, Snap-Fit Head, Cute Flexi
€3.27
ZOU GHOST - GHOST WITH LEGS
€2.71
Cute Flexi Print-in-Place T-Rex Dinosaur
€2.78
Bearded Dragon Articulated Toy, Print-In-Place Body, Snap-Fit Head, Cute Flexi
€3.27
Cute Flexi Print-in-Place Frog
€1.83
Ball Python Snake articulated toy, print-in-place body, snap-fit head, cute-flexi
€3.72
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments.
Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.
DONATE: If you want, you can make a donation via PayPal.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!
Best Files for 3D Printing Snitch・Cults
Golden Snitch - Harry Potter
1.25 €
CHRISTMAS GOLD SNEAKER
€1.50 -40% 0.90 €
Harry Potter's Golden Snitch
1.50 €
nine0002 Mr.
Harry Tauren Pose 1 Free
Golden Snitch
1 €
Golden Snitch - Harry Potter
Free
Golden Snitch | Harry Potter | Wall
1.50 €
CUTTING THE GOLDEN STOCKER
1.24 €
nine0002 golden lamp3 €
Lamp "Snitch"
8,23 €
Harry Potter Key Rings
Free
Golden Snitch
0.89 €
Golden Snitch - Harry Potter
0.68 €
Quidditch medal
0.95 €
Echo dot 4 Alexa ( Harry Potter - Golden Snitch - boccino d'oro - Pomo de ouro)
3 €
Snitch bookmark Harry
1,50 €
Golden Snitch
0.
71 €
Mat Golden Snitch
Free
nine0002 Key ring "Hogwarts" - Harry Potter1,20 €
Golden Snitch
0.61 €
ECHO PILLBOX 4 (HARRY POTTER GOLDEN SNITH) (POMO DE OURO HARRY POTTER)
€6.35 -twenty% 5.08 €
Golden Snitch Keyring
0.55 €
Harry Potter snitch keychain
0,50 €
Harry Potter chibi cutter set x6
0.55 €
Vif d'or - Golden snitch
5 €
Snitch HP
1.
25 €
Harry Potter Christmas Ornaments - PACK X 5 WITH 9 BASES0003
2.82 €
Harry Potter Christmas Ornaments - PACK X 5
2.73 €
Harry Potter COMBO SPECIAL!!!
€1.20
harry potters ball
0,66 €
Harry Potter Christmas ornaments
0,60 €
nine0002 Golden Snitch PendantFree
Harry Potter's Golden Snitch Piggy Bank
2 € -fifty% 1 €
Echo Dot 3 (Harry Potter's Golden Snitch) (Pomo de ouro Harry Potter)
€6. -twenty% 4.96€
20
Snitch for wall - Harry Potter
0,76 €
Set of 4 Harry Potter Cutters
Free
Snitch's Golden Companion - Harry Potter
4,70 €
Harry Potter themed chinstrap ear protection for chinstraps
1,36 €
nine0002 HARRY POTTER QUIDDITCH - FLYING GOLDEN SNITCH WITH BASE (PRE-SUPPORTED)9,41 €
Golden Snitch Cookie Cutter
Free
Saruman Pen / Pen of Saruman
0,50 €
Time turner [Time turner] from Harry Potter
1 €
Key Lock Cover Puzzle
0.
83 €
Snitch Harry Potter Echo Dot 3 Base
4.28 €
Baby Yoda Toy
0,75 €
Harry Potter Golden Snitch Stand
Free
Supernatural; Men of Letters: medal, necklace and bookmark
Free
nine0002 Harry Potter Cookie Cutters set3,50 €
3D printing with Anisoprint: stronger, more functional, more affordable
In less than a year, the Anisoprint team, a resident of the cluster of nuclear, new industrial technologies and materials of the Skolkovo Foundation, has gone from a small project to a company with a large international order in the field of 3D printing for the aviation industry.
Fedor Antonov, General Director of the company, tells how they succeeded. nine0005
Andrey Azarov and Fedor Antonov at the Open Innovations 2015 forum.
Photo: TASS.
Anisoprint specializes in 3D printing with high-strength polymer composites. The technology developed by its specialists makes it possible to produce carbon fiber parts of complex shape and with a complex internal structure. The introduction of this technology will make it possible to produce parts with a complex reinforcement scheme and automate their production. Experts estimate that the global 3D printing market will be $18 billion by 2018, including 1 billion personal printed functional parts. nine0005
The company was founded on Cosmonautics Day
The project to develop technologies and equipment for the needs of the space industry was initiated at the Skolkovo Institute of Science and Technology (Skoltech) a year and a half ago. “We created the first real laboratory at the institute, which had equipment, employees, and ideas for projects. With the director of the center, Professor Gurdal, we formed a list of priority projects that were to be implemented in this laboratory.
The idea of “3D printing” of composites reinforced with continuous fibers seemed very promising to us,” recalls Fedor Antonov. nine0005
Then, in June 2014, an application was submitted for a subsidy from the Ministry of Education and Science under the Federal Target Program "Research and development in priority areas of development of the scientific and technological complex of Russia for 2014-2020". With the support of the management of Skoltech, a consortium of performers was formed, which also included St. Petersburg Polytechnic University, TPU, ISPMS SB RAS, MISiS and IPMash RAS. The project received government support.
“Skoltech was supposed to develop the equipment, SPbPU was to develop a design and engineering system, the rest of the consortium members were involved in testing. We passed the competitive selection, taking first place out of several hundred projects,” explains the director of Anisoprint. nine0005
The agreement with the Ministry of Education and Science was concluded only in October 2014, and a month later it was necessary to hand over the first stage of work, which included the development of an extruder (printer printhead) as the main element of the system, its manufacture and testing, manufacturing and testing of samples.
Due to the very tight deadlines, it was not possible to do the work properly, but this did not prevent the team from getting results at the beginning of 2015, which at that time had no analogues in the world.
“It was a breakthrough! We were very excited. I wrote an article on Composite online. The article was followed by a press release and serious interest from the press. Vesti and RBTH came to us and filmed stories about us,” says Antonov. “As a result, interested industrial partners (Bosch, Samsung) began to write to us, and guys from the Skolkovo nuclear cluster came to us and offered to apply for resident status.” nine0005
Since the first stage of project work was accepted with reservations, the Skoltech project has changed leadership. Then the team decided to go on an independent voyage. Fedor Antonov describes this decision as follows: “We consider April 12, 2015, the day of cosmonautics, to be the official foundation day of the company. On this day, the guys and I decided that we would do our job, continue to develop technology in the same direction, on our own.
We did not doubt and do not doubt that the technology has great prospects.” nine0005
After successfully passing the Skolkovo examination, on June 26 the team received a certificate of state registration for LLC Anisoprint, and on July 22 - the status of a resident of the Skolkovo Foundation. In addition, at the annual start-up conference, Startup Village took first place in the Industrial Technologies track.
Now Anisoprint has started cooperation with Skoltech as an independent entity. “We are an implementation startup designed to implement the technology developed at Skoltech,” Antonov proudly says. nine0005
The secret of unprecedented results
The technology of 3D printing of composites, which is being developed at Anisoprint, makes it possible to produce products from a composite material that is not inferior to powder metals in terms of strength and rigidity. Such characteristics are provided by introducing continuous reinforcing fibers into the material.
“Our material is a composite consisting of two main components - a binder and a reinforcing fiber. In our case, plastic acts as a binder, and carbon fiber, one of the strongest and lightest materials known to mankind, acts as a reinforcing fiber. Such composites are actively used in the construction of rockets, satellites, aircraft, machines,” explains Antonov. nine0005
Anisoprint printed parts. Photo: Anisoprint
According to him, the very idea of introducing continuous reinforcing fibers into the 3D printing process - the layer-by-layer application of a molten plastic thread - is very simple. The printer has a print head - an extruder, where plastic is fed in the form of a thread, where it melts and flows out under the action of pressure on the working surface. The extruder is driven by a three-axis drive. nine0005
The printer prints with plastic, the question is how to add carbon fiber to it.
Each carbon fiber consists of hundreds and thousands of micron-diameter filaments, and there can be from 1,000 to 24,000 such filaments in one fiber.
Traditional composites are made by impregnating this fiber with a thermoplastic that has a low viscosity in the uncured state so that the binder easily penetrates and spreads between the filaments by capillary action. But the disadvantage of thermoplastic is that it hardens once and cannot be melted for subsequent printing. Therefore, 3D printers use thermoplastics, which melt when heated and solidify when cooled. But their significant drawback is the viscosity, which does not allow penetration between the fibers. nine0005
According to Antonov, the solution was found almost by accident. Together with the current technical director Andrey Azarov, who works part-time at TsNIISM, they revived unclaimed technology and equipment for creating impregnation coatings for carbon fiber. “We took some of this fiber and tried it in our technology - the result exceeded all our expectations. Now, we are working together on a new generation of impregnation. It is this impregnation that ensures the solidity of the composite, the adhesion of the fiber to the plastic, and a number of other unique properties.
Thus, our material is three-component. A special impregnation holds the threads together inside the fiber, and the plastic glues these bundles together,” explains Antonov. nine0005
Andrey Azarov. Photo: TASS
He also emphasized that high strength and rigidity is provided (as in all composites) due to the absence of pores, strong connection of the components to each other, and a high percentage of reinforcing fibers in the composite. At present, the volume fraction of fibers in the material used by Anisoprint is 25–30%, while in traditional structural carbon fiber it reaches 40–60%. Increasing the volume fraction by another 10 percent will double the strength of the material. nine0005
Fruitful cooperation
At the beginning of November 2015, at the Open Innovations exhibition, Anisoprint showed the most durable material known for 3D printing of composites. Fyodor Antonov and Andrey Azarov demonstrated how to print a carbon-fiber lattice stabilizer for an ultralight rocket, which is currently being developed by the domestic company Lin Industrial, also a Skolkovo resident.
“In addition to Lin Industrial, we cooperate with the Zdravprint company, which manufactures orthoses and fixators,” Fedor Antonov explains. — Together with the Skolkovo partner Dauria-Aerospace [ a pioneer of private cosmonautics in Russia - approx. rev .] we design a space telescope frame for manufacturing according to our technology. And for the guys from the Snitch project, we will print the body of a selfie drone.”
In addition, Anisoprint is negotiating with NPO Tekhnomash on the use of its own technology for the manufacture of elements of the Advanced Manned Transport System developed by RSC Energia, and with Rostec on the use of a printer for printing parts for unmanned aerial vehicles. nine0005
Prusa i3 Steel 3D printer with Anisoprint printhead. Photo: Anisoprint
One of the unconditional successes of the company is considered to be the development of a print head for an industrial 3D printer.
“Together with American partners, we are developing a plant for the manufacture of aircraft interior elements, such as tubes, fittings, brackets made of non-combustible plastic. The work is carried out in the interests of the Airbus concern. Right now we are launching our print head at them,” comments the general director of Anisoprint, commenting on the development of international cooperation. nine0005
At the end of the story, Fedor Antonov shared the company's plans for the future: “The idea of manufacturing three-layer panels of variable surface density and stiffness seems to us to be potentially very interesting. Such panels (honeycomb panels) are actively used in aviation and space. Here we have a few ideas that we want to patent.”
The Skolkovo Foundation highly appreciates the achievements and potential of Anisoprint. Evgeny Molchanov, project manager of the Fund's Nuclear, New Industrial Technologies and Materials Cluster, shared his observations on the startup's growth.
According to him, a successful start, first of all, is due to the full dedication of the Anisoprint startup team, aimed at results. “I have known the participants since the beginning of the commercialization phase, and the tenacity with which this company is created as an independent business unit allows me to conclude that global success will not be long in coming. The Anisoprint startup is becoming an example of successful technology entrepreneurship and inspires many Russians to engage in innovative business aimed at international markets,” Molchanov emphasized. nine0005
At the same time, the company has a lot of room to grow, and it will take a long way to create a serious industry player, which will require professional support, a representative of the Skolkovo Foundation believes. “Investments and protection of intellectual property will be required. To do this, there are Skolkovo investment support tools that allow minimizing the risks of investors and enable startups to patent their developments in potential markets at minimal cost,” Evgeny Molchanov noted the advantages of working with the Fund.
