Magnetic 3d printer build plate


Flexible Build System

What Is The Wham Bam Flexible Build System?

Are you having a difficult time getting your 3D print to stick to your printer bed? Does your print peel up during a long print and destroy your work? Are you tired of temporary fixes such as glue sticks, hair spray, and painter’s tape? Once you get your print to stick, do you have to pry, chisel, cut the perimeter, or put your bed in the freezer, just to get your print off the surface without gouging the surface or cutting yourself?

  

We have created the specially formulated Wham Bam PEX Polymer Build Surface which surpasses PEI in temperature resistance, performance, and material ‘stickability”.  It sticks so well you would have a heck of a time getting the print off the bed without our Wham Bam Flexi Build Plate. Simply remove the Wham Bam Flexi Build Plate from the Wham Bam Flexi Magnetic Base on your 3D printer when the print is finished and flex slightly to pop your print right off! See our demo video below.

Flexible Build System In Action

What the Reviewers are saying:

"Thank You Guys"

"It Just Pops Off"

"It Just Pops Off"

"I honestly stopped using my printer for a while because my prints stuck so well that I'd ruin them or break the glass trying to get them off. The Wham Bam System has got me heavily into 3D printing again. Thank you guys!" - Rob R.  

"It Just Pops Off"

"It Just Pops Off"

"It Just Pops Off"

"I’m liking how the prints look. Super smooth on the bottom. And I love that it just pops off. No more spatula. My installation experience went pretty smooth" - Carlos P

See More Reviews

"Class Of Its Own"

"It Just Pops Off"

"Class Of Its Own"

 "The fact that the magnets are able to withstand higher temperatures puts this system in a class of its own. Capable of using a wide range of materials that other companies cannot claim without damaging their magnetic sheet permanently." -  James P

The fit to your machine is the buyer's responsibility

Please measure your bed (do not rely on build volume) before ordering noting that the spring steel Flexi Plate has two front tabs that stick out by 10mm on smaller kits and 15mm on larger kits. Wham Bam will not be responsible for mistaken sizes ordered. Click here for more sizing info 

Sizes and Machine Fits

Shop Now

More sizes being developed now!

Click here to request a new size Flexible Build System.

Quality Materials

Our Wham Bam Flexi Build Plates are made from high quality spring steel that won't kink or warp when you flex them, they just return back to shape! The Spring Steel has been formulated with a Chromium Alloy creating a rust proof steel for long life.

Our magnets and films have all been formulated to resist over 150°C so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.

 We have developed the Wham Bam PEX Build Surface from a specially formulated polymer with a higher melt point than even PEI to attract most any filament without damaging the sheet. Prints easily pop off once cooled and flexed. 

Wham Bam Newsletter

 Get exclusive deals, new product insights, plus some helpful tips and tricks ... just let us know where to send it! 

Sign Up

3DJAKE Magnetic Plate - 3DJake International

Improve your printer with this simple upgrade!

170 Customer Ratings

3DJAKE Magnetic Plate

49,99 €

(Price shown includes 19% VAT. - )

Model type : 510 x 510 mm

Delivery by Tuesday, 27 December if you order by Friday at 07:00.

In stock

Delivery after Christmas. Still searching for Christmas gift ideas? Then give our printable Gift Certificates a go.

Quantity discount available!

  • from 2 only 44,99 € / pc -10%

Quantity:

There are only 85 items of this product left in our warehouse. More are on the way! The delivery date could be affected if you order more than this quantity.

Free shipping in Germany.

Features & Advantages

  • Good adhesion
  • Flexible
  • High quality
  • Simple installation and use

Item no.: CB-MB510X510, Content: 1 pc, EAN: n/a

Questions & Answers about 3DJAKE Magnetic Plate

Receive answers from other customers who purchased this product. Please forward any other order-related questions to our Customer Service Team.

  • When levelling printing surface on Elgoo Neptune2 with plate and magnetic base installed, rear left quadrant will not lower enough to give any nozzle clearance.

    .. help??!!

    1 Answer, last answered on 19 November 2022

  • I have CR10 S4 & bed is a little warped (low in middle) which is why I use aluminium tape to build it up then 3mm mirror on top. Could I put this PEI sheet directly on bed & tape ?

    1 Answer, last answered on 29 June 2022

  • Hi. The two worries I have is that 1) the heat from the bed won’t reach through the plate and 2) the adhesive may give off toxic fumes when heated. Any help?

    1 Answer, last answered on 28 December 2021

  • Could you use this on a zortrax M300, if you bought a larger size and cut it to fit?

    1 Answer, last answered on 02 November 2021

  • Will one of these fit the new Ender 6?

    1 Answer, last answered on 16 June 2021

  • will I have to cut holes in magnetic plate to access screws which hold printbed to runners? Is that OK, easy, safe?

    3 Answers, last answered on 14 June 2021

  • I printed a shape with 0.

    25mm PLA on to this bed at 50o and it stuck to the bed. Even when cold and the bed was flexed the model would not come off. Anyone else had this problem?

    This question has not been answered yet.

  • I have one of these on my Cr10 but need to print ABS recommended temp is 100 for the bed as anyone used these with abs ?

    This question has not been answered yet.

  • with the magnetic build plate, when printing with PETG what bed temperature do you recommend

    1 Answer, last answered on 29 March 2021

  • on the 3D Jake magnetic build plate what gap do you recommend between the build plate and the hot end nozzle when printing with PETG filament and a 0.4mm nozzle.

    1 Answer, last answered on 29 March 2021

Show all answers

Customer Reviews

  • JohnV

    25 November 2022

    Verified purchase

    "Verified purchase" means that the rating was submitted by someone who has a customer account and purchased this product directly from our website. However, anyone with a customer account can rate our products. Close this note

  • Paul W

    13 November 2022

    Verified purchase

    "Verified purchase" means that the rating was submitted by someone who has a customer account and purchased this product directly from our website. However, anyone with a customer account can rate our products. Close this note

  • Will

    11 September 2022

    Verified purchase

    "Verified purchase" means that the rating was submitted by someone who has a customer account and purchased this product directly from our website. However, anyone with a customer account can rate our products. Close this note

Related products

  • Creality 3D Printer Build Surface 14 Model types

  • Creality Cartridge Heater Kit 3 Model types

  • Creality Thermistor Kit

  • Creality Radial Fan Kit 3 Model types

  • Creality Axial Fan Kit 4 Model types

  • Creality Belt Kit 3 Model types

  • Creality Roller with Bearing

  • Creality Stepper Motor 8 Model types

  • Creality Limit Switch

  • Creality Drive Gear

  • Creality Leveling Twist Nut

  • Creality Z-​Coupler

  • Creality Carborundum Glass Plate 23 Model types

  • Creality Part Cooling Fan 5 Model types

  • Creality Heatsink 5 Model types

Customers also bought

  • 3DJAKE PTFE Tube 4 Model types

  • BROZZL MK8 Brass Nozzle 5 diameters

  • 3DJAKE ecoPLA -​ Black 10 Model types

  • Creality PEI Flexible Build Plate 18 Model types

  • 3DJAKE Nozzle Cleaning Set

  • 3DJAKE Isopropyl Alcohol 1 liter

  • 3DLac Spray Adhesive 400 ml

  • 3DJAKE ecoPLA White 10 Model types

  • 3DJAKE ecoPLA Red 6 Model types

  • AprintaPro PrintaClean 250 ml

  • Creality Metal Extruder Upgrade Kit

  • 3DJAKE Vacuum Set -​ Including Pump 1 set

  • 3DJAKE Flexplate System with Nano-​Coating 4 Model types

  • 3DJAKE Glass Plate with Chemical Coating 5 Model types

  • 3DJAKE Threaded Inserts (50-​piece set) 5 Model types

  • Free delivery in Germany
    from 49,90 €

  • Free
    returns

  • Delivery in 1 - 2 business days.

  • More than 7.900 products

Magnetic flexible platform for 3D printer build surface 300 x 300 mm

Share to:

  • Description
  • Reviews (6)
  • Delivery and payment
  • Bulk request

Descriptions

1. Magnetic flexible platform
2. It can be separated from the hot bed and easy to get the model down
3. Hot bed magnetic connection.
4. No deformation
5. Recyclable
6. No need for shovel and glue

Specification

  • All (6)
  • Photo (1)
  • Video (0)
  • Sort by: All

    All Popularity Most Helpful Most Recent

  • Translate into English

  • Francesco

    Yes (0)

    Buon prodotto

    Il prodotto e giunto per posta dopo qualche giorno in una busta ben sigillata.
    Sono due superfici magnetiche adese tra loro, una potrà essere attaccata sul piano riscaldato e sull'altra si potrà stampare.
    La superficie di stampa è morbida ma offre buone caratteristiche, si scalda uniformemente, l'ho provata con il PLA, il filamento aderisce bene in fase di stampa e per essere rimosso non ha bisogno di grosse frizioni tanto che si riesce a rimuovere i modelli anche senza distaccare il piano magnetico. nine0018 La potenza magnetica tra le due superfici non è eccezionale, pertanto continuo ad usare le mollettine per favorire il fissaggio ed evitare possibili deformazioni dovute alla dilatazione termica durante il riscaldamento. Yes

    Jan 06.2020 (0)

    Plataforma flexible magnético de 3D Construir superficie de la impresora 300 x 300 mm

    ESTE Articulo PlataForma Flexible Magnético de 3D Construir Superficie de la Impresora 300 Mm ES de Muy Buena Calidad
    9000 9,000 9,0009,000
  • 9000

    0

    0

    0 Sito

    0 Sito

    0 Sito (0)

    que rapidez de entrega

    todo correcto en el envío, llego muy rápido, en perfecto estado y igual que en la descripcion0006

Dec 5. 2018

  • jm

    Yes (0)

    flex plate 3d print

    Thank you for this shipping . Very fast shipping , Very good description. very nice quality.Best price for this . Yes (0) nine0003

    Rapido

    Recomiendo vendedor y producto
    Es muy fácil su uso

    Mar 21. 2019

  • Want to buy in bulk? Please submit your wholesale inquiry below. Please note that we usually don't provide free shipping on bulk orders, but the wholesale price will be a big deal.

    Your target price:

    Quantity ordered:

    Country

    Your name:

    Your Phone:

    Your Email:

    Company Name:

    Inquiry Details:

    Your Recently Viewed Items

    Pre-Sales Support

    Best 3D printers of 2022 | Rating of TOP models of 3D printers for printing

    Contents [Show] nine0003

    The modern market of additive equipment offers many options for 3D printing equipment designed to solve various problems. Devices are in demand in engineering and design, architecture, medicine, industry, education, entertainment, engineering and many other fields.

    Let's talk about what you should pay attention to when choosing a 3D printer, and also consider the rating of the best equipment models for amateurs and professionals in 2022. nine0003

    How to choose the right 3D printer

    There are a number of basic parameters that you need to pay attention to when choosing a printer for bulk printing. Let's briefly consider each of them.

    Printer type

    According to the ISO / ASTM 52900: 2021 standard, approved by the International Organization for Standardization, 3D printers are divided into several categories depending on the characteristics of the printing process (for convenience, we will duplicate the trade names for each category): nine0003

    1. DED (SLS, MJF) - deposition and melting of material using a directed electron or laser beam.
    2. BJT (CJP, NPJT) - selective jet application of a binder composition to the powder for sintering.
    3. MJT (MJP) - Layered inkjet application of photopolymer resin.
    4. MEX (FDM, FFF, PJP) - layer-by-layer application of the consumable through a heated nozzle (extrusion).
    5. VPP (SLA, DLP, LCD, CDLP) - photopolymerization, selective curing of a liquid photopolymer in a bath under the influence of a light source. nine0006
    6. SHL (LOM, Composite Lamination) - gluing (lamination) of sheets of material.
    7. PBF (SLM, DMLS, EBM) - fusion of certain areas of the powder layer under the influence of thermal energy.

    Approval

    This parameter largely depends on the printing technology and is standardly described in the vertical and horizontal planes (Z and XY, respectively).

    The Z resolution is the height/thickness of the layer. The thinner the layer, the more accurate and detailed the model will be. XY resolution is the smallest possible movement of the print head, which cannot be less than the diameter of the nozzle or laser beam. nine0003

    The highest resolution is provided by photopolymer 3D printers.

    Compatible materials

    The choice of consumable depends on the 3D printing technology used. FDM printers use special thermoplastics in the form of filaments (PLA, HIPS, ABS, PET, PETG, Wood, Flex, etc.), while photopolymer printers use various light-sensitive liquid resins. Sintering technology devices are designed to use engineering thermoplastics or metals in powder form. nine0003

    Many professional printers work with special purpose materials - composites (glass-filled materials, carbon fiber, etc.), metals, wood, concrete, ceramics, dental photopolymers, wax, etc.

    Print platform (desktop, build platform)

    This is the plate on which objects are printed. A high-quality platform ensures reliable adhesion of models to the surface (adhesion) during printing and at the same time makes it easy to separate them at the end of the process. nine0003

    Typically, the print bed is made of glass, but other materials can also be used. To improve the contact of the material with the platform, special sprays and adhesives increase adhesion (Adhesion). Professional models of 3D printers usually have features that increase the resistance of printing to failures:

    • flexible, removable or magnetic platform;
    • automatic print area alignment system;
    • heated platform for handling high temperature materials. nine0006

    Security

    3D printing can be associated with some risks even when all safety regulations are followed. For example, high-temperature printing increases the risk of burns, and some powder materials or photopolymer resins are harmful to the skin.

    To reduce the risk of exposure to toxic substances, some printers recommend the use of protective chambers, air filtration and ventilation systems, protective gloves, and goggles. There are also models of 3D printers designed to be serviced exclusively by trained personnel. nine0003

    Noise level and motor drivers

    Drivers and stepper motors directly affect the noise level during equipment operation. More advanced and expensive drivers, coupled with high-quality stepper motors, contribute to a significant reduction in the noise level during the printing process.

    Self assembly

    Most manufacturers offer additive devices that are ready to go. But some models of 3D printers are presented as self-assembly kits (DIY kits). When buying, you need to consider that assembling such a device can cause certain difficulties, especially for the first time. nine0003

    Product size

    The choice of the area of ​​the working area of ​​the equipment depends on the dimensions of the parts that are planned to be printed on a 3D printer. For a home, it is enough to purchase a device with parameters up to 200x250x200 (WxHxD). This is enough to solve most problems. For more serious tasks, we recommend considering models with a working area of ​​at least 306x306x610 (WxHxD), such a print volume will allow you to print large objects without subsequent gluing with the same print quality and resolution. nine0003

    Technology

    Let's take a closer look at the main technologies used in the field of 3D printing:

    1. FDM is a method of layer-by-layer deposition of plastic filament threads. Ideal for creating functional prototypes and parts from high-strength industrial plastics.
    2. DLP - layer-by-layer curing of photopolymer resins using LED projectors. Allows you to produce ultra-precise, highly detailed objects with a high-quality surface. nine0006
    3. SLA - curing layers of liquid photopolymer using a laser beam. Suitable for printing very precise products with complex geometry and fine details.

    Multicolor print

    There are modifications of printers that support the function of printing in two or more colors. Most of these FDM devices are equipped with two presses filled with threads of different colors. A separate file is used to print each color, and sections of different colors are combined with each other like a three-dimensional puzzle. There are also color powder printing technologies, such as CJP or MJM, but the range of their application is limited to simple layout or prototyping. nine0003

    Print surface

    The surface quality of finished models depends on both the technology used and the print resolution. If necessary, the products are easily amenable to post-processing.

    Housing type

    Volumetric printers are available in an open or closed case. Open type devices are cheaper, but may have print quality issues and shrinkage of ABS products due to temperature changes. Enclosed printers have a more rigid, stable design and deliver high quality builds because their print surface is protected from dust and other unwanted particles. In addition, they have a low noise level and are safer to operate. nine0003

    Connection

    The majority of modern 3D printers have built-in memory, a port for USB flash drives or are equipped with SD memory cards, which allows you to continue the 3D printing process without a permanent connection to a PC. Some devices may also support wireless technology (Wi-Fi or P2P) or connect via Ethernet. Recently, more and more manufacturers include in their devices the possibility of forming 3D printing farms from a cluster of devices connected by one local network. nine0003

    Software

    Additive technology comes with special software or is compatible with open-source programs that can be downloaded, for example, from the manufacturer's website. As a rule, the software runs on Windows, Linux or MacOS. The software package may include modules for optimizing 3D models, building automatic supports (supports), controlling the movement of the printing block and desktop, and advanced preparation of layers for printing. nine0003

    3D printer models

    Consider the different models of amateur and professional 3D printers recognized as the best in 2022.

    Assembly kits

    Self-assembly kits (DIY) are the most budgetary and popular variant of FDM/FFF/PJP 3D printers in Russia. The use of such kits allows you to independently assemble, configure, reconfigure and upgrade printing devices to suit your needs.

    The most popular DIY kits in 2022: nine0003

    Creality Ender 3

    Thoughtfully designed home 3D printer with open chamber, large build area (WxHxD: 220x250x220mm) and high print quality at speeds up to 180mm/s. Works great with PLA, ABS, PETG, TPU, Wood and other plastics. Equipped with a single extruder, a heated worktable, a compact display that shows the main parameters, and an active cooling system. Suitable for printing small functional items, prototypes or decorative figurines. Connects via USB or microSD. nine0003

    Flying Bear Ghost 5

    Equipment for semi-professional use, equipped with an open chamber with dimensions of 255x210x210 mm. Due to the uniform supply of the filament, it allows you to produce high-resolution parts at a speed of up to 150 mm / s and an accuracy of up to 0.01 mm. The model is equipped with one extruder, a heated table, options for adjusting speed and temperature, an active cooling system and a convenient TFT color display. Compatible with HIPS, ABS, Wood, PLA, etc. Reliable, quiet operation. Connects via Usb, SD, Wi-Fi. nine0003

    Creality Ender 5 Plus

    A printer with a large working area (350x350x400 mm), one extruder and a filament sensor that prevents printing errors due to tangles or broken threads. It has a magnetic platform with heating up to 100 degrees in 10 minutes, a rigid, reinforced cubic frame and a reliable power supply with overheat protection. Provides fast, high-precision, stable printing with an adjustable layer thickness of 0.1-0.4mm.

    Creality Ender 6

    Equipment with a closed plastic case, one extruder with a heating temperature of up to 260 degrees, a color touch screen and a build area of ​​250x250x400 mm. Ideal for small batch production and prototyping. The printer is equipped with a heated bed, connects via SD and is compatible with most of the available filaments. The layer height is 0.1-0.4 mm.

    Budget 3D printers

    This category includes inexpensive, ready-to-use FDM/FFF 3D printers designed for beginners - ordinary users, students in robotics circles, schools, etc. The devices are endowed with additional options that allow you to achieve excellent results with simple, understandable operation. nine0003

    The best budget models of 2022:

    Anycubic Mega S

    Functional equipment with a working space of 210x210x205 mm and the possibility of resuming the work process after a power outage. The device has a color touchscreen, a heated platform with Ultrabase coating, connects via data cable or SD and prints at speeds up to 100 mm/sec. Layer height - 0.05-0.3 mm.

    FlashForge Adventurer 4

    A good option for children or teenagers who are fond of 3D modeling. The printer has a working area of ​​200x200x250 mm, a heated platform, a color touch screen and is connected via USB, Ethernet or Wi-Fi. Construction speed - up to 150 mm / sec. Layer thickness - 0.1-0.4 mm. The model is also equipped with a built-in webcam, a filament end sensor, an auto-calibration function and the possibility of remote control through the application.

    Voxelab Aries STEM

    A printer with a full range of modern functions, designed to create objects of standard sizes (200x200x200 mm). Prints at speeds up to 80 mm/sec. and a layer thickness of 0.1-0.4 mm. Connection - Usb, SD, Wi-Fi. nine0003

    QIDI i-Mate S

    A device with a working space of 260x200x200 mm, connected via Usb, LAN or Wi-Fi. Layer thickness - 0.05-0.2 mm, construction speed - up to 80 mm/sec. Great for prototyping simple objects.

    Budget Large Format 3D Printers

    Devices designed to create a large number of small products in one go or to print large objects. These printers are equipped with a capacious platform and have increased reliability and stability. nine0003

    The most popular low-cost large-format FDM 3D printers in 2022:

    Wanhao D12/500

    A model with an improved component base and mechanics, updated electronics, a redesigned feed mechanism, a heated platform and two extruders. Construction area - 500x500x500 mm. Layer thickness - 0.1-0.4 mm, build speed - up to 150 mm/sec. Connection - Wi-Fi, MicroSD.

    Creality Ender 5 Plus

    Apparatus with dimensions of the working area 350x350x400 mm. It has a robust construction with a reinforced structural profile frame and a heated platform. Provides the most accurate, stable printing and smooth, stable movement along the axes. Connected via SD. The layer height is 0.1-0.4 mm.

    Creality CR-10S Pro V2

    A 3D printer that delivers high performance and exceptional print stability. Ideal for creating print trusses that produce large runs of the same type of parts. Construction volume - 300x300x400 mm. Print speed - up to 180 mm / sec. (recommended speed is up to 60 mm/s). Layer height - 0.1-0.4 mm. Connection - SD. nine0003

    Professional 3D printers

    Professional-grade printers are designed to produce complex objects using high-temperature engineering plastics and other consumables. Such equipment has a closed chamber to maintain a certain temperature and ensure stable printing.

    Best Professional FDM 3D Printers of 2022:

    FlashForge Creator Pro 2

    Technique with two independent extruders for simultaneous printing of two identical products. The second extruder can be used to create soluble supports for the production of complex models with a quality surface. Construction area - 200x148x150 mm. Layer height - 0.1-0.4 mm, build speed - up to 100 mm/sec. Connection - Usb, SD.

    Picaso Designer Classic

    A printer designed to solve a wide range of tasks. It has built-in profiles for different types of plastic, which makes it easy to start printing. Chamber size - 200x200x210 mm. Work speed - up to 100 cm3 / h, layer thickness - from 0.01 mm. Connection - Usb, Ethernet. nine0003

    Anycubic 4Max Pro 2.0

    Advantages of the model: dual drive extruder for working with soft, flexible plastics, filament end sensor, silent drivers, color display. The device provides the most accurate, stable printing at speeds up to 150 mm/sec. Camera dimensions - 270x210x190 mm. Layer thickness - 0.05-0.3 mm. Types of connection - Usb, SD.

    QIDI Tech X-Plus

    A printer with a capacious working chamber (270x200x200 mm), one extruder with a heating temperature of up to 300 degrees and a build speed of up to 150 mm/sec. Equipped with a heated platform, connects via Wi-Fi, Usb or LAN, the layer height is 0.05-0.2mm. nine0003

    Single extruder professional 3D printers

    Additive equipment of this kind is designed to solve various problems, from relatively simple to complex.

    The most popular models of professional FDM/FFF 3D printers with one print head:

    Picaso Designer X S2 (Series 2)

    The main difference of this modification is the heating of the extruder up to 430 degrees, which allows working with a wide range of plastics, including engineering ones (ABS, PETG, PLA, PEEK, Nylon, Flex, etc.). Dimensions of the working chamber - 201x201x210 mm. Connection - Usb, Ethernet. Speed ​​- up to 150 mm / s. Layer thickness - from 10-250 microns. The printer is equipped with a heated bed. nine0003

    QIDI X-Max

    A 3D printer with a large printable area (300x250x300 mm) and a wide range of useful features. It has a robust design with a strong double Z-rail, a heated platform with a double-sided coating for working with different types of plastic and a 5-inch touch screen. The extruder heats up to 300 degrees. Compatible filaments - PLA, ABS, PETG, PC, Carbon, Nylon, Flex, etc. Connection type - USB storage, LAN, Wi-Fi. Working speed – up to 150 mm/sec. Layer height - 0.05-0.2 mm. nine0003

    Picaso Designer XL S2

    The model is designed for printing with engineering and refractory materials, as the print head heats up to 430 degrees. Robust aluminum body with steel frame guarantees reliability and no vibration during operation. Chamber size - 360x360x610 mm. Speed ​​- up to 130 cm3 / h. Layer thickness - 10-250 microns. Connection type - USB-drive, Ethernet.

    TierTime UP300

    It is equipped with three separate extruders for working with different materials (low-temperature, high-temperature, standard), as well as various interchangeable platforms (smooth, perforated, glass). Supports print queue for different users. Dimensions of the working area - 205x255x225 mm, layer height - 0.05-0.4 mm. Connection - Usb, LAN, Wi-Fi.

    Bizon 3

    An updated version of the Bizon 2 model. Layer thickness - 0.02 - 0.65 mm. Print area size: 300x300x400mm. Print speed: up to 160 mm/s. Layer height: from 0.02 to 0.65 mm. Connection type: USB, SD card. nine0003

    Mid-range large format 3D printers

    This category includes models for universities, specialized colleges and offices of medium-sized companies.

    The best mid-range large format FDM 3D printers in 2022:

    Raise3D Pro3 Plus

    Equipment with a transparent body and two extruders equipped with a lifting mechanism, well-thought-out kinematics, interchangeable nozzles of different diameters and a convenient 7-inch color touch screen. Other options: Low Filament Sensor, Print Resume System, RaiseCloud Firmware, Webcam, IdeaMaker Slicer, RaiseCloud Cloud Service. Printed volume: 300x300x605 mm (for one extruder), 255x300x605 mm (for two extruders). Connection - Wi-Fi, Usb, LAN. Speed ​​– up to 150 mm/sec. Layer thickness - from 0.01 mm. nine0003

    Flash Forge Creator 4

    High-performance, accurate 3D printer with a system of two independent extruders and an advanced thermal management system inside the chamber (to protect against cracking and deformation of engineering plastics). Robust steel body prevents vibration. Print area - 400x350x500 mm. Speed ​​– up to 200 mm/sec. Layer height - from 0.01 mm. Connection - Usb, Wi-Fi, LAN.

    Picaso Designer XL Pro S2

    Large-format model with a working area of ​​360x360x610 mm, a heated platform and two extruders with a heating temperature of up to 430 degrees. The device has a simple automatic calibration, a built-in material spool drying mode and a plastic feed control system. Layer thickness - 0.01 mm, speed - up to 130 cm3/h. Connection type - Usb, Ethernet.

    CreatBot D600 Pro

    The printer with the largest print area is 600x600x600 mm. Equipped with two extruders with heating up to 260 and 420 degrees respectively (for working with standard or engineering plastics). Other features: heated chamber, platform and compartments, speed - up to 120 mm/s, layer thickness - from 0.05 mm. Connection type - Usb. nine0003

    Professional Dual Extruder 3D Printers

    Professional FDM printers with two extruders are designed to solve the most complex tasks. This technique is equipped with a fully functional slicer and a reliable nozzle lift mechanism or independent extruders.

    The most popular professional grade dual extruder 3D printers:

    Raise3D Pro2 Plus

    The flagship model of the manufacturer, endowed with a full range of useful features. The equipment, enclosed in a transparent case, is connected via Usb, Wi-Fi or LAN and is distinguished by quiet operation. Equipped with an extruder lifting mechanism, a 7-inch color touch screen, a filament end sensor, and a print resume system. Includes RaiseCloud software, webcam, replacement nozzles. Print volume - 305x305x605 mm (for 1 extruder), 280x305x605 mm (for 2 extruders). Speed ​​– up to 150 mm/sec. Layer height - from 0.01 mm. Connection - Usb, Wi-Fi, LAN. nine0003

    Picaso Designer X Pro S2

    A compact device with dimensions of the construction area of ​​201x201x210 mm, providing excellent print quality. It has a high temperature mode with heating up to 430 degrees for printing with complex filaments. Speed ​​- up to 130 cm3 / h, layer thickness - from 0.01 mm. Connection - Usb, Ethernet.

    Raise3D E2

    High-performance 3D printer with two independent print heads (IDEX system), heated platform and print speed up to 150 mm/sec. A built-in step-by-step video instruction for site calibration is provided. Layer thickness - 0.02-0.25 mm. Connection - Usb port, Wi-Fi, LAN. Print volume - 330x240x240 mm (1 printhead), 295x240x240 mm (2 extruders).

    FlashForge Creator 3 Pro

    Model with a large chamber (300x250x200 mm), HEPA filter, built-in webcam, color screen and the ability to install hardened nozzles with a material melting point of up to 320 degrees. The heating speed of the working platform is up to 120 degrees in 3 minutes. Print speed - up to 150 mm / sec. Layer thickness - 0.05-0.4 mm. Connection type - Usb, Ethernet, Wi-Fi.

    CreatBot F430 PEEK

    3D printer ideal for PEEK and other filaments. Equipped with a closed chamber with temperature support and two printheads with heating up to 260 and 420 degrees, respectively. Construction area - 400x300x300 mm. Layer height - from 0.02 mm. Speed ​​– up to 180 mm/sec. Connection - Usb.

    Ultimaker S5

    An easy-to-use device that prints with threads of non-standard diameter - 2.85 mm. The size of the working area is 330x240x300 mm. Layer thickness - from 0.02 mm. Speed ​​- 24 mm3 / sec. Connection type - Usb, Ethernet, Wi-Fi. nine0003

    Photopolymer desktop 3D printers

    Modern models of 3D printing devices using photopolymers are equipped with monochrome displays with a resolution of up to 8K, which provide high speed and quality of building objects of any geometry.

    Best photopolymer 3D printers of 2022:

    Phrozen Sonic Mini 8K

    A compact budget LCD printer with over 2000 hours of uninterrupted operation. Equipped with 8K 7.1” Mono LCD display. Print volume - 165x72x180 mm. Layer height - 0.01-0.3 mm. Resolution along the XY axis - 22 microns. nine0003

    Phrozen Sonic 4K 2022

    Equipment for permanent loads, ideal for dental laboratories and dental clinics. It has a heated chamber 134x75x200 mm with an odor filter and a Mono 4K 6.1” LCD display. Layer thickness - 0.01-0.3 mm.

    Formlabs Form 3+

    LFS printer with an intuitive interface and many special settings. The light source is a 250 mW laser. The size of the working area is 145x145x185 mm. Layer thickness - 0.025-0.3 mm. nine0003

    Anycubic Mono X 6K

    3D printer with a working chamber 197x122x245 mm and a high-quality Mono 6K 9.25” LCD screen. Layer height - 0.01-0.15 mm.

    XYZ Part Pro 150

    Equipped with a 5 inch LCD touch screen. Illumination source: 405 nm UV laser. Print area size: 150x150x200 mm. Layer thickness: 25 to 200 microns (0.025 - 0.2 mm).

    Best Large Format Desktop Resin 3D Printers

    Phrozen Sonic Mega 8K

    The best 3D printer in its segment, capable of solving tasks that usually only an entire farm can handle. Suitable for both mass production of small detailed products, and for printing huge objects and dioramas. It is equipped with a 15-inch Mono 8K LCD display and has a working area of ​​330x185x400 mm. Resolution - less than 50 microns, layer height - 0.01-0.3 mm.

    Formlabs Form 3L

    nine0003

    LFS-technique with a construction area of ​​335x200x300 mm, creating high-precision details using a 2x250 mW laser with a spot diameter of 85 microns. It is possible to install two cartridges at the same time for uninterrupted printing of large models. Layer thickness - from 0.025 mm.

    Totals

    All 3D printers reviewed have been rigorously tested in practice and tested by experienced engineers.


    Learn more