Home » Misc » London 3d printing cafe

London 3d printing cafe


MakersCAFE - A New 3D Printing Cafe in London

What do you get when you combine 3D printing, laser cutting, comfy seating, good coffee and cold beer? Well, you get a very curious Average Man for a start.

Let’s rewind back a week. A colleague of mine shows me an article in TimeOut magazine about a new place called MakersCAFE opening just 15 minutes from our office. He tells me “you can get stuff 3D printed there” – knowing full well that this would excite me and ruin my concentration for the rest of the day. You see there’s a strong link between the Raspberry Pi and ‘making’, especially with 3D printing as there are so many designs for cases out there.

A quick search online confirms the article – MakersCAFE was a reality and offered everything I had been looking for in recent months. A way to get 3D printing done without spending thousands on machines, software and lessons!

No less than ten minutes later I had emailed the chaps MakersCAFE asking for a bit of a tour/interview to share on my blog.  Founder Soner Ozenc invited me to join them for the afternoon, and even agreed to help me create my first 3D printed item – a Raspberry Pi case!

Read on to hear more about my new favourite London hangout…

Crossing Borders

It was a Friday afternoon that I had scheduled to meet the guys at MakersCAFE. With my office just down the road, I decided to use my (slightly extended) lunch hour to learn all about the coolest new coffee shop in town.

The walk from Liverpool Street to Shoreditch is an interesting one – almost like crossing a border. In the space of a few minutes you transition from the concrete coldness of the city, to the warm, trendy and laid back cooltopia that is Shoreditch.

On a busy crossing half way up Shoreditch High Street, I finally arrived at MakersCAFE.

The 3D printer in the window draws makers in like a magnet

Warm Welcome

Being a bit unsure what to expect, I had a quick glance through the window before entering. A fancy bit of kit got most of my attention, which I assumed was one of the 3D printers (I would later print my own Raspberry Pi case on this). 

MakersCAFE have an Ultimaker2 in the cafe window

Behind this was what I would stereotype as a crowd of ‘design people’, purely because they were wearing much more fashionable clothes than me and looked like they knew what they were doing…some would call this jealousy.

I poked my nose into the door to an instant warm welcome by Cris, the 3D printing expert at MakersCAFE. He quickly invited me to the rear of the store where he had already been reviewing the 3D design I had emailed over earlier than morning.

My design was already on Cris’ laptop when I arrived. Spot on.

 

Cris and the gang wanted to get my project created as soon as possible for me, all part of the MakersCAFE ethos (I’ll cover more on this later). They explained the job and my options to me in a familiar ‘Average Man’ fashion – assuming no prior knowledge and at a level that anyone could understand, which I found really refreshing.  

I handed over some crisp paper money and then proceeded to sit down with MakersCAFE’s founder, Soner Ozenc, whilst Cris and the team prepared my item for print.

3D Founder

With the big media players such as BBC News, TimeOut magazine and the Evening Standard all recently reporting on the cafe, I was grateful that the founder made some time for a feature on my ‘Average’ blog, especially considering they’ve only been open a couple of weeks.

Soner introduced himself and led me to the middle section of the shop which is kind of a mix between a coffee shop and somewhere to work on thoughts, designs and makes. It has a laid back calm atmosphere with that warm whiff of coffee beans which felt like the perfect place to meet with fellow makers.

The middle room is a comfy place to work on projects

I came armed with a list of questions eager to find out more about Soner, MakersCAFE and 3D printing in general.

Soner’s story has no odd twists or turns, in fact, you can really see how his history led to him to found MakersCAFE. Originally a product designer – Soner set up a product design studio soon after graduation. This history is embedded into the MakersCAFE via the lampshades and mirrors around the shop which he designed and manufactured himself:

Soner’s CMKYshade

Soner has his mirror design collection in the store too

 

With the experience from this, in 2006 he set up laser-cutting firm RazorLab, the UK hub for Ponoko which prides itself on being “The World’s Easiest Making System”. This regional ‘hub’ setup cuts fees, postage costs and most importantly – time. This ethos is clearly a big part of MakersCAFE as well. 

The next project was MakersCAFE. Around 2 years ago Soner purchased MakersCAFE.com with the intention of eventually creating a place for makers to gather, discuss, learn, share and make (and clearly he did!).

Soners impressive record as a mechanical engineer, product designer, web developer and now Barista make him the perfect kind of person to start something like this.

International Maker

One thing that was clear from our discussion is that Soner isn’t the kind of guy to sit still.

With the Shoreditch location being the proof of concept for MakersCAFE, we discussed what was next for the brand. Soner explained that he plans to create new branches in New York and Sydney. Following this, franchising out to the rest of the world would be the next step. No stopping this guy!

All Things ‘Make’

Naturally I was keen to bring up the Raspberry Pi and we soon got talking about the link between MakersCAFE and the popular micro-computer. 

Soner explained how the MakersCAFE is for ‘anything to do with making” and not just getting 3D printing/laser cutting work done. He talked about how some people simply just come, grab a coffee and ‘3D print watch’ – I guess it’s a bit like bird watching for the modern age. The MakersCAFE welcomes all forms of maker to meet, collaborate, share ideas, prototype and get a good brew at the same time – with no obligation to do any printing/cutting.

An interesting wall defining ‘Making’

 

Workshop & Events

Our discussion about different maker types soon moved to one of the other sides of MakersCAFE – events.

The room we were sitting in (middle room) turns into a workshop/event venue after 6pm, with regular talks, workshops and even parties. Soner sees it almost as a social responsibility that the cafe educate and share knowledge on making as much as possible. He asked me if there was perhaps something I could do on the Raspberry Pi – something that’s had me thinking ever since I got back from the cafe. Watch this space…

The Cafe

So what exactly can you get made at MakersCAFE?

The one we already know about is 3D printing. The cafe has a number of 3D printers dotted around the building, an even one in the main window.

The main counter with a collection of machines

Just behind a couple of these 3D printers was a food-based printing machine. A 3D print style machine that can make real, edible food. Yes really! During my chat with Soner he mentioned that he wanted to change the perception of manufacturing from the cold/dirty/smelly factory scene, to somewhere warm and inviting where you can order a pop-up dinner to be 3D printed right in front of you.

A 3D food printer. I’ve seen it all now…cutting edge stuff!

Within the main counter itself is a laser cutter. Soner explained that jobs of pretty much any size can be catered for, however larger stuff goes to a top secret location to be completed.

An interesting looking project being cut at MakersCAFE


A Little Help From My Friends

The whole time I was there, I couldn’t help but feel somewhat inadequate. Being 100% average, I have no software or skills to design anything that could be made on these fascinating machines. But this is the great thing about MakersCAFE and the 3D printing scene – you don’t need to have the software or skills.

I was tempted to ask ‘owl’ much this would cost…

With Soner’s team of experts, the cafe offers an optional consultancy service to help you with your design. People like Cris (the 3D printing top boy) for example, could help you tweak your design, offer advice and provide technical knowledge and experience that will more than likely save you money in the long run. They even mentioned that they want to get to a point where you could come in with an object and simply ask for one of the team to design it in the 3D software for you.

Obviously this comes at a price, and at MakersCAFE it’s a simple and clear £1 per minute.

Free Designs

Another way of getting around this pure lack of talent is Thingiverse. You what? Yes ‘Thingiverse’ – it’s a website where ‘makers’ log in and share their designs with the rest of the world, and i’m pretty sure 99% of them are free to download and use, and even modify if you have the necessary software.

Find all sorts of good stuff at Thingiverse!

At first you might wonder why you would want someone else’s design that they made for their own tastes and needs, however there are simply thousands of designs on there to be picked up and printed. In relevance to this blog, a quick search for “Raspberry Pi” brings up a huge list of innovative case designs.

For this article I was desperate to see something being printed and also really wanted to have a souvenier to take away, so I downloaded this Raspberry Pi Exoskeleton case design from Thingiverse made by a chap called Jose Torre.

The two separate parts to make up my Raspberry Pi case


Cris and the team were already setting up my case to be made whilst I was having a chat with Soner, so the next part of my tour was to watch my case being made.

Pi Print

Cris is the in house 3D expert at MakersCAFE, so he walked me through the process of how we would turn my design file into a 3D printed object.

I got the impression that Cris is one of the very small percentage of people who genuinely loves going to work – he has a permanent smile when talking about anything to do with 3D printing. I was filled with jealousy the whole time I was there, mindful that I had to soon return to my soulless city office.

After loading my file into the machine (an Ultimaker II), the base plate is put in place with a sort of adhesive on it that helps the initial layers stay in place during the printing process. Cris then started the machine and set it to make my design:

Cris setting up the print – note the Pebble watch


After a few minutes waiting for the machine to warm up, the Ultimaker kicked into action and started with a test ‘blob’ and then continued to outline my case:

I was amazed at how thin and yet accurate the material was laid down

My case was being made at the ‘Rapid’ 210 micron quality setting, which is the fastest and cheapest option that MakersCAFE offer. Cris explained the different options, and why you might want to pay more for a lower micron level for a smoother end product. It all depends on what you’re making, your budget, and kind of the object’s application in the real world.

 

It wasn’t too long before the machine had made progress on my case, and I could see the end result generating right before my eyes. Despite opting for the rapid setting, it would still be a few hours before the case would be finished. There is no obligation to be present when getting something printed, so I took a few more pictures and then headed back to work.

I can see why some people just watch 3D printers – fascinating!

Here’s a video of it being printed:

When in Rome

Work finished at around 5pm. The cafe is open until 6, so I took a casual stroll back through Shoreditch to collect my finished item.

I arrived to find Cris still seemingly loving every second of his employment, helping a few guys with their key holding design prototype. Maybe his easy access to good strong coffee helps with his enthusiasm?

Cris handed me my finished case and invited me to take a seat to look at it, work on my blog or whatever else I might want to do. I really love the casual nature of this place!

My finished case – looks great even with the high micron setting


Now, let’s take a look at my scenario. It’s Friday night, in London, with the wife not expecting me home any time soon. Add to this equation the fact that MakersCAFE have an alcohol license, and I’m looking to celebrate my 3D success…and you can quickly see where I’m going here…

…time for a pint!

3D printing and beer – that’s all my boxes ticked

 

I stayed for a beer, and kicked back watching the various groups of people working away at their designs and prototypes. I decided it was a good time to have another look at Thingiverse on my phone for the next ‘thing’ I would get made here.

A few of the MakersCAFE team came over for a chat, answering a few last questions that I had before I finally packed up and left for home.

When I arrived back at Average Towers, I quickly grabbed one of my Raspberry Pis and the M3x30 bolts that I had ordered in for the case (as instructed by the Thingiverse description) and put it all together. Here is the end result:

The Pi fits great in this case and is a really unique design

Summary

I had a great afternoon at MakersCAFE and I really can’t wait to get back there for another fun-filled printing session. 

If you think 3D printing is one of those inaccessible expensive things that the average man can’t get involved in – think again. With sites like Thingiverse offering thousands of free designs, and MakersCAFE entertaining any kind of project big or small – there’s really no reason to fear this great new technology. Even just rocking up for a coffee and to watch other people ‘making’ is a great way to learn more.

People enjoying a decent brew at MakersCAFE

MakersCAFE offers an inviting and inspiring space for makers of all types to come together, collaborate, share knowledge, make and get a decent drink at the same time. I’m pretty sure MakersCAFE caters for pretty much any and every hobby out there – so get yourself down there and go make!

You can find MakersCAFE at www. makerscafe.com – but I’d definitely recommend popping down in ‘3D’ for a coffee at:

MakersCAFE
Old Shoreditch Station
1 Kingsland Road
London
E2 8DA

See you there!

Average Man

makersCAFE Opens in East London - Drink Coffee, 3D Print, Laser Scan, Chat and Learn - 3DPrint.com

Whenever a new technology begins to enter the mainstream, the general public naturally takes an interest in it. In the past year or two, the amount of media coverage surrounding 3D printing has sky rocketed, all the while, the majority of individuals have very little idea about how 3D printing actually works.

Wouldn’t it be great if there was a place in town where one could go, and see an actual 3D printer in action, touch it, and even use it to print something out? Well, a man named Soner Ozenc thought so too, and thus has opened London’s first Makers Cafe. Located in the Shoreditch area of east London, the Cafe opened its doors just two days ago.

According to the company, “Makers Cafe is a space for makers, wonderers, tinkerers, the designers and creatives in general. For those of us who need our caffeine while cultivating these fragile ideas.”

The idea for such a venue has been around for a while now. In fact, there are similar cafes located in Germany, Spain, and China. Ozenc takes many of the ideas from these cafes and incorporates his own touch. Being the founder of RazorLab, an online design studio which allowed users to upload their own designs and have the company etch or laser cut them for a fee, Oznc certainly isn’t foreign to the design services industry.

Grand Opening Thursday, outside makersCAFE

The premise behind his new cafe is simple. Those wishing to use the computer aided technologies such as 3D printers or laser cutters, whether it’s their first time, or they are ‘pros’, they can come in, and pay a fee of £1 per minute ($1.66) to rent time on the cafe’s machines. Perhaps some people just want to come and watch the machines in action while enjoying a barista style coffee and chatting it up with friends or colleagues, while small businesses could use the venue as a sort of self-serve three-dimensional print shop.

Have you ever been to a coffee shop, chatting it up with friends, when an amazing idea popped up? At makersCAFE, that idea may actually be able to become a reality through the use of their machines.

“Customers will have a chance to see the actual machines and the idea is they will come with their ideas and will witness their ideas becoming physical objects,” Ozenc told the IBTimes UK.

That’s not all though.  Ozenc plans on having all sorts of interactive social gatherings at his cafe, which include workshops, guest speakers, and even parties.

“In the daytime, people can come in to have their items laser-cut or 3D-printed, but after 6pm, makersCAFE will be running workshops, talks and parties to make digital manufacturing more accessible to the public,” Ozenc added.

For those in the London area who are considering stopping by, the makersCAFE is open the following hours each day:

  • Mon – Fri: 9:00 am – 6:00 pm
  • Sat: 10:00 am – 5:00 pm
  • Sun: 12:00 pm – 5:00 pm

Let us know if you stop by makersCAFE in London, and what you thought. Discuss in the Makers Cafe London forum thread on 3DPB.com.

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.

Tagged with: 3d printing cafe • london 3d printing • makersCAFE • makersCAFE london

Please enable JavaScript to view the comments powered by Disqus.

Page does not exist Error 404

The address was entered incorrectly, or the page no longer exists on the site. Go to the main page or use the search

  • Paint by numbers
    • Patriotic paintings and Ukraine
    • Cities of the world
    • Flowers and still lifes
    • Landscapes and nature
    • Sea and ships
    • Land animals and sea creatures
    • Cats and dogs
    • Birds and butterflies
    • New Year
    • Romance and love
    • People and celebrities
    • Icons and religion
    • Children and angels
    • Cars, planes, space
    • Paintings for the kitchen
    • Abstraction and other subjects
    • Coloring pages for children
    • Paintings for adults
    • Triptychs and polyptychs (of three or more paintings)
    • TOP paintings by numbers
    • Paint by number Ukrainian theme
    • Paint by numbers clock
  • Painting by numbers without box
    • Bouquets and flowers
    • urban landscape
    • Couples and lovers
    • people and portraits
    • Icons and Christmas
    • Children, fairies, angels
    • Mountains and nature
    • Animals and fish
    • Dogs and cats
    • Butterflies and birds
    • Seascape
    • Abstraction and Feng Shui
    • For children
    • Space and machines
    • Coffee and cuisine
    • New Year and snowmen
  • Paint by number
    • Diamond embroidery
      • Flowers and bouquets
      • Still life, fruits and vegetables
      • Tea, coffee and cups
      • Peacocks, swans - birds
      • Cats, wolves - animals
      • Paris, London - cities
      • landscape and nature
      • Sea and ships
      • People, girls, couples
      • Icons and amulets
      • Children, angels, metrics
      • Children's mosaic
      • Hunting and fishing
      • Butterflies and magnets
      • Zodiac signs
      • New Year
      • Diamond Mosaic Patriotic
      • Diamond mosaic images
      • Sale of diamond embroidery