Home » Misc » Keyence 3d scanner

Keyence 3d scanner


3D Scanner | KEYENCE America

VL Series 3D Scanner CMMs can measure large targets in 3D from all directions, providing full 360° scanning capability. The motorized turntable moves in the X, Y, and θ directions for fully automated recognition and scanning of the measurement target. The high-magnification lens captures up to 16 million data points, allowing for the acquisition of precise data on small targets and complex shapes that cannot be measured with conventional scanners. Full 360° scans can be compared directly against CAD data, allowing for easy detection of deviations from design values, quick determination of good vs. bad parts, and wear analysis before and after use of a product.

Catalogs Price

Features
3D Measurement of Large Targets in Their Entirety

The VL-500 automatically recognizes the size of the object and adjusts the scan range to collect data over its entirety.

3D Measurement of Complex Shapes with High Accuracy

By incorporating both low and high magnification lenses, the VL-500 is able to acquire up to 16 million points per scan, capturing finer details even on smaller objects.

The VR-6000 Optical Profilometer performs non-contact measurement to replace stylus profilometers and roughness meters. This 3D profile system captures full surface data across the target with a resolution of 0.1 μm, enabling measurement of features that cannot be performed with probe-type instruments. The new rotational scanning greatly expands the measurement capabilities of the system. True-to-life cross section measurements can be performed with no blind spots. Wall thicknesses and recessed features can be measured without cutting or destroying the target. In addition, the HDR scanning algorithm provides enhanced scanning capabilities for instantly determining the optimal settings to capture high quality data, even on glossy and matte surfaces.

Catalogs Price

Features
Rotational Scanning on a Wide Variety of Materials

A 3D profilometer can be used for a wide range of applications across multiple industries. Examples of materials that can be analyzed using a surface profiler include medical devices, jet engine turbine vanes for the aerospace sector, and valve trains found in automotive manufacturing. Using a 3D surface profilometer in these contexts means you can get accurate measurements of material thickness and detection of defects without the need for the instrument to come into contact with the object. Unlike conventional surface roughness profilometers, parts can be rotated to scan surfaces that would not be accessible otherwise. These qualities and capabilities make these devices ideal for collecting measurements and inspecting precision components such as batteries, circuit boards, and stamped metal parts.

HDR scanning algorithm enables measurement of more materials

Automatic rotation to perform measurements with no blind spots

Measure Nearly Any Callout with a Single Device

There are numerous measurements that can be taken with a 3D profilometer. For example, this system can be used to record the profile of a target by tracing its surface, enabling measurement of 3D features and surface roughness. It can also capture 2D data to measure lengths, widths, and angles. A 3D profilometer also creates a computer-generated 3D model of the object for visualization of the overall shape, while still maintaining a high resolution to observe minute surface features.

Capture full surface data with 0.1 µm resolution in just 1 second

Consolidate multiple measurement systems into one device

A 3D scanner is a device that acquires 3D coordinate data from a target and converts it into 3D digital data. There are two main scanning methods used by 3D scanners: contact scanning, where a probe or sensor comes into physical contact with a target to acquire coordinate data directly, or non-contact scanning, where a laser or other non-contact device is used to acquire 3D data.

How Contact-Type 3D Scanners Work

With a contact-type 3D scanner, measurement is performed by touching a probe or sensor to the target to acquire the 3D coordinates of the contact location, and those coordinates are then converted into 3D data. Although this is an older method, it offers accurate results because the coordinates are obtained from directly contacted locations. Also, because many targets can only be measured through contact, this type of scanner has been used in a wide variety of worksites. Although contact-type 3D scanners offer excellent measurement accuracy, measurement must be performed in a temperature-controlled environment, and measurement can take a long time, so measuring large targets and completely scanning complex shapes can be difficult or impossible.

How Non-Contact 3D Scanners Work

Non-contact 3D scanners measure targets using a laser or other light source, and the measurement results are converted to 3D data. There are two types of non-contact 3D scanners: those that use lasers, and those that use projected light patterns.
Scanners that use lasers irradiate a target with a laser beam, and the reflected light of the laser is then detected by a CMOS sensor or other device. The coordinates are then obtained by measuring the time difference and reflected angle of the light. On the other hand, scanners that use pattern light projections shine light onto a target in a striped or other pre-determined pattern, and a camera detects any displacement or distortion in the lines to determine the shape of the target.
Laser-based scanners offer detailed coordinate information, while pattern light projection scanners are known for their ability to quickly measure a wide area. These scanners are also ideal for use with targets that may change shape due to contact with a probe or other device. However, a disadvantage of these scanners is that the reflected light may change depending on the material and shape of the target, which can make it impossible to determine exact coordinate information. There may also be blind spots on the target where the camera cannot detect the light. Also, if the camera or projector used to detect the reflected light is positioned at an angle or misaligned, reading the exact shape of the target will be impossible.
With non-contact 3D scanners, coordinates and shapes are calculated from the position and angle of the projected light from the projector and of the camera detecting the light, or from the position of the laser and the CMOS sensor detecting the reflected light. This means the position of each component must be correct, so calibration is required when the equipment is moved or subjected to sudden shaking (such as from heavy machinery operating nearby) or thermal shock. With KEYENCE’s VL Series, calibration is as easy as placing the dedicated calibration board in the field of view and pressing a button. This makes it possible to immediately perform on-site adjustments as needed.

Laser scanning method
A: Laser beam B: CMOS sensor

Pattern light projection method
A: Projector that emits patterned light

3D scanners can measure in both 3D and 2D with easy operation. Set-up and measurement operations are simple, so anyone can measure complex objects with high-accuracy. 3D measurement scanners can measure cross-sections, thickness, and perform GD&T measurements in a single scan.

With conventional measurement systems, many setup steps are required, such as fixturing, stage adjustments, and precise placement of the measurement target. However, with a 3D scanner, an operator is only required to place the target object on the stage and measurement can start right away. Additionally, because the entire surface is scanned, a 3D scanner can perform nearly limitless measurements, including measuring the highest and lowest points across a surface, distances between lines, and distances between circles or other features.

Target objects can be compared directly against 3D CAD data, or against measurement data from a similar part. Comparing target measurement data can help verify conformity and identify defects.

Comparing a 3D scan against the object's 3D CAD data enables visualization of any differences between the final product and the design. Objects that are difficult to measure with conventional approaches, such as parts with free-form shapes or complex geometries, can be quickly compared against CAD data to instantly visualize any areas the part is out of tolerance. Additionally, different sets of measurement data from the same product can also be compared, which allows for capturing changes in the shape of the product before and after use, or for identifying why one part may be working while another is failing.

Reverse engineering analyzes existing products to reveal their specifications, components, and design. A 3D scanner can recreate the shape of a product with high data quality, enabling drawings to be quickly made for already existing products.

Reverse engineering helps determine the manufacturing method and working principle of a product by analyzing the product itself or its components. A 3D scanner can accurately analyze, dimension, and create drawings or DXF files of even complex shapes and products. With the ability to quickly measure objects regardless of their complexity, 3D scanners are optimal measurement systems for reverse engineering.

In recent years, additive manufacturing using 3D printers has become increasingly popular. Similarly, 3D scanners have become increasingly used within the 3D design and printing process due to their ability to quickly create digital models of existing objects and parts. This process of using existing parts to create new designs is referred to as reverse engineering, and can save both time and effort in the following situations:

1. A customer has requested a part design but does not provide a drawing. 2. The customer provides only an existing part for reference, but not the design file or drawings. 3. You are required to make a part that is different from the drawing but has the same general shape as a proven part. 4. Only paper drawings exist of old parts.

Stamping Industry

Metal and plastic materials have plasticity and elasticity that affect the way they are worked, and as such, making industrial products to design specifications can be incredibly difficult. To assess the shape of a product, the entire part must be scanned with a 3D scanner.
With a 3D scanner, measurement of deep drawn products, spring back analysis, and plate thickness evaluation can be easily performed. Profile measurement of deep drawn products can be done by visualizing the part against its CAD data, while spring back can be analyzed by measuring the difference from cross-sections. In addition, hand tools cannot capture the thickness of a bent part or changes in thickness caused by metalworking, but a 3D part scanner can capture the rate of reduction of plate thickness across the entire part.
For the 3D Scanner for the Stamping Industry Application Guide, click the button below.

More Details

Injection Molding Industry

Injection-molded parts can be difficult to measure due to their freeform geometries and can deform when measured with contact tools. 3D Scanners allow for a wide range of measurements to be performed on molded products, including radii, flatness, and curvature. Warpage caused when the part is removed from its mold can be quickly and accurately measured across the entire part. Additionally, samples from different molds can be scanned and the data superimposed so differences can be instantly understood.
For the 3D Scanner for the Injection Molding Industry Application Guide, click the button below.

More Details

Casting Industry

Due to the limited number of data points captured, measuring systems that collect point data may overlook non-conformities that would otherwise cause measurements to fall outside of dimensional tolerances. A 3D scanner can be used to acquire scan data for the entire product to evaluate its true shape.
With a 3D scanner, it is easy to evaluate the shapes of the fins of alternators and heat sinks, as well as to measure the positions of electrical parts. When evaluating the shape of an alternator, the CAD data can be directly overlayed on the 3D scan to identify any non-conformities. Additionally, the fins of a heat sink can be virtually cut into cross-sections to measure their pitch and height, without destroying the part.
For the 3D Scanner for the Casting Industry Application Guide, click the button below.

More Details

Pressed Parts: A Method for Measuring the Thickness of Drawn Products

Because defects in wall thickness and minimum thickness affect the strength of drawn products, highly accurate and quantitative 3D shape measurements are necessary. However, it is very difficult to accurately measure with minimal variation between operators when using coordinate measuring machines or calipers. The easy-to-use VL Series 3D scanner CMM accurately captures the entire 3D shape of a surface without contacting the target, allowing users to automatically measure thickness and minimum thickness. Furthermore, cross-sectional shape displacement can be checked with profiles, allowing for the identification of issues such as springback and the quick implementation of corresponding countermeasures.

More Details

Cast Products: A Method That Allows Anyone to Measure Cast Products Easily and Accurately

3D shape analysis is vital in quality assurance because cast products with dimensions outside the tolerance range can affect the strength and operation accuracy. Using a coordinate measuring machine that captures one point at a time requires a lot of time and a high level of skill. On the other hand, the VL Series 3D scanner CMM captures the data in minutes at the click of a button, enabling highly accurate measurement of surface strain and complex 3D shapes. Easy quantitative evaluations are made possible by visualization of uneven surfaces with color maps, capturing of profile data, 11 types of GD&T measurements, and comparisons with 3D-CAD data.

More Details

Plastic Molded Parts: A Method of Accurately Measuring Plastic Molded Fitting Parts

Plastic molded parts with complex shapes conventionally required multi-point measurements with coordinate measuring machines and calipers. It not only required a lot of time and a high level of skill but also had the problem of measurement variations when performing contact measurements due to the low hardness of plastic. The VL Series 3D scanner CMM can complete a 3D scan of the plastic molded part on the stage in minutes without touching the target, allowing for highly accurate measurements. Uneven surfaces can be visualized with color maps, specified cross sections can be measured in a non-destructive manner, and differences between 3D-CAD data and the target can be visualized. Defects such as subtle warpage, waviness, strain, and short shots can be easily identified, allowing for prompt implementation of countermeasures.

More Details

Cut Products: A Method for High-accuracy Measurement of Free-form Surfaces on Cut Products

The 3D shapes of impeller blades, propellers, and spiral gears—cut products having free-form surfaces—are difficult to measure quantitatively with coordinate measuring machines, tooth thickness calipers, and tooth thickness micrometers. The VL Series 3D scanner CMM can complete a full 360° scan of the target in minutes and with simple operations, allowing for highly accurate and quantitative measurement. Specified locations can be measured in the specified manner, for example, the thickness, pitch, curved shapes, and GD&T of impeller blades. Verification against 3D-CAD data is also possible. Additionally, the profile of the specified cross section can be measured in a non-destructive manner when measuring the over-pin dimension of a gear.

More Details

A Method of Optimizing 3D Measurement in Reverse Engineering

In reverse engineering, where design drawings are reproduced from actual products and parts, it is necessary to measure the shape of the entire target with high accuracy. The VL Series 3D scanner CMM scans the target in a non-contact manner. It captures 3D shape data with high accuracy, simple operations, and no positioning or leveling. Because data can be combined, surfaces that were not fully captured at the first scan can be scanned and added at a later time. Furthermore, non-destructive measurement and analysis of cross sections as well as output as DXF data are possible. This all adds up to allow dimensions to be quickly evaluated and converted to drawings.

More Details

A Method for Improving the Efficiency of 3D Measurement for Digital Archives

When building a digital archive, a tangible fixed asset, the shape and color information of the original items must be measured and recorded in as much detail as possible. Non-contact and fast 3D scanning with the VL Series 3D scanner CMM is useful in capturing the data of these valuable and fragile original items. The cross-sectional shape of the specified location can be measured in a non-destructive manner from the 3D shape data and converted to DXF data or an STL file. Also, the color information can be captured with the built-in, large, high-resolution CMOS camera. The data necessary for building a digital archive can be captured quickly, with high accuracy, and with simple operations.

More Details

3D scanning accuracy normally ranges between 10 - 100 microns. 3D scanners typically excel at measuring large parts that do not contain small surface features, as the accuracy isn't high enough to obtain high-resolution surface shape data. With the VL Series, high-magnification lenses can be used to capture up to 16 million data points on the surface of a part, ensuring even small features or targets can be accurately measured.

3D scanning is a non-contact form of measurement that captures the three-dimensional shape of a target object through the use of a projected light source. Optical scanners typically project a white or blue striped pattern onto the target object, and measure the displacement of the lines to construct the 3D model. A 3D laser scanner projects a laser onto the target surface, and measures the time required for the laser to return to the light-receiving element to map the surface of the part. Both white/blue light 3D scanners and 3D laser scanning systems can be used to perform measurements

3D scanners are used to acquire data on target objects so the user can visualize and measure the surface of the object. Some 3D scanners allow scanned objects to be directly compared against their CAD model, so users can quickly understand how a manufactured part differs from the design. 3D scanners are used in quality control and research and prototyping across many industries, including stamping, molding, casting, and electronics.

When considering a 3D scanner, the scanner must be able to meet the specifications necessary for producing the desired data. The following section introduces four key points to consider when looking to introduce a 3D scanner.

Measurement Method

3D scanners can either be contact-based or non-contact. Contact-type 3D scanners are used for inspecting and measuring targets when high accuracy is required. Non-contact scanners can quickly acquire 3D coordinate information by scanning over a wide area all at once, even for targets with complicated shapes. Because of this, non-contact scanners are also used for scanning large structures and cultural assets that cannot be touched directly.

Accuracy

When it comes to 3D scanner performance, accuracy is an important aspect to consider, not only in terms of the coordinate acquisition accuracy but also in the number of scan locations with more complicated shapes. Each manufacturer follows its own standards for accuracy, including repeatability and minimal variation between point groups, so checking whether the accuracy of a device is appropriate for the application is important. KEYENCE’s 3D scanners also offer various functions for visualizing differences from actual products, including CAD comparison and comparative measurement.

Resolution

Scanners with high resolution can capture more informative, accurate, and realistic 3D data. However, data loads increase at higher resolutions, so processing takes longer. This means users need to decide whether to prioritize speed or resolution. Still, some products may offer the same resolution but faster data processing speeds, which can help improve operation rates.

Ease of Use

3D scanners can be either stationary or handheld devices. Stationary scanners are fixed in place and do not shake during scanning, ensuring accurate coordinate information is obtained. These devices are used for more time-consuming scanning processes. With a KEYENCE 3D scanner, however, scanning can be started at the press of a button, while settings can be configured just by selecting the necessary items.
On the other hand, handheld scanners can be used in any location, but these devices are more prone to camera shake because the probe must be held by hand during scanning. The greater freedom of movement also makes it possible for users to obtain more detailed coordinate information.

In addition to ease of use, a product’s after-sales support is also an important factor for ensuring continued use. KEYENCE is dedicated to providing a comfortable environment for anyone using its 3D scanners, including providing operation support, offering product inspections, and lending equipment as necessary if a malfunction occurs.

We have led the way in industrial automation and inspection equipment since 1974. Our commitment to advanced technology and meeting our customers' needs have elevated us to a leadership position in the marketplace. If you're ready to buy 3d scanners from the recognized leader in the field, browse our catalog and get in touch today.

3D Scanner - VR | KEYENCE America

First Name (required)

Last Name (required)

Newsletter

YES! Email with the latest product news, tips, and application guides.

Country (required) AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAntigua and BarbudaArgentinaArmeniaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBosnia and HerzegovinaBotswanaBrazilBruneiBulgariaBurkina FasoBurundiCambodiaCameroonCanadaCape VerdeCentral AfricaChadChileChinaColombiaComorosCongo, Democratic Republic ofCosta RicaCroatiaCubaCyprusCzech RepublicDenmarkDjiboutiDominicaDominican RepublicEast TimorEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFederated States of MicronesiaFijiFinlandFranceFrench GuianaGabonGambiaGeorgiaGermanyGhanaGreeceGrenadaGuatemalaGuineaGuinea BissauGuyanaHaitiHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsraelItalyIvory CoastJamaicaJapanJordanKazakhstanKenyaKiribatiKoreaKuwaitKyrgyzLaosLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacauMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMauritaniaMauritiusMexicoMoldovaMonacoMongoliaMontenegroMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNew ZealandNicaraguaNigerNigeriaNorth KoreaNorwayOmanPakistanPalauPanamaPapua New GuineaParaguayPeruPhilippinesPolandPortugalPuerto RicoQatarRepublic of CongoRepublic of KosovoRomaniaRussiaRwandaSaint LuciaSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSpainSri LankaSt. Christopher and NevisSt.Vincent and the GrenadinesSudanSurinameSwazilandSwedenSwitzerlandSyriaTaiwan R.O.C.TajikistanTanzaniaThailandTogoTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTuvaluUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVatican CityVenezuelaVietnamYemenZambiaZimbabwe

Company Name (required)

Address (required)

City (required)

Zipcode (required)

Top 10 Russian cases of 3D technology implementation

Over 15 years of operation on the market, iQB Technologies has accumulated extensive and valuable experience in the field of 3D technology implementation. Our experts study the world's best practices and monitor the development trends of the 3D industry, constantly improving their skills.

In this article, we have collected the most interesting Russian case studies that clearly demonstrate the benefits of using additive technologies and 3D scanning in various industries, including automotive, aerospace and petrochemical industries, construction, and jewelry. These projects were carried out by iQB Technologies experts and our Russian partners.

Breakthrough in Russian engine building: 3D-printed combustion chamber

Queen

Task

Optimization and testing of the combustion chamber of a small gas turbine engine TA-8 used as an auxiliary power plant of the TU-134 aircraft, within the framework of the Samara University project in partnership with the leading enterprises of the engine building complex.

Solution

  • Production of combustion chamber elements on an additive plant SLM 280HL from domestically produced powders.

  • Before testing, about a hundred prototypes were printed, their structure and mechanical properties were studied using different modes of selective laser melting.

Result

  • Production time is reduced to one week (with traditional production - 6 months).

  • Obtained characteristics commensurate with the capabilities of classical technologies, and in some cases exceed them.

  • The university can produce 30 new engines per year for use in drones and autonomous power plants.

Geometry control of bridge section structure

iQB Technologies project for Mostostroy-11 JSC (Tyumen)

Task

Control of each section of the bridge for geometry deviations, 3D scanning of bridge elements directly in the workshop.

Solution

Using the FARO Focus S150 3D ground laser scanner and Geomagic Control X software.

Result

  • Improve assembly accuracy and high data confidence (model error as low as 1. 6 mm).

  • Reducing the chance of human error.

  • Ability to check all components of the structure, not just individual elements.

  • Higher quality of the inspection operation: thanks to the digital model, many more dimensions and parameters can be traced.

  • The ability to assess the flatness of a sheet or the perpendicularity of one object to another, which is not possible using traditional measurement methods.

Reverse engineering of the transmission case

iQB Technologies project

Task

Restoration of the technical documentation of the clutch housing of a rare car.

Solution

A 3D scan of an object measuring 250 x 550 x 100 mm was carried out with an accuracy of 0.1 mm, then reverse engineering was performed in the software. Creaform HandySCAN 3D 3D scanner and Geomagic Design X software product are involved in the project.

Result

Degradation resistant pump impeller

Project of Voronezhsintezkauchuk JSC (part of SIBUR Holding)

Task

Optimization of the impeller of a centrifugal pump, which is made of stainless steel and quickly fails under the action of the pumped liquid.

Solution

  • Using a 3D scanner and CAD systems, a 3D model was designed for dimensional alignment.

  • Based on a 3D model using the technology of selective laser sintering (SLS) of polyamide powder, an impeller was made.

Result

  • Unlike the stainless steel product, there is no degradation in the plastic wheel.

  • New wheel provides the same performance as the original.

Aircraft tail tip control

iQB Technologies project

Task

Fixing the quality of Airbus aircraft tail fin restoration in the form of a geometry violation report.

Solution

Using Creaform HandySCAN 3D, a 3D scan of an object measuring 1650 x 850 x 1250 mm was carried out with an accuracy of 120 microns, then geometry deviations were controlled in the Geomagic Control X software.

Result
  • The 3D scanning process took 3 hours, resulting in a high-poly 3D model of the aircraft tail tip in .STL format.
  • For 3 hours, a report was received to control the symmetry of the tail tip deviations with a maximum deviation of 12 mm.

Production of a decorative bas-relief

Project TWIZE

Task

To produce a wall decoration element - a three-dimensional bas-relief for casting plaster through silicone.

Model dimensions: 280 x 144 x 64 mm.

Solution

3D printing with white Formula W photopolymer on a ProtoFab SLA600 DLC laser stereolithography machine.

Result

Ring and brooch second life

iQB Technologies project

Task

Creation of digital copies of valuable jewelry found during archaeological excavations.

Solution

Digitization of ring and brooch with a stationary 3D scanner Solutionix D700, reverse engineering in EZscan software.

Result

  • 3D scanning of jewelry and obtaining high-precision digital 3D models with an error not exceeding 10 microns, which is ten times thinner than a human hair.

  • Master models of products were printed on a photopolymer 3D printer and transferred to a jewelry workshop for casting from precious metals. As a result, products were obtained that are as similar as possible to those found during excavations.

  • Thus, historical treasures have found a second life in the form of jewelry, faithfully recreated using modern 3D scanning and 3D printing technologies.

  • The entire process from scanning to casting patterns took only five hours.

Creating a casting mold in a week

iQB Technologies project

Task

Creation of a reference part (case of railway brake devices) based on a digital model for subsequent casting of a real product.

Solution

  • Digitization of the original product by the Creaform HandySCAN 3D 3D scanner.

  • Reverse engineering in Geomagic Design X software.

  • 3D printed resin and wax models.

Result

Restoration of the facade of the sanatorium building

Project TWIZE

Task

Solution

Result

  • A point cloud of building facades with scanner settings placed in a single coordinate system has been received.

  • Scan data accuracy: 5 mm.

  • Number of scanner settings: 103.

  • Scan time: 1 day.

Bus Body Geometry Control

iQB Technologies Project

Task

  • Control of the final product for compliance with technical documentation.

  • Control of technological equipment, which, due to its large dimensions, cannot be controlled by traditional measuring instruments.

Solution

Result

Creation of a metrological report that showed the presence of geometric accuracy problems in the tooling.

Author Olga Gorobets

Source

Tags:

IQB Technologies, implementation of 3D scan, application of additive technologies, 3D printer, Additative installation SLM 280HL, laser 3D scanner Faro Faro Faro Faro Faro Faro Faro Faro Faro Faro Faro Faro Faro S150 Geomagic Control X 9 Geometry Control Software0003

Attention!
We accept news, articles or press releases
with links and images. [email protected]

Cases

Partners

Application:

All 3D archiving art and culture quality control science and education reverse engineering and design photogrammetry

Industry:

All aircraft industry auto industry the medicine production shipbuilding jewelery

3D Scanner:

All RV NEO RV PRO RV Spectrum


RV PRO photogrammetry auto industry

The use of 3D scanning in car tuning

Modern 3D technologies are widely used in the automotive industry. 3D scanners are used not only at the stage of car design, but also in the implementation of repairs and auto-tuning. The new technology has become a real breakthrough in the market, because earlier...

RV PRO reverse engineering and design auto industry

3D scanning of an electric vehicle as part of the R&D process with RangeVision PRO

In this article, we will describe how Top3dShop scanned an electric vehicle for EVTech using the RangeVision PRO 3D scanner. The aim of the project was to change the design, as well as

RV Spectrum science and education

RangeVision Spectrum helps St. Petersburg State University scientists to 3D scan fossil pangolin skulls

St. Petersburg State University scientists used the RangeVision Spectrum 3D scanner to scan ancient casts of fossil pangolin skulls. We tell you why it was necessary and what they did

arts and culture

3D scanning makes it easy to create art objects

Stieglitz Academy students use the RangeVision 3D scanner in arts and crafts. Plasticine blank turns into a gilded sk...

RV PRO reverse engineering and design auto industry

Maserati Levante transformation into funeral car

Funeral processions can hardly be organized without the use of a ritual car. Event level, status and preferences of relatives rendered...

RV Spectrum reverse engineering and design auto industry

How to Solve Shelby Cobra Body Geometry Problems with RangeVision Spectrum 3D Scanner

We will never know the name of the person who first decided to create in his garage a copy of the desired car, which was not possible to buy .

Learn more