Home » Misc » Iron man arc reactor 3d print

Iron man arc reactor 3d print


▷ wearable 3d printed arc reactor 【 STLFinder 】

Wearable Arc Reactor

myminifactory

A printable, wearable arc reactor based on the Mark I movie version.

Wearable Arc Reactor

thingiverse

This is a wearable version of the arc reactor from Iron Man. Outside of a 3D printer, you will also need a clip and a band of some kind, I got those for a few bucks from Ace's Hardware. You will also need some wiring, a switch, 2 AA's, a battery case...

Wearable Arc Reactor

thingiverse

A printable, wearable arc reactor based on the Mark I movie version. There are already some great arc reactors on here, but I wanted to take my own crack at it. Update: I increased the clearance of the top ring, should be easier to assemble now. I...

Arc Reactor MkII - Wearable

thingiverse

This is a Iron Man Arc Reactor Mk II. It is close to the original (with some modifications of my own), but shallower, in order to be wearable, to have space for the wiring and not protrude too much from the body, looking like the one tony stark...

Wearable Arc Reactor / Stargate

thingiverse

I designed my own and it eventually morphed into a neat ring that reminded me of the famous Stark Reactor (or a Stargate, whichever you prefer). After a couple of tweaks, I printed the bulkier model and poured resin in the upper half, leaving a gap...

Wearable Arc Reactor / Stargate

prusaprinters

There was a gap tight enough that it stayed and I thought it was a cool effect. I designed my own and it eventually morphed into a neat ring that reminded me of the famous Stark Reactor (or a Stargate, whichever you prefer). After a couple of tweaks,...

infinity war arc reactor wearable

thingiverse

This is the infinity war arc reactor, can be wearable , make sure you rotate the reactor holder and the battery/circuit holster for better printing. Check the video at Dr4k0 W0rk5 for more details. ...https://www.youtube.com/watch?v=lAvZ7V_sbFo&t=10s

IRON MAN ARC WEARABLE ARC REACTOR

thingiverse

IRON MAN Arc Reactor mk2

Wearable Arc Reactor LED prop

thingiverse

I created a prop that can house electronics/LEDs and be worn on the chest in the design of the arc reactor from the Marvel movies. Meant to be worn under a shirt and glow through. The cap can be easily twisted off the base to gain access to...

Iron Man Wearable Arc Reactor

myminifactory

This wearable Iron Man Arc Reator is a simple and quick print and easy to assemble, a great addition to your cosplay collection! The Download comes with a Printable Light Diffuse Plate which should be printed in white but paper can be used just as. ..

Arc Reactor 3D model

cgtrader

This is Arc reactor

Arc Reactor 3D model

cgtrader

detailed Arc Reactor model

Arc Reactor 3D model

cgtrader

Arc Reactor modeled in Maya. ...

ARC Reactor 3D model

cgtrader

Iron Man's Arc Reactor

ARC Reactor 3D model

cgtrader

Iron Man's Arc Reactor

Arc reactor 3D model

cgtrader

Arc reactor i made in blender. ...

Arc Reactor 3D model

cgtrader

Realistic 3d model of Arc Reactor. Detailed enough for close-up renders. ... Formats 3ds Max 2013 Vray 3.40.03 FBX 2006 OBJ TX(Textures)

ARC REACTOR 3D model

cgtrader

INSPIRED BY IRON MAN MOVIE IRON MAN ARC REACTOR BY AWESOME SO I DESIDED TO REALTED OF ARC REACTOR MODEL MADE

Arc Reactor 3D model

cgtrader

Arc Reactor Modeled in Blender. ...Preview image rendered using cycles. All parts and materials are logically named. All materials are separate. Arc Reactor from probably Mark I or II Iron Man. ...COmment And Pls Provide suggestions.

Arc Reactor 3D model

cgtrader

Tony stark has heart this proven by arc reactor. Download model and support tony stark.................... ... The ironman

Arc reactor 3D model

cgtrader

The Palladium Arc Reactor Mark III was the reactor used by Tony for six months (the time jump from Iron Man I to Iron Man II) to power his armors and electromagnet in the movie Iron Man 2. It was created to replace the one which was stolen by Stane...

Neopixel Crystal for Wearable Arc Reactor

thingiverse

Modified Crystal of MishaT's design to incorporate neopixels into the wearable arc reactor.

DIY 3D Printed Arc Reactor - Super Make Something Episode 15

thingiverse

STL files to make your own screen-accurate 3D printed arc reactor as featured in Super Make Something Episode 15! You will need to print the following part quantities: 1x PM-1001 Diffusion Ring 10x PM-1002 Coil Spacer 1x PM-1003 Center Ring...

Iron man Arc Reactor Case (wearable)

thingiverse

This is arc reactor case. Parts Arduino board: arduino pro mini 328p 5v LED: WS 2812 5050 rgb led ring 16x Charging module: 18650 charger Button: 3-pin slide switch Battery: 3. 7v lithium polymer battery 700mAh Shoulder belt Arduino cord:...

Two Part Cover for Wearable Arc Reactor

thingiverse

This is a remix of the cover piece (or top piece) of the Wearable Arc Reactor. This modification separates the cover piece into two parts. This allows you print or paint the cover piece using two different colors. ...To match the movie, the outer ring...

Wearable Arc reactor for Electroluminescent Tshirt

thingiverse

This is a 3D printable overlay for my Arc reactor Tshirt. You can buy these tshirts off ebay, or thinkgeek etc, but they kinda look lame if you are not standing in the dark (or if they are switched off- as you will see in the photo). The EL panel...

Wearable Arc reactor for Electroluminescent Tshirt

cults3d

This is a 3D printable overlay for my Arc reactor Tshirt. You can buy these tshirts off ebay, or thinkgeek etc, but they kinda look lame if you are not standing in the dark (or if they are switched off- as you will see in the photo). The EL panel...

Solderless Remix of Wearable Arc Reactor

thingiverse

Step 3: Print the two LED holders from this design Step 4: Assemble the wearable arc reactor like normal. Step 5: Glue LED_Holder3 to Ring2. Remember Ring2 needs to be printed at 95%. Step 6: Put both parts of the LED holder on one of the LED...

Iron Man ARC Reactor - slim and wearable

thingiverse

Ironman ARC Reactor prop I made for Comic-con, only about 1.5cm thick when assembled so thin enough to be mounted in a t-shirt like I did. See "ARC_-_All_Items_Example_only.stl" for reference, don't try and print this one. Do it in parts then...

Arc reactor

grabcad

3D arc reactor

3D PRINTED IRON MAN ANYONE?

The charismatic, eccentric and playboy Tony Stark, who is also known as the Iron Man, has won many hearts since his on-screen appearance. His witty jokes make him one of the most adored on-screen characters. And is not only because of this he is so loved. His technical knowledge allowed him to create an iron suit to escape his enemy, becoming a superhero.

Of course, Tony Stark would not have missed the chance to gain additional popularity by disclosing that he was the man wearing the armoured suit and jumping in the heat of fights and battles against villains.

Iron Man became a legend overnight. Every little boy dreams to be like him, every man envies him. After 3 Iron Man-centered movies and 3 more Avengers movies, Iron Man is on top as never before.

In order to keep on track with the trend, he compiled a list of 3D printed Iron Man items. Here, you will find 3D printing ideas for the Iron Man helmet, boots, arms, armour, and even the entire suit. If there’s something we failed to cover, do let us know and we will try to include the items in the list. Starting from head to toe, here we go!

3D Printed Iron Man Helmet

You will probably find tens and even hundreds of 3D printed Iron Man helmets online. There are some good, there are some … not so good. Since 3D printing evolves every year, you will be happy to know that 3D printing a fitting and wearable helmet of Iron Man is no longer a Mission Impossible. In fact, this Mission is very possible and with some additional electronics, you can achieve some pretty cool results. Like Ryan Brooks did.

Brooks managed to recreate the Iron Man helmet in every little detail. It has a lowering jaw which makes putting the helmet on easier.

The mechanism that the 3D printed Iron Man helmet is provided with is made by Brooks himself. It looks pretty awesome for a 3D printed piece.

3D Printed Iron Man Arms

Now that you have the helmet, let’s move down to the arms. There is one that we like and want to share it with you. It replicates the Iron Man Mk42 arm very close to the one in the one seen in the movie. The arm is broken down into 21 parts for movability. The maker behind this project also has sewn a glove that goes under the armour.

The maker created the repulsor by cutting it from acrylic sheet and lighting with small white LED’s power by batteries that go under the wrist.

3D Printed Iron Man Arc Reactor

Iron Man Arc Reactor is the core of the suit, the device the puts the Iron Man suit in motion. It is sort of a mechanical heart.

The are many attempts at 3D printing the Arc Reactor but we believe the one that we will tell you more about is the best so far. The reactor was recreated by a Dutch student and believe it or not, it was his first 3D printing project.

Maluche was inspired by the scene in which Pepper Potts gives Tony Stark the Arc Reactor. As a huge Iron Man fan, Timo Maluche saw the scene as an opportunity of making himself way in the 3D printing DIY world and took it. Now, his Arc Reactor is not just a simple piece of plastic. It has slots for mini LEDs, 30 to be precise, and for a 9-volt battery block. Also, just to allow the core to light during night time without using the LEDs, he 3D printed the white parts of the Arc Reactor with glow-in-the-dark filament.

Pretty awesome!

3D Printed Iron Man Boots

Now, moving down to the lower limbs of the suit and getting your feet into some nice Iron Man-ish boots. Fancy walking your neighbourhood in superhero boots? It will literally mean to step into the super hero’s shoes. How cool is that?!

Of course, a simple Iron Man 3D printed boot would not impress anybody. But what would you say about a 3D printed boot with incorporated electronics and joints for extra effects? This is what artist James Christianson has been working on. He is already at his 3rd attempt at recreating the Iron Man boot, but the latest one is more sophisticated than you can imagine. It is supposed to incorporate more expensive electronics, servos, joints and additional materials. Also, the 3rd version will no longer feature the iron Man boot armour we are used to. Instead, it will be more of a skeletal frame.

3D Printing Iron Man Suit

Getting closer to put together all the pieces of this puzzle and moving to the Iron Man suit. You can use the aforementioned parts of the suit to customize your Iron Man cosplay suit, or you can simply go the easier way and use the files of a 3D printing Iron Man suit.

The one we showcase in this post is the replica of Iron Man Mk45 seen in Avengers: Age of Ultron and is split into separate body parts, such as helmet, neck, chest, back, shoulders, bicep, forearm, hand, fingers, abdominal, thighs, shins and boots.
But be aware that depending on your height, you might want to scale the model up or down to fit your stature.

The 3D printed Iron Man suit is perfect for Cosplay shows and events or for Halloween Parties. Needless to say, that it will serve you for many years to come, with additional upgrades, of course.

3D Printing Iron Man Figurines

Iron Man Hulkbuster

You’ve seen Hulkbuster making his appearance in Avengers: Age of Ultron. The bulky version of the Iron Man is impressive both by design and size. Plus, you can use it both as a piece for tabletop games or as a collectable.

When 3D printed, the Iron Man Hulkbuster action figure will stand 23cm high by 18cm wide.

Those who want to 3D print the figurine can download the files here.

Iron Man Armory 3D Printing Miniature

Another version of Iron Man 3D Printing miniature that will stand only 15 cm tall. 3D print the toy in a single item and paint it using the trademark Iron Man colours – gold and crimson for a more realistic look. The figurine doesn’t need support for 3D printing but it is required to set the infill at 12%. The artist behind this magnificent Iron Man figurine says it will take you up to 3 hours to print.

So, what are you waiting for? Get the files here and start printing.

Iron Man Mark 46 Statue

We kept this one for dessert because it’s the miniature we’re most proud of to show off. The legendary Tony Stark turned Iron Man wearing his self-designed armour enhanced with nanotechnology and infrared scanners. Wearing one of this will ensure your safety in some of the most dangerous situations. It withstands blasts and and powerful strikes. Needless to say that this armor suit is bulletproof. Of course, Tony didn’t rely only on its bulletproof capability. For extra security, he enhanced the armor with upgraded repulsors and lasers, sonic pulses and light flashes.

Of course, the Iron Man Mark 46 miniature will not feature all this weaponry, but rest assured that you have one of the best saviours that has ever existed.

Also, the miniature is captured in levitating mode. Use a different material for the fire blast that the feet repulsors create.

The STL files are already available at Gambody 3D Printing Premium Marketplace for purchase.

CONCLUSION

Whether you decide to give it a shot to an Iron Man 3D printing figurine or to an entire Iron Man 3D printed suit, you will make the best decision either way.

(Visited 6,992 times, 1 visits today)

Author

A 3D printing website where users can buy and sell 3D printer files.

OBJ file Arc Reactor mk1 Iron Man・3D printing template to download・Cults

Bat-Cat

4 €

Daredevil Mask

10 € -40% 6 €

Sandman head

2 €

Turret 1

1 €

Chapter/Chapter "Gurren Lagann"

€12. 50 -twenty% 10 €

Laser Saber OBI WAN Kenobi

1 €

Edward Newgate - White beard/ Barba Blanca One piece

12 € -thirty% 8.40€

Hellboy, evil

4 €

Best 3D Printer Files in the Miscellaneous Category

Kobuki Robot

Free

NAUGHTY DİNOSAUR

Free

matt stitch

Free

Thwomp

Free

T 815 AV 15

35 €

Designing a Parametric "Print in Place" Hinged Container Using Autodesk Fusion 360

Free

RC model of BTR 82 in 1/16 scale.

35 €

1:10 Scale off road camper

30.70 €

Bestsellers in Miscellaneous category

Halloween Haunted House Lamp with 3d Moon - NO PREPARATION AND PAINTING NEEDED

€4.58

Articulated Raykuaza Flexible Dragon Pokémon

1 €

Ghost Punch x10

€1.99 -ten% 1.79 €

RS-X-Bow "Government - 1911" style

5,75 €

Wolf - Flexi Articulated Animal (printed in place, no supports)

2 €

Black Phone Movie Invader 2 Piece Mask 3 Style Frowning Smile Without Mouth STL

10.23€

Articulated axolotl

3.50 €

Lord of Chaos

5. 50 €

MiniAdder v2

12.50 €

Articulated Gyarados

1.99 €

Articulated cute spider

2.49 €

Gengar - pokemon with flexible articulation (seal in place, without supports)

2 €

Adderini - 3D Printed Repeating Slingbow / Crossbow Pistol

6.25 €

T-800 Terminator Moving Skull

15 € -25% 11.25 €

Giarados - articulated sea serpent

1,50 €

flexible volute

2 €

Do you want to support Cults?

Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so it is very easy to support us in maintaining activities and creating future developments of . Here are 4 solutions available to everyone:

  • AD: Disable the AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Shop online with our affiliate links here Amazon.

  • DONATIONS: If you want, you can donate via PayPal here.

  • * INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!

Arc reactor. Iron Man Arc Reactor

Friends, I am glad to present you my kit assemble yourself. Want to buy a ready-made iron man chest reactor or order parts to make DIY ?

*Offer valid!

Time of continuous operation from one battery "crown" more than 18 hours.

Surprise your friends and passers-by, people in metro chest hole effect and use it as a flashlight at night.

Wear with any outfit and go have some fun!


!!! NEW MODELS MAY BE A LITTLE DIFFERENT!!!

110% money back guarantee,

if you don't like my DIY!

Buy homemade Iron Man Reactor is available by filling out the form and contacting

DIY


Buy ready


Free shipping!

Easy-to-replace battery included !
Attention! The chest reactor has a convenient mount on neodymium magnets and easily put on clothes without damaging it!
Me with reactors ZhCh already shown on TV a couple of times : ( and )

In Russia, I gave more than 60 master classes - how to assemble a reactor with your own hands and visited FREE with homemade ARC reactors, many exhibitions (like ComicCon).

Features:

Number of LEDs: 12

Dimensions: diameter 89, height 14 mm
Engraving: Triangle + Proof that Tony Stark has a heart

Colour: blue
Weight: 95 g

DIY kit

After assembly:

— What do you need to order?
From you an advance payment for the reactor, a completed form, contact me.

— What are the guarantees?
1. Reviews of buyers and people who have passed my master classes can be read

We have already seen how artists and designers use 3D printing technology to make costumes and props. She doesn't care about anything, whether it's a Halloween costume or cosplay. What about Iron Man's arc reactor? It was this idea that dawned on the Dutch student Timo Maluche one evening.

“After I printed a whole bunch of patterns and knick-knacks, I thought it was time for a real project,” says Maluche. - Just that evening, Iron Man 2 was shown on TV. I love Iron Man and just couldn't miss this movie. The moment I saw the gift that Pepper Potts made for Tony Stark (“This proves that Tony Stark has a heart”), I knew what exactly would be my first project.”

In general, Maluche decided to print an arc reactor. To prepare, he bought an Iron Man 2 DVD and studied the aforementioned scene thoroughly. He even looked through it frame by frame so as not to miss anything. At the same time, he tried to compare the size of the reactor with the hands of Pepper Potts, so as not to miss the scale.
Maluche designed all the parts in Autodesk Inventor 2014 and then printed them on a CartesioM 3D printer. However, this was not enough for him. He wanted to achieve maximum realism, which meant that the reactor had to glow.

“At first, the reactor was conceived without LEDs, but then I thought how great it would be if it actually glowed, so I added slots for 30 LEDs and a 9V battery,” explains Maluche. - For assembly, the simplest electronics were used. I inserted the LEDs into the prepared slots, connected a resistor to each of them and connected in parallel.
For the white sectors, Maluche used a fiber that glows in the dark. It took a week to design, print, connect and assemble. Not bad for a beginner who just bought his first 3D printer. Now Maluche is a third-year student at the Faculty of Precision Engineering. He first encountered 3D printing technology during an internship at

17.02.2011, 17:20
Source: 3dnews.ru (Artem Terekhov), http://ubergizmo.com

Quite recently Iron Man Tony Stark has visited the wide screen for the second time. Give modding lovers just a reason - and they will build anything, on any topic. So, on the site instructables.com, instructions for creating an individual reactor "a la Tony Stark" appeared.

Starting with a blueprint. We draw approximately how the reactor will look like

Now we solder the ring


from the trash (handy failed power supplies) This is what should happen:


Next, close it with a plastic ring. I don’t know what it can be made of, maybe from some cans of herring (herring is sold in plastic containers of a similar shape. Only the core needs to be cut out there)

The design is quite simple in execution and within the power of anyone who likes to delve into electronics. An interesting touch - the central LED, covered with a lens and emitting diffused blue light, pulsates to the beat of the wearer's heartbeat. This is done by connecting an old heart rate monitor purchased on eBay to the system. The creators claim that the device, including a set of 3 V batteries, is light enough and can be worn freely for several hours. Detailed instructions can be found on

Iron Man by Robert Downey Jr. became a key figure in the world of superheroes, which the American people love so much. The love for the brilliant scientist with a specific sense of humor has been passed on to the whole world, and now his popularity has eclipsed even Captain America. A very curious element is the Iron Man reactor, which he implanted into the body. Consider what kind of invention it is and how it is modified in each film.

What the Iron Man 9 reactor is made of0043

It is a power core made of palladium. It was the main source of power for the first Iron Man suits, and was then modified to an advanced level by Tony to power the already upgraded suits. The second reactor consists of an element that Tony Stark created in the second Iron Man movie.

Stark Industries once operated a similar reactor, but it was destroyed when Pepper overloaded it. It is not known what happened to the reactor after this event. A similar device also powers Stark Tower, and a smaller version of it was created to power Iron Man's suit.

  1. The described invention is based on the reactor of the same name in the comics, both have almost the same appearance and functionality.
  2. In the plot of the film, the element created for Iron Man's new arc reactor is called vibranium. However, it is mentioned later in the movie that vibranium is a metal compound from the Wakanda region that was used to create Captain America's shield. That is, it was not an element created by Howard Stark and used in an arc reactor. Thus, the element in the new reactor has not yet been named.
  3. The physical reaction Tony experiences when he inserts a nuclear reactor instead of a heart does not match how heavy metal poisoning usually works. Although his health would have stabilized after the removal of the palladium reactor, the removal of the metal already in his body would have required many months of treatment.

Reactor types

Consider the reactors involved in the film: