Home » Misc » Ft5 3d printer

Ft5 3d printer


Folger Tech FT-5 Review 2022

4

See Price

Here’s a dilemma: what if you want a 3D printer that allows you to build huge models, but also one that won’t leave a huge hole in your bank account? Tough luck, right? Wrong! We’ve actually found a printer that meets both of these criteria.

Today we’ll be taking a look at the Folger FT-5, specifically the R2 model. We’ll be examining this printer’s strengths and weaknesses equally, and trying to help you decide if it’s the right product for you. Alright, with that out of the way, let’s jump right in.

Filament Diameter1.75mm
Extruders1
Supported MaterialsPLA, ABS
ConnectivityUSB, SD card
Printing Speed180mm/s
Build Volume12 x 12 x 15.75”

Table of ContentsShow

    Design

    Unlike the R1, the R2 is made entirely from an aluminum composite. This helps keep the overall weight down, but also lends this printer a vaguely futuristic appearance. Overall, the structure is quite simple and shouldn’t take too long to assemble; even connected the heated bed and extruder can be done in a couple of seconds.

    Understandably, given this model’s huge build area, it uses an open design. This is kind of a trade-off, though, since this makes it slightly more difficult to maintain a specific temperature. Further, given the size of this printer, creating your own enclosure is a little more involved.

    Given the price of this product, you might expect the manufacturer to cut a corner here and there. Despite this, if they have, it’s not obvious where. The FT-5 R2 has everything from an easily removable spool to a small LCD screen for easier control.

    Printing

    We were actually surprised by how high-quality the FT-5’s prints are. There’s a good level of definition even at the fastest speed, and if you’re willing to slow things down a little, you can even print highly complex structures. Better still, there’s very little post-processing required.

    Now, there is one slight issue: the FT-5 R2 can only print with PLA and ABS. This is to be expected of a low-budget 3D printer, but you’d expect a little more versatility from a mid-range model. That said, given the print quality, build size, and aforementioned temperature control problems, this is an easily-forgiven complaint.

    Let’s temper our expectations, though. The FT-5 sits in the middle ground between hobbyist and professional-quality. It probably won’t be good enough for commercial purposes, but for small-scale production or occasional use, it’ll work just fine.

    Features

    There’s a lot to like about the Folger FT-5, but not many of its best features are noticeable at first glance. Take the frame, for instance: it’s highly resistant to vibrations, meaning your prints should fail less often. There’s also the ability to use it with either a 110 or 220V input, which is fantastic for overseas users.

    There’s no WiFi functionality, but there rarely is in this price range. Instead, you can move model files directly from your PC, on a USB thumb drive, or an SD card. You’ll also have to find your own modelling software, since there isn’t any included. However, with free options like Cura available, this isn’t much of a problem.

    Finally, there’s the heated bed. This allows you to print without the need for adhesive tape, and actually helps prevent your models from warping during the print. See? There’s quite a bit of functionality built-in that isn’t instantly obvious.

    Cost

    At around $500, the Folger FT-5 R2 isn’t the cheapest 3D printer around. That said, it’s also far from the most expensive. Since it can be fully assembled in under an hour and doesn’t require any additional extruder heads, expensive filaments, or add-ons, there’s actually a fairly low initial time and financial cost involved.

    PLA and ABS are two of the least expensive 3D printing materials around, so this model even has lower running costs than similarly-priced products. There’s no DRM, scanners, or proprietary mechanisms in place to drive the price up, either, which is fantastic.

    Folger even offers a slight discount if you buy several of these printers. Would we recommend filling a warehouse with them printers and starting a company? Probably not, if only because there are higher-quality industrial printers available. However, for home use, the FT-5 is near perfect.

    Support

    You hate to see it: a company with exceptional, reasonably-priced products and a poor support section. It offers a few frequently asked questions for some of its more recent printers, and guides with some troubleshooting tips, but if you have a more specific problem, you’ll have to contact the company by email. They do claim to reply within 48 hours, at least.

    Strangely, much of this information is hosted on Google Drive instead of the company website. It’s unlikely that Folger had so much traffic that they incurred charges from their host, but either way, a Google Drive link gives the site a profoundly unprofessional look. Come on guys, really?

    It’s not all bad, though: Folger offers a 14-day guarantee on each of its printers, ensuring a full refund if it’s dead on arrival. You can also return your product for any reason within two weeks, although you may be liable for postage costs.

    Folger Tech FT-5 | Large-Scale 3D Printer Kit

    Folger Tech FT-5 Large Scale 3D Printer Kit

    Folger Tech

    • $52800
    • Save $71
    Default Title - Sold Out Quantity
    • Info
    • Why buy from us?
    • Shipping
    • Price Guarantee

    Lead Time: 4-10 Business Days

    FOLGER TECH-FT-5 SPECS:

    • Print Area: 300x300x~400mm (12x12x15.
      75") Build area
    • Printer Size: 740mmx500mmx540mm
    • Power: 360w 12V system CE rated Power Supply, can use 110v or 220v
    • Max Extruder Temp: 245C (can reach higher but will shorten the longevity of the extruder)
    • Max Bed Temp: 100C
    • X/Y Linear Rail System
    • Z T8 4 Start  Lead screws
    • Controller: MKS Gen 1.4
    • Resolution: 0.05mm (50 Microns)
    • Max Stable Speed: TBA
    • 12V Heated Bed
    • SHIPPING WEIGHT 45lbs! (21kg)

    ** As we receive customer feedback we do make small alterations to the kit if we feel they improve the kits performance and stability, the kit you receive might reflect some of these slight changes and improvements.

    The Folger Technologies FT-5 is a great kit combining the simplicity of an erector set with the power of a much more expensive desktop printer. The kit comes with everything you need to assemble the machine with the use of a few simple tools and a little bit of time you too can get started 3D printing the world's next big idea. 

    The highlights of this kits are the massive 300x300x400mm (12x12c15.75") build area, Linear rails on the X and Y movements. Dual Y and Z motors for added speed and power. This large-scale 3D printer kit also includes an aluminum build surface/headed bed capable of printing many materials including PLA and ABS.

    This kit includes the following:

    • 2004 LCD with SD card Reader

    • x4 KP08 bearings

    • x3 Idler Pulley

    • 4x 8mm Chromed Linear Rod for  Z (Pre-Cut)

    • 2x T8 4 Start Lead Screw 8mm pitch 

    • x1 300mmx300mm Heated Bed

    • x1 Direct Drive Extruder w/ Injection Molded Parts for 1.75mm ABS/PLA/Wood/HIPS/PETG 

    • 360W 12v 30A Power Supply

    • x6 NEMA 17 5. 0kg/cm Stepper Motors

    • 3x 400mm 12mm Linear Rails

    • x7 20 Tooth Pulleys

    • x1 MKS Gen 1.4 Controller

    • x5 A4988 Stepper Drivers 

    • x1 Roll of 8mm Kapton Tape

    • x3 Electronic End Stop Circuits w/ LED

    • x3 Belt Tensioners

    • x8 Threaded Bed Adjustment Knobs

    • x8 Bed Springs

    • All Required Nuts/Bolts for Assembly

    • Power Cable

    Features:

    • Impressive 300mmx300mmx~400mm Build Area

    • Able to print ABS & PLA Plastic (1.75mm)

    • Can run 110V or 220V (Only Comes With US Cord)

    Items you will need:

    • Tools

    • Filament

    • Time

    Build Guide and Firmware/Software:

    ** Please note the items included inside the below link are often updated to include new and updated information so please bookmark it for your records.

    • Google Drive Link: (Build Guide and Firmware)
    • https://drive.google.com/open?id=0B9b1NbuMK524aGhPQXRLTW9mams
      Disclaimer:
       
      This is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures.

      Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Tech 3D Printer Kit in a safe manner.

      However ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read all of the manual to enable you to make an informed decision.

      Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly.

      High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.

      We wouldn't recommend leaving your printer running unattended.We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.

      Price match guarantee:

      We work very hard to ensure that we offer the absolute best prices online for all of our printers including Tevo 3D printer kits. If you find another online store that offers a lower price than us on Tevo 3D printers for sale, please let us know and we will refund your original payment for the difference. Read More

      30 day price assurance guarantee:

      We want you to feel confident that you are getting the absolute best price for the product. If you find that our own website has a lower price for the same item you have ordered within 30 days of your purchase date, we will refund the difference! Read More

      Full manufacturer direct warranty:

      We are an authorized dealer for all our products and comes with the full manufacturer warranty.

      Tax free (except California and Nevada):

      The price you see is the price you pay but because we operate in California and Nevada we must charge tax in California and Nevada.

      Safe & secure online ordering:

      We are certified Level 1 PCI DSS compliant. What this means is that we meet all the requirements defined by the Payment Card Industry Security Standards Council. For additional information on PCI Compliance, visit the PCI Compliance Guide website. We also accept payment via Pay Pal, a leader in secure online payment processing.

      Best customer service:

      We strive to offer the best customer service we can. If you have any questions please let us know by phone or email.

      Exclusive deals:

      We appreciate each and every customer that comes to our store. We know you have a lot of choices when it comes to your 3D printing purchase. That's why we'd like to show our appreciation by periodically sending out exclusive coupons and deals to our past customers!

      Order Confirmation:

      As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorized your credit card for the purchase.  As soon as we receive your order we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment.  If your item is on backorder or unavailable we will void the pre-authorization and reach out to you via e-mail.  If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and submit the order for shipment.

      Order Shipment:

      If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order.  We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provide when checking out.  If you do not receive tracking information from us within six business days of your order feel free to follow up with us at [email protected]

      Domestic Shipping:

      We do not ship to P.O. Box.

      International Shipping:

      Please contact us for international shipping rates

       

      We work very hard to ensure that we offer the absolute best prices online for all of our printers including Tevo 3D printer kits. If you find another online store that offers a lower price than us on Tevo 3D printers for sale, please let us know. We want you to feel confident when you buy a Tevo 3D printer or any of our other printers that you are getting the absolute best price for the product.

      To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors’ website and we will process the credit accordingly.

      Our 100% Price Guarantee has some limitations:

      • You must purchase the item from our website before requesting your Price Match Guarantee
      • Promotions such as rebates and buy one, get one free offers are not eligible
      • The item must be in stock on the competitors website
      • The competitor must be an online store, they may not have a retail location
      • The item must ship from the same country.
      • The website cannot be a discounter or auction website (ie; eBay, overstock, etc..)
      • The competitor must be an Authorized Retailer for the product in question
      • The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax or any customs and duties

      Info▼

      Lead Time: 4-10 Business Days

      FOLGER TECH-FT-5 SPECS:

      • Print Area: 300x300x~400mm (12x12x15.
        75") Build area
      • Printer Size: 740mmx500mmx540mm
      • Power: 360w 12V system CE rated Power Supply, can use 110v or 220v
      • Max Extruder Temp: 245C (can reach higher but will shorten the longevity of the extruder)
      • Max Bed Temp: 100C
      • X/Y Linear Rail System
      • Z T8 4 Start  Lead screws
      • Controller: MKS Gen 1.4
      • Resolution: 0.05mm (50 Microns)
      • Max Stable Speed: TBA
      • 12V Heated Bed
      • SHIPPING WEIGHT 45lbs! (21kg)

      ** As we receive customer feedback we do make small alterations to the kit if we feel they improve the kits performance and stability, the kit you receive might reflect some of these slight changes and improvements.

      The Folger Technologies FT-5 is a great kit combining the simplicity of an erector set with the power of a much more expensive desktop printer. The kit comes with everything you need to assemble the machine with the use of a few simple tools and a little bit of time you too can get started 3D printing the world's next big idea. 

      The highlights of this kits are the massive 300x300x400mm (12x12c15.75") build area, Linear rails on the X and Y movements. Dual Y and Z motors for added speed and power. This large-scale 3D printer kit also includes an aluminum build surface/headed bed capable of printing many materials including PLA and ABS.

      This kit includes the following:

      • 2004 LCD with SD card Reader

      • x4 KP08 bearings

      • x3 Idler Pulley

      • 4x 8mm Chromed Linear Rod for  Z (Pre-Cut)

      • 2x T8 4 Start Lead Screw 8mm pitch 

      • x1 300mmx300mm Heated Bed

      • x1 Direct Drive Extruder w/ Injection Molded Parts for 1.75mm ABS/PLA/Wood/HIPS/PETG 

      • 360W 12v 30A Power Supply

      • x6 NEMA 17 5. 0kg/cm Stepper Motors

      • 3x 400mm 12mm Linear Rails

      • x7 20 Tooth Pulleys

      • x1 MKS Gen 1.4 Controller

      • x5 A4988 Stepper Drivers 

      • x1 Roll of 8mm Kapton Tape

      • x3 Electronic End Stop Circuits w/ LED

      • x3 Belt Tensioners

      • x8 Threaded Bed Adjustment Knobs

      • x8 Bed Springs

      • All Required Nuts/Bolts for Assembly

      • Power Cable

      Features:

      • Impressive 300mmx300mmx~400mm Build Area

      • Able to print ABS & PLA Plastic (1.75mm)

      • Can run 110V or 220V (Only Comes With US Cord)

      Items you will need:

      • Tools

      • Filament

      • Time

      Build Guide and Firmware/Software:

      ** Please note the items included inside the below link are often updated to include new and updated information so please bookmark it for your records.

      • Google Drive Link: (Build Guide and Firmware)
      • https://drive.google.com/open?id=0B9b1NbuMK524aGhPQXRLTW9mams
        Disclaimer:
         
        This is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures.

        Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Tech 3D Printer Kit in a safe manner.

        However ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read all of the manual to enable you to make an informed decision.

        Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly.

        High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.

        We wouldn't recommend leaving your printer running unattended.We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.

        Why buy from us?▼

        Price match guarantee:

        We work very hard to ensure that we offer the absolute best prices online for all of our printers including Tevo 3D printer kits. If you find another online store that offers a lower price than us on Tevo 3D printers for sale, please let us know and we will refund your original payment for the difference. Read More

        30 day price assurance guarantee:

        We want you to feel confident that you are getting the absolute best price for the product. If you find that our own website has a lower price for the same item you have ordered within 30 days of your purchase date, we will refund the difference! Read More

        Full manufacturer direct warranty:

        We are an authorized dealer for all our products and comes with the full manufacturer warranty.

        Tax free (except California and Nevada):

        The price you see is the price you pay but because we operate in California and Nevada we must charge tax in California and Nevada.

        Safe & secure online ordering:

        We are certified Level 1 PCI DSS compliant. What this means is that we meet all the requirements defined by the Payment Card Industry Security Standards Council. For additional information on PCI Compliance, visit the PCI Compliance Guide website. We also accept payment via Pay Pal, a leader in secure online payment processing.

        Best customer service:

        We strive to offer the best customer service we can. If you have any questions please let us know by phone or email.

        Exclusive deals:

        We appreciate each and every customer that comes to our store. We know you have a lot of choices when it comes to your 3D printing purchase. That's why we'd like to show our appreciation by periodically sending out exclusive coupons and deals to our past customers!

        Shipping▼

        Order Confirmation:

        As soon as you place your order you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorized your credit card for the purchase.  As soon as we receive your order we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment.  If your item is on backorder or unavailable we will void the pre-authorization and reach out to you via e-mail.  If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and submit the order for shipment.

        Order Shipment:

        If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order.  We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provide when checking out.  If you do not receive tracking information from us within six business days of your order feel free to follow up with us at [email protected]

        Domestic Shipping:

        We do not ship to P.O. Box.

        International Shipping:

        Please contact us for international shipping rates

         

        Price Guarantee▼

        We work very hard to ensure that we offer the absolute best prices online for all of our printers including Tevo 3D printer kits. If you find another online store that offers a lower price than us on Tevo 3D printers for sale, please let us know. We want you to feel confident when you buy a Tevo 3D printer or any of our other printers that you are getting the absolute best price for the product.

        To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors’ website and we will process the credit accordingly.

        Our 100% Price Guarantee has some limitations:

        • You must purchase the item from our website before requesting your Price Match Guarantee
        • Promotions such as rebates and buy one, get one free offers are not eligible
        • The item must be in stock on the competitors website
        • The competitor must be an online store, they may not have a retail location
        • The item must ship from the same country.
        • The website cannot be a discounter or auction website (ie; eBay, overstock, etc..)
        • The competitor must be an Authorized Retailer for the product in question
        • The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax or any customs and duties

        Conveyor cover ceiling vw transorter T5 | Festima.

        Ru

        Ceiling cover conveyor T5 2003-2015 Original, used, no defects We send to the regions

        We found this ad 3 years ago
        Click Follow and the system will automatically notify you of new offers from all bulletin boards

        Go to announcement

        Complaint type OtherCopyright infringementProhibited informationAd out of datePornographySpam

        Comment

        Show original

        Address (Click on the address to view the map)

        Moscow, Kaluzhsko-Rizhskaya line, Sviblovo metro station
        More announcements

        Item number 29048 Interior ceiling lamp Volkswagen Passat B5+ 2.8 2003 (used) Brand: Volkswagen Model: Passat B5+ Year: 2003 Engine: 2.8 Number and manufacturer: 3B0947113 VAG Interior lamp fits: Seat Altea 1st generation 2004 - 2015 (5P1, 5P5, 5P8) Seat Leon 2nd generation 2005 - 2012 (1P) Skoda Superb 1st generation 2002 - 2008 B5 (3U4) Volkswagen Beetle 1st generation 1997 - 2010 A4 (1C1, 1Y7, 9C1) Volkswagen Bora 1st generation 1998 - 2005 A4 (1J2, 1J6) Volkswagen Golf 4th generation 1997 - 2006 Mk4 (1E7, 1J1, 1J5) Volkswagen Jetta 4th generation 1998 - 2005 (1J6, 9M2 ) Volkswagen Jetta 5th generation 2005 - 2010 (1K2, 1K5) Volkswagen Passat 5th generation 1996 - 2005 B5, B5. 5 (3B2, 3B3, 3B5, 3B6) Volkswagen Polo 4th generation 2001 - 2009 Mk4 (9N1, 9N2, 9N3) Volkswagen Polo 5 generation 2009 - 2020 Mk5 (602, 604, 612, 614, 6C1, 6R1) Volkswagen Sharan 1 generation 1995 - 2010 7M (7M6, 7M8, 7M9) Volkswagen Touran 1st generation 2003 - 2015 1T (1T1, 1T2, 1T3) Volkswagen Transporter 4th generation 1990 - 2003 T4 (Z1H, Z1X, Z2H, ZMH, ZNH, ZPH, ZRH, ZSH, ZVH, ZWH, ZXH, ZXX, ZYH ) Seat, Siat, Siat Altea, Leon; Skoda Superb; Volkswagen, VW Beetle, Bora, Golf, Jetta, Passat, Polo, Sharan, Turan, Touran, Transporter; You can find other spare parts by going to our store by clicking "VAGHOUSE" Call, write to Viber or WhasApp (contact information in our store) Our advantages • We give a guarantee for the entire range • We will quickly and efficiently send the spare part you need to your region • We check the goods immediately before shipment • Discount system for regular customers • We will refund the money in case of non-working of the goods We work with transport companies: 1. Business lines 2. Deck 3. Pack 4. Dpd 5. Energy Work schedule: Monday - Saturday 09N1, 9N2, 9N3) Volkswagen Polo 5th generation 2009 - 2020 Mk5 (602, 604, 612, 614, 6C1, 6R1) Volkswagen Transporter 5th generation 2003 - 2015 T5 (7EA, 7EN, 7FE, 7FD, 7FE 7НF, 7НН, 7НМ, 7JD, 7JЕ, 7JL, 7JZ) Volkswagen, VW Golf, Jetta, Polo, Transporter; You can find other spare parts by going to our store by clicking "VAGNOUSE" Call, write to Viber or WhasApp (contact information in our store) Our advantages • We give a guarantee for the entire range • We will quickly and efficiently send the spare part you need to your region • We check the goods immediately before shipment • Discount system for regular customers • We will refund the money in case of non-working of the goods We work with transport companies: 1. Business lines 2. Sdek 3. Pack 4. Drd 5. Energy Work schedule: Monday - Saturday 09:00-19:00 Sunday: Day off Buying a car in any condition

        Auto parts

        a year ago Source

        Reinforced cross, made on a 3D printer, on the last photo on the drawing number 18. Production of plastic products: ABS, PLA, SBS, PETG according to your drawings, 3d models or according to your description. On the printer, you can make auto parts, decor elements, building models, reduced copies of cars (models), gears (for food processors, blenders, power windows, mirror drives, etc.) figurines, busts, electronic device cases, various props for cafes and shops (branded plafonds, napkin holders, pepper shakers) and much more. Designing individual models for printing, as well as printing your finished models, repairing plastic products. Both piece production and small-scale production are possible. There are also plastics with a diameter of 1.75mm, suitable for most home 3d printers and 3d pens, heaters, thermistors, belts, nozzles, pulleys, teflon tube, voltage converters, protection and charge control boards, radio components, arduino, modules and much more , you can find out more in the announcements of the profile. The cost is calculated from the number of grams of plastic, printing time (depends on the diameter of the nozzle (affects the accuracy of the model, tolerances of 0. 1-0.5 mm)), the material used and the need for post-processing of the model (chemical and physical processing, painting the part). The average cost is 15 rubles per gram of the finished product, depending on the parameters it can vary up or down. It is possible to send avito by delivery, Russian post, SDEK or boxberry. Payment of your choice cash on delivery or prepayment. If the total amount of the order is less than 1 tr. transport costs for delivery to the point of departure will be added to the cost, depending on the selected transport company (100-300r). Communication by phone, WhatsApp. Instagram: 3dtechnologies tags: Volkswagen transporter t3, cardan, backstage, cardan.

        Auto Parts

        a year ago Source

        Plafond in the ceiling VW T5 Transporter Price for 1 piece Spare parts from Europe, not used in Russia Delivery to the regions. Business lines, PEK, Energy, KIT We have a huge selection of used spare parts for this model in stock and on order, call ask or write messages

        Auto parts

        a year ago Source

        Interior lamp shade 3B0947105C for Volkswagen transporter T5 multiwan caravelle T5 3B0919383 Stove control unit for VW Transporter T4 Article: 774 o \ n 0K9A051310 Interior ceiling lamp (central) Article: 775 o \ n 951903C000 Sensor Article: 776 o \ n K55234892 Subframe silent block (lower) Article: 777 o \ n 0K30A66780A Sound signal Article :778 o\n K55251841 Front left mudguard Article:779 o\n 0K53V64610ME Ashtray of the center console of the salon threshold (internal) front right Article: 1034 o \ n 0K53E66380A Pad right Article: 1263 o \ n 0K53A68722 Pad right in the door Article: 1264 o \ n 0K53A68712 Pad left in the door Article: 1265 o \ n 281924X130 Decorative engine cover Article: 1318 o \ n OK53A64330 Glove compartment Article: 1532 o \ n 0K53Z52420 Hood hinge right left Article: 1762 o \ n 0K53A51270 Trunk lining with devekt Article: 1763 o \ n 9305117b Sensor, 2 fuel temperature20 n E1346R015006 Rear-view mirror (in the cabin) Article: 2323 o \ n 0K53V60210A Pad under the steering wheel Article: 2596 o / n: 0K53Z63620A Left trunk lid damper Article: 1151 o\n 0K53Z62620A Trunk lid shock absorber Right Article: 1152 (glove compartment) Article: 5247 o \ n OK53A6812X Trim (body inside) righto \ n OK52Y6815X Rear left pillar pad (body inside) Article: 5250 o \ n OK53C68170 Pad (body inside) Article: 5251 o \ n OK53V68140 Center pillar pad, right (body inside) Article: 5252 O \ N 1K54A69320ASY Sun visor right ARTICLE: 192 o \ n 0K53A64150CCY Trim (body inside) Article: 1262 o \ n OK53A64250 Pad under the steering wheel Article: 1558 o \ n OK53A68753 rear left glove compartment Article: 1562 o \ n 30422747 Rear brake light pad (salon) Article: 1560 for Kia Carnival 19432, 37. 998413

        Auto parts

        2 years ago Source

        Attention! Festima.Ru is a search engine for ads from popular sites. We do not sell goods, we do not store images and personal data. All images belong to their respective authors Denial of responsibility

        For sale dome interior lighting front Volkswagen T5 Transporter 2003-2015. There are many other spare parts for Volkswagen T5 from 2003-2015 onwards. I send spare parts to the regions by transport companies. Call.

        Auto Parts

        2 years ago Source

        VW Volkswagen (Volkswagen) Transporter T4 1991 1992 1993 1994 1995 1996 (transporter) Interior front light (under the sunroof). There are many other spare parts for this and other cars in stock.

        Auto parts

        8 months ago Source

        I sell ceiling lamps for Volkswagen Transporter T5 2003-2015. part number 7H0947105A. price for one.

        Auto parts

        a year ago Source

        Interior light T-4

        Auto parts

        11 months ago Source

        Sale trim with ceiling accessories Volkswagen Transporter, Multivan t5 VW T5. Complete set: ceiling, handles, ceiling There are many other spare parts for T5. Call.

        Auto parts

        2 years ago Source

        Available from AUTOSOT Spare Parts. 7H5947105B Y20 Interior lamps without block Volkswagen Transporter T5 7H5947105B Y20 Interior lamps Volkswagen Transporter T5 Condition: used, working tested. Spare part contract, without run across the Russian Federation. Delivery in Moscow and the Regions There are many other spare parts for your car in stock. Original. The documents. Guarantee.

        Auto parts

        Moscow, Eastern administrative district, Ivanovskoye district

        2 years ago Source

        Available from AUTOSOT parts store. 7H5947105B Y20 Interior ceiling lamps without block Volkswagen Transporter T5 7000 p. 7H5947105B Y20 Interior ceiling lamps Volkswagen Transporter T5 7500 r. Condition: bu, working tested. The spare part is contract, without a run in the Russian Federation. Delivery in Moscow and Regions There are many other spare parts for your car. Original. The documents. Guarantee.

        Auto parts

        Moscow, Eastern administrative district, Ivanovskoye district

        2 years ago Source

        Available from AUTOSOT Spare Parts. 7H5947105B Y20 Interior lamps without block Volkswagen Transporter T5 7H5947105B Y20 Interior lamps Volkswagen Transporter T5 Condition: used, working tested. Spare part contract, without run across the Russian Federation. Delivery in Moscow and the Regions There are many other spare parts for your car in stock. Original. The documents. Guarantee.

        Auto parts

        Moscow, Eastern administrative district, Ivanovskoye district

        2 years ago Source

        For sale ceiling light 7H0947105A Volkswagen T5 VW T5 Transporter 2003-2015, VW Caddy, Skoda Roomster There are many other spare parts for Volkswagen T5 from 2003-2015 onwards. I send spare parts to the regions by transport companies. Call.

        Auto Parts

        a year ago Source

        For sale ceiling light 7H0947105A Volkswagen T5 VW T5 Transporter 2003-2015, VW Caddy, Skoda Roomster There are many other spare parts for Volkswagen T5 from 2003-2015 onwards. I send spare parts to the regions by transport companies. Call.

        Auto parts

        Moscow, Mikhailovsky proezd, 5

        2 years ago Source

        Interior ceiling lamp VW Transporter Multivan Caravella T5 T6 2010 VolksWagen Transporter caravel multivan car 2010 t5 t6 model range - 2003 2004 2005 2006 2007 2008 20092010 2011 2012 2013 2014 2015 part number - 6q0947105f condition - perfect The car is completely disassembled A lot of things in stock Shipping to the regions

        Auto parts

        Nizhny Novgorod, Kompozitorskaya street

        2 years ago Source

        Interior light Volkswagen T4 Installation . Warranty. We work with regions (sending by transport company)91-2003, Volkswagen T4 Caravella 1991-2003, Volkswagen T4 Multivan 1991-2003 You can install all purchased spare parts at reasonable prices in our car service. Our dismantling is located at the address: Moscow Kashirskoye shosse, possession 9G. Opening hours from 10:00 to 19:00

        Auto parts

        2 years ago Source

        Interior dome light Volkswagen T4 Installation . Warranty. We work with regions (sending by a transport company) In addition to this part, we have a large assortment of spare parts for Volkswagen T4 1991-2003 (Caravelle, Multivan, Transporter) Compatibility applicability details: Volkswagen T4 Transporter 1991-2003, Volkswagen T4 Caravel 1991-2003, Volkswagen T4 Multivan 1991-2003 You can install all purchased spare parts at reasonable prices in our car service. Our dismantling is located at the address: Moscow Kashirskoye shosse, possession 9G. Opening hours from 10:00 to 19:00

        Auto parts

        Moscow, Kashirskoe shosse, vl9g

        2 years ago Source

        Auto Parts

        a year ago Source

        Creality Ender-5 Pro 3D Printer Review

        Welcome to the Color World.

        At the end of the article you can watch the video version of this review

        For the past few years, Creality has been the leader in the production of home budget FDM 3D printers. In particular, their most popular Creality Ender-3 printer.

        At the moment there are already several of its modifications. But in parallel with them there is another line of printers - Ender-5. And today we want to tell you about one of its versions. Creality Ender-5 Pro.

        Unpacking

        Let's not drag out the introduction and move on to unpacking and assembly. The printer comes in a fairly large box in a semi-disassembled state. On top is paper detailed assembly instructions and some more waste paper.

        Shield with fixing.

        Extruder motor with feeder

        Z-axis assembly.

        Gantry with X and Y axes, also fully finished, with hot end and all belts.

        Table with already glued elastic magnetic backing and wire, at the end of which there is an XT60 connector.

        And at the very bottom of the box there are 4 vertical profiles 20x40 cm.

        Lower housing with control box and all wires.

        Also included is a 250g spool of white PLA.

        And box with tools and hardware.

        In addition to the assembly screws, filament spool holder and power cable, the box contains: a bunch of zip ties, a nozzle cleaning needle, a set of hexagons, a wrench, a small screwdriver, the most common side cutters with soft blue handles, a spare nozzle, a fitting for Teflon tubing and a few retainers for fittings. MicroSD card 8GB with card reader. And a simple metal spatula. The set is quite standard, only tweezers are missing.

        Control unit

        While the printer is not assembled, let's look at the control unit. It opens from the bottom, the cover is held on by 4 screws. There is also a power supply and a control board.

        The power supply is quite standard for printers with this printable area, 24 volts 350 watts in a low profile case. However, unlike the Ender-3 Pro printers, it is branded here, but not MeanWell. The logo says Lian Lida, what kind of company, we, unfortunately, do not know.

        But the control board upset us a little. Despite the fact that Creality already has 32-bit boards on STM32 microcontrollers and they put them on the Ender-3. Here stands, one might say, an already outdated 8-bit board, also on a far from the most advanced Atmega1284 microcontroller.

        I am glad that the drivers soldered on the board are not noisy A4988, but already quiet TMC2208, although they are also not the most modern, and besides, they are connected in the so-called Standalone mode. This means that it is not possible to fully use their functionality. Well, okay, at least something.

        Assembly

        Let's move on to assembly. It's not complicated here, especially if you follow the step-by-step instructions. We fasten 4 vertical racks to the bottom.

        Install the portal from above and also fix it with screws.

        We fasten the Z-axis mechanism with 4 screws to the rear wall of the printer.

        And already to this mechanism we attach the table itself with the frame.

        On one of the vertical profiles we fix the extruder motor with the feeder on the screws with T-shaped nuts.

        We insert a Teflon tube into it and fix the fitting with a plastic bracket from the kit.

        Install the holder for the spool of filament under the feeder

        And a screen on the front of the printer.

        After that, it remains only to connect and route all the wires so that they do not interfere with the movement of the printer units. All wires are marked and there should not be any difficulties with this.

        Mechanical

        So, the printer is assembled. Let's look at it in more detail. We have already seen electronics and electrics, so let's move on to mechanics. The declared print area is 220 x 220 x 300 mm.

        The printer uses Cartesian kinematics, commonly called MakerBot after the company that first started using it.

        The kinematics are simple, quite reliable, but far from the fastest, since when the Y-axis moves, the X-axis motor moves along with the extruder and the beam.

        To move the X and Y axes, the OpenBuilds system is used, that is, rollers that roll on aluminum V-shaped profiles. 4 rollers on two Y-axis carriages and 3 rollers on the X-axis carriage.

        All carriages have eccentrics on one side to adjust the roller pressure.

        On any printers with this movement system, before the first use, check that the rollers are properly aligned and adjust them if necessary.

        The rollers must be pressed so that nothing dangles, but at the same time it is not pinched. After all, this will directly affect the quality of printing and the durability of the rollers.

        In our case, we only had to slightly loosen the X-axis carriage rollers.

        It also makes sense to check the belt tension. The X axis has one, its tension is carried out by shifting the return roller on a small area.

        The Y-axis has two belts, they are also tensioned, but it must be borne in mind that their tension should be as uniform as possible.

        Both axles are driven by NEMA17 motors. At the X axis it is normal, and on the Y with a through shaft, the motor itself is fixed in the center.

        The decision is quite logical.

        The Z axis is implemented differently. It runs on two 10mm shafts with linear bearings and is driven by a NEMA17 motor through an 8mm 2-way screw.

        The coupling connecting the motor with the propeller is rigid split.

        Plain brass nut fixed to the table platform.

        The platform itself is made of 4 mm aluminum sheet.

        There are no stiffeners, the platform is absolutely flat. At first glance, it doesn't look very reliable.

        But, looking ahead, we can say that this does not affect the quality of printing and stacking layers. However, it will not be superfluous to strengthen it.

        Heated table made exactly like Ender-3 Pro, 3mm aluminum sheet with glued magnetic surface. From above, a flexible substrate with an adhesive coating is “magnetized” to it.

        The wires coming from the table are not fixed in any way.

        Of course, with such kinematics, the table does not make constant fast movements, but it is still not safe.

        Printer calibration

        No table auto-calibration. We manually move the carriage around the corners and center of the table, placing a sheet of paper under the nozzle and twisting the large comfortable adjusting knobs until we achieve the same pressure over the entire surface. The leaf should move with little resistance.

        In general, the standard procedure.

        Design

        A bowden extruder is installed here, the feed mechanism is placed on the printer body, and the filament is fed to the hot end through a rather long Teflon tube.

        The feeder can be called already outdated - aluminum MK8, most manufacturers try not to use them and have long since switched to geared feeders like Titan or BMG, not to mention more modern solutions.

        MK8, of course, also works and performs its tasks, but has problems, for example, when printing with soft flex plastics. Adjustment of a pressing of the giving gear wheel to a counter roller is provided.

        The hot end is the same as the Ender-3, it is called CR10.

        Also not the most modern solution, however, this hotend performed normally on other models and, if used correctly, does not cause significant problems. The thermal barrier in the hot end is through, the Teflon tube goes straight to the nozzle.

        By the way, on such hotends, before the first printing, it is advisable to get a Teflon tube and check how it is cut off. The cut must be as even as possible, otherwise the tube will not be able to fit snugly against the nozzle, and plugs will occur.

        Our tube was quite straight, but just in case, we trimmed it.

        The top of the hot end is covered with a metal casing.

        A conventional 4010 axial fan is used to cool the hot end radiator, and a 4010 turbine fan is used to blow the model.

        The shroud is exactly the same as on the Ender-3. And it has a long-known minus, the radiator cooling fan blows down on the model and can cause difficulties when printing with plastics that are prone to shrinkage and do not require airflow.

        On the other hand, there are many alternative Ender blowers on the Internet, the only thing to consider is that the bottom bracket on the Ender-5 is longer than on the Ender-3, and many models of blowers are attached to the bottom bracket on the right.

        You need to choose a model that is suitable for this particular printer.

        As for the strength of the frame of the entire printer, everything is fine. Due to the use of a 20 x 40 mm profile as vertical posts, the entire frame is very strong and does not wobble at all.

        The printer is controlled using a simple 12864 non-touch screen with an encoder.

        This may seem like a disadvantage to some, but practice shows that such screens work stably, do not affect printing in any way, and also have a fairly large functionality.

        Print

        Turn on the printer and try to print. The power button, MicroSD card slot and MiniUSB port for connecting to a computer are located on the front side of the control unit, which is convenient.

        We send all the axes home and face the first oddity. The X and Y axis limit switches are on the right and rear, respectively.

        In this case, clicking on them assigns zero coordinates to the axes. Zero points are usually located on the left front and all slicers are designed for this location. As a result, by exposing models in the default slicer, they will be printed backwards. A strange solution, even if it was not possible to install the limit switches in another place, it was possible to configure the firmware so that when you click on them, not the initial, but the final coordinates are assigned. In general, not very convenient, but not critical.

        Test models

        Calibrated the table, refilled Tiger3D red PLA plastic and printed some routine tests. XYZ cube, Benchy boat, low poly fox and small vase in spiral mode. The models are standard, but from them you can immediately understand how well the printer can print. The speed was set to an average of 30 mm / s for the outer contours and 60 mm / s for everything else.

        The result was very worthy. The cube is even, the corners do not protrude, the layers are laid quite evenly, there is no echo, the deviations in size are insignificant within one tenth.

        Everything is fine with the benchy boat. There are no strings at all. Even the airflow was enough on a strong inclination in front, although it must be borne in mind that this side of the boat was turned directly towards the fan. The windows also turned out well, there are no hints of sagging.

        The fox was also printed with its muzzle turned towards the airflow, and it turned out perfectly. Everything is smooth, smooth. The seam of transitions between layers is almost invisible.

        And there are no complaints about the vase, the layers are laid evenly, there is not a single flaw on all surfaces.

        Model printing

        Filled with gray PLA + Tiger3D and tried to print a more interesting model. This is an easter egg from blogger Makers Muse. It consists of three parts that are printed in each other and do not touch each other. And after printing, these parts should be able to rotate. True, we increased the model to 200%, therefore the gaps between the parts also increased, but in any case, this is a rather complicated model.

        Most printed without any problems. From above, where strong slopes begin, difficulties appeared, the edges were bent upwards, the nozzle touched them and the thin high parts swayed a little. Because of this, bulging layers are visible in some places. However, the model was printed to the end and when removed from the table it immediately started working. All parts are free to move.

        The next model is also printed assembled. It is a folding box. Printed folded and has many moving joints. All parts are interconnected by small jumpers so that nothing falls during printing. Then they are removed from the printed model. There were no problems. Some of the layers that were in difficult areas are sticking out a little. But all the mechanisms work, nothing stuck together. The box unfolds and assembles as it should.

        We tried printing with Esun PETG. And then the first difficulties began. No matter how hard we tried, plastic constantly leaked from the nozzle during transfers. Neither different retract settings, nor temperatures, nor combing, nor even a change in print speed could save me. The walls of the models turned out well, but the lids were constantly underextruded, and strings formed in the holes.

        Having somehow picked up the settings, we ventured to print a larger model. Here is an elephant.

        This is not just a figurine, you can store cutlery in it.

        Its trunk is made in such a way that it hangs over the sink, and water from wet forks and spoons flows through it.

        Elephant is printed with supports underneath and under the ears. And also by mistake, we left supports inside the trunk. During the printing process, it was already clear that it was not perfect. When transferring, there were small streaks of plastic everywhere, especially inside. But it was possible to get rid of underextrusion on the lids.

        Supports from below and from the ears came off without problems. The trunk was more difficult. From below, the supports stuck quite strongly, and they had to be removed with side cutters. And it turned out to be very difficult to get support from the trunk in general. As a result, the elephant's trunk was accidentally broken and had to be glued back with super glue. I also had to remove plastic stains from the walls, although it was not difficult.

        In the end, this is the elephant. If you don't look closely, everything is fine with him. But on closer inspection, there are many small flaws. There are traces of sagging, the surfaces above the supports leave much to be desired. He can perform his tasks, but he looks so-so.

        The next thing we wanted to test with this printer was flex printing. After all, the feeder and the long Teflon tube, to put it mildly, are not very suitable for this.

        We took Esun eTPU 95A, it is not the softest and there was a hope that the printer could handle it. We printed a tire for a small typewriter. In the original, it is very small, so it was doubled. The speed was greatly reduced - 10 mm / s for external contours and 20 mm / s for everything else. Combing put up everywhere to avoid unnecessary transfers. And the printer coped with this task. Moreover, the tire turned out to be very high quality. Not a single gap, the layers are laid evenly, the lids closed normally. Even the seam is almost invisible.

        Decided to take a chance and doubled the print speed. And, unfortunately, the printer has not coped with this. At first, everything went fine, but soon the plastic jammed in the feeder and the printing ended there.

        It's a shame, though expected.

        Tiger3D Pink ABS has been loaded. You need to understand that on an open printer, and even with a through thermal barrier with a Teflon tube, printing with ABS plastic is not desirable and difficult. But it was necessary to try, besides, ABS from Tiger3D has a rather low print temperature, 235 degrees, like PETG. We decided to print some small modifications for the printer. The color is not very suitable, but at the moment it does not matter. The first is the mount for the table wires.

        For every firefighter they printed on a raft and with supports, the airflow was turned off. The model turned out well, the support and raft separated without problems, although the surface above the raft was not beautiful.

        The mount fit and holds the wires really well.

        The second model is a screen cover. The modification is purely decorative. It was printed already without a raft on a clean table. The cover stuck well, and even the corners did not bend during printing.

        The overall quality is very decent. Except that in some places there were small smudges of plastic during transfers, but they turned out to be easy to clean.

        The cover is designed for the Ender-3 printer, and as it turned out, it does not quite fit the Ender-5 Pro. On the one hand, it protrudes a little.

        The third model is unpretentious, it is a wheel for the feed mechanism, it makes it more convenient to manually push through the plastic, and during printing you can see how the feed takes place.

        The wheel turned out well, fit well, works as it should.

        And the last model is a slightly improved airflow.

        It printed well, although during installation it turned out that it was a bit short and pressed against the heating block. It will work for a while, but will most likely melt quickly, especially if you print with the blower turned off.

        And finally, we decided to print a detailed art model, Kratos from the game God of War, perhaps one of the most beautiful plastics we came across. Esun eSilk copper color. The layer height was made 0.12mm. The model is printed without supports, in some places it has strong slopes, just check the effectiveness of the new airflow.

        Kratos turned out just fine. On this plastic, in general, even the slightest flaws are very clearly visible due to the fact that it reflects light. And any protruding layer or gap immediately catches the eye. Here everything is smooth, the layers are almost invisible. It seems that the model is polished to a shine. The seam stands out a little, but you can't get away from it, especially with such a long Teflon tube.

        Review summary

        Okay, let's summarize. The printer is not perfect. Some solutions are very outdated, and the Creality Ender-5 Pro is just asking to be modified. The community of this printer is quite large and there will definitely not be a shortage of ready-made models. In addition, some models for modifications come from Ender-3. Even the control board of the printer has something to change, almost all companies producing control boards have already released versions specifically for Enders. Simply switch all the wires, install the new board in the old place and you're done.

        Despite its simple extruder and feeder, the Ender-5 Pro does the job well. We had difficulties only with PETG plastic. Even with medium hardness flex at low speeds, the printer can print normally.

        The printer housing is strong and durable. Any plastic is glued to the magnetic substrate without any problems, and it is easy to remove the models. The substrate itself does not peel off from the table, even when printing with ABS plastic and a temperature of 100 degrees.

        Learn more