Ctc 3d printer enclosure

▷ ctc 3d printer enclosure kit 【 STLFinder 】

Türscharniere CTC 3D Printer

thingiverse

Türscharniere für den CTC 3D Printer. Mal eher unauffällige... ...Desweiteren benötigt man noch 4 Stück M3 40mm schraube

CTC 3D Printer Filamenthalter

thingiverse

It is a holder for 1,75mm Filament. ...--New holder with a more stable tube for the Filament-- CTC Printer with 5mm wooden case. ...You just have to clip it on the back of your Printer.

Ctc 3D printer foot

thingiverse

Print Settings Printer: CTC Bizer Rafts: No Supports: No Resolution: 0. 2mm Infill: 30% Notes: Printed in PLA at 220C with 50C bed Custom Section UPDATE:1 I installed an RGB led strip on the printer to illuminate the build area, but the mighty board...

CTC 3D Printer Oiler

thingiverse

This meant when I wanted to move the filament spool from the CTC printer to the Prusa I would have a lot of oil left on the unused filament when I unloaded it. I don't want to put oiled filament into my Prusa printer. This oiler was designed to...

Feet for CTC 3D-Printer

thingiverse

Standfuesse für CTC 3D-Drucker

CTC 3d printer Filament rolle

thingiverse

Filament holder for CTC 3d printers. ...Put these in the 3 cm hole in the back of your printer Filamenthalter für CTC 3d printer. ...Drück diese halterung in die 3 cm löcher hinten

CTC 3D Printer. Tools Holder

thingiverse

CTC 3D Printer tool holder Used to hold screws. allen keys. razer blades etc. clips onto the side of the printer top or bottom. infill 10% shells 2 layer height 0.25 settings i used to print. ... print time was 4 hours

CTC 3D printer top spool holder

thingiverse

Another spool holder, on top for CTC 3D Printer

CTC 3D Printer Warning Sticker Cover

thingiverse

a simple cover for the ugly warning sticker on ctc 3d printers.

Spool Holder for CTC Dual 3D Printer

thingiverse

Another spool holder for the CTC 3D Printer. ...Only one part, fast detachable. Customizable .ipt file on request. Print Settings Printer: CTC Dual 3D Printer Rafts: Doesn't Matter Supports: Yes Resolution: Doesn´t Matter Infill: 20%

FILAMENT HOLDER FOR CTC 3D PRINTER

thingiverse

FILAMENT HOLDER FOR CTC 3D PRINTER The clip is a bit large, but it's work perfectly . New Tube. I juste upload a version for the original ctc holder tube. ... if you need something please tell me !

CTC 3D Printer Heated bed Glass holder

thingiverse

This is corners for heated bed for CTC 3D printers (Replicator). I use HomeDeport mirror tiles (they 2.9mm hight) and cut exact size as heated bed. Can be cut bit bigger and adjust on corners. ... Printed in ABS.

Glass Slide Holder for CTC 3D Printer

thingiverse

I oftentimes find it easier to slide glass plates in and out than having to clean and maintain the stock kapton and blue printers tape that come with my CTC 3D printer. At first, I was just setting my glass plates aside but then I thought why not...

Filament Guide for CTC 3D Printer

thingiverse

Once printed, just like the picture mount on the top of your CTC 3D Printer on the wooden part that "mounts" the metal rods which guide your build platform. My settings when printing: Infill: 20% Shells: 2 Layer Height: .20mm Use supports if you...

CTC 3D Printer - Need help please

thingiverse

Hi i got my ctc 3d printer a couple of days ago. it is working really well. when doing anything with the Z axis but when it does x/y one of them is messing up and circles come out oval (top left and top right) of circle have a gap in them and wonky...

CTC 3D Printer DTI Mounting Beam

thingiverse

On my 3D printers I prefer to run with a very Level Bed, but mounting the various other designs just didn't seem to fit the CTC Makerbot Clone, so here's one that works. Trying to mount a DTI external to the extruders just wasn't going to work for...

3D-printer vent kit

thingiverse

It uses a big swivel nut which let you alternate between connecting your 3d printer to the outside or a regular vent valve. On the wall mount you either thread on the hosepart or the rosette valve. ...

3D printer kit

cults3d

Profiler 1. ...1½: 2. 2½. 3. 3½ 4. 4½ double or single type pulley compatible with standard printer belts.

Transparent CTC 3D Printer Filament Tube Holder

thingiverse

I made these for my Transparent Acrylic Case CTC printer that I got from Ebay in February 2014. . it's been a great printer, but it had no place for Filament Tubes to mount.. These pieces keep the filament tube farther back and higher than usual...

CTC 3D Printer Reprap DIY Prusa i3 Kit Support

thingiverse

For the second part you need to mirror it. Hope it will help you . ...:)

CTC Prusa -> Very solid 3D-Printer

thingiverse

39mm height) -BQLZR HV-156-1C25 AC 250V 15A Micro Limit Switch SPDT CNC Roller 3x -DC 12V Power Supply (240W) -40x40mm Fan 3x -70x70mm Fan -775 DC 12V-36V 3500-9000RPM Motor with Ball Bearing + Power Supply -12V-40V 10A PWM DC Motor speed controller. ..

Gruppo completo Estrusore per CTC 3D Printer - Complete group Extruder for CTC 3D Printer - High quality

thingiverse

Gruppo completo Estrusore per CTC 3D Printer per MK7. Cuscinetto a sfere SKF-623 (Ø10xØ3x4mm). Molla Øest=9mm - Øf=1mm - L=19/20mm. Complete group Extruder for CTC 3D Printer for Mk7. Ball bearing SKF-623 (Ø10xØ3x4mm). Spring Øout=9mm - Øw=1mm -...

MBot Cube 3D Printer Kit

thingiverse

MBot 3D Printer Cube Kit, IKEA Style Instructions The most perfect 3d printer kit in the history. Not only the risk of the damage en route will no longer exist, but also it is even the crystallization of continuing perfection of design and the...

3D Printer Drill Kit Holder

thingiverse

I bought the Daewon 3D Printer Clogged Extruder Nozzle kit from amazon. I assumed that the drill screwdriver and bits would come in some kind of holding kit. Unfortunately, even though the bits come in a plastic case, the driver comes as a separate...

CTC Bizer 3d printer (2.nd / 2017) Filament holder

thingiverse

Spoole holder for the CTC dual extruder 3d printer

CTC Printer stabilisation

thingiverse

Für bessere Stabilisation des CTC Printers.

3D printer fume extractor kit

cults3d

This is an extractor system for your 3D printer, it uses a 70x70 by 25mm fan and standard 4 inch dryer vent hose. The main component is the inline fan holder, there are also flange plates, to interface the hose to various surfaces. I suggest using...

3D printer fume extractor kit

thingiverse

3D Brooklyn Printer Calibration Kit

pinshape

3D Brooklyn Printer Calibration Kit for the Pinshape Community Reference for the design phase to measure certain printed geometries to give an idea of minor changes and how to work around them when designing. Used for: quickening prototyping and...

3D Printer Scanner 2in1 kit

thingiverse

Hardware I use: 3D printer: unofficial replicator: migcecuble Camera: Logitech 5 mega-pixel smartTV camera/Logitech PRO9000 web camera (all $40 ebay) Laser: 5mw 650nm red light laser/5mw 405nm blue laser transmitter with the diameter of 12mm ($25. ..

ctc enclosure - 3D Printers - Talk Manufacturing

trigger99 August 19, 2016, 9:41pm

hi am building a enclosure for my printer and i using a clear plastic storage box for the top

i need to no if i need for exhaust fan or will i lose my temperature by having one

MindFuLL August 19, 2016, 10:55pm

The temp in the chamber can usually be regulated by the temp the the heated bed. If you want to have more control it’s very easy to add an exhaust fan but I would hook it up to a temperature controlled switch(the kind used for green houses) for $20-30. You set the temp and it will turn on when above and shut off when below.

-Jesse

Don_White August 20, 2016, 11:39pm

Criticalmods.com sells them with or without the fan kit. I would say you would be fine either way.

Iceman24k August 21, 2016, 2:18am

I wouldn’t use an exhaust with ABS, and for PLA I would print with it off.

ebam August 21, 2016, 11:24am

Where is your box from and what size is it please? I have been wondering how to create something like this for a nominal cost to hopefully help with ABS warping. I have seen many guides and ideas to cheaply make front doors etc but nothing for the top.

trigger99 August 21, 2016, 11:54am

16l litre box from ebay
but you have to cut it

1 Like

trigger99 August 21, 2016, 2:08pm

this is how i did it thanks for someone giving me a idea on here

i used a 16 litre box cost me £7.49 from ebay

Iceman24k August 21, 2016, 4:39pm

I like the Idea of the box everyone is talking about on here! but for what it is worth, the Qidi Printer’s top acrylic cover kit will fit perfect… They were about 20 bucks each, but I think they finally raised the price a little lol…also instead of mounting with screws on the side panels, I glued on magnets and this works well.

trigger99 August 21, 2016, 5:14pm

magnets is a Great idea thanks

Cody_Thierauf September 7, 2016, 2:19am

#10

What is the point of the box? Is there any pro’s? I’m new to the 3d printing scene and considering buying one of these machines.

trigger99 September 7, 2016, 5:20am

#11

if you want to print abs which is the most common plastic that we use today so to print it you need high temperature

or your work pace wan’t stick

Cody_Thierauf September 7, 2016, 1:25pm

#12

ah so you enclose it to keep the heat inside

CTC fixture with LCD display and keyboard, with tool boxes and bit holder for tools

Screw cap / cap for BMW vehicles

Free

P3 RGB Matrix 64x32 Frame

Free

CNC 3018 Side Guards

Free

DIY "Phantom" LED Mount for BMW Z4 E85

Free

W5W (T10) Male Socket

Free

Pi Camera Base Mount

Free

Yale Thumb turn with wings

Free

WS2812B Projector fairing ring mount

Free

The best files for 3D printers in the Tools category

Zortrax Filament Tube Holder

Free

SMOKE TRAP(MASON JAR BONG)

Free

Coronavirus Covid-19 Emergency Face Mask, The Friendship E-Mask

Free

Porte bobine witbox

Free

Fun toothpick dispenser

Free

INDICATOR FOR BETTER BED LEVELING FOR ENDER 3 V2

3. 19 €

Laptop Legs

Free

MISCELLANEOUS CABLE REEL

Free

Bestsellers in the Tools category

INDICATOR FOR BETTER BED LEVELING FOR ENDER 3 V2

3.19 €

UNIVERSAL BED LEVELING INDICATOR FOR VERY ALL

PRINTERS

3.19 €

Housing FLSUN SR

8,50 €

Scissor Paint Rack (Citadel)

5.66 €

Printer boxes for Ikea Lack Table

1,99 €

Cooling system Minimus Hotend

2.52 €

PRECISE DIAL INDICATOR 3D PRINT DIY

1,85 €

Quick print ink bottle holder (6 sizes)

2.88 €

FAST PRINT STACKING STORAGE BOXES STACKING CONTAINERS

~~€1. 50~~ -fifty% 0.75 €

INDICATOR FOR BETTER BED LEVELING FOR ENDER 3 PRO

3.19 €

NASA BOX

2.05 €

Chill Buddy 9 lighter case0004

1.01 €

Version 2 Alligator 2 || Repeating crossbow || 3d printed shop || Inspired by Joerg Sprave

1.50 €

Filamentmeter

2,80 €

Ender 3, 3 V2, 3 pro, 3 max, dual 40mm axial fan hot end duct / fang. CR-10, Micro Swiss direct drive and bowden compatible. No support required for printing

1.68 €

Paint stand with scissors

5.62 €

Do you want to support Cults?

Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so it is very easy to support us in maintaining activities and creating future developments. Here are 4 solutions available to everyone:

AD: Disable your AdBlock banner blocker and click on our banner ads.
AFFILIATION: Shop online with our affiliate links here Amazon.
DONATIONS: If you want, you can donate via PayPal here.
* INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!

Free 3D file CTC A13 Rope chain attachment Y-axis and Z-axis・3D printing plan for download・Cults

PlayStation 5 controller stand

Free

CTC-A13 SKR E3 Case

Free

Holder TFT35 V3 Ender 3 / Ender 3 pro

Free

CTC A13 Side spool holder

Free

3DTouch cover

Free

Display mount offset CTC A13

Free

CTC A13 Raspberry Pi Case

Free

Enclosure SKR 1.

3 / 1.4 for CTC A13

Free

The best files for 3D printers in the Tools category

Bottle cutter

1.30 €

Straw Holder for PET Bottle Caps

Free

Reel unwinder - Spool Holder

Free

Writing instrument for children with movement disorders

Free

MAKER'S VALET - tape dispenser and card/part holder

2,55 €

SD Card Mountain

Free

BIG SPOOL (3Kg) IKEA Skadis spool holder with bearings

Free