(506) 2240-6804
Blue printer 3d
Blueprinter M3 - Powerful & Quiet Selective Heat Sintering 3D Printer is Unveiled - 3DPrint.com
The Blueprinter development process began in 2008 when Frederik Tjellesen and Anders Hartmann, as engineering students at the Technical University of Denmark, wrote a thesis which attempted to demonstrate that it would be possible to make 3D printers available to smaller businesses. At the time, few companies were prepared to take on the costs involved in printing 3D prototypes, but Tjellesen and Hartmann were determined to make the technology available to manufacturers, architects, engineers and educational institutions.
As the pair began their manufacturing efforts in 2009, little did they know it would be another three years until the first Blueprinter was introduced to the public in Birmingham. But by summer 2013, the pair had completed their first beta program and twelve printers were installed.
As of January 2014, the team had made the first Blueprinter available to the market. Now the Danish 3D printing pioneers have launched the next generation of their machine.
This latest machine, Blueprinter M3, includes smoother lines and an increased build volume. It’s also been highly optimized for daily use and to be much more user-friendly. The company says the noise output of the M3 has been reduced by some 60% meaning that it is now as quiet as a standard 2D printer – and it uses less power as well. Additionally, enhanced mechanisms used to drive the powder shovels and new powder drawers make the M3 more capable of printing accurate and more detailed parts. An increased build volume – now 200mm x 157mm x 150mm – allows for the production of multiple parts in a single print run as well.
Frederik Tjellesen and Anders Hartmann
Last but not least, a stiffer chassis has been developed which represents a 40% improvement over the previous version, a new lid hinge mechanism with damping has been installed and the company says that this latest design improves service access for maintenance tasks as well.
The M3 uses what the company calls SHS – Selective Heat Sintering – a technology which utilizes a thermal printhead rather than the laser used in a typical SLS machine. This thermal printhead applies heat to layers of thermoplastic powder within the build chamber and is capable of building objects with complex geometrical shapes which feature a minimum wall thickness of 1 mm.
Blueprinter says that, once a print run is complete, the entire build can be removed and the printer resets to begin printing again within 5 minutes. The Blueprinter M3, the cleaning station and 12 kgs of M-Flex powder retail for € RRP 25,450.00 or a little over $28,000, putting this machine somewhere in the middle of the 3D printer market. Let us know your thoughts on this new machine in the Blueprinter M3 forum thread on 3DPB.com. Be sure to check out the video below:
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
Tagged with: Anders Hartmann • Blueprinter M3 • Frederik Tjellesen • powder 3d printers • SHS 3d printing technology
Please enable JavaScript to view the comments powered by Disqus.
Blue best 3D printer models・Cults
Orange from Rainbow Friends - ROBLOX. Two STL Model.
€1.55
wednesday
€2.40
Boxi Boo Bot
€2.40
Boxiboo
€2.40
Bron the Dinosaur
€1.54
Bunzo Bunny
€1.54
Rainbow Friends Blue Blue
€1.39
Blue mage keycap mx
€0.95
"Sloth" The binding of Isaac Deadly Sin
€2.
98
"Envy" The Binding of Isaac Deadly Sin
€2.98
Mario Funko Pop
€2.40
Majoras Mask
€1.54
Shiba
€1.54
candle holder - OM
€1.20
All Short Renegade battle barrels
€4.59
Changing Renegade Battle Barrels
€1.38
DACIA DOKKER 3D PRINT MODEL
€45
Sega Dreamcast Adapter for MAPLE, PS2 Keyboard Mice adapter
Free
Merlina_Hand
€2.40
MMPR - Blue Ranger Power Lance
€18. -30% €13.02
61
MMPR - Power Rangers - Power Morpher - Cosplay Prop - 3D STL File
€19.77 -30% €13.84
MMPR - Blue Ranger Helmet - Cosplay Prop - 3D STL File
€34.90 -50% €17.44
GALLARDO RIM MODEL STEP AND STL DATA
€20
MERCEDES VITO 3D PRINT MODEL
€15
HYUNDAI ACCENT ERA 3D PRINT MODEL
€30
TOGG SEDAN 4 DOOR AUTOMOBILE 2022 3D PRINT/ 3D YAZICI
€30
Blue Dimond
€0.
52
Peacock 3D Print 3D model
€6
Purple
€1.54
Sonic
€1.54
Bunk Bed
€11.50 -10% €10.35
BLUE LOCK - YOICHI ISAGI
€8
Rainbow friends ( ORANGE) flexy
€2.85
Zelda type board
€0.50
Weezer Text Keychain
€1.42 -33% €0.95
Ford mustang blue
€2
Snowball Tripod Extension 50-200mm
€1.
42
Strudel bowl to wash gold / Blue bowl to pan for gold
€4 -50% €2
HYUNDAI ACCENT 2018
€14.99
SNOW Napkin Holder Dispenser
€1.28
BabyHuggy
€1.54
Spartan_ Hallo
€1.54
Quaxly Low Poly
€2.37
BLUE RAINBOW FRIENDS
€1.39
RED
€1.54
Digger
€1.54
Launchers
€1.54
HYUNDAI ACCENT ERA 3D PRINT MODEL
€17
3M Scotch Blue Tape
Cart is empty
Site search
Home / Catalog / Tools and materials / Treatment BEFORE and AFTER / 3M Scotch Blue Tape
Buyer info:
- Shipping info
- Payment info
For more information about the product, please contact our consultants
+7 (8182) 637-737
The most recommended "blue tape" for your 3D printer! With this high quality adhesive tape, you can cover the entire surface of the 3D printer's print platform.
Weight types of the most popular 3D printer filaments stick perfectly in this strong adhesive tape, but also come off easily when the 3D printing is finished. You can remove the tape with ease, without rough residue or damage to the surface of the 3D printer's print bed. The strips are 5 cm wide, you can easily stick them on the printing platform of any of the 3D printers in a couple of minutes.
Main advantages:
- Ideal for home 3D printer;
- Significantly reduces warping;
- Easy to remove;
- Does not leave small roughness after removal;
- Easy to re-glue;
- Durable, durable;
- Suitable for all platform sizes;
- Original from USA manufacturer;
- Dimensions: 5 cm x 50 m;
- Printing with ABS plastic on a heated table;
- Unheated PLA printing;
- 10-11 stripes are enough to cover the table;
- The press can be made repeatedly on one place without damage of a covering;
- If the coating does wear out, just replace as many strips as needed;
- The surface of the product is smooth;
- Easy separation of the product from the table after printing.
Main characteristics
| Country of origin | USA |
| Country of origin: | US |
Other offers:
- Dichloromethane (methylene chloride) - PLA, ABS solvent
Price:
- 3D varnish for 3D printers Lac Impresion 3D Volume: 400 ml
Price:
- Fixit Laser Levelpro3 8ft/250cm
Price:
- BENETECH infrared thermometer with laser meter
Price:
Bestfilament blue plastic for 3D printers 1.
75 mm, 1 kg, Plastic for 3D printer Bestfilament blue PLA plastic for 3D printers 1.75 mm, 1 kg 02 mm!
PLA plastic Bestfilament is an easy-to-use material that is perfect for printing large-sized products, as well as parts for which it is important to accurately convey geometric dimensions.
Unlike ABS, it does not require special conditions, there is no need for a heated table or a thermal stabilization chamber.
In addition, PLA plastic does not have an unpleasant odor, which makes it suitable for use in a home or office environment.
The most sustainable plastic. Ideal for printing interior items that require meticulous detail.
Benefits of PLA Bestfilament:
Non-toxic
No heated bed required for printing
Dimensional stability
Excellent glide of parts
Energy savings due to low softening temperature of the filament
No need to apply a coating to improve adhesion
Smooth surface of the printed product
origin.
Unpretentious in operation material, perfect for printing large-sized products, as well as parts for which it is important to accurately convey the geometric dimensions. Unlike ABS, it does not require special conditions, there is no need for a heated table or a thermal stabilization chamber. In addition, our PLA plastic has no unpleasant odor, which makes it suitable for use in home or office environments.
Specification Blue Bestfilament PLA plastic for 3D printers 1.75 mm, 1 kg:
Bar color: blue
Gross weight: 1.35 kg
Net weight: 1 kg
Material type: PLA
Recommended printing parameters for PLA Bestfilament:
Extruder: 190-215 degrees
Platform: 40-60 degrees
Solvents: Dichloromethane
Tip from Bestfilament:
plastic and cork formation. To avoid such a situation, it is necessary to provide maximum airflow to the thermal barrier radiator.
Also, when printing with PLA plastic, you can use a foam filter with a small amount of oil (machine or vegetable).
