Home » Misc » Best cheap 3d printers 2023

Best cheap 3d printers 2023


The Best Cheap 3D Printers for 2023

While we'd hesitate to call 3D printing a mature technology, you might say it has reached its teenage years. Through their first decade-and-change, 3D printers have come down in price, grown easier to set up and operate, and become more reliable. And you may pay less than you expect: Many once-high-end features have migrated down to inexpensive models.

PC Labs has been reviewing 3D printers since 2013. Today, the state of 3D printing is strong, but that wasn’t always the case. For the first several years, it was often an adventure getting one of these printers up and running, let alone successfully through our testing regimen. Issues with filament-based—aka fused filament fabrication (FFF) or fused deposition modeling (FDM)—printers were abundant.

Filament feeders had to be coaxed into delivering filament from the spool to the extruder. Print beds had to be manually aligned. The extruder or hot end had to be positioned just right to minimize the gap between the nozzle and the build plate (the flat surface on which the object is printed). Objects frequently stuck to the build plate, and required careful, sometimes unsuccessful, efforts to pry them off. These and other issues required painstaking effort to resolve, often combined with calls to tech support.

Not so much anymore. While they can still be rebellious at times, 3D printers have grown up a lot, and achieving the 3D printer basics has gotten a lot less likely to end in a shouting match over small things. And they've gotten a lot more affordable, too, for curious DIY-ers and hobbyists to try.

If you're in the market for a beginner or low-cost 3D printer, it's important to know how lower-end models differ. Read on for mini-reviews of the top budget 3D printers we've tested. After that, we go into more detail on understanding the 3D printer specs and tech relevant to beginning buyers. Ready to take the plunge? Read on.

Deeper Dive: Our Top Tested Picks

Original Prusa Mini

Best Overall Budget 3D Printer

4.5 Outstanding

Bottom Line:

It requires assembly and calibration care (plus shipping from the Czech Republic), but the Original Prusa Mini is a compact, open-frame 3D printer that consistently produces superb-quality output for a great price.

PROS

  • Top-notch object quality
  • Supports a variety of filament types
  • Useful, professionally printed user guide
  • Great support resources
  • Versatile, user-friendly software

CONS

  • First-layer calibration can be tricky
  • Only includes starter packets of filament
  • Requires monitoring if young children or pets are around

Sold By List Price Price
Prusa Research $399.00 $399.00 See It (Opens in a new window)

Read Our Original Prusa Mini Review

XYZprinting da Vinci Mini

Best Budget 3D Printer for Schools, Community Centers

4.0 Excellent

Bottom Line:

The XYZprinting da Vinci Mini is a consumer-oriented 3D printer that provides a winning combination of low price, ease of setup and use, solid print quality, and smooth, misprint-free operation.

PROS

  • Very low price.
  • Reasonably priced filament.
  • Good print quality.
  • No misprints in testing.
  • Easy setup and operation.
  • Quiet.
  • Prints over a USB or Wi-Fi connection.

CONS

  • Occasional problems in trying to launch prints.
  • Removing printed objects from the print bed is sometimes tricky.

Sold By List Price Price
Amazon $199.95 $199.95 See It (Opens in a new window)
Walmart $199.95 $198.95 Check Stock (Opens in a new window)

Read Our XYZprinting da Vinci Mini Review

Toybox 3D Printer

Best Budget 3D Printer for Children

4.0 Excellent

Bottom Line:

The Toybox 3D Printer works well as a model designed for children, offering reliable printing from a browser or mobile device and a few thousand toys to print, plus creative options to output drawings or photos. Just bear in mind the tiny build area.

PROS

  • Reliable, misprint-free printing
  • Easy setup
  • One-touch operation
  • Well-composed help resources
  • Access to more than 2,000 printable toys and projects
  • Lets you create your own printable designs

CONS

  • Tiny build area
  • Not ideal for importing 3D files created elsewhere

Sold By List Price Price
Amazon $299.00 $299.00 See It (Opens in a new window)
Toybox Labs $379.00 $299.00 See It (Opens in a new window)

Read Our Toybox 3D Printer Review

Monoprice Mini Delta V2 3D Printer

Best Budget 3D Printer for Beginners, Non-Techies

4.0 Excellent

Bottom Line:

3D printing gurus will be intrigued by the Monoprice Mini Delta V2's use of the delta rather than Cartesian coordinate system, but beginners will just enjoy its low price, ease of use, and speedy printing.

PROS

  • Sub-$200 price
  • Quick, nearly misprint-free printing
  • Easy setup and operation
  • Sturdy steel-and-aluminum frame
  • Supports multiple filament types

CONS

  • Tiny build area
  • So-so print quality
  • Mere one-year warranty

Sold By List Price Price
Amazon $179.99 $179.99 Check Stock (Opens in a new window)

Read Our Monoprice Mini Delta V2 3D Printer Review

Anycubic i3 Mega S

Best Budget 3D Printer With an Open Design, Big Build Area

3.5 Good

Bottom Line:

The Anycubic i3 Mega S, an inexpensive open-frame 3D printer, produced decent-quality prints in our testing. To get the most out of it, though, may require precise calibration.

PROS

  • Modestly priced
  • Large build area for an inexpensive printer
  • Supports a variety of filament types
  • Generally solid print quality
  • Uses well-known Cura software

CONS

  • Finicky print-platform alignment
  • Supported coils of filament are small
  • Poorly placed spool holder

Sold By List Price Price
Amazon $229. 98 $229.98 Check Stock (Opens in a new window)
AnyCubic $279.00 $279.00 Check Stock (Opens in a new window)

Read Our Anycubic i3 Mega S Review

Anycubic Vyper

Best Budget 3D Printer for the Biggest Build Area Possible

3.5 Good

Bottom Line:

Anycubic's modestly priced Vyper whips up large 3D prints on its open-frame design, and provides automatic print-bed leveling. Just know that some minor assembly is required—and printed objects may require a bit of cleanup.

PROS

  • Relatively large build area
  • Automatic bed leveling
  • Simple assembly

CONS

  • Short (one-year) warranty
  • Includes only a small starter filament coil
  • Using Cura software with the Vyper requires tweaking a couple of settings
  • Test prints showed some "hairy" filament residue

Sold By List Price Price
Amazon $499. 00 $429.99 See It (Opens in a new window)
AnyCubic $369.00 $319.00 See It (Opens in a new window)

Read Our Anycubic Vyper Review

Creality Ender-3 V2

Best Budget 3D Printer for Tinkerers and DIY Types

3.5 Good

Bottom Line:

Hands-on tweaking defines Creality's budget-price Ender-3 V2, an open-frame 3D printer that you build from a kit. It produces generally above-par prints, but its print bed can be tricky to keep leveled.

PROS

  • Inexpensive
  • Slightly above-average print quality
  • Good-size build area for its price
  • Supports several filament types

CONS

  • Manual print-bed leveling can be tricky
  • Setup instructions could be deeper, more legible
  • Questionable quality control on some parts

Sold By List Price Price
Amazon $499. 00 $499.00 See It (Opens in a new window)

Read Our Creality Ender-3 V2 Review

Flashforge Finder 3D Printer

Best 3D Printer for the Very Tightest Budgets

3.5 Good

Bottom Line:

The Flashforge Finder 3D Printer is moderately priced and offers good print quality, but it proved tricky to get up and running in our tests.

PROS

  • Quiet.
  • Good print quality.
  • Connects via USB 2.0 cable, USB thumb drive, or Wi-Fi.
  • Reasonably priced.

CONS

  • Some objects pulled off the platform during testing.
  • Poor documentation.
  • Modest build volume.
  • Limited to printing with polylactic acid filament (PLA).

Sold By List Price Price
Amazon $259.90 $259.90 Check Stock (Opens in a new window)

Read Our Flashforge Finder 3D Printer Review

Polaroid PlaySmart 3D Printer

Best Budget 3D Printer for Dabbling in Small Objects

3. 5 Good

Bottom Line:

The Polaroid PlaySmart 3D Printer is a compact, stylish 3D printer with above-par overall print quality, but, alas, a tiny build area for the money.

PROS

  • Small, lightweight for a desktop 3D printer.
  • Easy to set up and use.
  • Supports PLA, PETG, and wood composite filaments.
  • Multiple-color support.
  • Wi-Fi camera monitors print jobs.
  • Prints from USB drives, SD cards, or mobile devices.

CONS

  • High price for its capabilities.
  • Small build area.
  • Too-brief warranty.

Sold By List Price Price
Amazon $699.00 $699.00 See It (Opens in a new window)

Read Our Polaroid PlaySmart 3D Printer Review

XYZprinting da Vinci Jr. 1.0 A Pro

Best Budget 3D Printer With Closed Design, Roomy Build Area

3. 5 Good

Bottom Line:

The XYZprinting da Vinci Jr. 1.0 A Pro is a moderately priced closed-frame 3D printer with a large build volume and overall good performance, but a potentially balky filament-feeding system.

PROS

  • Spacious build area
  • Works with third-party filaments
  • Self-leveling print bed

CONS

  • Build plate is not heated
  • Limited to PLA- and PETG-based filaments
  • Guide tube is prone to detaching

Sold By List Price Price
Amazon $249.95 $219.95 See It (Opens in a new window)
Best Buy $449.95 $449.95 Check Stock (Opens in a new window)

Read Our XYZprinting da Vinci Jr. 1.0 A Pro Review

Monoprice Voxel 3D Printer

Best Budget 3D Printer for Cheap Filament

3. 0 Average

Bottom Line:

The Monoprice Voxel is an under-$400 3D printer that's easy to set up and use. It exhibits generally good print quality, but it was unable to print two of our test objects.

PROS

  • Easy to set up and use.
  • Budget price for printer and filament spools.
  • Supports PLA, ABS, and several composite filament types.
  • Versatile software.
  • Prints over Ethernet or Wi-Fi, or from a USB thumb drive.

CONS

  • Frequent misprints on certain test objects.
  • Slightly balky touch screen.

Sold By List Price Price
Amazon $583.74 $583.74 See It (Opens in a new window)
Walmart $429.99 $369.26 Check Stock (Opens in a new window)

Read Our Monoprice Voxel 3D Printer Review

Buying Guide: The Best Cheap 3D Printers for 2023

How to Buy a Cheap 3D Printer

The biggest changes to 3D printers over the last few years have come to the cheaper models. Nowadays, many of those classic, ornery 3D-printing issues have been resolved (most of the time, anyway), even for consumer and bargain-priced 3D printers. Automatic print-bed leveling is the norm, and you can usually remove 3D-printed objects from heated and/or flexible build plates with a minimum of coaxing. And most 3D printer manufacturers have either developed and refined their own software, or have adapted an open-source printing platform such as Cura(Opens in a new window).

(Credit: Zlata Ivleva)

What separates more expensive 3D printers from cheap ones ("cheap" defined as $500 or less, for the purposes of this article) is often a select group of features. These include the build volume, the type of frame, the varieties of supported filament, the software, and the connectivity mix. Let's run through those in turn.

What's the Right Build Volume for a 3D Printer?

A 3D printer’s build volume is the maximum dimensions (HWD) of a part that it can print. (We say “a part” because a 3D-printed object can consist of multiple parts that are printed, then glued or otherwise pieced together.) While the smallest build volume of any 3D printer we have tested is 3.9 by 3.9 by 4.9 inches, we consider any build volume smaller than 6 by 6 by 6 inches to be small, any between that and 10 by 10 by 10 inches as medium, and any printer with at least one build dimension of more than 10 inches as having a large build volume.

(Credit: Molly Flores)

As a general rule, inexpensive 3D printers have small build volumes, while more expensive ones have larger build volumes. This depends in part on the type of printer. Closed-frame 3D printers—and most semi-open models, which have a rigid top, base, and sides but are open in front and, often, back—tend to have small build volumes, while open-frame printers, lacking as rigid a physical structure, often have relatively large build volumes for the price. You'll want to weigh the build volume against the kinds of objects you will print.

Should I Get an Open-Frame or Closed-Frame 3D Printer?

Which brings us to the frame "form factor" question: open-frame versus closed-frame. Closed-frame 3D printers are boxlike devices, with a rigid base, walls (with a see-through door in front), and top. Among their advantages? They muffle the operating noise, as well as reduce the odor from melted filament (which is potentially an issue with ABS plastic), and they provide some protection for people or pets who might inadvertently touch the hot extruder. A downside: They tend to have smaller build volumes than open-frame 3D printers, which have fewer (often, no) walls to constrict them.

(Credit: Zlata Ivleva)

Low-cost 3D printers include both open-frame and closed-frame models, as well as a few stereolithography printers. If a relatively large build volume is a priority, you’re likely to get more bang for the buck with an open-frame model. Open-frames do have some clear downsides by definition: They tend to be noisy, emit odors when certain plastics are melted, and provide little protection for someone who might touch the hot extruder.

(Credit: Molly Flores)

Also, recognize some potential negatives of open frames, depending on the model. Some require assembly, being essentially kits, and most require more setup care than a closed-frame printer, plus more maintenance to keep them running smoothly. Still, these very traits should not deter—and may even appeal to—hobbyists and DIY folks.

What Should I Look for in 3D Printer Software and Connectivity?

Gone are the days when tinkerers had to cobble together several different programs to get a 3D printer to run. Manufacturers either include their own 3D printing program or modify an existing platform such as the open-source Cura.

3D printing software performs three main functions: processing an object file (resizing, moving, rotating, and in some cases duplicating it), slicing it (into virtual layers, based on your chosen resolution), and printing it. These are almost universally combined into a seamless process. Some high-end printers have software that supports a wider range of settings you can tweak, but even the basic suites work at least reasonably well.

More likely to vary among the cheaper set is the array of connection options from model to model. Nearly all have a USB Type-A port to fit a thumb drive for printing from document files. Most also have a USB Type-B port for connecting directly to a computer, and some offer Wi-Fi, too (or as an alternative), while a handful let you connect via Ethernet to share the printer across a local network.

Some printers support storing 3D files on an SD or microSD card (which may also contain the printer’s system files). Most 3D printer manufacturers (even the discount ones) have a mobile app to launch and monitor print jobs, and a few provide access to cloud services from which you can print.

While high-end 3D printers tend to have an abundance of connection choices, discount models vary widely in their choices. Some are generous and some are basic, so it pays to assess what a given model offers.

What Should I Look for in Filament Support?

Filament support tends to be a key area that separates the cheaper models from the higher-end ones. (See our guide to understanding 3D printing filaments for more particulars.) Inexpensive 3D printers tend to support a limited number of plastic filament types, some of them only PLA and/or ABS.

Recommended by Our Editors

3D Printing: What You Need to Know

3D Printer Filaments Explained

(Credit: Molly Flores)

PLA (polylactic acid) is a biodegradable, plant-based polymer, while ABS (acrylonitrile butadiene styrene) is the same tough plastic that Legos are made from. Objects printed from ABS are durable and nontoxic, though the material can be tricky to work with. ABS can emit an acrid, unpleasant odor during printing, and the bottom corners of objects being printed with it have a tendency to curl upward a bit, especially if you are using a non-heated print bed. This can lead to unsightly prints, and/or prints prematurely pulling off the build plate, ruining them.

Many entry-level and low-price 3D printers stick exclusively to PLA. If you want to experiment with a larger variety of filaments—which include water-soluble filament, wood- and metal-laced composites, and both tough and flexible varieties—you may have to pay more, although a few discount models support a wide range of materials.

Should I Consider a 3D Printing Pen Instead?

Although they aren’t printers per se, inexpensive 3D pens are close kin to 3D printers—using the same filament types and a similar extrusion system—and we include them in the 3D printing category. Rather than tracing out a programmed pattern, you use the 3D pen much like a normal pen, except that you draw with molten plastic. You can trace a pattern or draw freehand, and even draw in three dimensions as the plastic quickly solidifies and hardens once extruded.

(Credit: 3Doodler)

Most 3D pens cost less than $100, and some cost $50 or less. At a glance, 3D pens may appear to be toys, but some artists and craftspeople have taken to them, as it is possible to make quite complicated and beautiful objects with them. If your aim in 3D printing is something closer to freehand design and free expression than computer-centric, structured, and repeatable output, you might give one a try.

So, What Is the Best Cheap 3D Printer to Buy?

Buying a budget 3D printer needn’t mean a world of sacrifice. Plenty of capable and reliable models sell at less than $500, and while they may not be as feature-rich as their more expensive cousins, there's no sense in paying for things you don’t need.

Many casual 3D-printing experimenters will be fine with printing over a USB cable or from a thumb drive, and sticking to PLA may be the best choice for a starter 3D printer. If you focus just on the features you want, you may be pleasantly surprised at what you find. Below, check out a spec breakdown of the best under-$500 3D printers we have reviewed, paralleling our picks above. Also, for a look at the broader market, see our guide to our favorite 3D printers overall.

5 Best Cheap 3D Printers in 2023

3D printing machines used to require deep pockets and big shops. That’s no longer the case. With far more demand and more potential uses, the range of 3D printers has exploded to include many low-budget options. Currently, the best budget 3D printers for starters are: Comgrow Creality Ender 3 Pro, Anycubic Photon Mono X, and Monoprice Voxel Wi-Fi. These have proven to be reliable and considerably more affordable than others. This article will discuss them and a few others among the best cheap 3D printers for 2023. It will also give you some background info about the costs and reasons why the printers on this list are the most practical.

1. Comgrow Creality Ender 3 Pro 3D Printer

The Comgrow Ender 3 Pro is a fused deposition modeling (FDM) 3D printer. It is based on the older Ender 3 model but comes with extra functions. It can be bought for as low as $200-250 which makes it one of the cheapest printers out there. The Ender 3 Pro 3D printer features include:

  1. A more sturdy 40x40 mm aluminum extrusion for a more stable y-axis base.  
  2. Touch screen system that enables easy control. 
  3. A large printing volume measuring 220 x 220 x 250 mm.
  4. A C-MAG magnetic printing bed that simplifies the removal of finished parts from the build surface. This printing bed reaches a max temperature of 110°C.
  5. A resume printing feature that allows the device to resume printing even after a power outage.

Not only is it affordable, but the Ender 3 Pro 3D printer can produce high-quality prints, has a compact design with a decent build volume, and has a tighter filament pathway that makes working with flexible filaments easier. It does have drawbacks, however, especially when working with ABS. The material tends to warp due to uneven temperature distribution. Plus, ABS usually needs extra adhesive to stick to the print bed, and the Ender 3 Pro’s bed itself can’t even be locked into place on its own. This is not a dealbreaker for everyone but should be considered if you plan to use ABS.  

2. Comgrow Creality Ender 3 3D Printer

The Comgrow Creality Ender 3 was the first FDM 3D printer in the Ender 3 series, preceding the Creality Ender 3 Pro. It measures 440 x 440 x 465 mm and weighs 8 kg, but is cheaper than most printers of similar dimensions. At a price of $150-200, it is one of the most budget-friendly printers. 

The Ender 3 3D printer can be used with TPU, ABS, and PETG filaments. It is also built with SD and USB ports for connectivity. The Ender 3 resume printing capacity allows continuous printing even if there’s a power outage. To top it off, this machine has a good quality extruder, a BuildTak-like heated build plate, and a print volume of 220 x 220 x 250 mm. 

Aside from being affordable and easy to assemble, the Ender 3 3D printer employs a patented printing nozzle that prevents blockages and reduces cases of poor extrusion. It also prints relatively quietly, the software is open source, and its components are simple to upgrade. Nonetheless, it comes with the disadvantage that its bed requires a manual lock and is difficult to level. 

3. Anycubic Photon Mono X 3D Printer

The Anycubic Photon Mono X 3D model LCD printer is another of the best cheap 3D printers that cost between $400 and $450. This device is well designed for quick and efficient prints. It builds parts by curing liquid resin, using an 8.9-inch LCD mask to project each layer’s image. The Photon Mono X can print parts up to 192 x 120 x 245 mm in volume at a max resolution of 0.01 mm on the Z axis and 0.05 on the X and Y axes. The LCD projection system helps it print as much as 60 mm of model height per hour no matter how complex each layer is. 

This 3D printer works well for printing miniatures and artwork and it comes with a user-friendly interface. However, finished prints are difficult to remove from the print bed and the machine possesses no power backup to account for outages.

4. Monoprice Voxel Wi-Fi 3D Printer

The Monoprice Voxel 3D printer competes well with the best 3D printers below $500. It is a fused filament fabrication (FFF) machine sold for between $350 and $400. Its features include: a heated printing bed for better ABS adhesion, adjustable bed plates, a filament sensor to determine when the material is running out, an inbuilt webcam, and the Polar Cloud software. Polar Cloud allows remote access so you can control the machine from anywhere.

The Monoprice Voxel printer is known for its ease of use and the reasonably high-quality 3D images it produces. Its disadvantages, on the other hand, are WiFi connection issues, lackluster software, and frequent misprints.

5. Comgrow Creality Ender 3 V2 3D Printer

Another of the best cheap 3D printers is the Comgrow Creality Ender 3 V2 FDM printer, a direct successor to the Ender 3 Pro. Its print size is the same as older versions of the Ender 3 (220 x 220 x 250 mm) and it costs around $250-300. This 3D printer has an overall size of 475 x 470 x 620 mm. It is designed for 1.75 mm filament and reportedly achieves layer resolutions of 0.1-0.4 mm. This 3D printer can accept PLA, ABS, PETG, and TPU filaments. The Ender 3 V2 is also lauded for being relatively quiet and running a user-friendly interface. Plus, it has both an X- and Y-axis belt tensioner and a resume print function to guard against power outages. Some of its disadvantages, however, are its poor filament loading, a print bed that must be manually leveled, and an advanced setup process that may not suit beginners.

What is a 3D Printer?

A 3D printer is a machine that produces a physical version of a digital 3D model by building it up bit by bit. This is normally done by stacking many two-dimensional “slices” of the computer model atop one another until they form the full 3D object. Because 3D printing starts with nothing and adds material to create the part (rather than subtracting from a larger piece of raw material), it is known as additive manufacturing. Each object to be printed must first be built digitally in a CAD program, run through slicing software, and sent to the printer’s computer.

What to Look for in a Low-Cost 3D Printer? 

The following items should be considered when looking for a low-cost 3D printer:

  1. Printing image quality
  2. Materials to use (for example, if ABS filaments will be used, find a 3D printer whose bed can be heated enough that ABS will adhere to it).
  3. Layer resolution
  4. Printing speed
  5. Print volume
  6. Price 

Why Purchase a Low-Cost 3D Printer?

Listed below are some reasons to opt for a low-cost 3D printer:

  • It is more practical, especially for starters, hobbyists, and home users.
  • You’re creating parts using cheap materials (for example ABS filaments).
  • You only need to produce small parts that will fit within the machine’s print volume.

Where to Buy Cheap 3D Printers?

Cheap 3D printers can be purchased from reliable e-commerce websites such as: Amazon, BestBuy, and Alibaba.

How Much Should I Spend on a 3D Printer?

3D printers run the gamut from a few hundred dollars to a few hundred thousand. Those with price tags of between $250 and $500 are considered cheap 3D printers. What you decide to spend on a printer depends heavily on your budget, your needs, and the parts you intend to produce. 

Is It Less Expensive to Buy or Build a 3D Printer?

Purely in terms of materials, it is cheaper to create your own 3D printer. And if you intend to print as a hobby, the construction and testing of a homebuilt printer can be a hobby project in and of itself. However, the process is time-consuming and non-trivial. If instead, you intend to print as a business venture, premade printers or kits will be cheaper once work hours are factored in. 

What Are the Differences Between Low-Cost and High-Cost 3D Printers?

Many differences between low-cost and high-cost 3D printers are easy to predict. Expensive printers generally print higher-resolution, higher quality, and more functional parts. However, the machines are often larger and more expensive not only to buy but to maintain and operate. Additionally, some print materials are far more pricey than the simple offerings like ABS and PETG that even the best cheap 3D printers are limited to. 

Summary

This article presented the best cheap 3D printers, explained what they are, and discussed the features of each printer. To learn more about 3D printers, contact a Xometry representative.

Xometry provides a wide range of manufacturing capabilities, including 3D printing and other value-added services for all of your prototyping and production needs. Visit our website to learn more or to request a free, no-obligation quote.

Disclaimer

The content appearing on this webpage is for informational purposes only. Xometry makes no representation or warranty of any kind, be it expressed or implied, as to the accuracy, completeness, or validity of the information. Any performance parameters, geometric tolerances, specific design features, quality and types of materials, or processes should not be inferred to represent what will be delivered by third-party suppliers or manufacturers through Xometry’s network. Buyers seeking quotes for parts are responsible for defining the specific requirements for those parts. Please refer to our terms and conditions for more information.

Team Xometry

This article was written by various Xometry contributors. Xometry is a leading resource on manufacturing with CNC machining, sheet metal fabrication, 3D printing, injection molding, urethane casting, and more.

Top 10 Best 3D Printers - Ranking 2023

At the time of the introduction of the first 3D printers, such equipment could only be treated as a luxury item. Today they are so affordable that many people buy them for entertainment and creativity. Nevertheless, if you decide to print even a simple and small craft at home, you need to have certain knowledge in order to purchase a quality product that can cope with such a seemingly simple task at the proper level. In our ranking of the best 3D printers of 2023, we will consider both high-quality models and important issues that allow you to implement the task yourself.

Roughly speaking, such products can be divided into two categories, which include amateur and professional solutions: created model. The same units may have the abbreviation FDM or FFF.

  • SLA printers - these solutions are based on resin and laser, the combination of which allows the realization of very precise and thin details.

    • Colored ABS or PLA plastic can be used for home printing. Some experts argue that the first option is more designed for professional printing, and the second for beginners. In our opinion, this is an erroneous judgment, since much depends on the class and technology, and not consumables, although there are still fundamental differences.

    Rating

    Best 3D Printers (FDM/FFF)

    This category contains plastic guiding 3D printers. Such inventions work on the basis of classical technology: special types of plastic are fed into an extruder, where it is melted and then exits through a nozzle. If necessary, the lines can be superimposed laterally, reaching the optimal area for creating certain elements.

    Artillery Hornet

    Opens the top 10 good 3D printers for the Artillery Hornet series, which is made of aluminum profile. At the heart of this functional invention is a 32-bit motherboard. The press is carried out at the expense of one extruder with Bowden supply of material. You can use a memory card and be guided by a convenient screen, which allows you to automate the operation of equipment. This device is delivered already actually assembled, no difficulties in this regard should arise. According to the reviews, it is clear that quiet drivers are used, which significantly reduce the noise level of the invention. The advantages include a good PSU, the power of which reaches 350V. The base of the equipment heats up to 80 degrees in just 3 minutes. Of the useful options, we can only highlight the resumption of printing, which allows you to continue the work process from where you left off.

    Pros:

    • heating up to 240⁰С;
    • good power supply;
    • aluminum profile;
    • have screen;
    • software.

    Cons:

    • few options.

    Creality Ender 3

    The list of budget 3D printers is replenished with another reliable and powerful model of the Creality Ender 3 series, which attracts with balanced technical characteristics. The consumable material can be one of several options, including ABS, HIPS, and PLA. Accordingly, the temperature range guarantees a very wide range of applications. The device has a modest size and a good printing nozzle, the diameter of which reaches 0.4 millimeters. In terms of print speed, there is nothing to complain about here either, since the specified parameter can vary in the range from 40 to 120 millimeters per second. Layouts can be loaded using a memory card, as well as USB for connecting portable equipment or a PC.

    Pros:

    • optimal speed;
    • miscellaneous materials;
    • easy operation;
    • is a good nozzle.

    Cons:

    • minimum of functions.

    Gembird 3DP-GEMMA

    Continuing the discussion of good 3D printers for printing with PLA, I would like to highlight the model of the Gembird 3DP-GEMMA series, which works based on FDM or FFF technology. Several file formats can be downloaded, including obj as well as gcode for working with models. It should be noted that the volume of this unit reaches 1.2 liters, but the engineers managed to take care of the compact dimensions of the equipment. It should be noted that the software is supported by WiiBuilder and Cura. It is extremely difficult to imagine a more convenient amateur solution. In particular, this is due to the support of a 3.5-inch display based on LCD technology. The print speed, unfortunately, is not too high and reaches a maximum of around 40 millimeters per second.

    Pros:

    • small size;
    • very handy technique;
    • handy screen;
    • two utilities;
    • print quality.

    Cons:

    • low speed.

    XYZprinting da Vinci 1.0 Pro

    If you need a powerful FDM printer, you should probably look into the XYZprinting da Vinci 1.0 Pro line. This device has a powerful metal construction, durable drive and stylish design. The powerful unit includes a high-quality scanner, and supports the installation of another laser engraving module. A variety of plastic filaments can be used for printing, including ABS and PLA with diameters up to 1.75 millimeters. The 3-in-1 3D printer has a fairly well-designed base that can rotate 360 ​​degrees. The visualization, according to the brand, takes about 5 minutes. Scanner data can be changed without special skills. It should also be noted the modernized calibration system, which greatly simplifies the operation of equipment. In addition, there is the XYZware Pro program, with which it is easy to change the temperature, speed, and other settings for operating parameters.

    Pros:

    • range of plastic consumables;
    • good software;
    • calibration accuracy;
    • base security;
    • manufacturer experience.

    Cons:

    • no.

    Flashforge Adventurer 3

    The Best Consumer 3D Printer of 2023 is the Flashforge Adventurer 3 series model, which quickly gained popularity after being presented at the China Education Technology Exhibition. Sufficiently powerful machine attracts with intuitive controls and ergonomic body. Pleases and a good set of useful features, including a removable nozzle, as well as a platform with support for heating. Moreover, the engineers of the well-known brand took care of the support of cloud printing, which justifies the possibility of remote control of the equipment. The nozzle diameter reaches 0.4 millimeters at a print speed of 10 to 100 millimeters per second. As you understand, the standard thread diameter is 1.75 millimeters. It should be noted bright touch screen.

    Pros:

    • cloud printing;
    • easy operation;
    • good speed;
    • many adjustments;
    • nozzle diameter.

    Cons:

    • not found.

    Top 3D Printers (SLA)

    This type of 3D printer uses photopolymer resins that harden when exposed to light. Its source in this case is a special laser.

    Creality Halot-One Pro

    The rating of 3D printers is replenished by a photopolymer unit of a well-known brand, which is considered one of the market leaders. Immediately, we note that the developer of technology paid a lot of attention to the software. This affects the quick calibration of the product. Ease of use is evidenced by many user reviews. The Creality Halot-One Pro impresses with its compact size and improved light source. Management is carried out by proprietary software from a smartphone via Wi-Fi. Moreover, a very useful option is to manage printing using the Creality Cloud cloud storage. There is no doubt about the reliability of the printer, since “high-quality hardware” and a dual cooling system are implemented. The developers also took care of the presence of 6 UV lamps and convenient touch controls.

    Pros:

    • print resolution;
    • ARMCortex-M4 processor;
    • known software;
    • simple setting;
    • unpretentiousness to materials.

    Cons:

    • noisy model.

    Phrozen Sonic Mini 4K

    The Phrozen Sonic Mini 4K series model adds to the list of convenient 3D printers, the main advantage of which is high detail at the level of 722 PPI. The print area in this case can be in the region of 6.1 inches. According to customer reviews, you can understand that the device works very quickly, you can make a small ball in a few seconds. The device performs tasks four times faster than most analogues. To use it, it is enough to use a storage medium (USB) with preloaded models. The case is made very high quality, compact size and light weight of the invention please. We also add that the 3D printer of this series can work with resins from different manufacturers.

    Pros:

    • high speed;
    • easy operation;
    • printing area;
    • good assembly.

    Cons:

    • is not the most famous brand.

    Elegoo Mars 2 Pro

    The list of good 3D printers for home use adds to the Elegoo Mars 2 Pro series, equipped with a monochrome display and a matrix with directional UV radiation. This line operates on the basis of the CHITUBOX system. This is a convenient software that even a novice user can handle. The wavelength is 405 nm, which is a good indicator. It is worth noting the good resolution and the upgraded Z-axis mechanics. For a hobby, this is definitely a good solution, but the speed is not ideal, although it was tripled compared to its predecessor. We add that the manufacturer paid due attention to the quality of the design and the low weight of the invention.

    Pros:

    • convenient software;
    • wavelength;
    • Z-axis mechanics;
    • improved assembly.

    Cons:

    • not the highest speed.

    Anycubic Photon Mono 4K

    If you haven't decided on a good 3D printer for home use, we recommend that you pay attention to the Anycubic Photon Mono 4K series. This is a modernized version of a fairly popular line, which received an even more durable closed case. In addition to the low noise level, this design attracts with a minimum volume of unpleasant odors. The main advantage of this series is the high speed of printing, as well as 4K resolution, which is the reason for the high accuracy of work. The productivity is 50 millimeters per hour. It is important that the light transmission was increased by another 7 percent, which also has a positive effect on the speed of implementing the tasks. The design includes a relatively inexpensive monochrome screen, which is reasonable to save on. But, an even more expensive version with quartz lenses was used as a matrix, which has a positive effect on the dispersion of UV rays.

    Pros:

    • high speed;
    • good module;
    • build quality;
    • low noise level;
    • simple operation.

    Cons:

    • not found.

    XYZprinting Nobel 1.0

    The best consumer 3D printer of 2023 is the high resolution XYZprinting Nobel 1.0 series model for this class. The experts have taken care of a good laser scanning system, which is also due to the use of good software. Among other things, it is necessary to note the high quality of the design. The company's engineers took care of the possibility of automatically determining the required volume of polymer in the tank. Further, the stock is replenished offline, respectively, the role of the user is minimized. The device has an NFC chip.

    Pros:

    • NFC chip;
    • good software;
    • laser system;
    • good performance;
    • layer resolution.

    Cons:

    • no.

    How to choose a good 3D printer?

    To decide on a purchase, you first need to answer several questions for yourself, ranging from how much money you are willing to spend to what goals you are pursuing. If you don’t know how to choose a 3D printer, also keep in mind that modern models can use different types of materials for work:

    • plastic;
    • stainless steel;
    • wood;
    • resin;
    • nylon.

    As you understand, complex materials cannot be used in amateur models, they are designed for professionals, and a lot depends on the size of the coil, thread diameter, software and other aspects. We do not consider such models, since the experts themselves perfectly understand the features of different units. We are interested in the amateur segment, where the paramount parameters are such characteristics as:

    1. Print speed - depends on how quickly the nozzle dispenses filaments of plastic, the melting of which, in turn, depends on temperature and heat. It is important to note that high-speed budget models often reach this parameter at the expense of quality;
    2. Layer resolution - the higher the value, the thinner the lines will be. This should be strived for, because you can create the best possible relief;
    3. Print area - this parameter determines how three-dimensional the finished figure can be. Most often, this characteristic is indicated by the manufacturer in cubic centimeters.

    As already mentioned, a lot depends not only on the technical characteristics, but also on the software. Modern devices support Wi-Fi and special utilities for modeling objects. The more convenient the software, the easier it is to fulfill your goals.

    What is the best 3D printer to buy in 2023?

    Today, many online stores in Ukraine already have this type of electronics in their warehouses. If you do not know which 3D printer to buy, we suggest you once again pay attention to the following product lines:

    1. Best Inexpensive 3D Printer - Artillery Hornet;
    2. Good amateur 3D printer - Flashforge Adventurer 3;
    3. Comfortable model for home - Elegoo Mars 2 Pro;
    4. Best Premium 3D Printer - XYZprinting Nobel 1.0.

    Obviously, professional models are in a completely different price category, but we did not consider solutions for industrial scale, because this is a different segment of goods. In addition, the experts themselves are excellently versed in the characteristics that must be taken into account, first of all.

    TOP 15 best models in terms of quality and reliability

    A 3D printer is a device used for 3D printing. In this article, we will tell you how to simplify the search for the necessary 3D printer model among the variety on the market. We analyzed the options available in online stores, studied their functionality, got acquainted with the technical characteristics and user reviews. Here we present the ranking of the best 3D printers for 2022-2023. They are grouped by the most popular request categories.

    Rating of the best 3D printers for 2022-2023

    Place Designation Price Description
    Best 3D printers by price/quality for 2022-2023
    1 Wanhao D12/500 Get the best price User Choice Best Price/Quality 2022-2023
    2 Creality 3DPrintMill CR-30 Get the best price High quality 3D printer using conveyor printing method
    3 Phrosen Schuffle XL Lite Get the best price Stable and easy to use large format 3D printer
    Best Kids Educational 3D Printer
    1 Creality Ender 7 Get the best price Best Kids Educational 3D Printer
    2 Anycubic Vyper Get the best price Excellent value for money 3D printer with new board and high performance control chip
    3 Flying Bear Aone Get the best price Budget model of children's educational 3D printer
    Top 9 industrial 3D printers0333
    1 Anycubic Photon Mono X Get the best price Experts voted the best industrial printer to date
    2 Phrozen Sonic Mighty 4K Get the best price Rugged 3D printer for industrial projects
    3 CF Chef Get the best price A new chocolate 3D printer that is suitable for creating various types of chocolate figurines
    Top Resin 3D Printers
    1 Creality HALOT ONE PLUS Get the best price Best Large Area Resin 3D Printer Chosen by Users Today
    2 Phrozen Sonic 4K 2022 Get the best price Good photoresin 3D printer often used in dentistry and dental laboratories
    The best 3D printers for home
    1 Creality Ender 3 Pro Get the best price Best 3D printer for home projects
    2 Flash Forge Adventurer 3 Get the best price Reliable and high quality 3D printer for various home projects
    Best Inexpensive 3D Printers
    1 Creality Ender 3 Get the best price Best budget 3D printer available as a do-it-yourself device
    2 Anycubic Mega-S Get the best price Inexpensive 3D printer with excellent functionality

    Contents

    • Best 3D Printer Rankings 2022-2023
    • How to choose a 3D printer?
    • Best 3D printers for price/quality on 2022-2023 year
      • 1. Wanhao D12/500
      • 2. Crely 3dprintmill CR-30
      • 3. PhROSEN Schuffle XL Lite
      9000
    • Best 3D Printers
      • 1. Crealy Ender 7
      • 2. Anycubic Vyper
      • 3. FlyingBear Aone
    • Best Industrial 3D Printers
      • 1. Anycubic Photon Mono X
      • 2. Phrozen Sonic 4k
      • 3. CF Chef
    • The best photopolymer 3D printers
      • 1. Crealy Halot ONE Plus
      • 2. Phrozen Sonic 4 K 2022
      • Best 3D Printers for Home
        • 1. Crealy Ender 3 Pro 9000
      • Best cheap 3D printers
        • 1. Creality Ender 3
        • 2. Anycubic Mega-S
      • Which brand to choose?
      • Useful video

      How to choose a 3D printer?

      When looking for the model you need, pay attention to the following parameters:

      • technology and print volume;

      If you are going to produce high precision and small parts, SLA or DLP is the way to go. If the range of tasks is wider and low manufacturing cost is important, then your choice is an FDM printer.

      • workspace size;

      Many 3D printers have a working space of 200x200x200mm. This is enough for most tasks. However, you may need a smaller size, or vice versa, you will need a larger one, it depends on your needs.

      • printing precision;

      Nozzle size affects print accuracy. Not only smooth layers depend on it, but also the detailing of the model. A smaller nozzle diameter gives more detail, but slower production speed. Many printers have the ability to change the nozzle for a specific task.

      • platform heating;

      The presence of this function ensures better adhesion of the first layer. Engineering plastics, for example, cannot be used without heating the table, since the figures can warp.

      • camera type;

      Can be open or closed. The latter options are usually presented on more expensive and advanced models.

      • number of extruders;

      When printing complex elements, you will need a model with two materials and corresponding extruders in order to be able to print supports from soluble material. Models with a large number of angles greater than 30 degrees or a large number of hanging elements are called complex. If the models are not too complex, one extruder will suffice, which will greatly help save the budget.

      • print speed;

      The parameter implies the maximum head movement speed. A 14x4x10 tablet stand will print approximately 6-6.5 hours at 100mm/sec.

      • functionality;

      Printers can support wireless communication with various devices: phones, tablets, etc., as well as memory devices. Plus, as a rule, printers are already equipped with software when they are sold. Pay attention to the compatibility of the OS with the OS of the computer.

      Best Price/Quality 3D Printer 2022-2023

      1. Wanhao D12/500

      Wanhao D12/500 is the best price/quality 3D printer for 2022-2023 as voted by users. A 3D printer that is great for mass production. The optimal size of its zone makes it possible to print a large model in one cycle. The control system here is intuitive and clear, the user can easily calibrate the printer to fit his needs.

      The Wi-Fi connection helps you connect to your PC or laptop. Extruders will allow you to print using supports. The color display with touch keys will be an excellent assistant in setting up the device.

      Designed with a heavy duty frame and adjustable straps. The working surface is automatically heated to achieve adhesion to the first layers of plastic. The switch is equipped with 2 fuses for emergency protection.

      Specifications:

      • Print technology: FDM/FFF/PJP
      • working space dimensions: 500x500x500 mm;
      • print speed (extruder speed): 150mm/s;
      • number of extruders: 2;

      Advantages:

      • 2 extruders;
      • high speed printing;
      • workspace size;

      Drawbacks:

      • cost;

      2.

      Creality 3DPrintMill CR-30

      The Creality 3DPrintMill CR-30 is a quality 3D printer using a conveyor printing method, which is perfect for small and medium businesses with the ability to organize mass production. Instead of a platform, there is a nylon-based transport tape with excellent adhesive properties.

      The design allows printing of long products of non-standard dimensions. Three powerful fans provide excellent airflow. Management is carried out using a convenient display, which is located on the right side of the case. There is an SD slot for downloading files offline.

      End of filament sensor will stop the device if the filament breaks. In the event of a power failure, auto-update will help restore functionality. The maximum extruder temperature is 240 degrees.

      Specifications:

      • Print technology: FDM/FFF/PJP;
      • working space dimensions: 200x170 mm;

      Advantages:

      • wireless connection;
      • the ability to adjust the temperature and speed;
      • is suitable for small and medium businesses;

      Disadvantages:

      • noisy;

      3.

      Phrosen Schuffle XL Lite

      The Phrosen Schuffle XL Lite is a stable and easy to use large format 3D printer. It makes it possible to print both large models as a whole, and many small ones at once. The new matrix shows excellent print accuracy. The software is included in the kit, so it is quite easy to manage the device.

      The printer is suitable for dentistry, jewelry and prototyping as it prints reliably with high precision. The double linear guide guarantees long-term operation without interruption.

      Operation is simplified by the large and bright display with an easy-to-use touch panel. The device can be used not only by professionals, but also by amateurs. Z-axis of the printer is stable, has zero fluctuations during printing.

      Specifications:

      • print technology: DLP, LCD;
      • print material: photopolymer;

      Advantages:

      • acceptable cost;
      • high precision printing;
      • stable Z-axis;

      Disadvantages:

      • sometimes there are some difficulties when changing already programmed material;

      Best Kids Educational 3D Printer

      1.

      Creality Ender 7

      The Creality Ender 7 is the ultimate children's educational 3D printer and one of the fastest in the mainstream segment. Its speed is its main trump card, but you need to remember that it is impossible to work with some types of thermoplastic at high speed. In general, not very high-precision details are printed quickly.

      Operation is carried out using a convenient display, which is located in the central part of the housing. For downloading files offline, there is an SD slot and a USB connector. The maximum extruder temperature is 260 degrees.

      The print platform is heated to 100 degrees. The nozzle has one of the most popular diameters of 0.4 mm. The printer is also equipped with a filament control sensor, and calibration is automatic.

      Specifications:

      • Print technology: FDM/FFF/PJP;
      • working space dimensions: 250x250x300 mm;
      • print speed (extruder speed): 250mm/s;

      Advantages:

      • reasonable cost;
      • high speed printing;
      • large working space;

      Flaws:

      • small printable area;

      2.

      Anycubic Vyper

      The Anycubic Vyper is a great value 3D printer with a brand new board and high performance Cortex M3 control chip. It features good speed and smooth operation. It prints not only accurately, but also silently. The platform has a high-strength coating that provides easy removal of the finished model.

      The blower system consists of a pair of fans that will allow you to quickly cool the models. Management is carried out using a large touch screen. It features a new interface, simple and smooth operation, and the ability to switch languages ​​to English and Chinese.

      The electronic system automatically calibrates the platform with sixteen points. The dimensions of the device are compact, and the working space is large. Printing is recommended at a speed of 80-100 mm/sec.

      Specifications:

      • Print technology: FDM, FFF, PJP;
      • working space dimensions: 245x260x245 mm;
      • print speed (extruder speed): 100mm/s;

      Advantages:

      • quick and easy to assemble;
      • silent operation of the device;
      • convenient and clear control;

      Disadvantages:

      • not very convenient location of the coil;

      3.

      FlyingBear Aone

      The FlyingBear Aone is a low cost educational 3D printer for kids in a compact size suitable for home projects. It comes as a self-assembly kit. Its case is open, like many inexpensive models. The printing table is heated from 60 to 100 degrees Celsius.

      Print speed up to 100 mm/sec. Management takes place using a special color touch screen, which is located at the bottom of the printer.

      The USB port can be used to connect to a PC or laptop, while the SD slot is suitable for stand-alone operation. The power supply is installed in the bottom of the case and is built-in. The extruder is equipped with a nozzle with a diameter of 0.4 mm.

      Specifications:

      • Print technology: FDM, FFF, PJP;
      • working space dimensions: 190x190x190 mm;
      • print speed (extruder speed): 100mm/s;

      Advantages:

      • fast and clear assembly;
      • inexpensive 3D printer;
      • is easy to use for beginners;

      Disadvantages:

      • very noisy fans;

      Best industrial 3D printers

      1.

      Anycubic Photon Mono X

      The Anycubic Photon Mono X is the best industrial printer according to experts today. It has the largest printable area among resin printers. It features good speed and smooth operation. It prints not only accurately, but also silently. The platform has a high-strength coating that provides easy removal of the finished model.

      Controlled by large touch screen. It features a new interface, simple and smooth operation. The dimensions of the device are compact, and the working space is large.

      Printing recommended at 80-100 mm/sec. The printer is equipped with a wireless Wi-Fi connection to connect to the Internet, to a computer or laptop. The matrix light source consists of UV LEDs. This improves accuracy and reduces exposure time.

      Specifications:

      • Print technology: LCD, SLA;
      • working space size: 120x245x192 mm;

      Advantages:

      • high detail;
      • large height and print area;
      • comfortable and bright screen;

      Disadvantages:

      • high cost of spare parts;

      2.

      Phrozen Sonic Mighty 4K

      The Phrozen Sonic Mighty 4K is a robust 3D printer for industrial projects with a large build area and high print speed. It is an excellent choice for both creative and professional use. The new matrix shows excellent print accuracy.

      The software is included, so the device is easy to operate. The printer is suitable for dentistry, jewelry work and prototyping, as it has a reliable print with high accuracy.

      Double linear guide ensures long, trouble-free operation. Operation is simplified by the presence of a large and bright display with a convenient touch panel. The device can be used not only by professionals, but also by amateurs. Z-axis of the printer is stable, has zero fluctuations during printing.

      Specifications:

      • Print technology: DLP/LCD/SLA;
      • working space dimensions: 200x220x125 mm;
      • printing speed (layer building): 80 mm/h;

      Advantages:

      • quiet operation;
      • fast printing;
      • compact dimensions of the device;

      Disadvantages:

      • high cost;

      3.

      CF Chef

      CF Chef is a new chocolate 3D printer that is suitable for making various kinds of chocolate figurines. It can be used to create openwork chocolate toppers for confectionery, print corporate chocolate gifts, make text messages and logos, and print chocolate figures.

      The dimensions of the printer are 300x300x380 mm, so it can be placed in any room, but the working area is quite large. The printing time of chocolate models depends on their complexity. The printer allows you to create 2D, 2.5D and 3D products. You can use a USB cable or a wireless WI-FI connection to connect to a computer. The printing speed can reach 100mm/s.

      Specifications:

      • print material: tempered chocolate and chocolate glaze;
      • print speed: 100 mm/s;

      Advantages:

      • the ability to connect to a computer or laptop;
      • good print speed;
      • is suitable for the food industry;

      Disadvantages:

      • cost;

      Top 9 Resin 3D Printers0017

      1.

      Creality HALOT ONE PLUS

      Creality HALOT ONE PLUS is the best large area photoresin 3D printer according to users today. It can be used for both business and home projects. The device is controlled using a convenient display, which is located in the central part of the case.

      Wi-Fi port and USB port for uploading files and updating firmware. The nozzle has one of the most popular diameters of 0.4 mm. The printer is also equipped with a filament control sensor, and calibration is automatic.

      UV source for improved detail and print quality. Windows and Mac OS are compatible with the printer. Quad-core ARM Cortex M4 processor provides high power and performance, as well as stable operation.

      Specifications:

      • Print technology: LCD;
      • working space dimensions: 102x160x172 mm;

      Advantages:

      • low cost;
      • the presence of a USB connector;
      • UV source;

      Drawbacks:

      • 1 extruder;

      2.

      Phrozen Sonic 4K 2022

      Phrozen Sonic 4K 2022 is a good photopolymer 3D printer that is often used in dentistry and dental laboratories. The new matrix shows excellent print accuracy. The software is included in the kit, so it is quite easy to manage the device.

      The printer is suitable for dentistry, jewelry and prototyping as it prints reliably with high precision. The double linear guide guarantees long-term operation without interruption.

      Operation is simplified by the large and bright display with an easy-to-use touch panel. The device can be used not only by professionals, but also by amateurs. Z-axis of the printer is stable, has zero fluctuations during printing. In the event of an unexpected power outage, operation can be resumed from the point at which it was stopped.

      Specifications:

      • Print technology: DLP, LCD;
      • working space size: 134x200x75 mm;

      Advantages:

      • improved accuracy;
      • excellent performance;
      • availability of various interfaces;

      Disadvantages:

      • very high cost;

      Best 3D printers for home

      1.

      Creality Ender 3 Pro

      The Creality Ender 3 Pro is the ultimate 3D printer for home projects. It is quick to assemble, easy to understand and set up and ensures stable operation. Both an experienced user and a beginner can handle it.

      Operation is carried out using a convenient display, which is located in the central part of the housing. For downloading files offline, there is an SD slot and a USB connector. The nozzle has one of the most popular diameters of 0.4 mm.

      The printer is also equipped with a filament control sensor and calibration is automatic. The device can be used both as a main and as an additional to professional equipment. Branded power supply makes the device more stable. The camera of the printer is open, like many inexpensive models.

      Specifications:

      • Print technology: FDM, FFF, PJP;
      • working space dimensions: 220x250x220 mm;
      • print speed (extruder speed): 180mm/s;

      Pros:

      • great for beginners thanks to clear assembly;
      • simple and inexpensive repair;
      • inexpensive model;

      Disadvantages:

      • noisy model;

      2.

      FlashForge Adventurer 3

      FlashForge Adventurer 3 is a reliable and high quality 3D printer for various home projects. With its use, you can print pre-prepared files. The device has a closed chamber. The supply end sensor will tell you when to add it. The printer will automatically stop when the media runs out.

      The nozzle has a typical diameter of 0.4 mm. It is made of stainless steel, which perfectly resists mechanical stress and quickly warms up during operation. LAN, USB and WI-FI interfaces allow you to connect to a computer or laptop. The printer is compatible with all major operating systems: Windows, Linux, MAC, which will be a big plus. The main working program FlashPrint will provide professionals and hobbyists with all the basic functions to work with.

      Specifications:

      • printing technology: FDM, FFF, PJP;
      • working space size: 150x150x150 mm;
      • print speed (extruder speed): 100mm/s;

      Advantages:

      • convenient and clear slicer;
      • works silently;
      • flexible removable platform;

      Disadvantages:

      • expensive to repair;

      Best Inexpensive 3D Printers

      1.

      Creality Ender 3

      The Creality Ender 3 is the ultimate budget 3D printer that comes as a DIY kit. The device is controlled using a convenient display, which is located in the central part of the case. For downloading files offline, there is an SD slot and a USB connector.

      One of the most popular nozzle diameters is 0.4 mm. Mechanical and electronic parts of the device are separated from each other. The device can be used both as a main and as an additional to professional equipment.

      Proprietary power supply makes the device more stable. The camera of the printer is open, like many inexpensive models. The workspace allows you to manage most projects. Even a beginner can handle this device.

      Specifications:

      • Print technology: FDM, FFF, PJP;
      • working space dimensions: 220x250x220 mm;
      • print speed (extruder speed): 180mm/s;

      Pros:

      • platform area is great for most tasks;
      • simple and clear assembly;
      • budget model;

      Disadvantages:

      • slightly skewed in the Z-axis due to design features;

      2.

      Learn more