Best 3d printing accessories

Top 15 Must-Have 3D Printer Accessories and Tools

3D printing industry has seen an accelerated growth in development over the years. From the massive and quite expensive 3D printers in the past, the models available today are more compact, affordable and easy to use. However, successful 3D printing does not only depend on the 3D printer itself. There are a variety of 3D printer accessories that play an important role when it comes to the quality of the final product.

With the right accessories, you can turn your average 3D printer into an incredible machine and you can be more assured that your prints will come out exactly as desired.

From removing support material to improving bed plate adhesion, here is a list of the top 15 3D printer accessories that will help you get the most of your 3D printer.

Disclosure: There are affiliate links in this article. As an Amazon Associate I earn from qualifying purchases.

Filament Storage Container

Get it on Amazon / AliExpress / Banggood

One of the most important accessories a 3D printer owner must possess is an appropriate filament storage container.

Most of the 3D printer owners don’t pay attention to that, which can lead to so many problems like clogging, bad layer adhesion, breakage, etc. That’s why it is very important to safely store your filaments in a moisture free environment.

The first option is a filament box, which keeps your filament dry, dust-free, and also dispenses filament. It has temperature and humidity sensor, and you can also print directly from the box.

Vacuum Sealed Storage Containers

Get it on Amazon

Another great option are vacuum sealed storage containers. They come in a pack of 5, which is pretty awesome.

Masking Tape

Get it on Amazon / Banggood

Masking tape is one of the most widely used 3D printing accessories. It is used to help each print adhere better to the print bed and is highly recommended. Furthermore, the finished print is much easier to remove from the bed as well as protect it from scratches.

Make sure you choose masking tape with a width of at least 5 cm (2 inches). Having a wider tape means you’ll need fewer strips to cover your print bed, which will lead to better results.

Alternative: Kapton Tape

Get it on Amazon / Banggood

Although masking tape has been widely used for covering print beds and is cheaper option, Kapton tape is much better in the long term since it handles high temperatures better. This tape also prevents severe warping resulting in a much better 3D print. Kapton tape can be combined with other products, such as hairspray for best results.

PVA Glue Stick

Get it on Amazon / Banggood

When 3D printing, it’s vital to ensure good adhesion of your print to the build plate. So, another way to increase plate adhesion is covering your print bed with washable glue stick. You can apply glue directly to your build plate and wipe it off easily with water.

This is one of the best bed adhesion solutions and works well with most materials, except for those prone to very high warpage like ABS and polycarbonate.

It works pretty well and it can easily be found at a wide variety of stores and at a very reasonable price.

Alternative: Hair Spray

Get it on Amazon

Many people also recommend spraying the bed with hair spray. Using hairspray to add an extra layer of ‘stickiness’ to your print bed is a quick and easy process.

But you must be careful with this method because using hairspray regularly and without proper care can damage your printer.

3D Print Removal Tool

Get it on Amazon / Banggood

Sometimes you might find that your 3D print has stuck to your build plate. A 3D print removal tool, or spatula, can easily solve this problem. All you need to do is to put it gently underneath the print and carefully lift it up. You can also use this tool for scraping off little bits of filament.

You probably got a one with your 3D printer, but that’s just a generic spatula which sometimes doesn’t do the job.

This set of different spatulas ensures you always have the right tool for removing any object you print. These spatulas are as thin as a knife blade, but without the sharp edge. They’re also usually angled in such a way that you can hold the handle parallel to the bed. It will prevent you from scratching the tray or damaging the part. I consider this set as an essential 3D printer accessory.

Carving Tools

Get it on Amazon / Banggood

When printing parts with a lot of little details and supporting material, you need to do some extra work to get a good finished look. For finishing the 3D prints where a little work is required, this set of carving tools is perfect for smoothing out your final product by removing excess filament and bringing to perfection all the little details.

This set contains 12 different carving tools of varying shapes and sizes that will meet most of your needs.

Alternative: Diamond Needle File Set

Get it on Amazon / Banggood

Another tool perfect for working on small, delicate projects is a diamond needle file. This set includes 6 pieces with different shape and size, and each one serves a different purpose.

Pliers

Get it on Amazon / Banggood

Needle-nose pliers can allow you to get into the fiddly areas of your 3D printer and your prints while providing a good, strong grip. Always look for a good quality pair of pliers with a rubberized, slip-resistant grip.

They can be used to remove jams in your 3D printer, to cut filaments, or to install new filaments. Sometimes, the prints get stuck to the print beds, so they can also be used to remove those prints.

Tweezers

Get it on Amazon / Banggood

A full set of tweezers with various shapes and sizes is a must when it comes to the more complicated tasks with 3D printing. They offer a very good and cheap solution for very fine and high precision adjustments in your 3D printer or printed parts.

They’re great for plucking oozing filament from the extruder nozzle without burning your fingers. Also, they can be used for post-processing finishing of your prints.

Sandpaper

Get it on Amazon / Banggood

Having a set of sandpapers in a variety of different grits can be very useful in the post-processing step of your printing. A good sandpaper will help you define the details on your print and smooth out any rough edges and surfaces.

We recommend buying a set of good quality sandpaper from a well-known brand, from coarse (120 grit) to fine (1000 grit or more). Good quality sandpaper does not wear out easily, making it last longer and saving you money in the long run.

Alternative: Rotary Tool

Get it on Amazon / Banggood

As an alternative, you can use a rotary tool with different accessories, which will make things much easier and accurate as well.

Digital Caliper

Get it on Amazon / Banggood

A digital caliper is a must-have tool for detail-oriented 3D print maker. When 3D printing, there can be a lot of measurements involved, so this tool will help you increase efficiency and accuracy, which is very important.

It enables you to make very precise measurements of a part you want to replicate in 3D, to verify the dimensions of a calibration print, or to check the precision of the measurements of your prints versus the dimensions in the source CAD model.

Calipers are also handy for checking the accuracy of your 3D printing filaments, since the actual filament diameters often differ from what is advertised. This will help you make the necessary adjustment.

The key to successful 3D print lies in getting a good first layer. And to get a good first layer, you need to have the right print bed surface which needs to have a smooth finish and to be rigid and durable as well.

Some people like to swap out their default print beds for glass plated ones, because they handle heat better and won’t warp the printed parts as easily.

Borosilicate Glass Bed

Get it on Amazon / Banggood

Borosilicate glass can withstand extremely high temperatures, since it’s tempered. Also, it helps giving the print a smooth finish. When buying glass print bed make sure its dimensions match your model of 3D printer.

Alternative: Heat Bed Platform Sticker

Get it on Amazon / Banggood

This printing surface is compatible with almost every printing material. You can print directly onto the surface without any additional adhesives. Once you’re done printing, it is very easy to remove your printed part without damaging it.

You can use it for multiple prints and all you need to do is to wipe down with isopropyl alcohol between prints. Also, it can be easily cut to the desired size with a utility knife.

Nozzle Set

Get it on Amazon / Banggood

Nozzles come in many different shapes and sizes, but they all have the same function. Why would you want to have more than one size nozzle?

There are a few reasons why: for example, you want to print a larger model quickly, so you need to use a larger nozzle; you want fine details on your print, or you have an intricate print, so you need to use smaller nozzle; or your current nozzle gets clogged, so you need to replace it.

Nozzle Cleaning Kit

Get it on Amazon / Banggood

The extruder nozzle can easily get clogged with melted plastic after frequent use. It is one of the most significant parts of your 3D printer, so it is very important to keep it maintained, ensuring the quality of your 3D prints.

Cleaning the nozzles is not as easy as it seems, so you want to make sure you have the right tool for this purpose. There are special nozzle cleaning kits, designed for cleaning different sizes of nozzles, so as long as you have this accessory, you’ll always be able to keep your 3D printer clean and ready for the next print.

Solutions for Better Finish

After a part comes out of the printer, it needs to undergo a surface finishing process before it’s ready for use because you can often see its laminated appearance and roughness. So, there are so many reasons to finish a 3D printed part, for example, you might want to enhance its appearance, to smooth out uneven surfaces, or to improve its durability.

Depending on the 3D printing material, you can choose acetone, or XTC-3D high performance 3D print coating.

Acetone

Get it on Amazon

By using acetone, you can easily achieve a smooth and polished surface to your ABS 3D prints. A thin layer of this product is just enough to get a better finish. Be very careful when deciding to use acetone, since it is not compatible with all materials.

XTC-3D High Performance 3D Print Coating

Get it on Amazon

We know that ABS can be smoothed with acetone, but when it comes to PLA, that’s not the case. This epoxy is a protective coating for smoothing and finishing 3D printed parts.

You just need to mix the two liquids together and apply the mixture onto any 3D print. It dries uniformly without leaving brush strokes. Working time is about 10 minutes, and it takes about 4 hours to cure.

Super Glue

Thicker: Get it on Amazon

Thinner: Get it on Amazon / Banggood

Super glue has endless supply of uses for 3D printing jobs, and is incredibly effective. It can be used to fill in gaps, to repair broken parts, and to combine two or more smaller 3D printed parts together.

Different types of glue are used for different jobs. For example, for filling gaps a thicker type of glue is required whilst for delicate procedures, like combining two components together, a thinner type of glue is more appropriate.

Alternative: Acetone

Get it on Amazon

Acetone can be used for bonding 3D printed parts made of PLA, ABS or HIPS. In fact, it can be used for any material soluble in acetone. It gives very strong bond, and, if done properly it creates invisible seam.

Additional 3D Printer Accessories – 3D Scanner

Get it on Amazon / Banggood

Having a 3D scanner will take your 3D printing experience to the next level, as it enables you to create accurate 3D models from actual real objects.

There are so many portable, relatively cheap and easy to use scanners on the market. It’s an ideal choice for anyone who wants a compact device that’s easy to carry around and is one of the most beginner-friendly machines around.

Read more: Creality CR-10 V3 Review – Is It the Best Mid-Range 3D Printer?

Conclusion

Choosing the right 3D printer accessories greatly increases the chances of creating a flawless 3D print. These decent investments can make the 3D printing process much easier and enjoyable.

Which of these 3D printer accessories do you already use? Do you have some other useful 3D printer accessories that are not on the list and should be? I’d love to hear about it in the comments section below.

If you want to buy a 3D printer check out our list of the best budget friendly 3D printers that are ideal for hobbyists and beginners who are just getting started.

Best 3D Printing Accessories: Make the most of your 3D printer

Like any mechanical pastime 3D printing often requires tools to make it function. More than that, good accessories can make even the best 3D printers run above and beyond their normal scope. Often these accessories are simple; a set of snips for cutting filament or a bit of glue to help bed adhesion, but there are also new pieces of hardware that can significantly improve your print quality or give your 3D printer powers it never had before.

I have amassed a huge amount of helpful accessories over nearly a decade of 3D printing and have researched many others. Amazon is of course a great resource for finding basic 3D printing accessories and California-based Matterhackers has everything you need for more advanced upgrades and gear.

The best accessories for beginners

Buildtak

Buildtak 3D printer scraper

Lift your models with ease

While every 3D printer comes with a paint scraper that you can use to remove models from the build plate, not all are created equal. Most 3D printer scrapers don't allow you to get the blade low enough to lift a model without damaging the build surface. I use the Buildtak 3D printer scraper because it can swipe under the model without gouging down, making them pop right back up.

$19 at Amazon

$43 at Walmart

You're receiving price alerts for BuildTak 3D Printing Spatula, Stainless Steel Blade + Ergonomic Handle, Black and Red, (Quantity 1)

James Bricknell / CNET

Portable caddy basket

Keep all your tools together

These little storage caddies are incredibly helpful for more than just storing shower products. The separate compartments make it easy to store all of your hex key wrenches, scrapers, and filament cutters in a way that makes it easy to move them around your workspace with the handy handle. I have three of these in my workshop and I use them for 3D printing tools, assorted glues, and assorted sandpaper. It makes life a lot easier.

$10 at Amazon

You're receiving price alerts for Portable Shower Caddy Basket with Compartments Cleaning Supplies Organizer with Handle Plastic Storage Divided Basket Tool Bin for Bathroom, Bedroom, Kitchen, College Dorm, Garden, Under Sink, Black

VASTOOLS

VASTOOLS Swivel Head Deburring Tool

Remove any sharp edges

Models often have sharp edges when they first come off of the build plate, especially if you have used a brim to anchor them down. A deburring tool like this smoothes those edges with a simple swipe across the corner. It takes a little getting used to, but if you are making something for people to handle, a deburring tool is a must.

$7 at Amazon

You're receiving price alerts for VASTOOLS Swivel Head Deburring Tool 6-1/2" Metal Handle Chamfer Tool Removing Burr from Aluminum Copper Brass Resin and Plastic Pipes

Tekton

TEKTON Metric Hex Key Wrench Set

3D printers are metric

If you live here in the USA you may well have a set of hex wrenches that you use for most things. Unfortunately, 3D printers are made using metric measurements, and not inches, so they will either be loose and damage the nut, or not fit at all. A good set of metric hex wrenches are affordable and make 3D printing easier.

$13 at Amazon

You're receiving price alerts for TEKTON Hex Key Wrench Set, 13-Piece (1. 27-10 mm) | 25242

DryTote

Reusable desiccant pouches (5-pack)

Keep your filament dry

Desiccant is a much need tool in the fight against moisture. Even the best 3d printing filament can be degraded by absorbing too much moisture, and if you live in damp climates storing your filament in a cool dry place with a desiccant pouch is a great way to keep them usable for longer. These pouches are a little pricier than some, but they can be recharged by heating them up so you can use them again and again.

$36 at Amazon

You're receiving price alerts for 100g Rechargeable Desiccant Pack of 5 - Moisture Absorbing Bag - Desiccant Dehumidifier for Storage Bins and Totes …

Aquanet

Aqua Net firm-hold hairspray

Hold your model to the build plate

Did you know that the 3D printing community uses so much Aqua Net hairspray that Amazon's "Frequently bought together" section shows filament and replacement printer beds? Aqua Net is used as a transition adhesive that both helps your filament stick to the build plate, and when it gets cold, makes it easier to remove. You have to be careful not to spray it onto any moving parts, but if you take off your removable build plate and spray it gently and evenly you will see better results immediately.

$10 at Amazon

$19 at Walmart

You're receiving price alerts for Aqua Net Extra Super Hold Professional Hair Spray Unscented 11 oz

Elmers

Elmer's glue stick 12 count

Water washable adhesion

Like the hairspray, glue sticks help hold a print down, while also adding a barrier between the print and the plate. Some materials stick a little too well to a build plate and can tear a mat or even crack a glass plate. Glue stick is water soluble too, so it's easy to wash off with soap and water.

$6 at Amazon

You're receiving price alerts for Elmer's Disappearing Purple School Glue Sticks, Washable, 6 Grams, 12 Count

Accessories for intermediate and advanced users

Matterhackers

PrintDry PRO Filament Drying System

Store the filament you are using safely

Even if your filament gets damp it isn't completely useless. Fortunately, most filaments can be dried out again if you have the right tools. Desiccant will help stop it from getting damp, but the PrintDry Pro from Matterhackers will dry it out if it is already damp, and keep it dry while it is printing in the machine. It's an ingenious product that can store two 1kg spools that can be used by the machine while they are safely inside. In any place that isn't a desert, the PrintDry is invaluable.

$190 at Matterhackers

Wham Bam

Wham Bam Hot Box

Regulate the temperature

If you are hoping to print a filament like ABS you will need your 3D printer to be very hot with no breezes. If you live in a particularly cold climate an enclosure is a helpful way to warm up the area around your 3D printer without having to pay a fortune on heating bills. The Wham Bam Hotbox has two sizes so even if you have a bigger machine you can reap the benefits of a warmer build area.

$169 at Wham Bam 3D

E3D

E3D RapidChange Revo Six Hotend Kit

My favorite upgrade

One of the best upgrades to be released in recent years is the Revo rapid change system from E3D. Available for a huge amount of 3D printers this hotend replacement adds the ability to quickly swap out your nozzles without the use of wrenches and pliers. You can remove the filament, let the nozzle cool down and twist it off with your fingers.

Being able to easily swap nozzles opens up new printing techniques with larger nozzles for strength and smaller ones for detail. It is a must-do upgrade for any compatible machine.

$89 at Matterhackers

Matterhackers

E3D Obxidian hardened nozzle

The last nozzle you'll ever need

Nozzles are consumable in 3D printing and you can expect to use them up fairly frequently. If you print materials with abrasive materials in such as carbon fiber, wood or even glow in the dark then your nozzle could be destroyed in just one 8-hour session. The Obxidian nozzle is specially hardened to reduce the wear and tear and keep your nozzle printing for much longer.

It's also a part of the Revo system I just mentioned so can be easily swapped out for different sizes or other nozzles easily.

$43 at Matterhackers

Mosaic

Mosaic Palette 3 Pro

All the colors!

The Palette 3 is a multi-material unit that lets your standard 3D printer print multiple colors or types of filament. It opens up a huge amount of variety in your 3D printing and can help you create a truly unique model. You can even take an existing digital model and "paint" colors onto it so that when it prints, it is a multitude of -- well up to eight -- colors.

$800 at Matterhackers

Repkord

Repkord Repbox

Store your filament for use

The Repbox is a community favorite for a number of reasons. The creator is an awesome advocate for 3D printing and the box itself is a fantastic design that can be mounted or sat on a workbench. The Repbox holds 6 1kg rolls of filament and comes with several dehydrating cases to keep them fresh. The filament is fed out of the box directly into a Palette system or multiple printers without ever touching the moist air.

$220 at Repkord

3D printer accessories FAQ

What is the best 3d printing tool for beginners?

When you first start 3D printing the most important thing to get right is your first layer. It takes time to get the build plate level enough to print consistently so any tool that can help with that is important. Any of the bed adhesives in this list will help your first layer lay down better, and make it easier to remove the print once it is done.

Gluestick and hairspray may seem like low-tech solutions for a high-tech machine, but they work, and they are cheap.

How does nozzle size affect 3d printing?

Nozzle size determines how much material you can push through at any given time. The standard nozzle has a 0.4mm hole in it but there are nozzles available from 0.2mm to 0.8mm and beyond. A good rule of thumb is that if you want a stronger print go big and if you want detail go small.

I would say that there is a move to replace 0.4mm nozzles with 0.6mm nozzles as a standard as you lose very little detail in the change, but the models print quicker and tend to be stronger too.

📷 Best Camera 3D Print Files・Cults

📷 Best Camera 3D Print Files

Free Download Camera Accessories 3D Files

printer accessories for your camera. You can find handles, cases, protective cases, straps, tripods for your Canon, Nikon, Leica, Sony, Panasonic cameras, etc. 3D printing will help you get the most out of your camera.

Lens Cap Holder

Free

Lens Hood

Free

Camera Gimbal

Free

Made with Love Bokeh Kit

Free

LiftPod - Multipurpose Foldable Stand

Free

Bokeh Kit

Free

SD Card Holder

Free

Professional DSLR slider V4.

Free

Flip Lens Cap

Free

Electric_Driver_Upgrade_For_Slider_V4.0

Free

LiftPod - Easy Lock Edition

Free

Adapter thread M42 to Sony E (NEX)

Free

Shoulder rig

Free

Smartphone teleprompter - tripod adapter

Free

Foldable Mini Tripod

Free

3D printed pinhole camera

Free

SD and micro SD holder 1-10 elements

Free

60 NeoPixel Ring Camera Mount

Free

DSLR Camera FollowSlider V2.

Free

Camera hot shoe - Universal phone holder

Free

3D Printed Pinhole 35 mm

Free

Canon EF Eyecup

Free

Camera Lens Cap Holder - 62mm

Free

Canon lens hood

Free

Simple Camera Slider

Free

Tripod Ball Head

Free

Sony A6000/A7 Hot Shoe Cover

Free

Sony E-mount Rear Lens Cap

Free

Proteus LED Light Panel - DIY and Expandable

Free

Cage modular DSLR

Free

Rollei QAL-40 Camera Mounting Plate (C4i, C5i, C40i, C50i, Compact Traveler No 1, Compact Traveler No 10, CT-4A, CT-5A, CT-5C, M5 Mini, PGA-584, PGA-484, TT-1, T2S)

Free

Tripod Leveler

Free

Smooth Q Gimbal - Camera Attachment (Sony RX100 & Others)

Free

Shoulder rig for DSLR (NOT just for Canon 5D)

Free

Mini Tripods

Free

Adapter m43 (m4/3) to canon FD lens

1,50 €

Hand held Camera Rig

Free

SONY 9 55mm lens cap0009

Free

Camera speedlight umbrella flash holder

Free

Sony A-Mount Overhead Lens Mount

Free

1-Wege-Stativneiger, 1 Way Tilt Head

Free

Motorized Camera Slider MK3

Free

Sony E-Mount body to Nikon F-Mount Lens adapter

Free

Protective cage for cage modular DSLR

Free

Digital Camera Pinhole Adapter

Free

Handle for Cage modular DSLR

Free

Lens Cap

Free

Trekking Pole Monopod with Quick-Release

Free

Here is our selection of best STL files for camera , all these accessories are taken from Cults STL file library and available for 3D printing .

This collection includes free 3D files of camera accessories. Many 3D models of were created by members of our 9 community0202 3D designers as well as photographers. Therefore, they are fully aware of the operating limitations of each camera. They have designed a very wide range of 3D printed camera accessories for cameras for owners of Canon, Nikon, Leica, Sony or Panasonic cameras. All brands of cameras are represented here.

Many camera parts are made of plastic, as are accessories such as tripods, sun visors or shutters. In this context, it is quite logical to think about 3D printing. Therefore 3D designers compete in ingenuity, creating truly ingenious models, such as gambling or time-lapse automatic accessories.

3D Printing Accessories - 3DPrinter

Showing 1-25 of 64

Initial SortBy PopularityBy RatingSort By Latest Price: Ascending Price: Descending

Hardened platform for Sapphire

280 UAH

Sapphire 9 Hardened Durable 3D Printer Platform0009

Dimensions*: 310x310x4 mm

There are also standard glossy and matt platforms in this size.

Check the size of your platform carefully before purchasing!

Add to cart

Tempered glass platform for Prime X 3D printer

270 UAH

Platform size: 320x320x4 mm

Used for Prime X 3d printer

Dear customers! Platforms 320x320mm - packed in a box with a volume weight of about 5 kg with additional. fillers (delivery cost according to NP tariffs)

E3D hardened nozzle for 3D printer

71 UAH

NEW!

Popular E3D hardened steel nozzles. An indispensable assistant when working with composite materials. Longer life than classic steel nozzles.

Assorted diameter.

Add to cart

Nozzle kit MK6 for 3D printer

100 UAH

This set consists of 5 nozzles.

A convenient solution for completing your 3D printer.

Nozzles of any diameter can be purchased individually.

Nozzle set can be completed according to your wishes.

Container for tools/hardware – Sale!

25 UAH – 40 UAH

Organizers for storing tools or small parts
The rear wall has lugs for hanging mounting.
Medium sized bins stack comfortably and take up little space.
Small containers are placed on top of each other on a special legs and sides.
Colour: black

Dimensions
Small container - 170x100x75 mm. Weight - 94 g
Medium container - 230x160x120 mm. Weight - 153 g
Material: polypropylene

Please note! Containers may have scuffs and scratches.

Magnetic thermal mat for Ender, Tevo, Anet, Anycubic

400 UAH – 460 UAH

The most convenient thermal mat for 3D printing

For platform 235x235 mm, 220x220 mm and 200x200 mm

Contents: adhesive magnetic base + mat
For maximum efficiency, it is not recommended to heat the mat over 80°C

Matte glass platform 3D printer with increased adhesion

190 UAH – 215 UAH

Frosted glass tops available in most popular sizes.

Platform thickness 4 mm.

Dear customers!

When ordering from 3 matte glass platforms - delivery is free.

Add to cart

Mini spatula for SLA/LCD printer

48 UAH

Handy little spatula for removing details after photopolymer printing. It can also be used to work with FDM printers.

Quality engineering and casting resins you can find in our shop.

Add to cart

Hexagon set for 3D printer

35 UAH

The kit includes the most necessary hex keys for a 3D printer: 1.5 mm, 2 mm, 2.5 mm and 3 mm.
The set consists of 4 hexagons.

Nozzle MK8 for Ender and Anet

25 UAH

Excellent nozzle MK8 for popular models of 3D printers Creality, Ender, Anet, Tevo, FlyingBear and others.

Various nozzle diameters available.

Nozzle for 3D printer Flashforge and Wanhao (MK10)

35 UAH

Nozzle for Teflon tube 4x2 mm, suitable for Flashforge, Wanhao 3D printers and other 3D printer extruders with heating block with M7 thread.

This nozzle is used for printing plastic with a filament diameter of 1.75mm.

*Different diameter nozzles available.

Steel nozzle MK8 long for 3D printer

40 UAH

Extended steel nozzle MK8 for 3D printers Ender, Creality, Anet and extruders of other 3D printers with M6 thread.
This nozzle has an extended thread.

Length: 15.4 mm

Nozzle diameter: 0.2 mm; 0.4 mm; 0.6 mm

Volcano steel nozzle for 3D printer

43 UAH

NEW!

Vulcano steel nozzles with a diameter of 0.4; 0.8 and 1.0 mm are already available in our store!

These nozzles are used for printing with composite abrasives. They are not recommended for printing with PLA plastic.

Thermal insulation for 3D printer platform

100 UAH – 135 UAH

Insulation for the 3D printer table will not only speed up the warm-up of your platform, but will also increase the warm-up temperature.

Universal reel holder for plastic

150 UAH