(506) 2240-6804
Aliexpress 3d printing
Best 3D Printing Surfaces For Your 3D Printer
Since I started 3D printing, bed adhesion was one of the most common topics I’ve seen online. Most people have issues with bed adhesion, and most of the time it’s caused by improper bed leveling. But there are other cases where the print surface is not the right thing for the job, or it’s low quality.
In this article, I will go over a few 3D printing surfaces which can be used with your 3D printer to improve adhesion and ensure a good printing experience.
Magnetic PEI Flex Plate
One of my favorite 3D printing surfaces out there is the Magnetic PEI Flex Plate. It’s also known under different names, like a Magnetic Spring Steel Sheet or PEI sheet.
As the name implies, this is usually a flexible metallic sheet that has a PEI sheet applied to it and attaches magnetically to your heatbed. It’s made this way so you can remove the sheet when the print is completed, then flex the print surface to easily remove the printed model.
Probably the most popular PEI magnetic flex plate is the one with a powder-coated surface. But there are multiple versions out there. For example, you could get a double-sided powder-coated PEI sheet, but if you want more flexibility, you can choose one of the printing surfaces to be a smooth sheet of PEI. That way, you can control the finish of the printed model.
Just keep in mind that the smooth side will be less durable compared to the textured side, and if you’re not careful, it’s easy to scratch it. Below you can find an example of a damaged PEI sheet after I did some changes to the printer, and forgot to adjust the Z offset.
The PEI surface helps with adhesion, and it works for a wide range of materials, like PLA, PETG, ABS, and TPU, as long as you keep it clean and use the correct offset.
Here are a few sites where you can get PEI 3D printing surfaces:
AliExpress
Amazon
Banggood
BuildTak
My first contact with the Original BuildTak print surface was a few years ago when I reviewed the Raise3D E2.
I used other BuildTak-like print surfaces in the past, but never the original. It was a good experience, and I didn’t have issues with adhesion as long as the Z offset was properly set.
Since then I also got in contact with BuildTak and they made me some custom print surfaces with the 3DPrintBeginner logo to use on my printers. I installed them, and I must say, I love the adhesion you get.
With the BuildTak print surface, you can easily print PLA and TPU without even heating up the print surface. PETG and ABS need a bit of heat due to the nature of the material, but adhesion is just excellent.
I recently printed my HexaHive Speaker Stands on the Sidewinder X2 which has a BuildTak surface applied to the glass surface. Even though the base of the model covers most of the 310×310 print surface of the printer, I was able to print SUNLU PETG without even heating the bed, over about 2 days of printing for each stand. It works really well.
It’s worth mentioning that Z offset calibration is crucial when printing on BuildTak because if you print too low, the model will actually fuse to the print surface and you can damage it.
Speaking of damage, BuildTak print surfaces are also more delicate when it comes to the hot nozzle touching the print surface. Avoid doing that if you don’t want to get small holes in it. Ask me how I know 🙂
Overall, the BuildTak print surface is excellent if you mostly print PLA, PETG and TPU as you can do it without heating the bed. But I can’t say it’s much better than a PEI sheet when talking about other higher-temperature materials like ABS, PC, or ASA.
After a while, the Raise3D E2 BuildTak surface started to “bubble up” on the sections where I was printing most often. This happened after more than a few hundred hours of print time, but I didn’t encounter anything like that with PEI, so BuildTak might need to be replaced more often.
Here are a few sites where you can get BuildTak 3D printing surfaces:
BuildTak
Amazon
Glass Mirror
There are a lot of people who like to use a glass mirror as a print surface for their 3D printer. The most attractive feature of using a glass mirror as a print surface is the glossy finish you get on the bottom of your model.
Besides that, the cost of a glass mirror print surface is insignificant, considering you can get a piece of mirror the size of your heatbed for less than 10$. It’s widely available and you should have no trouble finding one.
You can print filaments like PLA and TPU directly on the glass surface, but for PETG and ABS, I recommend using some PVA glue stick to help with adhesion and also create a release layer. If you print PETG or ABS/ASA directly on the glass mirror, the filament can bond to the print surface.
One of the downsides of using a glass mirror as a print surface is the added weight, especially if you have a printer with a big heatbed. After you add the glass mirror to your heatbed, you might see increased ringing on your Y-axis. This only applies to cartesian 3D printers. Printers with a CoreXY movement system, where the bed only moves on the Z-axis is not impacted by this.
I used a glass mirror print surface only once, with my old Anet A8 3D printer.
It worked fine at that time, but after I discovered PEI printing surfaces, I never looked back.
Ultrabase
The Ultrabase print surface was first launched by Anycubic, and it’s a glass print surface with a textured finish on the top. This textured finish helps with model adhesion when the surface is hot. When the print is completed, and the ultrabase print surface starts to cool down, the model releases itself.
Nowadays, there are a lot of Ultrabase-like printing surfaces which come as a default printing surface for most 3D printers. Printers like the Artillery Sidewinder X2 and Genius come with something similar, and Creality sells most of their printers with a “carborundum” print surface which is just a fancy name for the same thing.
You can print filaments like PLA, PETG, ABS and PETG with the same considerations as for a simple glass mirror print surface.
In some cases, the Ultrabase clone print surfaces work well, but I also encountered situations where adhesion was just not as expected, and I needed to use adhesion materials to get a consistent result.
If you are thinking about upgrading your printer and purchasing an Ultrabase print surface, I recommend checking out other 3D printing surfaces. Not because this one is not good, but there are other alternatives like PEI and BuildTak which are much better and weigh a bit less compared to this.
Here are a few sites where you can get Ultrabase 3D printing surfaces:
AliExpress
Amazon
Banggood
Garolyte / FR4 Sheet
These garolite sheets are also a good 3D printing surface because it is much lighter than glass and quite cheap. You can print most filaments on it, including PETG which doesn’t work that well on glass.
Maker’s muse has a good video about this printing surface with a lot of details and use cases, so I recommend watching it for more information.
I still like these FR4 sheets less than PEI magnetic flex plates because they still require the use of paper clips to hold them in place.
Otherwise, I think they are a good alternative.
Here are a few websites where you can get FR4 3D printing surfaces
AliExpress
Amazon
Banggood
Textured and Holographic 3D Vinyl
You can also purchase textured 3D vinyl to use as a printing surface for your 3D printer. Sure, these are not made specifically for a 3D printer, but you can print PLA on almost anything so there’s no surprise people started doing this.
I’ve seen people install textured carbon fiber vinyl on their glass print surface, to get the same texture on the bottom of their prints.
Others are using this holographic film which has a nice rainbow effect that transfers to the model. If you like this effect, then order some, and please leave a comment with your results. I would love to see how it works, and what kind of useful applications you found. I am more of a matte finish person, so I didn’t try this yet.
Just remember that adhesion might not be the best with some filaments, and this should be used only in specific cases.
Here are a few sites where you can get Textured and Holographic 3D printing surfaces:
Amazon
AliExpress
Liked it?Consider supporting 3DPrintBeginner if this content helped. You can also join Patreon for exclusive perks! |
Top 15 Must-Have 3D Printer Accessories and Tools
3D printing industry has seen an accelerated growth in development over the years. From the massive and quite expensive 3D printers in the past, the models available today are more compact, affordable and easy to use. However, successful 3D printing does not only depend on the 3D printer itself. There are a variety of 3D printer accessories that play an important role when it comes to the quality of the final product.
With the right accessories, you can turn your average 3D printer into an incredible machine and you can be more assured that your prints will come out exactly as desired.
From removing support material to improving bed plate adhesion, here is a list of the top 15 3D printer accessories that will help you get the most of your 3D printer.
Disclosure: There are affiliate links in this article. As an Amazon Associate I earn from qualifying purchases.
Filament Storage Container
Get it on Amazon / AliExpress / Banggood
One of the most important accessories a 3D printer owner must possess is an appropriate filament storage container.
Most of the 3D printer owners don’t pay attention to that, which can lead to so many problems like clogging, bad layer adhesion, breakage, etc. That’s why it is very important to safely store your filaments in a moisture free environment.
The first option is a filament box, which keeps your filament dry, dust-free, and also dispenses filament. It has temperature and humidity sensor, and you can also print directly from the box.
Vacuum Sealed Storage Containers
Get it on Amazon
Another great option are vacuum sealed storage containers. They come in a pack of 5, which is pretty awesome.
Masking Tape
Get it on Amazon / Banggood
Masking tape is one of the most widely used 3D printing accessories. It is used to help each print adhere better to the print bed and is highly recommended. Furthermore, the finished print is much easier to remove from the bed as well as protect it from scratches.
Make sure you choose masking tape with a width of at least 5 cm (2 inches). Having a wider tape means you’ll need fewer strips to cover your print bed, which will lead to better results.
Alternative: Kapton Tape
Get it on Amazon / Banggood
Although masking tape has been widely used for covering print beds and is cheaper option, Kapton tape is much better in the long term since it handles high temperatures better. This tape also prevents severe warping resulting in a much better 3D print. Kapton tape can be combined with other products, such as hairspray for best results.
PVA Glue Stick
Get it on Amazon / Banggood
When 3D printing, it’s vital to ensure good adhesion of your print to the build plate.
So, another way to increase plate adhesion is covering your print bed with washable glue stick. You can apply glue directly to your build plate and wipe it off easily with water.
This is one of the best bed adhesion solutions and works well with most materials, except for those prone to very high warpage like ABS and polycarbonate.
It works pretty well and it can easily be found at a wide variety of stores and at a very reasonable price.
Alternative: Hair Spray
Get it on Amazon
Many people also recommend spraying the bed with hair spray. Using hairspray to add an extra layer of ‘stickiness’ to your print bed is a quick and easy process.
But you must be careful with this method because using hairspray regularly and without proper care can damage your printer.
3D Print Removal Tool
Get it on Amazon / Banggood
Sometimes you might find that your 3D print has stuck to your build plate.
A 3D print removal tool, or spatula, can easily solve this problem. All you need to do is to put it gently underneath the print and carefully lift it up. You can also use this tool for scraping off little bits of filament.
You probably got a one with your 3D printer, but that’s just a generic spatula which sometimes doesn’t do the job.
This set of different spatulas ensures you always have the right tool for removing any object you print. These spatulas are as thin as a knife blade, but without the sharp edge. They’re also usually angled in such a way that you can hold the handle parallel to the bed. It will prevent you from scratching the tray or damaging the part. I consider this set as an essential 3D printer accessory.
Carving Tools
Get it on Amazon / Banggood
When printing parts with a lot of little details and supporting material, you need to do some extra work to get a good finished look. For finishing the 3D prints where a little work is required, this set of carving tools is perfect for smoothing out your final product by removing excess filament and bringing to perfection all the little details.
This set contains 12 different carving tools of varying shapes and sizes that will meet most of your needs.
Alternative: Diamond Needle File Set
Get it on Amazon / Banggood
Another tool perfect for working on small, delicate projects is a diamond needle file. This set includes 6 pieces with different shape and size, and each one serves a different purpose.
Pliers
Get it on Amazon / Banggood
Needle-nose pliers can allow you to get into the fiddly areas of your 3D printer and your prints while providing a good, strong grip. Always look for a good quality pair of pliers with a rubberized, slip-resistant grip.
They can be used to remove jams in your 3D printer, to cut filaments, or to install new filaments. Sometimes, the prints get stuck to the print beds, so they can also be used to remove those prints.
Tweezers
Get it on Amazon / Banggood
A full set of tweezers with various shapes and sizes is a must when it comes to the more complicated tasks with 3D printing.
They offer a very good and cheap solution for very fine and high precision adjustments in your 3D printer or printed parts.
They’re great for plucking oozing filament from the extruder nozzle without burning your fingers. Also, they can be used for post-processing finishing of your prints.
Sandpaper
Get it on Amazon / Banggood
Having a set of sandpapers in a variety of different grits can be very useful in the post-processing step of your printing. A good sandpaper will help you define the details on your print and smooth out any rough edges and surfaces.
We recommend buying a set of good quality sandpaper from a well-known brand, from coarse (120 grit) to fine (1000 grit or more). Good quality sandpaper does not wear out easily, making it last longer and saving you money in the long run.
Alternative: Rotary Tool
Get it on Amazon / Banggood
As an alternative, you can use a rotary tool with different accessories, which will make things much easier and accurate as well.
Digital Caliper
Get it on Amazon / Banggood
A digital caliper is a must-have tool for detail-oriented 3D print maker. When 3D printing, there can be a lot of measurements involved, so this tool will help you increase efficiency and accuracy, which is very important.
It enables you to make very precise measurements of a part you want to replicate in 3D, to verify the dimensions of a calibration print, or to check the precision of the measurements of your prints versus the dimensions in the source CAD model.
Calipers are also handy for checking the accuracy of your 3D printing filaments, since the actual filament diameters often differ from what is advertised. This will help you make the necessary adjustment.
The key to successful 3D print lies in getting a good first layer. And to get a good first layer, you need to have the right print bed surface which needs to have a smooth finish and to be rigid and durable as well.
Some people like to swap out their default print beds for glass plated ones, because they handle heat better and won’t warp the printed parts as easily.
Borosilicate Glass Bed
Get it on Amazon / Banggood
Borosilicate glass can withstand extremely high temperatures, since it’s tempered. Also, it helps giving the print a smooth finish. When buying glass print bed make sure its dimensions match your model of 3D printer.
Alternative: Heat Bed Platform Sticker
Get it on Amazon / Banggood
This printing surface is compatible with almost every printing material. You can print directly onto the surface without any additional adhesives. Once you’re done printing, it is very easy to remove your printed part without damaging it.
You can use it for multiple prints and all you need to do is to wipe down with isopropyl alcohol between prints. Also, it can be easily cut to the desired size with a utility knife.
Nozzle Set
Get it on Amazon / Banggood
Nozzles come in many different shapes and sizes, but they all have the same function.
Why would you want to have more than one size nozzle?
There are a few reasons why: for example, you want to print a larger model quickly, so you need to use a larger nozzle; you want fine details on your print, or you have an intricate print, so you need to use smaller nozzle; or your current nozzle gets clogged, so you need to replace it.
Nozzle Cleaning Kit
Get it on Amazon / Banggood
The extruder nozzle can easily get clogged with melted plastic after frequent use. It is one of the most significant parts of your 3D printer, so it is very important to keep it maintained, ensuring the quality of your 3D prints.
Cleaning the nozzles is not as easy as it seems, so you want to make sure you have the right tool for this purpose. There are special nozzle cleaning kits, designed for cleaning different sizes of nozzles, so as long as you have this accessory, you’ll always be able to keep your 3D printer clean and ready for the next print.
Solutions for Better Finish
After a part comes out of the printer, it needs to undergo a surface finishing process before it’s ready for use because you can often see its laminated appearance and roughness.
So, there are so many reasons to finish a 3D printed part, for example, you might want to enhance its appearance, to smooth out uneven surfaces, or to improve its durability.
Depending on the 3D printing material, you can choose acetone, or XTC-3D high performance 3D print coating.
Acetone
Get it on Amazon
By using acetone, you can easily achieve a smooth and polished surface to your ABS 3D prints. A thin layer of this product is just enough to get a better finish. Be very careful when deciding to use acetone, since it is not compatible with all materials.
XTC-3D High Performance 3D Print Coating
Get it on Amazon
We know that ABS can be smoothed with acetone, but when it comes to PLA, that’s not the case. This epoxy is a protective coating for smoothing and finishing 3D printed parts.
You just need to mix the two liquids together and apply the mixture onto any 3D print. It dries uniformly without leaving brush strokes.
Working time is about 10 minutes, and it takes about 4 hours to cure.
Super Glue
Thicker: Get it on Amazon
Thinner: Get it on Amazon / Banggood
Super glue has endless supply of uses for 3D printing jobs, and is incredibly effective. It can be used to fill in gaps, to repair broken parts, and to combine two or more smaller 3D printed parts together.
Different types of glue are used for different jobs. For example, for filling gaps a thicker type of glue is required whilst for delicate procedures, like combining two components together, a thinner type of glue is more appropriate.
Alternative: Acetone
Get it on Amazon
Acetone can be used for bonding 3D printed parts made of PLA, ABS or HIPS. In fact, it can be used for any material soluble in acetone. It gives very strong bond, and, if done properly it creates invisible seam.
Additional 3D Printer Accessories – 3D Scanner
Get it on Amazon / Banggood
Having a 3D scanner will take your 3D printing experience to the next level, as it enables you to create accurate 3D models from actual real objects.
There are so many portable, relatively cheap and easy to use scanners on the market. It’s an ideal choice for anyone who wants a compact device that’s easy to carry around and is one of the most beginner-friendly machines around.
Read more: Creality CR-10 V3 Review – Is It the Best Mid-Range 3D Printer?
Conclusion
Choosing the right 3D printer accessories greatly increases the chances of creating a flawless 3D print. These decent investments can make the 3D printing process much easier and enjoyable.
Which of these 3D printer accessories do you already use? Do you have some other useful 3D printer accessories that are not on the list and should be? I’d love to hear about it in the comments section below.
If you want to buy a 3D printer check out our list of the best budget friendly 3D printers that are ideal for hobbyists and beginners who are just getting started.
TOP 10 3D printers from Aliexpress | Rating 2023
On Aliexpress, you can profitably buy a high-quality 3D printer.
The prices here are very good.
Promo codes until January 31, 2023
Let's look at the TOP 10 3D printers from Aliexpress.
In this selection, you will see the best 3D printers in terms of price and quality for 2022 and 2023.
1. Creality Ender-3 3D printer.
Customer Review: “Amazing speed! The seller is great! 2 days from order to delivery to St. Petersburg! Everything is in perfect condition and complete set! Includes protective box, glass plate and 5 nozzles (cartridges available). As long as everyone likes it. I think for the money this is the best 3D printer. nine0003
LOOK AT ALI
2. Flyingbear-Ghost 3D Printer 5.
Customer Review: There are already 4 TMC2225 drivers in the kit, they are very quiet and it really pleased me. Only the fan blowing the hotend is heard. Assembled in a couple of hours, the table calibrated easily.
Prints well. Before buying I watched the review on youtube. Great budget 3D printer!
Recommended: the best lathes from Aliexpress.
LOOK AT ALI
3. Anycubic Mega-S 3D printer.
Customer review: “The 3D printer arrived in a week from the Russian warehouse and prints well after setting up the table, the rest of the plastic arrived at the same time. All equipment is in place. The print quality is good. It fully justifies its price. He has a super rating.
LOOK AT ALI
4. Creality Ender-3X 3D printer.
Customer Review: “Bought a 11.11 Ender 3 X 3D printer for 12600 + free courier delivery. The goods arrived in the Nizhny Novgorod region in 3 days. Satisfied with the quality. Assembly instructions are included. Collected quickly. There are no errors. Reviews are great.”
Recommended: the best graphics tablets from Aliexpress.
LOOK AT ALI
5. Artillery Sidewinder X1 SW-X1 3D printer.
Customer review: “Great cheap 3v printer. Prints great! There is no preset for ABS in the software package, and with a preset from PLA, your ABS part will peel off the table. I experimentally found out that for ABS you need a table temperature of 120, an extruder of 240 degrees during the entire printing. You can take!
LOOK AT ALI
6. Creality Ender-3 V2 3D printer.
Customer Review: “Great 3D printer for the home. Corresponds to the description by 100%, it makes no sense to load extra images. Excellent printer, Moscow delivery 3-5 days after payment. Receive by Russian post. Thank you seller. The quality is excellent. The purchase is fully justified. " nine0003
Recommended: the best handheld vacuum cleaners from Aliexpress.
LOOK AT ALI
7.
Tronxy XY-3 PRO V2 3D printer.
Customer Review: “This is my second printer, I left my choice on it. Unwrapped everything and checked everything. Assembled for 5+. Even the wheels are perfectly aligned. Prints beyond expectations. No worse than Ender for sure. Even better. There is nothing to upgrade. Excellent printer. If you change the case fan, it will become generally silent. Recommend!" nine0003
LOOK AT ALI
8. Flying Bear Ghost 5 3D printer from Aliexpress.
Customer review: “Everything is super. The printer arrived in 5 days, the package is complete, a lot of nishtyakov. Easy to assemble, prints well. Of the minuses: the drivers on the Z and extruder are noisy, the bowden with the gearbox is super slow. I recommend despite the minuses. ”
Recommended: the best 3D pens from Aliexpress.
LOOK AT ALI
9. Anycubic Photon Mono 3D printer.
Customer Review: “Best Resin 3D Printer! It is quite inexpensive. Delivered in 3 days, the seller answered all questions, the resin was sent from another warehouse, but it's not scary, the printer can be printed out of the box, calibrated the table and go. There were no problems.”
LOOK AT ALI
10. Kingroon KP3S 3D printer.
Customer Review: “I think this is the best 3D printer from Aliexpress. Delivery to St. Petersburg 2 days. The print quality is amazing! Resin smells really bad, it's definitely not suitable for typing in the bedroom! Quality made all the details, ease of use from the box! Polite sellers answer immediately! The resin comes in a set of 500 ml, I have a green color, you can’t choose a color, and this is not a problem! Thank you, the printer pleased!
Recommended: the best laser engravers from Aliexpress.
LOOK AT ALI
Editor's choice: ZONESTAR Z6 portable 3D printer.
So we reviewed the TOP 10 3D printers from Aliexpress. As you can see, the prices here are much lower than in household appliances stores.
Using a 3D printer, you can print any models and layouts. Great for home entertainment.
Coupons until January 31, 2023
Gradient plastic for 3D printer from AliExpress / 3D printers, machines and accessories / iXBT Live
Hello everyone! 3D printers have ceased to be super-expensive exotics that were only in secret laboratories or "lairs" of advanced technologists, now they are quite affordable and ordinary "household devices" (also thanks to AliExpress), which are increasingly found in the homes of advanced users. The most popular and inexpensive are FDM printers, for which a plastic rod is used as a consumable. Manufacturers of consumables, trying to diversify their range of products, offer different types of plastic for printing, all kinds of colors and even textures, such as carbon, marble or wood.
Not so long ago, “silk” plastic appeared, I will talk about one of its options, gradient PLA plastic from SANLU, in this review. nine0003
What is gradient plastic? This is a printing rod, the color of which changes from one to another every few meters along its entire length. There are both two-color coils and multi-colored, all colors of the rainbow. Models printed with such plastic can turn out to be very interesting colors.
A little about the manufacturer: the SANLU brand is a fairly well-known company that specializes in the production of plastic for 3D printers and pens, which can be used to “draw” three-dimensional figures. This is not the first time I buy plastic from them, including “silk”, and it is always of excellent quality. Plastic came in a box:
On the reverse side you can see information on all produced plastics with their printing characteristics:
The reel with plastic, as expected, is packed in a sealed bag, which also contains bags of silica gel.
The only pity is that the package does not have a reusable zip-fastener (although a simple "silk" one arrived in just such a one):
Specifications are pasted on the reel. The printing temperature range is indicated quite large from 200 to 230 degrees - there is room for experimentation:
On the “cut” of the coil, you can see that there are a lot of colors and, moreover, not only colors, but also shades change:
Weight:
The thickness of the bar is equal to the declared 1.75mm, I checked it several times during printing, there are no deviations:
Now about the features of the gradient plastic. If you think that any printed figurine will be multi-colored, then you are ... wrong :) Each changeable color of the rod has a length of about 15-20 meters, therefore, objects that require less than this length of plastic to print will be two-color at best, if , for example, the print fell on the end of the next section of the previous color, or they may even turn out to be one-color.
nine0003
The length of plastic in meters used for printing can be seen in any slicer, for example, CURA. In the photo below, I unwound about 15 meters, the lilac color smoothly, over several meters, turns into green:
print). On the other hand, even if the printed figure is small and turned out to be one-color, the one following it will definitely have a smooth transition and a different color :)
I printed on a printer with quiet motor drivers TMC2208 ANET ET4PRO (take the seller's coupon and use the promo code: I2S686DIBTNM ). You can read my detailed review of this printer here. The printer is still alive and well and prints perfectly without any modifications.
By the way, as a basis for printing, I began to glue 3M Blue Scotch on the table, and completely stopped having problems with models peeling off the table (at least for PLA and SBS plastics that I print with):
I took everyone's favorite Benchy boat as a model and increased its base size by 200%.
The model turned out to be 120x62x96mm in size. The length of the plastic for printing is 22m. Printing time: just over 5 hours. I set the layer thickness to 0.3, the speed to 60.
Based on my modest experience, SILK plastic has slightly less good adhesion of layers than just colored plastic, therefore, in terms of temperature, I advise you to take the upper recommended temperature threshold of 220-230 ° C. I have models of vases, the walls of which are made in one pass, they turn out fragile from this plastic, I continue experiments ...
Run Benchy to print and go about our business:
Printing is “purple”, but towards the end, finally, we see a smooth transition to green:
Result:
You can see the shine of the plastic and how smooth the transition turned out to be between flowers. Also, I am glad that even at a temperature close to the upper recommended value, nothing floats and there are no “snot”:
Looking at the end of the coil, we see that after green, yellow will go:
Let's take a more interesting model - a dragon.
The print parameters are the same, the estimated length of the plastic is 25 meters. Printing time about 7 hours:
Printing... Luckily, the green plastic was finished after printing the main part of the body, and then the neck, part of the wings and the head turned yellow, as if it was intended:
Close-up texture of the model:
Compared to the previous model:
Printed a small tree frog model. Print time 1 hour. The result is mono-color gold:
All three models of different colors from one coil:
If, suddenly, you think that the gradient plastic is too defiant, then you can purchase SILK plastic, for example, in the color copper:
In general, gradient PLA plastic is a very interesting thing. The models turn out to be unusual and different all the time, however, in order to reveal the full range of transitions, you need to stock up on time, because. a large model, and even with a layer thickness of 0.
