(506) 2240-6804
3D printer drag chain
▷ modular cable chain 3d models 【 STLFinder 】
Modular cable chain
thingiverse
Easy to 3d print modular cable chain. No support needed. ...Bend angle 30º (this should give about 65 mm bend diameter) For assembling use 2 mcc-inside parts, one mcc-outside-left and one mcc-outside-right For cable chain which bends in two directions...
Modular Cable Chain Redux
thingiverse
There are three STL files in the download: - Cable Chain Link Branded (Allows for full 170 degree movement) - Cable Chain Link_Restricted Movement ( limits the flex to only one direction) - Body Plug (Used to slide into the bottom of the links. ..
Smaler modular cable chain
thingiverse
I needed smaller one, so it is.
Modular Cable Chain Holder For Direct Drive (Ender 3 - Ender 3 Pro)
thingiverse
**No need to screws or nuts, plug and play** Compatible with Btt Smart Filament Sensor at side. ... *Infill=0.4* Use supports for modular base at tree mode.
Cable,cable chain,kablo taşıyıcı,modular
thingiverse
I designed this chain to reduce printing time.
I've got all the pieces horizontal. So it became more solid and beautiful looking. Modular design of the parts. Need to paste the pieces. ...Yatay baskı alarak baskı süresi aza indiriliyor.Fakat parçaları...
Cable Chain Mount for Modular X-carriage
thingiverse
Cable chain mount I designed to work with fantasmag0ria's Modular X-carriage.
Cable Chain Mount for Modular X-Carriage
thingiverse
Not so much a remix as an accessory for the Tevo Tarantula Modular X-Carriages - this will bolt flush over the top of the eccentric holes, providing a mounting pad for a cable chain without the need to modify your existing carriage, or print another.
..
Tevo Tarantula Modular X Carriage with cable chain
thingiverse
Remix of the Modular X-Carriage design to acommodate a cable chain link in the carriage. ...Get the mounts for the hotends in the original design pagehttp://www.thingiverse.com/thing:1438795 Get the links for the cable chain in...
Cable Chain Mount for Pablogk95's modular X-Carriage
thingiverse
Mount for a 20mm x 10mm Standard Cable-Chain Fotos will follow
modular chain bracelet
thingiverse
-third part is main part of chain, use it if you want connected chain already from printer.
It is loose enough, so you wont have to clean it up. -fourth part is end connector, optimized for connection with first part. It has no integrated axis so you...
modular chain bracelet
prusaprinters
I made modular bracelet system - just for fun and to learn new techniques. How to make it - for a simple bracelet - print complete chain with proper lenght, connector and pin. Every extra part measures 1cm.</p> <p>Edit2921016: Sorry people, complete...
Modular Chain link
thingiverse
This is a simple chain link that can be easily scaled to desired size and coupled with copies of itself to form a chain of any desired size and length.
...It is designed so it can be easily coupled and uncoupled by hand with negligible risk of...
Modular Chain Linkage
thingiverse
a useless chain! Caution: Pinch points, swallow hazard, yada yada, don't be stupid. ...12/12/2015: New V2 Release Print Settings Printer: Monoprice Maker Architect ...
cable chain
thingiverse
Modular unit for a cable chain. ...Dimensions on the pdf and png file.I recommend printing it with a 5% infill support, the layer fan on and a medium velocity (40 works fine)
Cable Chain
thingiverse
Cable Chain
Cable chain
thingiverse
Cable chain
Cable Chain
thingiverse
cable chain
Cable chain
thingiverse
Cable chain
Cable Chain
thingiverse
Cable Chain
Cable Chain
thingiverse
Cable Chain
cable chain
grabcad
adjustable cable chain
Cable Chain
grabcad
JN10Q120W Cable Chain
Modular Prusa X-carriage & e3D Chimera mount (layers fans, bed levelling, cable chain)
thingiverse
Design features include: - 4x LME8UU linear bearings - increased linear bearing separation - no cable ties - X-carriage belt requires no cable ties or screws - modular design components and options include: - simple Chimera mount or much more.
..
Cable chain
grabcad
Other type of cable chain
Cable Chain
myminifactory
Cable Chain for 3D-Printer.
Cable Chain
grabcad
Cable Chain & parametric polyline path
cable chain
thingiverse
cable chain for 7mm cable print with closed face down
Cable chain
thingiverse
Another design for the cable chain (width 18.
5mm)
Cable Chain
thingiverse
Open Cable Chain Easier to organize wires Use 1.75 filament to keep wires inside every cable chain
cable chain
pinshape
diseño de cable chain realizado por alumnos de la Universidad Tecnologica de Tlaxcala
Eddie Green - MendelMax 3 Cable Chains
The MendelMax 3 3D printer
3D view identifying parts of the cable chain
The MendelMax 3 3D printer
Closeup of cable chain assembly on the X axis
The MendelMax 3 3D printer
The X axis cable chain assembly at its maximum extension
The MendelMax 3 3D printer
The cable chain at its junction with the base of the printer
The MendelMax 3 3D printer
The cable chain on the left side of the printer showing its connection to the X axis
The MendelMax 3 3D printer
3D view identifying parts of the cable chain
The MendelMax 3 3D printer
3D view identifying parts of the cable chain
Image Credit: ©2022 Eddie Green
The MendelMax 3 3D printer
Closeup of cable chain assembly on the X axis
The MendelMax 3 3D printer
Closeup of cable chain assembly on the X axis
Image Credit: ©2022 Eddie Green
The MendelMax 3 3D printer
The X axis cable chain assembly at its maximum extension
The MendelMax 3 3D printer
The X axis cable chain assembly at its maximum extension
Image Credit: ©2022 Eddie Green
The MendelMax 3 3D printer
The cable chain at its junction with the base of the printer
The MendelMax 3 3D printer
The cable chain at its junction with the base of the printer
Image Credit: ©2022 Eddie Green
The MendelMax 3 3D printer
The cable chain on the left side of the printer showing its connection to the X axis
The MendelMax 3 3D printer
The cable chain on the left side of the printer showing its connection to the X axis
Image Credit: ©2022 Eddie Green
MendelMax 3 Cable ChainsSoftware
A complete package of 3D printable files, each numbered with quantities of each part. |
Includes a complete 3D model of the assembly and reference image. Note that part number 1 is a replacement for the original supplied by Makers Tool works.
Please note you will need Adobe Acrobat Reader 7.0 or later in order to ensure error-free viewing of PDF documents, including those available on this site. Download and install the latest version of the software from get.adobe.com/uk/reader. If your computer is not able to operate the latest version, previous versions that may work with your computer are available at get.adobe.com/uk/reader/otherversions.
Notice to admins and editors
Editing pages and administering the site is disabled because you are not using two-factor authentication to secure your account. This is required for all users with privileged access.
Set up Two Factor Authentication
How are 3D printing standards improving the performance of Olympic athletes?
You are here
Home
Some of the Olympic cycling teams competing in Tokyo made extensive use of 3D scanners and 3D printers to customize equipment and fit bike parts exactly to the requirements of the athletes.
The teams used 3D printers to make new bike handlebars and chains, avoiding the use of expensive tooling/moulds.
Use of 3D printing to help athletes outside the Tokyo Olympics
To be fair, 3D printing advances are being applied to other sports disciplines as well. For athletes competing in the upcoming Paralympic Games, for example, 3D printing offers an effective way to create lighter and more aerodynamic prostheses, as well as wheelchairs.
Chevrolet is now actively outfitting its INDYCAR and NASCAR race cars with 3D printed parts including oil tanks, intake manifolds and fuel tank caps. The company uses this technology both at the stage of prototyping and at the stage of final production. London-based Cavendish Imaging is using the technology to produce protective masks that allow athletes with facial injuries (such as a broken nose/cheekbone) to continue playing. Using special software, the company 3D-scans the athlete's face and creates a model, on the basis of which the individual protective mask is printed.
This innovation reduces the athlete's downtime associated with injury and prevents further injury while healing. The company's masks have already been worn by several professional football and rugby players, including former Chelsea Football Club captain John Terry and footballer Sergio Ramos. Most bicycle helmets are made of foam, which is not completely safe when dropped. HEXR has created a new type of helmet in polyamide 11 (PA 11). The product is made by 3D printing to provide maximum personalization through 3D scanning of the shape of the head and thus increase protection.
Another sport supported by the 3D printing industry is surfing. The French startup Wyve is already developing surfboards using this technology, which allows you to create personalized products with an original translucent design. The company produces boards from recycled plastic waste, offering the end user a reliable solution with optimal performance. An original way to combine sustainability and innovation in one project.
3D printing of sports shoes may soon be on the stream. More and more sporting goods manufacturers including Adidas, Nike and Reebok are using the technology in question. A prime example is the Adidas 4D Fusion sneakers. The reason for the growth in the use of 3D printing in this area is again the possibility of personalization. 3D technologies can be used to scan a consumer's foot, develop a 3D model, and print in record time. The result is footwear adapted to the morphology, needs and style of the consumer. When it comes to ski boots, skiers often have to choose between high performance and comfort: boots that are too loose, yet more comfortable, can't provide the level of control they need. Using the latest 3D printing technology, Tailored Fits has developed ski boots that combine comfort and performance. Thanks to 3D scanning technology, Tailored Fits can 3D print the inside of the boot to suit any individual, providing a direct transfer of energy. And the buckle-free design ensures free circulation, helping you feel the slopes and keep your toes cool.
The Value of 3D Printing Standards
In short, in the world of sports today, 3D printers are being used to produce a variety of objects that improve the performance of athletes: from sneakers and ski boots to surfboards and racing car parts. This technology additionally comes to the rescue in case of accidents and injuries.
International standards have played a decisive role in ensuring the reliability, efficiency and safety of 3D printers and related device components, as well as consumables used in advanced equipment in this category. A number of technical committees and subcommittees make a significant contribution to standardization work. For example, ISO / IEC STK 1, a joint technical committee of the International Electrical Commission (IEC; IEC) and the International Organization for Standardization (ISO; ISO), develops standards on the topic of 3D printing and 3D scanning , including the fundamental standards that form the basis of new documents.
In addition, a number of IEC technical committees and subcommittees are working to determine the feasibility of preparation, development and harmonization of international standards on electrical and electronic components installed inside 3D printers. Relevant parts and components include, but are not limited to, switches and relays covered by IEC/TC 17 (Switching and control gear) and TC 121 (Switching and control gear and low voltage assemblies) technical committees. Servo drives and stepper motors used to move the extrusion head of the 3D printer / sintering laser are covered by TC 2 (Rotating Equipment) standards. Power supplies for 3D printers cover papers authored by TC 9 experts6 (Transformers, reactive coils, power supplies and their combinations).
The most important components are the various types of lasers used to sinter metals and polymers. TC 76 (Optical Radiation Safety and Laser Equipment) is the leading body for the standardization of lasers, including high-power laser equipment used in industrial facilities and research centers that serve, among other things, the 3D printing industry.
Source
Tags:
3D scanners, 3D printers, Tokyo Olympics, Application of 3D printing to help athletes, 3D scanning, new type of polyamide 11 (PA 11) helmet, 3D technology, 3D technology print, sneakers Adidas 4D Fusion
Other materials:
- How 3D printing is developing the medical industry
- Additive manufacturing of molding tooling from polymer and composite materials
- Additive technologies in the system of secondary vocational and higher education
- House on a printer: developers talk about 3D printing of new buildings in St. Petersburg
- Quality is the top priority
Attention!
We accept news, articles or press releases
with links and images. [email protected]
STL file Magnetic chain to navigate scale models・Design for download and 3D printing・Cults
Share Add to ? Quality of creation: 5.
0/5 (1 vote votes)
Ratings of participants on printability, usefulness, level of detail, etc.
- 👁 2.5k views
- ♥ eight i like s
- 28 downloads
- 0 comments
- 0 makes
3D model description
Magnetic chain to move vehicles in models or dioramas, you can move cars, motorcycles, even boats.
All parts except carriages (chain links) can be printed with 0.2 mm layer and carriages with 0.1 mm layer, both with 0.4 mm nozzle.
To connect the carriages and mount the chain, join them at a 45º angle and turn several times until they are smooth. After the chain is mounted, insert it into the chain track, it may be necessary to tighten the chain, leaving part of the track not connected.
I am including a ready gcode to print on anycubic i3 Mega or similar device.
Concentric supports are recommended for carts to print correctly, otherwise they will not print correctly.
Once the circuit is assembled, it is necessary to top it with an "expensive" one, which must be made of cardboard or wood/plastic, thin and smooth on both sides and without sharp joints, otherwise the magnets will get stuck. If we are using cardboard, the magnets should be 0.5 mm thick, and if we are using wood/plastic up to 3 mm thick, we will use 1 mm thick magnets.
I recommend surrounding the walkway with 8mm wood to support the road.
Cart magnets are installed in the square area of each cart, and you can also install small round magnets to move small vehicles such as N scale motorcycles (one 3x3x3 and one 2x1 in one cart), otherwise, in ordinary vehicles use the 3x3x3 magnet in two consecutive carts.
The required motor is this one: I recommend using 15 rpm or 30 rpm.
https://www.amazon.es/gp/product/B0755DGWS8
Needed magnets: 3x3x3 for cars and 2x1mm round magnets for cars if we use a 2-3mm surface, or 1x0.5mm if we use cardboard surface:
https://www.amazon.es/gp/product/B00TACL1DO
https://www.amazon.es/gp/product/B00TACL13Y
Two rubber rings 22x14x4 mm are also needed for chain movement :
https://www.amazon.es/gp/product/B00858A92S
3D print settings
All parts except carriages (chain links) can be printed with 0.2mm layer and carriages with 0.1mm layer, both with 0.4mm nozzle.
It is very important to use concentric supports on the carriages, see the .
gcode file for an example or try to print it directly.
3D Printer File Information
- 3D Design Format : GCODE and STL Folder details close
- Loop.stl
- base_motor.stl
- carro_Q.gcode
- carro_Q_X21.gcode
- carro_Q_mod.stl
- carro_R_mod.stl
- carro_S_mod.stl
- carro_T_mod.stl
- casquillo.stl
- dentada_arrastre.stl
- dentada_arrastre_motor.
stl - kit_carro_R-S-T.gcode
- kit_motor.gcode
- kit_rail.gcode
- rail.stl
- rueda_loop.gcode
- rueda_loop.stl
- tapa_rueda_loop.stl
Find out more about
formats - Last update : 2022-09-25 09:43
- Publication date : 2022-03-25 18:49
Copyright
©
Tags
Author
designs 13
Downloads 461
Sales transactions €1,232.
26
Favorite design one Subscribers 27
Contact
Catenary post CR160
1.25 €
Scale N freezer wagon
1,25 €
Iron effect bridge for N scale model railways
2 €
Train Renfe 440 N scale (upgraded)
6.25 €
Platform wagon Scale N
1,75 €
Old water tank for model railroad
1.25 €
Anden para estación Escala N
1.25 €
Waveshare Game Hat Hand Held Console Case
3.75 €
Best 3D printer files in Game category
Deactivated
Orbiter Marble Run
2.
56 €
Wind turbine
1.25 €
Monster Hunter Trophy - Queen of the Land
10 €
The Complete War Chest and Noble Expansion Insert
Free
Carriages (compatible with rails Brio, IKEA LILLABO, Lidl Playtive)
1,35 €
Ganyu Real Gif甘雨实体表情包
Free
Nice Rhino Flexi
1.05 €
Bestsellers in the Game category
Voidwalker Exosuits Truescale
14.83 €
Heavily armored warriors Catafrac - set of limbs
1,85 €
Champion Alteyra
5.15 €
Marines EC Mk IV (now pre-supported)
10.29 €
Healer conversion kit SM
6 €
Articulated dragon
4.
11 €
Off-road vehicle
2 €
First Line Attack Troops - Truescale
5 €
Good Flexi Dragon
1.77 €
Lazy Cat
4.11 €
SPACE GNOME SQUAD
6.18 €
Snake and rattlesnake
4.11 €
Lev Fu
5.50 €
Vodfolk Explorer
10.31 €
Chopper motorcycle print-in-place
1 €
Hrafnagud and ROKSS divisions
10.31 €
Do you want to support Cults?
Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so supporting us in maintaining activities and creating future developments is very easy.
