Vinyl 3d printer

Fillamentum PVC Vinyl 3D Printing Filament

Fillamentum PVC Vinyl Filament

Fillamentum

Fillamentum ASA Series

A rugged weather-resistant material that is much more resistant to UV light.

Fillamentum ExtraFill Series

An excellent baseline PLA that prints amazingly well.

Fillamentum FlexFill Series

Flexfill is rubbery and elastic, making it impact, oil and abrasion-resistant.

Fillamentum Crystal Clear Series

An incredible line of semi-transparent, colored materials.

Fillamentum TimberFill Series

Made from a PLA base with wood particulate, Timberfill gives you 3D prints that look like they were carved from wood.

Fillamentum Vertigo Series

Vertigo PLA series reflect light and create awesome, eye-catching prints with flecks of gold, silver and blue.

Fillamentum Extrafill ABS Filament

Premium ABS Filament with a wide variety of vibrant colors.

Fillamentum PVC Vinyl Filament

Guides & Articles

How to Succeed with Quantum Dichromatic PLA Filament

Follow this guide for tips and tricks on how to get the best results when 3D printing with Quantum Dichromatic PLA filament.

How To Succeed with LayerLock SLA Build Surfaces

Successfully achieve strong bed adhesion for Laser, DLP, and SLA resin prints using LayerLock SLA Resin 3D Printing Build Surfaces.

How To Build A Successful Makerspace

Find out the necessary components to create an effective space for your maker community.

How to Succeed When 3D Printing with Polypropylene

Successfully produce 3D printed parts out of polypropylene filament with these tips on achieving stronger bed adhesion and minimizing shrinkage.

Tech Breakdown and How to Succeed: Ionic Hybrid Support Material

Supporting engineering-grade filament has been difficult without a support material dedicated to higher temperature 3D printing. Ionic aims to solve that.

How To Succeed with OBC 3D Printing Filament

From Dow Chemical, OBC combines flexible and rigid into one unique material with properties of both.

How To Succeed with LayerLock Garolite Build Surfaces

Successfully achieve strong bed adhesion for NylonX, NylonG, and standard filaments using LayerLock Garolite Build Surfaces.

How to Succeed with LayerLock Powder Coated PEI Build Plates

Powder coated PEI steel sheets are a great alternative build surface for strong bed adhesion. Here's how you can succeed using this durable build plate.

How To Succeed When 3D Printing With Nylon

Learn how to 3D print Nylon like a pro. Nylon is a stronger and more durable alternative to PLA or ABS and easy to 3D print with using these Tips and Tricks.

How To Succeed When 3D Printing With ASA Filament

Follow this step-by-step guide to learn how to print with ASA, the perfect material for any outdoor projects.

How to Succeed when 3D Printing with Polycarbonate Filament

Follow these helpful steps to start successfully printing with this extremely tough, professional grade material.

How to Succeed with NylonX

NylonX has quickly become one of our favorite filaments for strong, durable, and ready-to-use parts. Here's an in-depth look at Nylon X, and some printing tips to get the most out of this great new material.

3d Print Vinyl - Etsy.de

Etsy is no longer supporting older versions of your web browser in order to ensure that user data remains secure. Please update to the latest version.

Take full advantage of our site features by enabling JavaScript.

Find something memorable, join a community doing good.

(1,000+ relevant results)

First 3D printed modular turntable built, DIY kit planned for mass production

The Dutch manufacturer of 3D printers RepRapUniverse and the Swiss company Lenco, which creates turntables, decided to please fans of the archaic with another electrophone. Unlike other companies that duplicate devices from the good old 70s and 80s, the tandem of manufacturers intends to launch a DIY kit into a series. It will allow everyone to assemble the Lenco-MD turntable with their own hands, having previously printed most of the parts on a 3D printer.

A working prototype of the turntable was presented at the IFA 2018 Consumer Electronics Faire in Berlin. A kickstarter campaign was launched to support the project, and likely to explore global demand. Under the cut, a few words about what the electrophone promises to be for self-printing and assembly, and what has already been implemented in the prototype.

What was shown in Berlin?

The Lenco-MD prototype, shown at IFA 2018, is a turntable assembled from a set of components and parts printed on a 3D printer and equipped with a tonearm. Due to the fact that the modules for the electrophone are still being developed, it was shown in a standard wired version.

The turntable is equipped with a belt drive, which the manufacturers claim provides smooth movement, an original design arm with an AT3600 cartridge from Audio-Technica.

The table is mounted on special damping feet.

In the basic configuration of the prototype there is also a built-in preamplifier (phono stage) with headphone output and RCA.

At the demonstration of the project in Berlin, representatives of the manufacturers noted that it was a “green” project. The main parts of the player's construction are made of PLA, a biodegradable thermoplastic that does not harm the environment. It is planned to use renewable energy sources for food.

The latter is popular as a reliable and stable device. All components used in the Lenco-MD have already been tested with the serial Lenco L-85 turntable.

The 3D printer used to print the prototype and the player that formed the basis of the development

The assembly of Lenco-MD deserves special mention, which, according to the assurances of the developers, takes only a few minutes.

quick assembly process

The

Lenco-MD solar-powered wireless turntable promises to be the world's first turntable that can literally be printed at home and assembled using a few additional parts that come with the kit (motor, belt, cartridge, etc.). The device assumes a quick replacement of modules and the possibility of individualizing the design.

Now it is planned to implement a module with a small amplifier and speakers, a Bluetooth module, a module with a solar battery. Each of them will be sold separately.

It will be possible to change almost everything in the player (tonram, cartridge, phono stage, etc.)

There is a way out of this situation - buy a partially or completely printed set of parts. Manufacturers rightly reasoned that not everyone has 3D printers or the size of a home 3D printer does not match the size of the parts. There are several options for basic kits, for those who have a small 3D printer - partial and for those who do not have one at all - full.

Moreover, those wishing to assemble Lenco-MD are offered to buy ready-made spare parts for small-scale screwdriver assembly. With a strong desire and sufficient demand, you can turn a hobby into a business. Lenco's flexible policy encourages electronics manufacturers to create modules for the turntable, effectively opening up opportunities for expanding functionality.

As a conclusion

A relatively recent Kickstarter campaign has already collected more than half of the required amount of $56,000 for this niche project. This may indicate that the idea is in demand and the developments are likely to be promising. The creators of Lenco-MD hope that the idea will become a trend, and the “skillful vinylophile” DIY turntable set will be in great demand. With the ongoing demand for turntables, the rise in demand for DIY products, the popularity of 3D printing and green technology, there's a good chance their idea will really take off. I will traditionally be grateful for your opinions about the project in the comments. Write if this project can take off and why.

Source

Dutch 3D printer manufacturer RepRapUniverse, Swiss company Lenco, Lenco-MD turntable, 3D printer, IFA 2018 Consumer Electronics Faire in Berlin

Vinyl record filament.

Consumables

Subscribe to the author

Don't want

Hi Friends!

Remember, vinyl is not to be trifled with! If possible, you should not experiment with melting this material at all.

Today I will try to print from vinyl records. I can imagine how dissatisfied fans of vinyl records will be. I have a lot of this stuff. I will donate 5 pieces for the sake of the experiment.

I didn't expect the heads to be so flexible. The label can not be torn off the plate, pasted on the Soviet glue. It remains only to cut out this pasted circle. It was possible to shove the entire record into the grinder.

The shredder looks like it was designed to shred vinyl records. For further grinding, I will use the Chinese saucepan that you saw in past videos. I grind the material with a respirator, being afraid that small particles of the material can fly in the air.

Vinyl cured to dust, just a little check on a Chinese extruder. To begin with, I will set the temperature on the extruder to 180 degrees so that the previous test polymer comes out, after which I will lower the temperature.

It's hot! I didn't expect vinyl to be so malleable. The filament is even. I believe that the finer the material is crushed, the more stable the filament is. There are slight deviations, but it's not terrible. I have seen factory filament with much larger deviations. I thought that the filament would turn out to be brittle, but it was not there. It turned out a very elastic and durable thread.

Now is the time to print the test disk. Instead of glue, I print the first layer of PLA plastic and then change the filament to the test one. It's a miracle that I started printing the first time. Nozzle temperature 245°, table 60° nozzle diameter 0.8mm., Z step 0.20mm. Of course with a nozzle diameter of 0.4mm. the tested part would have turned out much more attractive. I'm printing these discs to see if it's possible to print with the tested plastics.

Next I want to test the spiral print. It has already become a tradition. Previous samples I printed from car headlights, PVC windows, audio tape. At first, of course, I was a little upset that such a low-quality print was obtained.

I looked closely and noticed that the previous layers do not have time to cool. Most likely for printing with this polymer you need a good airflow. Unfortunately, there was no airflow on the printer on which I am testing. Will have to make from improvised materials. Blowing solved the problem.

You will not find such a filament in the store. When heated, gas vapors are poisonous. Heating above 80° is already dangerous. I read that vinyl has a sweetish taste when heated, which of course I felt myself in the workshop. I use protective equipment and I turn on the ventilation at full capacity.

Finally, as always, you need something for yourself. Without hesitation, the idea arose to print a mount for goggles. These glasses are constantly lying around the room, more than once I broke stepping on them. We need to make sure they are in the same place.

If you want, I will upload this model for download, but I think you can easily develop such a simple detail yourself.

You can create things out of vinyl, I don't think it's necessary. Vinyl records are already valuable. And take care of your health.

God bless you! See you!

vinyl

Subscribe to the author

Don't want

Even more interesting articles

Sergey

11/25/2022

2752

Subscribe to the author

Don't want

After reading several reviews from Ilya and Alexander on the budget composite rPETG GF from REC, I decided to personally.

Vinyl 3d printer

Fillamentum PVC Vinyl 3D Printing Filament

3d Print Vinyl - Etsy.de

Find something memorable, join a community doing good.

First 3D printed modular turntable built, DIY kit planned for mass production

What was shown in Berlin?

The

As a conclusion

Vinyl record filament.

Subscribe to the author

Subscribe to the author

Even more interesting articles

Subscribe to the author

Learn more