Pocket operator 3d printed case

▷ pocket operator case 3d models 【 STLFinder 】

Pocket Operator Case

thingiverse

A remake of "Pocket Operator Case (OP-1 Style Keypad)" by justinkowski. I changed the style of the buttons and add some minor improvement to better allocate the operator into the case especially when with the hanger still on. ...

Minimalist Pocket Operator Case

thingiverse

(It fits my PO-33 and PO-20) Almost all features of the pocket operators work with the case. The top hanger can be left on or taken off, the input and output jacks are accessible, the wire stand is fully functional, there is a space for the. ..

Pocket Operator Case

prusaprinters

Case for Teenage Engineering's Pocket Operator. This case is compatible with the wire folding stand, and the loop at the top doesn't need to be removed. All LEDs shine through a small hole above each button, and there is a hole to allow the use of...

Pocket Operator Case

thingiverse

This is a case for the Pocket Operator series of synthesizers made by Teenage Engineering. Its main features are: Keys move freely LEDs are still visible Audio sockets accessible with standard sized rubberized jacks Possible to keep the break-away...

Pocket Operator Case

cults3d

Pocket Operator Case

prusaprinters

(Thing 3039287) Update (June 2nd 2019) Added Button Customizer (Thing 3668411) Print instructionsCategory: Audio Summary This is a case for the Pocket Operator series of synthesizers made by Teenage Engineering. Its main features are: Keys move...

Pocket Operator Case Remix

thingiverse

Leave the connectors of the buttons on when putting in the case. I noticed when you take of the frontcase from the plate, if it is still warm it could bend near the screen frame, this makes it look like it is hitting something from the inside and. ..

Teenage Engineering Pocket Operator Case

thingiverse

Designed a slide-over case for my PO-20. ... Cutouts for the knobs and batteries, but protects the buttons from constantly turning on in your pocket.

Pocket Operator case with buttons

thingiverse

I remixed the Pocket Operator case to add buttons to it and reinforce the case with places for 4 screws to hold it together. ...It takes 4 - 2.5M x 12mm screws (self tapping).

Pocket Operator case with buttons

prusaprinters

I remixed the Pocket Operator case to add buttons to it and reinforce the case with places for 4 screws to hold it together. ...It takes 4 - 2.5M x 12mm screws (self tapping).</p> Category: Audio

The co-operator pocket operator case

thingiverse

***Updated back plate 25/09/21*** Designed a simple two part PO case, while trying to retain as much of the original style as possible. Features: Keep the metal stand Keep the snap off hanger Access the original buttons for tactile response...

(PO) Pocket Operator Case, Travel Case

thingiverse

This is a travel case for the pocket operators by teenage engineering. Specifically designed to work with the nice minimalistic case by "The Case" : https://www. thingiverse.com/thing:5317194 I used a personal logo for my version which I photographed....

Pocket Operator Simple Case

thingiverse

This is a simple case for the "Pocket Operators". You can store a short cable inside it and the operating manual. Have fun ! ...:) www.3Dsection.de

Pocket Operator Calculator Case

thingiverse

A case for the Teenage Engineering Pocket Operator series https://teenage.engineering/products/po Compatible with or without detachable hanger. Depending on printer precision, it may be necessary to rearrange buttons for best fit. ... Feedback is...

pocket operator slim case

thingiverse

This is case for the pocket operator that contains microphone. Following are the features for my model. LED lights are visible. Don’t need to harm the hanger. Wire stand is still available to use. Designed to use snap fit for assemble. I...

Pocket Operator bumper case

thingiverse

Protect your Pocket Operator and make it easier to hold with this sleek two-piece case. It accommodates most plugs for the line-level audio jacks. If not, you can simply remove the top part of the case to facilitate cable ingress. The case does not...

Pocket Operator Back Case

thingiverse

This is a slip on back case for pocket operators that have the silicon case. There are two versions one for the 10 series and one for the 20 series. ...The 1/8 TRS jacks are slightly offset between the 10 and 20 series.

Pocket Operator Cover Case

thingiverse

I made it because I wanted to be able to store my pocket operator in a way that is completely enclosed. This comes with two options of a lid. One version has a tolerance of .4mm, the other has a tolerance of .2mm. Printed at the lowest resolution on...

Pocket Operator Slim Case

thingiverse

This is case for the pocket operator that contains microphone. Following are the features for my model. - LED lights are visible. - Don’t need to harm the hanger. - Wire stand is still available to use. - Designed to use snap fit for...

Pocket Operator bumper case

prusaprinters

If not, you can simply remove the top part of the case to facilitate cable ingress. The case does not require any hardware to assemble, though after printing you will need to spend some time carefully removing supports from the PCB grooves around the...

Pocket Operator Case w/ Space Invaders Lid

thingiverse

I wanted a custom lid for the PO-20 case, so I changed the 'arcade' text from the original build to a space invaders sprite. ...Love the build, definitely go check it out for your pocket operator.

Numbered buttons for Pocket Operator case

thingiverse

... ...Compatible with the Pocket Operator case: http://www.thingiverse.com/thing:1375818 The "v4" version are the same buttons as included with the Pocket Operator case. The "v4wide" version of the buttons has a larger diameter (0.5 mm) and less fillet.

Numbered buttons for Pocket Operator case

cults3d

Compatible with the Pocket Operator case The "v4" version are the same buttons as included with the Pocket Operator case. The "v4wide" version of the buttons has a larger diameter (0.5 mm) and less fillet. Depending on your printer these may not be...

Pocket Operator Case Buttons with "light guide"

thingiverse

This is a fantastic Pocket Operator case, but led visibility is a problem. So I tried to design a button with a prong that fits into the case holes hoping that it could carry out some of the light. I printed buttons in transparent PLA. Well... ...it...

Numbered buttons for Pocket Operator case

prusaprinters

... ...Compatible with the Pocket Operator case: http://www. thingiverse.com/thing:1375818 The "v4" version are the same buttons as included with the Pocket Operator case. The "v4wide" version of the buttons has a larger diameter (0.5 mm) and less fillet.

Light guides for Pocket Operator case

cults3d

Light guides for Pocket Operator case The video shows the light guides (printed by shapeways) in action. These have not been tested for FDM printing! If you have some transparent filament, a good printer and want to try - please post your results!

Light guides for Pocket Operator case

thingiverse

Light guides for Pocket Operator case: http://www. thingiverse.com/thing:1375818 The video shows the light guides (printed by shapeways) in action. These have not been tested for FDM printing! If you have some transparent filament, a good printer and...

One-Piece Ninjaflex Pocket Operator Case

thingiverse

After removing the interior supports with pliers, the whole case can be stretched over the Pocket Operator. It tries to be flexible enough to achieve a good button feel while being rigid enough to protect the Pocket Operator in a pocket. I think the...

Light guides for Pocket Operator case

prusaprinters

Pocket Operator Case (OP-1 Style Keypad)

thingiverse

This is a case for the [Pocket Operator](https://www.teenageengineering.com/products/po) synthesizer series from Teenage Engineering. It offers a sleek look similar to the TE silicone covers, with the added protection of a hard case. **FEATURES:** *...

Free STL file Pocket Operator Case・3D print design to download・Cults

Floppy Dragonfly

Free

IKEA Koppla power strip mounting brackets

Free

Door Opener Simple

Free

Realistic garden snail

Free

Porygon Pokemon

Free

Piston Cup Trophy

Free

Hollow Knight - Hornet

Free

Door Opener Advance

Free

Best 3D printer files of the Gadget category

Shox Bat Beat Box

Free

Pumpkin Ball (No Supports, Snaps Together No Glue Required)

€1. 88

Single hand Joy-Con adapter (Right)

Free

Champagne Cork Rocketship

~~€0.99~~ -20% €0.79

Rocking Smartphone Stand

Free

Deactivated

TINYWHOOV V5 - 3d print file

Free

Heavy Gun Walker

€9.41

Best sellers of the category Gadget

ELEPHANT PIGGY BANK - NO PAINTING REQUIRED

€5

V8 engine print in place

~~€1.76~~ -50% €0. 88

Bambu AMS Colour 2 Tier Stand (for 2 AMS Units 1 Above 1 Below)

€2.29

Survival Arrow Gun

€6.39

Karambit keychain spinner tiktok keyrambit NO BEARING

~~€1.71~~ -10% €1.54

App to turn your photo into 10 types of decoration

€3.50

Mechanical Spinning Top Dice Box

€3.72

App to create switchable business cards

€3.50

Italian hand

€1

App to create keychains

€3.50

DJI AVATA GoPro Mount

€2. 50

F18 SUPER HORNET - 50 MM EDF JET [RC PLANE]

€11.76

G17 Brutus frame

€6.50

AR-15 LOWER MULTI CAL. REINFORCED STRUCTURE

€8.50

App to create dual text illusion

€3.50

JEEP WRANGLER PEN HOLDER - 3-IN-1

€1.82

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.
DONATE: If you want, you can make a donation via PayPal.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

STL file Teenage Engineering PO-33 Operator pocket bag・Model for download and 3D printing・Cults

DELL E5470 NVMe Bracket

3.43 €

Dell Precision T3600 Network Storage Enclosure

3.43 €

Armattan Badger HD/ TBS Analog

3.43 €

nine0003 Armattan Marmotte DJI FPV Digital System 30.5x30.5mm

3.43 €

Accessories TBS Source Two

3. 43 €

DYI FPV Portable Screen (Eachine VR006, Eachine ProDVR, TBS Tango2)

3.43 €

Tiny Whoop LED Gate + Arduino/ESP32 LED Driver Dual 18650 Power Bank

3.43 €

nine0003 FPV Flag - DYI IC Driven LED Module powered by 18650 battery fits T8LED16 Wall Light

3,43 €

Best 3D Printer Files in the Gadget Category

GoPro Polyhedron Stand

Free

DIY custom adapter for GoPro

2 €

COOKIE CUTTER COOKIE CUTTER WITH STAMP JUNGLE ANIMALS JUNGLE ANIMALS

€4.38

Kriss vector handguard

28.23 €

Zip tie GoPro Curved Mount

Free

iPad Camera Kit

Free

Steampunk Oculus Roboticus

Free

Bestsellers in the Gadget category nine0037

Frame G17 Brutus

6,50 €

Owl - wall key holder

1. 86 €

CYLINDER WALL/PISTON 2-STROKE

0,90 €

Karambit keychain spinner tiktok keyrambit NO BEARING

~~€1.71 nine0087 -10% 1.54 €~~

Kinetic floating Christmas tree

1.89 €

Application for cutting cookies

3.50 €

MECHANICAL CHRISTMAS GIFT BOX

~~€3.15~~ -fifty% 1.57€

Mount for GoPro DJI AVATA

2,50 €

ENGINE BLOCK - WALL KEY HANGER

1,82 €

Keyfob application

€3. 50

G26 frame DD26 - super reinforced

7 €

nine0003 BARABA crossbow pistol with aluminum profile core

10 €

JEEP WRANGLER PEN HOLDER - 3-IN-1

1.82 €

Air motor, printed, fully assembled, ready to use

3.11 €

Application for creating switchable business cards

3.50 €

wall key holder (dragon ball)

1.25 €

Do you want to support Cults?

Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so supporting us in maintaining activities and creating future developments is very easy. Here are 4 solutions available to everyone:

AD: Disable the AdBlock banner blocker and click on our banner ads.
AFFILIATION: Shop online with our affiliate links here Amazon.
DONATIONS: If you want, you can donate via PayPal here.
* INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community! nine0006

STL file Operator pocket case・3D printing template for download・Cults

Seal in place Medusa with movable tentacles (without support)

1,50 €

Telescopic chess set (printed on site)

6 €

Mini Jellyfish Air Plant holder Set (SLA)

1 €

nine0003 Squid Air Plant Holder (FDM & SLA)

1 €

Modern Chess Set (high-res, SLA, whole set)

6 €

Micro control cases: for micro SD cards and other miniature items

1 €

Box with notched hinges (thin)

1 €

Cactus Piggy Bank

1. 50 €

Best 3D Printer Files in the Gadget Category

DEER DECORATION

2.40 €

Mini cord spool

0.94 €

FLOOR CARNIVORA REGADIO

Free

nine0003 KEY RING WITH DOG PRINT

~~€2.99~~ -fifty% 1.49 €

bike / motorcycle cell phone holder

4 €

Playmobil Ghostbusters spengler wand

Free

Poor man's chrysalis

4 €

Bestsellers in the Gadget category

Dice box with mechanical rotating top

3. 72 €

Application for cutting cookies

3.50 €

wall key holder (dragon ball)

1.25 €

JEEP WRANGLER PEN HOLDER - 3-IN-1

1.82 €

BARABA crossbow pistol with aluminum profile core

10 €

Frame G17 Brutus

6,50 €

Application for creating a double text illusion

3,50 €

Keyfob application

€3.50

nine0003 Mount for GoPro DJI AVATA

2,50 €

The Thing - charging stand for Airpod and Apple Watch

14.11 €

ELEPHANT PINK - NO PAINTING

5 €

G17- DD17 Frame with rails

7. 50 €

Air motor, printed fully assembled, ready to use

3.11 €

Application to turn your photo into 10 types of jewelry

3,50 €

MECHANICAL CHRISTMAS GIFT BOX

~~€3.15~~ -fifty% 1.57 €

Italian hand

1 €

Do you want to support Cults?

AD: Disable your AdBlock banner blocker and click on our banner ads.
Learn more