Home » Misc » Ltt 3d printer

Ltt 3d printer


More than 55.000 shields produced by our factory and results of disinfection tests with live coronavirus

More than 55.000 shields produced by our factory and results of disinfection tests with live coronavirus

This article is also available in following languages:

April 9. 2020

Estimated reading time: 2 minutes

More than 55.000 protective face shields 3D printed in less than three weeks by our factory alone! Take a look at the gallery of Czech first responders using our shields (on the Czech version of our website only, but this is mostly about photos so I hope you don’t mind). And we have some tips for you about how you can help too. What started as our local initiative to print protective face shields has turned into a massive endeavor driven by 3D printing communities worldwide. Tens of thousands of people began to print protective face shields using the design we have made available, helping hundreds of thousands of frontline staff – doctors, firefighters, police officers, social workers and many other brave people who risk their lives every day in these difficult times. Our design files at PrusaPrinters.org reached over 250.000 downloads and maker communities became a trending topic in media across the world.

It’s an incredible collaborative effort that goes far beyond anything that 3D printing communities have ever accomplished. This is not just about printing a lot of parts, it’s about management, planning, cooperation, collection, and distribution. Far more than one could imagine. There’s so much good work being done and we’re incredibly proud of the entire 3D printing community. The complexity of the situation and the importance of 3D printing of PPE is perfectly summarized by our friend Destin Sandlin from Smarter Every Day – definitely worth the watch!

We’re doing our best to help where we can. Our in-house production of protective shields in the Czech Republic has been running for two weeks straight and we managed to donate 55.000 shields to doctors and many other professionals in need. And since we’re aware of the challenges that many of you must overcome, we decided to summarize our findings and other important information at prusa3d.com/covid19 – this also includes vital information about disinfection. We asked leading Czech hospitals and laboratories to test various disinfecting methods, so we could share reliable and conclusive data. At prusa3d.com/covid19, there’s also a dedicated community section highlighting some of the groups that joined the cause. If you wish to be listed there, please let us know.

So, once again: thank you, everyone, who joined the cause. Please, stay strong and stay safe. We can get through this together and I hope I will be able to write the next big update in somewhat happier times.

PS: Just when I’m finishing this short update, Linus Tech Tips has also released a video about printing protective face shields. Wow! I’m so glad we can work with such great people on this good thing. Thank you!

Previous post Next post

Screwdriver best 3D printing models・Cults

WOWSTICK STAND

€2.50

Ratschendreher Reparatur

Free

Makita Battery wall holder

€2.06

Bosch cordless screwdriver

€0.99

Stubby Screwdriver

Free

Kart tyre screwdriver

€3. 91

Screwdriver 3D Model

€13.76

ifixit Case Insert - Bitholder

Free

Spool rotaty holder

Free

Screwdriver keychain

Free

Facom screwdriver holder

€2

Kenner Vintage Vehicle Maintenance Energizer 8 Tools

€4

Screwdriver Bic

€0.98

Helicopter Assembly Toy

€1.25

Sonic Screw Driver Ver2

Free

Doctor Who Style Sonic Screwdriver Ballpoint Pen

€5 -50% €2. 50

Bosch GSR 12V 10.8 IXO Makita Einhell TC-CT 3.6 Li Tool Holder for MultiClip

Free

Moser 1400 hair clipper adjustment key

Free

Hex bit case - Dark_Sarmat Edition (80 pcs)

Free

SCREWDRIVER WITH SMALL INTERCHANGEABLE BITS

Free

Adapter for 1/4 inch (6.35mm) to 4 mm bits for an electronic screwdriver

Free

screwdriver container

€0.76

[v2] XIOAMI MI WOWSTICK SCREWDRIVER 1F+ FULL CASE version 2

€1.50

LTT Screwdriver Bit Holder

Free

Screwdriver bits box

€1

SCREWDRIVER AND BITS HOLDER (Compact Version)

€1. 50

Screwdriver and bits holder

€2

Screwdriver holder

Free

Screwdriver holder

Free

Wera Micro Screwdriver Pegboard holder

Free

Peg Board Wera Screwdriver Holder

Free

Screwdriver handle

Free

WOWStick box

Free

# Screwdriver Organizer (Wera Hex only)

Free

SCREWDRIVER SUPPORT

€3.99

Toolkit 3D Model Collection

€28.67

Toothed wheel

€1.60

*** HILTI B22 BATTERY HOLDER *** 22V

€1. 50 -50% €0.75

ScrewDriver Bit Holder

Free

Screwdriver stand

€3.20

Ikea Skadis Hex Bit Holder

Free

Low profile Skadis Micro/Mini/Jewelers Screw Driver Adapters

Free

Screw driver holder

Free

Vref plastic screwdriver - prevents short circuits

Free

screw 20 mm

Free

screw 18 cm+

Free

U screw 100 mm 150 mm +

Free

Ratchet to Drive Bit Adapter

Free

3D printers for construction in Cheboksary

  1. Home
  2. Sale
  3. Machining centers and CNC machines
  4. Construction 3D printer

You can quickly compare the prices of 3D printer for construction and choose the best options from more than 39 offers

3D fiber laser cutting machine robot

0018 Voltmash (Russia)

In stock

3D fiber laser metal cutting robot is suitable for cutting metal products of complex shape, can be used for processing automotive sheet metal, kitchen utensils,. ..

19.04.2022 Cheboksary (Russia)

Printing factory Epson L1300 - A3+ four-color printer

Condition: used Year: 2021 Manufacturer: EPSON (Japan)

Epson L1300 is a four-color A3+ printer with a record low cost of printing. It is great for those who want economical printing of documents, color images, reports,...

10/17/2022 Cheboksary (Russia)

55,000

LTT-6090 JigWei CNC Router

Condition: New Year: 2014

Available

Designed for high-quality milling and engraving of surfaces of parts and blanks in a plane (2D software) and in 3-dimensional space (3D...

05/22/2017 Cheboksary (Russia)

250,000

rolling machine for the production of profiled sheeting C8

Condition: Used

I sell a rolling machine for the production of corrugated board C8. The purchase of equipment will allow you to become a supplier of the popular construction material and confidently occupy its niche in the market. If...

08/25/2016 Cheboksary (Russia)

365 400

Two-transformer substation 2KTP

Condition: New Year of issue: 2017 Manufacturer: Energy (Russia)

Two-transformer substation (2KTP) designed for receiving, transit, converting and distributing electrical energy of three-phase alternating current with a voltage of 6-10 / 0.4 kV with a frequency of 50 ...

02/21/2017 Cheboksary (Russia)

285,000

Block-modular substation BMKTP

Status: New Year of issue: 2017 Manufacturer: Energia (Russia)

Block-modular substations designed for receiving, transit, converting and distributing electrical energy of three-phase alternating current with a voltage of 6-10 / 0. 4 kV with a frequency of 50 Hz.KTPBM...

21.02.2017 Cheboksary (Russia)

380,000

Prefabricated chambers of one-sided maintenance of the KSO 9 series0014

Condition: New Year of issue: 2017 Manufacturer: Energia (Russia)

Prefabricated chambers for one-sided maintenance of the KSO-299, KSO-299M, KSO-398, KSO-399 series One-way maintenance chambers of the KSO-399 series 299, KSO-299M, KSO-398, KSO-399 are designed to receive and...

21.02.2017 Cheboksary (Russia)

47 500

05/22/2017 Cheboksary (Russia)

7 990

Automatical outskirts Woodtec Forward 400 EVO

Status: New Manufacturer: Woodtec. /max10 - 60 mmWorkpiece dimensions (min) - length x width120 x 60 mm Feed speed 6-20 m/min Power of crosscut motors (2 pcs) 2...

07/14/2017 Cheboksary (Russia)

22 960

CNC WoodTec MH 6090

CNC CNC: New Manufacturer: Woodtec

Destructible. Preferences in the availability of

performing milling work in 2D and 3D space. In engraving and wood carving, various industries...

07/14/2017 Cheboksary (Russia)

4 760

CNC Woodtec MH 1212

CNC CONSTRUCTION CONDITION: NEW Manufacturer: Woodtec

In the availability of

0 1220 mm. Aluminum table with T-slots Spindle - 3.7 kW (0-18,000 rpm) air-cooled Manual tool change (collet ER25, locking...

07/14/2017 Cheboksary (Russia)

6 230

CNC WoodTec MH 1325

CNC CNT CONDITION: New Manufacturer: Woodtec

Prescribing to the costs of the Strike. performing milling work in 2D and 3D space. In engraving and wood carving, various industries...

07/14/2017 Cheboksary (Russia)

8 900

CNC Woodtec VH 1325

CNC CONSTRUCTION STATE: New Manufacturer: Woodtec

Prescribing to the costs of the Strike. performing milling work in 2D and 3D space. In engraving and woodcarving, various industries...

07/14/2017 Cheboksary (Russia)

10 890

CNC WoodTec VR 1325

CNC CNT CONDITION: New Manufacturer: Woodtec

The Assignment Prescription: Purpose of the Standards of the Strong performing milling work in 2D and 3D space. In engraving and woodcarving, various industries...

07/14/2017 Cheboksary (Russia)

1330

CNC milling machine with a semiautomatic change of tool Woodtec VP 1325

Status: New Manufacturer: Woodtec

in the presence the machine has long been used to perform milling work in 2D and 3D space. In engraving and woodcarving, various industries...

07/14/2017 Cheboksary (Russia)

16 390

CNC WoodTec VH 2030 930

CNC CONSTRUCTION STATE: New Manufacturer: Woodtec

Prescribing to the cost of

performing milling work in 2D and 3D space. In engraving and woodcarving, various industries...

07/14/2017 Cheboksary (Russia)

17 390

Popular categories in Cheboksary

By the way, on the ProMachine portal, the choice of offers for a 3D printer for construction is almost like on Avito and TIU

Video of a 3D printer for construction

4 KBA 90 4 + LTT SW – 4 + L ALV Offset press Used equipment
  • Description
  • Detailed information
  • About this seller

KBA Rapida 106-4 + LTT SW - 4 + L ALV
Ink supply
Fully Automatic Plate Changer (FAPC)
Coater with doctor blade system x2
SIS-Sensoric feed system
Drivetronic SPC (simultaneous plate change)
DensiTronic Professional
Plate ID
ErgoTronic ColorControl wall screen
QualiTronic ColorControl
LogoTronic Professional
deck dryer with TT4 IR light deck40 Feeder table with suction tape
Cooling and recirculation Baldwin Combiliner + IpaSonic
Refinement 8:0/4:4 (SW7)
VariDry IR and UV dryer
Impression cylinder washer - automatic
Ink roller washer - automatic
Blanket washer - automatic
Extended delivery ALV3
High pile delivery
Grafix powder suction
Grafix PowderMaX
Detection double sheets - electronic
Central fresh air cabinet Becker VariaiR
DriveTronic feeder
93 MILLION PRINTS

This description can be translated automatically. Please contact us for more information. The information in this announcement is for guidance only. Exapro recommends that you check with the seller before buying a machine.

Number of colors 8
Max. paper length 74cm
Max. paper width 106cm
Copies 93 Mio
Duplex Yes
Dryer IR
Coating block Yes
-------------------
Operating hours
Switching hours
Condition good condition
CE mark ---------
Status

Customer type Dealer
Active with 2009
Offers online 21
Last activity November 10, 2022

Description

KBA Rapida 106-4 + LTT SW - 4 + L ALV
Ink supply
Fully automatic plate changer (FAPC)
Coater with doctor blade system x2
SIS-Sensoric supply system
Drivetronic SPC (simultaneous plate change)
DensiTronic Professional
Plate ID
ErgoTronic ColorControl wall screen
QualiTronic ColorControl
LogoTronic Professional
TT IR Interdeck Dryer
Feeder Table with Suction Tape
Cooling and Recirculation Baldwin Combiliner + IpaSonic
Refinement 8:0/4:4 (SW7)
VariDry IR and UV Dryer
Impression Roller Washer - Automatic
Ink Roller Washer - Automatic
Blanket Washer - Automatic
ALV3 Extended Delivery
High Speed ​​Delivery fluff
Grafix powder suction
Grafix PowderMaX powder atomizer
Double sheet detection - electronic
Becker VariaiR central air cabinet
DriveTronic feeder
93 MILLION PRINTS

This description can be translated automatically.

Learn more