Fastest industrial 3d printer

7 Fastest 3D Printers 2022 In Every Price Range

One of the major gripes with 3D printing is many consider it to be slow. However, over time both the speeds of FDM and resin printers have crept up — and there are now some super-fast options for both technologies.

For industrial printing, there are printers now reaching speeds competitive with traditional manufacturing, aiming to displace injection molding.

But what are the other fastest 3D printers in the world?

We have listed the world’s fastest 3D printers in every price range below, for both FDM and resin printers – but first, let’s explain the factors that affect the speed of 3D printing.

Do Bigger 3D Printers Print Faster?

A bigger resin 3D printer does indeed print faster, but this is more in the sense of being more productive. A resin printer cures an entire layer on the XY axes, regardless of size, in one go. This means that the larger the printer, the more productive the printer is.

However, this isn’t the case for FDM printers, which need to deposit filament across the entire layer before moving on to the next.

FAST FDM PICK

200mm/s makes it one of the fastest FDM printers around

Comes 95% pre-assembled

Available at Amazon here

FAST RESIN PICK

Super-fast 100mm/h speed

Larger resin build area for scalable minis prints or larger resin models

Available at Anycubic here Amazon here

SUPER-FAST PICK

Extremely high-res 8K LCD screen

Enormous build area and 70mm/h speed

Available At Phrozen here Amazon here

How Fast is a 3D Printer?

As for the technologies and 3D printers we have now, simply stating the fastest possible 3D printing speeds is difficult.

That’s because – and I know it’s frustrating to read this – it depends on several factors:

Resolution of the 3D printed part: before you start printing, you need to slice your model into layers on a 3D slicer. The more layers, and the thinner each layer, the longer the part will take to print at the same speed. A part printed with 50-micron layers will have twice as many layers as the same part printed with 100-micron layers, and take twice as long at the same speed.

• We also have a guide to high resolution 3D printers.

Quality of print: theoretically you could run a budget 3D printer at an extremely high speed, and it would still print. But the results wouldn’t be anything like how it looked on your slicer. It would be a mess of filament hairs and blobs, because the speed settings were set too fast. Some 3D printers can handle high-speed 3D printing, some cannot.

3D printing technology: how fast a 3D printer prints depends on the technology. Resin 3D printers are significantly faster than FDM 3D printers as they can cure entire layers at once, rather than depositing filament over each part of the layer. The fastest 3D printing technologies include Multi Jet Fusion and resin 3D printing technologies like MSLA.Resin 3D printing technologies are known for being faster than FDM.

Material: some materials are easier to print than others, putting less demand on the printer and leading to a slightly faster print.

Complexity of the model: You will be able to print a cube block far quicker than an intricate 3D printed jewelry piece. This is because you can print larger layers and at a faster print speed without a notable loss of quality, since the cube is a very simple shape with no details.

Size of print: fairly obvious, but a larger print will take far longer than a small one. A full-size vase will take around 12 hours to print in normal detail on most FDM 3D printers, but a small statue may take under an hour.

Nozzle size: for FDM 3D printing, smaller nozzles mean more intricate details can be printed more accurately, but larger nozzles can potentially print faster.

Will 3D printers get faster?

Almost certainly. We’ve already seen a number of major innovations that make 3D printers faster in the last decade. In 2012, the first delta 3D printers started to appear, which print significantly faster than previous Cartesian 3D printers.

Then, new resin 3D printer innovations such as Carbon 3D’s CLIP, and Uniz’s UDP technologies made SLA and DLP faster. Other significant speed innovations include HP’s Multi Jet Fusion technology, and also the huge advances being made in many metal 3D printers such as those by Desktop Metal and Markforged.

The Fastest 3D printers 2022 in Every Price Range

3DSourced is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Flsun Super Racer – Fastest FDM 3D Printer Under $500

• Price — Check latest price at Amazon here
• Technology: FDM Delta
• Max Print Speed: 200 mm/h
• Build Volume: 260 x 260 x 330 mm

True to its speedy name, the Flsun Super Racer is a Delta FDM printer that absolutely gallops with a top print speed of 200 mm/h. It’s an upgraded version of Flsun’s QQ-S, which after some one-on-one time we found to be a competent, worthwhile printer for large projects.

Delta printers are known for offering higher speeds than their Cartesian brothers, but Flsun is pushing the boat out to new extremes with the Super Racer. Most standard FDM printers perform best at a comfortable 50-60 mm/h, while the Super Racer delivers solid quality prints at four times that.

With a decently-sized 260 x 260 x 330 mm build volume, the Super Racer is also big on vertical print capacity, ideal for those towering prints that exceed the dimensions of budget FDM printers. Throw in a thoughtful design, quality components, automatic bed leveling, breezy 20-minute assembly, a responsive, easy-to-navigate detachable touch screen, and the Super Racer comes awfully close to a speed freak’s dream 3D printer.

Now, all this speed does come with a trade-off. Delta printers, the Flsun Super Racer included, lack the accuracy and consistent print quality offered by Cartesian 3D printers. The difference is relatively negligible, but it’s a point to consider before buying for makers that favor quality over speed. 

On the filament front, the Flsun Super Racer’s Bowden extruder setup works great for PLA but coughs up the usual Bowden-related jamming and clogging issues with flexibles. For example, if you’re working with TPU, you’re better off sticking to a classic Cartesian printer – ideally with a direct drive extruder.

Anycubic Photon M3 Plus/Max – Fastest Resin 3D Printers Under $1,000

• Price: $699 / $1,099 — M3 Plus Available here / M3 Max Available here
• Technology: MSLA Resin
• Max Print Speed: 100 mm/h / 60 mm/h
• Build Volume: 197 x 122 x 245 mm / 298 x 164 x 300 mm

More than simply an update to the long-running Photon series, the Anycubic Photon M3 machines are turning more than a few heads as the fastest resin 3D printer range around.

In particular, the Anycubic Photon M3 Plus proposes a top print speed of 100 mm/h. The beauty of resin printers is that they cure in layers, regardless of how much space on the build plate that layer takes. Those 100 mm/h apply whether you’re printing a single small miniature or a batch of twelve, which makes the Anycubic Photon M3 Plus exponentially more productive.

The Anycubic Photon M3 Max is no slouch either, offering a respectable 60 mm/h, but does this across a massive 298 x 164 x 300 mm. That’s the largest of any Anycubic resin printer and among the highest capacities found on consumer-grade printers, rubbing shoulders with the hulking Elegoo Jupiter and Phrozen Sonic Mega 8K.

Elsewhere, the Photon M3 duo stands out for offering excellent detail with 34 microns XY resolution on the Plus and 46 microns on the Max. The Max has a 7K LCD, one of the highest pixel counts on the market, while the Plus pushes a 6K LCD – higher than the standard 4K found on comparable printers. Both machines also ship with Anycubic excellent textured checkerboard build plate, which offers superb print adhesion.

Read the full comparison: Anycubic Photon M3 vs M3 Plus vs M3 Max

Phrozen Sonic Mega 8K – Fastest High-Quality Resin 3D Printer

• Price: $2,199 — Available at Phrozen official here
• Technology: MSLA Resin
• Max Print Speed: 70 mm/h
• Build Volume: 330 x 185 x 400 mm

With the Phrozen Sonic Mega 8K, size and speed combine into arguably one of the most impressive mid-range professional resin printers on the market.

The 330 x 185 x 400 mm build volume is the largest available in this price range, and the Sonic Mega 8K darts across this printing expanse at a nippy 70 mm/h. No other printers manage to weave in such a large build volume with such high speeds; it’s always been one or the other.

The Phrozen Sonic Mega 8K allows makers to hone in on all the fine features and intricacies of even the most detailed models and minis thanks to a 43-micron resolution, propped up by a pixel-rich 15’’ 8K LCD. It’s a level of quality that simply isn’t currently available on any other printer in the same printer segment.

The build plate comes pre-calibrated, allowing you to print without delay once the Mega 8K lands on your doorstep. A clever dual linear rail design ensures the printer behaves and delivers those sharp details even high up into the upper reaches of the build area.

If you need a mammoth-format printer at a reasonable price to power a small business where time is of the essence, there’s little else out there that comes close to the Phrozen Sonic Mega 8K. If the build volume exceeds what you’ll conceivably ever need, a lower-cost resin printer such as the Anycubic Photon M3 Plus or even the standard M3 is likely a better use of your money. The Phrozen Sonic Mega 8K is a jumbo printer and will be far too much for most amateur makers.

Uniz Slash Plus UDP — Fastest desktop 3D printer

• Max print volume: 293 x 122 x 200 mm
• Price: $1,999 — Available on Matterhackers here
• Fastest 3D printer speed: 600mm/hour in UDP mode

Uniz have made a big impact since their original Kickstarter campaign that raised over $500,000 to produce super-fast resin 3D printers at consumer prices. This quick 3D printer uses Uniz’s Uni-Directional Peel (UDP) technology to print far faster than its competitors, at up to 600mm/hour when in UDP mode.

When not in UDP mode the maximum 3D printer speed is 200mm/hour, but this is still super fast. This is because not all parts are compatible, for example, any parts with cross sections, or fully enclosed parts cannot be printed in UDP mode; and no parts with solid infill can be printed either. You are also restricted as very tall prints cannot be printed in UDP mode, but if your part qualifies then you can print extremely quickly!

Not only is it an extremely fast 3D printer, but it’s also accurate. This SLA 3D printer has an XY resolution of 75 microns, and a minimum layer of thickness of just 10 microns. As a result, parts have very good surface finish and look almost like they have no layers at all. The printer can also calibrate itself, can be operated via your phone or table on the mobile app, and weighs just 12kg. It’s certainly one of the best speedy 3D printers for the price.

WASP 2040 PRO Turbo — Fastest 3D printer in the world

• Price: $3,400 — Available on Amazon here
• Max print volume: 200 x 200 x 400 mm
• Fastest 3D printer speed: 500mm/s recommend (some say it can print even faster!)

Delta 3D printers are known for their speed, and are the fastest FDM 3D printers in the world. The WASP 2040 PRO Turbo is a delta printer that is not only incredibly fast – at up to a recommend 500mm/s – but is also extremely accurate for an FDM printer. The resolution of up to 50 microns means very accurate and low cost prototypes and parts can be produced, and in record time. WASP claim they make the fastest 3D printers in the world for FDM.

WASP 3D printers are known for their reliability, with the Italian company ensuring the printers operate with workhorse-like consistency. It can print 3D printer filaments including ABS, PLA, PETG and Nylon, so if you want to print stronger parts from one of the tougher plastics you still can, and you can use third party filaments if you prefer – the WASP allows for these. and you can choose to buy the WASP 2040 as either a single or dual extruder 3D printer.

Unlike most RepRap 3D printer deltas, the WASP 2040 Turbo comes fully assembled, so those who aren’t masters of DIY do not need to worry. You can also choose to order it either as a single or dual extruder 3D printer based on your printing needs.

It’s the world’s fastest 3D printer for FDM, and also accurate and reliable – what more could you want for under $5,000!

• It also has a variation designed specifically as a clay 3D printer.

HP 3D Jet Fusion 5200 — Fastest Industrial 3D printer

• Price: Requires a quote
• Max print volume: 380 x 284 x 380 mm
• Fastest 3D printer speed: 4115cm³/hour

HP have only been actively involved in the 3D printing industry for the last few years, but have brought such technological advantages in that short space of time. The Jet Fusion 5200 epitomizes this, marking uncharted territory for 3D printing where it is now considered viable for mid-range production.

Multi Jet Fusion has always been known for its fast 3D printing speed, but the Jet Fusion is even faster than its predecessors. With speeds up to 4115cm³/hour, it’s faster than the Jet Fusion 4200 (4000cm³) and the 3200 (2800cm³) – and these were already some of the fastest 3D printers in the world. The high-quality 1200dpi print head resolution allows for extremely accurate parts with smooth surface finishes and crisp, sharp edges.

The Jet Fusion 5200 combines this astonishing speed with low part cost and scalability. Whole layers can be printed at once, rather than tracing each layer as with Selective Laser Sintering, meaning multiple parts can be printed at once without a drop off in productivity. Multi Jet Fusion isn’t known for its versatility of materials, but PA12, PA11 Nylons and TPU are strong materials with good properties for a variety of industries. It’s extremely fast, extraordinarily accurate, and a rare example of 3D printers being competitive in mid-volume part production – very exciting.

Do you really need a fast 3D printer?

Speed is always useful; nobody chooses to wait in a queue longer than they need to. However, with the quickest 3D printers, there are some cases where you can’t take advantage of this speed.

For FDM 3D printers, some materials become volatile and print with imperfections if you don’t slow right down, like PEEK, PC, and others. Printing at 150mm/s+ would just ruin your prints, so the speed is useless here.

Also, if you are printing a very simple object like a cube, speed becomes less useful as you can just use very large layer heights and print quickly anyway.

However, if your business depends on quick production, then absolutely go for a printer that can either print objects very quickly, or multiple objects simultaneously. The ability to rapidly prototype new designs and innovate quicker is invaluable, and other industries like 3D printed jewelry production or hearing aids need to be able to print custom designs at the highest speeds possible.

So, it depends. For hobbyists, speed is great for quality of life and printing all the cool things and useful 3D prints you can. For industry it can be more necessary, and businesses often opt for an industrial 3D printer than can meet their production speed requirements.

How Fast Can PLA Be 3D Printed?

The fastest FDM printers, such as the Flsun Super Racer, can print PLA up to 200 mm/h. However, the most common 3D printers, such as the Ender 3, can print PLA at around 50 to 80 mm/h without sacrificing print quality.

Related articles:

• Best large resin 3D printers (bigger = faster!)
• Best delta FDM 3D printers
• Best FDM 3D printers

7 Fastest FDM & Resin 3D Printers In 2022

• Last Updated: December 8, 2022
• Pat Nathaniel

3D printers are a great way to get your part, but if you’re impatient, then you want the fastest on the market. At the same time, you don’t want to waste money or compromise on quality. 

Don’t worry; this extensive list has you covered. 

We will dive into the fastest FDM printers, then take a look at some resin options. Afterward, we’ll take a look at what print speed is good for a normal printer and why printers can’t go faster.

Let’s take a look at some of the fastest 3D printers available for you to buy today.

Creality Ender 7 

Build volume: 250 x 250 x 300 mm

Get Discount Now

Check Latest Price

FLSUN Super Race (SR) 

Build volume: 260 x 260 x 330 mm

Click For Official Website

Check Latest Price

Original Prusa SL1S

Build volume: 127 x 80 x 150 mm 

Check Latest Price

Table of Contents

• FDM 3D Printers
  • 1. Creality Ender 7
  • 2. FLSUN Super Racer (SR)
  • 3. Qidi Tech iFast
• Resin 3D Printers
  • 4. Original Prusa SL1S
  • 5. Phrozen Sonic Mini 4K
  • 6. Elegoo Mars 3 Pro
  • 7. Anycubic Photon M3 Plus
• What is a Good Print Speed for 3D Printers?
• Relationship Between Speed and Quality
• Limiting Factors for Speed
  • Cooling the Plastic
  • Tiny Motors Driving the Motion
  • 3-Axis Setup
• How to Make a 3D Printer Faster
• Conclusion

7 Fastest & Quickest 3D Printers At A Glance
FDM 3D Printers
1. Creality Ender 7 (Best Value)
2. FLSUN Super Race (SR) (Best Choice)
3. Qidi Tech iFast

Resin 3D Printers:
4. Original Prusa SL1S  (Premium Choice)
5. Phrozen Sonic Mini 4K
6. Elegoo Mars 3 Pro
7. Anycubic Photon M3 Plus

FDM 3D Printers

1. Creality Ender 7

3D Printer Type: FDM | Materials: PLA, ABS, TPU & PETG | Build Volume: 250 x 250 x 300 mm | Max Print Speed: 250 mm/s

Folks, this is Avengers: Endergame. Creality is known for putting out affordable and high-performance printers (most notably its Ender series) and this one is its fastest yet. 

If you’re looking for a fast FDM printer for production, look no further. It literally can’t get better than the Ender 7. 

This is a heavy printer at 17 kg — so you might want to enlist some help when moving it around. (Your spine will thank you.) 

This weight is for two main reasons: 

1. Fast printing speed requires heavier and more robust stepper motors, and;
2. More weight equals less vibration, so your printer doesn’t wobble around like a washing machine at top speed

This is a CoreXY printer. The CoreXY structure differs from your typical run-of-the-mill Cartesian printer in that it distributes weight on the printhead rather than on the X and Y axes. 

This makes it print much faster than standard 3D printers.

In fact, the Ender 7 is up to 80% faster than the Ender 3 — and this difference is especially noticeable in big prints. It has an INSANE speed of 250 mm/s, which… speaks for itself, pretty much. 

This heavyweight champ also offers a huge build volume of 250 x 250 x 300 mm. For home users and hobbyists (anyone who isn’t building giant space robots), this is more than ample printing space. 

Our only gripe with this printer: when you’re printing fast, it’s bound to get noisy. But hey, for these results we’ll excuse it. After all, what racecar is ever silent?

• Remarkably shorter printing time than most printers in its range
• Ability to print large objects
• Built very solidly to last

• Can get noisy

Get Discount (Official Store)

Check Latest Price

2.

FLSUN Super Racer (SR)

3D Printer Type: FDM | Materials: PLA, ABS, PETG & Flexibles | Build Volume: 260 x 260 x 330 mm | Max Print Speed: 150-200 mm/s

We’re in the Grand Prix of 3D printers, and our next contestant is the FLSUN Super Racer!

If you’re looking for a fast and accurate printer, this one’s for you. 

With a print speed of 200mm/s, the FLSUN offers super precise detailing and accuracy. It’s a Delta-style printer that uses a sturdy linear rail to give the printer stability and keep your eardrums from exploding! 

The Racer gives you a roomy 260 x 260 x 330 mm build volume for large vases, giant ducks, cosplay masks, and so on. 

The FLSUN Super Racer comes with automatic bed leveling, which is a nice plus. It also has safety features built in place — which are really important for a printer. 

You’ve got the resume print function so you don’t lose your print in a power outage (insert gif of Grandpa Simpson yelling at a power grid). Then you’ve got the filament detection feature so the Racer warns you when you’re soon to run out. 

The FLSUN comes with a removable print bed — no need to struggle anymore with removing your prints. Here’s a neat trick: you can actually pop the print bed into the freezer for a few hours (with your printed part) for easier removal. 

This printer has a 0.4mm nozzle that can support 1.75 mm filaments of PLA, ABS, and PETG. Sorry TPU folks, This Printer is not for U! 

Layer thicknesses range from 5 microns to 30 microns — this printer really puts an emphasis on detail. Case in point, it’s got an accuracy of just 10 microns. Wow. You can achieve breathtakingly fine details! 

• Fine detail and small layer thicknesses
• 200 mm/s
• Printing safety features

• Delta printer may have an initial learning curve due to different setup

Click For Official Website

Check Latest Price

3.

Qidi Tech iFast

3D Printer Type: FDM | Materials: PLA, ABS, PETG, TPU, PVA, Carbon Fiber, Nylon & PC | Build Volume: 330 x 250 x 320 mm | Max Print Speed:  150 mm/s

Speed? Check. Dual extrusion? Check again! 

The Qidi Tech iFast is an FDM printer that gives you industrial-grade precision and speed at an affordable price tag. So if you want fast printing AND dual extrusion, this printer is perfect for you! 

The iFast lives up to its name with a print speed of 150 mm/s. It also has a roomy build volume of 330 x 250 x 320 mm where you can cook up larger prints. 

And with its multiple extruders, the iFast can print PLA, ABS, TPU, PETG, Nylon, carbon fiber, and water-soluble PVA.

It also has a heated enclosure for better printing of high-temp filaments — and built-in air filters to keep your printing space clean. 

Removing our printed parts was a breeze with this printer — all we had to do was remove the flexible print bed, bend it a little, and the print popped right off in one piece! 

The only thing we didn’t like was the noise coming from the stepper drivers when the iFast was in use. But if that isn’t a dealbreaker for you, this printer is perfect for speedy printing! 

• High printing speed
• Dual extrusion
• Easy part removal
• Large build volume

• Noisy stepper motors

Check Latest Price

Resin 3D Printers

4. Original Prusa SL1S

3D Printer Type: MSLA | Materials: 405 nm UV Resins | Build Volume: 127 x 80 x 150 mm | Max Print Speed:  1.4 s/layer

Highly detailed prints at a faster speed… The most coveted combination in 3D printing. Can anyone pull it off? 

Well, Prusa has! With MSLA (masked stereolithography) technology and a high-res monochrome LCD panel, the SL1S provides amazingly detailed prints at 80 mm/hr.

Before you balk at this seemingly low speed (compared to FDM), the SL1S is markedly faster than the average resin printer speed of 30-60 mm/hr. 

So if you want the sublime clarity and detail of resin prints at a comparatively faster speed, the SL1S is for you. 

MSLA works by curing UV resin using an LCD to mask each layer’s cross-section. The SL1S comes with an 8 UV LED array to cure resin with amazingly sharp detail. It also uses a 2560 x 1620p monochrome LCD with a pixel size of just 49 microns. 

This is an amazingly well-built printer (par for the course with Prusa), sporting a robust aluminum body with a 127 x 80 X 150 mm build volume. Perfect for smaller objects! And with a minimum layer thickness of 25 microns, you can easily capture fine details.  

And, in typical Prusa fashion, it comes with a thorough manual to guide you through everything step-by-step, including potential printing problems. We loved the detailed and clear documentation — it truly sets a standard for other 3D printer companies. 

This printer comes fully assembled — and as it’s a resin printer, you have the choice to buy it with a Cure & Wash station for post-processing of your prints. 

The printer comes with a half kg of Prusament resin — though since it’s open-source, you can use virtually any resin you want. 

• Amazing detail at relatively fast speed
• Sturdy and reliable aluminum build
• Very clear and helpful documentation

• Smaller build volume

Check Latest Price

5.

Phrozen Sonic Mini 4K

3D Printer Type: LCD | Materials: 405nm UV Resins | Build Volume: 134 x 75 x 130 mm | Max Print Speed:  80 mm/h

Looking for a lightweight resin printer that can print fast with amazingly crisp details quality? Do you want to print a snowman? Well, now you can “Let It Go” with the Phrozen Sonic Mini 4K! (See what we did there?)

The Phrozen Sonic Mini 4K offers a 4K resolution LCD screen that makes it 4x faster than traditional resin printers at a speed of 80 mm/hour.

This Mini contender offers a 134 x 75 x 130 mm build volume and weighs just 5kg! It’s perfect for printing in a smaller workspace. 

Let’s talk about detail — this printer offers an XY resolution of just 35 microns with 722 PI (pixels per inch) — the highest among commercial-grade printers. It offers layer thicknesses of 10 to 30 microns. 

As to software, the Mini 4K comes with Chitubox version 1. 6.5. Chitubox is considered the best slicer available for resin printers, and it’s packed with features usually only present in paid software. 

The Mini 4K offers multi-resin compatibility, which is really neat if you like working with different resin brands.

On purchase of this printer you get 1 year warranty except on the LCD and FEP film of the printer. It comes with a 2.8″ touch panel for easy navigation and prints via USB connection.

• XY resolution of 35 microns
• Touchscreen capability
• Multi-resin compatibility

• Doesn't offer Wifi option

Get Discount (Official Store)

Check Latest Price

6.

Elegoo Mars 3 Pro

3D Printer Type: MSLA | Materials: 405nm UV Resins | Build Volume: 143 x 90 x 175 mm | Max Print Speed: 30-50 mm/h

Are you looking for an affordable yet still fast and precise resin printer that can print big objects? 

The Elegoo Mars 3 Pro is your answer. 

It uses a light source of a whopping 36 UV LED lights and a Fresnel lens to produce a 405 nm wavelength. This combination yields high-quality prints with a smooth surface finish that you’ll love staring at and showing off to people. 

As some other printers already mentioned, it uses a 4K monochrome LCD. It’s a 6.66″ screen that comes with anti-scratch glass of 9H hardness.

It’s like a screen protector for your printer’s LCD, which is very handy in the event of a resin spill. That way, if some resin does end up being where it shouldn’t, you’ll only have to replace the glass and not the whole LCD.  

The light source and glass protector are both new features from the Elegoo Saturn S and Saturn 2, so this truly makes the Mars 3 a “Pro” machine. 

It’s got a large build volume of 143 x 90 x 175 mm and, being a robustly built and reliable machine, is perfect for round-the-clock printing. It comes with a carbon filter for resin fumes and odor, as well as a powerful and efficient cooling fan. However, we could still feel the remnants of some odors when printing.  

Let’s talk software — the Mars 3 Pro can be used with Chitubox or Lychee Slicer 3.0. Both are viable choices of software. You have to pay extra for a Chitubox Pro subscription, though. 

It prints with a pixel size of an amazing 35 microns and takes about 2.2 seconds to print a layer. 

• Large build volume
• Affordable
• High-quality printing

• Carbon filter not 100% functional
• Have to pay extra for Chitubox Pro

Get Discount (Official Store)

Check Latest Price

7.

Anycubic Photon M3 Plus

3D Printer Type: MSLA | Materials: 405nm UV Resins | Build Volume: 245 x 197 x 122 mm | Max Print Speed:  100 mm/h

Are you looking for a resin printer that can make some super high-definition and smooth-surfaced amazing prints? 

It’s still at an experimental stage in some ways, but the Anycubic Photon M3 Plus comes with some impressive features.

It’s got a 9.25″ 6K monochrome screen where its predecessor, the Photon M3, has a screen of 7.6″. 

Using the Anycubic LighTurbo, which consists of 40 LED beads in a parallel matrix (Where are you, Keanu?), you can get a pixel size of just 34 microns, which is pretty impressive for an MSLA printer. 

It has a pretty large build volume of 245 x 197 x 122 mm. It’s equipped with an aluminum alloy build plate with superb adhesion — in fact, too superb. We had a bit of trouble getting our prints off it. For a printer of this size, it’s better to just use a flexible build plate.

This printer is advertised as having a speed of 100 mm/h, but in reality it comes with a speed of 20 mm/h for 50 micron layers. 

It’s got a smart resin filling feature that’s more of a burden than a solution, since it sometimes overfills the vat with resin and then you have to pour it out. Yep, not so great … we’d recommend turning this feature off. 

This printer does come with a camera that’s connected to Anycubic Cloud, a cloud service that also connects to your slicer, and the Anycubic Cloud app on your phone (the website doesn’t work). 

The slicer for this printer is Photon Workshop, which is in many ways similar to Chitubox. 

The Photon M3 has a responsive 5″ touchscreen, so that’s a nice . . . touch. 

It comes with an anti-scratch glass on the LCD in case of resin spills (we thought that a very wise addition). The printer comes with a tool set, as well as a scraper, masks, and gloves.

• Amazingly detailed prints
• Large build volume
• Camera for remote monitoring of prints

• Vat autofill feature unnecessary
• Can only use this printer with phone app
• Slower than advertised

Get Discount (Official Store)

Check Latest Price

What is a Good Print Speed for 3D Printers?

Source: Youtube The Technology Man

A good print speed really depends on what you’re using your printer for, and it’s all about personal preference.

For a recreational printer that you’re just using for fun, realistically nothing’s wrong with 1 mm/s – it’s just going to take a lot of patience.

3D printer manufacturers know that we aren’t patient, so they upped that number a lot.

As you look around the market, you’ll find that a lot of commercial printers can hit 40-60 mm/s comfortably.

For a little more money, you can hit 100 mm/s on a commercial printer. The higher-end units will run around 150 mm/s.

Manufacturers suggest running at 60% of the max speed so you get a higher quality. 

But how is quality related to speed?

Relationship Between Speed and Quality

Speed and quality seem to be related in every industry – if your mechanic is the fastest in the world, you’re going to be sitting on the side of the road a lot.

3D printers are the same in this sense, but for a technical reason.

The actual speed of a printer moving in a straight line doesn’t affect the print a ton. It’s the change in speed that does.

When you’re in a car and you stomp on the gas or brake pedal hard, your body will lurch. When a 3D printer suddenly accelerates or slows down, the same thing happens.

When the 3D printer lurches, the print quality suffers. You’ll get stringers, wobbly sections, fuzzy exterior walls, and an inconsistent build.

A ton of effort has to go into ramping the printer up to speed and decelerating it without hurting the print.

There are other reasons why the speed can hurt the quality of print.

Limiting Factors for Speed

Don’t let this list fool you, a majority of printers on the market are painstakingly slow in comparison.

So what slows down 3D printers? Let’s look at the answer in terms of FDM printers.

If you recall, FDM printers work by laying down hot plastic from an extruder head that moves on a 3-axis setup, driven by tiny motors. Every step of this process limits how fast you can print

Cooling the Plastic

The first thing that limits how fast you print is how long it takes the hot plastic to cool.

Since you’re building on top of previous layers, the first layer has to be solidified enough before adding the second layer.

Imagine you’re painting a wall, but you don’t wait for the primer to dry before applying the first coat of paint. The result is similar to 3D printers.

The layers will drag, deform, and might get caught on the extruder nozzle. In other words, your final print will be unrecognizable.

Tiny Motors Driving the Motion

If you want a 3D printer to be small, quiet, and inexpensive, you need tiny motors to run the operation.

• Check out our review of the smallest 3D printers here

This is fine because the extruder isn’t heavy either, so you don’t need a lot of power.

If you want the printer to move faster, you need bigger, heavier, stronger motors. This would call for a complete redesign of how 3D printers look, and the added weight would be a huge problem.

The tiny motors are another limiting factor to the speed.

3-Axis Setup

The 3-axis setup (or gantry) is the final big hurdle.

It’s tough to understand how this limits speed without a deep explanation, but it works for the same reason that trains run on a single track.

Single-axis motion is really easy to speed up and predict the outcome. When you add the y- and z-axes, things become more unpredictable, and more vibration affects the process.

Your 3D printer relies on predictability and few vibrations. That’s the secret sauce to get good quality on your final print.

That’s why the printers have to take it slow on a 3-axis gantry, so the final prints turn out good.

Let’s see what can be done to make 3D printing faster.

How to Make a 3D Printer Faster

3D printers can be faster by getting rid of the limiting factors described above.

• Get rid of the jerk associated with quickly getting up to speed and slowing down.
• Use materials that cool a lot quicker or don’t require cooling.
• Step away from the tiny motors used to drive 3-axis printers.
• Lastly, get rid of the 3-axis setup altogether.

The way printing companies achieve this is by getting away from FDM altogether. They’ll opt for SLA, GDP, or MJF technologies which eliminate one or all of these limiting factors for speed.

Unfortunately, the way to make a 3D printer faster is to get away from FDM printers and move to another technology of printer.

Conclusion

If you want to print quickly, there aren’t a lot of printers that can do so without hurting the final print quality. This shortlist of printers can manage to do it successfully, but it comes at a price.

You’ll be shelling out more cash and potentially getting a smaller build volume. You have to consider which is the most important for your application and go from there.

When it comes to true speed, the printers on this list stand in a league of their own.

Related Articles:

• Best DIY 3D Printer Kit Review 
• Best 3D Printer Under 200 Review
• Best 3D Printers Under 300 Review
• Best Resin 3D Printers
• Best Delta 3D Printers

Pat Nathaniel

Pat is the editor-in-chief at Printing Atoms. He has a BS in Mechanical Engineering from the University of Florida and wants to spread the word on 3D printing. When he's not writing, he likes to tinker with his Ender 3 Pro, test filament brands, and scuba dive.

high performance low cost industrial 3D printer

The CreatBot F1000 is an industrial size 3D printer with auto-elevating dual extruders, 1000x1000x1000mm build volume and other great features at a lower price than other brands.

Large scale FDM 3D printers tend to be expensive, especially those capable of printing high quality models using professional grade materials. The high price tag of these massive industrial machines has kept many small businesses and manufacturers from using 3D printing technology to create prototypes or even make functional parts.

The new CreatBot F1000 aims to make large-scale 3D printing more accessible. How? Combining serious print volume and an impressive array of professional features with a secret ingredient – ​​affordability.

CreatBot F1000: large build volume and smart features

CreatBot F1000 offers a full cubic meter of build volume (1000 x 1000 x 1000 mm) plus:0018

Fully enclosed chamber with heating

Heated filament drawer

Built-in camera for remote monitoring

Linear guide with servo drives

Accuracy and reliability make the CreatBot F1000 a terrific option for both industrial and professional users who need to print large prototypes or functional parts in one go.

One cubic meter for 3D assembly is quite a lot. Such a space could allow 3D printing of small production runs or huge prototypes, or even mass production of standard quality products! Here is one of the happy customers of the F1000 3D printer:

Besides the outstanding build volume, there are a few other big features that make this new big 3D printer a big deal (pun intended). The CreatBot F1000 features new dual auto-elevating extruders, a heated enclosed chamber, an auto-leveling system, and a built-in monitoring system that allows you to control your printing process with an easy-to-use app.

This massive workhorse also features a fast build plate heat that, together with a heated chamber, produces incredible results from professional quality materials. Needless to say, the CreatBot F1000 sets a new standard in additive manufacturing and expands the material capabilities of large-scale FDM 3D printers, which in turn saves our customers significant time and money.

The CreatBot F1000 has more than enough capacity for all real-world applications

The CreatBot F1000 is designed to make 3D printing large-scale objects and prototypes as easy as possible. This industrial 3D printer is the answer to growing market demand across a range of industries.

The F1000 has recently been printed with a large theme park snake head (pictured). The result was a high-resolution object, one meter high and weighing 35 kg. Can you imagine how this huge 3D printer prints such a heavy model 24/7? A nozzle with a diameter of 1.5 mm was used, it took more than 200 hours to print.

There are many other examples of real work CreatBot F1000 in professional conditions. For example, one global supplier of advanced automotive systems and equipment used the CreatBot F1000 to design and develop molds for Audi, Volkswagen, Nissan, and GM car seats.

This video shows how these forms are printed. The bowl and lid must withstand pressure up to 100 MPa, so 50% nylon carbon fiber materials were used for production. The final accuracy of the model was +0.1 mm and passed the rigorous tests often required in the automotive industry.

The mold cover took 120 hours to 3D print and weighed 9 kg. The size of the part was 820 × 748 × 160 mm.

The mold bowl took 200 hours and weighed 16 kg. The size of this part was 820 × 748 × 200 mm.

After test runs, the performance of the CreatBot F1000 proved to be on par with or even better than some well-known brands of industrial 3D printers from Germany or the USA, with the difference, however, that this printer is more than three times cheaper than competitors. Someone now regrets buying expensive large-scale 3D printers instead of the impressively inexpensive and equally capable CreatBot F1000!

Without a doubt, the CreatBot F1000 is the best choice for an industrial large scale 3D printer that can handle engineering grade materials.

Specifications CreatBot F1000

Displacement	1000 × 1000 × 1000 mm
Extruders	Automatic rising double extruder
Minimum layer thickness	0.05 mm
Maximum print speed	120 mm/s
Maximum nozzle temperature	420°C
Maximum platform temperature	100 °C
Maximum temperature of assembly chamber	60°C
Filament storage temperature	45/65°C
XY positioning accuracy	11 µm
Z positioning accuracy	2. 5 µm
Dimensions	1740 × 1300 × 1920 mm
Weight	550 kg

Fastest FDM 3D Printer Dynamo3D One Evo

Archive

Follow the author

Follow

Don't want

Be sure to watch the video at the end of the article, starting with the mark at the second minute.

We all wish our 3D printers could print faster, right? After all, who wants to wait hours for a tennis ball-sized plastic product to print. Sometimes you can wait, but what if you need a part urgently?

A few months ago an Italian company called Dynamo3D released their D3D One 3D printer. The price of a printer with a fairly large working volume and everything necessary for comfortable printing was €1139.50, but Dynamo3D did not rest on its laurels and continued development.

As a result, the Dynamo3D team has been able to significantly increase the 3D printing speed of their new D3D One Evo 3D printer, which will be officially unveiled at the 3D Printing Shows in London (September 4-6) and Paris (October 17-18). Dynamo3D worked on this printer with Create it REAL, a Danish manufacturer of 3D printer components and electronics. This 3D printer prints at speeds up to 400mm/sec, making it one of the fastest, if not the fastest, FDM printers on the market today. The actual machine speed can reach 700mm/s.

Other features of this machine:

• Printer dimensions: 38 x 44 x 45 cm.
• Printer weight: 13 kg - packaged shipping weight [23 kg].
• Filament diameter: 2.85 mm.
• Nozzle diameter: 0.4 mm.
• Filament types: ABS / OPL / FLEX, can also be used for other materials.
• Available printer colors: white-orange - splatter - kaleidoscope - green hexagon - white - geometric shapes and more.
• Software: RealVision D3D.
• Volume max. assembly: 24 x 24 x 25 cm.

In September, after the official announcement, the printers will be available for pre-orders. The price will be €1900.

What do you think of this project? Will you consider purchasing this printer? Feel free to discuss this news in the comments below, and don't forget to watch the video below, which demonstrates the almost incredible print speed of this new printer:

Article prepared for 3DToday.ru

Article comments

More interesting articles

four

Subscribe to the author

Subscribe

Don't want

One of the most promising and least developed areas of 3D printing is bioprinting.

---

Learn more

• 
  Rostock 3d printer review
• 
  3D image scanners
• 
  Rat 3d print
• 
  When was the first 3d printer invented
• 
  3D printer violin
• 
  3D printer alternatives
• 
  Mass production with 3d printing
• 
  Tiko unibody 3d printer review
• 
  Made with 3d printer
• 
  Things you can make with 3d printers
• 
  Silicone filament for 3d printer