Diy 3d printer build

The 10 Best DIY 3D Printer Kits 2022 (Starting at $150!)

Increasingly, makers are turning away from desktop FDM 3D printers, preferring to buy a cheap 3D printer kit and build their own DIY 3D printer from scratch. Some of these are RepRap 3D printer kits, and some are specially designed kits.

Best Laser Cutter & Engraving M...

Please enable JavaScript

Best Laser Cutter & Engraving Machines 2020

The 3D printer kit revolution has reduced prices, led to a number of key breakthroughs, and has made 3D printing more accessible than ever before.

These 3D printer kits can take just a few minutes to assemble, or take hours or even days. They can also vary greatly in price, print accuracy, maximum build and print speed. Some even use technologies other than fused deposition modeling — you can now buy DIY SLS 3D printers and SLA 3D printers.

3D printer kit name and brand	Build Volume (mm)	Price	Where to purchase for best price	Alternative Purchase Option
Creality Ender 3	220 x 220 x 250	$189	Creality Store here	Amazon here
Prusa Mini	180 x 180 x 180	$399	Prusa Store here
Creality Ender 3 V2	220 x 220 x 250	$279	Creality Store here	Amazon here
Creality Ender 5	220 x 220 x 300	$349	Amazon here	3DJake UK & Europe
Flsun QQ-S	255 x 255 x 360	$369	Amazon here
Tronxy X5SA Pro	330 x 330 x 400	$399	Amazon here
Anycubic Vyper	245 x 245 x 260	$429	Anycubic Store here	Amazon here
Creality CR-10 / V3	300 x 300 x 400	$369 / $459	Creality Store here	Amazon here
Prusa i3 MK3S	250 x 210 x 210	$749 / $999	Kit available on Prusa store here	Fully assembled on Prusa store here
Peopoly Moai	130 x 130 x 180	$1,295	Matterhackers here

Advantages of DIY 3D printers

Open source: Most homemade 3D printers are also open source 3D printers, meaning they can be tinkered with, upgraded, and modded freely with the creators’ permission. Many Creality, Prusa and Anet printers are open source, as well as desktop 3D printers like BCN3D and Ultimaker printers.
Open build areas: 3D printer kits rarely feature closed chambers or enclosures as standard. This would affect the printing of filaments like Nylon or PEEK, but is less of an issue for standard filaments like PLA or PETG.
Easily upgradable parts: DIY 3D printer owners are frequently switching out parts, such as nozzles, hot ends and extruders for better quality parts.
Lower price: For the quality and size, you get a better deal if you build your own 3D printer.
Larger build volume: The open build area means that you can have a larger 3D printer build area for the same size, neglecting the need for an enclosing frame. Therefore, low cost kits like the Creality CR-10 can have huge build volumes.

Build your own 3D printer: what makes a good DIY 3D printer?

We used several criteria to determine which 3D printer kit made it into our ranking:

Cheap DIY 3D printer kits: We only included FDM 3D printer kits under $1,500. The printers are listed in price order, cheapest first.
Print quality
It it easy to build your own 3D printer: Not everyone is a technology wizard. Therefore, any kit that can be assembled quickly, easily, and is simple to operate, is at an advantage.

The best 3D printer kits

3DSourced is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

1. Creality Ender 3

Price: $189 — Available on Creality Store here / Available on Amazon here
Build volume: 220 x 220 x 250 mm

The original Ender 3 is still one of the most popular 3D printer kits in the world, more than three years after it was originally released. The low price, great build area, and reliability have cemented the Ender 3 as one of the best 3D printer kits around.

The reliability is a major selling point in such a cheap 3D printer kit. Whereas most DIY printers in this price range are plagued by issues caused by low-quality parts, the Ender 3 is dependable and consistent, partly due to its upgraded extruder to prevent clogging or poor extrusion.

The resume printing function is useful if you’re prone to power cuts or want to print for several days straight and don’t want to risk a huge ruined print, and the Ender 3 is fairly quick to assemble, and shouldn’t take more than an hour or so.

However, it doesn’t feature auto-leveling — you’ll need to install a BLTouch or similar kit for that.

2. Prusa Mini — Great Prusa 3D printer kit

Price: $399 — Available on Prusa Store here
Print volume: 180 x 180 x 180 mm
Print speed: up to 200mm/s

The Mini 3D printer version of the wildly successful Prusa MK3S, the Mini retains the 0.05mm layer precision and can still calibrate itself, but costs less than half of the i3 MK3S. With the Mini, you can build your own 3D printer — and one with Prusa-level reliability! — for just $349.

It’s more compact, with a smaller build volume, and features removable spring steel sheets that make removing finished prints extremely easy — just flex the build plate and prints will come off with ease.

The extruder cannot reach the same temperatures during printing as the MK3S, though you can still print a number of tougher filaments like ABS, PETG, ASA and flexible filaments. The Mini retains the fast 200mm/s max printing speed, and can be upgraded to feature a filament sensor.

Overall, it’s another reliable 3D printer by the trusted Prusa brand who have proven over the years that their printers are some of the best 3D printer kits around. If you have the money, go for the MK3S, but for those on a budget, the Mini does a great job.

3. Creality Ender 3 V2 — Best DIY 3D Printer Under $300

Price: $279 — Available on Creality Store here / Available on Amazon here
Build volume: 220 x 220 x 250 mm

Building on the success of the Ender 3 and improving and fixing its few flaws, the Ender 3 V2, while the same size build volume, is a much enhanced DIY 3D printer.

The upgraded motherboard makes the printer quieter than ever, and the extra power makes for a much more stable and precise printing experience.

Read more: the quiet 3D printer buyer’s guide

The upgraded extruder is also a great touch. It’s easier to load and feed filament into via the rotary knob, ideal for PLA and flexible filaments. The large 4.3-inch screen makes the interface more intuitive, and the Ender 3 V2 is really easy to use overall.

Another extra is the carborundum glass platform, which can heat up faster than ever and improves adhesion so you can be sure of a great first layer. Overall, if you have the extra $100 to spare, consider going for the Ender 3 V2 over the original.

4. Creality Ender 5 — The Best DIY 3D printer under $500

Price: $349 — Available on Amazon here / 3DJake UK & Europe here
Print volume: 220 x 220 x 300 mm

Another Creality kit, the Ender 5 is another great 3D printer you can build at home. The Ender 5 is $100 more expensive, but boasts a number of improvements that make the extra money seem worth it.

Firstly, it can print taller prints than the Ender 3 — 300 mm high rather than 250 — important if you print tall structures like tall vases or monument 3D models. The structure is also stronger, having adopted a cube shape like the Tronxy X5SA which helps with stability, reducing vibrations or movements from external events, and improving part surface finish and quality.

Moreover, the minimum layer height of 50 microns is extraordinary for such a cheap machine. Review after review repeats how crisp the surface finish of their prints look with the Ender 5, so it’s fair to say the Ender 5 is a smash hit.

For an extra $50 you can upgrade to the Ender 5 Pro printer kit, at $399. It’s available to buy here.

Note: while the Ender 5 can be tweaked to increase print speed without a noticeable loss in print quality, we recommend you don’t get too extravagant with this. Stick with 60 mm/s or below for models with intricate parts — it’s worth a bit of extra printing time to guarantee crisp prints.

5. FLSUN QQ-S — Great Delta DIY 3D printer

Price: $369 — Available on Amazon worldwide here
Print volume: 255 x 255 x 360 mm
Print speed: up to 300mm/s

One of the best DIY delta 3D printer machines out there, the Flsun QQ-S features notable improvements on the original Flsun QQ. It comes 90% assembled, so though technically still a 3D printer kit it will take under an hour to get up and running.

We were lucky enough to test the FLSUN QQ-S, make sure to also check out our FLSUN QQ-S review.

Not only does it have a fantastic build volume for the price — especially the ability to print tall parts! — but it also comes with an upgraded lattice glass print bed, allowing for faster heating up to 100C in under 5 minutes, less warping and better adhesion during 3D printing. This is perfect for materials such as ABS filament, which are known to warp significantly under the wrong conditions.

Another advantage that beginners will enjoy is that as delta 3D printers don’t move the print bed — the print head does all the moving — the printer only needs to be auto-leveled once. It comes with a titan extruder, and can print with common printing materials like PLA and ABS, PVA, and HIPS for supports, as well as wood-filled filaments and flexible filaments.

It’s accurate, too, able to print at up to 50 microns. Overall, it’s a fantastic delta 3D printer kit that prints accurately, and super fast — it even made it into our fastest 3D printer ranking. It’s also one of the easiest DIY 3D printers to build, coming almost fully assembled — you just need to attach the gears and rods to hold the structure up, and then attach the extruder and filament holder.

6. Tronxy X5SA Pro — Huge Self-Assemble 3D printer

Company based: China
Price: $399 — Available on Amazon here
Build volume: 330 x 330 x 400 mm

Kit 3D printer kings Tronxy showed humility and dedication to improve the X5SA Pro, fixing a number of small issues that affected the original. The X5SA Pro addresses the X-axis issues and has made it more stable, and upgraded the materials forming the printer kit’s structure. Now on the X5SA Pro, most of the printer is made from aluminum and is heavier and more stable, reducing vibrations and generally improving print performance.

As for the X5SA’s specs, it’s a large 3D printer DIY kit with similar printing sizes to the Creality CR-10, and boasts a 330 x 330 x 400 build volume. It claims increased precision vs the original Tronxy X5SA, and has a maximum accuracy of 125 microns. It’s impressive, reliable and one of the best cheap 3D printers you can get with such a large size — so those with big 3D printing ideas will enjoy both this and the Creality CR-10.

It’ll probably take you around four hours to build this printer kit, but it’ll be worth it once you start printing!The Tronxy X5SA Pro’s cube shape offers stability benefits resulting in good surface finish.

7. Anycubic Vyper

Price: $429 — Available on Anycubic store here / Available on Amazon here
Build volume: 245 x 245 x 245 mm

A key feature on the Anycubic Vyper missing from many printers in this price range is that the Vyper self-levels. This is a huge relief for busy makers who would rather not re-level their printer every few prints, and who just want to get to the fun part — printing! The 16-point bed leveling process accounts for differences between the nozzle and bed and can be done in just one click.

The 32-bit motherboard is beefed up compared to previous Anycubic 3D printer kits, offering silent printing and improved stability. We tested the Anycubic Vyper and found it to be consistent in printing, easy to operate with the 4.3-inch touchscreen, and it was incredibly easy to assemble — we built it in 10-15 minutes.

The new PEI spring steel magnetic print bed can be lifted off the platform easily for easy removal of your finished parts, and is designed to be scratch and heat resistant and to work well with standard filaments such as PLA, ABS, PETG, and TPU.

The Vyper also features an innovative new two-fan dual cooling system, cooling down parts quicker and enabling faster printing without causing errors — the Vyper can comfortably print at 100mm/s.

8. Creality CR-10 / V3

Price: $369 / $459 — Available on Amazon here / Available on Creality Store here
Print volume: 300 x 300 x 400 mm

The Creality CR-10 has a passionate group of supporters who hail it as the best DIY 3D printer kit in its price range. Manufactured by Creality, the CR-10 is a fantastic 3D printer build kit that can be built within 45 minutes.

For a larger version, the Creality CR10 MAX has 450 x 450 x 470 mm maximum build volume, and costs $999. You can buy it here / or on 3DJake UK & Europe here
For a smaller version, the CR10 Mini is available — you can buy it here / or on 3DJake UK & Europe here

The Creality CR-10 has an accuracy and print volume which is competitive with printers 5 times more expensive. With it’s minimum layer thickness of 0.05mm and fantastic 300 x 300 x 400 mm build volume, the Creality CR-10 is a great printer for just $370. It’s easy to use, making it the perfect 3D printer for beginners.

9. Prusa i3 MK3S — best 3D printer kit

Company based: Czechia
Price: $749 as a kit — Available on the Prusa store here / $999 fully assembled — Available on the Prusa store here
Build volume: 250 x 210 x 210 mm

The Prusa i3 is known as the undeniable king of DIY 3D printer kits. These RepRap kits are fantastic, sporting an impressive print volume of 250 x 210 x 210 mm, and being able to print at speeds up to 200mm/s! It’s also accurate, durable and a complete workhorse, with layer heights from 0.05 mm and a bendable print surface to make removing finished prints as easy as possible.

Accessible via USB stick or by SD card, the Prusa i3 MK3 kits are designed to be simple to use as well as effective. With layer resolutions up to 50 microns, the Prusa i3 homemade 3D printer is so effective that it outperforms far more expensive 3D printers. It can print tougher filaments than more expensive printers too, with a Bondtech extruder that can reach temperatures of up to 300C, making printing Polycarbonate, ABS, Nylon, and other difficult filaments no problem.Colorful prints are possible with the Multi Material Upgrade Kit, which we discuss below.

Additionally, you can print up to 5 colors simultaneously with your Prusa if you purchase their multi-material upgrade kit, costing $300. This makes colorful model printing a breeze, and opens up for far more extravagant printing projects.

With a Multi Material Upgrade kit, it can also print multiple colors. We explain more in our color 3D printer buyer’s guide.
You can buy the Multi Material Upgrade Kit 2.0 here.

You can choose to either assemble the kit yourself or buy the printer pre-assembled, though this costs a few hundred dollars more. Overall, the Prusa remains the undisputed king of DIY 3D printer kits, with its competitors needing to do a lot of catching up to dethrone it.

The Prusa, with Multi Material Upgrade kit, allowing it to print multiple colors simultaneously. We explain this in our color 3D printer guide.

10. Peopoly Moai SLA Kit — Homemade resin 3D printer kit

Price: $1,295 — Available on Matterhackers here
Build volume: 130 x 130 x 180 mm

The only resin 3D printer featured in our 3D printer kit guide, the Peopoly Moai is an incredible feat of engineering. It’s huge, offers incredible accuracy and precision, and best of all, you can build your own 3D printer at home from scratch.

For those looking for an effective SLA 3D printer, and who do not want to pay full price, the Moai kit could be the perfect printer for you. It is so accurate that it can mechanically print up to an astonishing 5-micron layer height, according to Peopoly, though you’ll likely never reach this accuracy because you won’t need to, nor would most resins or models accommodate this.

Featuring a 70-micron laser spot size, once you’ve built this homemade 3D printer you’ll be ready to create resin molds for 3D printed jewelry, dental models, engineering pieces, as well as prototypes for rapid prototyping or fun characters if you use the Moai as a 3D printer for miniatures.

The Peopoly Moai is open to use third-party resins, for those who want to save money on lower-cost resins and are fine with the slight quality drop-off. The printer itself however does not come with any resin, so you’ll need to purchase that with the kit. It is only to be expected that the Moai will take some time to assemble, as resin 3D printers are more complex than their FDM 3D printer counterparts, but most makers will be able to build their own 3D printer within 4 hours.

Should You Build Your Own 3D Printer? Worth It or Not? – 3D Printerly

3D printing has the nature of doing things yourself, but how far can that really stretch? Some people wonder whether they should buy a 3D printer kit, or just build one from scratch themselves.

If you don’t have prior experience, you should avoid building a 3D printer from scratch because it could get tricky, so I wouldn’t recommend it for beginners. For the people who are experienced, and like projects and exciting challenges, however, it can be a great idea to build a 3D printer.

This article will take a close look at the pros and cons of each possible pathway, so continue reading for a highly detailed explanation on this subject.

Can You Make/Build a 3D Printer at Home?

It is definitely possible to make or build a 3D printer from home, as long as you have all the relevant parts, tools and the guidance on how to do it properly. The process isn’t so easy, especially for beginners, so you need to closely follow a tutorial or try to gain more experience with a DIY 3D printer kit.

Putting together the frame itself isn’t too difficult to do because they are just metal aluminum extrusions that need a few screws in them. The difficult part is getting the perfect alignment, fixing together the hotend, extruder, fans, and other smaller parts properly.

There are great tutorials out there that can guide you on getting each step correct, so you’ll need to take your time and really understand the process. I’d definitely watch the full video a few times before starting the project so you know what to expect.

Many people have completed the task of building their own 3D printer at home, even beginners, so it’s more than possible, though you are likely to run into some kind of troubles along the way.

Having a good idea on how 3D printers work is essential in being successful in this project. It’s a great project for many out there, though it can get a little complicated when learning about the inner details of the process.

There are many things to learn so it’s quite a steep learning curve, which I experienced my self, but once you get there it’s very worth it.

In addition to that, as you’re building a 3D printer, you’re also becoming continuously aware of possible modifications and how you could make your printer even better with custom parts.

There are essentially two ways to build a 3D printer at home:

Build one from scratch
Build a DIY 3D printer kit that can be bought online

The latter is highly recommended for people who have never owned a 3D printer before. This will give you a great start, and a bit of experience so you’re nicely prepared whenever you want to build your own printer from zero.

In addition, the task at hand could turn out to be very fun as well if you’re that type of person that likes a DIY challenge. People have found encouragement in difficult challenges and have worked hard to build their own 3D printers without buying any kits.

It makes the final product all the more rewarding.

There are many different kinds of 3D printers out there, so to begin in the right direction, you’ll have to do some thinking and map your plan out first.

Why should you do this? Because there are several variations in the four following factors that make up a 3D printer:

Size of the printer
Printer type (Cartesian or Delta if we’re talking about FDM 3D printers)
Extrusion type
Either a Single or Dual extruder

Please note that properly deciding on this will shape the experience of your 3D printer. Think critically about what you’re going to print with this self-made 3D printer and then act accordingly.

Size of the 3D Printer

The size of the 3D printer matters according to the use case, the budget, and the spare room of your workspace. Small-sized 3D printers cost less, keep the footprint to a minimal level, and are optimal for rapid prototyping.

On the same side, a big 3D printer with a large print bed may be the one for you if you intend on making sizeable and huge prints with it, especially projects like helmets, body suits, or big ornaments.

Type of 3D Printer

After that, then there’s the question of building either a Cartesian or a Delta-style 3D printer. Both of these options have their own pros and cons.

Delta 3D printers may not be the most precise type of printers out there, but they’re definitely the fastest. Go for building one of these if rapid prototyping with a room for less detail works for you. They do tend to have more complications I hear.

On the other hand, Cartesian-style 3D printers boast a far wider community, have greater part availability, and are also much more precise than their Delta counterparts.

If you want more information about these two types of 3D printers, you check out my article Delta Vs Cartesian 3D Printer – Which Should I Buy? Pros & Cons.

Type of Extrusion

Next, you’ll have to decide between a Direct Drive or Bowden-style extrusion system. This is also another important factor that you’ll have to look out for.

Bowden setups offer more speed, but aren’t quite up to the task when it comes to flexible filaments like TPU and TPE, though in recent times, we have definitely seen some improvements in their ability to print them.

A Direct Drive extrusion system might be heavy and may print slowly, but there’s flexibility in printing materials and lesser print-related issues like stringing and oozing.

An article I wrote going over this exact topic is the Bowden Feed Vs Direct Drive Extruder – A Quick Comparison article which goes into more detail.

Single or Dual Extruder

Lastly, you have either a dual extruder 3D printer or simply a single extruder machine to choose between. With two extruders, you can change filaments conveniently and print using two colors.

It really expands and opens up your limitations, though you can imagine it can be a little more challenging to put together. If you are a starter, it’s probably best to go that single extruder route.

On the other hand, the single extruder 3D printer is a lot easier to maintain and is going to have less issues in the long-run to deal with. Check out my article talking about both types of extruders – Single Vs Dual Extruder 3D Printer – Which One to Choose?

As 3D printing is an enormous field, and building a 3D printer yourself is very challenging, in-depth research is a must.

So once you’ve got all that penned down somewhere, your next step is equally crucial – getting all parts and sorting them out together.

For reference, the following is a comprehensive video that shows you how it’s done from A to Z, including what parts to choose, and what type of a 3D printer to build.

Building a DIY 3D Printer Kit Vs Building From Scratch – Pros & Cons

As there are two different options for building a 3D printer, let’s get into the pros and cons of both to see what can be our takeaway here.

Advantages & Disadvantages of Building a DIY 3D Printer Kit

Pros

If you’re thinking of scratch-building a 3D printer, a DIY kit can be a great way to start first.
Considering the ample learning curve, DIY kits can make you experienced and detail you with more information in the vast world of 3D printing.
3D printer DIY kits are less expensive than fully-assembled printers.
It’s much less time-consuming than building a 3D printer from scratch.
With famous 3D printing manufacturers, you’ve got vast communities to help you on your DIY journey.
3D printer kits usually come with an instruction manual to help you nail assembly.

Cons

If compared to a fully-assembled 3D printer, you need to have some basic knowledge of putting parts together so there’s definitely effort and knowledge required here.
You also have to put in more hours significantly versus a pre-assembled 3D printer.
The complications involved might lead you to frustration and giving up half-way if you’re not up for it.
Without buying more parts, you cannot customize your 3D printer as per your choice if you opt for a DIY kit.
In terms of software upgrades and configuration, some 3D printer kits may have limitations.
When put toe-to-toe against a printer built from scratch, you’re not going to get flexibility in terms of design and other modifications.

Advantages & Disadvantages of Building A 3D Printer From Scratch

Pros

When scratch-building, you get to learn your machine inside out.
The additional teachings of this method will allow you to make customizations of your own.
This method might be cheaper if compared to assembled 3D printers or even 3D printer kits.
If done and understood right, building from scratch can get quite fun and entertaining.
You get more flexibility in choosing designs and can also implement much better safety protocols if building from scratch
The end result, after all that hard work and endeavor, is genuinely satisfying.
As you put your whole 3D printer together, you can also easily disassemble it. This will help you troubleshoot your machine with more efficiency.

Cons

Building from scratch is not recommended if it’s your first time with a 3D printer.
There are a lot of complications involved and without prior experience, mentally prepare yourself for an immense learning curve and lots of difficulties.
Contrarily, you might end up paying a lot more than an assembled printer or a 3D printer kit if and only if you don’t have a basic understanding of how these machines work.
When building from scratch, you’ll need all the help you can get online. Acknowledge the fact that some questions will have answers and many will not.

However, I’d like to address here about successful scratch-building is that not only will it heighten your sense for 3D printing and printers, but it will also develop your making abilities.

This will happen as you begin to understand the operation of your 3D printer. Subsequently, you will start to become constantly aware of factors that attribute to good quality prints.

You will then be able to better optimize your models to increase your print quality. Building from scratch may have its downsides, but it also has a multitude of benefits undeniably.

How Much Does it Cost to Build a 3D Printer?

From what I’ve read and researched, it turns out that you can build your very own 3D printer for somewhere in the $100-200 range.

Of course, better quality products will cost more and if you want better modifications, you’ll have to pay extra as well.

But as far as a decent, working 3D printer is concerned, you can cut the costs of the traditional approaches and get yourself your own custom-built printer very cheap.

Then again, time and effort weighs in, and this is something that might not appeal to many people at all and come off as a significant downside.

You need to get the following basic parts in order to build, well, a basic 3D printer that functions okay. Next to their names are their approximate prices as well so you could have an idea.

Stepper Motors ($9)
Bowden or Direct Drive Extrusion System ($24)
Printer Frame (varies purely)
Power Supply ($20)
LCD Display Screen ($10-$20)
A Control Board ($22)
A Build Platform ($20)
Wiring Components i.e. Conductors and Insulators ($10)
Limit Switches ($5-$10)
Stepper Drivers ($10)
Linear Rails ($10)
Linear Rods ($5)
Linear Carriages ($5)
Belts ($5)
Threaded Rods ($2-$3)
End Stops ($2-$3)

If you add all of that minus the cost of the printer frame, you get a total sum of something under $160. The next step relates to software – a fundamental component of a 3D printer.

It’s the software that controls your machine, and nothing else. Without it, your 3D printer is good as collecting dust.

Next up is a slicer that slices your design file and makes it understandable for the 3D printer – typically in the form of G-code.

Moreover, the implementation of a slicer is followed by firmware – both of which can be commonly found at no additional expense.

So that’s that. Scratch-building isn’t going to cost you a lot, given that you’re taking your steps in the right direction. What it’s really going to cost you is time, and this decision, therefore, ultimately boils down on you.

Is It Cheaper to Build Your Own 3D Printer?

Technically speaking, yes. It’s definitely much cheaper to build your own 3D printer from scratch when compared to purchasing an assembled 3D printer or a DIY 3D printer kit.

Purchasing 3D printer parts as briefly described above aren’t very expensive. As a matter of fact, the sum of the cost is going to cost you lesser than a full-fledged 3D printer.

Now, if we look at the other option for building a 3D printer, we have the DIY kit.

DIY kits of 3D printers are relatively inexpensive because there’s a degree of mechanical effort allotted to them.

Some aren’t just cut out for doing anything related to building, let alone making a 3D printer from scratch or assembling a DIY kit.

This is why they’d pay good money to get a fully-assembled 3D printer that requires no assembly. Manufactureres, therefore, sell DIY 3D printer kits and assembled ones alike.

If, for instance, we look at the DIY kit of the Prusa i3 MK3S and the assembled edition side by side, there’s a $150 difference between the two. See for yourself here.

Fully-assembled 3D printers or partially assembled ones are priced higher because they’re ready to print as soon as you take them out of the box.

When you factor in the fact that you can always replace your 3D printer parts on your custom built 3D printer, you’re actually saving a lot of money while getting much higher quality as a result.

However, you can also go very wrong with scratch-building, which in turn, will cause you to spend more money than buying a decent 3D printer.

This is why it’s imperative that you stay on the right track when building from scratch. Otherwise, don’t expect to cut down the total cost, rather watch out for dishing out even more.

In conclusion, building your own 3D printer can get cheaper, but beware of quality and time-related risks.

How Cheap Can You Build a 3D Printer?

I was searching around and to my surprise, an article on Instructables claims that one user built a fully functional 3D printer for just $87, which is almost hard to believe.

Well, we suggest you give it a good read because the article also explains how you can build one for yourself in the same manner.

A point to note – prices of 3D printer parts may vary from country to country. The writer said that it had cost him the equivalent to $87 in his region.

So I think the bar of how cheap can you build a 3D printer has been set pretty high.

Do embrace that the user mentioned it took him more than 1 year to fine-tune, design, and build this 3D printer, though he has made it a lot shorter for everyone that is willing to follow the plan.

Anyways, coming back to the topic, given a serious amount of effort, experience, and energy, you can create a good 3D printer for around $100.

Go ahead and probe Amazon for good quality parts that also aren’t costly. To give you a headstart, I’ve gathered the following for you.

Creality Glass Bed
360W Switching Power Supply
SIMAX3D Bowden Extruder
SIMAX3D 17 NEMA Stepper Motors

Is It Hard to Build a DIY 3D Printer?

For first-timers, building a 3D printer can get very frustrating, but if you’ve been in this business for some time and already have a decent amount of experience, you might not face as many problems as beginners.

That said, 3D printer kits from reputable manufacturers such as Creality, QIDI Tech, and Prusa come with truly precise and well-explained instruction manuals so even the most newbies of them all can proceed with the assembly easily.

However, when we talk about scratch-building, there are no manuals, no nothing. It’s just you, your heap of 3D printer parts, and the internet that might or might not have all the answers for your queries.

Considering all that, it again depends on your previous experiences in the 3D printing environment. If this magical realm has seasoned you enough, building a DIY 3D printer might not seem that hard at all.

But if it’s your first time, buying a quality machine upfront is probably your best bet. Some DIY 3D printer kits demand minimal work in assembly, while some may require more effort but have carefully detailed instructions.

You see, it’s not just about sorting parts together when building from scratch. You have to spend a decent amount of time planning beforehand on how you want your printer to turn out.

From what I’ve read, many people fail at this initial phase of building a 3D printer and often ending up mismatching components. This is why thorough and concise research is your best friend for this cause.

How Long Does it Take to Build a 3D Printer?

If we talk about DIY 3D printer kits, typical assembly time takes about 3-6 hours, but it’s possible that it could be done in less. For scratch-building, the whole process can take days, and even months.

The fact of the matter is the average assembly time varies from one DIY kit to the other. Additionally, it also depends on the standard of the instruction manual that has been given along with the kit.

If it’s good quality, you’ll be quickly able to get through your DIY kit. Quite fortunately, before you make the purchase, instruction manuals can be checked out. Keep your eyes open for them.

On the other hand, building from scratch won’t ask much for money, but it’s going to consume your time, all of it.

Deciding on everything, searching for parts, assembling the 3D printer, and calibrating it to near-perfection – one can easily see the amount of struggle here.

But then again, if you know your stuff, have spent your hours tweaking and adjusting, and have immersed yourself in the practicality of 3D printing, scratch-building might be a lot easier than you think.

Now that you’ve read the facts and figures, we leave it up to you to decide what’s it going to be. The DIY kit or building from scratch? Whichever decision you choose whether to build a 3D printer from scratch or get a a DIY kit, I wish you best of luck either way

Building a home 3D printer with your own hands: recommendations from personal experience

3D printing and assembly of 3D printers is my hobby and passion. Here I will not share detailed diagrams and drawings, there are more than enough of them on specialized resources. The main goal of this material is to tell you where to start, where to dig and how to avoid mistakes in the process of assembling a home 3D printer. Perhaps one of the readers will be inspired by applied engineering achievements.

Why do you need a 3D printer? Use cases

I first came across the idea of 3D printing back in the 90s when I was watching the Star Trek series. I remember how impressed I was by the moment when the heroes of the cult series printed the things they needed during their journey right on board their starship. They printed anything: from shoes to tools. I thought it would be great someday to have such a thing too. Then it all seemed something incredible. Outside the window is the gloomy 90s, and the Nokia with a monochrome screen was the pinnacle of progress, accessible only to a select few.

Years passed, everything changed. Around 2010, the first working models of 3D printers began to appear on sale. Yesterday's fantasy has become a reality. However, the cost of such solutions, to put it mildly, discouraged. But the IT industry would not be itself without an inquisitive community, where there is an active exchange of knowledge and experience and who just let them dig into the brains and giblets of new hardware and software. So, drawings and diagrams of printers began to surface more and more often on the Web. Today, the most informative and voluminous resource on the topic of assembling 3D printers is RepRap - this is a huge knowledge base that contains detailed guides for creating a wide variety of models of these machines.

I assembled the first printer about five years ago. My personal motivation to build my own device is quite prosaic and based on several factors. First, there was an opportunity to try to realize the old dream of having your own device, inspired by a fantasy series. The second factor is that sometimes it was necessary to repair some household items (for example, a baby carriage, car elements, household appliances and other small things), but the necessary parts could not be found. Well, the third aspect of the application is "near-working". On the printer, I make cases for various IoT devices that I assemble at home.

Agree, it is better to place your device based on Raspberry Pi or Arduino in an aesthetically pleasing "body", which is not a shame to put in an apartment or take to the office, than to organize components, for example, in a plastic bowl for food. And yes, you can print parts to build other printers :)

There are a lot of scenarios for using 3D printers. I think everyone can find something of their own.

A complex part in terms of drawing that I printed on my printer. Yes, it's just a figurine, but it has many small elements

Ready solution vs custom assembly

When a technology has been tested, its value in the market decreases markedly. The same thing happened in the world of 3D printers. If earlier a ready-made solution cost simply sky-high money, then today acquiring such a machine is more humane for the wallet, but nevertheless not the most affordable for an enthusiast. There are a number of solutions already assembled and ready for home use on the market, their price range ranges from $500-700 (not the best options) to infinity (adequate solutions start from a price tag of about $1000). Yes, there are options for $150, but we, for understandable, I hope, reasons, will not dwell on them.

In short, there are three cases to consider a finished assembly:

when you plan to print not much and rarely;
when print accuracy is critical;
you need to print molds for mass production of parts.

There are several obvious advantages to self-assembly. The first and most important is cost. Buying all the necessary components will cost you a maximum of a couple of hundred dollars. In return, you will receive a complete 3D printing solution with the quality of manufactured products acceptable for domestic needs. The second advantage is that by assembling the printer yourself, you will understand the principles of its design and operation. Believe me, this knowledge will be useful to you during the operation of even an expensive ready-made solution - any 3D printer needs to be serviced regularly, and it can be difficult to do this without understanding the basics.

The main disadvantage of assembly is the need for a large amount of time. I spent about 150 hours on my first build.

What you need to assemble the printer yourself

The most important thing here is the presence of desire. As for any special skills, then, by and large, in order to assemble your first printer, the ability to solder or write code is not critical. Of course, understanding the basics of radio electronics and basic skills in the field of mechanics (that is, "straight hands") will greatly simplify the task and reduce the amount of time that needs to be spent on assembly.

Also, to start we need a mandatory set of parts:

Extruder is the element that is directly responsible for printing, the print head. There are many options on the market, but for a budget build, I recommend the MK8. Of the minuses: it will not be possible to print with plastics that require high temperatures, there is noticeable overheating during intensive work, which can damage the element. If the budget allows, then you can look at MK10 - all the minuses are taken into account there.
Processor board. The familiar Arduino Mega is well suited. I didn't notice any downsides to this solution, but you can spend a couple of dollars more and get something more powerful, with a reserve for the future.
Control board. I'm using RAMPS 1.4 which works great with the Arduino Mega. A more expensive but more reliable board is Shield, which already combines a processor board and a control board. In modern realities, I recommend paying attention to it. In addition to it, you need to purchase at least 5 microstep stepper motor controllers, for example - A4988. And it's better to have a couple of these in stock for replacement.
Heated table. This is the part where the printed element will be located. Heating is necessary due to the fact that most plastics will not adhere to a cold surface. For example, for printing with PLA plastic, the required surface temperature of the table is 60-80°C, for ABS - 110-130°C, and for polycarbonate it will be even higher
There are also two options for choosing a table - cheaper and more expensive. Cheaper options are essentially printed circuit boards with preheated wiring. To operate on this type of table, you will need to put borosilicate glass, which will scratch and crack during operation. Therefore, the best solution is an aluminum table.
Stepper motors. Most models, including the i2 and i3, use NEMA 17 size motors, two for the Z axis and one each for the X and Y axes. Finished extruders usually come with their own stepper motor. It is better to take powerful motors with a current in the motor winding of 1A or more, so that there is enough power to lift the extruder and print without skipping steps at high speed.
Basic set of plastic fasteners.
Belt and gears to drive it.

Examples of elements appearance: 1) MK8 extruder; 2) Arduino processor board; 3) RAMPS control board; 4) motor controllers; 5) aluminum heated table; 6) NEMA 17 stepper motor; 7) a set of plastic fasteners; 8) drive gears; 9) drive belt

This is a list of items to be purchased. Hardcore users can assemble some of them themselves, but for beginners, I strongly recommend purchasing ready-made solutions.

Yes, you will also need various small things (studs, bearings, nuts, bolts, washers ...) to assemble the case. In practice, it turned out that using a standard m8 stud leads to low printing accuracy on the Z axis. I would recommend immediately replacing it with a trapezoid of the same size.

M8 trapezoid stud for Z axis, which will save you a lot of time and nerves. Available for order on all major online platforms

You also need to purchase customized plastic parts for the X axis, such as these from the MendelMax retrofit kit.

Most parts available at your local hardware store. On RepRap you can find a complete list of necessary little things with all sizes and patterns. The kit you need will depend on the choice of platform (we'll talk about platforms later).

What's the price

Before delving into some aspects of the assembly, let's figure out how much such entertainment will cost for your wallet. Below is a list of parts required for purchase with an average price.

Platform selection

The community has already developed a number of different platforms for assembling printers - the most optimal case designs and the location of the main elements, so you do not have to reinvent the wheel.

i2 and i3 are key platforms for self-assembly printer enclosures. There are also many modifications of them with various improvements, but for beginners, these two classic platforms should be considered, since they do not require special skills and fine-tuning.

Actually, illustration of platforms: 1) i2 platform; 2) i3 platform

On the plus side of i2: it has a more reliable and stable design, although it is a little more difficult to assemble; more opportunities for further customization.

The i3 variant requires more special plastic parts to be purchased separately and has a slow print speed. However, it is easier to assemble and maintain, and has a more aesthetically pleasing appearance. You will have to pay for simplicity with the quality of printed parts - the body has less stability than i2, which can affect print accuracy.

Personally, I started my experiments in assembling printers from the i2 platform. She will be discussed further.

Assembly steps, challenges and improvements

In this block, I will only touch on the key assembly steps using the i2 platform as an example. Full step by step instructions can be found here.

The general scheme of all the main components looks something like this. There is nothing particularly complicated here:

I also recommend adding a display to your design. Yes, you can easily do without this element when performing operations on a PC, but it will be much more convenient to work with the printer this way.

Understanding how all components will be connected, let's move on to the mechanical part, where we have two main elements - a frame and a coordinate machine.

Assembling the frame

Detailed frame assembly instructions are available on RepRap. Of the important nuances - you will need a set of plastic parts (I already talked about this above, but I'd better repeat it), which you can either purchase separately or ask your comrades who already have a 3D printer to print.

The frame of the i2 is quite stable thanks to its trapezoid shape.

This is how the frame looks like with parts already partially installed. For greater rigidity, I reinforced the structure with plywood sheets

Coordinate machine

An extruder is attached to this part. The stepper motors shown in the diagram above are responsible for its movement. After installation, calibration is required along all major axes.

Important - you will need to purchase (or make your own) a carriage for moving the extruder and a mount for the drive belt. Drive belt I recommend GT2.

The carriage printed by the printer from the previous picture after it has been assembled. The part already has LM8UU bearings for guides and belt mount (top)

Calibration and adjustment

So, we completed the assembly process (as I said, it took me 150 hours) - the frame was assembled, the machine was installed. Now another important step is the calibration of this very machine and extruder. Here, too, there are small subtleties.

Setting up the machine

I recommend calibrating the machine with an electronic caliper. Do not be stingy with its purchase - you will save a lot of time and nerves in the process.

The screenshot below shows the correct constants for the Marlin firmware, which must be selected in order to set the correct number of steps per unit of measure. We calculate the coefficient, multiply it, substitute it into the firmware, and then upload it to the board.

Marlin 9 firmware constants0022

For high-quality calibration, I recommend relying on larger numbers in measurements - take not 1-1. 5 cm, but about 10. So the error will be more noticeable, and it will become easier to correct it.

Calibrating the extruder

When the frame is assembled, the machine is calibrated, we start setting up the extruder. Here, too, everything is not so simple. The main task of this operation is to correctly adjust the supply of plastic.

If underfeeding, the printed test item will have noticeable gaps, like test die 1. Conversely, the result will look bloated if plastic is overfed (dice 2)

Getting Started Printing

It remains for us to run some CAD or download ready-made .stl, which describe the structure of the printed material. Further, this structure needs to be converted into a set of commands understandable to our printer. For this I use the Slicer program. It also needs to be set up correctly - specify the temperature, the size of the extruder nozzle. After that, the data can be sent to the printer.

Slicer interface

As a raw material for printing, I recommend starting with regular ABS plastic - it is quite strong, products made from it are durable, and it does not require high temperatures to work with. For comfortable printing with ABS plastic, the table must be heated to a temperature of 110-130 ° C, and the extruder nozzle - within 230-260 ° C.

Some important details. Before printing, calibrate the machine along the Z axis. The extruder nozzle should be approximately half a millimeter from the table and ride along it without distortion. For this calibration, a regular sheet of A4 paper inserted between the nozzle and the surface of the heated table is best suited. If the sheet can be moved with little effort, the calibration is correct.

Another thing to keep in mind is the surface treatment of the heated table. Usually, before printing, the surface of the table is covered with something that hot plastic sticks to well. For ABS plastic, this can be, for example, Kapton tape. The disadvantage of adhesive tape is the need to re-glue it after several printing cycles. In addition, you will have to literally tear off the adhering part from it. All this, believe me, takes a lot of time. Therefore, if it is possible to avoid this fuss, it is better to avoid it.

An alternative option that I use instead of scotch tape is to apply several layers of ordinary light beer, followed by heating the table to 80-100 ° C until the surface is completely dry and re-applying 7-12 layers. It is necessary to apply the liquid with a cloth moistened with a drink. Among the advantages of this solution: ABS plastic separates from the table on its own when it cools down to about 50 ° C and is removed without effort, the table does not have to be peeled off, and one bottle of beer will last you for several months (if you use the drink only for technical purposes :)).

After we have collected and configured everything, we can start printing. If you have an LCD screen, then the file can be transferred for printing using a regular SD card.

The first results may have bumps and other artifacts - do not worry, this is a normal process of "grinding" the printer elements, which will end after a few print cycles.

Tips to make life easier (and sometimes save money)

In addition to the small recommendations given in the text above, in this section I will also give a short list of tips that will greatly simplify the operation of a 3D printer and the life of its owner.

Do not experiment with nozzles. If you plan to immediately print from materials that require high temperatures, then it is better to immediately take the MK10 extruder. On MK8, you can "hang" special nozzles that support high-temperature conditions. But such modifications often cause difficulties and require special experience. It is better to avoid this fuss on the shore by simply installing the right extruder for you.
Add starter relay for heated table. Improving the power supply system for this important printing part with a starter relay will help solve the known problem of RAMP 1.4 - overheating of the transistors that control the power of the table, which can lead to failure of the board. I made this upgrade after having to throw away a few RAMPS 1.4s.
Select the correct filament diameter for printing. I recommend using 1.75mm plastic for MK8 and MK10. If we take plastic, for example, 3 mm, then the extruder simply does not have enough strength to push it at an acceptable speed - everything will be printed much longer, and the quality will drop. ABS plastic is ideal for MK8, MK10 will be able to produce products from polycarbonate.
Use only new and precise X and Y guides. Print quality will be affected. It is difficult to count on good quality with bent or deformed guides along the axes.
Take care of cooling. During my experiments with various extruders, the MK10 showed the best results - it prints quite accurately and quickly. The MK10 can also print plastics that require a higher print temperature than ABS, such as polycarbonate. Although it is not as prone to overheating as its younger brother MK8, I still recommend taking care of its cooling by adding a cooler to your design. It must be permanently enabled, this option can be configured in Slicer. You can also add coolers to keep the stepper motors at an acceptable temperature, however, make sure that their air flows do not fall on the printed part, as this can lead to its deformation due to too rapid cooling.
Consider heat retention. Yes, on the one hand, we are struggling with overheating of the elements. On the other hand, a uniform temperature around the printer will contribute to high-quality printing (the plastic will be more pliable). To achieve a uniform temperature, you can put our printer, for example, in a cardboard box. The main thing is to connect and configure the coolers before that, as described above.
Consider insulating your desk. Heated table heats up to high temperatures. And if part of this heat leaves properly, heating the printed part, then the second part (from below) just goes down. To concentrate the heat from the table onto the part, you can perform an operation to insulate it. To do this, I simply attach a cork mouse pad to its bottom using stationery clips.

Pins

I am sure that during the assembly process you will encounter a number of difficulties specific to your project. Neither this text nor even the most detailed guides will insure against this.

As I wrote in the introductory part, the above does not claim the status of a detailed assembly manual. It is almost impossible to describe all the stages and their subtleties within the framework of one such text. First of all, this is an overview material that will help you prepare for the assembly process (both mentally and financially), understand whether you personally need to bother with self-assembly - or give up on everything and buy a ready-made solution.

For me, assembling printers has become an exciting hobby that helps me solve some issues in home and work affairs, take my mind off programming and do something interesting with my own hands. For my children - entertainment and the opportunity to get unusual and unique toys. By the way, if you have children whose age allows them to mess around with such things, such an activity can be a good help for entering the world of mechanics and technology.

For everyone, the vectors of using 3D printers will be very different and very individual. But, if you decide to devote your personal time to such a hobby, believe me, you will definitely find something to print :)

I will be glad to answer comments, remarks and questions.

What to read/see

what can be printed;
3D printer forum;
RepRap community site with model descriptions and assembly instructions;
printer that prints electronics.

Subscribe to the Telegram channel "DOU #tech" so you don't miss new technical articles.

Topics: DIY, embedded, tech

Do-it-yourself 3D printer from an inkjet printer

How to assemble a 3D printer from parts from an inkjet printer?

3D printer is a high-tech and expensive device. If you buy a cheap device, you may encounter poor build quality, fragile components and a short uptime. Having in stock unnecessary, decommissioned, failed inkjet printers and scanners, you can assemble a printing device from their parts to create three-dimensional models.

DIY inkjet 3D printer

If the main factor in choosing a device for printing 3D objects is the cost of the device, it is worth assembling a 3D printer yourself. According to user reviews, cheap models of 3D printed devices made in China have the main drawback - the low quality of components. In particular, guides are the weak point of Chinese devices. These elements are subjected to significant stress, and if they are of poor quality, they can be deformed under the action of tension belts.

Important! In older document printers, the rails are made of hardened steel. They do not bend even with considerable effort. Such details will be an ideal alternative to regular Chinese ones.

By dismantling unnecessary office devices, you can get a set of spare parts necessary for assembling a 3D printer and save a lot on the purchase of components. These are:

printer head slide assembly;
timing belts;
mechanical or optical limit switches;
power supply;
stepper motors and drivers with controllers and other parts.

Attention! Inexpensive inkjet printers were mostly equipped not with stepper motors, but with DC motors with an encoder. Theoretically, they can be used in the assembly of a 3D apparatus by redesigning the latter. Stepper motors are usually extracted from scanners.

But the advantage of DC motors should be noted: they consume electricity only during movement, while stepper motors are constantly supplied with power.

Accessories such as hot end, extruder and control board will have to be purchased. The frame is assembled from improvised materials - plywood, steel corners or parts of the cases of disassembled copiers.

A self-assembled printer will be much cheaper than factory counterparts, but at the same time, it will be of higher quality than budget models presented on the market by Chinese manufacturers.

How to make a 3D printer from an inkjet printer: step-by-step instructions

To work on assembling a printer from donor components, you will need a set of tools and materials:

hacksaw, drill - to make the case;
soldering iron and solder - for mounting electrical cables;
screwdrivers and hex set - for assembling components;
pliers;
multimeter tester - for checking the electrical circuit;
screws and nuts;
cable ties;
electrical tape.

Attention! Knowledge of electronics and engineering is a plus.

Accessories:

steel rails;
timing belts;
micro stepper motors;
stepper motor drivers;
extruder and hotend;
optical sensors - limit switches-microswitches;
power supply;
connection cables;
electronic control board and microcontroller based on Arduino;
LCD display;
desktop glass;
parts for the frame.

Next, you will need to stock up on a fair amount of patience and pedantry - assembly requires careful observance of all instructions.

Assembly process

Fabrication and painting of the frame.
Mounting the X and Y frame axes and fixing the stepper motors to them. The extruder will move along the X axis, the Y axis is needed to move the platform.
Installing the Z axis support rod.
Attaching the extruder.
Connection of heating elements, cables, power supply.
Assembly of electronic elements: boards, microcontroller, LCD display.

After the circuits have been assembled and tested, the software is installed. At the last stage, the working table, the X, Y, Z axes, the temperature of the heating elements and the filament pulling speed are calibrated.

Important! After starting the printer, print a test model. It will show all the flaws in the assembly and settings.

Mistakes and how to avoid them

Printer performance depends on the quality of the installation. But it is not always possible to eliminate errors when assembling the device.

One of the serious mistakes that is often made when assembling the printer with your own hands is the incorrect installation of the frame elements. Even a slight misalignment of the corners will cause jamming when the carriages move. The geometry of the mating parts must be maintained as accurately as possible.
If the body is made of plywood, it is recommended to cut its elements on a CNC laser machine. When assembling a frame from metal corners, it is necessary to control the mating angles of the parts at each stage.
The second common problem is the backlash of the frame elements. In this situation, print quality cannot be achieved. There should be no gaps between the parts. They occur either when the fasteners are loosely tightened, or if the frame elements are poorly prepared, that is, the dimensions are incorrectly maintained.
If the electrical wiring connectors are not of good quality, there will be constant power outages. And the installation of short wires will cause them to break. The length of the wiring must match the dimensions of the frame, taking into account moving parts. It is necessary to check the tightness of the connection of the connectors, thereby minimizing the risk of disconnecting individual components and mechanisms from the power supply.

Quality control of assembly at each stage, checking of all connections and geometry of structural elements will help to avoid problems.

That's interesting! The article discussed how to assemble an FDM printer from improvised materials and parts left after dismantling office equipment. And an engineer from the Netherlands assembled a powder-type 3D printer based on an inkjet printer. As a filament, he used gypsum, sand, metal powder, and filled the cartridge with a binder. Otherwise, the technology is similar to laser layer-by-layer sintering.
Learn more

3D printing show uk

3D printer courses

3D printer synonym

Portabee 3d printer

3D printed diorama

Orthopedics 3d printing

How to use 3d scanner

3D printed aquarium background

Cheap abs 3d printer

File format 3d printer

Mib neuralizer 3d print