(506) 2240-6804
Buy ultimaker 2 3d printer
Start 3D printing the Ultimaker way
Take your first step into our world of easy and seamless 3D printing – with a new touchscreen and remote printing capabilities.
Get pricing
Single extrusion with swappable nozzles
Cloud-enabled remote 3D printing
Filter up to 95% of UFPs (optional)
Print with 9 materials (including PP & PC)
The physical space inside the Ultimaker 2+ Connect that can be used for single extrusion 3D printing.
223 x 220 x 205 mm (8.7 x 8.6 x 8 inches)
The XYZ 3D printer dimensions, including the spool holder and Bowden tubes.
342 x 460 x 580 mm (13.5 x 18.1 x 22.8 in)
This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. It is a form of additive manufacturing technology and the process used by all Ultimaker 3D printers.
Fused filament fabrication (FFF)
The filament diameter that achieves optimal results on Ultimaker 3D printers.
2.85 mm
The net weight of the 3D printer.
10.3 kg (22.7 lbs)
Required power input.
100 - 240 VAC, 50 - 60 Hz
The peak power output that the printer can reach – usually when the heated bed and hot ends are heating up.
A micron is the measurement used to define the thickness of a 3D printed layer. 20 micron is 0.02 mm thick. Thinner layers are used for high-detail prints, thicker layers are great for fast prototypes.
0.25 mm nozzle: 150 - 60 micron
0.4 mm nozzle: 200 - 20 micron
0.6 mm nozzle: 400 - 20 micron
0.8 mm nozzle: 600 - 20 micron
The more accurate the stepper motors within the printer, the greater degree of accuracy and finer resolution can be achieved with each print.
12.5, 12.5, 5 micron
A geared feeder exerts more force on the filament, and also reduces heat exposure from the motor.
Geared feeder
Display
2.4-inch (6 cm) TFT color touchscreen
Thanks to the swappable nozzle, you can easily switch between different nozzle diameters.
This results in higher uptime and easier maintenance of your 3D printer.
Single extrusion with swappable nozzle and dual cooling fans
Smaller nozzle diameters enable more detailed prints, large diameters reduce overall print time. 0.4 mm nozzle included, others sold separately.
0.25, 0.4, 0.6, 0.8 mm
The build speed relates to how fast the filament can be extruded through the hot end of the 3D printer. The higher the value the greater the achievable print speed.
< 24 mm³/s
A wide nozzle temperature range means greater flexibility in the 3D printing material choice.
180 - 260 °C
The nozzle heat-up time relates to how fast you can start printing, as well as how fast it can melt the polymer filament.
< 2 minutes
Thanks to their quiet operation, Ultimaker 3D printers are suitable for use in the office, studio, or classroom environment.
< 50 dBA
Assisted leveling is easy with the Ultimaker 2+ Connect. The setup wizard guides you through the process, using the included calibration card and build plate knobs to ensure the build plate is perfectly level.
Assisted leveling
With a build plate temperature range of 20 - 110 °C, you can be confident of reliable first-layer adhesion with a range of materials
20 - 110 °C heated glass build plate
This Ultimaker 3D printer operates best in locations between these temperatures.
15 - 32 °C (59 - 90 °F)
This Ultimaker 3D printer can be safely stored or left inactive at these temperatures.
0 - 32 °C (32 - 90 °F)
The printer will notify you when the filter needs replacing (every 1,500 print hours – about once per year). Ultimaker 2+ Connect Air Manager sold separately.
Replaceable EPA filter
The Air Manager filter catches, traps, or diffuses up to 95% of ultrafine particles (UFPs). Ultimaker 2+ Connect Air Manager sold separately.
Up to 95% of UFPs
Ultimaker Cura is our industry-leading slicing software that turns your 3D model into a file your printer can use. Use Ultimaker Digital Factory to manage printers and print jobs via your local network or the cloud
Ultimaker Cura
Ultimaker Digital Factory
Software security
Data encryption in transit and at rest.
Two-factor authentication
Supported OS
MacOS, Windows, and Linux
More plugins are available from Ultimaker Marketplace to make your 3D printing experience even easier.
SolidWorks, Siemens NX, Autodesk Inventor
An STL file is the most used file type for 3D printing. Nearly any 3D modeling software program is able to create these files.
Ultimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG
Printable formats: UFP
Print with one click via Wi-Fi or Ethernet connection from UltiMaker Cura or UltiMaker Digital Factory. Or export your print job to a USB stick.
Wi-Fi (2.4 GHz), Ethernet, USB
Certification
CE, Declaration of safe unattended use
More information
Training
Training is available online or via our dedicated network of local service partners.
Register your Ultimaker 2+ Connect for a free, online setup and onboarding tutorial in the Ultimaker 3D Printing Academy.
Warranty period
12 months
Expert support
Market-leading technical support via email, phone, or from our global community is available to you in your language and timezone.
Extended support
Online resources, extensive manuals, material technical and safety data sheets (in multiple languages), a detailed knowledge base, and much more.
Explore the tech behind the Ultimaker 2+ Connect with one of the R&D Engineers who created it. You will learn:
• Every hardware feature and its performance benefits
• How the printer's connectivity enables a more seamless workflow
• The thinking behind key design decisions
• And lots more!
"Last year, we produced around 1,000 different 3D printed parts. The benefits of these are improved ergonomics, productivity, and operator satisfaction. In the end, we get very good feedback from the operators working on the line."
Luis Pascoa, Pilot Plant Manager at Volkswagen Autoeuropa
Read the full story
"So far in the pilots that have ran, we've significantly seen a cost reduction in the functional applications that we've found from 70 - 90%.
On delivery time we've seen the same decrease."Isabelle Haenen, Global Supply Chain Procurement at Heineken
"We chose Ultimaker because the machines are reliable and the results are repeatable. That's important for us, for a stable production process."
Johannes Grimm, Manager Operation Excellence at Carl Zeiss Optical Components
Read the full story
"If you compare our 3D printed tools to conventionally manufactured tools, we can easily save approximately €1,000 per tool, which is of course a lot when you consider all the tools which are needed to produce a vehicle."
Raphael Koch, Research Engineer R&A at Ford Europe
Read the full story
The Ultimaker 2+ Connect gives you access to the entire Ultimaker ecosystem, including:
• Ultimaker Essentials (unending enterprise software subscription)
• Ultimaker Cura (full settings and monitoring compatibility)
• Ultimaker Digital Factory (remote printing and management)
• Ultimaker 3D Printing Academy (e-learning modules)
• A global network of service partners (setup and training)
Ultimaker 2 + 3D Printer Fully Assembled
Sorry, this product is currently unavailable
Alternative products you may be interested in:
- Home
- Store
- Ultimaker 2 + 3D Printer Fully Assembled
The Ultimaker 2+ is everything you loved about the original Ultimaker 2, with a few new innovations to make it better than ever! With a new geared feeder, ability to swap nozzle sizes, and optimized airflow, the Ultimaker 2+ is one of the most advanced, accurate, and reliable desktop 3D printers around.
Once you unbox the printer, you will be up and printing in a matter of minutes.
Remove from wishlist Add to wishlist loading...
Product No. loading...
Notify me when this item becomes available Success You will be notified when ... becomes available. Request A QuoteTo get an instant quote, add everything you need to your cart, and click "Download as quote".
Or use the form below and a MatterHackers expert will contact you within one business day to discuss available discounts, training, and maintenance options.
Product(s)
Email *
Phone
Full Name
Company/Organization
Questions
Success Thank you for your request. We will be in touch shortly.We are excited to be one of the few authorized US resellers of Ultimaker. Ultimaker has developed a global reputation and following for having printers that work very well and require very little tinkering.
The well designed print head on this printer will quietly and accurately build your creation with an accuracy of 20 microns. This leads to a printed part with a very smooth finish without highly visible print lines. The heated bed allows you to print with a variety of materials and rarely needs to be re-calibrated. Start printing large parts today with a build volume of 9 x 9 x 8 inches. This printer comes standard with a 12 month warranty so you can rest easy and know you're covered.
Designed to Simply Work
Once you pull your Ultimaker 2 + out of the box, you're ready to start printing. The Ultimaker 2 + comes with a radial scroll wheel which allows you to make temperature and print speed adjustments during your print. You'll never have to worry about long print jobs - this machine was designed and tested to finish the job without failed prints.
Plenty of Accolades
The original Ultimaker 2 was the winner of the 2014 "Best in Shootout" category from Make Magazine for “Undisputed best scores in print-quality tests”.
This machine is also the Editors Choice for PC Magazine, the "Most Wanted 3D Printer" for 3D Hubs, and was rated "Best Consumer Product" by 3D Printshow.
What's New in the Ultimaker 2 +?
Geared Feeder - This innovative feeder will allow you to quickly swap filament and even choose the correct pressure for your filament.
Swappable Nozzles - The pre-installed Olsson Block allows you to easily switch between 4 different sizes of nozzles (0.25, 0.40, 0.60, 0.80mm)
Optimized Airflow - New fancaps have been installed to perfectly aim airflow below the nozzle from both sides.
What's In The Box?
- Download the User Manual here!
- Ultimaker 2 + 3D Printer
- Swappable 0.25, 0.40, 0.60, 0.80 mm nozzles
- 0.75kg spools of Ultimaker Silver PLA
- SD Card and USB Cable
- Other free extras include: Glue stick, grease, hex wrenches, calibration card, and more!
Ultimaker 2 Plus Tech Specs
Printing Technology - Fused Filament Fabrication
Printing Material - 2.
88mm PLA, 2.88mm ABS, Specialty Materials
Nozzle Speed - 30 - 300 mm/s
Build Volume - 9" x 9" x 8"
Layer Resolution - 0.25 mm nozzle: 150 to 60 micron
0.40 mm nozzle: 200 to 20 micron
0.60 mm nozzle: 400 to 20 micron
0.80 mm nozzle: 600 to 20 micron
Printer Dimensions - 19.37"x 13.46"x 21.97"
Printer Weight - 23.8 lbs
Connectivity - USB, stand alone with SD-card
Printer Software - MatterControl
Input Voltage / Power - 100-240 Volts, at 50/60 Hz 24 v DC @ 9.2 amps
Download the User Manual here!
Note on Filament Compatibility
Ultimaker's PTFE tubing has issues fitting some 3mm filament, depending on their true diameter and/or a wide dimensional accuracy. For PLA and ABS, we highly recommend our PRO Series, which has a true diameter of 2.88mm and an accuracy within 0.05mm.
| List Price: | $ (with add-ons) |
|---|---|
| Price: | $ (with add-ons) |
| Sale Price: | $ (with add-ons) |
| — Available for Pre-order — | |
| Availability: | ... |
| Est. In Stock: ... | |
| Order Now: | Processed ImmediatelyShips = 3500"> Free Shipping TruckFree U.S. Shipping - excludes Alaska and Hawaii |
Arrives after Christmas. Need something sooner? Shop Gift Cards that are digitally delivered instantly.
This item cannot be shipped to a PO Box or APO/FPO/DPO address.
This item takes longer to ship due to its size and/or weight.
Qty
Checkout
Request Quote
Notify me when this is available
3D Printer Ultimaker 2 | Krasnodar
Brief description:
The Ultimaker 2 is a 3D printer that features an updated design and enhanced functionality. Its advantages include increased accuracy, volume and speed of printing, the presence of a modern heated pad, as well as a powerful liquid crystal display and an SD card reader.
Ultimaker 2 - a new word in 3D printing
Advanced design, excellent speed and print volume, high layer accuracy, modern heated pad design, powerful OLED display, SD card support and many other useful features - all this is the Ultimaker 2 3D printer. It is the epitome of energy, technology, power and accessibility for users. With this device, you can successfully engage in small business, education or just your favorite hobby.
nine0005
To date, the community of users of this model has more than 3,000 people around the world. Become a part of the dynamically growing world of Ultimaker 3D printing by purchasing a new generation 3D printer. It provides professional quality in prototyping and model building. The Ultimaker 2 3D printer works best when using Innofil3D PLA 2.85mm filament.
Intelligent operation
The Ultimaker 2 3D Printer Control features a new intuitive wheel for easy operation, a unique OLED multi-function display and a built-in SD card slot. As a result, simulated 3D files can be saved to and printed from an SD card without connecting the Ultimaker 2 3D printer to a computer. The OLED display provides all the necessary information about the state of 3D printing, which can be paused, and any settings can be changed during the printing process (print speed, blowing speed, desktop and material heating temperatures). nine0005
Possible applications
The use of a modern personal 3D printer Ultimaker 2 is very diverse.
Ultimake
r 2 is suitable for educational purposes in schools, colleges and universities, modeling and product design, medical applications, product development and many other segments.
Printing materials
The Ultimaker 2 is capable of printing with all major 2.85mm and 3.00mm 3D filaments.
However, for the best performance of the Ultimaker 2 3D printer, a special premium filament Innofil3D 2.85 mm has been developed, with which the best 3D printing result is achieved.
To print your models, you can choose any color of Innofil3D filament you like, there are more than 20 different colors in the assortment. nine0005
Plastic thread Innofil 3D of European production has the same composition along the entire length of the thread, and hence the same melting point. Printed 3D models are characterized by rich color, which is accurately reproduced when printed.
Layer resolutions, volume and print speed
The large chamber of the Ultimaker 2 3D printer allows you to print 3D objects with a size of 230x225x205 mm.
Users can choose any print resolution, ranging from 20 to 300 microns (0.02 - 0.30 mm). nine0005
In addition, not only the layer resolution, but also the print speed on the Ultimaker 2 3D printer has a wide range: from 30 mm / s to 300 mm / s, while changing the speed even during printing, the quality will not change.
The Ultimaker 2's nozzle has been upgraded to a 0.4mm diameter and dual cooling allows for precise and fast 3D printing.
The desktop of the Ultimaker 2 3D printer is heated, and the table is heated evenly, which allows you to print with any material without using additional tools (adhesive tape, glue, etc.). nine0005
Ultimaker 2 3D printer features:
- glass platform with uniform heating over the entire surface area;
- effective cooling with the help of two active coolers of the working part;
- almost complete absence of noise during operation;
- simple and easy to use thanks to the plug&play standard; nine0098 the highest printing speed - from 30 mm / s to 300 mm / s;
- the highest print resolution among personal 3D printers - up to 20 microns;
- large volume of the working chamber - 230x225x205 mm;
- the possibility of 3D printing with various materials: PLA, ABS, Nylon, Laywood, Laybrick, Flexible, PVA;
- compatibility with MacOS and Windows;
- the presence of a rapidly growing community of Ultimaker users - the YouMagine.
com portal; nine0099 - powerful and clear open source Cura software;
- ergonomic control wheel;
- multifunctional OLED display;
- SD card slot - allows you to print without connecting to a PC;
- the ability to pause printing;
- the ability to change the main print settings during printing: change the print speed and the speed of the coolers, change the temperature of the heating material and desktop; nine0099
- modernized mechanical parts that ensure the strength and reliability of the device, an updated design of the development part;
- the presence of all the necessary holes for installing a second extruder - a new update is planned before the end of 2014
Scope of delivery
The Ultimaker 2 3D printer is securely packaged, already fully assembled, comes with a built-in OLED controller, one extruder from a Dutch manufacturer. Open source software. To ensure the quality of every Ultimaker 2 3D printer, electronics testing and pressure testing are carried out. nine0005
Update
- The possibility of installing a second extruder is already there!
- The Ultimaker 2 3D printer has all the necessary holes for installing the update, which will be available in the coming months.
- Thanks to the second installed extruder, it will be possible to print with two different colors and even two different materials. nine0099
| Name | Ultimaker 2 |
| Printer dimensions | LxWxH: 358x338x389 mm |
| Frame | No |
| Color | Luminous |
| Maximum print size | LxWxH: 230x225x205 mm |
| Platform | Modern heated area (glass) |
| Media | PLA, ABS, LAYWOOD, LAYBRICK, Nylon, Flexible |
| Layer thickness | ~0. |
| Assembly type | nine0002 Fully assembled |
| SD card slot | Yes |
| Power | 110V-240V, 50-60Hz, 120W, 19V |
| Extruder type | nine0002 One extruder |
| SW | Cura |
| Manufacturer | Ultimaker |
| Manufacturer's warranty | 6 months nine0173 |
| Delivery time: | 1-3 days |
02 mm (20 microns)
3D printer ULTIMAKER 2 GO
Cart is empty
Site search
Home / Catalog / 3D Printers / Personal 3D printers / 3D printer ULTIMAKER 2 GO
3 more photos
Click for viewing
Information to the buyer:
- Information on delivery
- Information on payment methods
Additional information about the product, check with our consultants
+7 (8182) 637-737
2 Model features:
A distinctive feature of this model is its size, in fact it is a new, smaller version of the iconic version of the Ultimaker 2 3D printer.
The printer can be used in educational institutions, it is also ideal for home use. The most simple interface, will be clear to everyone. nine0005
Materials used:
PLA plastic is used for printing.
Software:
The Ultimaker 2 Go comes with a software solution called Cura. The manufacturer supplies it with the 3D printer for free.
Product examples:
nine0005
Main features
| Manufacturer | Ultimaker |
| Layer thickness | 20 microns |
| Printable area | 120x120x115 mm |
| Number of printheads | 1 |
| Category: | Personal |
| Manufacturer: | Ultimaker |
| Thread diameter: | 2. 85 mm |
| Country of manufacture: | Netherlands |
| Model: | 3D printer Ultimaker 2 Go |
| Dimensions: | nine0168 258x250x287.5 mm|
| Weight: | nine0168 14 kg|
| Layer thickness: | nine0168 20 micron|
| Print technology: | nine0168 FDM|
| Printable area: | 120x120x115 mm |
| Number of printheads: | 1 |
| Supported materials: | PLA plastic |
| Max print speed: | nine0168 30-300 mm/s|
| Display: | have |
| Nozzle diameter: | 0. |
