Home » Misc » Best 200 3d printer

Best 200 3d printer


Best 3D Printers Under $200 in 2022 (Reliable & Good Quality)

With $200 in hand, it’s entirely possible to pick up a reliable starter 3D printer. To help steer you towards your best options and avoid the duds, we’ve pieced together this guide to the best 3D printers under $200.

Long gone are the days of prohibitive prices for finicky, DIY kits. Nowadays, even entry-level printers produce good quality prints and, more importantly, a painless printing experience. Better yet, resin printers now sell for under $200, making high-resolution printing just about affordable.

Read on for our top picks; each guaranteed to make the most of those $200.

Best 3D Printers Under $200 2022

3DSourced is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Creality Ender 3 – overall top 3D printer for $200

  • Price: $189 — Available at Creality official store here / Amazon here
  • Build volume: 220 x 220 x 250 mm

Few other printers have spawned quite as many clones as the classic Creality Ender 3, a testament to its ongoing appeal to thrifty makers and its position as a benchmark for inexpensive hobby printers. After all, imitation is the sincerest form of flattery.

While an open-source printer teaming with upgrade and tinkering options by design, the Creality Ender 3 veers sharply away from dime-a-dozen budget kit printers in favor of an uncomplicated, semi-assembled build. It nails the basics, handing you the keys to a reliable machine capable of decent print quality.

Turning to specifics, the Creality Ender 3 comes decked out with a 220 x 220 x 250 mm build volume, surprisingly decent for the price with enough space to craft relatively large parts and even multiple quantities of the same. The print-resume function is also worth bringing up, if only because it has no business being equipped on a sub $200 printer. Hats off to Creality for squeezing it in.

Alongside, Creality has thrown in a BuildTak-style heated bed, hitting a peak of 110°C. That’s theoretically enough for ABS if you’re game for tinkering your way to a successful print. The Creality Ender 3 has manual bed leveling, as expected for a printer under $200, and tricky control dial LCD; not ideal, but par for the course here.

If you’re looking for one of the ‘the best’ 3D printers under $200, we have no issues recommending the Creality Ender 3, even though the printer has hit veteran status now. It’s one for beginners eager to claw their way up that steep learning curve, as well as hobbyists limited by a tight budget.

Voxelab Aquila

  • Price: Check price on Amazon here
  • Build volume: 220 x 220 x 250 mm

While the Voxelab Aquila unabashedly channels the Creality Ender 3 in both design and price, there’s enough here to make it a viable alternative to the budget king for beginners. The main reason is that the Voxelab Aquila doesn’t float around the $200 mark but well under, often as low as $160-$170, a small price to pay for a confident little printer that’s a genuine pleasure to use.

It’s fairly remarkable what Voxelab offers for the price. A 220 x 220 x 250 mm build volume provides ample room to craft decently-sized prints, a heated carborundum glass bed shines with both PLA and ABS filament, and a color screen makes for easy navigation. Then there’s a 32-bit silent motherboard, filament auto-feeding, silent stepper motors, and open-source slicer support to cap things off.

Like all printers in this category, there are trade-offs, namely manual bed leveling, SD card connectivity, and hands-on assembly, though miles away from the complexity of piecing together a full-on kit printer. Beginners up for a challenge shouldn’t be put off, and that’s where we see Voxelab Aquila hitting its stride: it’s a superb novice printer that produces surprisingly good prints for the price.

There’s also the Voxelab Aquila X2, fundamentally the same printer, but with a filament sensor thrown in with a slight price jump to match.

Alternatively, for those looking to save a bit more cash, there’s the ultra-budget Voxelab Aquila C2. Voxelab has swapped out the color LCD for a mono display, shifted the supply from underneath to the side, and removed some of the metal plating on the base on the printer.

In our estimation, the savings aren’t worth the downgrade, and you’re better served spending a little more for the full-fat Voxelab Aquila.

Monoprice Mini Delta V2 – Best Fast 3D Printer Under $200

  • Price: Check price on Amazon here
  • Build volume: 110 x 110 x 120 mm

Small but mighty, the Monoprice Mini Delta V2 is a beginner-friendly speed demon, courtesy of Monoprice opting for a Delta design rather than the Cartesian design found on most $200 printers. It’s fast, really fast – 170mm/sec – and won’t break the bank.

Unlike most printers in this price range, the Monoprice Mini Delta V2 ships fully assembled and ready to print. Features like automatic bed leveling, a color touchscreen, Wi-Fi connectivity, and support for PLA and ABS help in that respect, too, removing many of those time-sapping initial stumbling blocks. It’s also anchored to an all-metal frame and prints at a reasonably low 30dBA.

Plug and play appeal aside, the Monoprice Mini Delta V1’s overall print quality is good for the price, aided by a 40‑200 microns resolution suited to delivering strong all-around details and finish. With a tight 110 x 110 x 120 mm build volume, the Monoprice Mini Delta V1 has its limits. Still, for a first printer, primarily used to experiment and learn, there’s enough print area for parts like small figurines, decorative pieces, and modest household items.

While Monoprice is trying to bring a pro-grade printer’s convenience and ease of use to the low-cost category, the Mini Delta V2 has experimentation potential thanks to full open-source slicer compatibility. It pairs beautifully with the likes of Cura, for example.

If you’re nervous about tackling a kit or semi-assembled printer and want easy printing above all else, we highly recommend the Monoprice Mini Delta V2. It’s versatile, and most of all, dirt cheap for what amounts to a robust set of features.

Voxelab Proxima 6.0 – Best Resin 3D Printer Under $200

  • Price: Check price on Amazon here
  • Build volume: 130 x 76 x 155 mm

Flashforge’s decision to pump out budget-friendly printers under the Voxelab name has produced some low-cost gems, not least the Voxelab Proxima 6. 0, one of the few resin printers available for less than $200.

The appeal is clear here: the Voxelab Proxima 6.0 undercuts competing resin printers like the Elegoo Mars 2 while still offering fundamentally the same features, and more importantly, on par overall print quality. For tabletop gamers, collectors, and amateur model makers, it delivers all the precision and fine detail we’ve come to expect from the big entry-level resin players.

You’ll find a boilerplate 6-inch 2K monochrome LCD pushing 50 microns XY resolution, a smack-bang average 130 x 76 x 155 mm build volume, and welcome niceties like a 3.5-inch touchscreen and compatibility with ChituBox, Lychee, and Voxelab’s in-house VoxelPrint slicer, a basic reskin of FlashPrint.

Read more: the best SLA slicers

The Voxelab Proxima 6.0 arrives fully assembled, standard stuff for resin printers. The only barrier to firing up that first print is an assisted bed leveling process that’s quick and over in seconds.

While we’d be the first to recommend low-cost resin printers like the Elegoo Mars 2 and the Anycubic Photon Mono range, there’s no question that the Voxelab Proxima 6.0 offers an almost identical printing experience for less than $200. Beat that, and we’ll reassess, but for the time being, the Voxelab Proxima 6.0 is the best resin 3D printer under $200.

Anycubic Mega Zero 2.0

  • Price: Available on Anycubic official store here / Check price on Amazon here
  • Build volume: 220 x 220 x 250 mm

The new kid on the ultra-budget printer block is another printer born from the Creality Ender 3’s enduring legacy, the Anycubic Mega Zero 2.0. New in the sense that Anycubic has slapped on a 2.0, but a known quantity as it borrows heavily from the shelved original Mega Zero.

The upgrades are there, not least a new heated bed that sees the AnyCubic Mega Zero 2.0 fit for PLA and trickier ABS. It boasts an average 220 x 220 x 250 mm build volume equal to the other printers on our list.

Anycubic has also woven in an easy manual bed leveling system and painless, modular assembly, so even though there’s some hands-on setup, it won’t baffle beginners. The magnetic bed helps the removal of prints, another solid, user-friendly feature worth mentioning.

Overall, it’s a simple, unassuming printer that stretches those $200 to great effect. It’s a gateway printer for those curious about 3D printing but conscious of keeping the wallet-hit to a minimum while making sure a passing interest has the makings of long-term hobby. If you’re looking for something a little different from the Ender 3, not to say something more modern, the Anycubic Mega Zero 2.0 is well worth considering.

Buyer’s Guide- Things To Consider

3D Printer Technology

By virtue of sitting on the lower end of the 3D printer pricing scale, the best 3D printers use one of two printing technologies.

FDM

Fused deposition modeling is an additive technology whereby an extruder heats filament and deposits it layer by layer to create a print. Most, if not all, sub $200 printers employ FDM technology. Generally, FDM printers offer layer resolutions of around 100 microns.

Resin

Resin printers use a targeted UV light source applied to photo-sensitive liquid resin to cure or form a print layer by layer. The best resin 3D printers under $300 offer layer resolutions below 50 microns for parts with higher precision, finer details, and smoother finish than FDM printers.

Resin printers priced under $200 are generally less common than FDM due to the complexity and higher cost of the underlying technology.

Material Types

At $200, it’s worth keeping in mind that material compatibility is limited. Most FDM printers can handle PLA and possibly ABS, but the options are slim beyond that.

PLA, or polylactic acid, is a thermoplastic with a low melting point and is arguably the easiest material to print for hobbyists and amateurs. It’s suited to decorative parts, low-stress household items, and rapid prototyping. It’s flexible, odorless, biodegradable, and affordable.

ABS, or Acetonitrile Butadiene Styrene, is a tough, durable thermoplastic with a relatively high melting point. Makers favor ABS for parts subject to stress, weathering, and repeated use. ABS is inexpensive but trickier to print and produces smelly fumes that can be harmful when inhaled.

Resolution and Layer Height

Although there are many factors at play when it comes to the resolution of a print, layer height offers a quick-glance estimate of a printer’s precision. For FDM printers under $200, 100 microns is standard and sufficient for a good overall print quality. 50 microns and below are typical for resin printers, enough for feature-rich parts.

Build Volume

When shopping around for a 3D printer, be sure to consider the build volume on offer. Build volume indicates the maximum size print a machine can produce. 

In the $200 range, you’ll find average-sized build volumes roughly around 220 x 220 x 250 mm, matching the specifications of the Ender 3. This grants enough room for a good range of 3D parts, including household items, multiple of the same small part, models, toys, and more. 

Resin printers have a much smaller build volume, offset by printing higher quality parts with more detail and accuracy.

Open and Enclosed Frame/Chamber

Other than enclosed resin printers, all $200 3D printers feature an open frame design due to the lower manufacturing costs. In practice, this means the parts are readily accessible, helpful for tinkering, modifications, and upgrades.

There are downsides, most pronounced when printing with ABS, which ideally require an enclosed chamber to maintain stable ambient temperatures. When ABS cools too quickly, the material is prone to warping and curling. An enclosed chamber helps mitigate these errors by slowing the cooling process.

Bed Leveling

Most 3D printers under $200 have manual or assisted bed leveling, requiring some hands-on time with the printer for proper calibration. There are outliers such as the Monoprice Mini Delta, but this is down to the Delta design rather than a concerted decision on the manufacturer’s part to implement the technology.

FAQs

What Is The Best 3D Printer Under $200?

Nothing beats the classic Creality Ender 3. It’s a known quality with a massive community of devoted makers to back it up and help with any issues, upgrades, or modifications. The Voxelab Aquila comes in a close second for a solid balance between affordability and performance for something with a modern twist.

What Is The Best FDM 3D Printer/Kit Under $200?

The printers listed above are all strong picks, and they all come highly recommended. But, gun to our head, we’d once again suggest the Creality Ender 3 for most. Otherwise, for those that favor convenience, the Monoprice Mini Delta simplifies the printing process for first-timers and has you printing in minutes.

What Is The Best SLA/Resin 3D Printer Under $200?

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

You may also be interested in other price range 3D printers:

  • Best 3D printers under $300
  • Best 3D printers under $500
  • Best 3D printers under $1000
  • Best 3D printers under $2000

The Best 3D Printers under US$200

Welcome to the Thomas guide to the best 3D printers under US$200 2022. Thomas has been connecting North American industrial buyers and suppliers for more than 120 years. When you purchase products through our independent recommendations, we may earn an affiliate commission.

If you're interested in trying your hand at a little 3D printing at home, or perhaps you're on the hunt for early Christmas presents, we've compiled this list of the best 3D printers under US$200 on Amazon. We recently wrote about the best 3D printers under US$300, and, after scouring the market, were pleasantly surprised to note that there are a lot of great starter 3D printers that are even more budget-friendly.

An automatic 3D printer printing a product

Image credit: Shutterstock/Kyrylo Glivin

3D printing is known as "additive manufacturing" or "rapid prototyping" in industry settings and is the production—or "printing"—of prototypes, layer by layer, via a computer-aided design (CAD) file. 3D printers for home use are becoming more and more prevalent, with many people getting on board and enjoying printing their own items from the comfort of their own home. There's something quite satisfying about being able to print up anything you need—from spare parts for repairing broken items, to cup holders or bottle openers—in just a few moments. What used to be science fiction, is now a daily part of life, and for as little as a couple of hundred bucks.

What's the Best 3D Printer Under US$200?

While top 3D printers can go up into the thousands of dollars, for simple home use there are plenty of models under US$200 that can serve their purpose. We've found the best 3D printer for kids, the best budget 3D printer, the best desktop 3D printer—and many more—all under US$200. Scroll down to see our top picks for the best 3D printer under US$200 according to happy shoppers.

Thomas’ Top Picks for the Best 3D Printer under US$200 2022

Best 3D Printer Under US$200 in 2022: Anycubic 3D Printer | Buy Now

Best-Rated 3D Printer Under US$200: Elegoo 3D Printer | Buy Now

Best Most Affordable 3D Printer: Kingroon 3D Printer| Buy Now

Best 3D Printer on Sale: Creality 3D Printer | Buy Now

Best Large 3D Printer under US$200: Longer 3D Printer| Buy Now

Best Mini 3D Printer: Phrozen 3D printer| Buy Now

Best Desktop 3D Printer: Entina Mini 3D Printer| Buy Now

Best 3D Printer for Children and Beginners: Tecqeq 3D Printer| Buy Now

Best 3D Printer Pen: 3Doodler| Buy Now

Scroll down to read more about these top picks for the best 3D Printer under US$200, according to many happy buyers.

*Prices listed in this article were as shown in US$ on Amazon.com (USA) as of October 2022

1. Best 3D Printer Under US$200—Anycubic 3D Printer

For a quick start, easy setup, assembly, and leveling, and software that is extremely user-friendly, the Anycubic Photon UV LCD 3D Printer is the way to go. Allowing you to print products with intricate detailing, this 3D printer tops the list for the best 3D printer under US$200 in 2022, and it's currently on sale with US$100 chopped off the original price. One of the 1,400-plus reviewers wrote, "The prints are incredible. They look store-bought. If you need small detailed parts or wish to do minis, create and print your own chess pieces, the sky's the limit."

Specifications

Material: Metal

Color: Yellow/Black

Weight: N/A

BUY NOW: US$279. 99, Amazon

2. Best-Rated 3D Printer Under US$200—Elegoo 3D Printer

The Elegoo Mars UV photocuring 3D printer is an impressive printing machine that comes semi-assembled, saving you the hassle of spending extensive time researching setup. Its 3.5-inch color touch screen, advanced photocuring technology, quick print time, mere five-minute warmup time, and an option to hollow out prints before slicing to effectively save resin, are just some of the reasons over 1,700 Amazon reviewers are raving about it. A common theme in reviews is the intricate detailing in its prints, and the extremely low price.

Specifications

Material: Aluminum, resin

Color: Mars 2

Weight: 16.46 Pounds

BUY NOW: US199.99 (Was US$259.99), Amazon

3. Most Affordable 3D Printer—Kingroon 3D Printer

It's understandable that you may not want to spend much on a 3D printer if you're just starting out, so the Kingroon DIY Aluminum Resume Printer is a great choice. At just under US$180, this economical 3D printer should not be judged by its price. It comes with a preloaded assisted level MicroSD card with printable 3D models that are the perfect entry into the 3D printing world, and the user-friendly touch screen makes operation a piece of cake. As regards assembly and leveling, one user explained that it was "super easy. I did it with my six-year-old daughter helping me in about 20 minutes [by] reading the instructions. The leveling process was incredibly easy, thanks to the guided leveling that was built into the printer."

Specifications

Material: Aluminum

Color: Black/KP3S

Weight: 16.2 Pounds

BUY NOW: US$179.99, Amazon

4. Best 3D Printer on Sale—Creality 3D Printer

At almost half price, this Amazon's Choice 3D printer is a steal. On sale for under US$200, the Creality LD002R LCD Resin 3D printer, with air filtering system, 3. 5-inch "Smart Touch" full-color screen, fast slicing software, high precision and resolution, and quick leveling, is—according to one happy customer—a "Solid printer for a beginner." The review continues, "Bought this with zero clues on what to do with resin printing — now I have made about a grand on my Etsy shop... Ended up buying a second one about four days [after purchase] because it had already paid for itself. It hasn't failed me yet."

Specifications

Material: Resin

Color: Black/Orange

Weight: 15.43 Pounds

BUY NOW: US$199, Amazon

5. Best Large 3D Printer under US$200—Longer 3D Printer

Another Amazon's Choice product, the Longer LK4 3D Printer, with 2.8-inch touch screen, resume-printing function (for if the power goes out mid-print), fast heating hot-bed, and a built-in safety power supply, is quite a remarkable machine for the price. It comes almost fully pre-assembled so you can get printing ASAP, and has the space (220x220x250mm) and capacity to print large objects, allowing you to let your imagination run wild.

Specifications

Material: Metal

Color: Black

Weight: 119.3 Pounds

BUY NOW: US$214.82 (Was US$247.43), Amazon

6. Best Mini 3D Printer—Phrozen 3D Printer

If you're not a fan of the big and bulky, the fast-printing Phrozen Sonic Mini will take up all of 13x10 inches of space on your desk or workshop countertop—and it's easy on the eye, too! This resin 3D printer has a user-friendly operating system, offline printing function, and uses parallel UV LED technology for premium accuracy and quality. It can get to work in just five minutes, and doesn't need much maintenance. One user explains, "Phrozen has reduced costs by using plastic for the chassis and other elements instead of metal. .. This printer is fast, it's lightweight, and the cost is very attractive."

Specifications

Material: Resin

Color: Red/Black

Weight: 12.47 Pounds

BUY NOW: US$129.99 (Was US$269.99), Amazon

7. Best Desktop 3D Printer Under US$200—Entina 3D Printer

At just 8.3''x8.3''x11.4'' inches in size, and weighing in at a petite 6.61 lbs, a good choice for the best mini 3D printer, the lightweight and portable Entina Mini Tina 2, is the perfect desktop addition. Made with 3D-printing beginners, and children in mind, it comes practically fully pre-assembled, equipped with 2.4" LCD screen and Wiibulider slicer software that makes it easy to conduct offline printing using the MicroSD Card., a removable magnetic build plate, a resume-printing function, and a one-year warranty.

One customer wrote "If you want to get your feet wet with 3D printing this is perfect. Also amazing for kids who will love it. Highly recommend.", it even can be as a family project "Works great and helps kids and parents learn how to set up 3D printing and how these printers work. It's pretty cool to print something out of plastic filament!"

Specifications

Material: Plastic

Color: Grey

Weight: 6.61 Pounds

BUY NOW: US$149, Amazon

8. Best 3D Printer for Children and Beginners—Tecqeq 3D Printer

A 3D printer is invaluable for children's educational purposes, i.e. science projects. This Tecqeq mini desktop 3D printer which costs under US$120 is perfect for kids to start their STEM journey. Assembly is quick, it's extremely user-friendly, and also very quiet. "My son and I have pushed this into some pretty complex models with terrific results. Fun fun fun, and a low price point to buy into. " reads one review. "Setup was easy and only took a few min. My son is super excited to have his owe printer."

Specifications

Material: Pla

Color: Black/Orange

Weight: 3.09 Pounds

BUY NOW: US$89.99 (Was US$119.99), Amazon

9. Best 3D Printer Pen—3Doodler

Not quite ready for a whole 3D printing machine just yet? Not to worry; the 3Doodler Create+ 3D printing pen is the ideal way to get into 3D printing, and, at just $80, is quite a bargain considering you can 3D "doodle" anything you like. Extremely easy to use, the kit comes with everything you need to get started, including three plastic refill packs, stencils, and maintenance tools. One of the almost 1,000 reviews reads, "This takes creativity to a whole new and different level. You lift your pen off the paper and go into the 3rd dimension. .. up!... I am a very happy customer, and very impressed with the quality of the product, how it flows, and looks."

Specifications

Material: Plastic

Color: Black

Weight: 1 Pound

BUY NOW: US$59.99 (Was US$79.99), Amazon

Best 3D Printers under US$200—Summary

The Anycubic Photon UV LCD 3D Printer tops our list for the best 3D printer under US$200 in 2022, and, with over 2,500 Amazon reviews, the Elegoo Mars UV photocuring 3D printer comes in at a close second. We hope our review of 3D printers has been helpful. For more 3D printers and other 3D printing suppliers, including 3D printer filaments suppliers, additive manufacturing suppliers, 3D photographic printing services, and 3D sand printing additive manufacturing, consult our additional guides or visit the Thomas Supplier Discovery Platform.

Other 3D Printing Articles

  • Top 3D Printing Services Companies in the USA
  • Origins of 3D Printing and Additive Manufacturing
  • Overview of 3D Printing Technologies
  • Top 3D Printing Manufacturers and Suppliers (Publicly Traded and Privately-Owned)
  • Top Suppliers of Additive Manufacturing Consulting Services
  • All About Material Jetting
  • All About Multi Jet Modeling (MJM) 3D Printing
  • All About Fused Deposition Modeling
  • All About Stereolithography 3D Printing
  • All About Photopolymerization
  • All About Sheet Lamination/Laminated Object Manufacturing
  • All About Electron Beam Additive Manufacturing
  • All About Direct Energy Deposition 3D Printing
  • All About Binder Jetting 3D Printing
  • All About Powder Bed Fusion 3D Printing
  • All About Direct Metal Laser Sintering 3D Printing
  • All About Selective Laser Sintering 3D Printing
  • All About Selective Laser Melting 3D Printing
  • All About Selective Heat Sintering 3D Printing
  • All About Digital Light Processing 3D Printing
  • All About Continuous Liquid Interface Production

Other Best Product Articles

  • The Best 3D Printers under $300
  • The Best 3D Printing Software
  • The Best 3D Printer Under $1000
  • The Best 3D Printer Under $500

More from Custom Manufacturing & Fabricating

Best 3D Printers Under $200 in 2022 (Reliable and Quality)

With $200 on hand, it's possible to get a solid starter 3D printer. To help you choose the best options and avoid setbacks, we've put together this guide to the best 3D printers under $200.

Gone are the days of exorbitant prices for complex DIY kits. Today, even entry-level printers produce good quality prints and, more importantly, pain-free. What's more, resin-based printers sell for under $200, making high-resolution printing practically affordable.

Read on for our top printers, each guaranteed to make the most of that $200.

Contents

  1. Creality Ender 3 is the best 3D printer under $200
  2. Voxelab Aquila
  3. Monoprice Mini Delta V2 is the best fast 3D printer under $200
  4. Voxelab Proxima 6.0 is the best sprinter3D molar $200
  5. Anycubic Mega Zero 2.0
  6. Buyer's Guide - Things to Consider
  7. Technology 3D printer
  8. Types of materials
  9. Resolution and layer height
  10. Assembly volume
  11. Open Rama/Camera
  12. Redding Lodge
  13. Questions/Answer

Creality Ender 3-Best 3D-printer for Dwain dollars

  • Price: $189 - Available in the official store
  • Assembly volume: 220 x 220 x 250 mm

Few other printers have spawned as many clones as the classic Creality Ender 3, testifying to its continued appeal to budget-conscious manufacturers and its position as the benchmark for affordable hobby printers. After all, imitation is the best form of flattery.

As an open source printer with many upgrades and customization options, the Creality Ender 3 veers sharply from budget 10 cent printers in favor of a simple, semi-assembled build. It lays the groundwork, giving you the keys to a reliable machine that delivers decent print quality.

Getting specific, the Creality Ender 3 has a working volume of 220 x 220 x 250mm, which is surprisingly decent for the price and has enough room to make relatively large parts and even multiple batches of such parts. The Resume Print feature is also worth mentioning, if only because it doesn't fit on a sub-$200 printer. I take my hat off to Creality for adding it.

Along with this, Creality installed a BuildTak-style bed heater that reaches a peak temperature of 110°C. In theory, this is enough for ABS if you are ready for a successful print. The Creality Ender 3 has manual bed leveling, as you'd expect for a sub-$200 printer, and a tricky LCD display with control dial; not perfect, but quite common.

If you're looking for one of the "best" 3D printers under $200, we have no problem recommending the Creality Ender 3, despite the fact that the printer is now a veteran printer. It will suit both beginners who want to work their way up the steep learning curve, and amateurs on a budget.

Voxelab Aquila

  • Price: Ask for price on Amazon
  • Assembly volume: 220 x 220 x 250 mm

While the Voxelab Aquila shamelessly copies the Creality Ender 3 in both design and price, there's enough here to make it a viable alternative to the budget king for beginners. The main reason is that the Voxelab Aquila doesn't cost $200, but much less, often as low as $160-$170 - a small price to pay for a small, confident printer that's really fun to use.

It's pretty remarkable what Voxelab offers at this price point. The build volume of 220 x 220 x 250mm provides enough room to produce decent-sized prints, the heated carborundum glass layer shines with both PLA and ABS filament, and the color screen makes it easy to navigate. To top it off, there's a 32-bit silent motherboard, automatic material feed, silent stepper motors, and support for open source slicers.

Like all printers in this category, there are trade-offs here, namely manual bed leveling, the ability to connect an SD card and manual assembly, although it is far from the complexity of building a full-fledged printer from a kit. Beginners looking to challenge should not despair, and this is where we see the Voxelab Aquila hit its stride: it's an excellent beginner printer that produces surprisingly good prints for the price.

There is also a Voxelab Aquila X2, essentially the same printer, but with a filament feed sensor and a slight price increase.

As an alternative for those looking to save a little more money, there's the ultra-budget Voxelab Aquila C2. Voxelab replaced the color LCD with a mono display, moved material feed from under the printer to the side, and removed some of the metal coating on the base of the printer.

In our estimation, the savings are not worth the cut, and it's better to spend a little more on a full-fledged Voxelab Aquila.

Monoprice Mini Delta V2 is the best fast 3D printer under $200

  • Price: Check price on Amazon
  • Assembly volume: 110 x 110 x 120 mm

The small but powerful Monoprice Mini Delta V2 is a speed demon for beginners, thanks to Monoprice's choice of a delta-style design rather than the cartesian design of most $200 printers. It's fast, really fast - 170mm/sec - and won't break the bank.

Unlike most printers in this price range, the Monoprice Mini Delta V2 comes fully assembled and ready to print. Features such as automatic stock leveling, a color touch screen, Wi-Fi connectivity, and PLA and ABS support also help in this regard, removing many of those initial time-consuming hurdles. It is also mounted on an all-metal frame and prints at a fairly low noise level of 30 dBA.

The print quality of the Monoprice Mini Delta V1 is generally good for the price, aided by a resolution of 40-200 microns for strong detail and finish. With a small displacement of 110 x 110 x 120 mm, the Monoprice Mini Delta V1 has its limitations. However, for a first printer used primarily for experimentation and teaching, the printable area is sufficient for details such as small figurines, decorative items, and modest household items.

While Monoprice is trying to bring the convenience and ease of use of a professional-grade printer to the low-end category, the Mini Delta V2 has the potential to experiment with full compatibility with open source slicers. For example, it goes well with Cura.

If you are wary of handling a kit or semi-assembled printer and want ease of printing above all, we highly recommend the Monoprice Mini Delta V2. It is versatile and, most importantly, very cheap with a large feature set.

Voxelab Proxima 6.0 is the best resin 3D printer under $200

  • Price: Check price
  • Assembly volume: 130 x 76 x 155 mm

Flashforge's decision to make budget printers under the Voxelab brand has resulted in several inexpensive gems, not least the Voxelab Proxima 6. 0, one of the few resin printers available for under $200.

The appeal of this model is clear: the Voxelab Proxima 6.0 is cheaper than competing resin printers such as the Elegoo Mars 2, yet offers virtually the same features and, more importantly, overall print quality on par. For desktop gamers, collectors and modeling enthusiasts, it delivers all the precision and fine detail we've come to expect from large entry-level resin printers.

You'll find a standard 6" 2K monochrome LCD with 50 micron XY resolution, an average volume of 130 x 76 x 155mm, plus nice touches like a 3.5" touchscreen and compatibility with ChituBox, Lychee and its own slicer VoxelPrint, a basic rewrite of FlashPrint.

Voxelab Proxima 6.0 comes fully assembled - standard kit for resin printers. The only obstacle to starting the first print is the bed leveling process, which is fast and takes a matter of seconds.

While we'd be the first to recommend inexpensive resin printers like the Elegoo Mars 2 and Anycubic Photon Mono, it's undeniable that the Voxelab Proxima 6. 0 offers an almost identical printing experience for less than $200. We'll come back to this point, but the Voxelab Proxima 6.0 is the best resin 3D printer under $200 right now.

Anycubic Mega Zero 2.0

  • Price: Available at the official Anycubic
    • store
  • Assembly volume: 220 x 220 x 250 mm

The new kid in the ultra-budget printer block is yet another printer born from Creality Ender 3's enduring legacy, the Anycubic Mega Zero 2.0. New in the sense that Anycubic has stuck 2.0, but known as it heavily borrows from the original Mega Zero.

Upgrades are present, not least a new heated bed that makes AnyCubic Mega Zero 2.0 suitable for PLA and more complex ABS. It boasts an average volume of 220 x 220 x 250mm, on par with other printers on our list.

Anycubic has also provided a simple manual bed leveling system and painless modular assembly, so even though printer setup requires some effort, it won't confuse newbies. The magnetic bed makes it easy to remove prints, another reliable and convenient feature worth mentioning.

Overall, this is a simple, unfussy printer that does a great job at $200. This is a pass-through printer for those who are interested in 3D printing but want to keep costs to a minimum so that a fleeting interest turns into a long-term hobby. If you're looking for something different from the Ender 3, let alone something more modern, the Anycubic Mega Zero 2.0 deserves a look.

Buyer's Guide - Things to Consider

3D Printer Technology

At the bottom of the 3D printer price scale, the best 3D printers use one of two printing technologies.

FDM

Fused deposition modeling is an additive technology in which an extruder heats up filament and applies it layer by layer to create a print. Most, if not all, sub-$200 printers use FDM technology. As a rule, FDM printers provide a layer resolution of about 100 microns.

Resin

Resin printers use a directional UV light source that is applied to a photosensitive liquid resin to polymerize or print layer by layer. The best resin 3D printers under $300 offer sub-50 micron layer resolution to produce parts with higher precision, fine detail, and a smoother finish than FDM printers.

Sub-$200 resin printers are generally less common than FDM due to the complexity and higher cost of the underlying technology.

Material Types

At $200, be aware that material compatibility is limited. Most FDM printers can work with PLA and possibly ABS, but the options are limited beyond that.

PLA, or polylactic acid, is a thermoplastic with a low melting point and perhaps the easiest material to print for hobbyists and hobbyists. It is suitable for making decorative parts, low-effort household items, and rapid prototyping. It is flexible, odorless, biodegradable and affordable.

ABS, or Acetonitrile Butadiene Styrene, is a strong, durable thermoplastic with a relatively high melting point. Manufacturers prefer ABS for parts subject to stress, weathering and repeated use. ABS is inexpensive, but harder to print, and emits stinking fumes that can be harmful if inhaled.

Resolution and Layer Height

Although print resolution depends on many factors, layer height provides a quick indication of printer accuracy. For FDM printers under $200, 100 microns is the standard and sufficient for good overall print quality. 50 microns and below are typical for resin printers and sufficient for multifunctional parts.

Build Volume

When choosing a 3D printer, be sure to pay attention to the build volume. The build volume indicates the maximum print size that the device can produce.

In the $200 range, you'll find an average build volume of approximately 220 x 220 x 250mm, which matches the specifications of the Ender 3. That's enough to make a wide range of 3D parts, including household items, multiple identical parts, models, toys, and more.

Resin printers have a much lower build volume, which makes up for it by printing higher quality parts with more detail and accuracy.

Open and Closed Frame/Chamber

With the exception of the enclosed resin printers, all $200 3D printers have an open frame design due to the lower manufacturing cost. In practice, this means that the parts are easily accessible, which is useful for rework, modification and modernization.

There are also disadvantages, most pronounced when printing with ABS, which ideally requires a closed chamber to maintain a stable ambient temperature. When ABS cools too quickly, the material is susceptible to warping and curling. A closed chamber helps mitigate these errors by slowing down the cooling process.

Bed Leveling

Most 3D printers under $200 have manual or assisted bed leveling, which requires some printer time to calibrate properly. There are exceptions, such as the Monoprice Mini Delta, but this is more due to the design of the Delta than a deliberate decision by the manufacturer to implement this technology.

Q&A

What is the best 3D printer under $200?

Nothing compares to the classic Creality Ender 3. It's a renowned quality with a huge community of dedicated creators ready to support it and help with any issues, upgrades or modifications. The Voxelab Aquila comes in close second in the balance between affordable price and performance for something modern.

What is the best FDM 3D printer/kit under $200?

All of the printers listed above are strong choices and all are highly recommended. But without hesitation, we would suggest the Creality Ender 3 again. Otherwise, for those who prefer convenience, the Monoprice Mini Delta will simplify the printing process for beginners and let you print in minutes.

Best 3D printers of 2022 | Rating of TOP models of 3D printers for printing

Contents [Show]

The modern market of additive equipment offers many options for 3D printing equipment designed to solve various problems. Devices are in demand in engineering and design, architecture, medicine, industry, education, entertainment, engineering and many other fields.

Let's talk about what you should pay attention to when choosing a 3D printer, and also consider the rating of the best equipment models for amateurs and professionals in 2022.

How to choose the right 3D printer

There are a number of basic parameters that you need to pay attention to when choosing a printer for bulk printing. Let's briefly consider each of them.

Printer type

According to the ISO / ASTM 52900: 2021 standard, approved by the International Organization for Standardization, 3D printers are divided into several categories depending on the characteristics of the printing process (for convenience, we will duplicate the trade names for each category):

  1. DED (SLS, MJF) - deposition and melting of material using a directed electron or laser beam.
  2. BJT (CJP, NPJT) - selective jet application of a binder composition to the powder for its sintering.
  3. MJT (MJP) - Layered inkjet application of photopolymer resin.
  4. MEX (FDM, FFF, PJP) - layer-by-layer application of the consumable through a heated nozzle (extrusion).
  5. VPP (SLA, DLP, LCD, CDLP) - photopolymerization, selective curing of a liquid photopolymer in a bath under the influence of a light source.
  6. SHL (LOM, Composite Lamination) - gluing (laminating) sheets of material.
  7. PBF (SLM, DMLS, EBM) - fusion of certain areas of the powder layer under the influence of thermal energy.

Approval

This parameter largely depends on the printing technology and is standardly described in the vertical and horizontal planes (Z and XY, respectively).

The Z resolution is the height/thickness of the layer. The thinner the layer, the more accurate and detailed the model will be. XY resolution is the smallest possible movement of the print head, which cannot be less than the diameter of the nozzle or laser beam.

The highest resolution is provided by photopolymer 3D printers.

Compatible materials

The choice of consumable depends on the 3D printing technology used. FDM printers use special thermoplastics in the form of filaments (PLA, HIPS, ABS, PET, PETG, Wood, Flex, etc.), while photopolymer printers use various light-sensitive liquid resins. Sintering technology devices are designed to use engineering thermoplastics or metals in powder form.

Many professional printers work with special purpose materials - composites (glass-filled materials, carbon fiber, etc.), metals, wood, concrete, ceramics, dental photopolymers, wax, etc.

Print platform (desktop, build platform)

This is the plate on which objects are printed. A high-quality platform ensures reliable adhesion of models to the surface (adhesion) during printing and at the same time makes it easy to separate them at the end of the process.

Typically, the print bed is made of glass, but other materials can also be used. To improve the contact of the material with the platform, special sprays and adhesives increase adhesion (Adhesion). Professional models of 3D printers usually have features that increase the resistance of printing to failures:

  • flexible, removable or magnetic platform;
  • automatic print area alignment system;
  • heated platform for handling high temperature materials.

Security

3D printing can be associated with some risks even when all safety regulations are followed. For example, high-temperature printing increases the risk of burns, and some powder materials or photopolymer resins are harmful to the skin.

To reduce the risk of exposure to toxic substances, some printers recommend the use of protective chambers, air filtration and ventilation systems, protective gloves, and goggles. There are also models of 3D printers designed to be serviced exclusively by trained personnel.

Noise level and motor drivers

Drivers and stepper motors directly affect the noise level during equipment operation. More advanced and expensive drivers, coupled with high-quality stepper motors, contribute to a significant reduction in the noise level during the printing process.

Self assembly

Most manufacturers offer additive devices that are ready to go. But some models of 3D printers are presented as self-assembly kits (DIY kits). When buying, you need to consider that assembling such a device can cause certain difficulties, especially for the first time.

Product size

The choice of the area of ​​the working area of ​​the equipment depends on the dimensions of the parts that are planned to be printed on a 3D printer. For a home, it is enough to purchase a device with parameters up to 200x250x200 (WxHxD). This is enough to solve most problems. For more serious tasks, we recommend considering models with a working area of ​​at least 306x306x610 (WxHxD), such a print volume will allow you to print large objects without subsequent gluing with the same print quality and resolution.

Technology

Let's take a closer look at the main technologies used in the field of 3D printing:

  1. FDM is a method of layer-by-layer deposition of plastic filament threads. Ideal for creating functional prototypes and parts from high-strength industrial plastics.
  2. DLP - layer-by-layer curing of photopolymer resins using LED projectors. Allows you to produce ultra-precise, highly detailed objects with a high-quality surface.
  3. SLA - curing layers of liquid photopolymer using a laser beam. Suitable for printing very precise products with complex geometry and fine details.

Multicolour printing

There are modifications of printers that support the function of printing in two or more colors. Most of these FDM devices are equipped with two presses filled with threads of different colors. A separate file is used to print each color, and sections of different colors are combined with each other like a three-dimensional puzzle. There are also color powder printing technologies, such as CJP or MJM, but the range of their application is limited to simple layout or prototyping.

Print surface

The surface quality of finished models depends on both the technology used and the print resolution. If necessary, the products are easily amenable to post-processing.

Housing type

Volumetric printers are available in an open or closed case. Open type devices are cheaper, but may have print quality issues and shrinkage of ABS products due to temperature differences. Enclosed printers have a more rigid, stable design and deliver high quality builds because their print surface is protected from dust and other unwanted particles. In addition, they have a low noise level and are safer to operate.

Connection

The majority of modern 3D printers have built-in memory, a port for USB flash drives or are equipped with SD memory cards, which allows you to continue the 3D printing process without a permanent connection to a PC. Some devices may also support wireless technology (Wi-Fi or P2P) or connect via Ethernet. Recently, more and more manufacturers include in their devices the possibility of forming 3D printing farms from a cluster of devices connected by one local network.

Software

Additive technology comes with special software or is compatible with open-source programs that can be downloaded, for example, from the manufacturer's website. As a rule, the software runs on Windows, Linux or MacOS. The software package may include modules for optimizing 3D models, building automatic supports (supports), controlling the movement of the printing block and desktop, and advanced preparation of layers for printing.

3D printer models

Consider the different models of amateur and professional 3D printers recognized as the best in 2022.

Assembly kits

Self-assembly kits (DIY) are the most budgetary and popular variant of FDM/FFF/PJP 3D printers in Russia. The use of such kits allows you to independently assemble, configure, reconfigure and upgrade printing devices to suit your needs.

The most popular DIY kits in 2022:

Creality Ender 3

Thoughtfully designed home 3D printer with open chamber, large build area (WxHxD: 220x250x220mm) and high print quality at speeds up to 180mm/s. Works great with PLA, ABS, PETG, TPU, Wood and other plastics. Equipped with a single extruder, a heated worktable, a compact display that shows the main parameters, and an active cooling system. Suitable for printing small functional items, prototypes or decorative figurines. Connects via USB or microSD.

Flying Bear Ghost 5

Equipment for semi-professional use, equipped with an open chamber with dimensions of 255x210x210 mm. Due to the uniform supply of the filament, it allows you to produce high-resolution parts at a speed of up to 150 mm / s and an accuracy of up to 0.01 mm. The model is equipped with one extruder, a heated table, options for adjusting speed and temperature, an active cooling system and a convenient TFT color display. Compatible with HIPS, ABS, Wood, PLA, etc. Reliable, quiet operation. Connects via Usb, SD, Wi-Fi.

Creality Ender 5 Plus

A printer with a large working area (350x350x400 mm), one extruder and a filament sensor that prevents printing errors due to tangles or broken threads. It has a magnetic platform with heating up to 100 degrees in 10 minutes, a rigid, reinforced cubic frame and a reliable power supply with overheat protection. Provides fast, high-precision, stable printing with an adjustable layer thickness of 0.1-0.4mm.

Creality Ender 6

Equipment with a closed plastic case, one extruder with a heating temperature of up to 260 degrees, a color touch screen and a build area of ​​250x250x400 mm. Ideal for small batch production and prototyping. The printer is equipped with a heated bed, connects via SD and is compatible with most of the available filaments. The layer height is 0.1-0.4 mm.

Budget 3D printers

This category includes inexpensive, ready-to-use FDM/FFF 3D printers designed for beginners - ordinary users, students in robotics circles, schools, etc. The devices are endowed with additional options that allow you to achieve excellent results with simple, understandable operation.

The best budget models of 2022:

Anycubic Mega S

Functional equipment with a working space of 210x210x205 mm and the possibility of resuming the work process after a power outage. The device has a color touchscreen, a heated platform with Ultrabase coating, connects via data cable or SD and prints at speeds up to 100 mm/sec. Layer height - 0.05-0.3 mm.

FlashForge Adventurer 4

A good option for children or teenagers who are fond of 3D modeling. The printer has a working area of ​​200x200x250 mm, a heated platform, a color touch screen and is connected via USB, Ethernet or Wi-Fi. Construction speed - up to 150 mm / sec. Layer thickness - 0.1-0.4 mm. The model is also equipped with a built-in webcam, a filament end sensor, an auto-calibration function and the possibility of remote control through the application.

Voxelab Aries STEM

A printer with a full range of modern functions, designed to create objects of standard sizes (200x200x200 mm). Prints at speeds up to 80 mm/sec. and a layer thickness of 0.1-0.4 mm. Connection - Usb, SD, Wi-Fi.

QIDI i-Mate S

A device with a working space of 260x200x200 mm, connected via Usb, LAN or Wi-Fi. Layer thickness - 0.05-0.2 mm, construction speed - up to 80 mm/sec. Great for prototyping simple objects.

Budget Large Format 3D Printers

Devices designed to create a large number of small products in one go or to print large objects. These printers are equipped with a capacious platform and have increased reliability and stability.

The most popular low-cost large-format FDM 3D printers in 2022:

Wanhao D12/500

A model with an improved component base and mechanics, updated electronics, a redesigned feed mechanism, a heated platform and two extruders. Construction area - 500x500x500 mm. Layer thickness - 0.1-0.4 mm, build speed - up to 150 mm/sec. Connection - Wi-Fi, MicroSD.

Creality Ender 5 Plus

Apparatus with dimensions of the working area 350x350x400 mm. It has a robust construction with a reinforced structural profile frame and a heated platform. Provides the most accurate, stable printing and smooth, stable movement along the axes. Connected via SD. The layer height is 0.1-0.4 mm.

Creality CR-10S Pro V2

A 3D printer that delivers high performance and exceptional print stability. Ideal for creating print trusses that produce large runs of the same type of parts. Construction volume - 300x300x400 mm. Print speed - up to 180 mm / sec. (recommended speed is up to 60 mm/s). Layer height - 0.1-0.4 mm. Connection - SD.

Professional 3D printers

Professional-grade printers are designed to produce complex objects using high-temperature engineering plastics and other consumables. Such equipment has a closed chamber to maintain a certain temperature and ensure stable printing.

Best Professional FDM 3D Printers of 2022:

FlashForge Creator Pro 2

Technique with two independent extruders for simultaneous printing of two identical products. The second extruder can be used to create soluble supports for the production of complex models with a quality surface. Construction area - 200x148x150 mm. Layer height - 0.1-0.4 mm, build speed - up to 100 mm/sec. Connection - Usb, SD.

Picaso Designer Classic

A printer designed to solve a wide range of tasks. It has built-in profiles for different types of plastic, which makes it easy to start printing. Chamber size - 200x200x210 mm. Work speed - up to 100 cm3 / h, layer thickness - from 0.01 mm. Connection - Usb, Ethernet.

Anycubic 4Max Pro 2.0

Advantages of the model: dual drive extruder for working with soft, flexible plastics, filament end sensor, silent drivers, color display. The device provides the most accurate, stable printing at speeds up to 150 mm/sec. Camera dimensions - 270x210x190 mm. Layer thickness - 0.05-0.3 mm. Types of connection - Usb, SD.

QIDI Tech X-Plus

A printer with a capacious working chamber (270x200x200 mm), one extruder with a heating temperature of up to 300 degrees and a build speed of up to 150 mm/sec. Equipped with a heated platform, connects via Wi-Fi, Usb or LAN, the layer height is 0.05-0.2mm.

Single extruder professional 3D printers

Additive equipment of this kind is designed to solve various problems, from relatively simple to complex.

The most popular models of professional FDM/FFF 3D printers with one print head:

Picaso Designer X S2 (Series 2)

The main difference of this modification is the heating of the extruder up to 430 degrees, which allows working with a wide range of plastics, including engineering ones (ABS, PETG, PLA, PEEK, Nylon, Flex, etc.). Dimensions of the working chamber - 201x201x210 mm. Connection - Usb, Ethernet. Speed ​​- up to 150 mm / s. Layer thickness - from 10-250 microns. The printer is equipped with a heated bed.

QIDI X-Max

A 3D printer with a large printable area (300x250x300 mm) and a wide range of useful features. It has a robust design with a strong double Z-rail, a heated platform with a double-sided coating for working with different types of plastic and a 5-inch touch screen. The extruder heats up to 300 degrees. Compatible filaments - PLA, ABS, PETG, PC, Carbon, Nylon, Flex, etc. Connection type - USB storage, LAN, Wi-Fi. Working speed – up to 150 mm/sec. Layer height - 0.05-0.2 mm.

Picaso Designer XL S2

The model is designed for printing with engineering and refractory materials, as the print head heats up to 430 degrees. Robust aluminum body with steel frame guarantees reliability and no vibration during operation. Chamber size - 360x360x610 mm. Speed ​​- up to 130 cm3 / h. Layer thickness - 10-250 microns. Connection type - USB-drive, Ethernet.

TierTime UP300

It is equipped with three separate extruders for working with different materials (low-temperature, high-temperature, standard), as well as various interchangeable platforms (smooth, perforated, glass). Supports print queue for different users. Dimensions of the working area - 205x255x225 mm, layer height - 0.05-0.4 mm. Connection - Usb, LAN, Wi-Fi.

Bizon 3

An updated version of the Bizon 2 model. Layer thickness - 0.02 - 0.65 mm. Print area size: 300x300x400mm. Print speed: up to 160 mm/s. Layer height: from 0.02 to 0.65 mm. Connection type: USB, SD card.

Mid-range large format 3D printers

This category includes models for universities, specialized colleges and offices of medium-sized companies.

The best mid-range large format FDM 3D printers in 2022:

Raise3D Pro3 Plus

Equipment with a transparent body and two extruders equipped with a lifting mechanism, well-thought-out kinematics, interchangeable nozzles of different diameters and a convenient 7-inch color touch screen. Other options: Low Filament Sensor, Print Resume System, RaiseCloud Firmware, Webcam, IdeaMaker Slicer, RaiseCloud Cloud Service. Printed volume: 300x300x605 mm (for one extruder), 255x300x605 mm (for two extruders). Connection - Wi-Fi, Usb, LAN. Speed ​​– up to 150 mm/sec. Layer thickness - from 0.01 mm.

FlashForge Creator 4

High-performance, accurate 3D printer with a system of two independent extruders and an advanced thermal management system inside the chamber (to protect against cracking and deformation of engineering plastics). Robust steel body prevents vibration. Print area - 400x350x500 mm. Speed ​​– up to 200 mm/sec. Layer height - from 0.01 mm. Connection - Usb, Wi-Fi, LAN.

Picaso Designer XL Pro S2

Large-format model with a working area of ​​360x360x610 mm, a heated platform and two extruders with a heating temperature of up to 430 degrees. The device has a simple automatic calibration, a built-in material spool drying mode and a plastic feed control system. Layer thickness - 0.01 mm, speed - up to 130 cm3/h. Connection type - Usb, Ethernet.

CreatBot D600 Pro

The printer with the largest print area is 600x600x600 mm. Equipped with two extruders with heating up to 260 and 420 degrees respectively (for working with standard or engineering plastics). Other features: heated chamber, platform and compartments, speed - up to 120 mm/s, layer thickness - from 0.05 mm. Connection type - Usb.

Professional Dual Extruder 3D Printers

Professional FDM printers with two extruders are designed to solve the most complex tasks. This technique is equipped with a fully functional slicer and a reliable nozzle lift mechanism or independent extruders.

The most popular professional grade dual extruder 3D printers:

Raise3D Pro2 Plus

The flagship model of the manufacturer, endowed with a full range of useful features. The equipment, enclosed in a transparent case, is connected via Usb, Wi-Fi or LAN and is distinguished by quiet operation. Equipped with an extruder lifting mechanism, a 7-inch color touch screen, a filament end sensor, and a print resume system. Includes RaiseCloud software, webcam, replacement nozzles. Print volume - 305x305x605 mm (for 1 extruder), 280x305x605 mm (for 2 extruders). Speed ​​– up to 150 mm/sec. Layer height - from 0.01 mm. Connection - Usb, Wi-Fi, LAN.

Picaso Designer X Pro S2

A compact device with dimensions of the construction area of ​​201x201x210 mm, providing excellent print quality. It has a high temperature mode with heating up to 430 degrees for printing with complex filaments. Speed ​​- up to 130 cm3 / h, layer thickness - from 0.01 mm. Connection - Usb, Ethernet.

Raise3D E2

High-performance 3D printer with two independent print heads (IDEX system), heated platform and print speed up to 150 mm/sec. A built-in step-by-step video instruction for site calibration is provided. Layer thickness - 0.02-0.25 mm. Connection - Usb port, Wi-Fi, LAN. Print volume - 330x240x240 mm (1 print head), 295x240x240 mm (2 extruders).

FlashForge Creator 3 Pro

Model with a large chamber (300x250x200 mm), HEPA filter, built-in webcam, color screen and the ability to install hardened nozzles with a material melting point of up to 320 degrees. The heating speed of the working platform is up to 120 degrees in 3 minutes. Print speed - up to 150 mm / sec. Layer thickness - 0.05-0.4 mm. Connection type - Usb, Ethernet, Wi-Fi.

CreatBot F430 PEEK

3D printer ideal for PEEK and other filaments. Equipped with a closed chamber with temperature support and two printheads with heating up to 260 and 420 degrees, respectively. Construction area - 400x300x300 mm. Layer height - from 0.02 mm. Speed ​​– up to 180 mm/sec. Connection - Usb.

Ultimaker S5

An easy-to-use device that prints with threads of non-standard diameter - 2.85 mm. The size of the working area is 330x240x300 mm. Layer thickness - from 0.02 mm. Speed ​​- 24 mm3 / sec. Connection type - Usb, Ethernet, Wi-Fi.

Photopolymer desktop 3D printers

Modern models of 3D printing devices using photopolymers are equipped with monochrome displays with a resolution of up to 8K, which provide high speed and quality of building objects of any geometry.

Best photopolymer 3D printers of 2022:

Phrozen Sonic Mini 8K

A compact budget LCD printer with over 2000 hours of uninterrupted operation. Equipped with 8K 7.1” Mono LCD display. Print volume - 165x72x180 mm. Layer height - 0.01-0.3 mm. Resolution along the XY axis - 22 microns.

Phrozen Sonic 4K 2022

Equipment for permanent loads, ideal for dental laboratories and dental clinics. It has a heated chamber 134x75x200 mm with an odor filter and a Mono 4K 6.1” LCD display. Layer thickness - 0.01-0.3 mm.

Formlabs Form 3+

LFS printer with an intuitive interface and many special settings. The light source is a 250 mW laser. The size of the working area is 145x145x185 mm. Layer thickness - 0.025-0.3 mm.

Anycubic Mono X 6K

3D printer with a working chamber 197x122x245 mm and a high-quality Mono 6K 9.25” LCD screen. Layer height - 0.01-0.15 mm.

XYZ Part Pro 150

Equipped with a 5 inch LCD touch screen. Illumination source: 405 nm UV laser. Print area size: 150x150x200 mm. Layer thickness: 25 to 200 microns (0.025 - 0.2 mm).

Best Large Format Desktop Resin 3D Printers

Phrozen Sonic Mega 8K

The best 3D printer in its segment, capable of solving tasks that usually only an entire farm can handle. Suitable for both mass production of small detailed products, and for printing huge objects and dioramas. It is equipped with a 15-inch Mono 8K LCD display and has a working area of ​​330x185x400 mm. Resolution - less than 50 microns, layer height - 0.01-0.3 mm.

Formlabs Form 3L

LFS-technique with a construction area of ​​335x200x300 mm, creating high-precision details using a 2x250 mW laser with a spot diameter of 85 microns. It is possible to install two cartridges at the same time for uninterrupted printing of large models. Layer thickness - from 0.025 mm.

Totals

All 3D printers reviewed have been rigorously tested in practice and tested by experienced engineers.

Learn more