(506) 2240-6804
3D printing a lamborghini
Lamborghini best 3D printing models・Cults
Rotiform HUR wheels for 1/24 Aoshima Huracan
€2
Aoshima 1/24 Huracan LP610-4 Vorsteiner Body Kit & HUR wheels
€13.80 -10% €12.42
Replica Lamborghini Huracan STO
€5
Lamborghini 350 GTV Printable Car
€12.50
Lamborghini Aventador GT Wing for 1/64
Free
V6, V8 and V10 engines
€2.80 -50% €1.40
Wall decoration Porsche 911 model 996
€0. 80
LAMBORGHINI HURACAN ST EVO
€2.50
Aventador SVJ
€5 -40% €3
Metamorphosis keychain - Lamborghini Huracan Performace
€3
Lamborghini Countach LPI 800-4
€5 -40% €3
Aventador LP 780-4
€5 -40% €3
Metamorphosis keychain - Lamborghini Aventador LP 780-4 2022
€3
V10 engine print in place
€1. -50% €0.88
76
Lego Style Brick Italian Muscle Car
€5
BMW DTM STEERING WHEEL RIM FOR FANATEC CSL HUB AND UNIVERSAL HUB
€9.99
AMG GT3 STEERING WHEEL RIM FOR FANATEC CSL HUB
€9.99
V12 engine print in lplace
€1.76 -50% €0.88
AMG GT3 Steering wheel rim for fanatec universal hub
€9.99
LAMBORGHINI SIAN 2020 PRINTABLE CAR BODY
€5.68
LAMBORGHINI SIAN 2020 PRINTABLE CAR IN SEPARATE PARTS
€10.23
LAMBORGHINI COUNTACH 5000 QV 1985 PRINTABLE CAR BODY
€5.
68
LAMBORGHINI COUNTACH 5000 QV 1985 PRINTABLE CAR IN SEPARATE PARTS
€10.23
Lamborghini Aventador off-road edition
€35
Lamborghini Gallardo Liberty Walk kit
€2.35
Lamborghini Huracan Tecnica 2022
€15
Lamborghini Huracan Performante (Liberty Walk)
Free
LEGO Speed / Cars support
€5
LAMBORGHINI .
€1.20
Ferruccio Lamborghini Italian car designer
€12
Metamorphosis keychain - Lamborghini Aventador SVJ
€3
SLOT CHASSIS FOR LAMBORGHINI COUNTACH MODEL KIT
€3.
50
Lamborghini Huracan Super Trofeo Evo Race 2022
€6.83
radial rim8 r8cm9 concave19 inches 1/18 1/12 1/24 1/10
€1.50
couvre bouton start stop style lamborghini
Free
1/24 Scale BBS rims and tire 20 INC offsets
€4.20
PACK 20 VARIOUS CAR KEY RINGS
€5.41
LAMBORGHINI AVENTADOR SVJ
€15
LAMBORGHINI SIAN HQ
€15
lamborghini
€7
Alexa Wall Mount Topless 3Gen.
Free
Lamborghini Diablo
Free
Lamborghini Countach 5000 QV 1985 Printable Body Car
€8.
33
MyDigitalSlot IT1 Car, 1/32 Complete Analog / Digital Slot Car
€12.50
Lamborghini Diablo
Free
LAMBORGHINI LM002 PICKUP 1986 PRINTABLE CAR BODY
€5.68
LAMBORGHINI LM002 PICKUP 1986 PRINTABLE CAR IN SEPARATE PARTS
€10.23
DIABLO VT 6.0 SE WHEELS (18 INCH) 1/24TH MODEL
€2.50
Father and Son Built a Drivable, 3D Printed Lamborghini in Their Garage
When the real Lamborghini company discovered this project, they had a little surprise sent to the dad and son duo.
3D printing has given us some incredible creations. We’ve seen a house build in 24 hours, a restaurant that only serves 3D printed food, and the first steps toward a 3D printed heart. All these builds are incredible, but perhaps none comes as close to a heart-warming story as the father and son who 3D printed a Lamborghini.
Sterling Backus and his son Xander have been building a Lamborghini from scratch, right in their garage in Erie, CO. They’re modeling the car off a Lamborghini Aventador, one of Xander’s favorite cards, and using a 3D printer to create the body panels, interior and other parts.
Named the AXAS Interceptor, the working supercar will have all the components needed to drive it like a real Lamborghini.
The father and son have documented their build process on Sterling’s YouTube channel. Sterling published the first update of the project two years ago, showing just the taillight housing they printed using a CR 10S printer, working lights and all.
To make the 3D printed parts look like the real Aventador, the duo skinned the body panels with carbon fibre. The interior of the car combines 3D printed parts with components from other cars. To make the AXAS Interceptor drivable, Sterling and Xander build the drivetrain from a Corvette engine, a transaxle from a Porsche 996 and more custom-made parts.
The project took a year and a half to reach the stage where it was drivable, with many failed parts and 3D printing errors along the way. But each time Sterling and Xander added one more new part to the car, they knew they had to see this project through to the end.
After the work-in-progress AXAS Interceptor passed its first test drive, news got around to the real Lamborghini. Amazed with the work the father-son team had done, the company reached out to Sterling and worked with him to plan a surprise for Xander and the rest of the family.
Overnight, Lamborghini exchanged the AXAS Interceptor with a real Aventador.
They captured Xander’s reaction on film and shared their story as a short video ad around Christmas time. The best part – Lamborghini let Sterling and Xander borrow the Aventador for a few weeks before returning the 3D printed car.
Sterling and Xander are still working on the AXAS Interceptor, coming closer and closer each day to a finished project.
Follow the updates on Sterling’s YouTube Channel here:https://www.youtube.com/channel/UC8YYptrlqdUN9GsIFsT6Mwg
Best Lamborghini・Cults
3D Printable ModelsRotiform HUR wheels for 1/24 Aoshima Huracan
2 €
Aoshima 1/24 Huracan LP610-4 Vorsteiner Body Kit and HUR wheels
€13.80 -10% 12.42 €
Replica Lamborghini Huracan STO
5 €
Lamborghini 350 GTV Typewriter
12.
50 €
Lamborghini Aventador GT Wing for 1/64
Free
V6, V8 and V10 engines
€2.80 -fifty% 1.40 €
0.80 €
LAMBORGHINI HURACAN ST EVO
2,50 €
Aventador SVJ
5 € -40% 3 €
Keychain Metamorphosis - Lamborghini Huracan Performace
3 €
Lamborghini Countach LPI 800-4
5 € -40% 3 €
Aventador LP 780-4
5 € -40% 3 €
3 €
Seal of the V10 engine in place
€1. -fifty% 0.88 € 
76
Lego Style Brick Italian Muscle Car
5 €
BMW DTM STEERING WHEEL RIM FOR FANATEC CSL HUB AND UNIVERSAL HUB
9.99 €
AMG GT3 STEERING WHEEL RIM FOR FANATEC CSL HUB
9,99 €
Seal of the V12 engine in place
€1.76 -fifty% 0.88 €
AMG GT3 Steering wheel rim for fanatec 9 universal hub0003
9.99 €
LAMBORGHINI SIAN 2020 CAR BODY WITH PRINT
5.68 €
LAMBORGHINI SIAN 2020 PRINTED CAR FROM SINGLE PARTS
10.
23 €
LAMBORGHINI COUNTACH 5000 QV 1985 PRINTED CAR BODY
5.68 €
LAMBORGHINI COUNTACH 5000 QV 1985 PRINTED CAR IN PARTS
10.23 €
Lamborghini Aventador Off-Road Edition
35 €
Set Lamborghini Gallardo Liberty Walk
2,35 €
Lamborghini Huracan Tecnica 2022
15 €
Lamborghini Huracan Performante (Liberty Walk)
Free
Support LEGO Speed / Cars
5 €
LAMBORGHINI
1,20 €
Ferruccio Lamborghini Italian car designer
12 €
Keychain Metamorphosis - Lamborghini Aventador SVJ
3 €
nine0002 SLOT CHASSIS FOR LAMBORGHINI MODEL KIT COUNTACH3,50 €
Lamborghini Huracan Super Trofeo Evo Race 2022
6.
83 €
radial rim8 r8cm9 concave19 inch 1/18 1/12 1/24 1/10
1.50 €
couvre bouton start stop style lamborghini
Free
nine0002 1/24 Scale BBS rims and tires 20 INC offset4.20 €
PACK OF 20 DIFFERENT CAR KEYFOBS
5.41 €
LAMBORGHINI AVENTADOR SVJ
15 €
LAMBORGHINI SIAN HQ
15 €
lamborghini
7 €
nine0002 Alexa Wall Mount Topless 3Gen.Free
Lamborghini Diablo
Free
Lamborghini Countach 5000 QV 1985 Printed car body
8.
33 €
MyDigitalSlot IT1 Car, 1/32 Complete Analog / Digital Slot Car
12.50 €
Lamborghini Diablo
Free
LAMBORGHINI LM002 PICKUP 1986 PRINTED CAR BODY
5.68 €
LAMBORGHINI LM002 PICKUP 1986 PRINTING MACHINE IN SEPARATE PARTS
10.23 €
WHEELS DIABLO VT 6.0 SE (18 INCHES) 1/24th MODEL
2,50 €
Lamborghini Aventador on a 3D printer
Creativity
Subscribe to the author
Subscribe
Don't want
66
Hello everyone!
Today I want to talk about my new project. While browsing YouTube for inspiration, I found a great project on the Machinators channel. They built a real off-road Lamborghini Aventador (lambotruck).
And I just got excited about this project, and decided to model and print a similar model on radio control in 1:10 scale as soon as possible. nine0005
>> You can get acquainted with my other projects in the VK group: https://vk.com/mrpaulm
Start modeling
I found drawings of Aventador on the Internet, scaled them up and uploaded them to the Siemens NX program, in which I have been creating my models for many years. The first step is to model the car body. To do this, you have to create a lot of complex splines that repeat the body of the car, and already on them smooth surfaces are created, which then thicken by the desired amount (from 1.2 mm on the wings and up to 2 mm on the roof). nine0005
3 thousand elements from banal stretching to a complex surface are behind, and the body of the future off-road sports car is ready! I finalized the design of the original bumpers, modeled side moldings with steps, as well as mudguards that will cover such large wheels.
Next, I proceed to the creation of a fundamentally new frame chassis with independent front suspension and a rear axle blocked. The engine with the gearbox will be located at the rear of the car, and the gearbox housing itself will connect the parts of the frame together. In the center of the chassis there will be a transfer case with a gear ratio of 1 to 1, through which torque will be transmitted to the rear axle. A battery box will be placed in front of the chassis, which in turn will be screwed to the frame to make it more rigid. nine0005
Getting started printing
I will print on Creality 3 series printers (S1 pro, V2) with a table size of 220x220mm. All body parts, frame parts, etc. will be printed from PLA + plastic from eSun, and the driveshafts and gears from polyamide ePA12. I liked this material, ePA12, for its strength characteristics and self-lubricating properties. And it turned out to be no more difficult to print than PLA, however, for this I had to purchase a dryer at 70 degrees.
Because the material is very hygroscopic (strongly absorbing moisture), it must first be dried for about a day. nine0005
Finally it's time to assemble
First we assemble the chassis. In this project, I tried to minimize the number of fasteners, and in particular nuts. The screws now screw directly into the plastic. The chassis is assembled as a constructor, easily and naturally. For this, I specially developed a complete instruction in PDF format with pictures and a complete list of purchased parts. A couple of evenings with a cup of tea was enough to assemble the chassis, install all the electronics and make the first test run around the apartment. nine0005
Next, we begin to assemble the lamp body. All body parts that needed to be painted in color were finished and painted with Tamiya acrylics from an airbrush.
The body must be assembled on the chassis, as body elements such as fenders and bumpers require fitting joints, as on a real car.
