3D printer upgrade parts

3D Printer Spare Parts and Upgrades

Shop by category.

Build Surfaces

Nozzles

Hot-Ends

Extruders

Fans

Heatbreaks

Mainboards

Heating Cartridges

Thermistors

PTFE Tubes

FEP Film

Stepper Motors

3D Printer Enclosures

Displays

Bearings

Others

Suitable for Specific Brands

Spare Parts & Upgrades: 890 products

Sort by

RelevanceBestsellersCustomer ReviewsPrice, Low to HighPrice, High to LowNew arrivalsHighest Discount

BROZZL MK8 Brass Nozzle 5 diameters
- Smooth finish
- Non-stick
- High precision
BROZZL MK8 Nozzle - Hardened Steel 4 diameters
- Smooth finish
- Non-stick
- High precision
BondTech Heatsink
- Better heat dissipation
- Self-adhesive backing
BondTech NEMA17 Pancake Stepper 25mm
- Removable cable
- High torque
- Original Bond Tech
Slice engineering Vanadium Nozzle 5 diameters
- Lifetime warranty against abrasion
- Wear-resistant, plastic-repellent coating
- Hardened nozzle
Elegoo Replacement Metal Resin Tank - Set of 2 6 Model types
- Original spare part
- From Elegoo
BuildTak PEI film 32 sizes
- First-class production
- Easy to apply
- Ideal with the FlexPlate system
E3D V6 Brass Nozzle - 1.75 mm 7 diameters
- Smooth finish
- High performance
- Fine details
Micro-Swiss All Metal Hotend Kit for CR-10
- All metal
- Better heat dissipation
- No adjustments required
Micro-Swiss Direct Drive Extruder for Creality CR-10 & Ender 3 2 Model types
- Dual drive gear
- Easy filament loading
- For flexible filaments
Antclabs BLTouch Levelling Sensor
- High precision
- Works with all surfaces
- Easy installation
E3D V6 Nozzle X - 1.75 mm 7 diameters
- Extremely hard
- Unique nano-coating
- Easy cleaning
BuildTak FlexPlate System 26 sizes
- Easy to use
- Variety of Different Sizes
- Complete System
BondTech Extruder BMG right
- Dual-Drive
- Adjustable tension
- Versatile use
Capricorn XS Ultra Low Friction PTFE Bowden 4 Model types
- Extremely low friction
- Ideal for flexible and brittle materials
- Different sizes available
BROZZL MK8 Nozzle - Copper Plated 4 diameters
- Smooth finish
- Non-stick
- High precision
Noctua NF-A4x10 Fan 2 Model types
- Ultra-quiet
- Premium quality
- Excellent long-term stability
E3D Thermistor
- Easy connection
- Cartridge style
- With extension cord
Creality PEI Flexible Build Plate 18 Model types
- Powder-coated surface
- Good adhesion
- Flame retardant
Micro-Swiss Direct Drive Extruder for Creality Ender 5 2 Model types
- Dual drive gear
- Easy filament loading
- Perfect for flexible filaments
E3D Prusa Thermistor
- Spare thermistor
- Especially for Prusa
BondTech CHT Coated Nozzle M6 x 1.75 mm 7 diameters
- Nickel plated
- Higher melting capacity
- High hotend compatibility
Elegoo LCD Screen 8 Model types
- Original spare part
- From Elegoo
Capricorn TL Transparent PTFE Bowden 4 Model types
- High quality
- Different sizes
- Perfect dimensions

All prices incl. VAT.

3D Printer Hot-Ends - 3DJake International

Sort by

RelevanceBestsellersCustomer ReviewsPrice, Low to HighPrice, High to LowNew arrivalsHighest Discount

Micro-Swiss All Metal Hotend Kit for CR-10
- All metal
- Better heat dissipation
- No adjustments required
Micro-Swiss All Metal Hotend Kit for the CR-6 SE
- Titanium alloy heat break
- Well defined melting zone
- Aluminium heating block
Creality Hotend 24 Model types
- Original spare part
- From Creality
Phaetus Dragonfly Hotend BMS
- Temperature resistance up to 500 ° C
- All-metal design
- Good heat dissipation
Phaetus Dragonfly Hotend BMO
- Temperature resistance up to 500 ° C
- All-metal design
- Good heat dissipation
Micro-Swiss Silicone Socks Set for MK7 / MK8 / MK9 1 set
- High-temperature resistant
- Set of 3
- Non-stick
E3D V6 Silicone Socks 1 set
- Non-stick surface
- For V6 heating blocks
- Keeps your heating block clean
BROZZL All Metal Hot-End Upgrade Kit for Ender & CR-10
- Easy to use
- Fast assembly
- Precise manufacturing
E3D V6 Plated Copper Heater Block
- Good high-temperature performance
- Softening point well over 500 ° C
- Less sticking
Slice engineering Mosquito
- Perfect heat transfer
- Temperatures up to 450 ° C possible
- Flexible installation
E3D V6 All-Metal Hotend Bowden - 1.75 mm 4 Model types
- High temperature performance
- All-Metal
- Compact design
Micro-Swiss High Temperature MK8 Heating Block Upgrade
- M6 thread size
- Special alloy
- High printer compatibility
BondTech BMG-M & Mosquito Magnum Set 2 Model types
- Perfect upgrade
- Complete set
- Safe 3D printing process
E3D Prusa V6 Hotend 3 Model types
- Replacement hotend
- With V6 parts
- Improved version
Slice engineering Mosquito Magnum
- High printing speed
- Temperatures up to 450 ° C possible
- Flexible installation
Creality Heatsink 5 Model types
- Original spare part
- From Creality 3D
E3D Volcano Silicone Socks
- Non-stick surface
- For Volcano heating blocks
- Keeps your heating block clean
Anycubic Hotend 10 Model types
- Original spare part
- By Anycubic
Micro-Swiss MK10 All Metal Hotend Kit with Cooling Block for Wanhao i3
- Easy installation
- Many advantages
- Better heat transfer
Micro-Swiss MK10 All Metal Hotend Kit
- Higher temperatures possible
- Faster extrusion possible
- Abrasion secure
Phaetus Dragonfly HIC High Flow Hotend
- Integrated, welded nozzle
- Stable side shell structure
- Up to max. 350 ° C
Slice engineering Copperhead Heater Block
- Nickel-copper alloy
- Up to 450 ° C
E3D V6 Silicone Socks Pro 1 set
- Non-stick surface
- For V6 heating blocks
- Keeps your heating block clean
Micro-Swiss All Metal Hotend Kit for CR-10S Pro
- All Metal Hotend
- Better heat dissipation
- Can be used without any modifications

All prices incl. VAT.

Services of 3D printing of parts to order in Moscow!

TOTALPRINT3D provides custom 3D printing services in Moscow and throughout Russia.
We make functional parts, spare parts, prototypes and figurines from plastic on a 3D printer from
1 pc. with a guarantee of quality and timing.

Order 3D printing

3D printing of plastic parts
with a guarantee!

TOTALPRINT3D provides custom 3D printing services in Moscow and throughout Russia.

We 3D print functional parts, spare parts, prototypes and plastic figurines from 1 piece.

Order 3D printing

Today, 3D printing is the fastest and most economical way to make almost any plastic part!
Consider manufacturing parts for your ideas and projects using the most popular technologies (FDM, SLS, SLA, DLP) from industrial plastics and composites.

Why should 3D printing be ordered from us?

Manufacture from 1 part

We manufacture both piece parts and small series orders.

Own fleet of equipment

We do not resell the services of other manufacturers. All orders are made only by the Totalprint3D team using their own equipment!

Proven materials

We use only proven engineering plastics and composites based on them from a domestic manufacturer!

We work with Phys. and Yur. persons

We work under an agreement with individuals and legal entities. If necessary, we conclude a confidentiality agreement (NDA).

Strict reporting

You can check the progress of work at any time! We will send a detailed photo and video report!

Convenient payment system

For individuals, we use card payments through the online cash desk.
For legal entities and individual entrepreneurs, payment is made by bank transfer.

Professional team

Our team consists of young engineers with more than 5 years of experience in 3D technologies in various industries!

Precise dimensions

We ensure the accuracy of manufacturing parts from 0. 05 mm!

We do post-processing of parts

At the request of the customer, we produce finishing products: chemical polishing, grinding and painting products.

~~Examples of 3D printing in TOTALPRINT3D:~~

More projects you can see in our INSTAGRAM.

Materials for 3D printing:

We have selected the 20 most popular materials for 3D printing, which will suit most of your tasks.

Base Resins

Composite Resins

Photopolymers

Special Materials

Base Resins
Composite Resins Photopolymers Special Materials

ABS is the base material used for 3D printing. Its main advantage is high rigidity, interlayer adhesion and excellent machinability with an abrasive tool. Of the negative properties of this material, it should be noted toxicity (in no case should contact with food be allowed), rapid destruction under the influence of ultraviolet radiation and poor resistance to solvents.
Medium strength, suitable for body and functional parts operating in non-aggressive environments. It softens at about +70 degrees.

Perhaps the most common plastic for 3D printing!
Low shrinkage, high stiffness and solvent resistance. However, it has low heat resistance (it softens at +50 degrees), it is rather difficult to process with abrasive and cutting tools at high speeds and is destroyed under the influence of ultraviolet radiation.
This material is perfect for making product prototypes and unloaded functional parts.
ATTENTION! Advertising claims about environmental safety and suitability for contact with food have no evidence base! Plastic decomposes only in special bioreactors!

This material is also called "ABS killer". It has medium hardness, does not dissolve in anything, does not shrink during printing and is resistant to ultraviolet radiation, it is quite well processed by abrasives and cutting tools. It softens at about +70 degrees.
Suitable for everything! It is acceptable to use with food products (cutting for dough and mastic).

This material is almost similar in properties to ABS plastic, but it is suitable for contact with food products (you can make punches for cookies!) and in the case of special solvent treatment you can get a transparent product. Ideal for bottle mockups, neon letters and lights).

The material is similar in properties to ABS, but unlike ABS, it is UV resistant. Suitable for parts that are installed outdoors.

Impact-resistant glass-filled (30%) polyurethane-based composite with heat resistance up to 110 degrees. "Soft" version of TPU GF-10.
Possesses high chemical resistance to solutions of acids and alkalis, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane. Excellent for drilling and threading. Very difficult to sand and paint (special primer required).

WARNING! Available in off-white and black only.

Impact-resistant glass-filled (10%) composite based on polyurethane with heat resistance up to 110 degrees for printing large gears, strong housings, mechanically loaded parts, aerodynamic body kits for cars.
Possesses high chemical resistance to solutions of acids and alkalis, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane. Excellent for drilling and threading. Very difficult to sand and paint (special primer required).

ATTENTION! Available in off-white and black only.

Composite based on ABS and PA6 with 8% fiberglass.
Suitable for end product applications where high impact and UV resistance is required.
Inert to most commercially available chemical solvents, ideal for underhood printing and auto tuning.

WARNING! Available in off-white and black only.

Impact-resistant carbon-filled (5%) material for mechanically loaded parts (gears, tool elements, housings, etc. ). Resistant to all types of solvents, gasolines, acids and alkalis, oils and fats.
Works well with abrasive and cutting tools, incl. at high speeds.

Structural composite based on chopped glass fiber reinforced ABS. Fiberglass content - 12%.
Has outstanding strength characteristics (compared to most 3D printing materials), increased hardness, elasticity, tensile and compressive strength, low print shrinkage.
Unlike plastic FORMAX - not electrically conductive!
VIKA softening point: 118°C.
Available in black only.

High impact flame retardant (UL94 V-0) polymer/polymer composite based on ASA (acrylonitrile styrene acrylate) modified with polycarbonate (PC). Designed for professional use. Ideal for the manufacture of connector blocks for wires, electrical instrument cases, electrical connectors, parts with increased fire safety requirements. Possesses the highest resistance to burning, self-extinguishing.

Engineering material based on ABS with added carbon fiber (30%), capable of withstanding heavy loads and high temperatures, with virtually no shrinkage during printing.
Compared to conventional ABS, it has the following advantages:

Increased strength and rigidity
Very good dimensional stability
Lightweight
Excellent finish (hidden layers)

CAUTION! Conductive material!

The material is similar in its characteristics to TOTALPRO CF-5 carbon fiber, but due to the foaming structure it has a reduced density (up to 0.8 g/cm3 versus 1.15 g/cm3 for CF-5). This property makes it possible to successfully use this plastic in the manufacture of elements of unmanned aerial vehicles and radio-controlled aircraft / helicopters, as well as in the creation of objects with positive buoyancy.

If you ask us "what is the strongest plastic for 3D printing?", then the answer is unequivocal - ULTRAN 630! This is the most durable material for 3D printing currently available in Russia (in terms of tensile strength, it is comparable to aluminum alloys). In addition to outstanding strength, it is resistant to all external influences (solvents, ultraviolet, etc.) and is the most heat-resistant plastic (it softens after 135 degrees).
Excellent for:

surgical items to be sterilized in steam autoclaves;
power parts;
parts exposed to aggressive chemical attack;

If you are familiar with Lost Wax Casting (LVM), then this material is for you! This modified wax is designed to create printing waxes of simple and complex parts for further casting from metal (usually steel, aluminum, bronze, brass).

Flexible materials of various stiffness are intended primarily for 3D printing of rubber-like products.

Gray photopolymer base.
Highly detailed and medium durability.
Suitable for figurines, mockup parts and accurate prototypes.

Orange high precision photopolymer.
Has very high (~130 degrees) heat resistance and amazing detail. Hard and brittle. It is intended, first of all, for high-precision details of mock-ups, figurines, master models for pouring into silicone.

Photopolymer with improved impact and bending strength. Ideal for various technical parts subject to cyclic loads (latches, clamps, carabiners, etc.).

Structural photopolymer, properties similar to ABS plastic.
Excellent for micro gears and functional parts.

Photopolymer with heat resistance up to 190 degrees! It has high rigidity and is intended for functional parts operating for a long time at high temperatures (bushings, dielectric spacers, etc.)

Price of 3D printing services:

Attention! The minimum order amount is 4000r.
You can see the full price list for the services provided in the PRICES section

3D printing "PRO"

From 30 r/cc

3D printing with structural composite plastics based on ABS, polyurethane and polyamide, reinforced with glass and carbon fibers.
Used in the manufacture of functional parts subject to various loads (mechanical, thermal, chemical).

ORDER

3D printing "LIGHT"

From 8 r/cc.

3D printing with base plastics PLA, ABS, SBS, PETG
It is used for models, figurines, decorative details, templates, equipment and other products that are not subject to mechanical and thermal loads.

ORDER

Where are we?

Detailed contact information and directions to the pickup point can be found in the CONTACTS section

Where are we located?

Detailed contact information and directions for
to the point of issue of orders can be found in the section CONTACTS

E-mail: [email protected]
Phone: +7(495)109-19-72

Office and production:
Moscow, Vnukovo, st. 1st regular d.6

Receiving samples and issuing orders:
Moscow, Leningradsky pr-t d.45Gk37
ONLY ON WEEKDAYS! from 8:00 to 17:00.

Working hours:
Weekdays: 10:00-19:00 (break 13:00-14:00)
Weekends: 10:00-16:00 (break 13:00-14:00)

Download company details

Spare parts for 3D printer in Yekaterinburg

Catalog

3D printer spare parts, limit switch, 3 pins for 3D printer CR10 Ender3, accessories

321

386

to shop 0.4mm Heat Resistant for 1.75mm Filament Ender 3/3 pro/CR10 Printer

581

1161

Shop

TRONXY CRUX1 Mini 3D Printer Model Direct Drive & OSG Extruder Parts , rail, print size 7.08 inch, portable Desktop

12436

17766

In the store

3D printers Extruder renewal replacement aluminum alloy Block Block 1.75 mm threads for Crealy CR-10 3D printers spare parts 9000 468 9000 9000 9000 9000

in store 9000

V store for 3D Printer Aluminum Alloy Ender-3 Printer

512

1023