3D printer removal tool

F-FLEX (3D Part Removal Tool)

Yes, it’s just a scraper, but we designed it to work really well with your 3D printer. Introducing the F-FLEX, the ultimate 3D part removal tool.

Note: the F-FLEX blade is EXTREMELY SHARP! Please dull up the edge with sand paper if kids are going to have access to this product. We do not recommend its use around children and we also recommend caution for any users. Keep your hands BEHIND the blade at all times, as your prints can suddenly breaks loose, which is often the case.

$14.99

In stock

F-FLEX (3D Part Removal Tool) quantity

SKU: 90-502 Categories: Accessories, S2 Accessories, S2 Dual X Accessories, S4 Accessories (ALL), S4-XL Accessories, Stacker F1, Stacker F1-XL Tags: 3d desktop printer, 3d part removal tool, 4 head, accessories, color fabb, f box, f-1, f-flex, f-pac, F1, fbox, filaments, fpac, frame, high capacity dessicant pack, i-beam, ibeam, S2, S4, stacker, stacker 3d, stacker S4-XL

Description
Additional information

Removing prints from the build plate is an essential aspect to 3D printing in general. The two printing technologies that dominate the market are FDM/FFF (filament extrusion) and SLA (photo cure resin), and both require the user to remove their prints from the build plate. It doesn’t matter if your printer costs 500 or 30,000 dollars, the process is the same. In most cases a scraper blade is still the preferred method because it’s fast, easy, and effective. Even with modern “flex” it’s often easier to just use a scraper, especially for parts with low layer heights. Scrapers are also used to perform a final cleaning of the build plate before you begin the next print.

Here’s the problem – you can’t actually buy a thin bladed scraper with a sharp edge. Because of this, most users grab a putty knife from the basement. The problem is that putty knives were never designed for 3D print removal. Putty knives are too stiff, the blades too thick, and the edge way too dull. Moreover, the corners come to a point, and this can easily damage your build surface. An off the shelf putty knife also puts way too much stress on the build plate and underlying structure, and this can lead to bending the build plate and other damage to your printer.

The F-FLEX solves all these problems, of course! Sure, it may look like a putty knife, but there is a lot of technology packed into this design. First, we designed a blade with just the right amount of flex. This is important because it’s the flex that makes it easy for you to get the tool under your prints from a variety of angles and positions. Second, the blade had to be incredibly thin, and hold a sharp edge. This meant the steel needed to be first class, not cheap imported stamped steel. We use a hollow ground high carbon steel blade, and roll it until it’s the perfect thickness. Third, the blade had to have special rounded edges to prevent it from digging into your printer’s build plate. We also put a slight angle on the blade to make it even easier to slide under your prints. Fourth, we added an ergonomic handle. The blade is sharp, so getting a good grip is essential for safe usage. The F-FLEX handle uses a special TPU soft touch over molding process. Finally, we included a durable striking cap into the handle which allows you to “knock-off” your models, especially useful for certain types of prints.

Key Feature/Benefits

Ultra thin and sharp blade slides easily under your prints
High flex blade for better ergonomics and lifting of your prints
Soft touch over molded handle for a secure grip
Built in hammer cap for knocking-off your prints.
Proudly made in the USA

The information below reflects shipping weight and dimensions (if applicable)

Weight	2 lbs

Flashforge 3D Print Removal Tool (Spatula)

Now: $3.99

Description
Additional Information

Description

Flashforge 3D Print Removal Tool

Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.

Includes: Spatula (1 pcs)

View AllClose

Additional Information

PSC:	Tools & Shop Supplies
GPC:	Tools & Shop Supplies
Brand Name:	Flashforge

View AllClose

Related Products
Customers Also Viewed

3D printing tools. What you need to have on hand.

If you have a 3D printer, then you will have to master the intricacies of 3D printing. And to facilitate this process, you need to acquire some tools (Tools for 3D printing).

Today we will talk about what kits and tools you may need.

Spatula, scraper…

You may need a spatula and scraper to get started. These can be painting or artistic devices that help to remove the finished model from the working platform. They are especially indispensable in cases where you print with difficult-to-separate plastic.

To remove the model with the blunt end of the spatula, try to pry the model from one side. Once you succeed, try to delete the model manually. If this does not work, then try to squeeze the spatula between the table and the model and slightly raise it.

It is important to be very careful not to scratch the surface of the table and injure yourself.

Deburring tool

This tool is the most indispensable tool of all. It really makes it easy to remove supports, clean up the model. At the same time, the tool is safe, and it is much more convenient to use it than to wield a knife. This tool will be especially useful when cleaning round holes.

Utility knife

This is a knife used for cutting appliqués, sometimes called a hobby knife. This tool is ideal for precise cutting of ABS, PLA and other popular plastics. It is important that this knife is very sharp. But it is also important to follow safety measures when working with the tool.

Pliers, round nose pliers

These tools are extremely useful when removing supports. At the same time, pliers are also useful for the 3D printer itself and for post-processing. Supports can be cut a little with a sharp knife and then with pliers it will be easy to remove them not one by one, but in blocks.

Wood carving set

This set is very useful for fine cleaning of models. The tips in this set have a variety of shapes, which allows for high-quality cleaning of models of any geometry and even in hard-to-reach places: corners, roundness, etc.

Super Glue

In fact, the choice of adhesives is now simply huge, and their possibilities are almost endless. Be sure to get superglue, as it is suitable not only for repairing or filling gaps, but also for gluing individual printed nodes. Be sure to focus on the viscosity of the composition, and also select the right tool. If you need to fill gaps, then we recommend choosing denser compositions than for assembling small parts. An important note - superglue works great with plastics such as ABS and PLA.

Files

A set of mini files will come in handy. Various forms of tools will allow grinding and smoothing of various surfaces.

Sanding (sanding) paper

With the help of grinding, surfaces can be significantly smoothed, achieving the ideal condition of the models. Especially grinding will be relevant if in the future the model will be stained. Sandpaper with a grit size of 120-200 will be the ideal solution for all types of plastics. Models made of ABS are particularly suitable for sanding.

Instead of a conclusion

All the 3D printing tools that we reviewed above will not gather dust on the shelf, waiting in the wings. If you are into 3D printing, then all of them will be in your favor. This is, in fact, the base that any 3D printer should have. Many manufacturers equip their 3D printers with a set of tools that can help with their work. If your equipment comes with a tool kit, take a close look at it so you don't waste money on what you already have.

Tool kit required for 3D printing

top sellers

Bearing 604UU U604ZZ

U-bearing U604ZZ 604UU 4*13*4

35. 00 UAH
Thermal mat for 3D printing 200 x 200 mm

3D printing thermal pad

150.00 UAH
Buy epo3d+ 3D printer

Epo3d+ Ukrainian FDM 3D printer on HIWIN rails. Thanks to reliable...

UAH 35,000.00
ABS granules

ABS granules for extrusion

400.00 UAH
PLA

PLA environmental plastic from Plexiwire. 100% advance payment....

UAH 375.00
Buy ABS plastic (ABS)

ABS plastic from Plexiwire. 100% prepayment. Free shipping...

UAH 220.00
Mini motor reducer 12v 100 rpm

high torque mini electric motor. Its size...

150.00 UAH
Nozzle for 3D printer 1.75 mm, for E3D and MK8 hotends

Nozzle for 3D printer 1.75 mm 0.2/0.3/0.4/0.5

35.00 UAH
PETG plastic for 3D printer

PETG plastic from Plexiwire. 100% prepayment. Free...

UAH 360.00
SHF-20 shaft support

SHF-20 shaft support is used for CNC

60.00 UAH
A4988 stepper motor driver

35.00 UAH
Buy epo3d 3D printer

Ukrainian epo3d 3D printer built on the basis of modern kinematics...

UAH 18,000.00

All best sellers

Deburring Tool

This Tool works very well for removing support from the edges of a model. From practice, we can say that this is one of the most useful tools for cleaning parts. It is much easier and safer to use than a knife. It is especially useful when cleaning the edges of round holes.

Hobby Knife

This knife is ideal for precision cutting and trimming 3D printed projects in PLA, ABS, and most common materials. It should be very sharp, but always follow safety precautions.

Round Nose or Pliers

Effective for removing supports.
Such devices are useful both for the 3D printer itself and for the post-processing of a 3D printed model. Using them, you can easily separate the support with “Blocks” after cutting it with a knife. This will quickly clear the model.

Wood carving set

For fine cleaning of supports after printing, the wood carving set is ideal. It has different shapes of tips that in turn will fit any surface. And this means that with its help it is possible to easily clean the model in the most difficult and inaccessible places - these are the corners or semicircular sections of the part.

Super Glue

Indeed, its possibilities are endless. Super glue can be used to repair parts, fill gaps, or join assemblies or fixtures together. Remember: viscosity matters - use the right tool for the job. Use a thicker adhesive to fill gaps than when assembling delicate parts. Super glue works great with PLA and ABS.

Mini Files

A set of mini files in various shapes, perfect for sanding, smoothing or sharpening corners. It is designed to process various parts and bring them to the required characteristics.

Sanding paper

Sanding will create a smoother surface for your finished 3D models. Sanding works especially well if you plan on painting the object. Approximately 120 or 200 grit sandpaper should do the trick for any plastics. If you're an ABS fan, try sanding the print - it's great for this material.

The above tools are what you really need and will not be gathering dust around.

3D printer removal tool

F-FLEX (3D Part Removal Tool)

The information below reflects shipping weight and dimensions (if applicable)

Flashforge 3D Print Removal Tool (Spatula)

Description

Flashforge 3D Print Removal Tool

Additional Information

Related Products

EasyWood Pine - 1.

Galaxy PLA Ruby Red - 1.75mm 750g | Formfutura

Matt PLA Earth Red Camouflage - 1.75mm 750g | Formfutura

Matt PLA Olive Camouflage - 1.75mm 750g | Formfutura

Galaxy PLA Callisto Yellow - 1.75mm 750g | Formfutura

Customers Also Viewed

Bearing (V Type) for Extruder | Flashforge

Filament Drive Gear - Hardened Steel | Flashforge

Extruder Spring | Flashforge

3D printing tools. What you need to have on hand.

Spatula, scraper…

Deburring tool

Utility knife

Pliers, round nose pliers

Wood carving set

Super Glue

Files

Sanding (sanding) paper

Instead of a conclusion

Tool kit required for 3D printing

top sellers

Bearing 604UU U604ZZ

Thermal mat for 3D printing 200 x 200 mm

Buy epo3d+ 3D printer

ABS granules

PLA

Buy ABS plastic (ABS)

Mini motor reducer 12v 100 rpm

Nozzle for 3D printer 1.75 mm, for E3D and MK8 hotends

PETG plastic for 3D printer

SHF-20 shaft support

A4988 stepper motor driver

Buy epo3d 3D printer

categories

Deburring Tool

Hobby Knife

Round Nose or Pliers

Wood carving set

Super Glue

Sanding paper

Learn more